! Started logfile: J0117-2111_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:37:24 2017 obs J0117-2111_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0117-2111_X_2009_05_13_pus_uva.fits ! AN table 1: 58 integrations on 120 of 120 possible baselines. ! AN table 2: 94 integrations on 120 of 120 possible baselines. ! AN table 3: 34 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.108647 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0117-2111 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 9700 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0117-2111_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 928 telescope corrections were flagged in sub-array 1. ! A total of 840 telescope corrections were flagged in sub-array 2. ! A total of 544 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 928 telescope corrections were flagged in sub-array 1. ! A total of 840 telescope corrections were flagged in sub-array 2. ! A total of 544 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 928 telescope corrections were flagged in sub-array 1. ! A total of 840 telescope corrections were flagged in sub-array 2. ! A total of 544 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 928 telescope corrections were flagged in sub-array 1. ! A total of 840 telescope corrections were flagged in sub-array 2. ! A total of 544 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.007715Jy sigma=0.008378 ! Fit after self-cal, rms=0.689889Jy sigma=0.005626 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9462 mas, bmaj=2.865 mas, bpa=0.8705 degrees ! Estimated noise=1165.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.255301 Jy ! Component: 100 - total flux cleaned = 0.335797 Jy ! Total flux subtracted in 100 components = 0.335797 Jy ! Clean residual min=-0.011917 max=0.032406 Jy/beam ! Clean residual mean=0.000041 rms=0.004700 Jy/beam ! Combined flux in latest and established models = 0.335797 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.335797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229941Jy sigma=0.001217 ! Fit after self-cal, rms=0.229850Jy sigma=0.001215 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345525 Jy ! Component: 100 - total flux cleaned = 0.0524686 Jy ! Total flux subtracted in 100 components = 0.0524686 Jy ! Clean residual min=-0.007113 max=0.011462 Jy/beam ! Clean residual mean=0.000022 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.388266 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 0.388266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222881Jy sigma=0.001116 ! Fit after self-cal, rms=0.222890Jy sigma=0.001115 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.159 mas, bmaj=3.335 mas, bpa=-1.785 degrees ! Estimated noise=874.849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139052 Jy ! Component: 100 - total flux cleaned = 0.0203437 Jy ! Component: 150 - total flux cleaned = 0.0236404 Jy ! Component: 200 - total flux cleaned = 0.0253886 Jy ! Total flux subtracted in 200 components = 0.0253886 Jy ! Clean residual min=-0.004735 max=0.005057 Jy/beam ! Clean residual mean=0.000018 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.413654 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 82 components and 0.413654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221843Jy sigma=0.001104 ! Fit after self-cal, rms=0.221873Jy sigma=0.001103 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 HN 1.01 HO 1.00* ! KK 1.00* KP 1.01 LA 1.01 MK 1.00* ! NL 0.98 NY 1.00* OV 0.97 PT 1.01 ! SC 0.99 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.96 HN 1.05 HO 1.00* ! KK 1.00* KP 0.95 LA 1.00 MK 1.00* ! NL 0.95 NY 1.00* OV 0.96 PT 1.04 ! SC 1.00 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.98 HN 1.02 HO 1.00* ! KK 1.00* KP 0.99 LA 1.01 MK 1.00* ! NL 1.00 NY 1.00* OV 1.01 PT 1.05 ! SC 1.00 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 1.05 HO 1.00* ! KK 1.00* KP 1.01 LA 1.01 MK 1.00* ! NL 0.99 NY 1.00* OV 0.98 PT 1.06 ! SC 0.96 TS 1.00* WZ 1.00* KB 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* HN 0.00* HO 0.00* ! KK 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WZ 0.00* KB 0.00* ! ! ! Fit before self-cal, rms=0.221873Jy sigma=0.001103 ! Fit after self-cal, rms=0.227847Jy sigma=0.001098 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.162 mas, bmaj=3.35 mas, bpa=-1.711 degrees ! Estimated noise=875.