! Started logfile: J0136+4751_S_2009_05_13_pus_uvs.log on Sun Jan 22 11:31:53 2017 obs J0136+4751_S_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0136+4751_S_2009_05_13_pus_uva.fits ! AN table 1: 40 integrations on 120 of 120 possible baselines. ! AN table 2: 78 integrations on 120 of 120 possible baselines. ! AN table 3: 90 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.39355 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1341 lines of history. ! ! Reading 39292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0136+4751_S_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 265 telescope corrections were flagged in sub-array 1. ! A total of 170 telescope corrections were flagged in sub-array 2. ! A total of 1010 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 265 telescope corrections were flagged in sub-array 1. ! A total of 170 telescope corrections were flagged in sub-array 2. ! A total of 1010 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 265 telescope corrections were flagged in sub-array 1. ! A total of 170 telescope corrections were flagged in sub-array 2. ! A total of 1010 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 265 telescope corrections were flagged in sub-array 1. ! A total of 170 telescope corrections were flagged in sub-array 2. ! A total of 1010 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.817159Jy sigma=0.015218 ! Fit after self-cal, rms=1.477026Jy sigma=0.012252 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.97 mas, bmaj=2.749 mas, bpa=0.6447 degrees ! Estimated noise=965.216 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.71791 Jy ! Component: 100 - total flux cleaned = 2.19897 Jy ! Total flux subtracted in 100 components = 2.19897 Jy ! Clean residual min=-0.040159 max=0.213004 Jy/beam ! Clean residual mean=0.000842 rms=0.011334 Jy/beam ! Combined flux in latest and established models = 2.19897 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.19897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.545591Jy sigma=0.004507 ! Fit after self-cal, rms=0.542952Jy sigma=0.004500 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.244174 Jy ! Component: 100 - total flux cleaned = 0.392035 Jy ! Total flux subtracted in 100 components = 0.392035 Jy ! Clean residual min=-0.023662 max=0.087268 Jy/beam ! Clean residual mean=0.000492 rms=0.006607 Jy/beam ! Combined flux in latest and established models = 2.591 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 2.591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343194Jy sigma=0.002666 ! Fit after self-cal, rms=0.338807Jy sigma=0.002646 ! Inverting map ! Added new window around map position (-1.5, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112577 Jy ! Component: 100 - total flux cleaned = 0.189898 Jy ! Total flux subtracted in 100 components = 0.189898 Jy ! Clean residual min=-0.019698 max=0.044275 Jy/beam ! Clean residual mean=0.000323 rms=0.004785 Jy/beam ! Combined flux in latest and established models = 2.7809 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 2.7809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274016Jy sigma=0.001983 ! Fit after self-cal, rms=0.271088Jy sigma=0.001967 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0632483 Jy ! Component: 100 - total flux cleaned = 0.10731 Jy ! Total flux subtracted in 100 components = 0.10731 Jy ! Clean residual min=-0.018954 max=0.028184 Jy/beam ! Clean residual mean=0.000227 rms=0.004004 Jy/beam ! Combined flux in latest and established models = 2.88821 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 2.88821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247020Jy sigma=0.001694 ! Fit after self-cal, rms=0.245568Jy sigma=0.001686 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371819 Jy ! Component: 100 - total flux cleaned = 0.0633901 Jy ! Total flux subtracted in 100 components = 0.0633901 Jy ! Clean residual min=-0.018187 max=0.024695 Jy/beam ! Clean residual mean=0.000171 rms=0.003684 Jy/beam ! Combined flux in latest and established models = 2.9516 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 