! Started logfile: J0730-1141_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:40:26 2017 obs J0730-1141_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0730-1141_X_2009_05_13_pus_uva.fits ! AN table 1: 21 integrations on 120 of 120 possible baselines. ! AN table 2: 13 integrations on 120 of 120 possible baselines. ! AN table 3: 42 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.177193 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0730-1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 6464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0730-1141_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 195 telescope corrections were flagged in sub-array 1. ! A total of 86 telescope corrections were flagged in sub-array 2. ! A total of 470 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 195 telescope corrections were flagged in sub-array 1. ! A total of 86 telescope corrections were flagged in sub-array 2. ! A total of 470 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 195 telescope corrections were flagged in sub-array 1. ! A total of 86 telescope corrections were flagged in sub-array 2. ! A total of 470 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 195 telescope corrections were flagged in sub-array 1. ! A total of 86 telescope corrections were flagged in sub-array 2. ! A total of 470 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=4.646735Jy sigma=0.037649 ! Fit after self-cal, rms=4.620466Jy sigma=0.037440 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5966 mas, bmaj=0.9966 mas, bpa=-9.943 degrees ! Estimated noise=1508.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.10967 Jy ! Component: 100 - total flux cleaned = 5.0899 Jy ! Total flux subtracted in 100 components = 5.0899 Jy ! Clean residual min=-0.209398 max=0.401229 Jy/beam ! Clean residual mean=0.001317 rms=0.043583 Jy/beam ! Combined flux in latest and established models = 5.0899 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 5.0899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.220432Jy sigma=0.008951 ! Fit after self-cal, rms=1.220382Jy sigma=0.008950 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.442759 Jy ! Component: 100 - total flux cleaned = 0.563048 Jy ! Total flux subtracted in 100 components = 0.563048 Jy ! Clean residual min=-0.172511 max=0.222078 Jy/beam ! Clean residual mean=-0.000111 rms=0.034056 Jy/beam ! Combined flux in latest and established models = 5.65295 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 5.65295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.023246Jy sigma=0.007542 ! Fit after self-cal, rms=1.023139Jy sigma=0.007541 ! Inverting map ! Added new window around map position (-1.1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1047 Jy ! Component: 100 - total flux cleaned = 0.136475 Jy ! Total flux subtracted in 100 components = 0.136475 Jy ! Clean residual min=-0.145360 max=0.180114 Jy/beam ! Clean residual mean=-0.000452 rms=0.030950 Jy/beam ! Combined flux in latest and established models = 5.78942 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 5.78942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.940122Jy sigma=0.007231 ! Fit after self-cal, rms=0.938914Jy sigma=0.007224 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7013 mas, bmaj=1.17 mas, bpa=-6.617 degrees ! Estimated noise=1107.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115491 Jy ! Component: 100 - total flux cleaned = 0.131407 Jy ! Component: 150 - total flux cleaned = 0.136372 Jy ! Component: 200 - total flux cleaned = 0.140963 Jy ! Total flux subtracted in 200 components = 0.140963 Jy ! Clean residual min=-0.107400 max=0.104716 Jy/beam ! Clean residual mean=-0.012457 rms=0.023284 Jy/beam ! Combined flux in latest and established models = 5.93038 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 5.93039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.850536Jy sigma=0.006923 ! Fit after self-cal, rms=0.849559Jy sigma=0.006917 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.99 HO 1.00* ! KK 1.01 KP 1.00 LA 0.98 MK 1.01 ! NL 1.04 NY 1.00* OV 0.98 PT 0.97 ! SC 0.98 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.97 HN 1.01 HO 1.00* ! KK 1.10 KP 1.01 LA 0.99 MK 1.03 ! NL 1.00 NY 1.00* OV 0.97 PT 0.98 ! SC 0.98 TS 1.00* WZ 1.00* KB 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00* HN 1.00* HO 0.79 ! KK 1.06 KP 1.00* LA 1.00* MK 1.00 ! NL 1.00* NY 1.00* OV 0.98 PT 1.00* ! SC 1.00* TS 0.99 WZ 1.00* KB 1.10 ! ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.00 HO 1.00* ! KK 1.01 KP 0.96 LA 0.96 MK 1.01 ! NL 1.04 NY 1.00* OV 0.96 PT 1.01 ! SC 0.99 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.96 HN 1.01 HO 1.00* ! KK 1.09 KP 0.96 LA 0.98 MK 1.03 ! NL 0.99 NY 1.00* OV 0.96 PT 1.03 ! SC 0.99 TS 1.00* WZ 1.00* KB 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.00* HN 1.00* HO 0.79 ! KK 1.03 KP 1.00* LA 1.00* MK 1.00 ! NL 1.00* NY 1.00* OV 0.96 PT 1.00* ! SC 1.00* TS 0.99 WZ 1.00* KB 1.09 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.01 HO 1.00* ! KK 1.01 KP 0.98 LA 0.99 MK 0.97 ! NL 1.08 NY 1.00* OV 0.99 PT 1.01 ! SC 1.03 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 1.02 HO 1.00* ! KK 1.07 KP 0.98 LA 1.00 MK 1.00 ! NL 1.03 NY 1.00* OV 0.98 PT 1.03 ! SC 1.02 TS 1.00* WZ 1.00* KB 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00* HN 1.00* HO 0.81 ! KK 1.05 KP 1.00* LA 1.00* MK 0.97 ! NL 1.00* NY 1.00* OV 1.00 PT 1.00* ! SC 1.00* TS 1.00 WZ 1.00* KB 1.09 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.99 HO 1.00* ! KK 1.00 KP 0.98 LA 0.97 MK 1.00 ! NL 1.09 NY 1.00* OV 0.98 PT 1.01 ! SC 0.98 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 1.00 HO 1.00* ! KK 1.06 KP 0.98 LA 0.98 MK 1.02 ! NL 1.04 NY 1.00* OV 0.98 PT 1.02 ! SC 0.98 TS 1.00* WZ 1.00* KB 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00* HN 1.00* HO 0.82 ! KK 1.04 KP 1.00* LA 1.00* MK 0.99 ! NL 1.00* NY 1.00* OV 0.98 PT 1.00* ! SC 1.00* TS 1.01 WZ 1.00* KB 1.10 ! ! ! Fit before self-cal, rms=0.849559Jy sigma=0.006917 ! Fit after self-cal, rms=0.673870Jy sigma=0.006142 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6991 mas, bmaj=1.154 mas, bpa=-8.13 degrees ! Estimated noise=1106.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0104324 Jy ! Component: 100 - total flux cleaned = -0.0121145 Jy ! Component: 150 - total flux cleaned = -0.0135457 Jy ! Component: 200 - total flux cleaned = -0.0122417 Jy ! Total flux subtracted in 200 components = -0.0122417 Jy ! Clean residual min=-0.068830 max=0.068229 Jy/beam ! Clean residual mean=0.000372 rms=0.016217 Jy/beam ! Combined flux in latest and established models = 5.91814 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 5.91814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.665250Jy sigma=0.006088 ! Fit after self-cal, rms=0.664712Jy sigma=0.006084 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.664712Jy sigma=0.006084 ! Fit after self-cal, rms=0.751959Jy sigma=0.004878 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6953 mas, bmaj=1.171 mas, bpa=-8.201 degrees ! Estimated noise=1118.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0834318 Jy ! Component: 100 - total flux cleaned = 0.131652 Jy ! Component: 150 - total flux cleaned = 0.141944 Jy ! Component: 200 - total flux cleaned = 0.148084 Jy ! Total flux subtracted in 200 components = 0.148084 Jy ! Clean residual min=-0.031844 max=0.089358 Jy/beam ! Clean residual mean=0.022547 rms=0.013473 Jy/beam ! Combined flux in latest and established models = 6.06623 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 6.06623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.738869Jy sigma=0.004790 ! Fit after self-cal, rms=0.738201Jy sigma=0.004783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.1, -4.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0838048 Jy ! Component: 100 - total flux cleaned = 0.116644 Jy ! Component: 150 - total flux cleaned = 0.12254 Jy ! Component: 200 - total flux cleaned = 0.126258 Jy ! Total flux subtracted in 200 components = 0.126258 Jy ! Clean residual min=-0.032072 max=0.066973 Jy/beam ! Clean residual mean=0.020216 rms=0.013191 Jy/beam ! Combined flux in latest and established models = 6.19249 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 6.19249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.723543Jy sigma=0.004699 ! Fit after self-cal, rms=0.722909Jy sigma=0.004692 ! Inverting map ! Added new window around map position (10.1, 20.