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108438 Jy ! Component: 100 - total flux cleaned = -0.000145637 Jy ! Component: 150 - total flux cleaned = -0.00014442 Jy ! Component: 200 - total flux cleaned = -0.000143984 Jy ! Total flux subtracted in 200 components = -0.000143984 Jy ! Clean residual min=-0.003362 max=0.003798 Jy/beam ! Clean residual mean=0.000025 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.41351 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 100 components and 0.41351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227834Jy sigma=0.001098 ! Fit after self-cal, rms=0.227837Jy sigma=0.001098 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227837Jy sigma=0.001098 ! Fit after self-cal, rms=0.228193Jy sigma=0.001098 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.162 mas, bmaj=3.35 mas, bpa=-1.679 degrees ! Estimated noise=876.159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.37428e-05 Jy ! Component: 100 - total flux cleaned = 1.77461e-05 Jy ! Component: 150 - total flux cleaned = 1.70513e-05 Jy ! Component: 200 - total flux cleaned = 1.64246e-05 Jy ! Total flux subtracted in 200 components = 1.64246e-05 Jy ! Clean residual min=-0.003320 max=0.003785 Jy/beam ! Clean residual mean=0.000024 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.413527 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.413527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228184Jy sigma=0.001098 ! Fit after self-cal, rms=0.228188Jy sigma=0.001098 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.42648e-05 Jy ! Component: 100 - total flux cleaned = 3.97221e-05 Jy ! Component: 150 - total flux cleaned = 3.94722e-05 Jy ! Component: 200 - total flux cleaned = 5.29737e-05 Jy ! Total flux subtracted in 200 components = 5.29737e-05 Jy ! Clean residual min=-0.003327 max=0.003767 Jy/beam ! Clean residual mean=0.000024 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.41358 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.41358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228186Jy sigma=0.001098 ! Fit after self-cal, rms=0.228186Jy sigma=0.001098 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228186Jy sigma=0.001098 ! Fit after self-cal, rms=0.226970Jy sigma=0.001096 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.161 mas, bmaj=3.346 mas, bpa=-1.585 degrees ! Estimated noise=877.303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197868 Jy ! Component: 100 - total flux cleaned = 0.000151989 Jy ! Component: 150 - total flux cleaned = 0.000111706 Jy ! Component: 200 - total flux cleaned = 7.38603e-05 Jy ! Total flux subtracted in 200 components = 7.38603e-05 Jy ! Clean residual min=-0.003132 max=0.003517 Jy/beam ! Clean residual mean=0.000006 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.413654 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 127 components and 0.413654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226961Jy sigma=0.001096 ! Fit after self-cal, rms=0.226978Jy sigma=0.001096 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.29332e-05 Jy ! Component: 100 - total flux cleaned = -3.65834e-05 Jy ! Component: 150 - total flux cleaned = -2.56966e-05 Jy ! Component: 200 - total flux cleaned = -2.55876e-05 Jy ! Total flux subtracted in 200 components = -2.55876e-05 Jy ! Clean residual min=-0.003103 max=0.003521 Jy/beam ! Clean residual mean=0.000006 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.413628 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 132 components and 0.413628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226976Jy sigma=0.001096 ! Fit after self-cal, rms=0.226976Jy sigma=0.001096 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226976Jy sigma=0.001096 ! Fit after self-cal, rms=0.227190Jy sigma=0.001096 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=4.955 mas, bpa=-13.8 degrees ! Estimated noise=1020.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441584 Jy ! Component: 100 - total flux cleaned = 0.000468543 Jy ! Component: 150 - total flux cleaned = 0.000467233 Jy ! Component: 200 - total flux cleaned = 0.000466069 Jy ! Total flux subtracted in 200 components = 0.000466069 Jy ! Clean residual min=-0.003253 max=0.003456 Jy/beam ! Clean residual mean=0.000011 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.414094 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 137 components and 0.414094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227187Jy sigma=0.001096 ! Fit after self-cal, rms=0.227188Jy sigma=0.001096 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.44477e-05 Jy ! Component: 100 - total flux cleaned = 1.33168e-05 Jy ! Component: 150 - total flux cleaned = 1.24277e-05 Jy ! Component: 200 - total flux cleaned = 1.26965e-05 Jy ! Total flux subtracted in 200 components = 1.26965e-05 Jy ! Clean residual min=-0.003222 max=0.003422 Jy/beam ! Clean residual mean=0.000010 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.414107 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 138 components and 0.414107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227188Jy sigma=0.001096 ! Fit after self-cal, rms=0.227188Jy sigma=0.001096 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.16 mas, bmaj=3.346 mas, bpa=-1.557 degrees ! Estimated noise=877.968 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.16 x 3.346 at -1.557 degrees (North through East) ! Clean map min=-0.0029323 max=0.34016 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9446 mas, bmaj=2.868 mas, bpa=1.278 degrees ! Estimated noise=1170.