! Started logfile: J0424-3848_S_2009_05_13_pus_uvs.log on Sun Jan 22 11:33:04 2017 obs J0424-3848_S_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0424-3848_S_2009_05_13_pus_uva.fits ! AN table 1: 95 integrations on 120 of 120 possible baselines. ! AN table 2: 93 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.199645 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0424-3848 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1341 lines of history. ! ! Reading 18016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0424-3848_S_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 771 telescope corrections were flagged in sub-array 1. ! A total of 842 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 771 telescope corrections were flagged in sub-array 1. ! A total of 842 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 771 telescope corrections were flagged in sub-array 1. ! A total of 842 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 771 telescope corrections were flagged in sub-array 1. ! A total of 842 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.977828Jy sigma=0.005520 ! Fit after self-cal, rms=0.880696Jy sigma=0.005037 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.712 mas, bmaj=4.142 mas, bpa=-34.53 degrees ! Estimated noise=2276.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103874 Jy ! Component: 100 - total flux cleaned = 0.130957 Jy ! Total flux subtracted in 100 components = 0.130957 Jy ! Clean residual min=-0.014333 max=0.019187 Jy/beam ! Clean residual mean=0.000302 rms=0.003734 Jy/beam ! Combined flux in latest and established models = 0.130957 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.130957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225059Jy sigma=0.001128 ! Fit after self-cal, rms=0.224689Jy sigma=0.001126 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.427 mas, bmaj=5.288 mas, bpa=-29.22 degrees ! Estimated noise=933.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307669 Jy ! Component: 100 - total flux cleaned = 0.0475313 Jy ! Component: 150 - total flux cleaned = 0.0572572 Jy ! Component: 200 - total flux cleaned = 0.0630385 Jy ! Total flux subtracted in 200 components = 0.0630385 Jy ! Clean residual min=-0.008845 max=0.010728 Jy/beam ! Clean residual mean=0.000388 rms=0.003062 Jy/beam ! Combined flux in latest and established models = 0.193996 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 57 components and 0.193996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220490Jy sigma=0.001098 ! Fit after self-cal, rms=0.220068Jy sigma=0.001093 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.00* HO 1.00* ! KK 1.00* KP 1.02 LA 0.83 MK 0.96 ! NL 1.11 NY 1.00* OV 1.09 PT 2.00 ! SC 1.10 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.85 HN 1.00* HO 1.05 ! KK 1.00* KP 0.97 LA 0.88 MK 1.03 ! NL 1.00* NY 1.00* OV 0.95 PT 1.20 ! SC 1.00* TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.00* HO 1.00* ! KK 1.00* KP 1.06 LA 0.86 MK 0.92 ! NL 1.06 NY 1.00* OV 1.10 PT 1.81 ! SC 1.04 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.95 HN 1.00* HO 1.10 ! KK 1.00* KP 0.85 LA 0.85 MK 1.08 ! NL 1.00* NY 1.00* OV 1.03 PT 1.20 ! SC 1.00* TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.00* HO 1.00* ! KK 1.00* KP 1.13 LA 0.86 MK 1.14 ! NL 1.14 NY 1.00* OV 1.14 PT 0.89 ! SC 1.09 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.88 HN 1.00* HO 1.24 ! KK 1.00* KP 0.93 LA 0.89 MK 1.14 ! NL 1.00* NY 1.00* OV 1.08 PT 0.86 ! SC 1.00* TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.00* HO 1.00* ! KK 1.00* KP 1.11 LA 0.85 MK 1.04 ! NL 1.14 NY 1.00* OV 1.03 PT 1.08 ! SC 0.99 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.96 HN 1.00* HO 0.95 ! KK 1.00* KP 0.86 LA 0.86 MK 1.09 ! NL 1.00* NY 1.00* OV 1.06 PT 0.86 ! SC 1.00* TS 1.00* WZ 1.00* KB 1.00* ! ! ! Fit before self-cal, rms=0.220068Jy sigma=0.001093 ! Fit after self-cal, rms=0.236415Jy sigma=0.001077 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.459 mas, bmaj=5.43 mas, bpa=-29.32 degrees ! Estimated noise=935.529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352663 Jy ! Component: 100 - total flux cleaned = 0.00363726 Jy ! Component: 150 - total flux cleaned = 0.00363519 Jy ! Component: 200 - total flux cleaned = 0.00363279 Jy ! Total flux subtracted in 200 components = 0.00363279 Jy ! Clean residual min=-0.005564 max=0.007845 Jy/beam ! Clean residual mean=0.000078 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 0.197629 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.197629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236330Jy sigma=0.001076 ! Fit after self-cal, rms=0.237970Jy sigma=0.001072 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237970Jy sigma=0.001072 ! Fit