! Started logfile: J0948+4039_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:41:33 2017 obs J0948+4039_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0948+4039_X_2009_05_13_pus_uva.fits ! AN table 1: 56 integrations on 120 of 120 possible baselines. ! AN table 2: 70 integrations on 120 of 120 possible baselines. ! AN table 3: 50 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.124763 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0948+4039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 10540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0948+4039_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 532 telescope corrections were flagged in sub-array 1. ! A total of 895 telescope corrections were flagged in sub-array 2. ! A total of 563 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 532 telescope corrections were flagged in sub-array 1. ! A total of 895 telescope corrections were flagged in sub-array 2. ! A total of 563 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 532 telescope corrections were flagged in sub-array 1. ! A total of 895 telescope corrections were flagged in sub-array 2. ! A total of 563 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 532 telescope corrections were flagged in sub-array 1. ! A total of 895 telescope corrections were flagged in sub-array 2. ! A total of 563 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.398037Jy sigma=0.003428 ! Fit after self-cal, rms=0.341371Jy sigma=0.003026 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5264 mas, bmaj=0.8538 mas, bpa=-11.18 degrees ! Estimated noise=1248.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.658109 Jy ! Component: 100 - total flux cleaned = 0.846494 Jy ! Total flux subtracted in 100 components = 0.846494 Jy ! Clean residual min=-0.025671 max=0.095418 Jy/beam ! Clean residual mean=0.000488 rms=0.007937 Jy/beam ! Combined flux in latest and established models = 0.846494 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.846494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309252Jy sigma=0.002965 ! Fit after self-cal, rms=0.308754Jy sigma=0.002963 ! Inverting map ! Added new window around map position (2.2, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104573 Jy ! Component: 100 - total flux cleaned = 0.173676 Jy ! Total flux subtracted in 100 components = 0.173676 Jy ! Clean residual min=-0.020754 max=0.039346 Jy/beam ! Clean residual mean=0.000425 rms=0.005605 Jy/beam ! Combined flux in latest and established models = 1.02017 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 26 components and 1.02017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255109Jy sigma=0.002375 ! Fit after self-cal, rms=0.252712Jy sigma=0.002364 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560004 Jy ! Component: 100 - total flux cleaned = 0.0978524 Jy ! Total flux subtracted in 100 components = 0.0978524 Jy ! Clean residual min=-0.017103 max=0.027789 Jy/beam ! Clean residual mean=0.000388 rms=0.004481 Jy/beam ! Combined flux in latest and established models = 1.11802 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 1.11802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231561Jy sigma=0.002097 ! Fit after self-cal, rms=0.230383Jy sigma=0.002092 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351719 Jy ! Component: 100 - total flux cleaned = 0.0621729 Jy ! Total flux subtracted in 100 components = 0.0621729 Jy ! Clean residual min=-0.015395 max=0.026218 Jy/beam ! Clean residual mean=0.000364 rms=0.003918 Jy/beam ! Combined flux in latest and established models = 1.18019 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 1.18019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220893Jy sigma=0.001954 ! Fit after self-cal, rms=0.220399Jy sigma=0.001951 ! Inverting map ! Added new window around map position (1.2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270576 Jy ! Component: 100 - total flux cleaned = 0.0476209 Jy ! Total flux subtracted in 100 components = 0.0476209 Jy ! Clean residual min=-0.014010 max=0.019200 Jy/beam ! Clean residual mean=0.000347 rms=0.003541 Jy/beam ! Combined flux in latest and established models = 1.22782 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 62 components and 