! Started logfile: J0609-1542_S_2009_05_13_pus_uvs.log on Sun Jan 22 11:34:08 2017 obs J0609-1542_S_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0609-1542_S_2009_05_13_pus_uva.fits ! AN table 1: 31 integrations on 120 of 120 possible baselines. ! AN table 2: 9 integrations on 120 of 120 possible baselines. ! AN table 3: 16 integrations on 120 of 120 possible baselines. ! AN table 4: 12 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.214461 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0609-1542 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1341 lines of history. ! ! Reading 7000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0609-1542_S_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 293 telescope corrections were flagged in sub-array 1. ! A total of 144 telescope corrections were flagged in sub-array 2. ! A total of 112 telescope corrections were flagged in sub-array 3. ! A total of 100 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 293 telescope corrections were flagged in sub-array 1. ! A total of 144 telescope corrections were flagged in sub-array 2. ! A total of 112 telescope corrections were flagged in sub-array 3. ! A total of 100 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 293 telescope corrections were flagged in sub-array 1. ! A total of 144 telescope corrections were flagged in sub-array 2. ! A total of 112 telescope corrections were flagged in sub-array 3. ! A total of 100 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 293 telescope corrections were flagged in sub-array 1. ! A total of 144 telescope corrections were flagged in sub-array 2. ! A total of 112 telescope corrections were flagged in sub-array 3. ! A total of 100 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.767324Jy sigma=0.012627 ! Fit after self-cal, rms=1.741501Jy sigma=0.012521 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.063 mas, bmaj=3.726 mas, bpa=-21.78 degrees ! Estimated noise=1759.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.90093 Jy ! Component: 100 - total flux cleaned = 2.4708 Jy ! Total flux subtracted in 100 components = 2.4708 Jy ! Clean residual min=-0.058556 max=0.243348 Jy/beam ! Clean residual mean=0.001309 rms=0.019626 Jy/beam ! Combined flux in latest and established models = 2.4708 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.4708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.591179Jy sigma=0.004229 ! Fit after self-cal, rms=0.591245Jy sigma=0.004229 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.262899 Jy ! Component: 100 - total flux cleaned = 0.399477 Jy ! Total flux subtracted in 100 components = 0.399477 Jy ! Clean residual min=-0.039917 max=0.089047 Jy/beam ! Clean residual mean=0.000784 rms=0.012475 Jy/beam ! Combined flux in latest and established models = 2.87028 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 2.87027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410780Jy sigma=0.002829 ! Fit after self-cal, rms=0.410681Jy sigma=0.002828 ! Inverting map ! Added new window around map position (13.5, 11). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0966096 Jy ! Component: 100 - total flux cleaned = 0.164624 Jy ! Total flux subtracted in 100 components = 0.164624 Jy ! Clean residual min=-0.038321 max=0.075512 Jy/beam ! Clean residual mean=0.000549 rms=0.010847 Jy/beam ! Combined flux in latest and established models = 3.0349 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 3.0349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.368705Jy sigma=0.002454 ! Fit after self-cal, rms=0.365772Jy sigma=0.002440 ! Inverting map ! Added new window around map position (6.5, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0811613 Jy ! Component: 100 - total flux cleaned = 0.138191 Jy ! Total flux subtracted in 100 components = 0.138191 Jy ! Clean residual min=-0.033526 max=0.056303 Jy/beam ! Clean residual mean=0.000353 rms=0.009278 Jy/beam ! Combined flux in latest and established models = 3.17309 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 56 components and 3.17309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334259Jy sigma=0.002155 ! Fit after self-cal, rms=0.331401Jy sigma=0.002137 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=4.642 mas, bpa=-15.08 degrees ! Estimated noise=1290.