! Started logfile: J0349-2102_S_2009_05_13_pus_uvs.log on Sun Jan 22 11:32:46 2017 obs J0349-2102_S_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0349-2102_S_2009_05_13_pus_uva.fits ! AN table 1: 40 integrations on 120 of 120 possible baselines. ! AN table 2: 21 integrations on 120 of 120 possible baselines. ! AN table 3: 29 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.189815 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0349-2102 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1341 lines of history. ! ! Reading 8200 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0349-2102_S_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 333 telescope corrections were flagged in sub-array 1. ! A total of 297 telescope corrections were flagged in sub-array 2. ! A total of 258 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 333 telescope corrections were flagged in sub-array 1. ! A total of 297 telescope corrections were flagged in sub-array 2. ! A total of 258 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 333 telescope corrections were flagged in sub-array 1. ! A total of 297 telescope corrections were flagged in sub-array 2. ! A total of 258 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 333 telescope corrections were flagged in sub-array 1. ! A total of 297 telescope corrections were flagged in sub-array 2. ! A total of 258 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.631630Jy sigma=0.004039 ! Fit after self-cal, rms=0.587568Jy sigma=0.003842 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.428 mas, bmaj=4.991 mas, bpa=-25.05 degrees ! Estimated noise=1809.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.347148 Jy ! Component: 100 - total flux cleaned = 0.42285 Jy ! Total flux subtracted in 100 components = 0.42285 Jy ! Clean residual min=-0.009808 max=0.021158 Jy/beam ! Clean residual mean=-0.000006 rms=0.002642 Jy/beam ! Combined flux in latest and established models = 0.42285 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.42285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209909Jy sigma=0.001140 ! Fit after self-cal, rms=0.209880Jy sigma=0.001140 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212312 Jy ! Component: 100 - total flux cleaned = 0.0277947 Jy ! Total flux subtracted in 100 components = 0.0277947 Jy ! Clean residual min=-0.009231 max=0.010524 Jy/beam ! Clean residual mean=-0.000000 rms=0.002311 Jy/beam ! Combined flux in latest and established models = 0.450644 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.450644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207452Jy sigma=0.001124 ! Fit after self-cal, rms=0.207424Jy sigma=0.001124 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=6.206 mas, bpa=-24.33 degrees ! Estimated noise=1211.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665635 Jy ! Component: 100 - total flux cleaned = 0.00666534 Jy ! Component: 150 - total flux cleaned = 0.00692307 Jy ! Component: 200 - total flux cleaned = 0.0071535 Jy ! Total flux subtracted in 200 components = 0.0071535 Jy ! Clean residual min=-0.006133 max=0.007442 Jy/beam ! Clean residual mean=-0.000020 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.457798 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.457798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206520Jy sigma=0.001120 ! Fit after self-cal, rms=0.206538Jy sigma=0.001120 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.07 HO 0.85 ! KK 0.98 KP 1.00 LA 0.99 MK 0.99 ! NL 1.03 NY 1.00* OV 1.00 PT 0.99 ! SC 1.01 TS 1.00* WZ 1.00* KB 1.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.00 HN 1.08 HO 1.00* ! KK 1.00* KP 0.98 LA 0.96 MK 1.00* ! NL 1.06 NY 1.00* OV 1.00 PT 1.03 ! SC 0.98 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.04 HO 0.89 ! KK 1.08 KP 1.00 LA 1.02 MK 0.99 ! NL 1.00 NY 1.00* OV 0.99 PT 0.99 ! SC 1.03 TS 1.00* WZ 1.00* KB 1.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.92 HN 1.07 HO 1.00* ! KK 1.00* KP 0.99 LA 0.98 MK 1.00* ! NL 1.06 NY 1.00* OV 1.00 PT 1.00 ! SC 1.02 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.00 HO 0.86 ! KK 1.05 KP 1.02 LA 1.00 MK 1.04 ! NL 1.03 NY 1.00* OV 1.03 PT 0.98 ! SC 0.97 TS 1.00* WZ 1.00* KB 1.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 FD 0.94 HN 1.08 HO 1.00* ! KK 1.00* KP 1.01 LA 0.96 MK 1.00* ! NL 1.01 NY 1.00* OV 1.05 PT 0.99 ! SC 1.00 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.96 HO 0.82 ! KK 1.02 KP 0.99 LA 0.98 MK 0.99 ! NL 1.04 NY 1.00* OV 1.01 PT 1.00 ! SC 1.04 TS 1.00* WZ 1.00* KB 1.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.71 FD 0.95 HN 0.98 HO 1.00* ! KK 1.00* KP 0.96 LA 0.97 MK 1.00* ! NL 1.00 NY 1.00* OV 1.03 PT 1.01 ! SC 1.01 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Fit before self-cal, rms=0.206538Jy sigma=0.001120 ! Fit after self-cal, rms=0.200253Jy sigma=0.001108 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=6.141 mas, bpa=-25.11 degrees ! Estimated noise=1209.