! Started logfile: J1510-0543_S_2009_05_13_pus_uvs.log on Sun Jan 22 11:38:10 2017 obs J1510-0543_S_2009_05_13_pus_uva.fits ! Reading UV FITS file: J1510-0543_S_2009_05_13_pus_uva.fits ! AN table 1: 64 integrations on 120 of 120 possible baselines. ! AN table 2: 122 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.213172 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1510-0543 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1341 lines of history. ! ! Reading 19032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1510-0543_S_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 662 telescope corrections were flagged in sub-array 1. ! A total of 1051 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 662 telescope corrections were flagged in sub-array 1. ! A total of 1051 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 662 telescope corrections were flagged in sub-array 1. ! A total of 1051 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 662 telescope corrections were flagged in sub-array 1. ! A total of 1051 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.815956Jy sigma=0.005475 ! Fit after self-cal, rms=0.752790Jy sigma=0.005141 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.999 mas, bmaj=4.441 mas, bpa=-12.21 degrees ! Estimated noise=1071.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200921 Jy ! Component: 100 - total flux cleaned = 0.256632 Jy ! Total flux subtracted in 100 components = 0.256632 Jy ! Clean residual min=-0.013831 max=0.052297 Jy/beam ! Clean residual mean=0.000276 rms=0.003650 Jy/beam ! Combined flux in latest and established models = 0.256632 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.256632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241976Jy sigma=0.001514 ! Fit after self-cal, rms=0.242067Jy sigma=0.001514 ! Inverting map ! Added new window around map position (17, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0465697 Jy ! Component: 100 - total flux cleaned = 0.0737733 Jy ! Total flux subtracted in 100 components = 0.0737733 Jy ! Clean residual min=-0.011799 max=0.023207 Jy/beam ! Clean residual mean=0.000110 rms=0.002791 Jy/beam ! Combined flux in latest and established models = 0.330405 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.330405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227584Jy sigma=0.001395 ! Fit after self-cal, rms=0.226564Jy sigma=0.001387 ! Inverting map ! Added new window around map position (14.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259332 Jy ! Component: 100 - total flux cleaned = 0.0442639 Jy ! Total flux subtracted in 100 components = 0.0442639 Jy ! Clean residual min=-0.009802 max=0.021126 Jy/beam ! Clean residual mean=0.000016 rms=0.002359 Jy/beam ! Combined flux in latest and established models = 0.374669 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.374669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220299Jy sigma=0.001336 ! Fit after self-cal, rms=0.220075Jy sigma=0.001334 ! Inverting map ! Added new window around map position (3, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203646 Jy ! Component: 100 - total flux cleaned = 0.0346664 Jy ! Total flux subtracted in 100 components = 0.0346664 Jy ! Clean residual min=-0.009029 max=0.013605 Jy/beam ! Clean residual mean=-0.000059 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.409335 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.409335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216316Jy sigma=0.001302 ! Fit after self-cal, rms=0.216165Jy sigma=0.001302 ! Inverting map ! Added new window around map position (11, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142337 Jy ! Component: 100 - total flux cleaned = 0.0245939 Jy ! Total flux subtracted in 100 components = 0.0245939 Jy ! Clean residual min=-0.007826 max=0.012034 Jy/beam ! Clean residual mean=-0.000111 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 0.433929 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.433929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214127Jy sigma=0.001285 ! Fit after self-cal, rms=0.214122Jy sigma=0.001285 ! Inverting map ! Added new window around map position (21, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119989 Jy ! Component: 100 - total flux cleaned = 0.0202679 Jy ! Total flux subtracted in 100 components = 0.0202679 Jy ! Clean residual min=-0.007698 max=0.010354 Jy/beam ! Clean residual mean=-0.000160 rms=0.001867 Jy/beam ! Combined flux in latest and established models = 0.454197 