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0669233 Jy ! Component: 100 - total flux cleaned = 0.100422 Jy ! Component: 150 - total flux cleaned = 0.105576 Jy ! Component: 200 - total flux cleaned = 0.109019 Jy ! Total flux subtracted in 200 components = 0.109019 Jy ! Clean residual min=-0.033547 max=0.060071 Jy/beam ! Clean residual mean=0.018169 rms=0.012434 Jy/beam ! Combined flux in latest and established models = 6.30151 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 111 components and 6.3015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.712498Jy sigma=0.004636 ! Fit after self-cal, rms=0.712298Jy sigma=0.004631 ! Inverting map ! Added new window around map position (5.2, 8.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0634164 Jy ! Component: 100 - total flux cleaned = 0.101833 Jy ! Component: 150 - total flux cleaned = 0.120908 Jy ! Component: 200 - total flux cleaned = 0.13157 Jy ! Total flux subtracted in 200 components = 0.13157 Jy ! Clean residual min=-0.035487 max=0.054148 Jy/beam ! Clean residual mean=0.015750 rms=0.011874 Jy/beam ! Combined flux in latest and established models = 6.43307 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 139 components and 6.43308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705046Jy sigma=0.004571 ! Fit after self-cal, rms=0.705120Jy sigma=0.004569 ! Inverting map ! Added new window around map position (3.1, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0559614 Jy ! Component: 100 - total flux cleaned = 0.0892632 Jy ! Component: 150 - total flux cleaned = 0.103581 Jy ! Component: 200 - total flux cleaned = 0.111575 Jy ! Total flux subtracted in 200 components = 0.111575 Jy ! Clean residual min=-0.036265 max=0.048858 Jy/beam ! Clean residual mean=0.013790 rms=0.011541 Jy/beam ! Combined flux in latest and established models = 6.54465 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 166 components and 6.54465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.698083Jy sigma=0.004528 ! Fit after self-cal, rms=0.698113Jy sigma=0.004525 ! Inverting map ! Added new window around map position (-3.1, -14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.051592 Jy ! Component: 100 - total flux cleaned = 0.083906 Jy ! Component: 150 - total flux cleaned = 0.103082 Jy ! Component: 200 - total flux cleaned = 0.116735 Jy ! Total flux subtracted in 200 components = 0.116735 Jy ! Clean residual min=-0.037287 max=0.046165 Jy/beam ! Clean residual mean=0.011583 rms=0.010717 Jy/beam ! Combined flux in latest and established models = 6.66139 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 191 components and 6.66139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.692688Jy sigma=0.004483 ! Fit after self-cal, rms=0.692576Jy sigma=0.004481 ! Inverting map ! Added new window around map position (-18.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0485182 Jy ! Component: 100 - total flux cleaned = 0.059954 Jy ! Component: 150 - total flux cleaned = 0.0674627 Jy ! Component: 200 - total flux cleaned = 0.0684214 Jy ! Total flux subtracted in 200 components = 0.0684214 Jy ! Clean residual min=-0.040613 max=0.046571 Jy/beam ! Clean residual mean=0.010633 rms=0.010481 Jy/beam ! Combined flux in latest and established models = 6.72981 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 212 components and 6.72981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684043Jy sigma=0.004458 ! Fit after self-cal, rms=0.683787Jy sigma=0.004455 ! Inverting map ! Added new window around map position (-6.1, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428258 Jy ! Component: 100 - total flux cleaned = 0.0562236 Jy ! Component: 150 - total flux cleaned = 0.0622384 Jy ! Component: 200 - total flux cleaned = 0.0660289 Jy ! Total flux subtracted in 200 components = 0.0660289 Jy ! Clean residual min=-0.041916 max=0.045777 Jy/beam ! Clean residual mean=0.009472 rms=0.009906 Jy/beam ! Combined flux in latest and established models = 6.79584 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 240 components and 6.79584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.677474Jy sigma=0.004433 ! Fit after self-cal, rms=0.677334Jy sigma=0.004431 ! Inverting map ! Added new window around map position (-0.9, 9.