! Started logfile: J0009-3216_X_2009_05_13_pus_uvs.log on Sat Jan 21 12:36:43 2017 obs J0009-3216_X_2009_05_13_pus_uva.fits ! Reading UV FITS file: J0009-3216_X_2009_05_13_pus_uva.fits ! AN table 1: 189 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.406834 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0009-3216 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1988 lines of history. ! ! Reading 36908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.1 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0009-3216_X_2009_05_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1065 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1065 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1065 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1065 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980326Jy sigma=0.007416 ! Fit after self-cal, rms=0.907489Jy sigma=0.006957 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5016 mas, bmaj=0.8312 mas, bpa=-41.96 degrees ! Estimated noise=1264.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797159 Jy ! Component: 100 - total flux cleaned = 0.105807 Jy ! Total flux subtracted in 100 components = 0.105807 Jy ! Clean residual min=-0.007924 max=0.014571 Jy/beam ! Clean residual mean=-0.000061 rms=0.002032 Jy/beam ! Combined flux in latest and established models = 0.105807 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.105807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189194Jy sigma=0.001140 ! Fit after self-cal, rms=0.188879Jy sigma=0.001138 ! Inverting map ! Added new window around map position (-0.3, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166967 Jy ! Component: 100 - total flux cleaned = 0.0270908 Jy ! Total flux subtracted in 100 components = 0.0270908 Jy ! Clean residual min=-0.006948 max=0.007374 Jy/beam ! Clean residual mean=-0.000026 rms=0.001752 Jy/beam ! Combined flux in latest and established models = 0.132897 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.132897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187067Jy sigma=0.001116 ! Fit after self-cal, rms=0.186984Jy sigma=0.001115 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7388 mas, bmaj=1.177 mas, bpa=-27.17 degrees ! Estimated noise=493.673 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00922253 Jy ! Component: 100 - total flux cleaned = 0.0133366 Jy ! Component: 150 - total flux cleaned = 0.0154746 Jy ! Component: 200 - total flux cleaned = 0.0162386 Jy ! Total flux subtracted in 200 components = 0.0162386 Jy ! Clean residual min=-0.003165 max=0.004879 Jy/beam ! Clean residual mean=-0.000015 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.149136 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.149136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186610Jy sigma=0.001111 ! Fit after self-cal, rms=0.186504Jy sigma=0.001110 ! Inverting map ! Added new window around map position (1.4, -3.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363579 Jy ! Component: 100 - total flux cleaned = 0.00417131 Jy ! Component: 150 - total flux cleaned = 0.00443231 Jy ! Component: 200 - total flux cleaned = 0.00466663 Jy ! Total flux subtracted in 200 components = 0.00466663 Jy ! Clean residual min=-0.003216 max=0.003465 Jy/beam ! Clean residual mean=-0.000004 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.153803 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.153803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186395Jy sigma=0.001110 ! Fit after self-cal, rms=0.186286Jy sigma=0.001109 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.16 HO 0.94 ! KK 1.00* KP 1.02 LA 1.01 MK 1.14 ! NL 1.02 NY 1.00* OV 0.94 PT 0.99 ! SC 1.00 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.20 HO 0.99 ! KK 1.00* KP 0.93 LA 1.01 MK 0.93 ! NL 0.99 NY 1.00* OV 0.96 PT 1.04 ! SC 0.90 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.00 HO 0.89 ! KK 1.00* KP 0.96 LA 1.01 MK 1.01 ! NL 1.05 NY 1.00* OV 0.97 PT 1.03 ! SC 1.06 