! Started logfile: J1349-3056_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:43:30 2017 obs J1349-3056_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J1349-3056_X_2009_05_13_pus_uva.fits ! AN table 1: 96 integrations on 120 of 120 possible baselines. ! AN table 2: 94 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.39636 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1349-3056 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 36148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1349-3056_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 521 telescope corrections were flagged in sub-array 1. ! A total of 581 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 619 telescope corrections were flagged in sub-array 1. ! A total of 581 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 709 telescope corrections were flagged in sub-array 1. ! A total of 581 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 709 telescope corrections were flagged in sub-array 1. ! A total of 581 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.934144Jy sigma=0.007391 ! Fit after self-cal, rms=0.887395Jy sigma=0.007076 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6125 mas, bmaj=0.9857 mas, bpa=-28.87 degrees ! Estimated noise=1127.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0893334 Jy ! Component: 100 - total flux cleaned = 0.120878 Jy ! Total flux subtracted in 100 components = 0.120878 Jy ! Clean residual min=-0.009363 max=0.025196 Jy/beam ! Clean residual mean=-0.000062 rms=0.002874 Jy/beam ! Combined flux in latest and established models = 0.120878 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.120878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170888Jy sigma=0.001184 ! Fit after self-cal, rms=0.170688Jy sigma=0.001182 ! Inverting map ! Added new window around map position (-1, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0254123 Jy ! Component: 100 - total flux cleaned = 0.04049 Jy ! Total flux subtracted in 100 components = 0.04049 Jy ! Clean residual min=-0.008302 max=0.021206 Jy/beam ! Clean residual mean=-0.000011 rms=0.002182 Jy/beam ! Combined flux in latest and established models = 0.161368 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.161368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166025Jy sigma=0.001133 ! Fit after self-cal, rms=0.165474Jy sigma=0.001127 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014539 Jy ! Component: 100 - total flux cleaned = 0.0181686 Jy ! Total flux subtracted in 100 components = 0.0181686 Jy ! Clean residual min=-0.006801 max=0.012985 Jy/beam ! Clean residual mean=0.000011 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.179536 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 20 components and 0.179536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164053Jy sigma=0.001116 ! Fit after self-cal, rms=0.163643Jy sigma=0.001112 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081808 Jy ! Component: 100 - total flux cleaned = 0.00902054 Jy ! Total flux subtracted in 100 components = 0.00902054 Jy ! Clean residual min=-0.006053 max=0.008789 Jy/beam ! Clean residual mean=0.000022 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 0.188557 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.188557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162988Jy sigma=0.001108 ! Fit after self-cal, rms=0.162669Jy sigma=0.001106 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050523 Jy ! Component: 100 - total flux cleaned = 0.00480598 Jy ! Total flux subtracted in 100 components = 0.00480598 Jy ! Clean residual min=-0.005755 max=0.006290 Jy/beam ! Clean residual mean=0.000028 rms=0.001479 Jy/beam ! Combined flux in latest and established models = 0.193363 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.193363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162285Jy sigma=0.001104 ! Fit after self-cal, rms=0.162085Jy sigma=0.001102 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.851 mas, bmaj=1.394 mas, bpa=-15.64 degrees ! Estimated noise=506.066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003894 Jy ! Component: 100 - total flux cleaned = 0.00400751 Jy ! Component: 150 - total flux cleaned = 0.00369764 Jy ! Component: 200 - total flux cleaned = 0.00362759 Jy ! Total flux subtracted in 