after self-cal, rms=0.249065Jy sigma=0.001072 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=5.42 mas, bpa=-29.24 degrees ! Estimated noise=937.611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285073 Jy ! Component: 100 - total flux cleaned = 0.00311144 Jy ! Component: 150 - total flux cleaned = 0.0031883 Jy ! Component: 200 - total flux cleaned = 0.00318738 Jy ! Total flux subtracted in 200 components = 0.00318738 Jy ! Clean residual min=-0.005166 max=0.006465 Jy/beam ! Clean residual mean=0.000061 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.200816 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.200816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249015Jy sigma=0.001071 ! Fit after self-cal, rms=0.249391Jy sigma=0.001071 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-66, -48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571905 Jy ! Component: 100 - total flux cleaned = 0.00740789 Jy ! Component: 150 - total flux cleaned = 0.00792749 Jy ! Component: 200 - total flux cleaned = 0.00836932 Jy ! Total flux subtracted in 200 components = 0.00836932 Jy ! Clean residual min=-0.005016 max=0.005491 Jy/beam ! Clean residual mean=0.000020 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.209185 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.209185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249197Jy sigma=0.001070 ! Fit after self-cal, rms=0.249052Jy sigma=0.001070 ! Inverting map ! Added new window around map position (-17, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520509 Jy ! Component: 100 - total flux cleaned = 0.007503 Jy ! Component: 150 - total flux cleaned = 0.00841774 Jy ! Component: 200 - total flux cleaned = 0.00886227 Jy ! Total flux subtracted in 200 components = 0.00886227 Jy ! Clean residual min=-0.004792 max=0.004744 Jy/beam ! Clean residual mean=-0.000011 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.218048 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 99 components and 0.218048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248873Jy sigma=0.001069 ! Fit after self-cal, rms=0.248724Jy sigma=0.001069 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248724Jy sigma=0.001069 ! Fit after self-cal, rms=0.250612Jy sigma=0.001068 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=5.369 mas, bpa=-29.14 degrees ! Estimated noise=936.588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394232 Jy ! Component: 100 - total flux cleaned = 0.00550359 Jy ! Component: 150 - total flux cleaned = 0.0063162 Jy ! Component: 200 - total flux cleaned = 0.00670846 Jy ! Total flux subtracted in 200 components = 0.00670846 Jy ! Clean residual min=-0.004895 max=0.004462 Jy/beam ! Clean residual mean=-0.000043 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.224756 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 112 components and 0.224756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250482Jy sigma=0.001068 ! Fit after self-cal, rms=0.250372Jy sigma=0.001068 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117594 Jy ! Component: 100 - total flux cleaned = 0.00135382 Jy ! Component: 150 - total flux cleaned = 0.0015089 Jy ! Component: 200 - total flux cleaned = 0.00172106 Jy ! Total flux subtracted in 200 components = 0.00172106 Jy ! Clean residual min=-0.004869 max=0.004529 Jy/beam ! Clean residual mean=-0.000044 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.226477 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 0.226477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250301Jy sigma=0.001067 ! Fit after self-cal, rms=0.250236Jy sigma=0.001067 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250236Jy sigma=0.001067 ! Fit after self-cal, rms=0.251074Jy sigma=0.001067 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.286 mas, bmaj=28.04 mas, bpa=2.276 degrees ! Estimated noise=1195.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245065 Jy ! Component: 100 - total flux cleaned = 0.00341483 Jy ! Component: 150 - total flux cleaned = 0.00364146 Jy ! Component: 200 - total flux cleaned = 0.00383559 Jy ! Total flux subtracted in 200 components = 0.00383559 Jy ! Clean residual min=-0.005376 max=0.004417 Jy/beam ! Clean residual mean=-0.000098 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.230313 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 129 components and 0.230313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251041Jy sigma=0.001067 ! Fit after self-cal, rms=0.250969Jy sigma=0.001067 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524548 Jy ! Component: 100 - total flux cleaned = 0.000600418 Jy ! Component: 150 - total flux cleaned = 0.000659698 Jy ! Component: 200 - total flux cleaned = 0.000659623 Jy ! Total flux subtracted in 200 