! Started logfile: J1304-2106_S_2009_05_13_pus_uvs.log on Sun Jan 22 11:36:51 2017 obs J1304-2106_S_2009_05_13_pus_uva.fits ! Reading UV FITS file: J1304-2106_S_2009_05_13_pus_uva.fits ! AN table 1: 93 integrations on 120 of 120 possible baselines. ! AN table 2: 94 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.409314 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1304-2106 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1341 lines of history. ! ! Reading 36740 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1304-2106_S_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 567 telescope corrections were flagged in sub-array 1. ! A total of 480 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 567 telescope corrections were flagged in sub-array 1. ! A total of 480 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 567 telescope corrections were flagged in sub-array 1. ! A total of 480 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 567 telescope corrections were flagged in sub-array 1. ! A total of 480 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.995744Jy sigma=0.006987 ! Fit after self-cal, rms=0.920618Jy sigma=0.006502 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.862 mas, bmaj=3.483 mas, bpa=-41.22 degrees ! Estimated noise=1253.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0724353 Jy ! Component: 100 - total flux cleaned = 0.090918 Jy ! Total flux subtracted in 100 components = 0.090918 Jy ! Clean residual min=-0.007464 max=0.013921 Jy/beam ! Clean residual mean=-0.000036 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.090918 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.090918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185381Jy sigma=0.001134 ! Fit after self-cal, rms=0.184802Jy sigma=0.001130 ! Inverting map ! Added new window around map position (17, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131776 Jy ! Component: 100 - total flux cleaned = 0.021654 Jy ! Total flux subtracted in 100 components = 0.021654 Jy ! Clean residual min=-0.007205 max=0.007110 Jy/beam ! Clean residual mean=-0.000027 rms=0.001638 Jy/beam ! Combined flux in latest and established models = 0.112572 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.112572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183727Jy sigma=0.001120 ! Fit after self-cal, rms=0.183552Jy sigma=0.001119 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0098864 Jy ! Component: 100 - total flux cleaned = 0.0161782 Jy ! Total flux subtracted in 100 components = 0.0161782 Jy ! Clean residual min=-0.007474 max=0.006414 Jy/beam ! Clean residual mean=-0.000021 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.12875 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 0.12875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183020Jy sigma=0.001113 ! Fit after self-cal, rms=0.182908Jy sigma=0.001112 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=4.591 mas, bpa=-28.83 degrees ! Estimated noise=533.656 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00765785 Jy ! Component: 100 - total flux cleaned = 0.0124027 Jy ! Component: 150 - total flux cleaned = 0.0156847 Jy ! Component: 200 - total flux cleaned = 0.0179747 Jy ! Total flux subtracted in 200 components = 0.0179747 Jy ! Clean residual min=-0.003914 max=0.005615 Jy/beam ! Clean residual mean=-0.000022 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.146725 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 37 components and 0.146725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182563Jy sigma=0.001109 ! Fit after self-cal, rms=0.182452Jy sigma=0.001108 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.19 HO 1.00* ! KK 1.00* KP 1.07 LA 0.92 MK 0.98 ! NL 0.92 NY 1.00* OV 1.03 PT 1.00 ! SC 1.04 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.06 HN 1.04 HO 0.82 ! KK 1.00* KP 0.86 LA 0.92 MK 1.06 ! NL 1.07 NY 1.00* OV 0.98 PT 0.96 ! SC 0.98 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 