! Started logfile: J1113+1442_S_2009_05_13_pus_uvs.log on Sun Jan 22 11:36:03 2017 obs J1113+1442_S_2009_05_13_pus_uva.fits ! Reading UV FITS file: J1113+1442_S_2009_05_13_pus_uva.fits ! AN table 1: 121 integrations on 120 of 120 possible baselines. ! AN table 2: 124 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.580918 visibilities/baseline/integration-bin. ! Found source: J1113+1442 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1341 lines of history. ! ! Reading 68316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1113+1442_S_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 690 telescope corrections were flagged in sub-array 1. ! A total of 273 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 690 telescope corrections were flagged in sub-array 1. ! A total of 273 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 690 telescope corrections were flagged in sub-array 1. ! A total of 273 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 690 telescope corrections were flagged in sub-array 1. ! A total of 273 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.757704Jy sigma=0.006322 ! Fit after self-cal, rms=0.720568Jy sigma=0.006022 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.907 mas, bmaj=4.307 mas, bpa=-2.395 degrees ! Estimated noise=719.424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224637 Jy ! Component: 100 - total flux cleaned = 0.291151 Jy ! Total flux subtracted in 100 components = 0.291151 Jy ! Clean residual min=-0.007560 max=0.029658 Jy/beam ! Clean residual mean=-0.000034 rms=0.002132 Jy/beam ! Combined flux in latest and established models = 0.291151 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.291151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170280Jy sigma=0.001242 ! Fit after self-cal, rms=0.170210Jy sigma=0.001241 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320234 Jy ! Component: 100 - total flux cleaned = 0.0479278 Jy ! Total flux subtracted in 100 components = 0.0479278 Jy ! Clean residual min=-0.006387 max=0.009209 Jy/beam ! Clean residual mean=-0.000081 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.339079 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 13 components and 0.339079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163858Jy sigma=0.001168 ! Fit after self-cal, rms=0.163832Jy sigma=0.001168 ! Inverting map ! Added new window around map position (-1, 5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00993415 Jy ! Component: 100 - total flux cleaned = 0.0163127 Jy ! Total flux subtracted in 100 components = 0.0163127 Jy ! Clean residual min=-0.006145 max=0.008316 Jy/beam ! Clean residual mean=-0.000097 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.355392 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.355392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163147Jy sigma=0.001159 ! Fit after self-cal, rms=0.163139Jy sigma=0.001159 ! Inverting map ! Added new window around map position (6.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00728035 Jy ! Component: 100 - total flux cleaned = 0.0101084 Jy ! Total flux subtracted in 100 components = 0.0101084 Jy ! Clean residual min=-0.005482 max=0.005911 Jy/beam ! Clean residual mean=-0.000106 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.3655 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.3655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162901Jy sigma=0.001157 ! Fit after self-cal, rms=0.162892Jy sigma=0.001157 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.179 mas, bmaj=5.218 mas, bpa=-0.5637 degrees ! Estimated noise=331.728 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298248 Jy ! Component: 100 - total flux cleaned = 0.00361364 Jy ! Component: 150 - total flux cleaned = 0.00379263 Jy ! Component: 200 - total flux cleaned = 0.00386889 Jy ! Total flux subtracted in 200 components = 0.00386889 Jy ! Clean residual min=-0.005021 max=0.003805 Jy/beam ! Clean residual mean=-0.000962 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.369369 