! Started logfile: J0423+4150_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:38:43 2017 obs J0423+4150_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0423+4150_X_2009_05_13_pus_uva.fits ! AN table 1: 36 integrations on 120 of 120 possible baselines. ! AN table 2: 132 integrations on 120 of 120 possible baselines. ! AN table 3: 100 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.158116 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0423+4150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 20340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0423+4150_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 322 telescope corrections were flagged in sub-array 1. ! A total of 1688 telescope corrections were flagged in sub-array 2. ! A total of 899 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 322 telescope corrections were flagged in sub-array 1. ! A total of 1688 telescope corrections were flagged in sub-array 2. ! A total of 899 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 322 telescope corrections were flagged in sub-array 1. ! A total of 1688 telescope corrections were flagged in sub-array 2. ! A total of 899 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 322 telescope corrections were flagged in sub-array 1. ! A total of 1688 telescope corrections were flagged in sub-array 2. ! A total of 899 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.619159Jy sigma=0.005187 ! Fit after self-cal, rms=0.287530Jy sigma=0.002434 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5364 mas, bmaj=0.9204 mas, bpa=6.428 degrees ! Estimated noise=971.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.633726 Jy ! Component: 100 - total flux cleaned = 0.810262 Jy ! Total flux subtracted in 100 components = 0.810262 Jy ! Clean residual min=-0.017856 max=0.077109 Jy/beam ! Clean residual mean=0.000866 rms=0.005566 Jy/beam ! Combined flux in latest and established models = 0.810262 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.810262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257890Jy sigma=0.002377 ! Fit after self-cal, rms=0.257712Jy sigma=0.002376 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0822572 Jy ! Component: 100 - total flux cleaned = 0.121959 Jy ! Total flux subtracted in 100 components = 0.121959 Jy ! Clean residual min=-0.013554 max=0.042397 Jy/beam ! Clean residual mean=0.000665 rms=0.004060 Jy/beam ! Combined flux in latest and established models = 0.932221 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.932221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216397Jy sigma=0.001949 ! Fit after self-cal, rms=0.216225Jy sigma=0.001948 ! Inverting map ! Added new window around map position (-3, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427831 Jy ! Component: 100 - total flux cleaned = 0.0694604 Jy ! Total flux subtracted in 100 components = 0.0694604 Jy ! Clean residual min=-0.011828 max=0.037500 Jy/beam ! Clean residual mean=0.000563 rms=0.003432 Jy/beam ! Combined flux in latest and established models = 1.00168 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 1.00168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200072Jy sigma=0.001757 ! Fit after self-cal, rms=0.198611Jy sigma=0.001749 ! Inverting map ! Added new window around map position (-0.9, -0.3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331328 Jy ! Component: 100 - total flux cleaned = 0.0530813 Jy ! Total flux subtracted in 100 components = 0.0530813 Jy ! Clean residual min=-0.009756 max=0.023996 Jy/beam ! Clean residual mean=0.000480 rms=0.002881 Jy/beam ! Combined flux in latest and established models = 1.05476 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 1.05476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188866Jy sigma=0.001628 ! Fit after self-cal, rms=0.188035Jy sigma=0.001623 ! Inverting map ! Added new window around map position (-3.9, -0.9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250267 Jy ! Component: 100 - total flux cleaned = 0.042166 Jy ! Total flux subtracted in 100 components = 0.042166 Jy ! Clean residual min=-0.009626 max=0.017784 Jy/beam ! Clean residual mean=0.000419 rms=0.002503 Jy/beam ! Combined flux in latest and established models = 1.09693 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 