! Started logfile: J0829+1754_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:40:52 2017 obs J0829+1754_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0829+1754_X_2009_05_13_pus_uva.fits ! AN table 1: 191 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.293979 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0829+1754 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 26952 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0829+1754_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1390 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1430 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1469 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1470 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008547Jy sigma=0.009475 ! Fit after self-cal, rms=0.938910Jy sigma=0.008841 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.967 mas, bmaj=1.525 mas, bpa=-19.72 degrees ! Estimated noise=914.751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052197 Jy ! Component: 100 - total flux cleaned = 0.0643036 Jy ! Total flux subtracted in 100 components = 0.0643036 Jy ! Clean residual min=-0.004107 max=0.004654 Jy/beam ! Clean residual mean=-0.000036 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.0643036 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0643036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123873Jy sigma=0.001098 ! Fit after self-cal, rms=0.122288Jy sigma=0.001084 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724084 Jy ! Component: 100 - total flux cleaned = 0.0100798 Jy ! Total flux subtracted in 100 components = 0.0100798 Jy ! Clean residual min=-0.003793 max=0.003694 Jy/beam ! Clean residual mean=-0.000022 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.0743834 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.0743834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121862Jy sigma=0.001080 ! Fit after self-cal, rms=0.121834Jy sigma=0.001080 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.272 mas, bmaj=1.823 mas, bpa=-16.64 degrees ! Estimated noise=475.369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376227 Jy ! Component: 100 - total flux cleaned = 0.00414456 Jy ! Component: 150 - total flux cleaned = 0.00419319 Jy ! Component: 200 - total flux cleaned = 0.00419556 Jy ! Total flux subtracted in 200 components = 0.00419556 Jy ! Clean residual min=-0.002201 max=0.002815 Jy/beam ! Clean residual mean=-0.000026 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0785789 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 47 components and 0.0785789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121713Jy sigma=0.001079 ! Fit after self-cal, rms=0.121626Jy sigma=0.001078 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.98 HO 1.00* ! KK 1.00* KP 1.02 LA 1.02 MK 1.04 ! NL 1.06 NY 1.00* OV 1.03 PT 0.96 ! SC 0.99 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.02 HO 1.00* ! KK 1.00* KP 1.03 LA 0.97 MK 1.07 ! NL 0.99 NY 1.00* OV 1.06 PT 1.04 ! SC 1.02 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 0.92 HO 1.00* ! KK 1.00* KP 1.02 LA 0.97 MK 0.92 ! NL 1.09 NY 1.00* OV 1.03 PT 0.99 ! SC 0.98 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.91 HN 0.91 HO 1.00* ! KK 1.00* KP 0.94 LA 0.94 MK 0.96 ! NL 0.99 NY 1.00* OV 1.00 PT 1.02 ! SC 0.89 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Fit before self-cal, rms=0.121626Jy sigma=0.001078 ! Fit after self-cal, rms=0.119614Jy sigma=0.001078 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.263 mas, bmaj=1.809 mas, bpa=-16.43 degrees ! Estimated noise=474.991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199725 Jy ! Component: 100 - total flux cleaned = 0.00199636 Jy ! Component: 150 - total flux cleaned = 0.00200241 Jy ! Component: 200 - total flux cleaned = 0.00191408 Jy ! Total flux subtracted in 200 components = 0.00191408 Jy ! Clean residual min=-0.002079 max=0.002066 Jy/beam ! Clean residual mean=-0.000019 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.080493 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.080493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119574Jy sigma=0.001077 ! Fit after self-cal, rms=0.119533Jy sigma=0.001077 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119533Jy sigma=0.001077 ! Fit after self-cal, rms=0.119558Jy sigma=0.001076 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.253 mas, bmaj=1.811 mas, bpa=-16.45 degrees ! Estimated noise=477.