! Started logfile: J1113+1442_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:42:08 2017 obs J1113+1442_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J1113+1442_X_2009_05_13_pus_uva.fits ! AN table 1: 121 integrations on 120 of 120 possible baselines. ! AN table 2: 124 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.580918 visibilities/baseline/integration-bin. ! Found source: J1113+1442 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 68316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1113+1442_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 690 telescope corrections were flagged in sub-array 1. ! A total of 273 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 690 telescope corrections were flagged in sub-array 1. ! A total of 273 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 690 telescope corrections were flagged in sub-array 1. ! A total of 273 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 690 telescope corrections were flagged in sub-array 1. ! A total of 273 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.826460Jy sigma=0.007654 ! Fit after self-cal, rms=0.779537Jy sigma=0.007250 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.4924 mas, bmaj=1.131 mas, bpa=-0.9479 degrees ! Estimated noise=632.737 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174544 Jy ! Component: 100 - total flux cleaned = 0.229327 Jy ! Total flux subtracted in 100 components = 0.229327 Jy ! Clean residual min=-0.007612 max=0.024350 Jy/beam ! Clean residual mean=0.000047 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 0.229327 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.229327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150647Jy sigma=0.001212 ! Fit after self-cal, rms=0.150586Jy sigma=0.001212 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026282 Jy ! Component: 100 - total flux cleaned = 0.0390917 Jy ! Total flux subtracted in 100 components = 0.0390917 Jy ! Clean residual min=-0.004768 max=0.006947 Jy/beam ! Clean residual mean=0.000002 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.268419 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.268419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145735Jy sigma=0.001150 ! Fit after self-cal, rms=0.145689Jy sigma=0.001150 ! Inverting map ! Added new window around map position (-0.5, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783181 Jy ! Component: 100 - total flux cleaned = 0.0124235 Jy ! Total flux subtracted in 100 components = 0.0124235 Jy ! Clean residual min=-0.003902 max=0.005092 Jy/beam ! Clean residual mean=-0.000014 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.280842 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.280842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145203Jy sigma=0.001142 ! Fit after self-cal, rms=0.145165Jy sigma=0.001142 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5603 mas, bmaj=1.364 mas, bpa=-0.003888 degrees ! Estimated noise=299.747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610723 Jy ! Component: 100 - total flux cleaned = 0.00972674 Jy ! Component: 150 - total flux cleaned = 0.0121633 Jy ! Component: 200 - total flux cleaned = 0.0138709 Jy ! Total flux subtracted in 200 components = 0.0138709 Jy ! Clean residual min=-0.002782 max=0.004193 Jy/beam ! Clean residual mean=-0.000202 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.294713 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 53 components and 0.294713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144970Jy sigma=0.001138 ! Fit after self-cal, rms=0.144953Jy sigma=0.001138 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.05 HO 1.00* ! KK 1.00* KP 1.00 LA 0.98 MK 1.00* ! NL 1.17 NY 0.96 OV 0.98 PT 0.96 ! SC 1.03 TS 1.00* WZ 0.98 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 1.05 HO 1.00* ! KK 0.97 KP 1.01 LA 1.01 MK 1.00 ! NL 0.96 NY 1.01 OV 0.96 PT 0.96 ! SC 1.01 TS 1.01 WZ 1.00* KB 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.06 HO 1.00* ! KK 1.00* KP 0.95 LA 