1.09693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181207Jy sigma=0.001535 ! Fit after self-cal, rms=0.180616Jy sigma=0.001532 ! Inverting map ! Added new window around map position (1.1, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167846 Jy ! Component: 100 - total flux cleaned = 0.0296713 Jy ! Total flux subtracted in 100 components = 0.0296713 Jy ! Clean residual min=-0.008950 max=0.013027 Jy/beam ! Clean residual mean=0.000375 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 1.1266 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 1.1266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177180Jy sigma=0.001484 ! Fit after self-cal, rms=0.177092Jy sigma=0.001483 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6777 mas, bmaj=1.088 mas, bpa=4.299 degrees ! Estimated noise=602.979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.1, -0.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371689 Jy ! Component: 100 - total flux cleaned = 0.0634508 Jy ! Component: 150 - total flux cleaned = 0.0841068 Jy ! Component: 200 - total flux cleaned = 0.100654 Jy ! Total flux subtracted in 200 components = 0.100654 Jy ! Clean residual min=-0.002451 max=0.015283 Jy/beam ! Clean residual mean=0.005465 rms=0.002165 Jy/beam ! Combined flux in latest and established models = 1.22725 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 148 components and 1.22725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169066Jy sigma=0.001358 ! Fit after self-cal, rms=0.168422Jy sigma=0.001353 ! Inverting map ! Added new window around map position (-6.5, -1.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188142 Jy ! Component: 100 - total flux cleaned = 0.0324561 Jy ! Component: 150 - total flux cleaned = 0.0434226 Jy ! Component: 200 - total flux cleaned = 0.0524506 Jy ! Total flux subtracted in 200 components = 0.0524506 Jy ! Clean residual min=-0.003189 max=0.011804 Jy/beam ! Clean residual mean=0.004138 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 1.27971 Jy ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 208 components and 1.27971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166448Jy sigma=0.001314 ! Fit after self-cal, rms=0.166272Jy sigma=0.001313 ! Inverting map ! Added new window around map position (-9.4, 13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114572 Jy ! Component: 100 - total flux cleaned = 0.0197204 Jy ! Component: 150 - total flux cleaned = 0.0266532 Jy ! Component: 200 - total flux cleaned = 0.0325604 Jy ! Total flux subtracted in 200 components = 0.0325604 Jy ! Clean residual min=-0.004024 max=0.009995 Jy/beam ! Clean residual mean=0.003367 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 1.31227 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 247 components and 1.31227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165540Jy sigma=0.001297 ! Fit after self-cal, rms=0.165474Jy sigma=0.001296 ! Inverting map ! Added new window around map position (1.8, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00923871 Jy ! Component: 100 - total flux cleaned = 0.0151026 Jy ! Component: 150 - total flux cleaned = 0.0199749 Jy ! Component: 200 - total flux cleaned = 0.0241507 Jy ! Total flux subtracted in 200 components = 0.0241507 Jy ! Clean residual min=-0.004679 max=0.008451 Jy/beam ! Clean residual mean=0.002778 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 1.33642 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 274 components and 1.33642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165059Jy sigma=0.001286 ! Fit after self-cal, rms=0.165007Jy sigma=0.001286 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.01 HO 1.00* ! KK 0.99 KP 1.01 LA 0.99 MK 1.04 ! NL 0.98 NY 1.00 OV 0.97 PT 0.97 ! SC 1.01 TS 0.95 WZ 1.00* KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 1.00 HO 1.00* ! KK 1.11 KP 1.01 LA 1.00 MK 0.99 ! NL 1.00* NY 1.01 OV 0.99 PT 0.98 ! SC 1.01 TS 0.90 WZ 1.08 KB 0.88 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 HN 1.02 HO 1.00* ! KK 1.00* KP 1.03 LA 1.03 MK 1.00 ! NL 0.97 NY 0.96 OV 0.98 PT 0.99 ! SC 1.00 TS 1.00* WZ 1.01 KB 1.00* ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 HO 1.00* ! KK 1.02 KP 0.97 LA 0.97 MK 1.04 ! NL 0.97 NY 0.96 OV 0.95 PT 1.00 ! SC 1.03 TS 0.94 WZ 1.00* KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.97 