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463595 Jy ! Component: 100 - total flux cleaned = 0.0713599 Jy ! Component: 150 - total flux cleaned = 0.0793031 Jy ! Component: 200 - total flux cleaned = 0.0849495 Jy ! Total flux subtracted in 200 components = 0.0849495 Jy ! Clean residual min=-0.039745 max=0.045093 Jy/beam ! Clean residual mean=0.007914 rms=0.009286 Jy/beam ! Combined flux in latest and established models = 6.88078 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 268 components and 6.88078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.672010Jy sigma=0.004401 ! Fit after self-cal, rms=0.672030Jy sigma=0.004400 ! Inverting map ! Added new window around map position (25, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174078 Jy ! Component: 100 - total flux cleaned = 0.0173467 Jy ! Component: 150 - total flux cleaned = 0.0173088 Jy ! Component: 200 - total flux cleaned = 0.0195443 Jy ! Total flux subtracted in 200 components = 0.0195443 Jy ! Clean residual min=-0.035242 max=0.039530 Jy/beam ! Clean residual mean=0.007684 rms=0.008991 Jy/beam ! Combined flux in latest and established models = 6.90033 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 288 components and 6.90033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.661709Jy sigma=0.004373 ! Fit after self-cal, rms=0.661143Jy sigma=0.004370 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.661143Jy sigma=0.004370 ! Fit after self-cal, rms=0.259380Jy sigma=0.001640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6969 mas, bmaj=1.168 mas, bpa=-8.13 degrees ! Estimated noise=1119.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0326371 Jy ! Component: 100 - total flux cleaned = -0.0523853 Jy ! Component: 150 - total flux cleaned = -0.0616414 Jy ! Component: 200 - total flux cleaned = -0.0677081 Jy ! Total flux subtracted in 200 components = -0.0677081 Jy ! Clean residual min=-0.021459 max=0.020140 Jy/beam ! Clean residual mean=0.000400 rms=0.004802 Jy/beam ! Combined flux in latest and established models = 6.83262 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 319 components and 6.83262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252550Jy sigma=0.001573 ! Fit after self-cal, rms=0.252207Jy sigma=0.001571 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0104766 Jy ! Component: 100 - total flux cleaned = -0.0157899 Jy ! Component: 150 - total flux cleaned = -0.0201047 Jy ! Component: 200 - total flux cleaned = -0.0229929 Jy ! Total flux subtracted in 200 components = -0.0229929 Jy ! Clean residual min=-0.018356 max=0.018554 Jy/beam ! Clean residual mean=0.000845 rms=0.004457 Jy/beam ! Combined flux in latest and established models = 6.80963 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 336 components and 6.80963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248979Jy sigma=0.001544 ! Fit after self-cal, rms=0.248826Jy sigma=0.001543 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248826Jy sigma=0.001543 ! Fit after self-cal, rms=0.245315Jy sigma=0.001531 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.28 mas, bmaj=3.973 mas, bpa=-4.922 degrees ! Estimated noise=1536.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0205012 Jy ! Component: 100 - total flux cleaned = -0.0343415 Jy ! Component: 150 - total flux cleaned = -0.0412511 Jy ! Component: 200 - total flux cleaned = -0.046471 Jy ! Total flux subtracted in 200 components = -0.046471 Jy ! Clean residual min=-0.016007 max=0.018865 Jy/beam ! Clean residual mean=0.001263 rms=0.006111 Jy/beam ! Combined flux in latest and established models = 6.76316 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 368 components and 6.76316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244526Jy sigma=0.001524 ! Fit after self-cal, rms=0.244421Jy sigma=0.001523 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00409071 Jy ! Component: 100 - total flux cleaned = -0.00741002 Jy ! Component: 150 - total flux cleaned = -0.0104112 Jy ! Component: 200 - total flux cleaned = -0.0125563 Jy ! Total flux subtracted in 200 components = -0.0125563 Jy ! Clean residual min=-0.016099 max=0.018735 Jy/beam ! Clean residual mean=0.001933 rms=0.005805 Jy/beam ! Combined flux in latest and established models = 6.7506 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 391 components and 6.7506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244131Jy sigma=0.001521 ! Fit after self-cal, rms=0.244073Jy sigma=0.001521 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6968 mas, bmaj=1.168 mas, bpa=-8.108 degrees ! Estimated noise=1119.