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.256452 Jy ! Component: 100 - total flux cleaned = 0.339284 Jy ! Component: 150 - total flux cleaned = 0.372782 Jy ! Component: 200 - total flux cleaned = 0.389502 Jy ! Total flux subtracted in 200 components = 0.389502 Jy ! Clean residual min=-0.005573 max=0.008624 Jy/beam ! Clean residual mean=0.000014 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.389502 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.389502 Jy ! Inverting map and beam ! Estimated beam: bmin=1.16 mas, bmaj=3.346 mas, bpa=-1.557 degrees ! Estimated noise=877.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127371 Jy ! Component: 100 - total flux cleaned = 0.0185843 Jy ! Component: 150 - total flux cleaned = 0.0215031 Jy ! Component: 200 - total flux cleaned = 0.0230536 Jy ! Total flux subtracted in 200 components = 0.0230536 Jy ! Clean residual min=-0.003190 max=0.003500 Jy/beam ! Clean residual mean=0.000007 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.412555 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 76 components and 0.412555 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=4.955 mas, bpa=-13.8 degrees ! Estimated noise=1020.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126807 Jy ! Component: 100 - total flux cleaned = 0.00133822 Jy ! Component: 150 - total flux cleaned = 0.00139194 Jy ! Component: 200 - total flux cleaned = 0.00140608 Jy ! Total flux subtracted in 200 components = 0.00140608 Jy ! Clean residual min=-0.003366 max=0.003562 Jy/beam ! Clean residual mean=0.000011 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.413961 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.42335e-05 Jy ! Component: 100 - total flux cleaned = -1.31492e-05 Jy ! Component: 150 - total flux cleaned = -1.36006e-05 Jy ! Component: 200 - total flux cleaned = -1.39849e-05 Jy ! Total flux subtracted in 200 components = -1.39849e-05 Jy ! Clean residual min=-0.003332 max=0.003525 Jy/beam ! Clean residual mean=0.000010 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.413947 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.413947 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.16 mas, bmaj=3.346 mas, bpa=-1.557 degrees ! Estimated noise=877.968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.58687e-06 Jy ! Component: 100 - total flux cleaned = 1.77741e-05 Jy ! Component: 150 - total flux cleaned = -3.18307e-06 Jy ! Component: 200 - total flux cleaned = -2.31222e-05 Jy ! Total flux subtracted in 200 components = -2.31222e-05 Jy ! Clean residual min=-0.003171 max=0.003459 Jy/beam ! Clean residual mean=0.000005 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.413924 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 104 components and 0.413924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227179Jy sigma=0.001096 ! Fit after self-cal, rms=0.227172Jy sigma=0.001096 wmodel J0117-2111_X_2009_05_13_pus_map.mod ! Writing 104 model components to file: J0117-2111_X_2009_05_13_pus_map.mod wobs J0117-2111_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0117-2111_X_2009_05_13_pus_uvs.fits wwins J0117-2111_X_2009_05_13_pus_map.win ! wwins: Wrote 1 windows to J0117-2111_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000830522 Jy ! Component: 100 - total flux cleaned = 0.00105361 Jy ! Component: 150 - total flux cleaned = 0.00136594 Jy ! Component: 200 - total flux cleaned = 0.0016643 Jy ! Component: 250 - total flux cleaned = 0.00176124 Jy ! Component: 300 - total flux cleaned = 0.00185279 Jy ! Component: 350 - total flux cleaned = 0.00194059 Jy ! Component: 400 - total flux cleaned = 0.00189947 Jy ! Component: 450 - total flux cleaned = 0.00202333 Jy ! Component: 500 - total flux cleaned = 0.0020234 Jy ! Component: 550 - total flux cleaned = 0.00202402 Jy ! Component: 600 - total flux cleaned = 0.00210088 Jy ! Component: 650 - total flux cleaned = 0.00213843 Jy ! Component: 700 - total flux cleaned = 0.0021029 Jy ! Component: 750 - total flux cleaned = 0.00217384 Jy ! Component: 800 - total flux cleaned = 