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.96 HO 0.85 ! KK 1.00* KP 1.00 LA 0.98 MK 0.92 ! NL 0.99 NY 1.00* OV 1.00 PT 1.06 ! SC 0.95 TS 1.00* WZ 1.00* KB 1.00* ! ! ! Fit before self-cal, rms=0.186286Jy sigma=0.001109 ! Fit after self-cal, rms=0.182388Jy sigma=0.001108 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7312 mas, bmaj=1.149 mas, bpa=-28.74 degrees ! Estimated noise=490.682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118524 Jy ! Component: 100 - total flux cleaned = 0.0013161 Jy ! Component: 150 - total flux cleaned = 0.00141875 Jy ! Component: 200 - total flux cleaned = 0.00151132 Jy ! Total flux subtracted in 200 components = 0.00151132 Jy ! Clean residual min=-0.003040 max=0.002832 Jy/beam ! Clean residual mean=-0.000013 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.155314 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.155314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182341Jy sigma=0.001107 ! Fit after self-cal, rms=0.182285Jy sigma=0.001107 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182285Jy sigma=0.001107 ! Fit after self-cal, rms=0.180347Jy sigma=0.001107 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7279 mas, bmaj=1.14 mas, bpa=-29.16 degrees ! Estimated noise=487.913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000574186 Jy ! Component: 100 - total flux cleaned = 0.000626769 Jy ! Component: 150 - total flux cleaned = 0.000670654 Jy ! Component: 200 - total flux cleaned = 0.000710358 Jy ! Total flux subtracted in 200 components = 0.000710358 Jy ! Clean residual min=-0.002838 max=0.002830 Jy/beam ! Clean residual mean=-0.000014 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.156024 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.156024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180312Jy sigma=0.001107 ! Fit after self-cal, rms=0.180248Jy sigma=0.001107 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 5.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184444 Jy ! Component: 100 - total flux cleaned = 0.00233028 Jy ! Component: 150 - total flux cleaned = 0.0027447 Jy ! Component: 200 - total flux cleaned = 0.00282496 Jy ! Total flux subtracted in 200 components = 0.00282496 Jy ! Clean residual min=-0.002839 max=0.002918 Jy/beam ! Clean residual mean=-0.000008 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.158849 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 72 components and 0.158849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180198Jy sigma=0.001106 ! Fit after self-cal, rms=0.180122Jy sigma=0.001106 ! Inverting map ! Added new window around map position (-10.6, 1.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244208 Jy ! Component: 100 - total flux cleaned = 0.00353855 Jy ! Component: 150 - total flux cleaned = 0.00405544 Jy ! Component: 200 - total flux cleaned = 0.00417805 Jy ! Total flux subtracted in 200 components = 0.00417805 Jy ! Clean residual min=-0.002797 max=0.002700 Jy/beam ! Clean residual mean=-0.000005 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.163027 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.163027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180069Jy sigma=0.001106 ! Fit after self-cal, rms=0.180017Jy sigma=0.001106 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180017Jy sigma=0.001106 ! Fit after self-cal, rms=0.178645Jy sigma=0.001105 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7264 mas, bmaj=1.13 mas, bpa=-29.32 degrees ! Estimated noise=485.332 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134905 Jy ! Component: 100 - total flux cleaned = 0.0015423 Jy ! Component: 150 - total flux cleaned = 0.00146244 Jy ! Component: 200 - total flux cleaned = 0.00146507 Jy ! Total flux subtracted in 200 components = 0.00146507 Jy ! Clean residual min=-0.002032 max=0.002178 Jy/beam ! Clean residual mean=-0.000007 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.164492 