200 components = 0.00362759 Jy ! Clean residual min=-0.003483 max=0.003622 Jy/beam ! Clean residual mean=0.000020 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.19699 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.196991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161848Jy sigma=0.001101 ! Fit after self-cal, rms=0.161716Jy sigma=0.001100 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.04 HO 0.91 ! KK 1.00* KP 1.01 LA 1.03 MK 1.04 ! NL 1.10 NY 1.00* OV 0.98 PT 0.99 ! SC 1.03 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 0.96 HO 1.00* ! KK 1.00* KP 1.04 LA 0.99 MK 0.94 ! NL 1.05 NY 1.00* OV 1.03 PT 0.96 ! SC 0.95 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.04 HO 0.89 ! KK 1.00* KP 0.96 LA 1.02 MK 1.00* ! NL 1.05 NY 1.00* OV 0.96 PT 1.03 ! SC 0.95 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.95 HN 1.05 HO 1.00* ! KK 1.00* KP 0.94 LA 0.99 MK 0.90 ! NL 0.99 NY 1.00* OV 0.97 PT 1.06 ! SC 1.00 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.91 HO 1.00* ! KK 1.00* KP 1.00 LA 1.05 MK 1.00* ! NL 1.04 NY 1.00* OV 0.98 PT 1.02 ! SC 1.00 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.95 HN 0.95 HO 1.00* ! KK 1.00* KP 1.00 LA 1.04 MK 0.84 ! NL 1.03 NY 1.00* OV 1.04 PT 1.03 ! SC 1.00 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.76 HO 1.00* ! KK 1.00* KP 0.98 LA 1.01 MK 1.00* ! NL 1.09 NY 1.00* OV 1.03 PT 1.02 ! SC 0.90 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.96 HN 0.84 HO 1.00* ! KK 1.00* KP 1.02 LA 1.00 MK 0.78 ! NL 0.96 NY 1.00* OV 1.01 PT 1.03 ! SC 1.01 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Fit before self-cal, rms=0.161716Jy sigma=0.001100 ! Fit after self-cal, rms=0.154755Jy sigma=0.001098 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8305 mas, bmaj=1.362 mas, bpa=-17.5 degrees ! Estimated noise=494.293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103897 Jy ! Component: 100 - total flux cleaned = 0.00105672 Jy ! Component: 150 - total flux cleaned = 0.00101959 Jy ! Component: 200 - total flux cleaned = 0.000850842 Jy ! Total flux subtracted in 200 components = 0.000850842 Jy ! Clean residual min=-0.003270 max=0.002652 Jy/beam ! Clean residual mean=0.000007 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.197841 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.197841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154644Jy sigma=0.001098 ! Fit after self-cal, rms=0.154536Jy sigma=0.001097 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154536Jy sigma=0.001097 ! Fit after self-cal, rms=0.152255Jy sigma=0.001097 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8256 mas, bmaj=1.366 mas, bpa=-17.42 degrees ! Estimated noise=488.935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711097 Jy ! Component: 100 - total flux cleaned = 0.000789133 Jy ! Component: 150 - total flux cleaned = 0.000748335 Jy ! Component: 200 - total flux cleaned = 0.000594769 Jy ! Total flux subtracted in 200 components = 0.000594769 Jy ! Clean residual min=-0.002968 max=0.002395 Jy/beam ! Clean residual mean=0.000007 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.198436 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.198436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152174Jy sigma=0.001096 ! Fit after self-cal, rms=0.152135Jy sigma=0.001096 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729797 Jy ! Component: 100 - total flux cleaned = 0.000726067 Jy ! Component: 150 - total flux cleaned = 0.000604514 Jy ! Component: 200 - total flux cleaned = 0.000462364 Jy ! Total flux subtracted in 200 components = 0.000462364 Jy ! Clean residual min=-0.002774 max=0.002118 Jy/beam ! Clean residual mean=0.000008 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.198898 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.198898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152083Jy sigma=0.001096 ! Fit after self-cal, rms=0.152055Jy sigma=0.001096 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152055Jy sigma=0.001096 ! Fit after self-cal, rms=0.150062Jy sigma=0.001096 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8233 mas, bmaj=1.371 mas, bpa=-17.17 degrees ! Estimated noise=484.