1.22782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214944Jy sigma=0.001859 ! Fit after self-cal, rms=0.214618Jy sigma=0.001857 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6177 mas, bmaj=1.009 mas, bpa=-6.653 degrees ! Estimated noise=853.125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429817 Jy ! Component: 100 - total flux cleaned = 0.0726687 Jy ! Component: 150 - total flux cleaned = 0.0947407 Jy ! Component: 200 - total flux cleaned = 0.111443 Jy ! Total flux subtracted in 200 components = 0.111443 Jy ! Clean residual min=-0.007718 max=0.022180 Jy/beam ! Clean residual mean=0.008230 rms=0.003971 Jy/beam ! Combined flux in latest and established models = 1.33926 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 105 components and 1.33926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208858Jy sigma=0.001712 ! Fit after self-cal, rms=0.208240Jy sigma=0.001707 ! Inverting map ! Added new window around map position (4.8, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222272 Jy ! Component: 100 - total flux cleaned = 0.0376613 Jy ! Component: 150 - total flux cleaned = 0.0499947 Jy ! Component: 200 - total flux cleaned = 0.0602257 Jy ! Total flux subtracted in 200 components = 0.0602257 Jy ! Clean residual min=-0.009533 max=0.020027 Jy/beam ! Clean residual mean=0.006540 rms=0.003749 Jy/beam ! Combined flux in latest and established models = 1.39948 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 136 components and 1.39948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206471Jy sigma=0.001662 ! Fit after self-cal, rms=0.206307Jy sigma=0.001661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.12 HO 1.00* ! KK 1.00 KP 1.00 LA 1.00 MK 0.99 ! NL 0.99 NY 0.98 OV 0.94 PT 0.98 ! SC 1.01 TS 0.84 WZ 1.02 KB 0.83 ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00* HN 1.01 HO 1.00* ! KK 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 0.94 NY 1.04 OV 1.01 PT 1.00* ! SC 0.98 TS 1.03 WZ 1.06 KB 0.75 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.97 HN 1.00 HO 1.00* ! KK 1.08 KP 1.02 LA 0.98 MK 1.05 ! NL 1.01 NY 1.00 OV 0.96 PT 0.98 ! SC 1.01 TS 0.88 WZ 1.00 KB 0.86 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.12 HO 1.00* ! KK 1.02 KP 0.94 LA 0.97 MK 0.99 ! NL 0.98 NY 0.96 OV 0.93 PT 1.04 ! SC 1.02 TS 0.85 WZ 1.02 KB 0.82 ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.00* HN 1.05 HO 1.00* ! KK 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 0.90 NY 1.01 OV 0.97 PT 1.00* ! SC 0.99 TS 1.03 WZ 1.09 KB 0.75 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.96 HN 1.02 HO 1.00* ! KK 1.12 KP 0.97 LA 0.97 MK 1.03 ! NL 1.01 NY 0.98 OV 0.95 PT 1.04 ! SC 1.00 TS 0.87 WZ 1.03 KB 0.86 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.13 HO 1.00* ! KK 1.03 KP 0.97 LA 1.02 MK 0.94 ! NL 1.03 NY 1.01 OV 0.96 PT 1.04 ! SC 1.05 TS 0.81 WZ 1.02 KB 0.88 ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00* HN 1.03 HO 1.00* ! KK 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 0.99 NY 1.04 OV 1.01 PT 1.00* ! SC 1.02 TS 1.07 WZ 1.10 KB 0.72 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.97 HN 1.06 HO 1.00* ! KK 1.09 KP 0.98 LA 0.98 MK 1.00 ! NL 1.03 NY 1.02 OV 0.98 PT 1.03 ! SC 1.05 TS 0.90 WZ 1.01 KB 0.85 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 1.10 HO 1.00* ! KK 1.00 KP 0.97 LA 0.99 MK 0.97 ! NL 1.04 NY 0.98 OV 0.96 PT 1.03 ! SC 1.00 TS 0.85 WZ 1.02 KB 0.83 ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00* HN 1.07 HO 1.00* ! KK 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 0.95 NY 0.98 OV 1.01 PT 1.00* ! SC 0.97 TS 1.01 WZ 1.06 KB 0.77 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.94 HN 1.03 HO 1.00* ! KK 1.09 KP 0.99 LA 0.98 MK 1.03 ! NL 1.05 NY 0.99 OV 0.97 PT 1.03 ! SC 1.00 TS 0.91 WZ 1.01 KB 0.85 ! ! ! Fit before self-cal, rms=0.206307Jy sigma=0.001661 ! Fit after self-cal, rms=0.191811Jy sigma=0.001307 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6114 mas, bmaj=1.006 mas, bpa=-6.231 degrees ! Estimated noise=855.