2.9516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236785Jy sigma=0.001576 ! Fit after self-cal, rms=0.236142Jy sigma=0.001572 ! Inverting map ! Added new window around map position (-5, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257772 Jy ! Component: 100 - total flux cleaned = 0.0437959 Jy ! Total flux subtracted in 100 components = 0.0437959 Jy ! Clean residual min=-0.017260 max=0.020973 Jy/beam ! Clean residual mean=0.000132 rms=0.003529 Jy/beam ! Combined flux in latest and established models = 2.9954 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 2.9954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232612Jy sigma=0.001526 ! Fit after self-cal, rms=0.232288Jy sigma=0.001523 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.355 mas, bmaj=3.134 mas, bpa=-0.3823 degrees ! Estimated noise=478.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307814 Jy ! Component: 100 - total flux cleaned = 0.0500945 Jy ! Component: 150 - total flux cleaned = 0.0635582 Jy ! Component: 200 - total flux cleaned = 0.0732747 Jy ! Total flux subtracted in 200 components = 0.0732747 Jy ! Clean residual min=-0.013722 max=0.016890 Jy/beam ! Clean residual mean=0.000293 rms=0.003393 Jy/beam ! Combined flux in latest and established models = 3.06867 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 82 components and 3.06867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228895Jy sigma=0.001472 ! Fit after self-cal, rms=0.228650Jy sigma=0.001470 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.03 HO 1.00* ! KK 1.12 KP 0.99 LA 0.96 MK 1.02 ! NL 0.99 NY 1.02 OV 1.01 PT 1.00 ! SC 0.98 TS 1.42 WZ 1.01 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 1.04 HO 1.00* ! KK 1.01 KP 1.06 LA 0.96 MK 1.00 ! NL 0.98 NY 1.01 OV 1.00 PT 1.00 ! SC 1.00 TS 1.01 WZ 1.07 KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 HN 1.03 HO 1.00* ! KK 1.03 KP 0.99 LA 0.96 MK 1.01 ! NL 0.99 NY 1.03 OV 1.01 PT 1.00 ! SC 0.98 TS 0.98 WZ 1.01 KB 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.00 HO 1.00* ! KK 1.06 KP 1.03 LA 0.99 MK 1.03 ! NL 1.02 NY 0.99 OV 0.99 PT 1.00 ! SC 1.02 TS 1.22 WZ 0.98 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.96 HN 1.01 HO 1.00* ! KK 1.04 KP 1.03 LA 0.99 MK 1.01 ! NL 1.03 NY 0.98 OV 1.00 PT 1.00 ! SC 1.04 TS 0.98 WZ 1.05 KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.96 HN 1.01 HO 1.00* ! KK 1.07 KP 1.03 LA 0.98 MK 1.01 ! NL 1.01 NY 1.00 OV 0.98 PT 0.98 ! SC 1.02 TS 0.97 WZ 1.00 KB 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 1.00 HO 1.00* ! KK 1.02 KP 1.02 LA 0.99 MK 1.02 ! NL 0.98 NY 0.99 OV 1.06 PT 1.00 ! SC 0.97 TS 1.34 WZ 0.98 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.96 HN 0.99 HO 1.00* ! KK 1.00 KP 1.02 LA 0.99 MK 1.01 ! NL 0.99 NY 0.96 OV 1.05 PT 0.99 ! SC 1.01 TS 1.01 WZ 1.02 KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.96 HN 0.99 HO 1.00* ! KK 1.00 KP 1.01 LA 0.99 MK 1.04 ! NL 0.97 NY 1.00 OV 1.07 PT 1.00 ! SC 0.98 TS 1.01 WZ 1.01 KB 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.96 HO 1.00* ! KK 1.03 KP 0.99 LA 0.98 MK 1.00 ! NL 0.99 NY 1.01 OV 0.98 PT 0.99 ! SC 0.95 TS 1.31 WZ 0.95 KB 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 0.95 HO 1.00* ! KK 1.05 KP 0.98 LA 1.00 MK 0.98 ! NL 0.99 NY 0.96 OV 0.99 PT 1.00 ! SC 0.98 TS 1.00 WZ 1.00 KB 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.16 FD 0.99 HN 0.95 HO 1.00* ! KK 1.05 KP 1.00 LA 0.98 MK 0.98 ! NL 0.98 NY 0.99 OV 0.99 PT 0.98 ! SC 0.93 TS 0.99 WZ 0.99 KB 1.01 ! ! ! Fit before self-cal, rms=0.228650Jy sigma=0.001470 ! Fit after self-cal, rms=0.205713Jy sigma=0.001235 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.364 mas, bmaj=3.154 mas, bpa=-0.3422 degrees ! Estimated noise=478.