components = 0.000659623 Jy ! Clean residual min=-0.005423 max=0.004581 Jy/beam ! Clean residual mean=-0.000104 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 0.230972 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 132 components and 0.230972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250964Jy sigma=0.001067 ! Fit after self-cal, rms=0.250950Jy sigma=0.001067 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.435 mas, bmaj=5.339 mas, bpa=-29.14 degrees ! Estimated noise=937.861 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.435 x 5.339 at -29.14 degrees (North through East) ! Clean map min=-0.0043271 max=0.11989 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.715 mas, bmaj=4.167 mas, bpa=-34.15 degrees ! Estimated noise=2281.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101324 Jy ! Component: 100 - total flux cleaned = 0.134938 Jy ! Component: 150 - total flux cleaned = 0.15679 Jy ! Component: 200 - total flux cleaned = 0.173789 Jy ! Total flux subtracted in 200 components = 0.173789 Jy ! Clean residual min=-0.012351 max=0.013165 Jy/beam ! Clean residual mean=0.000144 rms=0.003147 Jy/beam ! Combined flux in latest and established models = 0.173789 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.173789 Jy ! Inverting map and beam ! Estimated beam: bmin=2.435 mas, bmaj=5.339 mas, bpa=-29.14 degrees ! Estimated noise=937.861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214398 Jy ! Component: 100 - total flux cleaned = 0.033306 Jy ! Component: 150 - total flux cleaned = 0.0406796 Jy ! Component: 200 - total flux cleaned = 0.0439571 Jy ! Total flux subtracted in 200 components = 0.0439571 Jy ! Clean residual min=-0.005573 max=0.005316 Jy/beam ! Clean residual mean=0.000037 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.217746 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.217746 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.286 mas, bmaj=28.04 mas, bpa=2.276 degrees ! Estimated noise=1195.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571012 Jy ! Component: 100 - total flux cleaned = 0.00854312 Jy ! Component: 150 - total flux cleaned = 0.0103988 Jy ! Component: 200 - total flux cleaned = 0.0108411 Jy ! Total flux subtracted in 200 components = 0.0108411 Jy ! Clean residual min=-0.005484 max=0.004680 Jy/beam ! Clean residual mean=-0.000070 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.228587 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000384772 Jy ! Component: 100 - total flux cleaned = 0.000728324 Jy ! Component: 150 - total flux cleaned = 0.00106908 Jy ! Component: 200 - total flux cleaned = 0.0013384 Jy ! Total flux subtracted in 200 components = 0.0013384 Jy ! Clean residual min=-0.005402 max=0.004690 Jy/beam ! Clean residual mean=-0.000084 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.229926 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 74 components and 0.229926 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.435 mas, bmaj=5.339 mas, bpa=-29.14 degrees ! Estimated noise=937.861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107237 Jy ! Component: 100 - total flux cleaned = -0.00160859 Jy ! Component: 150 - total flux cleaned = -0.00138095 Jy ! Component: 200 - total flux cleaned = -0.00127869 Jy ! Total flux subtracted in 200 components = -0.00127869 Jy ! Clean residual min=-0.004895 max=0.004754 Jy/beam ! Clean residual mean=-0.000032 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.228647 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.228647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251002Jy sigma=0.001067 ! Fit after self-cal, rms=0.250990Jy sigma=0.001067 wmodel J0424-3848_S_2009_05_13_pus_map.mod ! Writing 93 model components to file: J0424-3848_S_2009_05_13_pus_map.mod wobs J0424-3848_S_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0424-3848_S_2009_05_13_pus_uvs.fits wwins J0424-3848_S_2009_05_13_pus_map.win ! wwins: Wrote 4 windows to J0424-3848_S_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000901384 Jy ! Component: 100 - total flux cleaned = -0.00098005 Jy ! Component: 150 - total flux cleaned = -0.00127057 Jy ! Component: 200 - total flux cleaned = -0.00127062 Jy ! Component: 250 - total flux cleaned = -0.00114095 Jy ! Component: 300 - total flux cleaned = -0.00101678 Jy ! Component: 350 - total flux cleaned = -0.000900113 Jy ! Component: 400 - total flux cleaned = -0.00084368 Jy ! Component: 450 - total flux cleaned = -0.000788423 Jy ! Component: 500 - total flux cleaned = -0.000733919 Jy ! Component: 550 - total flux cleaned = -0.000574552 Jy ! Component: 600 - total flux cleaned = -0.000471927 Jy ! Component: 650 - total flux cleaned = -0.000521152 Jy ! Component: 700 - total flux cleaned = -0.000423747 Jy ! Component: 