0.97 MK 1.00* ! NL 1.17 NY 0.98 OV 0.96 PT 0.99 ! SC 1.02 TS 1.00* WZ 1.00 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 1.08 HO 1.00* ! KK 0.96 KP 0.97 LA 0.98 MK 1.01 ! NL 0.95 NY 1.00 OV 0.94 PT 0.99 ! SC 1.02 TS 1.01 WZ 1.00* KB 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.06 HO 1.00* ! KK 1.00* KP 0.98 LA 0.99 MK 1.00* ! NL 1.25 NY 1.01 OV 0.99 PT 1.00 ! SC 1.05 TS 1.00* WZ 1.00 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 1.08 HO 1.00* ! KK 0.98 KP 0.98 LA 1.02 MK 0.97 ! NL 0.99 NY 1.06 OV 0.96 PT 1.01 ! SC 1.03 TS 0.99 WZ 1.00* KB 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.03 HO 1.00* ! KK 1.00* KP 0.96 LA 0.97 MK 1.00* ! NL 1.29 NY 0.98 OV 0.99 PT 0.99 ! SC 0.97 TS 1.00* WZ 1.01 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 HN 1.06 HO 1.00* ! KK 0.95 KP 0.98 LA 1.00 MK 0.99 ! NL 0.98 NY 1.03 OV 0.99 PT 1.00 ! SC 0.99 TS 0.98 WZ 1.00* KB 1.03 ! ! ! Fit before self-cal, rms=0.144953Jy sigma=0.001138 ! Fit after self-cal, rms=0.148243Jy sigma=0.001131 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5631 mas, bmaj=1.367 mas, bpa=-0.2006 degrees ! Estimated noise=299.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.1, 3.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259438 Jy ! Component: 100 - total flux cleaned = 0.00341777 Jy ! Component: 150 - total flux cleaned = 0.00390687 Jy ! Component: 200 - total flux cleaned = 0.0042216 Jy ! Total flux subtracted in 200 components = 0.0042216 Jy ! Clean residual min=-0.001610 max=0.001458 Jy/beam ! Clean residual mean=-0.000076 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.298935 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.298935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148177Jy sigma=0.001130 ! Fit after self-cal, rms=0.148251Jy sigma=0.001130 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148251Jy sigma=0.001130 ! Fit after self-cal, rms=0.148577Jy sigma=0.001129 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5634 mas, bmaj=1.368 mas, bpa=-0.2568 degrees ! Estimated noise=300.269 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000900456 Jy ! Component: 100 - total flux cleaned = 0.0012959 Jy ! Component: 150 - total flux cleaned = 0.00156419 Jy ! Component: 200 - total flux cleaned = 0.00166308 Jy ! Total flux subtracted in 200 components = 0.00166308 Jy ! Clean residual min=-0.001472 max=0.001347 Jy/beam ! Clean residual mean=-0.000060 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.300598 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 103 components and 0.300598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148560Jy sigma=0.001129 ! Fit after self-cal, rms=0.148556Jy sigma=0.001129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350848 Jy ! Component: 100 - total flux cleaned = 0.000466622 Jy ! Component: 150 - total flux cleaned = 0.000586625 Jy ! Component: 200 - total flux cleaned = 0.000657412 Jy ! Total flux subtracted in 200 components = 0.000657412 Jy ! Clean residual min=-0.001435 max=0.001261 Jy/beam ! Clean residual mean=-0.000066 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.301255 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 121 components and 0.301255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148550Jy sigma=0.001129 ! Fit after self-cal, rms=0.148548Jy sigma=0.001129 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148548Jy sigma=0.001129 ! Fit after self-cal, rms=0.148621Jy sigma=0.001129 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.564 mas, bmaj=1.368 mas, bpa=-0.2954 degrees ! Estimated noise=300.565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474582 Jy ! Component: 100 - total flux cleaned = 0.000536431 Jy ! Component: 150 - total flux cleaned = 0.000624497 Jy ! Component: 200 - total flux cleaned = 0.00070189 Jy ! Total flux subtracted in 200 components = 0.00070189 Jy ! Clean residual min=-0.001362 max=0.001294 Jy/beam ! Clean residual mean=-0.000036 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.301957 