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6968 x 1.168 at -8.108 degrees (North through East) ! Clean map min=-0.016708 max=5.2108 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244073Jy sigma=0.001521 ! Fit after self-cal, rms=0.218422Jy sigma=0.001294 ! Inverting map and beam ! Estimated beam: bmin=0.6967 mas, bmaj=1.168 mas, bpa=-8.074 degrees ! Estimated noise=1119.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0109352 Jy ! Component: 100 - total flux cleaned = -0.0159662 Jy ! Component: 150 - total flux cleaned = -0.0211687 Jy ! Component: 200 - total flux cleaned = -0.0260255 Jy ! Total flux subtracted in 200 components = -0.0260255 Jy ! Clean residual min=-0.017390 max=0.017124 Jy/beam ! Clean residual mean=0.000303 rms=0.003958 Jy/beam ! Combined flux in latest and established models = 6.72458 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 402 components and 6.72458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215238Jy sigma=0.001262 ! Fit after self-cal, rms=0.215140Jy sigma=0.001262 ! Inverting map ! Added new window around map position (1, 5.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415522 Jy ! Component: 100 - total flux cleaned = 0.000644491 Jy ! Component: 150 - total flux cleaned = -0.00312979 Jy ! Component: 200 - total flux cleaned = -0.00671958 Jy ! Total flux subtracted in 200 components = -0.00671958 Jy ! Clean residual min=-0.016194 max=0.016407 Jy/beam ! Clean residual mean=0.000430 rms=0.003746 Jy/beam ! Combined flux in latest and established models = 6.71786 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 426 components and 6.71786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212745Jy sigma=0.001240 ! Fit after self-cal, rms=0.212628Jy sigma=0.001239 ! Inverting map ! Added new window around map position (-2, 0.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469523 Jy ! Component: 100 - total flux cleaned = 0.00136548 Jy ! Component: 150 - total flux cleaned = -0.00174748 Jy ! Component: 200 - total flux cleaned = -0.00341375 Jy ! Total flux subtracted in 200 components = -0.00341375 Jy ! Clean residual min=-0.014465 max=0.014551 Jy/beam ! Clean residual mean=0.000510 rms=0.003497 Jy/beam ! Combined flux in latest and established models = 6.71444 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 440 components and 6.71444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210463Jy sigma=0.001219 ! Fit after self-cal, rms=0.210310Jy sigma=0.001218 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210310Jy sigma=0.001218 ! Fit after self-cal, rms=0.206819Jy sigma=0.001210 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5933 mas, bmaj=0.9976 mas, bpa=-12.01 degrees ! Estimated noise=1530.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.09381 Jy ! Component: 100 - total flux cleaned = 5.04037 Jy ! Component: 150 - total flux cleaned = 5.43898 Jy ! Component: 200 - total flux cleaned = 5.66584 Jy ! Total flux subtracted in 200 components = 5.66584 Jy ! Clean residual min=-0.106829 max=0.122324 Jy/beam ! Clean residual mean=0.002017 rms=0.017075 Jy/beam ! Combined flux in latest and established models = 5.66584 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 5.66584 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6966 mas, bmaj=1.167 mas, bpa=-8.056 degrees ! Estimated noise=1119.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18832 Jy ! Component: 100 - total flux cleaned = 0.309787 Jy ! Component: 150 - total flux cleaned = 0.399707 Jy ! Component: 200 - total flux cleaned = 0.441975 Jy ! Total flux subtracted in 200 components = 0.441975 Jy ! Clean residual min=-0.046691 max=0.060088 Jy/beam ! Clean residual mean=0.011662 rms=0.009441 Jy/beam ! Combined flux in latest and established models = 6.10782 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 48 components and 6.10782 Jy ! Inverting map ! Added new window around map position (3.9, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0354888 Jy ! Component: 100 - total flux cleaned = 0.0553483 Jy ! Component: 150 - total flux cleaned = 0.071179 Jy ! Component: 200 - total flux cleaned = 0.0879683 Jy ! Total flux subtracted in 200 components = 0.0879683 Jy ! Clean residual min=-0.036097 max=0.044067 Jy/beam ! Clean residual mean=0.009930 rms=0.007776 Jy/beam ! Combined flux in latest and established models = 6.19579 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 62 components and 6.19579 Jy ! Inverting map ! Added new window around map position (-2.1, -2.