750 - total flux cleaned = -0.000518392 Jy ! Component: 800 - total flux cleaned = -0.00042469 Jy ! Component: 850 - total flux cleaned = -0.000654145 Jy ! Component: 900 - total flux cleaned = -0.000788401 Jy ! Component: 950 - total flux cleaned = -0.000965133 Jy ! Component: 1000 - total flux cleaned = -0.00113772 Jy ! Component: 1050 - total flux cleaned = -0.00126443 Jy ! Component: 1100 - total flux cleaned = -0.00130715 Jy ! Component: 1150 - total flux cleaned = -0.0015534 Jy ! Component: 1200 - total flux cleaned = -0.00159352 Jy ! Component: 1250 - total flux cleaned = -0.00167211 Jy ! Component: 1300 - total flux cleaned = -0.00178939 Jy ! Component: 1350 - total flux cleaned = -0.00182736 Jy ! Component: 1400 - total flux cleaned = -0.00194135 Jy ! Component: 1450 - total flux cleaned = -0.00209131 Jy ! Component: 1500 - total flux cleaned = -0.00209092 Jy ! Component: 1550 - total flux cleaned = -0.00220078 Jy ! Component: 1600 - total flux cleaned = -0.00230921 Jy ! Component: 1650 - total flux cleaned = -0.00230918 Jy ! Component: 1700 - total flux cleaned = -0.0024154 Jy ! Component: 1750 - total flux cleaned = -0.00252008 Jy ! Component: 1800 - total flux cleaned = -0.00265821 Jy ! Component: 1850 - total flux cleaned = -0.00265855 Jy ! Component: 1900 - total flux cleaned = -0.00269205 Jy ! Component: 1950 - total flux cleaned = -0.00282568 Jy ! Component: 2000 - total flux cleaned = -0.0028256 Jy ! Component: 2050 - total flux cleaned = -0.00285842 Jy ! Component: 2100 - total flux cleaned = -0.00289125 Jy ! Component: 2150 - total flux cleaned = -0.00298781 Jy ! Component: 2200 - total flux cleaned = -0.00298799 Jy ! Component: 2250 - total flux cleaned = -0.00317742 Jy ! Component: 2300 - total flux cleaned = -0.00320844 Jy ! Component: 2350 - total flux cleaned = -0.00330151 Jy ! Component: 2400 - total flux cleaned = -0.00333253 Jy ! Component: 2450 - total flux cleaned = -0.00342415 Jy ! Component: 2500 - total flux cleaned = -0.0035451 Jy ! Component: 2550 - total flux cleaned = -0.00357511 Jy ! Component: 2600 - total flux cleaned = -0.00366455 Jy ! Component: 2650 - total flux cleaned = -0.00375325 Jy ! Component: 2700 - total flux cleaned = -0.00378285 Jy ! Component: 2750 - total flux cleaned = -0.00395744 Jy ! Component: 2800 - total flux cleaned = -0.00395776 Jy ! Component: 2850 - total flux cleaned = -0.00404367 Jy ! Component: 2900 - total flux cleaned = -0.00410077 Jy ! Component: 2950 - total flux cleaned = -0.00418578 Jy ! Component: 3000 - total flux cleaned = -0.00418601 Jy ! Component: 3050 - total flux cleaned = -0.00426971 Jy ! Component: 3100 - total flux cleaned = -0.004408 Jy ! Component: 3150 - total flux cleaned = -0.00446293 Jy ! Component: 3200 - total flux cleaned = -0.00457191 Jy ! Component: 3250 - total flux cleaned = -0.00468018 Jy ! Component: 3300 - total flux cleaned = -0.00473443 Jy ! Component: 3350 - total flux cleaned = -0.0048954 Jy ! Component: 3400 - total flux cleaned = -0.00497511 Jy ! Component: 3450 - total flux cleaned = -0.00497513 Jy ! Component: 3500 - total flux cleaned = -0.00513325 Jy ! Component: 3550 - total flux cleaned = -0.00521174 Jy ! Component: 3600 - total flux cleaned = -0.00531574 Jy ! Component: 3650 - total flux cleaned = -0.00539347 Jy ! Component: 3700 - total flux cleaned = -0.00544524 Jy ! Component: 3750 - total flux cleaned = -0.00570138 Jy ! Component: 3800 - total flux cleaned = -0.00572691 Jy ! Component: 3850 - total flux cleaned = -0.00580293 Jy ! Component: 3900 - total flux cleaned = -0.00592908 Jy ! Component: 3950 - total flux cleaned = -0.00595388 Jy ! Component: 4000 - total flux cleaned = -0.00602883 Jy ! Component: 4050 - total flux cleaned = -0.00617796 Jy ! Total flux subtracted in 4096 components = -0.00620272 Jy ! Clean residual min=-0.001477 max=0.001614 Jy/beam ! Clean residual mean=-0.000015 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.222444 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 348 components and 0.222444 Jy ![Exited script file: muppet] wmap "J0424-3848_S_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.435 x 5.339 at -29.14 degrees (North through East) ! Clean map min=-0.0038966 max=0.11735 Jy/beam ! Writing clean map to FITS file: J0424-3848_S_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117354 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000411415 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05173 1.05173 2.10346 4.20692 8.41384 16.8277 33.6553 67.3107 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.435 x 5.339 at -29.14 degrees (North through East) ! Clean map min=-0.0038966 max=0.11735 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0424-3848_S_2009_05_13_pus_uvs.log closed on Sun Jan 22 11:33:09 2017