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.164492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178618Jy sigma=0.001104 ! Fit after self-cal, rms=0.178618Jy sigma=0.001104 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629972 Jy ! Component: 100 - total flux cleaned = 0.00085098 Jy ! Component: 150 - total flux cleaned = 0.00103485 Jy ! Component: 200 - total flux cleaned = 0.00111695 Jy ! Total flux subtracted in 200 components = 0.00111695 Jy ! Clean residual min=-0.001833 max=0.001939 Jy/beam ! Clean residual mean=-0.000005 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.165609 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 0.165609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178568Jy sigma=0.001104 ! Fit after self-cal, rms=0.178516Jy sigma=0.001104 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178516Jy sigma=0.001104 ! Fit after self-cal, rms=0.178172Jy sigma=0.001104 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.26 mas, bmaj=6.383 mas, bpa=-1.166 degrees ! Estimated noise=618.644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110097 Jy ! Component: 100 - total flux cleaned = -0.000132148 Jy ! Component: 150 - total flux cleaned = -0.000152465 Jy ! Component: 200 - total flux cleaned = -0.000170729 Jy ! Total flux subtracted in 200 components = -0.000170729 Jy ! Clean residual min=-0.001695 max=0.001459 Jy/beam ! Clean residual mean=-0.000018 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.165439 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 131 components and 0.165439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178171Jy sigma=0.001104 ! Fit after self-cal, rms=0.178172Jy sigma=0.001104 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.21265e-05 Jy ! Component: 100 - total flux cleaned = -6.65426e-05 Jy ! Component: 150 - total flux cleaned = -8.13841e-05 Jy ! Component: 200 - total flux cleaned = -0.00012135 Jy ! Total flux subtracted in 200 components = -0.00012135 Jy ! Clean residual min=-0.001700 max=0.001445 Jy/beam ! Clean residual mean=-0.000018 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.165317 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 141 components and 0.165317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178172Jy sigma=0.001104 ! Fit after self-cal, rms=0.178171Jy sigma=0.001104 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7249 mas, bmaj=1.124 mas, bpa=-29.22 degrees ! Estimated noise=484.405 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7249 x 1.124 at -29.22 degrees (North through East) ! Clean map min=-0.004201 max=0.10249 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.487 mas, bmaj=0.8058 mas, bpa=-44.71 degrees ! Estimated noise=1245.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0763243 Jy ! Component: 100 - total flux cleaned = 0.105042 Jy ! Component: 150 - total flux cleaned = 0.121457 Jy ! Component: 200 - total flux cleaned = 0.132575 Jy ! Total flux subtracted in 200 components = 0.132575 Jy ! Clean residual min=-0.007104 max=0.007086 Jy/beam ! Clean residual mean=-0.000034 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.132575 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.132575 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7249 mas, bmaj=1.124 mas, bpa=-29.22 degrees ! Estimated noise=484.405 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103177 Jy ! Component: 100 - total flux cleaned = 0.0161818 Jy ! Component: 150 - total flux cleaned = 0.0204705 Jy ! Component: 200 - total flux cleaned = 0.023959 Jy ! Total flux subtracted in 200 components = 0.023959 Jy ! Clean residual min=-0.002506 max=0.003207 Jy/beam ! Clean residual mean=-0.000026 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.156534 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 41 components and 0.156534 Jy ! Inverting map ! Added new window around map position (1.5, 1.