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417155 Jy ! Component: 100 - total flux cleaned = 0.000461456 Jy ! Component: 150 - total flux cleaned = 0.000391302 Jy ! Component: 200 - total flux cleaned = 0.000275897 Jy ! Total flux subtracted in 200 components = 0.000275897 Jy ! Clean residual min=-0.002527 max=0.002171 Jy/beam ! Clean residual mean=0.000007 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.199174 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.199174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150022Jy sigma=0.001095 ! Fit after self-cal, rms=0.149997Jy sigma=0.001095 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208571 Jy ! Component: 100 - total flux cleaned = 0.000128579 Jy ! Component: 150 - total flux cleaned = 9.91101e-05 Jy ! Component: 200 - total flux cleaned = 9.8895e-05 Jy ! Total flux subtracted in 200 components = 9.8895e-05 Jy ! Clean residual min=-0.002360 max=0.002187 Jy/beam ! Clean residual mean=0.000007 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.199273 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.199273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149972Jy sigma=0.001095 ! Fit after self-cal, rms=0.149969Jy sigma=0.001095 ! Inverting map ! Added new window around map position (6.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126935 Jy ! Component: 100 - total flux cleaned = 0.00111754 Jy ! Component: 150 - total flux cleaned = 0.000941608 Jy ! Component: 200 - total flux cleaned = 0.000782022 Jy ! Total flux subtracted in 200 components = 0.000782022 Jy ! Clean residual min=-0.002198 max=0.002017 Jy/beam ! Clean residual mean=0.000011 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.200055 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.200055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149924Jy sigma=0.001095 ! Fit after self-cal, rms=0.149929Jy sigma=0.001095 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149929Jy sigma=0.001095 ! Fit after self-cal, rms=0.148961Jy sigma=0.001095 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=6.031 mas, bpa=-0.6621 degrees ! Estimated noise=615.793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.4126e-05 Jy ! Component: 100 - total flux cleaned = -4.23622e-05 Jy ! Component: 150 - total flux cleaned = -9.21548e-05 Jy ! Component: 200 - total flux cleaned = -0.000137289 Jy ! Total flux subtracted in 200 components = -0.000137289 Jy ! Clean residual min=-0.001582 max=0.002167 Jy/beam ! Clean residual mean=0.000016 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.199918 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 0.199918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148952Jy sigma=0.001095 ! Fit after self-cal, rms=0.148945Jy sigma=0.001094 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80273e-05 Jy ! Component: 100 - total flux cleaned = -8.69427e-06 Jy ! Component: 150 - total flux cleaned = -5.16716e-05 Jy ! Component: 200 - total flux cleaned = -9.07148e-05 Jy ! Total flux subtracted in 200 components = -9.07148e-05 Jy ! Clean residual min=-0.001575 max=0.002146 Jy/beam ! Clean residual mean=0.000015 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.199827 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 90 components and 0.199827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148939Jy sigma=0.001094 ! Fit after self-cal, rms=0.148940Jy sigma=0.001094 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8229 mas, bmaj=1.373 mas, bpa=-17.1 degrees ! Estimated noise=482.992 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8229 x 1.373 at -17.1 degrees (North through East) ! Clean map min=-0.0019316 max=0.088757 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5965 mas, bmaj=0.9896 mas, bpa=-29.22 degrees ! Estimated noise=1068.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0855436 Jy ! Component: 100 - total flux cleaned = 0.129958 Jy ! Component: 150 - total flux cleaned = 0.155518 Jy ! Component: 200 - total flux cleaned = 0.171885 Jy ! Total flux subtracted in 200 components = 0.171885 Jy ! Clean residual min=-0.005583 max=0.009512 Jy/beam ! Clean residual mean=-0.000010 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 0.171885 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.171885 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8229 mas, bmaj=1.373 mas, bpa=-17.1 degrees ! Estimated noise=482.