HN 1.02 HO 1.00* ! KK 1.11 KP 0.95 LA 0.97 MK 1.02 ! NL 1.00* NY 0.99 OV 0.98 PT 1.04 ! SC 1.03 TS 0.91 WZ 1.07 KB 0.87 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.98 HN 1.03 HO 1.00* ! KK 1.00* KP 0.98 LA 1.02 MK 1.02 ! NL 0.95 NY 0.96 OV 0.97 PT 1.04 ! SC 1.01 TS 1.00* WZ 1.00 KB 1.00* ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 HO 1.00* ! KK 1.02 KP 0.99 LA 1.02 MK 1.02 ! NL 1.02 NY 1.00 OV 0.99 PT 1.02 ! SC 1.07 TS 0.98 WZ 1.00* KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 1.03 HO 1.00* ! KK 1.09 KP 1.00 LA 1.02 MK 0.96 ! NL 1.00* NY 1.03 OV 1.00 PT 1.02 ! SC 1.05 TS 0.91 WZ 1.06 KB 0.91 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 HN 1.05 HO 1.00* ! KK 1.00* KP 1.01 LA 1.06 MK 0.97 ! NL 1.00 NY 0.99 OV 1.00 PT 1.05 ! SC 1.04 TS 1.00* WZ 1.02 KB 1.00* ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 HO 1.00* ! KK 1.02 KP 1.02 LA 0.99 MK 1.02 ! NL 1.01 NY 1.00 OV 0.99 PT 1.02 ! SC 1.01 TS 0.95 WZ 1.00* KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.01 HO 1.00* ! KK 1.12 KP 1.00 LA 1.00 MK 0.99 ! NL 1.00* NY 1.01 OV 1.01 PT 1.02 ! SC 0.99 TS 0.96 WZ 1.07 KB 0.88 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 1.05 HO 1.00* ! KK 1.00* KP 1.02 LA 1.04 MK 0.97 ! NL 1.00 NY 0.96 OV 1.00 PT 1.04 ! SC 0.99 TS 1.00* WZ 1.02 KB 1.00* ! ! ! Fit before self-cal, rms=0.165007Jy sigma=0.001286 ! Fit after self-cal, rms=0.159272Jy sigma=0.001179 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.683 mas, bmaj=1.088 mas, bpa=4.773 degrees ! Estimated noise=605.424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.9, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.01256e-05 Jy ! Component: 100 - total flux cleaned = -0.000687743 Jy ! Component: 150 - total flux cleaned = -0.00147628 Jy ! Component: 200 - total flux cleaned = -0.00219036 Jy ! Total flux subtracted in 200 components = -0.00219036 Jy ! Clean residual min=-0.004240 max=0.003522 Jy/beam ! Clean residual mean=-0.000202 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 1.33423 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 306 components and 1.33423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158904Jy sigma=0.001176 ! Fit after self-cal, rms=0.158936Jy sigma=0.001175 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158936Jy sigma=0.001175 ! Fit after self-cal, rms=0.158834Jy sigma=0.001171 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.683 mas, bmaj=1.087 mas, bpa=4.654 degrees ! Estimated noise=605.784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403075 Jy ! Component: 100 - total flux cleaned = -6.19274e-06 Jy ! Component: 150 - total flux cleaned = -0.000615361 Jy ! Component: 200 - total flux cleaned = -0.00106215 Jy ! Total flux subtracted in 200 components = -0.00106215 Jy ! Clean residual min=-0.003627 max=0.003489 Jy/beam ! Clean residual mean=-0.000082 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 1.33316 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 327 components and 1.33316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158630Jy sigma=0.001169 ! Fit after self-cal, rms=0.158619Jy sigma=0.001169 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.18738e-05 Jy ! Component: 100 - total flux cleaned = -0.000604322 Jy ! Component: 150 - total flux cleaned = -0.00108086 Jy ! Component: 200 - total flux cleaned = -0.00152544 Jy ! Total flux subtracted in 200 components = -0.00152544 Jy ! Clean residual min=-0.003550 max=0.003467 Jy/beam ! Clean residual mean=-0.000047 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 1.33164 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 338 components and 1.33164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158504Jy sigma=0.001168 ! Fit after self-cal, rms=0.158491Jy sigma=0.001168 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158491Jy sigma=0.001168 ! Fit after self-cal, rms=0.158349Jy sigma=0.001166 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6828 mas, bmaj=1.088 mas, bpa=4.646 degrees ! Estimated noise=605.806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277547 Jy ! Component: 100 - total flux cleaned = -0.000207327 Jy ! Component: 150 - total flux cleaned = -0.000560273 Jy ! Component: 200 - total flux cleaned = -0.00105107 Jy ! Total flux subtracted in 200 