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 131 components and 0.301957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148616Jy sigma=0.001129 ! Fit after self-cal, rms=0.148614Jy sigma=0.001129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144936 Jy ! Component: 100 - total flux cleaned = 0.000267435 Jy ! Component: 150 - total flux cleaned = 0.000320191 Jy ! Component: 200 - total flux cleaned = 0.000356223 Jy ! Total flux subtracted in 200 components = 0.000356223 Jy ! Clean residual min=-0.001346 max=0.001259 Jy/beam ! Clean residual mean=-0.000040 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.302313 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 141 components and 0.302313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148610Jy sigma=0.001129 ! Fit after self-cal, rms=0.148610Jy sigma=0.001129 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148610Jy sigma=0.001129 ! Fit after self-cal, rms=0.148690Jy sigma=0.001129 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.281 mas, bmaj=2.804 mas, bpa=3.744 degrees ! Estimated noise=445.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000700477 Jy ! Component: 100 - total flux cleaned = 0.000794077 Jy ! Component: 150 - total flux cleaned = 0.000833368 Jy ! Component: 200 - total flux cleaned = 0.000844012 Jy ! Total flux subtracted in 200 components = 0.000844012 Jy ! Clean residual min=-0.001812 max=0.001985 Jy/beam ! Clean residual mean=-0.000083 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.303157 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 157 components and 0.303157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148690Jy sigma=0.001129 ! Fit after self-cal, rms=0.148689Jy sigma=0.001129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125172 Jy ! Component: 100 - total flux cleaned = 0.000156082 Jy ! Component: 150 - total flux cleaned = 0.000164202 Jy ! Component: 200 - total flux cleaned = 0.000164183 Jy ! Total flux subtracted in 200 components = 0.000164183 Jy ! Clean residual min=-0.001803 max=0.001915 Jy/beam ! Clean residual mean=-0.000088 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.303322 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 165 components and 0.303322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148688Jy sigma=0.001129 ! Fit after self-cal, rms=0.148688Jy sigma=0.001129 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.5643 mas, bmaj=1.369 mas, bpa=-0.3186 degrees ! Estimated noise=300.852 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5643 x 1.369 at -0.3186 degrees (North through East) ! Clean map min=-0.0012989 max=0.22938 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.495 mas, bmaj=1.134 mas, bpa=-1.313 degrees ! Estimated noise=636.723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175077 Jy ! Component: 100 - total flux cleaned = 0.229455 Jy ! Component: 150 - total flux cleaned = 0.255142 Jy ! Component: 200 - total flux cleaned = 0.268841 Jy ! Total flux subtracted in 200 components = 0.268841 Jy ! Clean residual min=-0.003467 max=0.006861 Jy/beam ! Clean residual mean=0.000037 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.268841 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.268841 Jy ! Inverting map and beam ! Estimated beam: bmin=0.5643 mas, bmaj=1.369 mas, bpa=-0.3186 degrees ! Estimated noise=300.852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114892 Jy ! Component: 100 - total flux cleaned = 0.0180783 Jy ! Component: 150 - total flux cleaned = 0.0224282 Jy ! Component: 200 - total flux cleaned = 0.0255152 Jy ! Total flux subtracted in 200 components = 0.0255152 Jy ! Clean residual min=-0.001443 max=0.001758 Jy/beam ! Clean residual mean=0.000050 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.294356 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 65 components and 0.294356 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225235 Jy ! Component: 100 - total flux cleaned = 0.00394283 Jy ! Component: 150 - total flux cleaned = 0.00522571 Jy ! Component: 200 - total flux cleaned = 0.00621331 Jy ! Total flux subtracted in 200 components = 0.00621331 Jy ! Clean residual min=-0.001300 max=0.001330 Jy/beam ! Clean residual mean=-0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.30057 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 93 components and 0.30057 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.281 mas, bmaj=2.804 mas, bpa=3.744 degrees ! Estimated noise=445.