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0096306 Jy ! Component: 100 - total flux cleaned = -0.0136152 Jy ! Component: 150 - total flux cleaned = -0.0161996 Jy ! Component: 200 - total flux cleaned = -0.0168099 Jy ! Total flux subtracted in 200 components = -0.0168099 Jy ! Clean residual min=-0.009961 max=0.011698 Jy/beam ! Clean residual mean=0.000765 rms=0.002685 Jy/beam ! Combined flux in latest and established models = 1.38267 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 150 components and 1.38267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190986Jy sigma=0.001301 ! Fit after self-cal, rms=0.191109Jy sigma=0.001300 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191109Jy sigma=0.001300 ! Fit after self-cal, rms=0.184205Jy sigma=0.001209 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.613 mas, bmaj=1.006 mas, bpa=-6.576 degrees ! Estimated noise=856.053 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00253816 Jy ! Component: 100 - total flux cleaned = -0.00421806 Jy ! Component: 150 - total flux cleaned = -0.00564927 Jy ! Component: 200 - total flux cleaned = -0.00676586 Jy ! Total flux subtracted in 200 components = -0.00676586 Jy ! Clean residual min=-0.004675 max=0.008089 Jy/beam ! Clean residual mean=0.000654 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 1.37591 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 163 components and 1.37591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183823Jy sigma=0.001205 ! Fit after self-cal, rms=0.183834Jy sigma=0.001205 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.3, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788636 Jy ! Component: 100 - total flux cleaned = 0.010734 Jy ! Component: 150 - total flux cleaned = 0.0110312 Jy ! Component: 200 - total flux cleaned = 0.0111666 Jy ! Total flux subtracted in 200 components = 0.0111666 Jy ! Clean residual min=-0.004929 max=0.005646 Jy/beam ! Clean residual mean=0.000332 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 1.38707 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 189 components and 1.38707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183371Jy sigma=0.001200 ! Fit after self-cal, rms=0.183333Jy sigma=0.001200 ! Inverting map ! Added new window around map position (12.6, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398714 Jy ! Component: 100 - total flux cleaned = 0.00412995 Jy ! Component: 150 - total flux cleaned = 0.00425394 Jy ! Component: 200 - total flux cleaned = 0.00436576 Jy ! Total flux subtracted in 200 components = 0.00436576 Jy ! Clean residual min=-0.004958 max=0.005209 Jy/beam ! Clean residual mean=0.000203 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 1.39144 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 209 components and 1.39144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183095Jy sigma=0.001198 ! Fit after self-cal, rms=0.183078Jy sigma=0.001198 ! Inverting map ! Added new window around map position (15.8, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039596 Jy ! Component: 100 - total flux cleaned = 0.00396052 Jy ! Component: 150 - total flux cleaned = 0.0040666 Jy ! Component: 200 - total flux cleaned = 0.00416788 Jy ! Total flux subtracted in 200 components = 0.00416788 Jy ! Clean residual min=-0.004792 max=0.004772 Jy/beam ! Clean residual mean=0.000091 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 1.39561 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 222 components and 1.39561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182895Jy sigma=0.001196 ! Fit after self-cal, rms=0.182883Jy sigma=0.001196 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182883Jy sigma=0.001196 ! Fit after self-cal, rms=0.182398Jy sigma=0.001194 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6132 mas, bmaj=1.006 mas, bpa=-6.52 degrees ! Estimated noise=855.263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151277 Jy ! Component: 100 - total flux cleaned = 0.00196841 Jy ! Component: 150 - total flux cleaned = 0.00228182 Jy ! Component: 200 - total flux cleaned = 0.00257611 Jy ! Total flux subtracted in 200 components = 0.00257611 Jy ! Clean residual min=-0.004292 max=0.005004 Jy/beam ! Clean residual mean=0.000227 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 1.39818 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 239 components and 1.39818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182259Jy sigma=0.001193 ! Fit after self-cal, rms=0.182246Jy sigma=0.001193 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.1, 11.