! Started logfile: J0423+4150_S_2009_05_13_pus_uvs.log on Sun Jan 22 11:32:51 2017 obs J0423+4150_S_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0423+4150_S_2009_05_13_pus_uva.fits ! AN table 1: 36 integrations on 120 of 120 possible baselines. ! AN table 2: 132 integrations on 120 of 120 possible baselines. ! AN table 3: 100 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.158116 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0423+4150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1341 lines of history. ! ! Reading 20340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0423+4150_S_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 322 telescope corrections were flagged in sub-array 1. ! A total of 1688 telescope corrections were flagged in sub-array 2. ! A total of 899 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 322 telescope corrections were flagged in sub-array 1. ! A total of 1688 telescope corrections were flagged in sub-array 2. ! A total of 899 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 322 telescope corrections were flagged in sub-array 1. ! A total of 1688 telescope corrections were flagged in sub-array 2. ! A total of 899 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 322 telescope corrections were flagged in sub-array 1. ! A total of 1688 telescope corrections were flagged in sub-array 2. ! A total of 899 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.740571Jy sigma=0.006005 ! Fit after self-cal, rms=0.512533Jy sigma=0.003841 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.102 mas, bmaj=3.154 mas, bpa=4.964 degrees ! Estimated noise=1052.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.51528 Jy ! Component: 100 - total flux cleaned = 0.709865 Jy ! Total flux subtracted in 100 components = 0.709865 Jy ! Clean residual min=-0.040093 max=0.201091 Jy/beam ! Clean residual mean=0.000680 rms=0.010614 Jy/beam ! Combined flux in latest and established models = 0.709865 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.709865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450525Jy sigma=0.003507 ! Fit after self-cal, rms=0.449447Jy sigma=0.003503 ! Inverting map ! Added new window around map position (-3, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178955 Jy ! Component: 100 - total flux cleaned = 0.275345 Jy ! Total flux subtracted in 100 components = 0.275345 Jy ! Clean residual min=-0.027118 max=0.129697 Jy/beam ! Clean residual mean=0.000421 rms=0.007197 Jy/beam ! Combined flux in latest and established models = 0.98521 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 31 components and 0.985211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323205Jy sigma=0.002399 ! Fit after self-cal, rms=0.307076Jy sigma=0.002293 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.093299 Jy ! Component: 100 - total flux cleaned = 0.152512 Jy ! Total flux subtracted in 100 components = 0.152512 Jy ! Clean residual min=-0.019457 max=0.067191 Jy/beam ! Clean residual mean=0.000277 rms=0.004945 Jy/beam ! Combined flux in latest and established models = 1.13772 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 1.13772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253032Jy sigma=0.001789 ! Fit after self-cal, rms=0.248354Jy sigma=0.001756 ! Inverting map ! Added new window around map position (-5.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0601262 Jy ! Component: 100 - total flux cleaned = 0.0985067 Jy ! Total flux subtracted in 100 components = 0.0985067 Jy ! Clean residual min=-0.016319 max=0.041766 Jy/beam ! Clean residual mean=0.000186 rms=0.003825 Jy/beam ! Combined flux in latest and established models = 1.23623 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 1.23623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223081Jy sigma=0.001508 ! Fit after self-cal, rms=0.220364Jy sigma=0.001488 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357661 Jy ! Component: 100 - total flux cleaned = 0.0593587 Jy ! Total flux subtracted in 100 components = 0.0593587 Jy ! Clean residual min=-0.015218 max=0.027535 Jy/beam ! Clean residual mean=0.000130 rms=0.003293 Jy/beam ! Combined flux in latest and established