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215402 Jy ! Component: 100 - total flux cleaned = 0.0363032 Jy ! Component: 150 - total flux cleaned = 0.0501613 Jy ! Component: 200 - total flux cleaned = 0.0649135 Jy ! Total flux subtracted in 200 components = 0.0649135 Jy ! Clean residual min=-0.030218 max=0.033464 Jy/beam ! Clean residual mean=0.008644 rms=0.006691 Jy/beam ! Combined flux in latest and established models = 6.2607 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 82 components and 6.2607 Jy ! Inverting map ! Added new window around map position (-1.6, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200405 Jy ! Component: 100 - total flux cleaned = 0.0332219 Jy ! Component: 150 - total flux cleaned = 0.047106 Jy ! Component: 200 - total flux cleaned = 0.060229 Jy ! Total flux subtracted in 200 components = 0.060229 Jy ! Clean residual min=-0.025355 max=0.029142 Jy/beam ! Clean residual mean=0.007474 rms=0.005812 Jy/beam ! Combined flux in latest and established models = 6.32093 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 111 components and 6.32093 Jy ! Inverting map ! Added new window around map position (0.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203677 Jy ! Component: 100 - total flux cleaned = 0.0311409 Jy ! Component: 150 - total flux cleaned = 0.043714 Jy ! Component: 200 - total flux cleaned = 0.0556591 Jy ! Total flux subtracted in 200 components = 0.0556591 Jy ! Clean residual min=-0.021417 max=0.025750 Jy/beam ! Clean residual mean=0.006401 rms=0.005141 Jy/beam ! Combined flux in latest and established models = 6.37659 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 126 components and 6.37659 Jy ! Inverting map ! Added new window around map position (2.4, -23.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192556 Jy ! Component: 100 - total flux cleaned = 0.0302589 Jy ! Component: 150 - total flux cleaned = 0.0407864 Jy ! Component: 200 - total flux cleaned = 0.0516984 Jy ! Total flux subtracted in 200 components = 0.0516984 Jy ! Clean residual min=-0.018096 max=0.022781 Jy/beam ! Clean residual mean=0.005347 rms=0.004564 Jy/beam ! Combined flux in latest and established models = 6.42829 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 145 components and 6.42829 Jy ! Inverting map ! Added new window around map position (-8.5, -14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141434 Jy ! Component: 100 - total flux cleaned = 0.0233752 Jy ! Component: 150 - total flux cleaned = 0.0321685 Jy ! Component: 200 - total flux cleaned = 0.0405987 Jy ! Total flux subtracted in 200 components = 0.0405987 Jy ! Clean residual min=-0.014837 max=0.019245 Jy/beam ! Clean residual mean=0.004575 rms=0.004120 Jy/beam ! Combined flux in latest and established models = 6.46889 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 168 components and 6.46889 Jy ! Inverting map ! Added new window around map position (-4.5, -17.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177628 Jy ! Component: 100 - total flux cleaned = 0.0249194 Jy ! Component: 150 - total flux cleaned = 0.031095 Jy ! Component: 200 - total flux cleaned = 0.0389691 Jy ! Total flux subtracted in 200 components = 0.0389691 Jy ! Clean residual min=-0.012675 max=0.017711 Jy/beam ! Clean residual mean=0.003794 rms=0.003754 Jy/beam ! Combined flux in latest and established models = 6.50786 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 193 components and 6.50785 Jy ! Inverting map ! Added new window around map position (6, 14.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188289 Jy ! Component: 100 - total flux cleaned = 0.0262282 Jy ! Component: 150 - total flux cleaned = 0.0332472 Jy ! Component: 200 - total flux cleaned = 0.0388732 Jy ! Total flux subtracted in 200 components = 0.0388732 Jy ! Clean residual min=-0.010892 max=0.015211 Jy/beam ! Clean residual mean=0.003027 rms=0.003432 Jy/beam ! Combined flux in latest and established models = 6.54673 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 219 components and 6.54673 Jy ! Inverting map ! Added new window around map position (-15, 9.