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00538649 Jy ! Component: 100 - total flux cleaned = 0.00883988 Jy ! Component: 150 - total flux cleaned = 0.0102543 Jy ! Component: 200 - total flux cleaned = 0.0114519 Jy ! Total flux subtracted in 200 components = 0.0114519 Jy ! Clean residual min=-0.005954 max=0.008209 Jy/beam ! Clean residual mean=0.000107 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 3.08012 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 103 components and 3.08012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204468Jy sigma=0.001224 ! Fit after self-cal, rms=0.204399Jy sigma=0.001224 ! Inverting map ! Added new window around map position (7, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450774 Jy ! Component: 100 - total flux cleaned = 0.00586547 Jy ! Component: 150 - total flux cleaned = 0.00724106 Jy ! Component: 200 - total flux cleaned = 0.00811529 Jy ! Total flux subtracted in 200 components = 0.00811529 Jy ! Clean residual min=-0.005619 max=0.006259 Jy/beam ! Clean residual mean=0.000075 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 3.08824 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 3.08824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203875Jy sigma=0.001219 ! Fit after self-cal, rms=0.203836Jy sigma=0.001219 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203836Jy sigma=0.001219 ! Fit after self-cal, rms=0.200168Jy sigma=0.001186 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.364 mas, bmaj=3.156 mas, bpa=-0.4371 degrees ! Estimated noise=478.179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362447 Jy ! Component: 100 - total flux cleaned = 0.00507859 Jy ! Component: 150 - total flux cleaned = 0.00552554 Jy ! Component: 200 - total flux cleaned = 0.00552535 Jy ! Total flux subtracted in 200 components = 0.00552535 Jy ! Clean residual min=-0.004018 max=0.005156 Jy/beam ! Clean residual mean=0.000057 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 3.09376 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 134 components and 3.09376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199873Jy sigma=0.001183 ! Fit after self-cal, rms=0.199844Jy sigma=0.001183 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041764 Jy ! Component: 100 - total flux cleaned = 0.0052264 Jy ! Component: 150 - total flux cleaned = 0.00499739 Jy ! Component: 200 - total flux cleaned = 0.00489103 Jy ! Total flux subtracted in 200 components = 0.00489103 Jy ! Clean residual min=-0.004149 max=0.004083 Jy/beam ! Clean residual mean=0.000037 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 3.09866 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 147 components and 3.09866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199635Jy sigma=0.001181 ! Fit after self-cal, rms=0.199611Jy sigma=0.001181 ! Inverting map ! Added new window around map position (-10, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344033 Jy ! Component: 100 - total flux cleaned = 0.00486736 Jy ! Component: 150 - total flux cleaned = 0.00557453 Jy ! Component: 200 - total flux cleaned = 0.0062095 Jy ! Total flux subtracted in 200 components = 0.0062095 Jy ! Clean residual min=-0.004067 max=0.003875 Jy/beam ! Clean residual mean=0.000012 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 3.10487 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 166 components and 3.10487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199487Jy sigma=0.001179 ! Fit after self-cal, rms=0.199468Jy sigma=0.001179 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199468Jy sigma=0.001179 ! Fit after self-cal, rms=0.197776Jy sigma=0.001167 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.365 mas, bmaj=3.158 mas, bpa=-0.4452 degrees ! Estimated noise=478.259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287377 Jy ! Component: 100 - total flux cleaned = 0.000600481 Jy ! Component: 150 - total flux cleaned = 0.00120237 Jy ! Component: 200 - total flux cleaned = 0.00183552 Jy ! Total flux subtracted in 200 components = 0.00183552 Jy ! Clean residual min=-0.003238 max=0.003570 Jy/beam ! Clean residual mean=0.000056 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 3.1067 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 176 components and 3.1067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197619Jy sigma=0.001166 ! Fit after self-cal, rms=0.197607Jy sigma=0.001166 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244464 