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.369369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162789Jy sigma=0.001155 ! Fit after self-cal, rms=0.162792Jy sigma=0.001155 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.98 HO 1.00* ! KK 1.00* KP 0.97 LA 0.93 MK 1.00* ! NL 1.17 NY 1.02 OV 0.99 PT 0.99 ! SC 0.93 TS 1.00* WZ 0.97 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 0.99 HO 1.00* ! KK 0.99 KP 1.05 LA 0.94 MK 1.00 ! NL 0.97 NY 1.02 OV 0.99 PT 0.98 ! SC 0.94 TS 1.36 WZ 1.00* KB 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.97 HO 1.00* ! KK 1.00* KP 1.02 LA 0.97 MK 1.00* ! NL 1.11 NY 0.99 OV 1.00 PT 1.00 ! SC 0.97 TS 1.00* WZ 0.96 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.95 HN 0.98 HO 1.00* ! KK 1.01 KP 1.01 LA 0.97 MK 0.99 ! NL 1.00 NY 1.01 OV 0.98 PT 0.98 ! SC 0.98 TS 1.08 WZ 1.00* KB 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.99 HO 1.00* ! KK 1.00* KP 1.01 LA 0.97 MK 1.00* ! NL 1.13 NY 1.00 OV 1.06 PT 0.99 ! SC 0.97 TS 1.00* WZ 1.02 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.94 HN 0.97 HO 1.00* ! KK 0.98 KP 1.02 LA 0.98 MK 1.02 ! NL 0.97 NY 1.03 OV 1.05 PT 0.99 ! SC 0.98 TS 1.25 WZ 1.00* KB 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.94 HO 1.00* ! KK 1.00* KP 0.99 LA 0.99 MK 1.00* ! NL 1.06 NY 1.00 OV 0.99 PT 1.00 ! SC 0.95 TS 1.00* WZ 1.02 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.93 HO 1.00* ! KK 1.02 KP 0.99 LA 0.98 MK 1.01 ! NL 1.00 NY 1.04 OV 0.98 PT 0.99 ! SC 0.94 TS 1.18 WZ 1.00* KB 0.99 ! ! ! Fit before self-cal, rms=0.162792Jy sigma=0.001155 ! Fit after self-cal, rms=0.162540Jy sigma=0.001140 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.215 mas, bmaj=5.222 mas, bpa=-1.054 degrees ! Estimated noise=333.904 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00224703 Jy ! Component: 100 - total flux cleaned = -0.00294826 Jy ! Component: 150 - total flux cleaned = -0.0031859 Jy ! Component: 200 - total flux cleaned = -0.00311757 Jy ! Total flux subtracted in 200 components = -0.00311757 Jy ! Clean residual min=-0.002314 max=0.002241 Jy/beam ! Clean residual mean=-0.000306 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.366252 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.366252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162430Jy sigma=0.001139 ! Fit after self-cal, rms=0.162449Jy sigma=0.001139 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162449Jy sigma=0.001139 ! Fit after self-cal, rms=0.162588Jy sigma=0.001139 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.221 mas, bmaj=5.228 mas, bpa=-1.178 degrees ! Estimated noise=333.715 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155823 Jy ! Component: 100 - total flux cleaned = -0.00176908 Jy ! Component: 150 - total flux cleaned = -0.00182977 Jy ! Component: 200 - total flux cleaned = -0.00183301 Jy ! Total flux subtracted in 200 components = -0.00183301 Jy ! Clean residual min=-0.002003 max=0.001938 Jy/beam ! Clean residual mean=-0.000235 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.364419 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.364419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162534Jy sigma=0.001138 ! Fit after self-cal, rms=0.162537Jy sigma=0.001138 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151191 Jy ! Component: 100 - total flux cleaned = 0.00166551 Jy ! Component: 150 - total flux cleaned = 0.00162152 Jy ! Component: 200 - total flux cleaned = 0.00154352 Jy ! Total flux subtracted in 200 components = 0.00154352 Jy ! Clean residual min=-0.001988 max=0.001669 Jy/beam ! Clean residual mean=-0.000247 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.365962 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 89 components and 0.365962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162507Jy sigma=0.001138 ! Fit after self-cal, rms=0.162504Jy sigma=0.001138 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162504Jy sigma=0.001138 ! Fit after self-cal, rms=0.162582Jy