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117517 Jy ! Component: 100 - total flux cleaned = 0.0187435 Jy ! Component: 150 - total flux cleaned = 0.0238959 Jy ! Component: 200 - total flux cleaned = 0.0288545 Jy ! Total flux subtracted in 200 components = 0.0288545 Jy ! Clean residual min=-0.010126 max=0.014018 Jy/beam ! Clean residual mean=0.002518 rms=0.003194 Jy/beam ! Combined flux in latest and established models = 6.57558 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 241 components and 6.57558 Jy ! Inverting map ! Added new window around map position (23.1, -19.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115337 Jy ! Component: 100 - total flux cleaned = 0.0177269 Jy ! Component: 150 - total flux cleaned = 0.0222817 Jy ! Component: 200 - total flux cleaned = 0.0271123 Jy ! Total flux subtracted in 200 components = 0.0271123 Jy ! Clean residual min=-0.009184 max=0.012463 Jy/beam ! Clean residual mean=0.002093 rms=0.003004 Jy/beam ! Combined flux in latest and established models = 6.60269 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 259 components and 6.60269 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.28 mas, bmaj=3.972 mas, bpa=-4.9 degrees ! Estimated noise=1536.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184751 Jy ! Component: 100 - total flux cleaned = 0.0323716 Jy ! Component: 150 - total flux cleaned = 0.043968 Jy ! Component: 200 - total flux cleaned = 0.0532291 Jy ! Total flux subtracted in 200 components = 0.0532291 Jy ! Clean residual min=-0.008468 max=0.014107 Jy/beam ! Clean residual mean=0.002873 rms=0.003871 Jy/beam ! Combined flux in latest and established models = 6.65592 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00674139 Jy ! Component: 100 - total flux cleaned = 0.0121376 Jy ! Component: 150 - total flux cleaned = 0.0169955 Jy ! Component: 200 - total flux cleaned = 0.0206175 Jy ! Total flux subtracted in 200 components = 0.0206175 Jy ! Clean residual min=-0.008352 max=0.012011 Jy/beam ! Clean residual mean=0.001841 rms=0.003576 Jy/beam ! Combined flux in latest and established models = 6.67654 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 338 components and 6.67654 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6966 mas, bmaj=1.167 mas, bpa=-8.056 degrees ! Estimated noise=1119.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00333165 Jy ! Component: 100 - total flux cleaned = -0.00453414 Jy ! Component: 150 - total flux cleaned = -0.00491271 Jy ! Component: 200 - total flux cleaned = -0.0049174 Jy ! Total flux subtracted in 200 components = -0.0049174 Jy ! Clean residual min=-0.009691 max=0.010844 Jy/beam ! Clean residual mean=0.000776 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 6.67162 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 357 components and 6.67162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204455Jy sigma=0.001156 ! Fit after self-cal, rms=0.202725Jy sigma=0.001144 wmodel J0730-1141_X_2009_05_13_pus_map.mod ! Writing 357 model components to file: J0730-1141_X_2009_05_13_pus_map.mod wobs J0730-1141_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0730-1141_X_2009_05_13_pus_uvs.fits wwins J0730-1141_X_2009_05_13_pus_map.win ! wwins: Wrote 24 windows to J0730-1141_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499538 Jy ! Component: 100 - total flux cleaned = 0.00946014 Jy ! Component: 150 - total flux cleaned = 0.0130035 Jy ! Component: 200 - total flux cleaned = 0.0155661 Jy ! Component: 250 - total flux cleaned = 0.0178815 Jy ! Component: 300 - total flux cleaned = 0.0199705 Jy ! Component: 350 - total flux cleaned = 0.021539 Jy ! Component: 400 - total flux cleaned = 0.0229195 Jy ! Component: 450 - total flux cleaned = 0.0238215 Jy ! Component: 500 - total flux cleaned = 0.0250023 Jy ! Component: 550 - total flux cleaned = 0.025727 Jy ! Component: 600 - total flux cleaned = 0.0268706 Jy ! Component: 650 - total flux cleaned = 0.0275718 Jy ! Component: 700 - total flux cleaned = 0.0284033 Jy ! Component: 750 - total flux cleaned = 0.02895 Jy ! Component: 800 - total flux cleaned = 0.0297592 Jy ! Component: 850 - total flux cleaned = 0.0304252 Jy ! Component: 900 - total flux cleaned = 0.0308208 Jy ! Component: 950 - total flux cleaned = 0.0314733 Jy ! Component: 1000 - total flux cleaned = 0.0321192 Jy ! Component: 1050 - total flux cleaned = 0.0323756 Jy ! Component: 1100 - total flux cleaned = 0.0330107 