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000639387 Jy ! Component: 100 - total flux cleaned = 0.000699737 Jy ! Component: 150 - total flux cleaned = 0.000675131 Jy ! Component: 200 - total flux cleaned = 0.000675536 Jy ! Total flux subtracted in 200 components = 0.000675536 Jy ! Clean residual min=-0.002058 max=0.001831 Jy/beam ! Clean residual mean=-0.000015 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0811686 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.0811686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119542Jy sigma=0.001076 ! Fit after self-cal, rms=0.119523Jy sigma=0.001076 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395782 Jy ! Component: 100 - total flux cleaned = 0.000369862 Jy ! Component: 150 - total flux cleaned = 0.000347097 Jy ! Component: 200 - total flux cleaned = 0.000347662 Jy ! Total flux subtracted in 200 components = 0.000347662 Jy ! Clean residual min=-0.002059 max=0.001781 Jy/beam ! Clean residual mean=-0.000016 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0815162 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.0815162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119511Jy sigma=0.001076 ! Fit after self-cal, rms=0.119505Jy sigma=0.001076 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119505Jy sigma=0.001076 ! Fit after self-cal, rms=0.119780Jy sigma=0.001076 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.246 mas, bmaj=1.812 mas, bpa=-16.55 degrees ! Estimated noise=478.046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060801 Jy ! Component: 100 - total flux cleaned = 0.000753921 Jy ! Component: 150 - total flux cleaned = 0.000732821 Jy ! Component: 200 - total flux cleaned = 0.000751566 Jy ! Total flux subtracted in 200 components = 0.000751566 Jy ! Clean residual min=-0.002062 max=0.001787 Jy/beam ! Clean residual mean=-0.000015 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0822678 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.0822678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119769Jy sigma=0.001075 ! Fit after self-cal, rms=0.119771Jy sigma=0.001075 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171421 Jy ! Component: 100 - total flux cleaned = 0.000130762 Jy ! Component: 150 - total flux cleaned = 0.000131517 Jy ! Component: 200 - total flux cleaned = 0.000113393 Jy ! Total flux subtracted in 200 components = 0.000113393 Jy ! Clean residual min=-0.002057 max=0.001823 Jy/beam ! Clean residual mean=-0.000015 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0823812 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.0823812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119764Jy sigma=0.001075 ! Fit after self-cal, rms=0.119762Jy sigma=0.001075 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119762Jy sigma=0.001075 ! Fit after self-cal, rms=0.120070Jy sigma=0.001075 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.442 mas, bmaj=2.835 mas, bpa=-4.79 degrees ! Estimated noise=554.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000740915 Jy ! Component: 100 - total flux cleaned = 0.000875426 Jy ! Component: 150 - total flux cleaned = 0.000922947 Jy ! Component: 200 - total flux cleaned = 0.00092337 Jy ! Total flux subtracted in 200 components = 0.00092337 Jy ! Clean residual min=-0.002165 max=0.001853 Jy/beam ! Clean residual mean=-0.000024 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0833046 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.0833046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120067Jy sigma=0.001075 ! Fit after self-cal, rms=0.120067Jy sigma=0.001075 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181488 Jy ! Component: 100 - total flux cleaned = 0.000211043 Jy ! Component: 150 - total flux cleaned = 0.000224742 Jy ! Component: 200 - total flux cleaned = 0.000224974 Jy ! Total flux subtracted in 200 components = 0.000224974 Jy ! Clean residual min=-0.002152 max=0.001849 Jy/beam ! Clean residual mean=-0.000023 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0835296 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 117 components and 0.0835296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120066Jy sigma=0.001075 ! Fit after self-cal, rms=0.120063Jy sigma=0.001075 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.241 mas, bmaj=1.812 mas, bpa=-16.61 degrees ! Estimated noise=479.102 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.241 x 1.812 at -16.61 degrees (North through East) ! Clean map