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.454197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212784Jy sigma=0.001273 ! Fit after self-cal, rms=0.212736Jy sigma=0.001273 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.401 mas, bmaj=5.471 mas, bpa=-11.62 degrees ! Estimated noise=770.606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017617 Jy ! Component: 100 - total flux cleaned = 0.0291041 Jy ! Component: 150 - total flux cleaned = 0.0370834 Jy ! Component: 200 - total flux cleaned = 0.0427172 Jy ! Total flux subtracted in 200 components = 0.0427172 Jy ! Clean residual min=-0.008032 max=0.009886 Jy/beam ! Clean residual mean=0.001006 rms=0.002516 Jy/beam ! Combined flux in latest and established models = 0.496914 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 0.496914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210953Jy sigma=0.001260 ! Fit after self-cal, rms=0.210862Jy sigma=0.001258 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.07 HN 1.00* HO 0.96 ! KK 1.05 KP 1.32 LA 0.72 MK 1.15 ! NL 1.11 NY 1.00* OV 1.08 PT 0.81 ! SC 1.00* TS 0.97 WZ 1.00* KB 0.88 ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.02 HN 1.05 HO 1.00* ! KK 1.08 KP 1.10 LA 0.96 MK 1.11 ! NL 1.01 NY 1.00* OV 0.94 PT 1.02 ! SC 0.95 TS 1.00* WZ 0.91 KB 1.00* ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 1.00* HO 0.95 ! KK 1.05 KP 1.26 LA 0.76 MK 1.12 ! NL 1.22 NY 1.00* OV 1.00 PT 0.83 ! SC 1.00* TS 0.95 WZ 1.00* KB 0.94 ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.98 HN 1.00 HO 1.00* ! KK 1.05 KP 1.10 LA 1.00 MK 1.06 ! NL 1.02 NY 1.00* OV 0.93 PT 1.01 ! SC 1.03 TS 1.00* WZ 1.02 KB 1.00* ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.00* HO 0.86 ! KK 1.05 KP 1.22 LA 0.78 MK 1.09 ! NL 1.16 NY 1.00* OV 1.08 PT 0.86 ! SC 1.00* TS 0.98 WZ 1.00* KB 0.99 ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.97 HN 1.02 HO 1.00* ! KK 1.05 KP 1.04 LA 1.01 MK 1.08 ! NL 1.02 NY 1.00* OV 1.01 PT 0.99 ! SC 0.98 TS 1.00* WZ 0.94 KB 1.00* ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 HN 1.00* HO 0.86 ! KK 1.08 KP 1.20 LA 0.79 MK 1.01 ! NL 1.14 NY 1.00* OV 1.07 PT 0.83 ! SC 1.00* TS 0.92 WZ 1.00* KB 1.06 ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.03 HN 0.97 HO 1.00* ! KK 1.17 KP 1.01 LA 1.00 MK 0.97 ! NL 1.00 NY 1.00* OV 0.91 PT 0.99 ! SC 0.93 TS 1.00* WZ 1.00 KB 1.00* ! ! ! Fit before self-cal, rms=0.210862Jy sigma=0.001258 ! Fit after self-cal, rms=0.209511Jy sigma=0.001236 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=5.362 mas, bpa=-11.46 degrees ! Estimated noise=767.647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286876 Jy ! Component: 100 - total flux cleaned = 0.00329242 Jy ! Component: 150 - total flux cleaned = 0.00353861 Jy ! Component: 200 - total flux cleaned = 0.00353814 Jy ! Total flux subtracted in 200 components = 0.00353814 Jy ! Clean residual min=-0.005712 max=0.009673 Jy/beam ! Clean residual mean=0.000786 rms=0.001931 Jy/beam ! Combined flux in latest and established models = 0.500452 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 0.500452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209349Jy sigma=0.001235 ! Fit after self-cal, rms=0.209646Jy sigma=0.001235 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209646Jy sigma=0.001235 ! Fit after self-cal, rms=0.222154Jy sigma=0.001177 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.325 mas, bmaj=5.411 mas, bpa=-10.18 degrees ! Estimated noise=766.386 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429966 Jy ! Component: 100 - total flux cleaned = 0.00485312 Jy ! Component: 150 - total flux cleaned = 0.00500741 Jy ! Component: 200 - total flux cleaned = 0.00514655 Jy ! Total flux subtracted in 200 components = 0.00514655 Jy ! Clean residual min=-0.006441 max=0.008431 Jy/beam ! Clean residual mean=0.000247 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 0.505599 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.505599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221950Jy sigma=0.001172 ! Fit after self-cal, rms=0.222352Jy sigma=0.001171 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (50, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00843243 Jy ! Component: 100 - total flux cleaned = 0.0113175 Jy ! Component: 150 - total flux cleaned = 0.0124109 Jy ! Component: 200 - total flux cleaned = 0.0132164 Jy ! Total flux subtracted in 200 components = 0.0132164 Jy ! Clean residual min=-0.005941 max=0.008021 Jy/beam ! Clean residual mean=0.000086 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.518815 