models = 1.29559 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 1.29559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210112Jy sigma=0.001384 ! Fit after self-cal, rms=0.209141Jy sigma=0.001377 ! Inverting map ! Added new window around map position (4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238083 Jy ! Component: 100 - total flux cleaned = 0.0411742 Jy ! Total flux subtracted in 100 components = 0.0411742 Jy ! Clean residual min=-0.014673 max=0.013533 Jy/beam ! Clean residual mean=0.000092 rms=0.003030 Jy/beam ! Combined flux in latest and established models = 1.33676 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 1.33676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204604Jy sigma=0.001330 ! Fit after self-cal, rms=0.204515Jy sigma=0.001329 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.581 mas, bmaj=3.843 mas, bpa=2.481 degrees ! Estimated noise=676.786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233435 Jy ! Component: 100 - total flux cleaned = 0.0377061 Jy ! Component: 150 - total flux cleaned = 0.0472723 Jy ! Component: 200 - total flux cleaned = 0.0509084 Jy ! Total flux subtracted in 200 components = 0.0509084 Jy ! Clean residual min=-0.008631 max=0.015053 Jy/beam ! Clean residual mean=0.001037 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 1.38767 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 1.38767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201798Jy sigma=0.001301 ! Fit after self-cal, rms=0.201679Jy sigma=0.001300 ! Inverting map ! Added new window around map position (-14, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158391 Jy ! Component: 100 - total flux cleaned = 0.0242381 Jy ! Component: 150 - total flux cleaned = 0.0265822 Jy ! Component: 200 - total flux cleaned = 0.0275673 Jy ! Total flux subtracted in 200 components = 0.0275673 Jy ! Clean residual min=-0.010083 max=0.011497 Jy/beam ! Clean residual mean=0.000585 rms=0.002019 Jy/beam ! Combined flux in latest and established models = 1.41524 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 101 components and 1.41524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200446Jy sigma=0.001285 ! Fit after self-cal, rms=0.200247Jy sigma=0.001283 ! Inverting map ! Added new window around map position (-23.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108331 Jy ! Component: 100 - total flux cleaned = 0.013497 Jy ! Component: 150 - total flux cleaned = 0.0147889 Jy ! Component: 200 - total flux cleaned = 0.0155042 Jy ! Total flux subtracted in 200 components = 0.0155042 Jy ! Clean residual min=-0.010356 max=0.009400 Jy/beam ! Clean residual mean=0.000331 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 1.43074 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 125 components and 1.43074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199556Jy sigma=0.001274 ! Fit after self-cal, rms=0.199484Jy sigma=0.001273 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.03 HO 1.00* ! KK 0.98 KP 1.02 LA 0.96 MK 0.98 ! NL 1.01 NY 1.29 OV 1.00 PT 0.99 ! SC 0.99 TS 1.01 WZ 1.00* KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.11 HO 1.00* ! KK 1.29 KP 0.99 LA 0.95 MK 1.05 ! NL 1.00* NY 1.17 OV 1.00 PT 1.00 ! SC 0.91 TS 1.02 WZ 1.03 KB 0.92 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 HN 1.03 HO 1.00* ! KK 1.00* KP 0.99 LA 0.96 MK 1.10 ! NL 1.00 NY 0.98 OV 0.99 PT 1.00 ! SC 0.91 TS 1.00* WZ 1.04 KB 1.00* ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.02 HO 1.00* ! KK 1.02 KP 1.03 LA 0.99 MK 1.02 ! NL 1.03 NY 1.32 OV 1.03 PT 0.99 ! SC 1.04 TS 0.95 WZ 1.00* KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.95 HN 1.07 HO 1.00* ! KK 1.08 KP 1.02 LA 1.01 MK 1.07 ! NL 1.00* NY 1.11 OV 1.02 PT 0.99 ! SC 0.96 TS 0.96 WZ 1.01 KB 1.01 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.97 HN 1.00 HO 1.00* ! KK 1.00* KP 1.04 LA 0.99 MK 1.08 ! NL 1.02 NY 0.92 OV 0.98 PT 1.00 ! SC 0.95 TS 1.00* WZ 1.02 KB 1.00* ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.00 HO 1.00* ! KK 0.96 KP 1.04 LA 1.00 MK 1.03 ! NL 1.00 NY 1.27 OV 1.06 PT 1.00 ! SC 1.00 TS 0.99 WZ 1.00* KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.97 HN 1.06 HO 1.00* ! KK 