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0993619 Jy ! Component: 100 - total flux cleaned = 0.164837 Jy ! Component: 150 - total flux cleaned = 0.210673 Jy ! Component: 200 - total flux cleaned = 0.243119 Jy ! Total flux subtracted in 200 components = 0.243119 Jy ! Clean residual min=-0.031663 max=0.054940 Jy/beam ! Clean residual mean=-0.000016 rms=0.009108 Jy/beam ! Combined flux in latest and established models = 3.41621 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 88 components and 3.41621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300088Jy sigma=0.001830 ! Fit after self-cal, rms=0.294282Jy sigma=0.001785 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.12 HO 0.95 ! KK 1.00 KP 1.01 LA 0.96 MK 1.02 ! NL 1.18 NY 1.00* OV 1.01 PT 0.99 ! SC 1.01 TS 0.98 WZ 1.00* KB 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.98 HN 1.04 HO 1.00* ! KK 1.01 KP 1.06 LA 0.97 MK 1.04 ! NL 1.03 NY 1.00* OV 1.04 PT 0.99 ! SC 1.01 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.99 HN 1.11 HO 1.00* ! KK 1.00* KP 1.03 LA 1.02 MK 1.00* ! NL 1.01 NY 1.00* OV 1.00* PT 1.00 ! SC 1.00 TS 1.00* WZ 1.05 KB 1.00* ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.08 HO 1.03 ! KK 1.03 KP 1.01 LA 0.99 MK 1.02 ! NL 1.09 NY 1.00* OV 1.01 PT 0.99 ! SC 1.04 TS 0.97 WZ 1.00* KB 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 1.01 HO 1.00* ! KK 1.05 KP 1.02 LA 0.99 MK 1.02 ! NL 1.04 NY 1.00* OV 1.03 PT 0.98 ! SC 1.04 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.95 HN 1.05 HO 1.00* ! KK 1.00* KP 1.07 LA 1.04 MK 1.00* ! NL 1.03 NY 1.00* OV 1.00* PT 1.01 ! SC 1.04 TS 1.00* WZ 1.02 KB 1.00* ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 1.06 HO 0.99 ! KK 0.97 KP 1.00 LA 0.96 MK 0.99 ! NL 1.08 NY 1.00* OV 1.05 PT 0.98 ! SC 1.00 TS 1.00 WZ 1.00* KB 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.94 HN 0.97 HO 1.00* ! KK 0.99 KP 1.01 LA 0.98 MK 1.00 ! NL 0.99 NY 1.00* OV 1.05 PT 0.97 ! SC 0.99 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.95 HN 1.05 HO 1.00* ! KK 1.00* KP 1.06 LA 1.03 MK 1.00* ! NL 0.98 NY 1.00* OV 1.00* PT 0.97 ! SC 0.99 TS 1.00* WZ 0.99 KB 1.00* ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.98 HN 1.02 HO 0.93 ! KK 1.01 KP 0.95 LA 0.97 MK 0.97 ! NL 0.98 NY 1.00* OV 0.99 PT 0.97 ! SC 0.97 TS 1.01 WZ 1.00* KB 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 0.97 HN 0.93 HO 1.00* ! KK 1.02 KP 0.96 LA 0.97 MK 0.97 ! NL 0.99 NY 1.00* OV 0.99 PT 0.98 ! SC 0.96 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.98 HN 1.00 HO 1.00* ! KK 1.00* KP 1.02 LA 0.97 MK 1.00* ! NL 0.98 NY 1.00* OV 1.00* PT 0.99 ! SC 0.95 TS 1.00* WZ 0.99 KB 1.00* ! ! ! Fit before self-cal, rms=0.294282Jy sigma=0.001785 ! Fit after self-cal, rms=0.216007Jy sigma=0.001258 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=4.856 mas, bpa=-14.67 degrees ! Estimated noise=1294.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390781 Jy ! Component: 100 - total flux cleaned = 0.0602474 Jy ! Component: 150 - total flux cleaned = 0.0689371 Jy ! Component: 200 - total flux cleaned = 0.0741216 Jy ! Total flux subtracted in 200 components = 0.0741216 Jy ! Clean residual min=-0.012263 max=0.015653 Jy/beam ! Clean residual mean=0.000148 rms=0.003175 Jy/beam ! Combined flux in latest and established models = 3.49033 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 120 components and 3.49033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209357Jy sigma=0.001191 ! Fit after self-cal, rms=0.208603Jy sigma=0.001186 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208603Jy sigma=0.001186 ! Fit after self-cal, rms=0.205166Jy sigma=0.001171 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=4.86 mas, bpa=-14.66 degrees ! Estimated noise=1294.