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028121 Jy ! Component: 100 - total flux cleaned = 0.00228668 Jy ! Component: 150 - total flux cleaned = 0.0023858 Jy ! Component: 200 - total flux cleaned = 0.00247643 Jy ! Total flux subtracted in 200 components = 0.00247643 Jy ! Clean residual min=-0.004315 max=0.004542 Jy/beam ! Clean residual mean=0.000154 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 1.40066 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 263 components and 1.40066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182068Jy sigma=0.001191 ! Fit after self-cal, rms=0.182052Jy sigma=0.001191 ! Inverting map ! Added new window around map position (8.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473649 Jy ! Component: 100 - total flux cleaned = 0.00661612 Jy ! Component: 150 - total flux cleaned = 0.00630615 Jy ! Component: 200 - total flux cleaned = 0.0063975 Jy ! Total flux subtracted in 200 components = 0.0063975 Jy ! Clean residual min=-0.004063 max=0.004072 Jy/beam ! Clean residual mean=-0.000030 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 1.40706 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 290 components and 1.40706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181858Jy sigma=0.001190 ! Fit after self-cal, rms=0.181857Jy sigma=0.001190 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181857Jy sigma=0.001190 ! Fit after self-cal, rms=0.181408Jy sigma=0.001189 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=2.631 mas, bpa=-9.148 degrees ! Estimated noise=1296.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366197 Jy ! Component: 100 - total flux cleaned = 0.00455663 Jy ! Component: 150 - total flux cleaned = 0.00497628 Jy ! Component: 200 - total flux cleaned = 0.00519969 Jy ! Total flux subtracted in 200 components = 0.00519969 Jy ! Clean residual min=-0.004862 max=0.005427 Jy/beam ! Clean residual mean=0.000294 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 1.41226 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 319 components and 1.41226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181377Jy sigma=0.001190 ! Fit after self-cal, rms=0.181340Jy sigma=0.001189 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000781407 Jy ! Component: 100 - total flux cleaned = 0.00097789 Jy ! Component: 150 - total flux cleaned = 0.00106732 Jy ! Component: 200 - total flux cleaned = 0.0011475 Jy ! Total flux subtracted in 200 components = 0.0011475 Jy ! Clean residual min=-0.004995 max=0.005313 Jy/beam ! Clean residual mean=0.000170 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 1.4134 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 344 components and 1.4134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181341Jy sigma=0.001190 ! Fit after self-cal, rms=0.181339Jy sigma=0.001190 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6131 mas, bmaj=1.006 mas, bpa=-6.471 degrees ! Estimated noise=854.287 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6131 x 1.006 at -6.471 degrees (North through East) ! Clean map min=-0.0036966 max=0.85114 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181339Jy sigma=0.001190 ! Fit after self-cal, rms=2.985478Jy sigma=0.001007 ! Inverting map and beam ! Estimated beam: bmin=0.6139 mas, bmaj=1.005 mas, bpa=-6.44 degrees ! Estimated noise=855.135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759567 Jy ! Component: 100 - total flux cleaned = 0.00117203 Jy ! Component: 150 - total flux cleaned = 0.00154435 Jy ! Component: 200 - total flux cleaned = 0.0019771 Jy ! Total flux subtracted in 200 components = 0.0019771 Jy ! Clean residual min=-0.003559 max=0.003946 Jy/beam ! Clean residual mean=0.000176 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 1.41538 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 367 components and 1.41538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.985450Jy sigma=0.001006 ! Fit after self-cal, rms=2.985477Jy sigma=0.001005 ! Inverting map ! Added new window around map position (10.5, -19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243334 Jy ! Component: 100 - total flux cleaned = 0.00224939 Jy ! Component: 150 - total flux cleaned = 0.0022499 Jy ! Component: 200 - total flux cleaned = 0.00233089 Jy ! Total flux subtracted in 200 components = 0.00233089 Jy ! Clean residual min=-0.003722 max=0.003664 Jy/beam ! Clean residual mean=0.000113 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 1.41771 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 384 components and 1.41771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.985412Jy sigma=0.001004 ! Fit after self-cal, rms=2.985405Jy sigma=0.001004 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.985405Jy sigma=0.001004 ! Fit after self-cal, rms=3.028524Jy sigma=0.001004 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5274 mas, bmaj=0.8518 mas, bpa=-11.2 degrees ! Estimated noise=1250.