Jy ! Component: 100 - total flux cleaned = 0.000928191 Jy ! Component: 150 - total flux cleaned = 0.00140013 Jy ! Component: 200 - total flux cleaned = 0.00169694 Jy ! Total flux subtracted in 200 components = 0.00169694 Jy ! Clean residual min=-0.003178 max=0.003493 Jy/beam ! Clean residual mean=0.000049 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 3.1084 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 183 components and 3.1084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197529Jy sigma=0.001165 ! Fit after self-cal, rms=0.197516Jy sigma=0.001165 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197516Jy sigma=0.001165 ! Fit after self-cal, rms=0.197578Jy sigma=0.001165 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.863 mas, bmaj=9.328 mas, bpa=-41.7 degrees ! Estimated noise=694.937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202215 Jy ! Component: 100 - total flux cleaned = 0.0033577 Jy ! Component: 150 - total flux cleaned = 0.00437878 Jy ! Component: 200 - total flux cleaned = 0.00510264 Jy ! Total flux subtracted in 200 components = 0.00510264 Jy ! Clean residual min=-0.004433 max=0.004608 Jy/beam ! Clean residual mean=0.000135 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 3.1135 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 202 components and 3.1135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197534Jy sigma=0.001165 ! Fit after self-cal, rms=0.197525Jy sigma=0.001165 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576715 Jy ! Component: 100 - total flux cleaned = 0.00114468 Jy ! Component: 150 - total flux cleaned = 0.00163858 Jy ! Component: 200 - total flux cleaned = 0.0017899 Jy ! Total flux subtracted in 200 components = 0.0017899 Jy ! Clean residual min=-0.004436 max=0.004663 Jy/beam ! Clean residual mean=0.000111 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 3.11529 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 213 components and 3.11529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197514Jy sigma=0.001165 ! Fit after self-cal, rms=0.197512Jy sigma=0.001165 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=3.159 mas, bpa=-0.459 degrees ! Estimated noise=478.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.367 x 3.159 at -0.459 degrees (North through East) ! Clean map min=-0.0030303 max=2.2753 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197512Jy sigma=0.001165 ! Fit after self-cal, rms=0.195721Jy sigma=0.001085 ! Inverting map and beam ! Estimated beam: bmin=2.366 mas, bmaj=3.161 mas, bpa=-0.4303 degrees ! Estimated noise=478.364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551288 Jy ! Component: 100 - total flux cleaned = 0.000371488 Jy ! Component: 150 - total flux cleaned = 0.000292623 Jy ! Component: 200 - total flux cleaned = -7.57437e-06 Jy ! Total flux subtracted in 200 components = -7.57437e-06 Jy ! Clean residual min=-0.003017 max=0.003470 Jy/beam ! Clean residual mean=0.000059 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 3.11528 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 220 components and 3.11528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195625Jy sigma=0.001084 ! Fit after self-cal, rms=0.195617Jy sigma=0.001084 ! Inverting map ! Added new window around map position (-59.5, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148737 Jy ! Component: 100 - total flux cleaned = 0.0016619 Jy ! Component: 150 - total flux cleaned = 0.00166086 Jy ! Component: 200 - total flux cleaned = 0.00152642 Jy ! Total flux subtracted in 200 components = 0.00152642 Jy ! Clean residual min=-0.003004 max=0.003099 Jy/beam ! Clean residual mean=0.000054 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 3.11681 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 226 components and 3.11681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195524Jy sigma=0.001083 ! Fit after self-cal, rms=0.195519Jy sigma=0.001083 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195519Jy sigma=0.001083 ! Fit after self-cal, rms=0.195530Jy sigma=0.001083 