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025569 Jy ! Component: 100 - total flux cleaned = 0.00387905 Jy ! Component: 150 - total flux cleaned = 0.00502588 Jy ! Component: 200 - total flux cleaned = 0.00572409 Jy ! Total flux subtracted in 200 components = 0.00572409 Jy ! Clean residual min=-0.002213 max=0.002156 Jy/beam ! Clean residual mean=-0.000014 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.162258 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.162258 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.26 mas, bmaj=6.383 mas, bpa=-1.166 degrees ! Estimated noise=618.644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118714 Jy ! Component: 100 - total flux cleaned = 0.00185863 Jy ! Component: 150 - total flux cleaned = 0.00233929 Jy ! Component: 200 - total flux cleaned = 0.0024051 Jy ! Total flux subtracted in 200 components = 0.0024051 Jy ! Clean residual min=-0.002149 max=0.001687 Jy/beam ! Clean residual mean=-0.000021 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.164663 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12837e-05 Jy ! Component: 100 - total flux cleaned = 0.000119837 Jy ! Component: 150 - total flux cleaned = 0.000173995 Jy ! Component: 200 - total flux cleaned = 0.000227271 Jy ! Total flux subtracted in 200 components = 0.000227271 Jy ! Clean residual min=-0.002075 max=0.001614 Jy/beam ! Clean residual mean=-0.000020 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.16489 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 105 components and 0.16489 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7249 mas, bmaj=1.124 mas, bpa=-29.22 degrees ! Estimated noise=484.405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313062 Jy ! Component: 100 - total flux cleaned = 0.000429749 Jy ! Component: 150 - total flux cleaned = 0.000318525 Jy ! Component: 200 - total flux cleaned = 0.000316922 Jy ! Total flux subtracted in 200 components = 0.000316922 Jy ! Clean residual min=-0.001924 max=0.001947 Jy/beam ! Clean residual mean=-0.000009 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.165207 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 126 components and 0.165207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178220Jy sigma=0.001104 ! Fit after self-cal, rms=0.178180Jy sigma=0.001104 wmodel J0009-3216_X_2009_05_13_pus_map.mod ! Writing 126 model components to file: J0009-3216_X_2009_05_13_pus_map.mod wobs J0009-3216_X_2009_05_13_pus_uvs.fits ! Writing UV FITS file: J0009-3216_X_2009_05_13_pus_uvs.fits wwins J0009-3216_X_2009_05_13_pus_map.win ! wwins: Wrote 7 windows to J0009-3216_X_2009_05_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.5726e-05 Jy ! Component: 100 - total flux cleaned = 0.000201797 Jy ! Component: 150 - total flux cleaned = 0.000265202 Jy ! Component: 200 - total flux cleaned = 0.00035822 Jy ! Component: 250 - total flux cleaned = 0.000479809 Jy ! Component: 300 - total flux cleaned = 0.000567918 Jy ! Component: 350 - total flux cleaned = 0.000682893 Jy ! Component: 400 - total flux cleaned = 0.000880807 Jy ! Component: 450 - total flux cleaned = 0.00104655 Jy ! Component: 500 - total flux cleaned = 0.00112856 Jy ! Component: 550 - total flux cleaned = 0.00131698 Jy ! Component: 600 - total flux cleaned = 0.00147562 Jy ! Component: 650 - total flux cleaned = 0.00152828 Jy ! Component: 700 - total flux cleaned = 0.00165698 Jy ! Component: 750 - total flux cleaned = 0.001708 Jy ! Component: 800 - total flux cleaned = 0.00175841 Jy ! Component: 850 - total flux cleaned = 0.00183269 Jy ! Component: 900 - total flux cleaned = 0.00195506 Jy ! Component: 950 - total flux cleaned = 0.00193104 Jy ! Component: 1000 - total flux cleaned = 0.00212249 Jy ! Component: 1050 - total flux cleaned = 0.00209893 Jy ! Component: 1100 - total flux cleaned = 0.00219267 Jy ! Component: 1150 - total flux cleaned = 0.00223866 Jy ! Component: 1200 - total flux cleaned = 0.00230775 Jy ! Component: 1250 - total flux cleaned = 0.00237569 Jy ! Component: 1300 - total flux cleaned = 0.00251066 Jy ! Component: 1350 - total flux cleaned = 0.00244347 Jy ! Component: 1400 - total flux cleaned = 0.00257628 Jy ! Component: 1450 - total flux cleaned = 0.00266389 Jy ! Component: 1500 - total flux cleaned = 0.00268563 Jy ! Component: 1550 - total flux cleaned = 0.00277116 Jy ! Component: 1600 - total flux cleaned = 0.00277121 Jy ! Component: 1650 - total flux cleaned = 0.00283487 Jy ! Component: 1700 - total flux cleaned = 0.00293953 Jy ! Component: 1750 - total flux cleaned = 0.00300168 Jy ! Component: 1800 - total flux cleaned = 0.00312528 Jy ! Component: 1850 - total flux cleaned = 0.00318644 Jy ! Component: 1900 - total flux cleaned = 0.0032065 Jy ! Component: 1950 - total flux cleaned = 0.00334738 Jy ! Component: 2000 - total flux cleaned = 0.00338722 Jy ! Component: 2050 - total flux cleaned = 0.003526 Jy ! Component: 2100 - total flux cleaned = 0.003526 Jy ! Component: 2150 - total flux cleaned = 0.00354581 Jy ! Component: 2200 - total flux cleaned = 0.00370123 Jy ! Component: 2250 - total flux cleaned = 0.0037204 Jy ! Component: 2300 - total flux cleaned = 0.00385424 Jy ! Component: 2350 - total flux cleaned = 0.00387297 Jy ! Component: 2400 - total flux cleaned = 0.00391068 Jy ! Component: 2450 - total flux cleaned = 0.00406065 Jy ! Component: 2500 - total flux cleaned = 0.00409782 Jy ! Component: 2550 - total flux cleaned = 0.00411633 Jy ! Component: 2600 - total flux cleaned = 0.00426384 Jy ! Component: 2650 - total flux cleaned = 0.00430046 Jy ! Component: 2700 - total flux cleaned = 0.00437359 Jy ! Component: 2750 - total flux cleaned = 0.0044461 Jy ! Component: 2800 - total flux cleaned = 0.00450033 Jy ! Component: 2850 - total flux cleaned = 0.00451836 Jy ! Component: 2900 - total flux cleaned = 0.00462522 Jy ! Component: 2950 - total flux cleaned = 0.00458971 Jy ! Component: 3000 - total flux cleaned = 0.00467786 Jy ! Component: 3050 - total flux cleaned = 0.00464258 Jy ! Component: 3100 - total flux cleaned = 0.00472968 Jy ! Component: 3150 - total flux cleaned = 0.00471246 Jy ! Component: 3200 - total flux cleaned = 0.0047816 Jy ! Component: 3250 - total flux cleaned = 0.00485014 Jy ! Component: 3300 - total flux cleaned = 0.00496963 Jy ! Component: 3350 - total flux cleaned = 0.00500337 Jy ! Component: 3400 - total flux cleaned = 0.00498635 Jy ! Component: 3450 - total flux cleaned = 0.00505346 Jy ! Component: 3500 - total flux cleaned = 0.00510349 Jy ! Component: 3550 - total flux cleaned = 0.00510334 Jy ! Component: 3600 - total flux cleaned = 0.00513642 Jy ! Component: 3650 - total flux cleaned = 0.00516934 Jy ! Component: 3700 - total flux cleaned = 0.00516939 Jy ! Component: 3750 - total flux cleaned = 0.00515303 Jy ! Component: 3800 - total flux cleaned = 0.00521824 Jy ! Component: 3850 - total flux cleaned = 0.0051859 Jy ! Component: 3900 - total flux cleaned = 0.00520189 Jy ! Component: 3950 - total flux cleaned = 0.00523386 Jy ! Component: 4000 - total flux cleaned = 0.00517004 Jy ! Component: 4050 - total flux cleaned = 0.00518578 Jy ! Total flux subtracted in 4096 components = 0.00523333 Jy ! Clean residual min=-0.000904 max=0.000918 Jy/beam ! Clean residual mean=-0.000005 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.170441 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 388 components and 0.170441 Jy ![Exited script file: muppet] wmap "J0009-3216_X_2009_05_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7249 x 1.124 at -29.22 degrees (North through East) ! Clean map min=-0.0019458 max=0.10106 Jy/beam ! Writing clean map to FITS file: J0009-3216_X_2009_05_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101064 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000279869 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.83077 0.83077 1.66154 3.32308 6.64616 13.2923 26.5846 53.1693 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7249 x 1.124 at -29.22 degrees (North through East) ! Clean map min=-0.0019458 max=0.10106 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0009-3216_X_2009_05_13_pus_uvs.log closed on Sat Jan 21 12:36:49 2017