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001603 Jy ! Component: 100 - total flux cleaned = 0.00232943 Jy ! Component: 150 - total flux cleaned = 0.0027139 Jy ! Component: 200 - total flux cleaned = 0.00284657 Jy ! Total flux subtracted in 200 components = 0.00284657 Jy ! Clean residual min=-0.001796 max=0.001881 Jy/beam ! Clean residual mean=-0.000092 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.303416 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.7013e-05 Jy ! Component: 100 - total flux cleaned = 4.99332e-05 Jy ! Component: 150 - total flux cleaned = 6.1922e-05 Jy ! Component: 200 - total flux cleaned = 6.74246e-05 Jy ! Total flux subtracted in 200 components = 6.74246e-05 Jy ! Clean residual min=-0.001798 max=0.001858 Jy/beam ! Clean residual mean=-0.000093 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.303484 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 135 components and 0.303484 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.5643 mas, bmaj=1.369 mas, bpa=-0.3186 degrees ! Estimated noise=300.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127028 Jy ! Component: 100 - total flux cleaned = -0.000147563 Jy ! Component: 150 - total flux cleaned = -0.000111851 Jy ! Component: 200 - total flux cleaned = -8.03714e-05 Jy ! Total flux subtracted in 200 components = -8.03714e-05 Jy ! Clean residual min=-0.001324 max=0.001298 Jy/beam ! Clean residual mean=-0.000027 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.303403 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 154 components and 0.303403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148697Jy sigma=0.001129 ! Fit after self-cal, rms=0.148698Jy sigma=0.001129 wmodel J1113+1442_X_2009_05_13_pus_map.mod ! Writing 154 model components to file: J1113+1442_X_2009_05_13_pus_map.mod wobs J1113+1442_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J1113+1442_X_2009_05_13_pus_uvs.fits wwins J1113+1442_X_2009_05_13_pus_map.win ! wwins: Wrote 3 windows to J1113+1442_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000321295 Jy ! Component: 100 - total flux cleaned = -0.000598161 Jy ! Component: 150 - total flux cleaned = -0.000886393 Jy ! Component: 200 - total flux cleaned = -0.00114285 Jy ! Component: 250 - total flux cleaned = -0.00126732 Jy ! Component: 300 - total flux cleaned = -0.00138886 Jy ! Component: 350 - total flux cleaned = -0.00150734 Jy ! Component: 400 - total flux cleaned = -0.00154595 Jy ! Component: 450 - total flux cleaned = -0.00165981 Jy ! Component: 500 - total flux cleaned = -0.00175317 Jy ! Component: 550 - total flux cleaned = -0.00186333 Jy ! Component: 600 - total flux cleaned = -0.00197166 Jy ! Component: 650 - total flux cleaned = -0.00206046 Jy ! Component: 700 - total flux cleaned = -0.00213037 Jy ! Component: 750 - total flux cleaned = -0.00219955 Jy ! Component: 800 - total flux cleaned = -0.00221675 Jy ! Component: 850 - total flux cleaned = -0.0023185 Jy ! Component: 900 - total flux cleaned = -0.00240214 Jy ! Component: 950 - total flux cleaned = -0.00248491 Jy ! Component: 1000 - total flux cleaned = -0.00253412 Jy ! Component: 1050 - total flux cleaned = -0.00259914 Jy ! Component: 1100 - total flux cleaned = -0.00267962 Jy ! Component: 1150 - total flux cleaned = -0.00272747 Jy ! Component: 1200 - total flux cleaned = -0.00282235 Jy ! Component: 1250 - total flux cleaned = -0.00285365 Jy ! Component: 1300 - total flux cleaned = -0.00291584 Jy ! Component: 1350 - total flux cleaned = -0.00297742 Jy ! Component: 1400 - total flux cleaned = -0.00300811 Jy ! Component: 1450 - total flux