Jy ! Component: 1150 - total flux cleaned = 0.033514 Jy ! Component: 1200 - total flux cleaned = 0.0338887 Jy ! Component: 1250 - total flux cleaned = 0.034506 Jy ! Component: 1300 - total flux cleaned = 0.0348734 Jy ! Component: 1350 - total flux cleaned = 0.0352385 Jy ! Component: 1400 - total flux cleaned = 0.0357201 Jy ! Component: 1450 - total flux cleaned = 0.0360789 Jy ! Component: 1500 - total flux cleaned = 0.0361981 Jy ! Component: 1550 - total flux cleaned = 0.0365514 Jy ! Component: 1600 - total flux cleaned = 0.0369018 Jy ! Component: 1650 - total flux cleaned = 0.0374798 Jy ! Component: 1700 - total flux cleaned = 0.0378233 Jy ! Component: 1750 - total flux cleaned = 0.0381648 Jy ! Component: 1800 - total flux cleaned = 0.038616 Jy ! Component: 1850 - total flux cleaned = 0.0387279 Jy ! Component: 1900 - total flux cleaned = 0.0391737 Jy ! Component: 1950 - total flux cleaned = 0.0393947 Jy ! Component: 2000 - total flux cleaned = 0.0397244 Jy ! Component: 2050 - total flux cleaned = 0.0400521 Jy ! Component: 2100 - total flux cleaned = 0.0404859 Jy ! Component: 2150 - total flux cleaned = 0.0408085 Jy ! Component: 2200 - total flux cleaned = 0.0409161 Jy ! Component: 2250 - total flux cleaned = 0.0414477 Jy ! Component: 2300 - total flux cleaned = 0.0415523 Jy ! Component: 2350 - total flux cleaned = 0.0417626 Jy ! Component: 2400 - total flux cleaned = 0.04218 Jy ! Component: 2450 - total flux cleaned = 0.0422836 Jy ! Component: 2500 - total flux cleaned = 0.0427979 Jy ! Component: 2550 - total flux cleaned = 0.0429001 Jy ! Component: 2600 - total flux cleaned = 0.043002 Jy ! Component: 2650 - total flux cleaned = 0.0432048 Jy ! Component: 2700 - total flux cleaned = 0.0436068 Jy ! Component: 2750 - total flux cleaned = 0.0437072 Jy ! Component: 2800 - total flux cleaned = 0.0441046 Jy ! Component: 2850 - total flux cleaned = 0.0444003 Jy ! Component: 2900 - total flux cleaned = 0.0444981 Jy ! Component: 2950 - total flux cleaned = 0.0447909 Jy ! Component: 3000 - total flux cleaned = 0.0449851 Jy ! Component: 3050 - total flux cleaned = 0.0453708 Jy ! Component: 3100 - total flux cleaned = 0.0453706 Jy ! Component: 3150 - total flux cleaned = 0.0456572 Jy ! Component: 3200 - total flux cleaned = 0.045942 Jy ! Component: 3250 - total flux cleaned = 0.0462246 Jy ! Component: 3300 - total flux cleaned = 0.0464127 Jy ! Component: 3350 - total flux cleaned = 0.0465993 Jy ! Component: 3400 - total flux cleaned = 0.046878 Jy ! Component: 3450 - total flux cleaned = 0.0471548 Jy ! Component: 3500 - total flux cleaned = 0.0474296 Jy ! Component: 3550 - total flux cleaned = 0.0476119 Jy ! Component: 3600 - total flux cleaned = 0.0477928 Jy ! Component: 3650 - total flux cleaned = 0.0479736 Jy ! Component: 3700 - total flux cleaned = 0.0482438 Jy ! Component: 3750 - total flux cleaned = 0.0485118 Jy ! Component: 3800 - total flux cleaned = 0.0486896 Jy ! Component: 3850 - total flux cleaned = 0.0490436 Jy ! Component: 3900 - total flux cleaned = 0.0492196 Jy ! Component: 3950 - total flux cleaned = 0.0493947 Jy ! Component: 4000 - total flux cleaned = 0.0496564 Jy ! Component: 4050 - total flux cleaned = 0.0498301 Jy ! Total flux subtracted in 4096 components = 0.050089 Jy ! Clean residual min=-0.004587 max=0.005103 Jy/beam ! Clean residual mean=0.000091 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 6.72171 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 656 components and 6.72171 Jy ![Exited script file: muppet] wmap "J0730-1141_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6966 x 1.167 at -8.056 degrees (North through East) ! Clean map min=-0.0072449 max=5.2353 Jy/beam ! Writing clean map to FITS file: J0730-1141_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 5.23532 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00156227 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0895232 0.0895232 0.179046 0.358093 0.716185 1.43237 2.86474 5.72948 11.459 22.9179 45.8359 91.6717 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(1000*peak_flux)/1000 ! peak= 5.235 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6966 x 1.167 at -8.056 degrees (North through East) ! Clean map min=-0.0072449 max=5.2353 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0730-1141_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:40:34 2017