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.656345 Jy ! Component: 100 - total flux cleaned = 0.850764 Jy ! Component: 150 - total flux cleaned = 0.961601 Jy ! Component: 200 - total flux cleaned = 1.03852 Jy ! Total flux subtracted in 200 components = 1.03852 Jy ! Clean residual min=-0.014816 max=0.043882 Jy/beam ! Clean residual mean=0.000311 rms=0.004483 Jy/beam ! Combined flux in latest and established models = 1.03852 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.03852 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6136 mas, bmaj=1.005 mas, bpa=-6.405 degrees ! Estimated noise=855.346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0952203 Jy ! Component: 100 - total flux cleaned = 0.157891 Jy ! Component: 150 - total flux cleaned = 0.201124 Jy ! Component: 200 - total flux cleaned = 0.231763 Jy ! Total flux subtracted in 200 components = 0.231763 Jy ! Clean residual min=-0.002287 max=0.017273 Jy/beam ! Clean residual mean=0.004419 rms=0.002094 Jy/beam ! Combined flux in latest and established models = 1.27028 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 81 components and 1.27028 Jy ! Inverting map ! Added new window around map position (0.5, 0.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219999 Jy ! Component: 100 - total flux cleaned = 0.0385232 Jy ! Component: 150 - total flux cleaned = 0.0518221 Jy ! Component: 200 - total flux cleaned = 0.063075 Jy ! Total flux subtracted in 200 components = 0.063075 Jy ! Clean residual min=-0.002698 max=0.008239 Jy/beam ! Clean residual mean=0.002619 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 1.33336 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 130 components and 1.33336 Jy ! Inverting map ! Added new window around map position (9.8, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100656 Jy ! Component: 100 - total flux cleaned = 0.0187975 Jy ! Component: 150 - total flux cleaned = 0.0265492 Jy ! Component: 200 - total flux cleaned = 0.0334704 Jy ! Total flux subtracted in 200 components = 0.0334704 Jy ! Clean residual min=-0.003017 max=0.005903 Jy/beam ! Clean residual mean=0.001664 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 1.36683 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 188 components and 1.36683 Jy ! Inverting map ! Added new window around map position (13.8, -22.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654683 Jy ! Component: 100 - total flux cleaned = 0.0121842 Jy ! Component: 150 - total flux cleaned = 0.0172701 Jy ! Component: 200 - total flux cleaned = 0.0218751 Jy ! Total flux subtracted in 200 components = 0.0218751 Jy ! Clean residual min=-0.003139 max=0.004707 Jy/beam ! Clean residual mean=0.001043 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 1.3887 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 225 components and 1.3887 Jy ! Inverting map ! Added new window around map position (6.2, 22.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046866 Jy ! Component: 100 - total flux cleaned = 0.00850894 Jy ! Component: 150 - total flux cleaned = 0.0119753 Jy ! Component: 200 - total flux cleaned = 0.0151282 Jy ! Total flux subtracted in 200 components = 0.0151282 Jy ! Clean residual min=-0.003393 max=0.004261 Jy/beam ! Clean residual mean=0.000616 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 1.40383 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 247 components and 1.40383 Jy ! Inverting map ! Added new window around map position (3, 18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387507 Jy ! Component: 100 - total flux cleaned = 0.00567877 Jy ! Component: 150 - total flux cleaned = 0.00694583 Jy ! Component: 200 - total