components = -0.00105107 Jy ! Clean residual min=-0.003115 max=0.003427 Jy/beam ! Clean residual mean=0.000050 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 1.33059 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 356 components and 1.33059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158246Jy sigma=0.001165 ! Fit after self-cal, rms=0.158237Jy sigma=0.001165 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.4, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247153 Jy ! Component: 100 - total flux cleaned = 0.00247322 Jy ! Component: 150 - total flux cleaned = 0.00231301 Jy ! Component: 200 - total flux cleaned = 0.00216074 Jy ! Total flux subtracted in 200 components = 0.00216074 Jy ! Clean residual min=-0.003015 max=0.003076 Jy/beam ! Clean residual mean=-0.000003 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 1.33275 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 373 components and 1.33275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158139Jy sigma=0.001164 ! Fit after self-cal, rms=0.158127Jy sigma=0.001164 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158127Jy sigma=0.001164 ! Fit after self-cal, rms=0.158068Jy sigma=0.001164 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=2.806 mas, bpa=-68.03 degrees ! Estimated noise=843.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.28009e-05 Jy ! Component: 100 - total flux cleaned = -0.00027699 Jy ! Component: 150 - total flux cleaned = -0.000357931 Jy ! Component: 200 - total flux cleaned = -0.000358742 Jy ! Total flux subtracted in 200 components = -0.000358742 Jy ! Clean residual min=-0.003531 max=0.003963 Jy/beam ! Clean residual mean=0.000094 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 1.33239 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 410 components and 1.33239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158046Jy sigma=0.001163 ! Fit after self-cal, rms=0.158037Jy sigma=0.001163 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.43675e-05 Jy ! Component: 100 - total flux cleaned = -7.25736e-05 Jy ! Component: 150 - total flux cleaned = -0.000121987 Jy ! Component: 200 - total flux cleaned = -0.000208953 Jy ! Total flux subtracted in 200 components = -0.000208953 Jy ! Clean residual min=-0.003542 max=0.003840 Jy/beam ! Clean residual mean=0.000102 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 1.33218 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 435 components and 1.33218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158033Jy sigma=0.001163 ! Fit after self-cal, rms=0.158030Jy sigma=0.001163 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6826 mas, bmaj=1.088 mas, bpa=4.652 degrees ! Estimated noise=605.675 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6826 x 1.088 at 4.652 degrees (North through East) ! Clean map min=-0.0027928 max=0.84042 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158030Jy sigma=0.001163 ! Fit after self-cal, rms=5.109556Jy sigma=0.001022 ! Inverting map and beam ! Estimated beam: bmin=0.6826 mas, bmaj=1.088 mas, bpa=4.674 degrees ! Estimated noise=606.271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000484781 Jy ! Component: 100 - total flux cleaned = -0.000486269 Jy ! Component: 150 - total flux cleaned = -0.000636375 Jy ! Component: 200 - total flux cleaned = -0.000706023 Jy ! Total flux subtracted in 200 components = -0.000706023 Jy ! Clean residual min=-0.002806 max=0.003018 Jy/beam ! Clean residual mean=0.000050 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 1.33147 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 461 components and 1.33147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.109541Jy sigma=0.001021 ! Fit after self-cal, rms=5.110139Jy sigma=0.001021 ! Inverting map ! Added new window around map position (-5.4, 18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168006 Jy ! Component: 100 - total flux cleaned = 0.00182056 Jy ! Component: 150 - total flux cleaned = 0.00181977 Jy ! Component: 200 - total flux cleaned = 0.00175755 Jy ! Total flux subtracted in 200 components = 0.00175755 Jy ! Clean residual min=-0.002772 max=0.002876 Jy/beam ! Clean residual mean=0.000009 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 1.33323 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 472 components and 1.33323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.110119Jy sigma=0.001020 ! Fit after self-cal, rms=5.109701Jy sigma=0.001020 ! Inverting map ! Added new window around map position (-25, -12.