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142424 Jy ! Component: 100 - total flux cleaned = 0.0182773 Jy ! Component: 150 - total flux cleaned = 0.0199043 Jy ! Component: 200 - total flux cleaned = 0.0204438 Jy ! Total flux subtracted in 200 components = 0.0204438 Jy ! Clean residual min=-0.009604 max=0.012055 Jy/beam ! Clean residual mean=0.000123 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 3.51077 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 132 components and 3.51077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203470Jy sigma=0.001158 ! Fit after self-cal, rms=0.203194Jy sigma=0.001156 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103891 Jy ! Component: 100 - total flux cleaned = 0.0114019 Jy ! Component: 150 - total flux cleaned = 0.0116909 Jy ! Component: 200 - total flux cleaned = 0.0114539 Jy ! Total flux subtracted in 200 components = 0.0114539 Jy ! Clean residual min=-0.008840 max=0.010792 Jy/beam ! Clean residual mean=0.000060 rms=0.002286 Jy/beam ! Combined flux in latest and established models = 3.52223 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 144 components and 3.52223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202043Jy sigma=0.001148 ! Fit after self-cal, rms=0.201927Jy sigma=0.001147 ! Inverting map ! Added new window around map position (23, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00886616 Jy ! Component: 100 - total flux cleaned = 0.0125698 Jy ! Component: 150 - total flux cleaned = 0.0130615 Jy ! Component: 200 - total flux cleaned = 0.0132787 Jy ! Total flux subtracted in 200 components = 0.0132787 Jy ! Clean residual min=-0.008460 max=0.009700 Jy/beam ! Clean residual mean=-0.000008 rms=0.002102 Jy/beam ! Combined flux in latest and established models = 3.53551 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 160 components and 3.53551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201095Jy sigma=0.001142 ! Fit after self-cal, rms=0.201040Jy sigma=0.001141 ! Inverting map ! Added new window around map position (59.5, -60). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719626 Jy ! Component: 100 - total flux cleaned = 0.00915666 Jy ! Component: 150 - total flux cleaned = 0.00934646 Jy ! Component: 200 - total flux cleaned = 0.0095226 Jy ! Total flux subtracted in 200 components = 0.0095226 Jy ! Clean residual min=-0.008007 max=0.009004 Jy/beam ! Clean residual mean=-0.000046 rms=0.002016 Jy/beam ! Combined flux in latest and established models = 3.54503 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 175 components and 3.54503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200430Jy sigma=0.001138 ! Fit after self-cal, rms=0.200388Jy sigma=0.001138 ! Inverting map ! Added new window around map position (47, -104.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409918 Jy ! Component: 100 - total flux cleaned = 0.00535749 Jy ! Component: 150 - total flux cleaned = 0.00629833 Jy ! Component: 200 - total flux cleaned = 0.00664462 Jy ! Total flux subtracted in 200 components = 0.00664462 Jy ! Clean residual min=-0.007878 max=0.007935 Jy/beam ! Clean residual mean=-0.000068 rms=0.001934 Jy/beam ! Combined flux in latest and established models = 3.55167 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 188 components and 3.55168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199837Jy sigma=0.001135 ! Fit after self-cal, rms=0.199811Jy sigma=0.001135 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199811Jy sigma=0.001135 ! Fit after self-cal, rms=0.199294Jy sigma=0.001130 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=4.857 mas, bpa=-14.63 degrees ! Estimated noise=1294.