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 123 components and 0.518815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221965Jy sigma=0.001166 ! Fit after self-cal, rms=0.221965Jy sigma=0.001166 ! Inverting map ! Added new window around map position (-59, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00744053 Jy ! Component: 100 - total flux cleaned = 0.0114742 Jy ! Component: 150 - total flux cleaned = 0.0139689 Jy ! Component: 200 - total flux cleaned = 0.0153463 Jy ! Total flux subtracted in 200 components = 0.0153463 Jy ! Clean residual min=-0.005956 max=0.006072 Jy/beam ! Clean residual mean=-0.000014 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.534162 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 140 components and 0.534162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221666Jy sigma=0.001163 ! Fit after self-cal, rms=0.221692Jy sigma=0.001163 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221692Jy sigma=0.001163 ! Fit after self-cal, rms=0.237726Jy sigma=0.001160 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.314 mas, bmaj=5.408 mas, bpa=-10.07 degrees ! Estimated noise=763.188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345429 Jy ! Component: 100 - total flux cleaned = 0.00528127 Jy ! Component: 150 - total flux cleaned = 0.00639964 Jy ! Component: 200 - total flux cleaned = 0.00720666 Jy ! Total flux subtracted in 200 components = 0.00720666 Jy ! Clean residual min=-0.006187 max=0.006498 Jy/beam ! Clean residual mean=0.000044 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.541368 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 153 components and 0.541368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237542Jy sigma=0.001158 ! Fit after self-cal, rms=0.238736Jy sigma=0.001158 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130244 Jy ! Component: 100 - total flux cleaned = 0.00203567 Jy ! Component: 150 - total flux cleaned = 0.00272023 Jy ! Component: 200 - total flux cleaned = 0.00326862 Jy ! Total flux subtracted in 200 components = 0.00326862 Jy ! Clean residual min=-0.006071 max=0.006485 Jy/beam ! Clean residual mean=0.000054 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 0.544637 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 163 components and 0.544637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238644Jy sigma=0.001157 ! Fit after self-cal, rms=0.238698Jy sigma=0.001157 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238698Jy sigma=0.001157 ! Fit after self-cal, rms=0.253636Jy sigma=0.001157 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.333 mas, bmaj=12.81 mas, bpa=-9.3 degrees ! Estimated noise=1009.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409548 Jy ! Component: 100 - total flux cleaned = 0.00647846 Jy ! Component: 150 - total flux cleaned = 0.00741521 Jy ! Component: 200 - total flux cleaned = 0.0077624 Jy ! Total flux subtracted in 200 components = 0.0077624 Jy ! Clean residual min=-0.008190 max=0.008383 Jy/beam ! Clean residual mean=0.000091 rms=0.002890 Jy/beam ! Combined flux in latest and established models = 0.552399 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 178 components and 0.552399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253638Jy sigma=0.001157 ! Fit after self-cal, rms=0.254467Jy sigma=0.001156 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134422 Jy ! Component: 100 - total flux cleaned = 0.00153091 Jy ! Component: 150 - total flux cleaned = 0.00170535 Jy ! Component: 200 - total flux cleaned = 0.00175939 Jy ! Total flux subtracted in 200 components = 0.00175939 Jy ! Clean residual min=-0.008009 max=0.008518 Jy/beam ! Clean residual mean=0.000118 rms=0.002864 Jy/beam ! Combined flux in latest and established models = 0.554159 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 180 components and 0.554158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254460Jy sigma=0.001157 ! Fit after self-cal, rms=0.254485Jy sigma=0.001157 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.31 mas, bmaj=5.421 mas, bpa=-9.923 degrees ! Estimated noise=761.856 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.31 x 5.421 at -9.923 degrees (North through East) ! Clean map min=-0.0059092 max=0.25172 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.922 mas, bmaj=4.392 mas, bpa=-10.54 degrees ! Estimated noise=1079.