sigma=0.001138 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.227 mas, bmaj=5.23 mas, bpa=-1.289 degrees ! Estimated noise=333.602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109954 Jy ! Component: 100 - total flux cleaned = -0.00101229 Jy ! Component: 150 - total flux cleaned = -0.000857319 Jy ! Component: 200 - total flux cleaned = -0.00075343 Jy ! Total flux subtracted in 200 components = -0.00075343 Jy ! Clean residual min=-0.001825 max=0.001651 Jy/beam ! Clean residual mean=-0.000181 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.365209 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 101 components and 0.365209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162556Jy sigma=0.001137 ! Fit after self-cal, rms=0.162558Jy sigma=0.001137 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156615 Jy ! Component: 100 - total flux cleaned = 0.000249317 Jy ! Component: 150 - total flux cleaned = 0.000249142 Jy ! Component: 200 - total flux cleaned = 0.000249388 Jy ! Total flux subtracted in 200 components = 0.000249388 Jy ! Clean residual min=-0.001790 max=0.001585 Jy/beam ! Clean residual mean=-0.000184 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.365458 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 109 components and 0.365458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162547Jy sigma=0.001137 ! Fit after self-cal, rms=0.162546Jy sigma=0.001137 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162546Jy sigma=0.001137 ! Fit after self-cal, rms=0.162588Jy sigma=0.001137 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.727 mas, bmaj=9.863 mas, bpa=3.98 degrees ! Estimated noise=461.937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519115 Jy ! Component: 100 - total flux cleaned = 0.000575278 Jy ! Component: 150 - total flux cleaned = 0.000597793 Jy ! Component: 200 - total flux cleaned = 0.000616386 Jy ! Total flux subtracted in 200 components = 0.000616386 Jy ! Clean residual min=-0.002429 max=0.001500 Jy/beam ! Clean residual mean=-0.000452 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.366075 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 0.366075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162584Jy sigma=0.001137 ! Fit after self-cal, rms=0.162586Jy sigma=0.001137 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124596 Jy ! Component: 100 - total flux cleaned = 0.000139094 Jy ! Component: 150 - total flux cleaned = 0.000139734 Jy ! Component: 200 - total flux cleaned = 0.000140269 Jy ! Total flux subtracted in 200 components = 0.000140269 Jy ! Clean residual min=-0.002434 max=0.001487 Jy/beam ! Clean residual mean=-0.000456 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.366215 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 131 components and 0.366215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162585Jy sigma=0.001137 ! Fit after self-cal, rms=0.162585Jy sigma=0.001137 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=5.231 mas, bpa=-1.361 degrees ! Estimated noise=333.491 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.231 x 5.231 at -1.361 degrees (North through East) ! Clean map min=-0.0020215 max=0.29674 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.94 mas, bmaj=4.306 mas, bpa=-3.289 degrees ! Estimated noise=726.399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.226441 Jy ! Component: 100 - total flux cleaned = 0.290115 Jy ! Component: 150 - total flux cleaned = 0.319409 Jy ! Component: 200 - total flux cleaned = 0.334118 Jy ! Total flux subtracted in 200 components = 0.334118 Jy ! Clean residual min=-0.003826 max=0.007237 Jy/beam ! Clean residual mean=0.000008 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.334118 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.334118 Jy ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=5.231 mas, bpa=-1.361 degrees ! Estimated noise=333.491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117592 Jy ! Component: 100 - total flux cleaned = 0.0182974 Jy ! Component: 150 - total flux cleaned = 0.0224094 Jy ! Component: 200 - total flux cleaned = 0.0252948 Jy ! Total flux subtracted in 200 components = 0.0252948 Jy ! Clean residual min=-0.002166 max=0.001868 Jy/beam ! Clean residual mean=-0.000104 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.359413 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 0.359413 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.727 mas, bmaj=9.863 mas, bpa=3.98 degrees ! Estimated noise=461.937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354488 Jy ! Component: 100 - total flux cleaned = 0.00511946 Jy ! Component: 150 - total flux cleaned = 0.00571614 Jy ! Component: 200 - total flux cleaned = 0.00617936 Jy ! Total flux subtracted in 200 components = 0.00617936 Jy ! Clean residual min=-0.002498 max=0.001418 Jy/beam ! Clean residual mean=-0.000443 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.365592 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303788 Jy ! Component: 100 - total flux cleaned = 0.000491516 Jy ! Component: 150 - total flux cleaned = 0.000609444 Jy ! Component: 200 - total flux cleaned = 0.000652901 Jy ! Total flux subtracted in 200 components = 0.000652901 Jy ! Clean residual min=-0.002438 max=0.001452 Jy/beam ! Clean residual mean=-0.000456 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.366245 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 95 components and 0.366245 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=5.231 mas, bpa=-1.361 degrees ! Estimated noise=333.491 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485001 Jy ! Component: 100 - total flux cleaned = 0.000430922 Jy ! Component: 150 - total flux cleaned = 0.000474627 Jy ! Component: 200 - total flux cleaned = 0.00047494 Jy ! Total flux subtracted in 200 components = 0.00047494 Jy ! Clean residual min=-0.001850 max=0.001600 Jy/beam ! Clean residual mean=-0.000151 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.36672 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.36672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162632Jy sigma=0.001137 ! Fit after self-cal, rms=0.162619Jy sigma=0.001137 wmodel J1113+1442_S_2009_05_13_pus_map.mod ! Writing 105 model components to file: J1113+1442_S_2009_05_13_pus_map.mod wobs J1113+1442_S_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J1113+1442_S_2009_05_13_pus_uvs.fits wwins J1113+1442_S_2009_05_13_pus_map.win ! wwins: Wrote 4 windows to J1113+1442_S_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000802188 Jy ! Component: 100 - total flux cleaned = -0.00135818 Jy ! Component: 150 - total flux cleaned = -0.00189149 Jy ! Component: 200 - total flux cleaned = -0.0023794 Jy ! Component: 250 - total flux cleaned = -0.00282543 Jy ! Component: 300 - total flux cleaned = -0.0032885 Jy ! Component: 350 - total flux cleaned = -0.00379496 Jy ! Component: 400 - total flux cleaned = -0.00423936 Jy ! Component: 450 - total flux cleaned = -0.00465083 Jy ! Component: 500 - total flux cleaned = -0.00505604 Jy ! Component: 550 - total flux cleaned = -0.00545535 Jy ! Component: 600 - total flux cleaned = -0.00580061 Jy ! Component: 650 - total flux cleaned = -0.00619034 Jy ! Component: 700 - total flux cleaned = -0.00657568 Jy ! Component: 750 - total flux cleaned = -0.00690908 Jy ! Component: 800 - total flux cleaned = -0.00723901 Jy ! Component: 850 - total flux cleaned = -0.00751903 Jy ! Component: 900 - total flux cleaned = -0.0078193 Jy ! Component: 950 - total flux cleaned = -0.00809366 Jy ! Component: 1000 - total flux cleaned = -0.0083878 Jy ! Component: 1050 - total flux cleaned = -0.00863445 Jy ! Component: 1100 - total flux cleaned = -0.00890134 Jy ! Component: 1150 - total flux cleaned = -0.00909959 Jy ! Component: 1200 - total flux cleaned = -0.00933989 Jy ! Component: 1250 - total flux cleaned = -0.00955663 Jy ! Component: 1300 - total flux cleaned = -0.00981428 Jy ! Component: 1350 - total flux cleaned = -0.0100273 Jy ! Component: 1400 - total flux cleaned = -0.0102387 Jy ! Component: 1450 - total flux cleaned = -0.0104692 Jy ! Component: 1500 - total flux cleaned = -0.0107187 Jy ! Component: 1550 - total flux cleaned = -0.0109663 Jy ! Component: 1600 - total flux cleaned = -0.0111303 Jy ! Component: 1650 - total flux cleaned = -0.0113543 Jy ! Component: 1700 - total flux cleaned = -0.0115565 Jy ! Component: 1750 - total flux cleaned = -0.0117573 Jy ! Component: 1800 - total flux cleaned = -0.0119567 Jy ! Component: 1850 - total flux cleaned = -0.0121548 Jy ! Component: 1900 - total flux cleaned = -0.0123322 Jy ! Component: 1950 - total flux cleaned = -0.0125084 Jy ! Component: 2000 - total flux cleaned = -0.0127419 Jy ! Component: 2050 - total flux cleaned = -0.0128771 Jy ! Component: 2100 - total flux cleaned = -0.0131078 Jy ! Component: 2150 - total flux cleaned = -0.0132797 Jy ! Component: 2200 - total flux cleaned = -0.0134126 Jy ! Component: 2250 - total flux cleaned = -0.0135825 Jy ! Component: 2300 - total flux cleaned = -0.013714 Jy ! Component: 2350 - total flux cleaned = -0.0139008 Jy ! Component: 2400 - total flux cleaned = -0.0140309 Jy ! Component: 2450 - total flux cleaned = -0.0141602 Jy ! Component: 2500 - total flux cleaned = -0.0142888 Jy ! Component: 2550 - total flux cleaned = -0.0143803 Jy ! Component: 2600 - total flux cleaned = -0.0145804 Jy ! Component: 2650 - total flux cleaned = -0.0147071 Jy ! Component: 2700 - total flux cleaned = -0.0148331 Jy ! Component: 2750 - total flux cleaned = -0.0149227 Jy ! Component: 2800 - total flux cleaned = -0.0150652 Jy ! Component: 2850 - total flux cleaned = -0.0151715 Jy ! Component: 2900 - total flux cleaned = -0.0152597 Jy ! Component: 2950 - total flux cleaned = -0.0153826 Jy ! Component: 3000 - total flux cleaned = -0.0155049 Jy ! Component: 3050 - total flux cleaned = -0.0156091 Jy ! Component: 3100 - total flux cleaned = -0.0156956 Jy ! Component: 3150 - total flux cleaned = -0.0157991 Jy ! Component: 3200 - total flux cleaned = -0.0158678 Jy ! Component: 3250 - total flux cleaned = -0.0159873 Jy ! Component: 3300 - total flux cleaned = -0.0160893 Jy ! Component: 3350 - total flux cleaned = -0.0162247 Jy ! Component: 3400 - total flux cleaned = -0.0163089 Jy ! Component: 3450 - total flux cleaned = -0.0163759 Jy ! Component: 3500 - total flux cleaned = -0.0164761 Jy ! Component: 3550 - total flux cleaned = -0.0165426 Jy ! Component: 3600 - total flux cleaned = -0.0166585 Jy ! Component: 3650 - total flux cleaned = -0.0167409 Jy ! Component: 3700 - total flux cleaned = -0.0168559 Jy ! Component: 3750 - total flux cleaned = -0.0169212 Jy ! Component: 3800 - total flux cleaned = -0.0170189 Jy ! Component: 3850 - total flux cleaned = -0.0170512 Jy ! Component: 3900 - total flux cleaned = -0.0171643 Jy ! Component: 3950 - total flux cleaned = -0.0172448 Jy ! Component: 4000 - total flux cleaned = -0.017325 Jy ! Component: 4050 - total flux cleaned = -0.0173889 Jy ! Total flux subtracted in 4096 components = -0.0174844 Jy ! Clean residual min=-0.000984 max=0.000973 Jy/beam ! Clean residual mean=-0.000058 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.349236 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 398 components and 0.349235 Jy ![Exited script file: muppet] wmap "J1113+1442_S_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.231 x 5.231 at -1.361 degrees (North through East) ! Clean map min=-0.001466 max=0.29766 Jy/beam ! Writing clean map to FITS file: J1113+1442_S_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.297662 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00027343 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.275578 0.275578 0.551156 1.10231 2.20462 4.40925 8.81849 17.637 35.274 70.5479 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.297 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.231 x 5.231 at -1.361 degrees (North through East) ! Clean map min=-0.001466 max=0.29766 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1113+1442_S_2009_05_13_pus_uvs.log closed on Sun Jan 22 11:36:11 2017