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276785 Jy ! Component: 100 - total flux cleaned = 0.00358065 Jy ! Component: 150 - total flux cleaned = 0.00486119 Jy ! Component: 200 - total flux cleaned = 0.00568989 Jy ! Total flux subtracted in 200 components = 0.00568989 Jy ! Clean residual min=-0.007333 max=0.006665 Jy/beam ! Clean residual mean=0.000113 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 3.55737 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 197 components and 3.55736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198859Jy sigma=0.001128 ! Fit after self-cal, rms=0.198827Jy sigma=0.001128 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154294 Jy ! Component: 100 - total flux cleaned = 0.00138756 Jy ! Component: 150 - total flux cleaned = 0.00153257 Jy ! Component: 200 - total flux cleaned = 0.00138982 Jy ! Total flux subtracted in 200 components = 0.00138982 Jy ! Clean residual min=-0.007259 max=0.006661 Jy/beam ! Clean residual mean=0.000105 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 3.55875 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 203 components and 3.55875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198575Jy sigma=0.001126 ! Fit after self-cal, rms=0.198560Jy sigma=0.001126 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198560Jy sigma=0.001126 ! Fit after self-cal, rms=0.198517Jy sigma=0.001126 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.807 mas, bmaj=14.57 mas, bpa=1.837 degrees ! Estimated noise=1671.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467196 Jy ! Component: 100 - total flux cleaned = 0.00545223 Jy ! Component: 150 - total flux cleaned = 0.00545016 Jy ! Component: 200 - total flux cleaned = 0.00534053 Jy ! Total flux subtracted in 200 components = 0.00534053 Jy ! Clean residual min=-0.006732 max=0.007252 Jy/beam ! Clean residual mean=0.000237 rms=0.001996 Jy/beam ! Combined flux in latest and established models = 3.5641 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 214 components and 3.5641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198415Jy sigma=0.001125 ! Fit after self-cal, rms=0.198386Jy sigma=0.001125 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132015 Jy ! Component: 100 - total flux cleaned = 0.000789922 Jy ! Component: 150 - total flux cleaned = 0.000412204 Jy ! Component: 200 - total flux cleaned = -2.00749e-05 Jy ! Total flux subtracted in 200 components = -2.00749e-05 Jy ! Clean residual min=-0.006437 max=0.007069 Jy/beam ! Clean residual mean=0.000232 rms=0.001952 Jy/beam ! Combined flux in latest and established models = 3.56408 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 223 components and 3.56407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198343Jy sigma=0.001124 ! Fit after self-cal, rms=0.198329Jy sigma=0.001124 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=4.855 mas, bpa=-14.62 degrees ! Estimated noise=1294.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.606 x 4.855 at -14.62 degrees (North through East) ! Clean map min=-0.0069395 max=2.4895 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198329Jy sigma=0.001124 ! Fit after self-cal, rms=0.186355Jy sigma=0.001042 ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=4.855 mas, bpa=-14.61 degrees ! Estimated noise=1294.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102521 Jy ! Component: 100 - total flux cleaned = 4.77085e-05 Jy ! Component: 150 - total flux cleaned = -0.000221833 Jy ! Component: 200 - total flux cleaned = -0.000599656 Jy ! Total flux subtracted in 200 components = -0.000599656 Jy ! Clean residual min=-0.006973 max=0.005978 Jy/beam ! Clean residual mean=0.000102 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 3.56348 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 237 components and 3.56347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186105Jy sigma=0.001041 ! Fit after self-cal, rms=0.186094Jy sigma=0.001041 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.22869e-05 Jy ! Component: 100 - total flux cleaned = -0.00010385 Jy ! Component: 