cleaned = -0.00303834 Jy ! Component: 1500 - total flux cleaned = -0.00308353 Jy ! Component: 1550 - total flux cleaned = -0.00312837 Jy ! Component: 1600 - total flux cleaned = -0.00315807 Jy ! Component: 1650 - total flux cleaned = -0.00320221 Jy ! Component: 1700 - total flux cleaned = -0.00326058 Jy ! Component: 1750 - total flux cleaned = -0.00327483 Jy ! Component: 1800 - total flux cleaned = -0.0032892 Jy ! Component: 1850 - total flux cleaned = -0.00330355 Jy ! Component: 1900 - total flux cleaned = -0.00333192 Jy ! Component: 1950 - total flux cleaned = -0.00336011 Jy ! Component: 2000 - total flux cleaned = -0.00336006 Jy ! Component: 2050 - total flux cleaned = -0.00338794 Jy ! Component: 2100 - total flux cleaned = -0.00340171 Jy ! Component: 2150 - total flux cleaned = -0.00341546 Jy ! Component: 2200 - total flux cleaned = -0.00342915 Jy ! Component: 2250 - total flux cleaned = -0.00346991 Jy ! Component: 2300 - total flux cleaned = -0.00345646 Jy ! Component: 2350 - total flux cleaned = -0.00348334 Jy ! Component: 2400 - total flux cleaned = -0.00351006 Jy ! Component: 2450 - total flux cleaned = -0.00352334 Jy ! Component: 2500 - total flux cleaned = -0.00354969 Jy ! Component: 2550 - total flux cleaned = -0.00357596 Jy ! Component: 2600 - total flux cleaned = -0.00357595 Jy ! Component: 2650 - total flux cleaned = -0.00358894 Jy ! Component: 2700 - total flux cleaned = -0.00362764 Jy ! Component: 2750 - total flux cleaned = -0.00362763 Jy ! Component: 2800 - total flux cleaned = -0.00365314 Jy ! Component: 2850 - total flux cleaned = -0.00367856 Jy ! Component: 2900 - total flux cleaned = -0.00369111 Jy ! Component: 2950 - total flux cleaned = -0.00367854 Jy ! Component: 3000 - total flux cleaned = -0.003691 Jy ! Component: 3050 - total flux cleaned = -0.00371585 Jy ! Component: 3100 - total flux cleaned = -0.00371578 Jy ! Component: 3150 - total flux cleaned = -0.00372807 Jy ! Component: 3200 - total flux cleaned = -0.00374032 Jy ! Component: 3250 - total flux cleaned = -0.00376469 Jy ! Component: 3300 - total flux cleaned = -0.00375248 Jy ! Component: 3350 - total flux cleaned = -0.00377663 Jy ! Component: 3400 - total flux cleaned = -0.00376462 Jy ! Component: 3450 - total flux cleaned = -0.00380061 Jy ! Component: 3500 - total flux cleaned = -0.00383635 Jy ! Component: 3550 - total flux cleaned = -0.00382439 Jy ! Component: 3600 - total flux cleaned = -0.00381256 Jy ! Component: 3650 - total flux cleaned = -0.00381253 Jy ! Component: 3700 - total flux cleaned = -0.0038477 Jy ! Component: 3750 - total flux cleaned = -0.00382439 Jy ! Component: 3800 - total flux cleaned = -0.00382443 Jy ! Component: 3850 - total flux cleaned = -0.00384759 Jy ! Component: 3900 - total flux cleaned = -0.00387063 Jy ! Component: 3950 - total flux cleaned = -0.00387065 Jy ! Component: 4000 - total flux cleaned = -0.00387062 Jy ! Component: 4050 - total flux cleaned = -0.00390474 Jy ! Total flux subtracted in 4096 components = -0.00388206 Jy ! Clean residual min=-0.000629 max=0.000758 Jy/beam ! Clean residual mean=0.000009 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.299521 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 468 components and 0.299521 Jy ![Exited script file: muppet] wmap "J1113+1442_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5643 x 1.369 at -0.3186 degrees (North through East) ! Clean map min=-0.0011242 max=0.22953 Jy/beam ! Writing clean map to FITS file: J1113+1442_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.22953 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210478 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.275098 0.275098 0.550197 1.10039 2.20079 4.40157 8.80315 17.6063 35.2126 70.4252 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.229 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5643 x 1.369 at -0.3186 degrees (North through East) ! Clean map min=-0.0011242 max=0.22953 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1113+1442_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:42:17 2017