0.96 HO 1.00* ! KK 1.00* KP 0.97 LA 0.92 MK 1.05 ! NL 1.02 NY 1.00* OV 1.13 PT 1.02 ! SC 1.02 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 0.94 HO 1.00 ! KK 1.00* KP 1.02 LA 0.96 MK 1.11 ! NL 0.99 NY 1.00* OV 1.01 PT 1.00 ! SC 1.02 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 1.00 HO 1.00* ! KK 1.00* KP 1.08 LA 0.93 MK 1.07 ! NL 1.00 NY 1.00* OV 1.16 PT 0.98 ! SC 1.02 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.02 HN 1.10 HO 1.00 ! KK 1.00* KP 1.05 LA 0.96 MK 0.97 ! NL 1.05 NY 1.00* OV 1.03 PT 0.95 ! SC 1.09 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 0.90 HO 1.00* ! KK 1.00* KP 0.98 LA 0.97 MK 0.87 ! NL 0.95 NY 1.00* OV 1.05 PT 1.02 ! SC 0.97 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.03 HN 0.89 HO 0.92 ! KK 1.00* KP 0.99 LA 0.98 MK 1.09 ! NL 1.00 NY 1.00* OV 1.00 PT 0.96 ! SC 0.99 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Fit before self-cal, rms=0.182452Jy sigma=0.001108 ! Fit after self-cal, rms=0.177005Jy sigma=0.001107 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=4.564 mas, bpa=-30.6 degrees ! Estimated noise=530.001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (36, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00530548 Jy ! Component: 100 - total flux cleaned = 0.00839232 Jy ! Component: 150 - total flux cleaned = 0.0105544 Jy ! Component: 200 - total flux cleaned = 0.0122267 Jy ! Total flux subtracted in 200 components = 0.0122267 Jy ! Clean residual min=-0.002975 max=0.003278 Jy/beam ! Clean residual mean=-0.000010 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.158952 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.158951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176848Jy sigma=0.001105 ! Fit after self-cal, rms=0.176712Jy sigma=0.001105 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176712Jy sigma=0.001105 ! Fit after self-cal, rms=0.176353Jy sigma=0.001105 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.663 mas, bmaj=4.555 mas, bpa=-30.89 degrees ! Estimated noise=529.164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298087 Jy ! Component: 100 - total flux cleaned = 0.0047723 Jy ! Component: 150 - total flux cleaned = 0.00593905 Jy ! Component: 200 - total flux cleaned = 0.00653991 Jy ! Total flux subtracted in 200 components = 0.00653991 Jy ! Clean residual min=-0.002842 max=0.003077 Jy/beam ! Clean residual mean=-0.000004 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.165491 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.165491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176297Jy sigma=0.001104 ! Fit after self-cal, rms=0.176259Jy sigma=0.001104 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307001 Jy ! Component: 100 - total flux cleaned = 0.00488978 Jy ! Component: 150 - total flux cleaned = 0.00596922 Jy ! Component: 200 - total flux cleaned = 0.00642579 Jy ! Total flux subtracted in 200 components = 0.00642579 Jy ! Clean residual min=-0.002696 max=0.002732 Jy/beam ! Clean residual mean=0.000000 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.171917 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 90 components and 0.171917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176193Jy sigma=0.001103 ! Fit after self-cal, rms=0.176147Jy sigma=0.001103 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176147Jy sigma=0.001103 ! Fit after self-cal, rms=0.175495Jy sigma=0.001103 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=4.534 mas, bpa=-31.13 degrees ! Estimated noise=529.045 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201463 Jy ! Component: 100 - total flux cleaned = 0.00340779 Jy ! Component: 150 - total flux cleaned = 0.0039252 Jy ! Component: 200 - total flux cleaned = 0.00417905 Jy ! Total flux subtracted in 200 components = 0.00417905 Jy ! Clean residual min=-0.002737 max=0.002560 Jy/beam ! Clean residual mean=0.000004 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.176096 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 