150 - total flux cleaned = -0.00044425 Jy ! Component: 200 - total flux cleaned = -0.000661125 Jy ! Total flux subtracted in 200 components = -0.000661125 Jy ! Clean residual min=-0.006908 max=0.005921 Jy/beam ! Clean residual mean=0.000105 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 3.56281 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 245 components and 3.56281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185930Jy sigma=0.001040 ! Fit after self-cal, rms=0.185925Jy sigma=0.001040 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185925Jy sigma=0.001040 ! Fit after self-cal, rms=0.185905Jy sigma=0.001040 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.055 mas, bmaj=3.914 mas, bpa=-21.08 degrees ! Estimated noise=1764.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.90096 Jy ! Component: 100 - total flux cleaned = 2.46405 Jy ! Component: 150 - total flux cleaned = 2.7222 Jy ! Component: 200 - total flux cleaned = 2.88396 Jy ! Total flux subtracted in 200 components = 2.88396 Jy ! Clean residual min=-0.031451 max=0.090673 Jy/beam ! Clean residual mean=0.000974 rms=0.010629 Jy/beam ! Combined flux in latest and established models = 2.88396 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 2.88396 Jy ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=4.853 mas, bpa=-14.61 degrees ! Estimated noise=1294.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.194907 Jy ! Component: 100 - total flux cleaned = 0.324639 Jy ! Component: 150 - total flux cleaned = 0.414367 Jy ! Component: 200 - total flux cleaned = 0.477728 Jy ! Total flux subtracted in 200 components = 0.477728 Jy ! Clean residual min=-0.013535 max=0.037121 Jy/beam ! Clean residual mean=0.001148 rms=0.005482 Jy/beam ! Combined flux in latest and established models = 3.36169 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 79 components and 3.36169 Jy ! Inverting map ! Added new window around map position (9.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0456967 Jy ! Component: 100 - total flux cleaned = 0.078921 Jy ! Component: 150 - total flux cleaned = 0.103506 Jy ! Component: 200 - total flux cleaned = 0.122217 Jy ! Total flux subtracted in 200 components = 0.122217 Jy ! Clean residual min=-0.008061 max=0.013077 Jy/beam ! Clean residual mean=0.000491 rms=0.002466 Jy/beam ! Combined flux in latest and established models = 3.4839 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 111 components and 3.4839 Jy ! Inverting map ! Added new window around map position (-3.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152696 Jy ! Component: 100 - total flux cleaned = 0.0274843 Jy ! Component: 150 - total flux cleaned = 0.0377396 Jy ! Component: 200 - total flux cleaned = 0.0463696 Jy ! Total flux subtracted in 200 components = 0.0463696 Jy ! Clean residual min=-0.006770 max=0.007930 Jy/beam ! Clean residual mean=0.000256 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 3.53027 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 132 components and 3.53027 Jy ! Inverting map ! Added new window around map position (16.5, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00826726 Jy ! Component: 100 - total flux cleaned = 0.0131113 Jy ! Component: 150 - total flux cleaned = 0.016024 Jy ! Component: 200 - total flux cleaned = 0.01828 Jy ! Total flux subtracted in 200 components = 0.01828 Jy ! Clean residual min=-0.006744 max=0.007160 Jy/beam ! Clean residual mean=0.000167 rms=0.001668 Jy/beam ! Combined flux in latest and established models = 3.54855 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 154 components and 3.54855 Jy ! Inverting map ! Added new window around map position (-116.