flux cleaned = 0.00824737 Jy ! Total flux subtracted in 200 components = 0.00824737 Jy ! Clean residual min=-0.003356 max=0.003685 Jy/beam ! Clean residual mean=0.000387 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 1.41208 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 275 components and 1.41208 Jy ! Inverting map ! Added new window around map position (-5, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164587 Jy ! Component: 100 - total flux cleaned = 0.00232411 Jy ! Component: 150 - total flux cleaned = 0.00297012 Jy ! Component: 200 - total flux cleaned = 0.00359404 Jy ! Total flux subtracted in 200 components = 0.00359404 Jy ! Clean residual min=-0.003546 max=0.003489 Jy/beam ! Clean residual mean=0.000286 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 1.41567 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 294 components and 1.41567 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=2.629 mas, bpa=-9.199 degrees ! Estimated noise=1298.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468612 Jy ! Component: 100 - total flux cleaned = 0.00745503 Jy ! Component: 150 - total flux cleaned = 0.00818682 Jy ! Component: 200 - total flux cleaned = 0.00858941 Jy ! Total flux subtracted in 200 components = 0.00858941 Jy ! Clean residual min=-0.004398 max=0.004979 Jy/beam ! Clean residual mean=0.000138 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 1.42426 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295178 Jy ! Component: 100 - total flux cleaned = 0.000563058 Jy ! Component: 150 - total flux cleaned = 0.00068682 Jy ! Component: 200 - total flux cleaned = 0.000743757 Jy ! Total flux subtracted in 200 components = 0.000743757 Jy ! Clean residual min=-0.004327 max=0.004858 Jy/beam ! Clean residual mean=0.000059 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 1.42501 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 354 components and 1.42501 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6136 mas, bmaj=1.005 mas, bpa=-6.405 degrees ! Estimated noise=855.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181042 Jy ! Component: 100 - total flux cleaned = -0.00222534 Jy ! Component: 150 - total flux cleaned = -0.00230146 Jy ! Component: 200 - total flux cleaned = -0.00201104 Jy ! Total flux subtracted in 200 components = -0.00201104 Jy ! Clean residual min=-0.003552 max=0.003178 Jy/beam ! Clean residual mean=0.000072 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 1.42299 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 373 components and 1.42299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.028340Jy sigma=0.001000 ! Fit after self-cal, rms=3.028301Jy sigma=0.000999 wmodel J0948+4039_X_2009_05_13_pus_map.mod ! Writing 373 model components to file: J0948+4039_X_2009_05_13_pus_map.mod wobs J0948+4039_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0948+4039_X_2009_05_13_pus_uvs.fits wwins J0948+4039_X_2009_05_13_pus_map.win ! wwins: Wrote 17 windows to J0948+4039_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000838613 Jy ! Component: 100 - total flux cleaned = -0.000839205 Jy ! Component: 150 - total flux cleaned = -0.000784161 Jy ! Component: 200 - total flux cleaned = -0.000677355 Jy ! Component: 250 - total flux cleaned = -0.000522695 Jy ! Component: 300 - total flux cleaned = -0.000321624 Jy ! Component: 350 - total flux cleaned = -0.000124107 Jy ! Component: 400 - total flux cleaned = 2.12576e-05 Jy ! Component: 450 - total flux cleaned = 0.000116836 Jy ! Component: 500 - total flux cleaned = 0.000305268 Jy ! Component: 550 - total flux cleaned = 0.000444372 Jy ! Component: 600 - total flux cleaned = 0.000536421 Jy ! Component: 650 - total flux cleaned = 0.000762814 Jy ! Component: 700 - total flux cleaned = 0.000807035 Jy ! Component: 750 - total flux cleaned = 0.000807166 Jy ! Component: 800 - total flux cleaned = 0.000894789 Jy ! Component: 850 - total flux cleaned = 0.00093805 Jy ! Component: 900 - total flux cleaned = 0.000980803 Jy ! Component: 950 - total flux cleaned = 0.00102321 Jy ! Component: 1000 - total flux cleaned = 0.0010653 Jy ! Component: 1050 - total flux cleaned = 0.0011069 Jy ! Component: 1100 - total flux cleaned = 0.00114812 Jy ! Component: 1150 - total flux cleaned = 0.00110739 Jy ! Component: 1200 - total flux cleaned = 0.00127034 Jy ! Component: 1250 - total flux cleaned = 0.00131057 Jy ! Component: 1300 - total flux cleaned = 0.0013106 Jy ! Component: 1350 - total flux cleaned = 0.00142984 Jy ! Component: 1400 - total flux cleaned = 0.00142972 Jy ! Component: 1450 - total flux cleaned = 0.00142973 Jy ! Component: 1500 - total flux cleaned = 0.00150756 Jy ! Component: 1550 - total flux cleaned = 0.00154611 Jy ! Component: 1600 - total flux cleaned = 0.0015459 Jy ! Component: 1650 - total flux cleaned = 0.00158412 Jy ! Component: 1700 - total flux cleaned = 0.0016219 Jy ! Component: 1750 - total flux cleaned = 0.00165957 Jy ! Component: 1800 - total flux cleaned = 0.00165957 Jy ! Component: 1850 - total flux cleaned = 0.00173403 Jy ! Component: 1900 - total flux cleaned = 0.00169696 Jy ! Component: 1950 - total flux cleaned = 0.00177063 Jy ! Component: 2000 - total flux cleaned = 0.0017706 Jy ! Component: 2050 - total flux cleaned = 0.00177062 Jy ! Component: 2100 - total flux cleaned = 0.0018431 Jy ! Component: 2150 - total flux cleaned = 0.00184303 Jy ! Component: 2200 - total flux cleaned = 0.00187893 Jy ! Component: 2250 - total flux cleaned = 0.00184323 Jy ! Component: 2300 - total flux cleaned = 0.00187883 Jy ! Component: 2350 - total flux cleaned = 0.00191428 Jy ! Component: 2400 - total flux cleaned = 0.00191426 Jy ! Component: 2450 - total flux cleaned = 0.00194929 Jy ! Component: 2500 - total flux cleaned = 0.00198407 Jy ! Component: 2550 - total flux cleaned = 0.00198395 Jy ! Component: 2600 - total flux cleaned = 0.00201844 Jy ! Component: 2650 - total flux cleaned = 0.00194981 Jy ! Component: 2700 - total flux cleaned = 0.00201825 Jy ! Component: 2750 - total flux cleaned = 0.00198424 Jy ! Component: 2800 - total flux cleaned = 0.00201829 Jy ! Component: 2850 - total flux cleaned = 0.00205208 Jy ! Component: 2900 - total flux cleaned = 0.00205202 Jy ! Component: 2950 - total flux cleaned = 0.00205195 Jy ! Component: 3000 - total flux cleaned = 0.00208531 Jy ! Component: 3050 - total flux cleaned = 0.00208536 Jy ! Component: 3100 - total flux cleaned = 0.00208535 Jy ! Component: 3150 - total flux cleaned = 0.00211829 Jy ! Component: 3200 - total flux cleaned = 0.0021183 Jy ! Component: 3250 - total flux cleaned = 0.00215087 Jy ! Component: 3300 - total flux cleaned = 0.00215091 Jy ! Component: 3350 - total flux cleaned = 0.00215092 Jy ! Component: 3400 - total flux cleaned = 0.00218301 Jy ! Component: 3450 - total flux cleaned = 0.00218313 Jy ! Component: 3500 - total flux cleaned = 0.00218313 Jy ! Component: 3550 - total flux cleaned = 0.00218316 Jy ! Component: 3600 - total flux cleaned = 0.00221497 Jy ! Component: 3650 - total flux cleaned = 0.00221499 Jy ! Component: 3700 - total flux cleaned = 0.00221501 Jy ! Component: 3750 - total flux cleaned = 0.00227771 Jy ! Component: 3800 - total flux cleaned = 0.00224649 Jy ! Component: 3850 - total flux cleaned = 0.00224652 Jy ! Component: 3900 - total flux cleaned = 0.00227751 Jy ! Component: 3950 - total flux cleaned = 0.00227757 Jy ! Component: 4000 - total flux cleaned = 0.0023083 Jy ! Component: 4050 - total flux cleaned = 0.00233894 Jy ! Total flux subtracted in 4096 components = 0.00233886 Jy ! Clean residual min=-0.001861 max=0.001729 Jy/beam ! Clean residual mean=0.000034 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 1.42533 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 694 components and 1.42533 Jy ![Exited script file: muppet] wmap "J0948+4039_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6136 x 1.005 at -6.405 degrees (North through East) ! Clean map min=-0.0033475 max=0.85456 Jy/beam ! Writing clean map to FITS file: J0948+4039_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.854564 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000552851 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.194082 0.194082 0.388164 0.776327 1.55265 3.10531 6.21062 12.4212 24.8425 49.6849 99.3699 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.854 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6136 x 1.005 at -6.405 degrees (North through East) ! Clean map min=-0.0033475 max=0.85456 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0948+4039_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:41:41 2017