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213472 Jy ! Component: 100 - total flux cleaned = 0.0021388 Jy ! Component: 150 - total flux cleaned = 0.00208061 Jy ! Component: 200 - total flux cleaned = 0.00196763 Jy ! Total flux subtracted in 200 components = 0.00196763 Jy ! Clean residual min=-0.002715 max=0.002749 Jy/beam ! Clean residual mean=-0.000021 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 1.3352 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 482 components and 1.3352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.109687Jy sigma=0.001020 ! Fit after self-cal, rms=5.109636Jy sigma=0.001020 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.109636Jy sigma=0.001020 ! Fit after self-cal, rms=4.903290Jy sigma=0.001019 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5374 mas, bmaj=0.9208 mas, bpa=7.058 degrees ! Estimated noise=986.407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.632834 Jy ! Component: 100 - total flux cleaned = 0.812587 Jy ! Component: 150 - total flux cleaned = 0.897892 Jy ! Component: 200 - total flux cleaned = 0.954569 Jy ! Total flux subtracted in 200 components = 0.954569 Jy ! Clean residual min=-0.010579 max=0.032512 Jy/beam ! Clean residual mean=0.000600 rms=0.003504 Jy/beam ! Combined flux in latest and established models = 0.954569 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.954569 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6823 mas, bmaj=1.088 mas, bpa=4.698 degrees ! Estimated noise=606.328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.088168 Jy ! Component: 100 - total flux cleaned = 0.147211 Jy ! Component: 150 - total flux cleaned = 0.190394 Jy ! Component: 200 - total flux cleaned = 0.223076 Jy ! Total flux subtracted in 200 components = 0.223076 Jy ! Clean residual min=-0.003908 max=0.019440 Jy/beam ! Clean residual mean=0.003881 rms=0.002997 Jy/beam ! Combined flux in latest and established models = 1.17764 Jy ! Adding 124 model components to the UV plane model. ! The established model now contains 134 components and 1.17764 Jy ! Inverting map ! Added new window around map position (-3.7, -2.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253024 Jy ! Component: 100 - total flux cleaned = 0.0450879 Jy ! Component: 150 - total flux cleaned = 0.0608751 Jy ! Component: 200 - total flux cleaned = 0.0737167 Jy ! Total flux subtracted in 200 components = 0.0737167 Jy ! Clean residual min=-0.002450 max=0.008570 Jy/beam ! Clean residual mean=0.002046 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 1.25136 Jy ! Adding 125 model components to the UV plane model. ! The established model now contains 245 components and 1.25136 Jy ! Inverting map ! Added new window around map position (-5, -2.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106733 Jy ! Component: 100 - total flux cleaned = 0.0194869 Jy ! Component: 150 - total flux cleaned = 0.0269792 Jy ! Component: 200 - total flux cleaned = 0.033477 Jy ! Total flux subtracted in 200 components = 0.033477 Jy ! Clean residual min=-0.002207 max=0.005092 Jy/beam ! Clean residual mean=0.001218 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 1.28484 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 312 components and 1.28484 Jy ! Inverting map ! Added new window around map position (-9.6, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596342 Jy ! Component: 100 - total flux cleaned = 0.0110829 Jy ! Component: 150 - total flux cleaned = 0.0156667 Jy ! Component: 200 - total flux cleaned = 0.0197762 Jy ! Total flux subtracted in 200 components = 0.0197762 Jy ! Clean residual min=-0.002250 max=0.003839 Jy/beam ! Clean residual mean=0.000744 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 1.30461 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 354 components and 1.30461 Jy ! Inverting map ! Added new window around map position (-11, -13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407795 Jy ! Component: 100 - total flux cleaned = 0.00746061 Jy ! Component: 150 - total flux cleaned = 0.0105049 Jy ! Component: 200 - total flux cleaned = 0.0132547 Jy ! Total flux subtracted in 200 components = 0.0132547 Jy ! Clean residual min=-0.002241 max=0.003240 Jy/beam ! Clean residual mean=0.000428 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 1.31787 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 384 components and 1.31787 Jy ! Inverting map ! Added new window around map position (-21.9, -12.