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.989 mas, bmaj=2.776 mas, bpa=0.1021 degrees ! Estimated noise=967.613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73242 Jy ! Component: 100 - total flux cleaned = 2.23378 Jy ! Component: 150 - total flux cleaned = 2.48422 Jy ! Component: 200 - total flux cleaned = 2.62693 Jy ! Total flux subtracted in 200 components = 2.62693 Jy ! Clean residual min=-0.014619 max=0.075267 Jy/beam ! Clean residual mean=0.000452 rms=0.004760 Jy/beam ! Combined flux in latest and established models = 2.62693 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 2.62693 Jy ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=3.161 mas, bpa=-0.4492 degrees ! Estimated noise=478.527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159999 Jy ! Component: 100 - total flux cleaned = 0.251948 Jy ! Component: 150 - total flux cleaned = 0.310099 Jy ! Component: 200 - total flux cleaned = 0.348429 Jy ! Total flux subtracted in 200 components = 0.348429 Jy ! Clean residual min=-0.006686 max=0.020975 Jy/beam ! Clean residual mean=0.000657 rms=0.002672 Jy/beam ! Combined flux in latest and established models = 2.97536 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 79 components and 2.97536 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026669 Jy ! Component: 100 - total flux cleaned = 0.0464184 Jy ! Component: 150 - total flux cleaned = 0.0616191 Jy ! Component: 200 - total flux cleaned = 0.0736631 Jy ! Total flux subtracted in 200 components = 0.0736631 Jy ! Clean residual min=-0.003884 max=0.008261 Jy/beam ! Clean residual mean=0.000342 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 3.04902 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 113 components and 3.04902 Jy ! Inverting map ! Added new window around map position (2.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00997712 Jy ! Component: 100 - total flux cleaned = 0.0180627 Jy ! Component: 150 - total flux cleaned = 0.0248511 Jy ! Component: 200 - total flux cleaned = 0.0306426 Jy ! Total flux subtracted in 200 components = 0.0306426 Jy ! Clean residual min=-0.003249 max=0.005110 Jy/beam ! Clean residual mean=0.000213 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 3.07967 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 145 components and 3.07967 Jy ! Inverting map ! Added new window around map position (-8, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540399 Jy ! Component: 100 - total flux cleaned = 0.00988907 Jy ! Component: 150 - total flux cleaned = 0.0138566 Jy ! Component: 200 - total flux cleaned = 0.0163059 Jy ! Total flux subtracted in 200 components = 0.0163059 Jy ! Clean residual min=-0.003210 max=0.003696 Jy/beam ! Clean residual mean=0.000146 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 3.09597 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 174 components and 3.09597 Jy ! Inverting map ! Added new window around map position (22, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278091 Jy ! Component: 100 - total flux cleaned = 0.00469863 Jy ! Component: 150 - total flux cleaned = 0.00602629 Jy ! Component: 200 - total flux cleaned = 0.0071693 Jy ! Total flux subtracted in 200 components = 0.0071693 Jy ! Clean residual min=-0.003137 max=0.003442 Jy/beam ! Clean residual mean=0.000117 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 3.10314 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 191 components and 3.10314 Jy ! Inverting map ! Added new window around map position (25, -81.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245898 Jy ! Component: 100 - total flux cleaned = 0.00330823 Jy ! Component: 150 - total flux cleaned = 0.00431902 Jy ! Component: 200 - total flux cleaned = 0.00528076 Jy ! Total flux subtracted in 200 components = 0.00528076 Jy ! Clean residual min=-0.003093 max=0.003207 Jy/beam ! Clean residual mean=0.000097 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 3.10842 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 200 components and 3.10842 Jy ! Inverting map ! Added new window around map position (-104.5, -72.