0.96 KP 1.03 LA 1.00 MK 1.08 ! NL 1.00* NY 1.07 OV 1.07 PT 1.00 ! SC 0.94 TS 1.00 WZ 0.98 KB 1.00 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.98 HN 1.00 HO 1.00* ! KK 1.00* KP 1.04 LA 1.01 MK 1.10 ! NL 1.00 NY 0.96 OV 1.06 PT 1.00 ! SC 0.92 TS 1.00* WZ 1.01 KB 1.00* ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.96 HO 1.00* ! KK 0.96 KP 1.00 LA 1.01 MK 0.97 ! NL 1.00 NY 1.36 OV 1.01 PT 0.99 ! SC 0.97 TS 1.00 WZ 1.00* KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 1.04 HO 1.00* ! KK 0.99 KP 1.01 LA 1.00 MK 1.00 ! NL 1.00* NY 1.11 OV 0.98 PT 1.03 ! SC 0.93 TS 0.98 WZ 0.96 KB 0.99 ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.02 HN 0.96 HO 1.00* ! KK 1.00* KP 1.01 LA 0.99 MK 1.02 ! NL 1.01 NY 0.94 OV 1.01 PT 1.01 ! SC 0.92 TS 1.00* WZ 1.00 KB 1.00* ! ! ! Fit before self-cal, rms=0.199484Jy sigma=0.001273 ! Fit after self-cal, rms=0.193038Jy sigma=0.001210 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=3.945 mas, bpa=2.232 degrees ! Estimated noise=686.664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273168 Jy ! Component: 100 - total flux cleaned = 0.000735965 Jy ! Component: 150 - total flux cleaned = 0.000936757 Jy ! Component: 200 - total flux cleaned = 0.000756984 Jy ! Total flux subtracted in 200 components = 0.000756984 Jy ! Clean residual min=-0.005865 max=0.005709 Jy/beam ! Clean residual mean=-0.000032 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 1.4315 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 139 components and 1.4315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192587Jy sigma=0.001207 ! Fit after self-cal, rms=0.192564Jy sigma=0.001206 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192564Jy sigma=0.001206 ! Fit after self-cal, rms=0.188370Jy sigma=0.001197 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=3.973 mas, bpa=2.791 degrees ! Estimated noise=685.766 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00072726 Jy ! Component: 100 - total flux cleaned = -0.000329134 Jy ! Component: 150 - total flux cleaned = -0.000668193 Jy ! Component: 200 - total flux cleaned = -0.00112452 Jy ! Total flux subtracted in 200 components = -0.00112452 Jy ! Clean residual min=-0.004965 max=0.006050 Jy/beam ! Clean residual mean=0.000054 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 1.43037 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 150 components and 1.43037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188019Jy sigma=0.001194 ! Fit after self-cal, rms=0.187939Jy sigma=0.001194 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-40, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041578 Jy ! Component: 100 - total flux cleaned = 0.00553855 Jy ! Component: 150 - total flux cleaned = 0.00640849 Jy ! Component: 200 - total flux cleaned = 0.00653654 Jy ! Total flux subtracted in 200 components = 0.00653654 Jy ! Clean residual min=-0.004841 max=0.004773 Jy/beam ! Clean residual mean=-0.000040 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 1.43691 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 165 components and 1.43691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187632Jy sigma=0.001192 ! Fit after self-cal, rms=0.187605Jy sigma=0.001191 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187605Jy sigma=0.001191 ! Fit after self-cal, rms=0.182262Jy sigma=0.001182 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=3.985 mas, bpa=2.907 degrees ! Estimated noise=684.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000676513 Jy ! Component: 100 - total flux cleaned = -0.000542649 Jy ! Component: 150 - total flux cleaned = -0.000289862 Jy ! Component: 200 - total flux cleaned = -5.27931e-05 Jy ! Total flux subtracted in 200 components = -5.27931e-05 Jy ! Clean residual min=-0.004313 max=0.004319 Jy/beam ! Clean residual mean=0.000050 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 1.43686 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 178 components and 1.43686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182027Jy sigma=0.001180 ! Fit after self-cal, rms=0.181987Jy sigma=0.001180 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.3347e-05 Jy ! Component: 100 - total flux