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192672 Jy ! Component: 100 - total flux cleaned = 0.264614 Jy ! Component: 150 - total flux cleaned = 0.31106 Jy ! Component: 200 - total flux cleaned = 0.344443 Jy ! Total flux subtracted in 200 components = 0.344443 Jy ! Clean residual min=-0.009872 max=0.019396 Jy/beam ! Clean residual mean=0.000319 rms=0.002598 Jy/beam ! Combined flux in latest and established models = 0.344443 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.344443 Jy ! Inverting map and beam ! Estimated beam: bmin=2.31 mas, bmaj=5.421 mas, bpa=-9.923 degrees ! Estimated noise=761.856 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481308 Jy ! Component: 100 - total flux cleaned = 0.0810492 Jy ! Component: 150 - total flux cleaned = 0.10429 Jy ! Component: 200 - total flux cleaned = 0.121075 Jy ! Total flux subtracted in 200 components = 0.121075 Jy ! Clean residual min=-0.007323 max=0.010357 Jy/beam ! Clean residual mean=0.000725 rms=0.002106 Jy/beam ! Combined flux in latest and established models = 0.465518 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 65 components and 0.465518 Jy ! Inverting map ! Added new window around map position (4.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132501 Jy ! Component: 100 - total flux cleaned = 0.024183 Jy ! Component: 150 - total flux cleaned = 0.0334962 Jy ! Component: 200 - total flux cleaned = 0.0415207 Jy ! Total flux subtracted in 200 components = 0.0415207 Jy ! Clean residual min=-0.006056 max=0.007020 Jy/beam ! Clean residual mean=0.000405 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.507038 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 91 components and 0.507038 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.333 mas, bmaj=12.81 mas, bpa=-9.3 degrees ! Estimated noise=1009.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119204 Jy ! Component: 100 - total flux cleaned = 0.0206556 Jy ! Component: 150 - total flux cleaned = 0.0274273 Jy ! Component: 200 - total flux cleaned = 0.0327734 Jy ! Total flux subtracted in 200 components = 0.0327734 Jy ! Clean residual min=-0.008413 max=0.008871 Jy/beam ! Clean residual mean=0.000367 rms=0.002942 Jy/beam ! Combined flux in latest and established models = 0.539812 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429539 Jy ! Component: 100 - total flux cleaned = 0.00699571 Jy ! Component: 150 - total flux cleaned = 0.00880777 Jy ! Component: 200 - total flux cleaned = 0.010176 Jy ! Total flux subtracted in 200 components = 0.010176 Jy ! Clean residual min=-0.008251 max=0.008653 Jy/beam ! Clean residual mean=0.000197 rms=0.002883 Jy/beam ! Combined flux in latest and established models = 0.549988 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 161 components and 0.549988 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.31 mas, bmaj=5.421 mas, bpa=-9.923 degrees ! Estimated noise=761.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137861 Jy ! Component: 100 - total flux cleaned = 0.000133553 Jy ! Component: 150 - total flux cleaned = 0.000268786 Jy ! Component: 200 - total flux cleaned = 0.000270835 Jy ! Total flux subtracted in 200 components = 0.000270835 Jy ! Clean residual min=-0.005945 max=0.006494 Jy/beam ! Clean residual mean=0.000082 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.550259 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 174 components and 0.550259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254653Jy sigma=0.001157 ! Fit after self-cal, rms=0.254944Jy sigma=0.001157 wmodel J1510-0543_S_2009_05_13_pus_map.mod ! Writing 174 model components to file: J1510-0543_S_2009_05_13_pus_map.mod wobs J1510-0543_S_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J1510-0543_S_2009_05_13_pus_uvs.fits wwins J1510-0543_S_2009_05_13_pus_map.win ! wwins: Wrote 10 windows to J1510-0543_S_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285602 Jy ! Component: 100 - total flux cleaned = 0.0032878 Jy ! Component: 150 - total flux cleaned = 0.00349057 Jy ! Component: 200 - total flux cleaned = 0.00359153 Jy ! Component: 250 - total flux cleaned = 0.00368983 Jy ! Component: 300 - total flux cleaned = 0.00369166 Jy ! Component: 350 - total flux cleaned = 0.00415002 Jy ! Component: 400 - total flux cleaned = 0.00459707 Jy ! Component: 450 - total flux cleaned = 0.0046845 Jy ! Component: 500 - total flux cleaned = 0.0049452 Jy ! Component: 550 - total flux cleaned = 0.00537049 Jy ! Component: 600 - total flux cleaned = 0.00553819 Jy ! Component: 650 - total flux cleaned = 0.00586834 Jy ! Component: 700 - total flux cleaned = 0.00619448 Jy ! Component: 750 - total flux cleaned = 0.00635528 Jy ! Component: 800 - total flux cleaned = 0.00667439 Jy ! Component: 850 - total flux cleaned = 