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140421 Jy ! Component: 100 - total flux cleaned = -0.00151423 Jy ! Component: 150 - total flux cleaned = -0.00152006 Jy ! Component: 200 - total flux cleaned = -0.00148297 Jy ! Total flux subtracted in 200 components = -0.00148297 Jy ! Clean residual min=-0.005547 max=0.005293 Jy/beam ! Clean residual mean=-0.000014 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.456315 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 19 components and 0.456315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200217Jy sigma=0.001108 ! Fit after self-cal, rms=0.200225Jy sigma=0.001108 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200225Jy sigma=0.001108 ! Fit after self-cal, rms=0.200764Jy sigma=0.001105 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=6.135 mas, bpa=-25.24 degrees ! Estimated noise=1209.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00061113 Jy ! Component: 100 - total flux cleaned = -0.000572628 Jy ! Component: 150 - total flux cleaned = -0.00057102 Jy ! Component: 200 - total flux cleaned = -0.000541641 Jy ! Total flux subtracted in 200 components = -0.000541641 Jy ! Clean residual min=-0.005180 max=0.004947 Jy/beam ! Clean residual mean=-0.000022 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.455773 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.455773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200747Jy sigma=0.001105 ! Fit after self-cal, rms=0.200732Jy sigma=0.001105 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.17864e-05 Jy ! Component: 100 - total flux cleaned = 6.14752e-05 Jy ! Component: 150 - total flux cleaned = 6.39254e-05 Jy ! Component: 200 - total flux cleaned = 8.9322e-05 Jy ! Total flux subtracted in 200 components = 8.9322e-05 Jy ! Clean residual min=-0.005203 max=0.004952 Jy/beam ! Clean residual mean=-0.000022 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.455862 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.455862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200724Jy sigma=0.001105 ! Fit after self-cal, rms=0.200722Jy sigma=0.001105 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200722Jy sigma=0.001105 ! Fit after self-cal, rms=0.201021Jy sigma=0.001105 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=6.128 mas, bpa=-25.34 degrees ! Estimated noise=1209.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260047 Jy ! Component: 100 - total flux cleaned = -0.000230538 Jy ! Component: 150 - total flux cleaned = -0.000201281 Jy ! Component: 200 - total flux cleaned = -0.000172267 Jy ! Total flux subtracted in 200 components = -0.000172267 Jy ! Clean residual min=-0.005121 max=0.004803 Jy/beam ! Clean residual mean=-0.000026 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 0.45569 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.45569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201010Jy sigma=0.001104 ! Fit after self-cal, rms=0.200993Jy sigma=0.001104 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.60049e-05 Jy ! Component: 100 - total flux cleaned = 5.65161e-05 Jy ! Component: 150 - total flux cleaned = 7.98901e-05 Jy ! Component: 200 - total flux cleaned = 0.00010321 Jy ! Total flux subtracted in 200 components = 0.00010321 Jy ! Clean residual min=-0.005102 max=0.004803 Jy/beam ! Clean residual mean=-0.000026 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 0.455793 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.455793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200986Jy sigma=0.001104 ! Fit after self-cal, rms=0.200986Jy sigma=0.001104 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200986Jy sigma=0.001104 ! Fit after self-cal, rms=0.200900Jy sigma=0.001104 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.194 mas, bmaj=16.94 mas, bpa=-0.9333 degrees ! Estimated noise=1459.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128505 Jy ! Component: 100 - total flux cleaned = 0.00012918 Jy ! Component: 150 - total flux cleaned = 0.000128573 Jy ! Component: 200 - total flux cleaned = 0.000128622 Jy ! Total flux subtracted in 200 components = 0.000128622 Jy ! Clean residual min=-0.005425 max=0.004816 Jy/beam ! Clean residual mean=-0.000053 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.455922 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.455922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200898Jy sigma=0.001104 ! Fit after self-cal, rms=0.200898Jy sigma=0.001104 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.96319e-05 Jy ! Component: 100 - total flux cleaned = 5.90105e-05 Jy ! Component: 150 - total flux cleaned = 5.92411e-05 Jy ! Component: 200 - total flux cleaned = 6.59922e-05 Jy ! Total flux subtracted in 200 components = 6.59922e-05 Jy ! Clean residual min=-0.005428 max=0.004816 Jy/beam ! Clean residual mean=-0.000053 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.455988 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.455988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200897Jy sigma=0.001104 ! Fit after self-cal, rms=0.200897Jy sigma=0.001104 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=6.122 mas, bpa=-25.42 degrees ! Estimated noise=1209.