0.00210471 Jy ! Component: 850 - total flux cleaned = 0.00207106 Jy ! Component: 900 - total flux cleaned = 0.00207158 Jy ! Component: 950 - total flux cleaned = 0.00200699 Jy ! Component: 1000 - total flux cleaned = 0.00197562 Jy ! Component: 1050 - total flux cleaned = 0.00194417 Jy ! Component: 1100 - total flux cleaned = 0.00188367 Jy ! Component: 1150 - total flux cleaned = 0.00194279 Jy ! Component: 1200 - total flux cleaned = 0.00197106 Jy ! Component: 1250 - total flux cleaned = 0.0019419 Jy ! Component: 1300 - total flux cleaned = 0.00191351 Jy ! Component: 1350 - total flux cleaned = 0.00188539 Jy ! Component: 1400 - total flux cleaned = 0.001804 Jy ! Component: 1450 - total flux cleaned = 0.00185705 Jy ! Component: 1500 - total flux cleaned = 0.0017262 Jy ! Component: 1550 - total flux cleaned = 0.00167475 Jy ! Component: 1600 - total flux cleaned = 0.00159875 Jy ! Component: 1650 - total flux cleaned = 0.00154905 Jy ! Component: 1700 - total flux cleaned = 0.00157321 Jy ! Component: 1750 - total flux cleaned = 0.00152484 Jy ! Component: 1800 - total flux cleaned = 0.00150103 Jy ! Component: 1850 - total flux cleaned = 0.00145393 Jy ! Component: 1900 - total flux cleaned = 0.00147742 Jy ! Component: 1950 - total flux cleaned = 0.00156878 Jy ! Component: 2000 - total flux cleaned = 0.00159144 Jy ! Component: 2050 - total flux cleaned = 0.00161369 Jy ! Component: 2100 - total flux cleaned = 0.00170127 Jy ! Component: 2150 - total flux cleaned = 0.00176557 Jy ! Component: 2200 - total flux cleaned = 0.00172257 Jy ! Component: 2250 - total flux cleaned = 0.00172259 Jy ! Component: 2300 - total flux cleaned = 0.00174331 Jy ! Component: 2350 - total flux cleaned = 0.00170232 Jy ! Component: 2400 - total flux cleaned = 0.0017229 Jy ! Component: 2450 - total flux cleaned = 0.00168301 Jy ! Component: 2500 - total flux cleaned = 0.00174275 Jy ! Component: 2550 - total flux cleaned = 0.00172328 Jy ! Component: 2600 - total flux cleaned = 0.00172328 Jy ! Component: 2650 - total flux cleaned = 0.00176132 Jy ! Component: 2700 - total flux cleaned = 0.00172323 Jy ! Component: 2750 - total flux cleaned = 0.0017233 Jy ! Component: 2800 - total flux cleaned = 0.00168598 Jy ! Component: 2850 - total flux cleaned = 0.00168587 Jy ! Component: 2900 - total flux cleaned = 0.00164953 Jy ! Component: 2950 - total flux cleaned = 0.00164966 Jy ! Component: 3000 - total flux cleaned = 0.00164975 Jy ! Component: 3050 - total flux cleaned = 0.00164972 Jy ! Component: 3100 - total flux cleaned = 0.00163219 Jy ! Component: 3150 - total flux cleaned = 0.00168425 Jy ! Component: 3200 - total flux cleaned = 0.00165015 Jy ! Component: 3250 - total flux cleaned = 0.00166707 Jy ! Component: 3300 - total flux cleaned = 0.00173406 Jy ! Component: 3350 - total flux cleaned = 0.00170074 Jy ! Component: 3400 - total flux cleaned = 0.00175047 Jy ! Component: 3450 - total flux cleaned = 0.00175064 Jy ! Component: 3500 - total flux cleaned = 0.00179946 Jy ! Component: 3550 - total flux cleaned = 0.00181546 Jy ! Component: 3600 - total flux cleaned = 0.00186322 Jy ! Component: 3650 - total flux cleaned = 0.00183165 Jy ! Component: 3700 - total flux cleaned = 0.00186323 Jy ! Component: 3750 - total flux cleaned = 0.0019256 Jy ! Component: 3800 - total flux cleaned = 0.00192553 Jy ! Component: 3850 - total flux cleaned = 0.00198697 Jy ! Component: 3900 - total flux cleaned = 0.00198696 Jy ! Component: 3950 - total flux cleaned = 0.00204725 Jy ! Component: 4000 - total flux cleaned = 0.00204734 Jy ! Component: 4050 - total flux cleaned = 0.00210704 Jy ! Total flux subtracted in 4096 components = 0.00215148 Jy ! Clean residual min=-0.000927 max=0.000877 Jy/beam ! Clean residual mean=0.000005 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.416076 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 408 components and 0.416076 Jy ![Exited script file: muppet] wmap "J0117-2111_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.16 x 3.346 at -1.557 degrees (North through East) ! Clean map min=-0.0019841 max=0.34139 Jy/beam ! Writing clean map to FITS file: J0117-2111_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.34139 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000301983 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.26537 0.26537 0.530741 1.06148 2.12296 4.24593 8.49185 16.9837 33.9674 67.9348 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.341 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.16 x 3.346 at -1.557 degrees (North through East) ! Clean map min=-0.0019841 max=0.34139 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0117-2111_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:37:30 2017