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131361 Jy ! Component: 100 - total flux cleaned = 0.0200653 Jy ! Component: 150 - total flux cleaned = 0.0240896 Jy ! Component: 200 - total flux cleaned = 0.0257736 Jy ! Total flux subtracted in 200 components = 0.0257736 Jy ! Clean residual min=-0.002544 max=0.003138 Jy/beam ! Clean residual mean=0.000002 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.197659 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 39 components and 0.197659 Jy ! Inverting map ! Added new window around map position (1.1, -1.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113715 Jy ! Component: 100 - total flux cleaned = 0.0018746 Jy ! Component: 150 - total flux cleaned = 0.00211561 Jy ! Component: 200 - total flux cleaned = 0.00240755 Jy ! Total flux subtracted in 200 components = 0.00240755 Jy ! Clean residual min=-0.002285 max=0.002289 Jy/beam ! Clean residual mean=0.000008 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.200066 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 0.200066 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=6.031 mas, bpa=-0.6621 degrees ! Estimated noise=615.793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050281 Jy ! Component: 100 - total flux cleaned = 0.000528742 Jy ! Component: 150 - total flux cleaned = 0.000510488 Jy ! Component: 200 - total flux cleaned = 0.000494016 Jy ! Total flux subtracted in 200 components = 0.000494016 Jy ! Clean residual min=-0.001700 max=0.002093 Jy/beam ! Clean residual mean=0.000017 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.20056 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.88825e-07 Jy ! Component: 100 - total flux cleaned = -1.56709e-05 Jy ! Component: 150 - total flux cleaned = -1.60181e-05 Jy ! Component: 200 - total flux cleaned = -2.94063e-05 Jy ! Total flux subtracted in 200 components = -2.94063e-05 Jy ! Clean residual min=-0.001680 max=0.002094 Jy/beam ! Clean residual mean=0.000017 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.200531 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.200531 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8229 mas, bmaj=1.373 mas, bpa=-17.1 degrees ! Estimated noise=482.992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000420306 Jy ! Component: 100 - total flux cleaned = -0.000481759 Jy ! Component: 150 - total flux cleaned = -0.000481888 Jy ! Component: 200 - total flux cleaned = -0.000486068 Jy ! Total flux subtracted in 200 components = -0.000486068 Jy ! Clean residual min=-0.002248 max=0.002171 Jy/beam ! Clean residual mean=0.000008 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.200045 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.200045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149159Jy sigma=0.001095 ! Fit after self-cal, rms=0.149201Jy sigma=0.001095 wmodel J1349-3056_X_2009_05_13_pus_map.mod ! Writing 78 model components to file: J1349-3056_X_2009_05_13_pus_map.mod wobs J1349-3056_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J1349-3056_X_2009_05_13_pus_uvs.fits wwins J1349-3056_X_2009_05_13_pus_map.win ! wwins: Wrote 4 windows to J1349-3056_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000427297 Jy ! Component: 100 - total flux cleaned = -0.00072631 Jy ! Component: 150 - total flux cleaned = -0.000867251 Jy ! Component: 200 - total flux cleaned = -0.001101 Jy ! Component: 250 - total flux cleaned = -0.00126179 Jy ! Component: 300 - total flux cleaned = -0.0013868 Jy ! Component: 350 - total flux cleaned = -0.00150882 Jy ! Component: 400 - total flux cleaned = -0.00162724 Jy ! Component: 450 - total flux cleaned = -0.00174316 Jy ! Component: 500 - total flux cleaned = -0.00185632 Jy ! Component: 550 - total flux cleaned = -0.0018562 Jy ! Component: 600 - total flux cleaned = -0.00193869 Jy ! Component: 650 - total flux cleaned = -0.00199244 Jy ! Component: 700 - total flux cleaned = -0.00196616 Jy ! Component: 750 - total flux cleaned = -0.00204413 Jy ! Component: 800 - total flux cleaned = -0.00199274 Jy ! Component: 850 - total flux cleaned = -0.00201815 Jy ! Component: 900 - total flux cleaned = -0.00199339 Jy ! Component: 950 - total flux cleaned = -0.0020426 Jy ! Component: 1000 - total flux cleaned = -0.0019943 Jy ! Component: 1050 - total flux cleaned = -0.00199434 Jy ! Component: 1100 - total flux cleaned = -0.001971 Jy ! Component: 