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.002 x 6.122 at -25.42 degrees (North through East) ! Clean map min=-0.0049416 max=0.43763 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=4.887 mas, bpa=-26.57 degrees ! Estimated noise=1797.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.342948 Jy ! Component: 100 - total flux cleaned = 0.417735 Jy ! Component: 150 - total flux cleaned = 0.436147 Jy ! Component: 200 - total flux cleaned = 0.445017 Jy ! Total flux subtracted in 200 components = 0.445017 Jy ! Clean residual min=-0.007711 max=0.007763 Jy/beam ! Clean residual mean=-0.000006 rms=0.001798 Jy/beam ! Combined flux in latest and established models = 0.445017 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.445017 Jy ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=6.122 mas, bpa=-25.42 degrees ! Estimated noise=1209.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00635881 Jy ! Component: 100 - total flux cleaned = 0.00909547 Jy ! Component: 150 - total flux cleaned = 0.00936494 Jy ! Component: 200 - total flux cleaned = 0.00948408 Jy ! Total flux subtracted in 200 components = 0.00948408 Jy ! Clean residual min=-0.005142 max=0.004830 Jy/beam ! Clean residual mean=-0.000024 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.454501 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.454501 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.194 mas, bmaj=16.94 mas, bpa=-0.9333 degrees ! Estimated noise=1459.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000973388 Jy ! Component: 100 - total flux cleaned = 0.0011088 Jy ! Component: 150 - total flux cleaned = 0.00113307 Jy ! Component: 200 - total flux cleaned = 0.00116735 Jy ! Total flux subtracted in 200 components = 0.00116735 Jy ! Clean residual min=-0.005441 max=0.004834 Jy/beam ! Clean residual mean=-0.000051 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.455669 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.13643e-05 Jy ! Component: 100 - total flux cleaned = 5.0354e-05 Jy ! Component: 150 - total flux cleaned = 7.76033e-05 Jy ! Component: 200 - total flux cleaned = 9.4454e-05 Jy ! Total flux subtracted in 200 components = 9.4454e-05 Jy ! Clean residual min=-0.005444 max=0.004826 Jy/beam ! Clean residual mean=-0.000052 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 0.455763 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.455763 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=6.122 mas, bpa=-25.42 degrees ! Estimated noise=1209.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186517 Jy ! Component: 100 - total flux cleaned = -0.000243196 Jy ! Component: 150 - total flux cleaned = -0.000340734 Jy ! Component: 200 - total flux cleaned = -0.000344398 Jy ! Total flux subtracted in 200 components = -0.000344398 Jy ! Clean residual min=-0.005147 max=0.004800 Jy/beam ! Clean residual mean=-0.000026 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.455419 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 0.455419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200961Jy sigma=0.001105 ! Fit after self-cal, rms=0.200967Jy sigma=0.001105 wmodel J0349-2102_S_2009_05_13_pus_map.mod ! Writing 26 model components to file: J0349-2102_S_2009_05_13_pus_map.mod wobs J0349-2102_S_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0349-2102_S_2009_05_13_pus_uvs.fits wwins J0349-2102_S_2009_05_13_pus_map.win ! wwins: Wrote 1 windows to J0349-2102_S_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000680357 Jy ! Component: 100 - total flux cleaned = -0.0010275 Jy ! Component: 150 - total flux cleaned = -0.00177835 Jy ! Component: 200 - total flux cleaned = -0.0024255 Jy ! Component: 250 - total flux cleaned = -0.00265942 Jy ! Component: 300 - total flux cleaned = -0.00250622 Jy ! Component: 350 - total flux cleaned = -0.00250704 Jy ! Component: 400 - total flux cleaned = -0.00250681 Jy ! Component: 450 - total flux cleaned = -0.00243357 Jy ! Component: 500 - total flux cleaned = -0.00236277 Jy ! Component: 550 - total flux cleaned = -0.00236198 Jy ! Component: 600 - total flux cleaned = -0.00208378 Jy ! Component: 650 - total flux cleaned = -0.00201545 Jy ! Component: 700 - total flux cleaned = -0.00161204 