94 components and 0.176096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175459Jy sigma=0.001103 ! Fit after self-cal, rms=0.175425Jy sigma=0.001103 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011232 Jy ! Component: 100 - total flux cleaned = 0.00147475 Jy ! Component: 150 - total flux cleaned = 0.00167469 Jy ! Component: 200 - total flux cleaned = 0.00178482 Jy ! Total flux subtracted in 200 components = 0.00178482 Jy ! Clean residual min=-0.002753 max=0.002579 Jy/beam ! Clean residual mean=0.000005 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.177881 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 97 components and 0.177881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175402Jy sigma=0.001103 ! Fit after self-cal, rms=0.175392Jy sigma=0.001103 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175392Jy sigma=0.001103 ! Fit after self-cal, rms=0.174512Jy sigma=0.001103 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.759 mas, bmaj=16.66 mas, bpa=0.9633 degrees ! Estimated noise=653.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208584 Jy ! Component: 100 - total flux cleaned = 0.00351854 Jy ! Component: 150 - total flux cleaned = 0.00418028 Jy ! Component: 200 - total flux cleaned = 0.00436313 Jy ! Total flux subtracted in 200 components = 0.00436313 Jy ! Clean residual min=-0.002615 max=0.002829 Jy/beam ! Clean residual mean=0.000013 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.182244 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 108 components and 0.182244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174504Jy sigma=0.001103 ! Fit after self-cal, rms=0.174498Jy sigma=0.001103 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423157 Jy ! Component: 100 - total flux cleaned = 0.00077773 Jy ! Component: 150 - total flux cleaned = 0.000977974 Jy ! Component: 200 - total flux cleaned = 0.0010948 Jy ! Total flux subtracted in 200 components = 0.0010948 Jy ! Clean residual min=-0.002567 max=0.002808 Jy/beam ! Clean residual mean=0.000015 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.183339 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 108 components and 0.183339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174499Jy sigma=0.001103 ! Fit after self-cal, rms=0.174496Jy sigma=0.001102 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=4.51 mas, bpa=-31.33 degrees ! Estimated noise=528.528 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.634 x 4.51 at -31.33 degrees (North through East) ! Clean map min=-0.0023238 max=0.088988 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.805 mas, bmaj=3.472 mas, bpa=-43.04 degrees ! Estimated noise=1229.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0692895 Jy ! Component: 100 - total flux cleaned = 0.0966242 Jy ! Component: 150 - total flux cleaned = 0.1131 Jy ! Component: 200 - total flux cleaned = 0.124688 Jy ! Total flux subtracted in 200 components = 0.124688 Jy ! Clean residual min=-0.007208 max=0.007856 Jy/beam ! Clean residual mean=-0.000021 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.124688 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.124688 Jy ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=4.51 mas, bpa=-31.33 degrees ! Estimated noise=528.528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011522 Jy ! Component: 100 - total flux cleaned = 0.0198595 Jy ! Component: 150 - total flux cleaned = 0.0263769 Jy ! Component: 200 - total flux cleaned = 0.0316372 Jy ! Total flux subtracted in 200 components = 0.0316372 Jy ! Clean residual min=-0.003143 max=0.004112 Jy/beam ! Clean residual mean=-0.000012 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.156325 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 0.156325 Jy ! Inverting map ! Added new window around map position (37, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453438 Jy ! Component: 100 - total flux cleaned = 0.00816892 Jy ! Component: 150 - total flux cleaned = 0.0112396 Jy ! Component: 200 - total flux cleaned = 0.0138655 Jy ! Total flux subtracted in 200 components = 0.0138655 Jy ! Clean residual min=-0.002760 max=0.003029 Jy/beam ! Clean residual mean=-0.000003 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.170191 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 70 components and 0.170191 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.759 mas, bmaj=16.66 mas, bpa=0.9633 degrees ! Estimated noise=653.