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301606 Jy ! Component: 100 - total flux cleaned = 0.00534918 Jy ! Component: 150 - total flux cleaned = 0.00746547 Jy ! Component: 200 - total flux cleaned = 0.0091661 Jy ! Total flux subtracted in 200 components = 0.0091661 Jy ! Clean residual min=-0.002388 max=0.002631 Jy/beam ! Clean residual mean=0.000222 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 1.32704 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 401 components and 1.32703 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.54 mas, bmaj=2.807 mas, bpa=-68.3 degrees ! Estimated noise=844.384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359536 Jy ! Component: 100 - total flux cleaned = 0.00609555 Jy ! Component: 150 - total flux cleaned = 0.00799967 Jy ! Component: 200 - total flux cleaned = 0.00948843 Jy ! Total flux subtracted in 200 components = 0.00948843 Jy ! Clean residual min=-0.002782 max=0.002376 Jy/beam ! Clean residual mean=-0.000008 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 1.33652 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000779948 Jy ! Component: 100 - total flux cleaned = 0.00128469 Jy ! Component: 150 - total flux cleaned = 0.00162065 Jy ! Component: 200 - total flux cleaned = 0.0018918 Jy ! Total flux subtracted in 200 components = 0.0018918 Jy ! Clean residual min=-0.002914 max=0.002250 Jy/beam ! Clean residual mean=-0.000131 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 1.33842 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 460 components and 1.33842 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6823 mas, bmaj=1.088 mas, bpa=4.698 degrees ! Estimated noise=606.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104106 Jy ! Component: 100 - total flux cleaned = -0.00132601 Jy ! Component: 150 - total flux cleaned = -0.00137811 Jy ! Component: 200 - total flux cleaned = -0.0013762 Jy ! Total flux subtracted in 200 components = -0.0013762 Jy ! Clean residual min=-0.002608 max=0.002219 Jy/beam ! Clean residual mean=-0.000011 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 1.33704 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 482 components and 1.33704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.903220Jy sigma=0.001017 ! Fit after self-cal, rms=4.903603Jy sigma=0.001016 wmodel J0423+4150_X_2009_05_13_pus_map.mod ! Writing 482 model components to file: J0423+4150_X_2009_05_13_pus_map.mod wobs J0423+4150_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0423+4150_X_2009_05_13_pus_uvs.fits wwins J0423+4150_X_2009_05_13_pus_map.win ! wwins: Wrote 18 windows to J0423+4150_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108439 Jy ! Component: 100 - total flux cleaned = -0.00154361 Jy ! Component: 150 - total flux cleaned = -0.00174248 Jy ! Component: 200 - total flux cleaned = -0.00189607 Jy ! Component: 250 - total flux cleaned = -0.00197137 Jy ! Component: 300 - total flux cleaned = -0.00211745 Jy ! Component: 350 - total flux cleaned = -0.00218909 Jy ! Component: 400 - total flux cleaned = -0.00225964 Jy ! Component: 450 - total flux cleaned = -0.00229444 Jy ! Component: 500 - total flux cleaned = -0.0023968 Jy ! Component: 550 - total flux cleaned = -0.0023967 Jy ! Component: 600 - total flux cleaned = -0.00243009 Jy ! Component: 650 - total flux cleaned = -0.002496 Jy ! Component: 700 - total flux cleaned = -0.00249611 Jy ! Component: 750 - total flux cleaned = -0.00252855 Jy ! Component: 800 - total flux cleaned = -0.00256024 Jy ! Component: 850 - total flux cleaned = -0.00249695 Jy ! Component: 900 - total flux cleaned = -0.00255979 Jy ! Component: 950 - total flux cleaned = -0.0025597 Jy ! Component: 1000 - total flux cleaned = -0.00252863 Jy ! Component: 1050 - total flux cleaned = -0.00252883 Jy ! Component: 1100 - total flux cleaned = -0.0024986 Jy ! Component: 1150 - total flux cleaned = -0.00249873 Jy ! Component: 1200 - total flux cleaned = -0.00249889 