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245376 Jy ! Component: 100 - total flux cleaned = 0.00325591 Jy ! Component: 150 - total flux cleaned = 0.0041008 Jy ! Component: 200 - total flux cleaned = 0.00474906 Jy ! Total flux subtracted in 200 components = 0.00474906 Jy ! Clean residual min=-0.003066 max=0.002981 Jy/beam ! Clean residual mean=0.000082 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 3.11317 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 211 components and 3.11317 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.863 mas, bmaj=9.324 mas, bpa=-41.67 degrees ! Estimated noise=694.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372477 Jy ! Component: 100 - total flux cleaned = 0.00618463 Jy ! Component: 150 - total flux cleaned = 0.00809315 Jy ! Component: 200 - total flux cleaned = 0.00959763 Jy ! Total flux subtracted in 200 components = 0.00959763 Jy ! Clean residual min=-0.003387 max=0.004392 Jy/beam ! Clean residual mean=0.000147 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 3.12277 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106428 Jy ! Component: 100 - total flux cleaned = 0.00147469 Jy ! Component: 150 - total flux cleaned = 0.00169155 Jy ! Component: 200 - total flux cleaned = 0.00188814 Jy ! Total flux subtracted in 200 components = 0.00188814 Jy ! Clean residual min=-0.003426 max=0.004252 Jy/beam ! Clean residual mean=0.000121 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 3.12466 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 256 components and 3.12466 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=3.161 mas, bpa=-0.4492 degrees ! Estimated noise=478.527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000966287 Jy ! Component: 100 - total flux cleaned = -0.00104029 Jy ! Component: 150 - total flux cleaned = -0.0011099 Jy ! Component: 200 - total flux cleaned = -0.00124458 Jy ! Total flux subtracted in 200 components = -0.00124458 Jy ! Clean residual min=-0.003242 max=0.002838 Jy/beam ! Clean residual mean=0.000041 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 3.12341 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 269 components and 3.12341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195532Jy sigma=0.001083 ! Fit after self-cal, rms=0.195457Jy sigma=0.001082 wmodel J0136+4751_S_2009_05_13_pus_map.mod ! Writing 269 model components to file: J0136+4751_S_2009_05_13_pus_map.mod wobs J0136+4751_S_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0136+4751_S_2009_05_13_pus_uvs.fits wwins J0136+4751_S_2009_05_13_pus_map.win ! wwins: Wrote 14 windows to J0136+4751_S_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000623255 Jy ! Component: 100 - total flux cleaned = -0.000624035 Jy ! Component: 150 - total flux cleaned = -0.000319834 Jy ! Component: 200 - total flux cleaned = -0.000221307 Jy ! Component: 250 - total flux cleaned = 1.80335e-05 Jy ! Component: 300 - total flux cleaned = 0.000111388 Jy ! Component: 350 - total flux cleaned = 0.000248397 Jy ! Component: 400 - total flux cleaned = 0.000338379 Jy ! Component: 450 - total flux cleaned = 0.000426605 Jy ! Component: 500 - total flux cleaned = 0.000557342 Jy ! Component: 550 - total flux cleaned = 0.000858088 Jy ! Component: 600 - total flux cleaned = 0.000943104 Jy ! Component: 650 - total flux cleaned = 0.00115377 Jy ! Component: 700 - total flux cleaned = 0.0012789 Jy ! Component: 750 - total flux cleaned = 0.00144379 Jy ! Component: 800 - total flux cleaned = 0.00164762 Jy ! Component: 850 - total flux cleaned = 0.00168827 Jy ! Component: 900 - total flux cleaned = 0.00184853 Jy ! Component: 950 - total flux cleaned = 0.00184856 Jy ! Component: 1000 - total flux cleaned = 0.00192763 Jy ! Component: 1050 - total flux cleaned = 0.00208391 Jy ! Component: 1100 - total flux cleaned = 0.00208379 Jy ! Component: 1150 - total flux cleaned = 0.00212234 Jy ! Component: 1200 - total flux cleaned = 0.00223735 Jy ! Component: 1250 - total flux cleaned = 0.00227533 Jy ! Component: 1300 - total flux cleaned = 0.00238825 Jy ! Component: 1350 - total flux cleaned = 0.00238832 