min=-0.0020806 max=0.069583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9467 mas, bmaj=1.514 mas, bpa=-19.64 degrees ! Estimated noise=903.736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0532235 Jy ! Component: 100 - total flux cleaned = 0.0677843 Jy ! Component: 150 - total flux cleaned = 0.0756251 Jy ! Component: 200 - total flux cleaned = 0.080687 Jy ! Total flux subtracted in 200 components = 0.080687 Jy ! Clean residual min=-0.003677 max=0.003538 Jy/beam ! Clean residual mean=-0.000013 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.080687 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.080687 Jy ! Inverting map and beam ! Estimated beam: bmin=1.241 mas, bmaj=1.812 mas, bpa=-16.61 degrees ! Estimated noise=479.102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026663 Jy ! Component: 100 - total flux cleaned = 0.00282409 Jy ! Component: 150 - total flux cleaned = 0.00294984 Jy ! Component: 200 - total flux cleaned = 0.00300171 Jy ! Total flux subtracted in 200 components = 0.00300171 Jy ! Clean residual min=-0.002075 max=0.001934 Jy/beam ! Clean residual mean=-0.000014 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0836887 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 47 components and 0.0836887 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.442 mas, bmaj=2.835 mas, bpa=-4.79 degrees ! Estimated noise=554.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268297 Jy ! Component: 100 - total flux cleaned = 0.000302391 Jy ! Component: 150 - total flux cleaned = 0.000272821 Jy ! Component: 200 - total flux cleaned = 0.000246834 Jy ! Total flux subtracted in 200 components = 0.000246834 Jy ! Clean residual min=-0.002174 max=0.001804 Jy/beam ! Clean residual mean=-0.000022 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0839355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.89937e-07 Jy ! Component: 100 - total flux cleaned = -2.25009e-05 Jy ! Component: 150 - total flux cleaned = -2.17734e-05 Jy ! Component: 200 - total flux cleaned = -4.17209e-05 Jy ! Total flux subtracted in 200 components = -4.17209e-05 Jy ! Clean residual min=-0.002158 max=0.001815 Jy/beam ! Clean residual mean=-0.000022 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0838938 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 81 components and 0.0838938 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.241 mas, bmaj=1.812 mas, bpa=-16.61 degrees ! Estimated noise=479.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.9786e-06 Jy ! Component: 100 - total flux cleaned = -0.000104404 Jy ! Component: 150 - total flux cleaned = -0.000197399 Jy ! Component: 200 - total flux cleaned = -0.000282728 Jy ! Total flux subtracted in 200 components = -0.000282728 Jy ! Clean residual min=-0.002077 max=0.001776 Jy/beam ! Clean residual mean=-0.000014 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0836111 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 0.0836111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120081Jy sigma=0.001075 ! Fit after self-cal, rms=0.120083Jy sigma=0.001075 wmodel J0829+1754_X_2009_05_13_pus_map.mod ! Writing 101 model components to file: J0829+1754_X_2009_05_13_pus_map.mod wobs J0829+1754_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0829+1754_X_2009_05_13_pus_uvs.fits wwins J0829+1754_X_2009_05_13_pus_map.win ! wwins: Wrote 2 windows to J0829+1754_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000504688 Jy ! Component: 100 - total flux cleaned = -0.000828961 Jy ! Component: 150 - total flux cleaned = -0.00113667 Jy ! Component: 200 - total flux cleaned = -0.00134458 Jy ! Component: 250 - total flux cleaned = -0.00160046 Jy ! Component: 300 - total flux cleaned = -0.00168338 Jy ! Component: 350 - total flux cleaned = -0.00181694 Jy ! Component: 400 - total flux cleaned = -0.00186928 Jy ! Component: 450 - total flux cleaned = -0.00194518 Jy ! Component: 500 - total flux cleaned = -0.00204409 Jy ! Component: 550 - total flux cleaned = -0.00216481 Jy ! Component: 600 - total flux cleaned = -0.00221239 Jy ! Component: 650 - total flux cleaned = -0.00237465 Jy ! Component: 700 - total flux cleaned = -0.00239769 Jy ! Component: 750 - total flux cleaned = -0.00253149 Jy ! Component: 800 - total flux cleaned = -0.00255333 Jy ! Component: 850 - total flux cleaned = -0.00259662 Jy ! Component: 900 - total flux cleaned = -0.00268194 Jy ! Component: 950 - total flux cleaned = -0.00270305 Jy ! Component: 1000 - total flux