Jy ! Component: 1250 - total flux cleaned = -0.00252869 Jy ! Component: 1300 - total flux cleaned = -0.00249899 Jy ! Component: 1350 - total flux cleaned = -0.00246965 Jy ! Component: 1400 - total flux cleaned = -0.00246958 Jy ! Component: 1450 - total flux cleaned = -0.00249855 Jy ! Component: 1500 - total flux cleaned = -0.00246967 Jy ! Component: 1550 - total flux cleaned = -0.0024695 Jy ! Component: 1600 - total flux cleaned = -0.00244103 Jy ! Component: 1650 - total flux cleaned = -0.00241278 Jy ! Component: 1700 - total flux cleaned = -0.00244089 Jy ! Component: 1750 - total flux cleaned = -0.00244084 Jy ! Component: 1800 - total flux cleaned = -0.00241301 Jy ! Component: 1850 - total flux cleaned = -0.00241303 Jy ! Component: 1900 - total flux cleaned = -0.00235805 Jy ! Component: 1950 - total flux cleaned = -0.00238553 Jy ! Component: 2000 - total flux cleaned = -0.00233114 Jy ! Component: 2050 - total flux cleaned = -0.00235834 Jy ! Component: 2100 - total flux cleaned = -0.00235838 Jy ! Component: 2150 - total flux cleaned = -0.00235833 Jy ! Component: 2200 - total flux cleaned = -0.00235834 Jy ! Component: 2250 - total flux cleaned = -0.00238487 Jy ! Component: 2300 - total flux cleaned = -0.00233205 Jy ! Component: 2350 - total flux cleaned = -0.0023321 Jy ! Component: 2400 - total flux cleaned = -0.00238443 Jy ! Component: 2450 - total flux cleaned = -0.0023323 Jy ! Component: 2500 - total flux cleaned = -0.00230642 Jy ! Component: 2550 - total flux cleaned = -0.00235797 Jy ! Component: 2600 - total flux cleaned = -0.00233218 Jy ! Component: 2650 - total flux cleaned = -0.0023066 Jy ! Component: 2700 - total flux cleaned = -0.00230661 Jy ! Component: 2750 - total flux cleaned = -0.00228126 Jy ! Component: 2800 - total flux cleaned = -0.00228125 Jy ! Component: 2850 - total flux cleaned = -0.00228131 Jy ! Component: 2900 - total flux cleaned = -0.00225636 Jy ! Component: 2950 - total flux cleaned = -0.00225636 Jy ! Component: 3000 - total flux cleaned = -0.00225639 Jy ! Component: 3050 - total flux cleaned = -0.00223169 Jy ! Component: 3100 - total flux cleaned = -0.00223171 Jy ! Component: 3150 - total flux cleaned = -0.00220719 Jy ! Component: 3200 - total flux cleaned = -0.00223152 Jy ! Component: 3250 - total flux cleaned = -0.00215868 Jy ! Component: 3300 - total flux cleaned = -0.00215869 Jy ! Component: 3350 - total flux cleaned = -0.00215875 Jy ! Component: 3400 - total flux cleaned = -0.00213461 Jy ! Component: 3450 - total flux cleaned = -0.00211074 Jy ! Component: 3500 - total flux cleaned = -0.002087 Jy ! Component: 3550 - total flux cleaned = -0.0020633 Jy ! Component: 3600 - total flux cleaned = -0.00203958 Jy ! Component: 3650 - total flux cleaned = -0.00203965 Jy ! Component: 3700 - total flux cleaned = -0.00201625 Jy ! Component: 3750 - total flux cleaned = -0.00201626 Jy ! Component: 3800 - total flux cleaned = -0.00199285 Jy ! Component: 3850 - total flux cleaned = -0.0019928 Jy ! Component: 3900 - total flux cleaned = -0.00194651 Jy ! Component: 3950 - total flux cleaned = -0.00192353 Jy ! Component: 4000 - total flux cleaned = -0.00192352 Jy ! Component: 4050 - total flux cleaned = -0.00190065 Jy ! Total flux subtracted in 4096 components = -0.00187783 Jy ! Clean residual min=-0.001604 max=0.001241 Jy/beam ! Clean residual mean=0.000028 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 1.33516 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 806 components and 1.33516 Jy ![Exited script file: muppet] wmap "J0423+4150_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6823 x 1.088 at 4.698 degrees (North through East) ! Clean map min=-0.0023323 max=0.8427 Jy/beam ! Writing clean map to FITS file: J0423+4150_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.8427 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000427703 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.152262 0.152262 0.304524 0.609047 1.21809 2.43619 4.87238 9.74476 19.4895 38.979 77.9581 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.842 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6823 x 1.088 at 4.698 degrees (North through East) ! Clean map min=-0.0023323 max=0.8427 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0423+4150_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:38:52 2017