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005006 Jy ! Component: 100 - total flux cleaned = 0.00723764 Jy ! Component: 150 - total flux cleaned = 0.00819524 Jy ! Component: 200 - total flux cleaned = 0.00911414 Jy ! Total flux subtracted in 200 components = 0.00911414 Jy ! Clean residual min=-0.007146 max=0.006228 Jy/beam ! Clean residual mean=0.000143 rms=0.001592 Jy/beam ! Combined flux in latest and established models = 3.55767 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 169 components and 3.55767 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.807 mas, bmaj=14.57 mas, bpa=1.864 degrees ! Estimated noise=1672.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480105 Jy ! Component: 100 - total flux cleaned = 0.00681776 Jy ! Component: 150 - total flux cleaned = 0.00729254 Jy ! Component: 200 - total flux cleaned = 0.00760962 Jy ! Total flux subtracted in 200 components = 0.00760962 Jy ! Clean residual min=-0.007385 max=0.006524 Jy/beam ! Clean residual mean=0.000233 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 3.56528 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019562 Jy ! Component: 100 - total flux cleaned = 0.000378874 Jy ! Component: 150 - total flux cleaned = 0.000635566 Jy ! Component: 200 - total flux cleaned = 0.000796353 Jy ! Total flux subtracted in 200 components = 0.000796353 Jy ! Clean residual min=-0.007414 max=0.006341 Jy/beam ! Clean residual mean=0.000222 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 3.56607 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 212 components and 3.56607 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=4.853 mas, bpa=-14.61 degrees ! Estimated noise=1294.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000531956 Jy ! Component: 100 - total flux cleaned = -0.00102011 Jy ! Component: 150 - total flux cleaned = -0.00102328 Jy ! Component: 200 - total flux cleaned = -0.00102465 Jy ! Total flux subtracted in 200 components = -0.00102465 Jy ! Clean residual min=-0.006824 max=0.006103 Jy/beam ! Clean residual mean=0.000100 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 3.56505 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 225 components and 3.56505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186171Jy sigma=0.001040 ! Fit after self-cal, rms=0.185894Jy sigma=0.001038 wmodel J0609-1542_S_2009_05_13_pus_map.mod ! Writing 225 model components to file: J0609-1542_S_2009_05_13_pus_map.mod wobs J0609-1542_S_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0609-1542_S_2009_05_13_pus_uvs.fits wwins J0609-1542_S_2009_05_13_pus_map.win ! wwins: Wrote 12 windows to J0609-1542_S_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177508 Jy ! Component: 100 - total flux cleaned = -0.00231289 Jy ! Component: 150 - total flux cleaned = -0.00262421 Jy ! Component: 200 - total flux cleaned = -0.00262451 Jy ! Component: 250 - total flux cleaned = -0.0026267 Jy ! Component: 300 - total flux cleaned = -0.00253289 Jy ! Component: 350 - total flux cleaned = -0.00225224 Jy ! Component: 400 - total flux cleaned = -0.00206625 Jy ! Component: 450 - total flux cleaned = -0.00169932 Jy ! Component: 500 - total flux cleaned = -0.00115728 Jy ! Component: 550 - total flux cleaned = -0.000536501 Jy ! Component: 600 - total flux cleaned = -9.81544e-05 Jy ! Component: 650 - total flux cleaned = 7.48703e-05 Jy ! Component: 700 - total flux cleaned = 0.000504096 Jy ! Component: 750 - total flux cleaned = 0.000843597 Jy ! Component: 800 - total flux cleaned = 0.00101057 Jy ! Component: 850 - total flux cleaned = 0.00142508 Jy ! Component: 900 - total flux cleaned = 0.00158879 Jy ! Component: 950 - total flux cleaned = 0.0018324 Jy ! Component: 1000 - total flux cleaned = 0.0022351 Jy ! Component: 1050 - total flux cleaned = 0.00255347 Jy ! Component: 1100 - total flux cleaned = 0.00278955 Jy ! Component: 1150 - total flux cleaned = 0.00318045 Jy ! Component: 1200 - total flux cleaned = 0.00349064 Jy ! Component: 1250 - total flux cleaned = 0.00356727 Jy ! Component: 1300 - total flux cleaned = 0.00379625 Jy ! Component: 1350 - total flux cleaned = 0.00409905 Jy ! Component: 1400 - total flux cleaned = 0.00454816 Jy ! Component: 1450 - total flux cleaned = 0.0046966 Jy ! Component: 1500 - total flux cleaned = 0.00506323 Jy ! Component: 1550 - total flux cleaned = 0.00520857 Jy ! Component: 1600 - total flux cleaned = 0.00528052 Jy ! Component: 1650 - total flux cleaned = 0.00556763 Jy ! Component: 1700 - total flux cleaned = 0.00592334 Jy ! Component: 1750 - total flux cleaned = 0.00585268 Jy ! Component: 1800 - total flux cleaned = 0.00620288 Jy ! Component: 1850 - total flux cleaned = 0.00613392 Jy ! Component: 1900 - total flux cleaned = 0.00661797 Jy ! Component: 1950 - total flux cleaned = 0.00668625 Jy ! Component: 2000 - total flux cleaned = 0.00689034 Jy ! Component: 2050 - total flux cleaned = 0.00689097 Jy ! Component: 2100 - total flux cleaned = 0.00729357 Jy ! Component: 2150 - total flux cleaned = 0.00749216 Jy ! Component: 2200 - total flux cleaned = 0.00749182 Jy ! Component: 2250 - total flux cleaned = 0.00762281 Jy ! Component: 2300 - total flux cleaned = 0.00788386 Jy ! Component: 2350 - total flux cleaned = 0.00788435 Jy ! Component: 2400 - total flux cleaned = 0.0082703 Jy ! Component: 2450 - total flux cleaned = 0.00801474 Jy ! Component: 2500 - total flux cleaned = 0.00852293 Jy ! Component: 2550 - total flux cleaned = 0.00846015 Jy ! Component: 2600 - total flux cleaned = 0.00852304 Jy ! Component: 2650 - total flux cleaned = 0.00877213 Jy ! Component: 2700 - total flux cleaned = 0.00901997 Jy ! Component: 2750 - total flux cleaned = 0.00902009 Jy ! Component: 2800 - total flux cleaned = 0.00908089 Jy ! Component: 2850 - total flux cleaned = 0.0092632 Jy ! Component: 2900 - total flux cleaned = 0.00950504 Jy ! Component: 2950 - total flux cleaned = 0.00950473 Jy ! Component: 3000 - total flux cleaned = 0.0095639 Jy ! Component: 3050 - total flux cleaned = 0.00956362 Jy ! Component: 3100 - total flux cleaned = 0.00968219 Jy ! Component: 3150 - total flux cleaned = 0.00985845 Jy ! Component: 3200 - total flux cleaned = 0.00985849 Jy ! Component: 3250 - total flux cleaned = 0.0099751 Jy ! Component: 3300 - total flux cleaned = 0.0100332 Jy ! Component: 3350 - total flux cleaned = 0.0101481 Jy ! Component: 3400 - total flux cleaned = 0.0102055 Jy ! Component: 3450 - total flux cleaned = 0.0102626 Jy ! Component: 3500 - total flux cleaned = 0.0104329 Jy ! Component: 3550 - total flux cleaned = 0.010489 Jy ! Component: 3600 - total flux cleaned = 0.0104329 Jy ! Component: 3650 - total flux cleaned = 0.0105449 Jy ! Component: 3700 - total flux cleaned = 0.010767 Jy ! Component: 3750 - total flux cleaned = 0.0107114 Jy ! Component: 3800 - total flux cleaned = 0.0106564 Jy ! Component: 3850 - total flux cleaned = 0.0108206 Jy ! Component: 3900 - total flux cleaned = 0.0110928 Jy ! Component: 3950 - total flux cleaned = 0.0110932 Jy ! Component: 4000 - total flux cleaned = 0.0113087 Jy ! Component: 4050 - total flux cleaned = 0.0113086 Jy ! Total flux subtracted in 4096 components = 0.0114153 Jy ! Clean residual min=-0.004050 max=0.003177 Jy/beam ! Clean residual mean=0.000047 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 3.57646 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 524 components and 3.57646 Jy ![Exited script file: muppet] wmap "J0609-1542_S_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.607 x 4.853 at -14.61 degrees (North through East) ! Clean map min=-0.0064617 max=2.4804 Jy/beam ! Writing clean map to FITS file: J0609-1542_S_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.48035 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000918553 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.111099 0.111099 0.222199 0.444398 0.888795 1.77759 3.55518 7.11036 14.2207 28.4414 56.8829 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.48 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.607 x 4.853 at -14.61 degrees (North through East) ! Clean map min=-0.0064617 max=2.4804 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0609-1542_S_2009_05_13_pus_uvs.log closed on Sun Jan 22 11:34:14 2017