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403204 Jy ! Component: 100 - total flux cleaned = 0.00690612 Jy ! Component: 150 - total flux cleaned = 0.00909395 Jy ! Component: 200 - total flux cleaned = 0.0107744 Jy ! Total flux subtracted in 200 components = 0.0107744 Jy ! Clean residual min=-0.002796 max=0.002790 Jy/beam ! Clean residual mean=0.000007 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.180965 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013024 Jy ! Component: 100 - total flux cleaned = 0.00231688 Jy ! Component: 150 - total flux cleaned = 0.00278085 Jy ! Component: 200 - total flux cleaned = 0.00317141 Jy ! Total flux subtracted in 200 components = 0.00317141 Jy ! Clean residual min=-0.002688 max=0.002666 Jy/beam ! Clean residual mean=0.000011 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.184137 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 114 components and 0.184137 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=4.51 mas, bpa=-31.33 degrees ! Estimated noise=528.528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000909888 Jy ! Component: 100 - total flux cleaned = -0.00103425 Jy ! Component: 150 - total flux cleaned = -0.00098266 Jy ! Component: 200 - total flux cleaned = -0.000983676 Jy ! Total flux subtracted in 200 components = -0.000983676 Jy ! Clean residual min=-0.002547 max=0.002473 Jy/beam ! Clean residual mean=0.000005 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.183153 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 126 components and 0.183153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174480Jy sigma=0.001102 ! Fit after self-cal, rms=0.174450Jy sigma=0.001102 wmodel J1304-2106_S_2009_05_13_pus_map.mod ! Writing 126 model components to file: J1304-2106_S_2009_05_13_pus_map.mod wobs J1304-2106_S_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J1304-2106_S_2009_05_13_pus_uvs.fits wwins J1304-2106_S_2009_05_13_pus_map.win ! wwins: Wrote 5 windows to J1304-2106_S_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243857 Jy ! Component: 100 - total flux cleaned = 0.000331756 Jy ! Component: 150 - total flux cleaned = 0.000161086 Jy ! Component: 200 - total flux cleaned = 0.000120514 Jy ! Component: 250 - total flux cleaned = 8.08419e-05 Jy ! Component: 300 - total flux cleaned = 4.18885e-05 Jy ! Component: 350 - total flux cleaned = 3.57748e-06 Jy ! Component: 400 - total flux cleaned = 3.34756e-06 Jy ! Component: 450 - total flux cleaned = -3.31708e-05 Jy ! Component: 500 - total flux cleaned = -0.000177297 Jy ! Component: 550 - total flux cleaned = -0.000211701 Jy ! Component: 600 - total flux cleaned = -0.000141884 Jy ! Component: 650 - total flux cleaned = -7.39436e-05 Jy ! Component: 700 - total flux cleaned = -0.000142355 Jy ! Component: 750 - total flux cleaned = -4.20016e-05 Jy ! Component: 800 - total flux cleaned = 8.93614e-05 Jy ! Component: 850 - total flux cleaned = 0.000121646 Jy ! Component: 900 - total flux cleaned = 0.000185375 Jy ! Component: 950 - total flux cleaned = 0.00021732 Jy ! Component: 1000 - total flux cleaned = 0.000280123 Jy ! Component: 1050 - total flux cleaned = 0.000342228 Jy ! Component: 1100 - total flux cleaned = 0.000434499 Jy ! Component: 1150 - total flux cleaned = 0.000495121 Jy ! Component: 1200 - total flux cleaned = 0.000585515 Jy ! Component: 1250 - total flux cleaned = 0.000674229 Jy ! Component: 1300 - total flux cleaned = 0.000791063 Jy ! Component: 1350 - total flux cleaned = 0.000849057 Jy ! Component: 