cleaned = -0.0027442 Jy ! Component: 1050 - total flux cleaned = -0.00282555 Jy ! Component: 1100 - total flux cleaned = -0.00284562 Jy ! Component: 1150 - total flux cleaned = -0.00288519 Jy ! Component: 1200 - total flux cleaned = -0.00294345 Jy ! Component: 1250 - total flux cleaned = -0.00298202 Jy ! Component: 1300 - total flux cleaned = -0.00303889 Jy ! Component: 1350 - total flux cleaned = -0.003095 Jy ! Component: 1400 - total flux cleaned = -0.00313187 Jy ! Component: 1450 - total flux cleaned = -0.00316847 Jy ! Component: 1500 - total flux cleaned = -0.00324114 Jy ! Component: 1550 - total flux cleaned = -0.00336585 Jy ! Component: 1600 - total flux cleaned = -0.00336555 Jy ! Component: 1650 - total flux cleaned = -0.00345273 Jy ! Component: 1700 - total flux cleaned = -0.00352161 Jy ! Component: 1750 - total flux cleaned = -0.00357266 Jy ! Component: 1800 - total flux cleaned = -0.00367348 Jy ! Component: 1850 - total flux cleaned = -0.00372328 Jy ! Component: 1900 - total flux cleaned = -0.00375629 Jy ! Component: 1950 - total flux cleaned = -0.00393618 Jy ! Component: 2000 - total flux cleaned = -0.00398472 Jy ! Component: 2050 - total flux cleaned = -0.00408109 Jy ! Component: 2100 - total flux cleaned = -0.00414456 Jy ! Component: 2150 - total flux cleaned = -0.00423905 Jy ! Component: 2200 - total flux cleaned = -0.00425474 Jy ! Component: 2250 - total flux cleaned = -0.00434747 Jy ! Component: 2300 - total flux cleaned = -0.00443954 Jy ! Component: 2350 - total flux cleaned = -0.00451545 Jy ! Component: 2400 - total flux cleaned = -0.00454553 Jy ! Component: 2450 - total flux cleaned = -0.00463509 Jy ! Component: 2500 - total flux cleaned = -0.00463514 Jy ! Component: 2550 - total flux cleaned = -0.00473781 Jy ! Component: 2600 - total flux cleaned = -0.00478154 Jy ! Component: 2650 - total flux cleaned = -0.00486795 Jy ! Component: 2700 - total flux cleaned = -0.0049252 Jy ! Component: 2750 - total flux cleaned = -0.00499634 Jy ! Component: 2800 - total flux cleaned = -0.00510888 Jy ! Component: 2850 - total flux cleaned = -0.00516477 Jy ! Component: 2900 - total flux cleaned = -0.00522015 Jy ! Component: 2950 - total flux cleaned = -0.00527527 Jy ! Component: 3000 - total flux cleaned = -0.00538434 Jy ! Component: 3050 - total flux cleaned = -0.00545204 Jy ! Component: 3100 - total flux cleaned = -0.00558644 Jy ! Component: 3150 - total flux cleaned = -0.00566639 Jy ! Component: 3200 - total flux cleaned = -0.00578545 Jy ! Component: 3250 - total flux cleaned = -0.00581165 Jy ! Component: 3300 - total flux cleaned = -0.00586383 Jy ! Component: 3350 - total flux cleaned = -0.00596755 Jy ! Component: 3400 - total flux cleaned = -0.00605753 Jy ! Component: 3450 - total flux cleaned = -0.00615944 Jy ! Component: 3500 - total flux cleaned = -0.00618469 Jy ! Component: 3550 - total flux cleaned = -0.00627282 Jy ! Component: 3600 - total flux cleaned = -0.00634781 Jy ! Component: 3650 - total flux cleaned = -0.00639752 Jy ! Component: 3700 - total flux cleaned = -0.00650859 Jy ! Component: 3750 - total flux cleaned = -0.00659451 Jy ! Component: 3800 - total flux cleaned = -0.00664338 Jy ! Component: 3850 - total flux cleaned = -0.00670398 Jy ! Component: 3900 - total flux cleaned = -0.00681254 Jy ! Component: 3950 - total flux cleaned = -0.0068844 Jy ! Component: 4000 - total flux cleaned = -0.00696778 Jy ! Component: 4050 - total flux cleaned = -0.00700338 Jy ! Total flux subtracted in 4096 components = -0.00708576 Jy ! Clean residual min=-0.000708 max=0.000711 Jy/beam ! Clean residual mean=-0.000005 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.0765253 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 387 components and 0.0765253 Jy ![Exited script file: muppet] wmap "J0829+1754_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.241 x 1.812 at -16.61 degrees (North through East) ! Clean map min=-0.0013944 max=0.068957 Jy/beam ! Writing clean map to FITS file: J0829+1754_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.068957 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229759 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.999577 0.999577 1.99915 3.99831 7.99661 15.9932 31.9865 63.9729 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.241 x 1.812 at -16.61 degrees (North through East) ! Clean map min=-0.0013944 max=0.068957 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0829+1754_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:40:59 2017