1150 - total flux cleaned = -0.00204051 Jy ! Component: 1200 - total flux cleaned = -0.00201792 Jy ! Component: 1250 - total flux cleaned = -0.00208593 Jy ! Component: 1300 - total flux cleaned = -0.00213073 Jy ! Component: 1350 - total flux cleaned = -0.00224104 Jy ! Component: 1400 - total flux cleaned = -0.00217525 Jy ! Component: 1450 - total flux cleaned = -0.00221897 Jy ! Component: 1500 - total flux cleaned = -0.00221901 Jy ! Component: 1550 - total flux cleaned = -0.00213412 Jy ! Component: 1600 - total flux cleaned = -0.00213408 Jy ! Component: 1650 - total flux cleaned = -0.00213364 Jy ! Component: 1700 - total flux cleaned = -0.00213365 Jy ! Component: 1750 - total flux cleaned = -0.00209309 Jy ! Component: 1800 - total flux cleaned = -0.00215389 Jy ! Component: 1850 - total flux cleaned = -0.00209381 Jy ! Component: 1900 - total flux cleaned = -0.00209398 Jy ! Component: 1950 - total flux cleaned = -0.00211351 Jy ! Component: 2000 - total flux cleaned = -0.00209374 Jy ! Component: 2050 - total flux cleaned = -0.00207459 Jy ! Component: 2100 - total flux cleaned = -0.00205526 Jy ! Component: 2150 - total flux cleaned = -0.00207446 Jy ! Component: 2200 - total flux cleaned = -0.00201787 Jy ! Component: 2250 - total flux cleaned = -0.00203632 Jy ! Component: 2300 - total flux cleaned = -0.00192454 Jy ! Component: 2350 - total flux cleaned = -0.00194315 Jy ! Component: 2400 - total flux cleaned = -0.00190637 Jy ! Component: 2450 - total flux cleaned = -0.00186991 Jy ! Component: 2500 - total flux cleaned = -0.00185194 Jy ! Component: 2550 - total flux cleaned = -0.00185203 Jy ! Component: 2600 - total flux cleaned = -0.00183409 Jy ! Component: 2650 - total flux cleaned = -0.0017985 Jy ! Component: 2700 - total flux cleaned = -0.00176325 Jy ! Component: 2750 - total flux cleaned = -0.00174571 Jy ! Component: 2800 - total flux cleaned = -0.0017979 Jy ! Component: 2850 - total flux cleaned = -0.00169421 Jy ! Component: 2900 - total flux cleaned = -0.00174573 Jy ! Component: 2950 - total flux cleaned = -0.0017117 Jy ! Component: 3000 - total flux cleaned = -0.00166079 Jy ! Component: 3050 - total flux cleaned = -0.00169452 Jy ! Component: 3100 - total flux cleaned = -0.0016779 Jy ! Component: 3150 - total flux cleaned = -0.00171128 Jy ! Component: 3200 - total flux cleaned = -0.00172791 Jy ! Component: 3250 - total flux cleaned = -0.00176089 Jy ! Component: 3300 - total flux cleaned = -0.00169553 Jy ! Component: 3350 - total flux cleaned = -0.00166304 Jy ! Component: 3400 - total flux cleaned = -0.00171157 Jy ! Component: 3450 - total flux cleaned = -0.0016795 Jy ! Component: 3500 - total flux cleaned = -0.0016475 Jy ! Component: 3550 - total flux cleaned = -0.00158405 Jy ! Component: 3600 - total flux cleaned = -0.00158396 Jy ! Component: 3650 - total flux cleaned = -0.00159969 Jy ! Component: 3700 - total flux cleaned = -0.00156852 Jy ! Component: 3750 - total flux cleaned = -0.00153752 Jy ! Component: 3800 - total flux cleaned = -0.00155299 Jy ! Component: 3850 - total flux cleaned = -0.0015528 Jy ! Component: 3900 - total flux cleaned = -0.00147634 Jy ! Component: 3950 - total flux cleaned = -0.00147628 Jy ! Component: 4000 - total flux cleaned = -0.00149133 Jy ! Component: 4050 - total flux cleaned = -0.0014461 Jy ! Total flux subtracted in 4096 components = -0.00138625 Jy ! Clean residual min=-0.001021 max=0.000808 Jy/beam ! Clean residual mean=0.000002 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.198658 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 345 components and 0.198658 Jy ![Exited script file: muppet] wmap "J1349-3056_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8229 x 1.373 at -17.1 degrees (North through East) ! Clean map min=-0.0019508 max=0.083864 Jy/beam ! Writing clean map to FITS file: J1349-3056_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0838636 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000266521 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.95341 0.95341 1.90682 3.81364 7.62728 15.2546 30.5091 61.0183 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8229 x 1.373 at -17.1 degrees (North through East) ! Clean map min=-0.0019508 max=0.083864 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1349-3056_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:43:37 2017