1400 - total flux cleaned = 0.000791461 Jy ! Component: 1450 - total flux cleaned = 0.000934171 Jy ! Component: 1500 - total flux cleaned = 0.000877674 Jy ! Component: 1550 - total flux cleaned = 0.000961919 Jy ! Component: 1600 - total flux cleaned = 0.000989888 Jy ! Component: 1650 - total flux cleaned = 0.000934485 Jy ! Component: 1700 - total flux cleaned = 0.0010442 Jy ! Component: 1750 - total flux cleaned = 0.00096275 Jy ! Component: 1800 - total flux cleaned = 0.00104395 Jy ! Component: 1850 - total flux cleaned = 0.00112384 Jy ! Component: 1900 - total flux cleaned = 0.00104394 Jy ! Component: 1950 - total flux cleaned = 0.00109672 Jy ! Component: 2000 - total flux cleaned = 0.00109675 Jy ! Component: 2050 - total flux cleaned = 0.00109697 Jy ! Component: 2100 - total flux cleaned = 0.00120007 Jy ! Component: 2150 - total flux cleaned = 0.00119973 Jy ! Component: 2200 - total flux cleaned = 0.00130141 Jy ! Component: 2250 - total flux cleaned = 0.0012001 Jy ! Component: 2300 - total flux cleaned = 0.00125024 Jy ! Component: 2350 - total flux cleaned = 0.00130011 Jy ! Component: 2400 - total flux cleaned = 0.00137436 Jy ! Component: 2450 - total flux cleaned = 0.0013742 Jy ! Component: 2500 - total flux cleaned = 0.00132515 Jy ! Component: 2550 - total flux cleaned = 0.00144636 Jy ! Component: 2600 - total flux cleaned = 0.0013739 Jy ! Component: 2650 - total flux cleaned = 0.00137369 Jy ! Component: 2700 - total flux cleaned = 0.00139758 Jy ! Component: 2750 - total flux cleaned = 0.00127941 Jy ! Component: 2800 - total flux cleaned = 0.00132641 Jy ! Component: 2850 - total flux cleaned = 0.00132659 Jy ! Component: 2900 - total flux cleaned = 0.00125714 Jy ! Component: 2950 - total flux cleaned = 0.00118794 Jy ! Component: 3000 - total flux cleaned = 0.00118801 Jy ! Component: 3050 - total flux cleaned = 0.00123368 Jy ! Component: 3100 - total flux cleaned = 0.00127917 Jy ! Component: 3150 - total flux cleaned = 0.00112115 Jy ! Component: 3200 - total flux cleaned = 0.00121091 Jy ! Component: 3250 - total flux cleaned = 0.00118851 Jy ! Component: 3300 - total flux cleaned = 0.00118856 Jy ! Component: 3350 - total flux cleaned = 0.00123252 Jy ! Component: 3400 - total flux cleaned = 0.00121071 Jy ! Component: 3450 - total flux cleaned = 0.00131994 Jy ! Component: 3500 - total flux cleaned = 0.0012766 Jy ! Component: 3550 - total flux cleaned = 0.00127672 Jy ! Component: 3600 - total flux cleaned = 0.00138425 Jy ! Component: 3650 - total flux cleaned = 0.00134153 Jy ! Component: 3700 - total flux cleaned = 0.00138388 Jy ! Component: 3750 - total flux cleaned = 0.0014052 Jy ! Component: 3800 - total flux cleaned = 0.00140524 Jy ! Component: 3850 - total flux cleaned = 0.00148916 Jy ! Component: 3900 - total flux cleaned = 0.00142652 Jy ! Component: 3950 - total flux cleaned = 0.00136398 Jy ! Component: 4000 - total flux cleaned = 0.00142598 Jy ! Component: 4050 - total flux cleaned = 0.00146723 Jy ! Total flux subtracted in 4096 components = 0.00144671 Jy ! Clean residual min=-0.001369 max=0.001240 Jy/beam ! Clean residual mean=0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.1846 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 440 components and 0.1846 Jy ![Exited script file: muppet] wmap "J1304-2106_S_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.634 x 4.51 at -31.33 degrees (North through East) ! Clean map min=-0.0019715 max=0.088743 Jy/beam ! Writing clean map to FITS file: J1304-2106_S_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0887432 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000346673 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17194 1.17194 2.34388 4.68777 9.37553 18.7511 37.5021 75.0042 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.634 x 4.51 at -31.33 degrees (North through East) ! Clean map min=-0.0019715 max=0.088743 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1304-2106_S_2009_05_13_pus_uvs.log closed on Sun Jan 22 11:36:58 2017