Jy ! Component: 1400 - total flux cleaned = 0.00246307 Jy ! Component: 1450 - total flux cleaned = 0.00257415 Jy ! Component: 1500 - total flux cleaned = 0.00257418 Jy ! Component: 1550 - total flux cleaned = 0.00275703 Jy ! Component: 1600 - total flux cleaned = 0.00286576 Jy ! Component: 1650 - total flux cleaned = 0.00290183 Jy ! Component: 1700 - total flux cleaned = 0.00311674 Jy ! Component: 1750 - total flux cleaned = 0.00308126 Jy ! Component: 1800 - total flux cleaned = 0.0031165 Jy ! Component: 1850 - total flux cleaned = 0.00325741 Jy ! Component: 1900 - total flux cleaned = 0.00329249 Jy ! Component: 1950 - total flux cleaned = 0.00346604 Jy ! Component: 2000 - total flux cleaned = 0.00356973 Jy ! Component: 2050 - total flux cleaned = 0.00350093 Jy ! Component: 2100 - total flux cleaned = 0.00360345 Jy ! Component: 2150 - total flux cleaned = 0.0037398 Jy ! Component: 2200 - total flux cleaned = 0.00370581 Jy ! Component: 2250 - total flux cleaned = 0.00387466 Jy ! Component: 2300 - total flux cleaned = 0.00387467 Jy ! Component: 2350 - total flux cleaned = 0.00407485 Jy ! Component: 2400 - total flux cleaned = 0.00417431 Jy ! Component: 2450 - total flux cleaned = 0.00410812 Jy ! Component: 2500 - total flux cleaned = 0.00430587 Jy ! Component: 2550 - total flux cleaned = 0.00430588 Jy ! Component: 2600 - total flux cleaned = 0.00443618 Jy ! Component: 2650 - total flux cleaned = 0.00446872 Jy ! Component: 2700 - total flux cleaned = 0.00456585 Jy ! Component: 2750 - total flux cleaned = 0.00466216 Jy ! Component: 2800 - total flux cleaned = 0.00472619 Jy ! Component: 2850 - total flux cleaned = 0.00482173 Jy ! Component: 2900 - total flux cleaned = 0.00485336 Jy ! Component: 2950 - total flux cleaned = 0.00488497 Jy ! Component: 3000 - total flux cleaned = 0.00504232 Jy ! Component: 3050 - total flux cleaned = 0.00510508 Jy ! Component: 3100 - total flux cleaned = 0.00519879 Jy ! Component: 3150 - total flux cleaned = 0.00529246 Jy ! Component: 3200 - total flux cleaned = 0.0053544 Jy ! Component: 3250 - total flux cleaned = 0.00541615 Jy ! Component: 3300 - total flux cleaned = 0.00553918 Jy ! Component: 3350 - total flux cleaned = 0.00553928 Jy ! Component: 3400 - total flux cleaned = 0.00563086 Jy ! Component: 3450 - total flux cleaned = 0.00575252 Jy ! Component: 3500 - total flux cleaned = 0.00590417 Jy ! Component: 3550 - total flux cleaned = 0.00590422 Jy ! Component: 3600 - total flux cleaned = 0.00602454 Jy ! Component: 3650 - total flux cleaned = 0.00611432 Jy ! Component: 3700 - total flux cleaned = 0.0061739 Jy ! Component: 3750 - total flux cleaned = 0.00635218 Jy ! Component: 3800 - total flux cleaned = 0.00623369 Jy ! Component: 3850 - total flux cleaned = 0.00626325 Jy ! Component: 3900 - total flux cleaned = 0.00635151 Jy ! Component: 3950 - total flux cleaned = 0.00652772 Jy ! Component: 4000 - total flux cleaned = 0.00655689 Jy ! Component: 4050 - total flux cleaned = 0.00664427 Jy ! Total flux subtracted in 4096 components = 0.00658623 Jy ! Clean residual min=-0.001450 max=0.001783 Jy/beam ! Clean residual mean=0.000021 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 3.13 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 607 components and 3.13 Jy ![Exited script file: muppet] wmap "J0136+4751_S_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.367 x 3.161 at -0.4492 degrees (North through East) ! Clean map min=-0.0023704 max=2.2791 Jy/beam ! Writing clean map to FITS file: J0136+4751_S_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.27913 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000498658 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0656379 0.0656379 0.131276 0.262552 0.525103 1.05021 2.10041 4.20083 8.40165 16.8033 33.6066 67.2132 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.279 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.367 x 3.161 at -0.4492 degrees (North through East) ! Clean map min=-0.0023704 max=2.2791 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0136+4751_S_2009_05_13_pus_uvs.log closed on Sun Jan 22 11:32:02 2017