0.00706691 Jy ! Component: 900 - total flux cleaned = 0.00745392 Jy ! Component: 950 - total flux cleaned = 0.00753065 Jy ! Component: 1000 - total flux cleaned = 0.00790915 Jy ! Component: 1050 - total flux cleaned = 0.00798445 Jy ! Component: 1100 - total flux cleaned = 0.00828126 Jy ! Component: 1150 - total flux cleaned = 0.00842731 Jy ! Component: 1200 - total flux cleaned = 0.00842678 Jy ! Component: 1250 - total flux cleaned = 0.00864245 Jy ! Component: 1300 - total flux cleaned = 0.00892642 Jy ! Component: 1350 - total flux cleaned = 0.00906684 Jy ! Component: 1400 - total flux cleaned = 0.00920599 Jy ! Component: 1450 - total flux cleaned = 0.00948216 Jy ! Component: 1500 - total flux cleaned = 0.00961843 Jy ! Component: 1550 - total flux cleaned = 0.00975409 Jy ! Component: 1600 - total flux cleaned = 0.00988785 Jy ! Component: 1650 - total flux cleaned = 0.0101535 Jy ! Component: 1700 - total flux cleaned = 0.0101531 Jy ! Component: 1750 - total flux cleaned = 0.010284 Jy ! Component: 1800 - total flux cleaned = 0.0104778 Jy ! Component: 1850 - total flux cleaned = 0.0105426 Jy ! Component: 1900 - total flux cleaned = 0.0105431 Jy ! Component: 1950 - total flux cleaned = 0.010796 Jy ! Component: 2000 - total flux cleaned = 0.0109214 Jy ! Component: 2050 - total flux cleaned = 0.01117 Jy ! Component: 2100 - total flux cleaned = 0.0112313 Jy ! Component: 2150 - total flux cleaned = 0.011354 Jy ! Component: 2200 - total flux cleaned = 0.0115356 Jy ! Component: 2250 - total flux cleaned = 0.0115958 Jy ! Component: 2300 - total flux cleaned = 0.0117157 Jy ! Component: 2350 - total flux cleaned = 0.0118348 Jy ! Component: 2400 - total flux cleaned = 0.0120716 Jy ! Component: 2450 - total flux cleaned = 0.0121303 Jy ! Component: 2500 - total flux cleaned = 0.0124213 Jy ! Component: 2550 - total flux cleaned = 0.0125949 Jy ! Component: 2600 - total flux cleaned = 0.012537 Jy ! Component: 2650 - total flux cleaned = 0.0127655 Jy ! Component: 2700 - total flux cleaned = 0.0129926 Jy ! Component: 2750 - total flux cleaned = 0.0131053 Jy ! Component: 2800 - total flux cleaned = 0.0132734 Jy ! Component: 2850 - total flux cleaned = 0.0133846 Jy ! Component: 2900 - total flux cleaned = 0.0134951 Jy ! Component: 2950 - total flux cleaned = 0.0136602 Jy ! Component: 3000 - total flux cleaned = 0.0138241 Jy ! Component: 3050 - total flux cleaned = 0.0138243 Jy ! Component: 3100 - total flux cleaned = 0.0140943 Jy ! Component: 3150 - total flux cleaned = 0.0143088 Jy ! Component: 3200 - total flux cleaned = 0.0143623 Jy ! Component: 3250 - total flux cleaned = 0.0144685 Jy ! Component: 3300 - total flux cleaned = 0.0145209 Jy ! Component: 3350 - total flux cleaned = 0.014783 Jy ! Component: 3400 - total flux cleaned = 0.0147828 Jy ! Component: 3450 - total flux cleaned = 0.0149386 Jy ! Component: 3500 - total flux cleaned = 0.0151445 Jy ! Component: 3550 - total flux cleaned = 0.0151444 Jy ! Component: 3600 - total flux cleaned = 0.0153999 Jy ! Component: 3650 - total flux cleaned = 0.0155518 Jy ! Component: 3700 - total flux cleaned = 0.0156023 Jy ! Component: 3750 - total flux cleaned = 0.015803 Jy ! Component: 3800 - total flux cleaned = 0.0159029 Jy ! Component: 3850 - total flux cleaned = 0.0159526 Jy ! Component: 3900 - total flux cleaned = 0.0161505 Jy ! Component: 3950 - total flux cleaned = 0.0161014 Jy ! Component: 4000 - total flux cleaned = 0.0163461 Jy ! Component: 4050 - total flux cleaned = 0.0163947 Jy ! Total flux subtracted in 4096 components = 0.0165886 Jy ! Clean residual min=-0.002988 max=0.003110 Jy/beam ! Clean residual mean=0.000021 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.566847 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 508 components and 0.566847 Jy ![Exited script file: muppet] wmap "J1510-0543_S_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.31 x 5.421 at -9.923 degrees (North through East) ! Clean map min=-0.0044572 max=0.25022 Jy/beam ! Writing clean map to FITS file: J1510-0543_S_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.250225 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000914078 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09591 1.09591 2.19181 4.38363 8.76725 17.5345 35.069 70.138 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.25 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.31 x 5.421 at -9.923 degrees (North through East) ! Clean map min=-0.0044572 max=0.25022 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1510-0543_S_2009_05_13_pus_uvs.log closed on Sun Jan 22 11:38:17 2017