cleaned = 0.000292892 Jy ! Component: 150 - total flux cleaned = 0.000293032 Jy ! Component: 200 - total flux cleaned = 0.000395938 Jy ! Total flux subtracted in 200 components = 0.000395938 Jy ! Clean residual min=-0.004158 max=0.004269 Jy/beam ! Clean residual mean=0.000044 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 1.43725 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 188 components and 1.43725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181857Jy sigma=0.001179 ! Fit after self-cal, rms=0.181835Jy sigma=0.001179 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181835Jy sigma=0.001179 ! Fit after self-cal, rms=0.181653Jy sigma=0.001178 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.795 mas, bmaj=9.55 mas, bpa=-59.94 degrees ! Estimated noise=943.238 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107294 Jy ! Component: 100 - total flux cleaned = -0.000435582 Jy ! Component: 150 - total flux cleaned = -0.000119911 Jy ! Component: 200 - total flux cleaned = 0.000142526 Jy ! Total flux subtracted in 200 components = 0.000142526 Jy ! Clean residual min=-0.004455 max=0.005102 Jy/beam ! Clean residual mean=0.000128 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 1.4374 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 204 components and 1.4374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181593Jy sigma=0.001178 ! Fit after self-cal, rms=0.181557Jy sigma=0.001178 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.52647e-05 Jy ! Component: 100 - total flux cleaned = -5.98533e-05 Jy ! Component: 150 - total flux cleaned = -5.8143e-05 Jy ! Component: 200 - total flux cleaned = -5.70599e-05 Jy ! Total flux subtracted in 200 components = -5.70599e-05 Jy ! Clean residual min=-0.004396 max=0.004916 Jy/beam ! Clean residual mean=0.000131 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 1.43734 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 216 components and 1.43734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181530Jy sigma=0.001177 ! Fit after self-cal, rms=0.181508Jy sigma=0.001177 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=3.996 mas, bpa=2.963 degrees ! Estimated noise=683.459 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.597 x 3.996 at 2.963 degrees (North through East) ! Clean map min=-0.0040644 max=0.63925 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181508Jy sigma=0.001177 ! Fit after self-cal, rms=3.676839Jy sigma=0.001047 ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=3.995 mas, bpa=2.933 degrees ! Estimated noise=683.541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000541326 Jy ! Component: 100 - total flux cleaned = -0.00115056 Jy ! Component: 150 - total flux cleaned = -0.00189624 Jy ! Component: 200 - total flux cleaned = -0.00248772 Jy ! Total flux subtracted in 200 components = -0.00248772 Jy ! Clean residual min=-0.004138 max=0.004653 Jy/beam ! Clean residual mean=0.000076 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 1.43485 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 224 components and 1.43485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.676848Jy sigma=0.001046 ! Fit after self-cal, rms=3.676825Jy sigma=0.001046 ! Inverting map ! Added new window around map position (-13, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228054 Jy ! Component: 100 - total flux cleaned = 0.00172453 Jy ! Component: 150 - total flux cleaned = 0.00143318 Jy ! Component: 200 - total flux cleaned = 0.00115817 Jy ! Total flux subtracted in 200 components = 0.00115817 Jy ! Clean residual min=-0.003968 max=0.004051 Jy/beam ! Clean residual mean=0.000059 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 1.43601 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 235 components and 1.43601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.676835Jy sigma=0.001044 ! Fit after self-cal, rms=3.676851Jy sigma=0.001044 ! Inverting map ! Added new window around map position (116.5, -55). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303115 Jy ! Component: 100 - total flux cleaned = 0.00343144 Jy ! Component: 150 - total flux cleaned = 0.00343104 Jy ! Component: 200 - total flux cleaned = 0.00326237 Jy ! Total flux subtracted in 200 components = 0.00326237 Jy ! Clean residual min=-0.003883 max=0.003837 Jy/beam ! Clean residual mean=0.000040 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 1.43927 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 246 components and 1.43927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.676836Jy sigma=0.001043 ! Fit after self-cal, rms=3.676811Jy sigma=0.001043 ! Inverting map ! Added new window around map position (-53.5, -17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252803 Jy ! Component: 100 - total flux cleaned = 0.00280056 Jy ! Component: 150 - total flux cleaned = 0.00263712 Jy ! Component: 200 - total flux cleaned = 0.00255946 Jy ! Total flux subtracted in 200 components = 0.00255946 Jy ! Clean residual min=-0.003805 max=0.003305 Jy/beam ! Clean residual mean=0.000006 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 1.44183 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 262 components and 1.44183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.676795Jy sigma=0.001042 ! Fit after self-cal, rms=3.676826Jy sigma=0.001042 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.676826Jy sigma=0.001042 ! Fit after self-cal, rms=3.640858Jy sigma=0.001042 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.102 mas, bmaj=3.298 mas, bpa=5.873 degrees ! Estimated noise=1083.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.543907 Jy ! Component: 100 - total flux cleaned = 0.798999 Jy ! Component: 150 - total flux cleaned = 0.952135 Jy ! Component: 200 - total flux cleaned = 1.05226 Jy ! Total flux subtracted in 200 components = 1.05226 Jy ! Clean residual min=-0.013633 max=0.055424 Jy/beam ! Clean residual mean=0.000348 rms=0.004440 Jy/beam ! Combined flux in latest and established models = 1.05226 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 1.05226 Jy ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=4.003 mas, bpa=3.025 degrees ! Estimated noise=683.753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125773 Jy ! Component: 100 - total flux cleaned = 0.199249 Jy ! Component: 150 - total flux cleaned = 0.244377 Jy ! Component: 200 - total flux cleaned = 0.273671 Jy ! Total flux subtracted in 200 components = 0.273671 Jy ! Clean residual min=-0.005651 max=0.018324 Jy/beam ! Clean residual mean=0.001744 rms=0.002288 Jy/beam ! Combined flux in latest and established models = 1.32593 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 87 components and 1.32593 Jy ! Inverting map ! Added new window around map position (-8.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214315 Jy ! Component: 100 - total flux cleaned = 0.0372233 Jy ! Component: 150 - total flux cleaned = 0.0494797 Jy ! Component: 200 - total flux cleaned = 0.059401 Jy ! Total flux subtracted in 200 components = 0.059401 Jy ! Clean residual min=-0.003871 max=0.006491 Jy/beam ! Clean residual mean=0.000837 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 1.38533 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 131 components and 1.38533 Jy ! Inverting map ! Added new window around map position (-16, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00823062 Jy ! Component: 100 - total flux cleaned = 0.015126 Jy ! Component: 150 - total flux cleaned = 0.021134 Jy ! Component: 200 - total flux cleaned = 0.0264406 Jy ! Total flux subtracted in 200 components = 0.0264406 Jy ! Clean residual min=-0.003690 max=0.004409 Jy/beam ! Clean residual mean=0.000453 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 1.41177 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 160 components and 1.41177 Jy ! Inverting map ! Added new window around map position (-29.5, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050546 Jy ! Component: 100 - total flux cleaned = 0.00929737 Jy ! Component: 150 - total flux cleaned = 0.0130942 Jy ! Component: 200 - total flux cleaned = 0.0165238 Jy ! Total flux subtracted in 200 components = 0.0165238 Jy ! Clean residual min=-0.003670 max=0.004023 Jy/beam ! Clean residual mean=0.000219 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 1.42829 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 186 components