Jy ! Component: 750 - total flux cleaned = -0.00141328 Jy ! Component: 800 - total flux cleaned = -0.00128097 Jy ! Component: 850 - total flux cleaned = -0.000760271 Jy ! Component: 900 - total flux cleaned = -0.000438987 Jy ! Component: 950 - total flux cleaned = -5.91845e-05 Jy ! Component: 1000 - total flux cleaned = 0.000128007 Jy ! Component: 1050 - total flux cleaned = 0.000251911 Jy ! Component: 1100 - total flux cleaned = 0.000436584 Jy ! Component: 1150 - total flux cleaned = 0.000741691 Jy ! Component: 1200 - total flux cleaned = 0.000982502 Jy ! Component: 1250 - total flux cleaned = 0.00116221 Jy ! Component: 1300 - total flux cleaned = 0.00151698 Jy ! Component: 1350 - total flux cleaned = 0.0018689 Jy ! Component: 1400 - total flux cleaned = 0.00192764 Jy ! Component: 1450 - total flux cleaned = 0.00215777 Jy ! Component: 1500 - total flux cleaned = 0.00233025 Jy ! Component: 1550 - total flux cleaned = 0.00255739 Jy ! Component: 1600 - total flux cleaned = 0.00289518 Jy ! Component: 1650 - total flux cleaned = 0.00311756 Jy ! Component: 1700 - total flux cleaned = 0.00322723 Jy ! Component: 1750 - total flux cleaned = 0.00339214 Jy ! Component: 1800 - total flux cleaned = 0.00361011 Jy ! Component: 1850 - total flux cleaned = 0.00361078 Jy ! Component: 1900 - total flux cleaned = 0.00393295 Jy ! Component: 1950 - total flux cleaned = 0.00430528 Jy ! Component: 2000 - total flux cleaned = 0.00430558 Jy ! Component: 2050 - total flux cleaned = 0.00451522 Jy ! Component: 2100 - total flux cleaned = 0.00477513 Jy ! Component: 2150 - total flux cleaned = 0.00492949 Jy ! Component: 2200 - total flux cleaned = 0.00487802 Jy ! Component: 2250 - total flux cleaned = 0.00533565 Jy ! Component: 2300 - total flux cleaned = 0.00503265 Jy ! Component: 2350 - total flux cleaned = 0.00513277 Jy ! Component: 2400 - total flux cleaned = 0.00513276 Jy ! Component: 2450 - total flux cleaned = 0.00528151 Jy ! Component: 2500 - total flux cleaned = 0.00533022 Jy ! Component: 2550 - total flux cleaned = 0.00547669 Jy ! Component: 2600 - total flux cleaned = 0.00542789 Jy ! Component: 2650 - total flux cleaned = 0.00566862 Jy ! Component: 2700 - total flux cleaned = 0.00576418 Jy ! Component: 2750 - total flux cleaned = 0.00585953 Jy ! Component: 2800 - total flux cleaned = 0.005954 Jy ! Component: 2850 - total flux cleaned = 0.00586029 Jy ! Component: 2900 - total flux cleaned = 0.00595309 Jy ! Component: 2950 - total flux cleaned = 0.00613889 Jy ! Component: 3000 - total flux cleaned = 0.00604698 Jy ! Component: 3050 - total flux cleaned = 0.00641374 Jy ! Component: 3100 - total flux cleaned = 0.00650466 Jy ! Component: 3150 - total flux cleaned = 0.00650459 Jy ! Component: 3200 - total flux cleaned = 0.006684 Jy ! Component: 3250 - total flux cleaned = 0.00659426 Jy ! Component: 3300 - total flux cleaned = 0.00681666 Jy ! Component: 3350 - total flux cleaned = 0.00690448 Jy ! Component: 3400 - total flux cleaned = 0.00707991 Jy ! Component: 3450 - total flux cleaned = 0.00734137 Jy ! Component: 3500 - total flux cleaned = 0.0073848 Jy ! Component: 3550 - total flux cleaned = 0.00747138 Jy ! Component: 3600 - total flux cleaned = 0.00751412 Jy ! Component: 3650 - total flux cleaned = 0.00776966 Jy ! Component: 3700 - total flux cleaned = 0.00781193 Jy ! Component: 3750 - total flux cleaned = 0.00789646 Jy ! Component: 3800 - total flux cleaned = 0.00802206 Jy ! Component: 3850 - total flux cleaned = 0.00810548 Jy ! Component: 3900 - total flux cleaned = 0.00839555 Jy ! Component: 3950 - total flux cleaned = 0.00847742 Jy ! Component: 4000 - total flux cleaned = 0.00851839 Jy ! Component: 4050 - total flux cleaned = 0.00876208 Jy ! Total flux subtracted in 4096 components = 0.00896437 Jy ! Clean residual min=-0.002357 max=0.002271 Jy/beam ! Clean residual mean=0.000001 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.464383 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 312 components and 0.464383 Jy ![Exited script file: muppet] wmap "J0349-2102_S_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.002 x 6.122 at -25.42 degrees (North through East) ! Clean map min=-0.0037102 max=0.43597 Jy/beam ! Writing clean map to FITS file: J0349-2102_S_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.43597 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000745824 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.513217 0.513217 1.02643 2.05287 4.10574 8.21147 16.4229 32.8459 65.6918 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.435 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.002 x 6.122 at -25.42 degrees (North through East) ! Clean map min=-0.0037102 max=0.43597 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0349-2102_S_2009_05_13_pus_uvs.log closed on Sun Jan 22 11:32:51 2017