and 1.42829 Jy ! Inverting map ! Added new window around map position (21.5, 58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351576 Jy ! Component: 100 - total flux cleaned = 0.00554282 Jy ! Component: 150 - total flux cleaned = 0.00731949 Jy ! Component: 200 - total flux cleaned = 0.00847377 Jy ! Total flux subtracted in 200 components = 0.00847377 Jy ! Clean residual min=-0.003633 max=0.003427 Jy/beam ! Clean residual mean=0.000099 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 1.43677 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 211 components and 1.43677 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.798 mas, bmaj=9.554 mas, bpa=-59.92 degrees ! Estimated noise=941.749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349737 Jy ! Component: 100 - total flux cleaned = 0.00554578 Jy ! Component: 150 - total flux cleaned = 0.00667803 Jy ! Component: 200 - total flux cleaned = 0.0076725 Jy ! Total flux subtracted in 200 components = 0.0076725 Jy ! Clean residual min=-0.003617 max=0.003476 Jy/beam ! Clean residual mean=-0.000023 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 1.44444 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000818851 Jy ! Component: 100 - total flux cleaned = 0.00121676 Jy ! Component: 150 - total flux cleaned = 0.0015303 Jy ! Component: 200 - total flux cleaned = 0.00182231 Jy ! Total flux subtracted in 200 components = 0.00182231 Jy ! Clean residual min=-0.003619 max=0.003313 Jy/beam ! Clean residual mean=-0.000094 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 1.44626 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 265 components and 1.44626 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=4.003 mas, bpa=3.025 degrees ! Estimated noise=683.753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014247 Jy ! Component: 100 - total flux cleaned = -0.00190475 Jy ! Component: 150 - total flux cleaned = -0.00199631 Jy ! Component: 200 - total flux cleaned = -0.00191107 Jy ! Total flux subtracted in 200 components = -0.00191107 Jy ! Clean residual min=-0.003663 max=0.003367 Jy/beam ! Clean residual mean=-0.000009 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 1.44435 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 281 components and 1.44435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.640879Jy sigma=0.001041 ! Fit after self-cal, rms=3.640918Jy sigma=0.001040 wmodel J0423+4150_S_2009_05_13_pus_map.mod ! Writing 281 model components to file: J0423+4150_S_2009_05_13_pus_map.mod wobs J0423+4150_S_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0423+4150_S_2009_05_13_pus_uvs.fits wwins J0423+4150_S_2009_05_13_pus_map.win ! wwins: Wrote 14 windows to J0423+4150_S_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000543242 Jy ! Component: 100 - total flux cleaned = -0.000669776 Jy ! Component: 150 - total flux cleaned = -0.000611499 Jy ! Component: 200 - total flux cleaned = -0.000611039 Jy ! Component: 250 - total flux cleaned = -0.000554205 Jy ! Component: 300 - total flux cleaned = -0.000608121 Jy ! Component: 350 - total flux cleaned = -0.000553185 Jy ! Component: 400 - total flux cleaned = -0.000552558 Jy ! Component: 450 - total flux cleaned = -0.000552016 Jy ! Component: 500 - total flux cleaned = -0.00039747 Jy ! Component: 550 - total flux cleaned = -0.000398162 Jy ! Component: 600 - total flux cleaned = -0.000348574 Jy ! Component: 650 - total flux cleaned = -0.000398661 Jy ! Component: 700 - total flux cleaned = -0.00044761 Jy ! Component: 750 - total flux cleaned = -0.000399133 Jy ! Component: 800 - total flux cleaned = -0.000447332 Jy ! Component: 850 - total flux cleaned = -0.000495158 Jy ! Component: 900 - total flux cleaned = -0.00054247 Jy ! Component: 950 - total flux cleaned = -0.000542583 Jy ! Component: 1000 - total flux cleaned = -0.000496049 Jy ! Component: 1050 - total flux cleaned = -0.00063473 Jy ! Component: 1100 - total flux cleaned = -0.000634409 Jy ! Component: 1150 - total flux cleaned = -0.000634537 Jy ! Component: 1200 - total flux cleaned = -0.000724766 Jy ! Component: 1250 - total flux cleaned = -0.000679842 Jy ! Component: 1300 - total flux cleaned = -0.000724034 Jy ! Component: 1350 - total flux cleaned = -0.000635516 Jy ! Component: 1400 - total flux cleaned = -0.000679601 Jy ! Component: 1450 - total flux cleaned = -0.00067945 Jy ! Component: 1500 - total flux cleaned = -0.000722745 Jy ! Component: 1550 - total flux cleaned = -0.000679578 Jy ! Component: 1600 - total flux cleaned = -0.000679516 Jy ! Component: 1650 - total flux cleaned = -0.00063709 Jy ! Component: 1700 - total flux cleaned = -0.000679395 Jy ! Component: 1750 - total flux cleaned = -0.000679661 Jy ! Component: 1800 - total flux cleaned = -0.000721534 Jy ! Component: 1850 - total flux cleaned = -0.000680233 Jy ! Component: 1900 - total flux cleaned = -0.0007217 Jy ! Component: 1950 - total flux cleaned = -0.000680721 Jy ! Component: 2000 - total flux cleaned = -0.000681111 Jy ! Component: 2050 - total flux cleaned = -0.000762674 Jy ! Component: 2100 - total flux cleaned = -0.000762682 Jy ! Component: 2150 - total flux cleaned = -0.000883188 Jy ! Component: 2200 - total flux cleaned = -0.000842985 Jy ! Component: 2250 - total flux cleaned = -0.000842993 Jy ! Component: 2300 - total flux cleaned = -0.000882468 Jy ! Component: 2350 - total flux cleaned = -0.000803789 Jy ! Component: 2400 - total flux cleaned = -0.000843281 Jy ! Component: 2450 - total flux cleaned = -0.000921645 Jy ! Component: 2500 - total flux cleaned = -0.000960519 Jy ! Component: 2550 - total flux cleaned = -0.000999226 Jy ! Component: 2600 - total flux cleaned = -0.000999056 Jy ! Component: 2650 - total flux cleaned = -0.00103749 Jy ! Component: 2700 - total flux cleaned = -0.00103731 Jy ! Component: 2750 - total flux cleaned = -0.00111318 Jy ! Component: 2800 - total flux cleaned = -0.00111324 Jy ! Component: 2850 - total flux cleaned = -0.00111331 Jy ! Component: 2900 - total flux cleaned = -0.00111329 Jy ! Component: 2950 - total flux cleaned = -0.00115065 Jy ! Component: 3000 - total flux cleaned = -0.00115074 Jy ! Component: 3050 - total flux cleaned = -0.00122469 Jy ! Component: 3100 - total flux cleaned = -0.00122474 Jy ! Component: 3150 - total flux cleaned = -0.00126146 Jy ! Component: 3200 - total flux cleaned = -0.00122482 Jy ! Component: 3250 - total flux cleaned = -0.00122491 Jy ! Component: 3300 - total flux cleaned = -0.00129747 Jy ! Component: 3350 - total flux cleaned = -0.00136964 Jy ! Component: 3400 - total flux cleaned = -0.0013337 Jy ! Component: 3450 - total flux cleaned = -0.00136943 Jy ! Component: 3500 - total flux cleaned = -0.00144076 Jy ! Component: 3550 - total flux cleaned = -0.00140519 Jy ! Component: 3600 - total flux cleaned = -0.00140515 Jy ! Component: 3650 - total flux cleaned = -0.00144037 Jy ! Component: 3700 - total flux cleaned = -0.00144039 Jy ! Component: 3750 - total flux cleaned = -0.00140546 Jy ! Component: 3800 - total flux cleaned = -0.00151008 Jy ! Component: 3850 - total flux cleaned = -0.00157954 Jy ! Component: 3900 - total flux cleaned = -0.00157952 Jy ! Component: 3950 - total flux cleaned = -0.00161395 Jy ! Component: 4000 - total flux cleaned = -0.00157967 Jy ! Component: 4050 - total flux cleaned = -0.00161392 Jy ! Total flux subtracted in 4096 components = -0.00161383 Jy ! Clean residual min=-0.001847 max=0.002012 Jy/beam ! Clean residual mean=-0.000016 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.44274 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 590 components and 1.44274 Jy ![Exited script file: muppet] wmap "J0423+4150_S_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.598 x 4.003 at 3.025 degrees (North through East) ! Clean map min=-0.0033835 max=0.63848 Jy/beam ! Writing clean map to FITS file: J0423+4150_S_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.638483 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000593457 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.278844 0.278844 0.557688 1.11538 2.23075 4.46151 8.92301 17.846 35.6921 71.3841 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.638 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.598 x 4.003 at 3.025 degrees (North through East) ! Clean map min=-0.0033835 max=0.63848 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0423+4150_S_2009_05_13_pus_uvs.log closed on Sun Jan 22 11:32:59 2017