! Started logfile: J1744+5542_X_2009_04_21_pus_uvs.log on Sun Jan 23 16:46:28 2011
obs J1744+5542_X_2009_04_21_pus_uva.fits
! Reading UV FITS file: J1744+5542_X_2009_04_21_pus_uva.fits
! AN table 1: 379 integrations on 120 of 120 possible baselines.
! Apparent sampling: 0.729068 visibilities/baseline/integration-bin.
! Found source: J1744+5542
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 3297 lines of history.
! 
! Reading 132632 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1744+5542_X_2009_04_21_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 899 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 899 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 899 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 899 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.966482Jy  sigma=0.011222
! Fit after  self-cal, rms=0.886541Jy  sigma=0.010361
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=0.4765 mas, bmaj=0.5734 mas, bpa=-25.19 degrees
! Estimated noise=407.138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0847685 Jy
! Component: 100  -  total flux cleaned = 0.117323 Jy
! Total flux subtracted in 100 components = 0.117323 Jy
! Clean residual min=-0.005383 max=0.015996 Jy/beam
! Clean residual mean=-0.000014 rms=0.001272 Jy/beam
! Combined flux in latest and established models = 0.117323 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.117323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155037Jy  sigma=0.001673
! Fit after  self-cal, rms=0.154706Jy  sigma=0.001669
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194156 Jy
! Component: 100  -  total flux cleaned = 0.0303287 Jy
! Total flux subtracted in 100 components = 0.0303287 Jy
! Clean residual min=-0.004299 max=0.013062 Jy/beam
! Clean residual mean=-0.000014 rms=0.001067 Jy/beam
! Combined flux in latest and established models = 0.147651 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.147651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150259Jy  sigma=0.001620
! Fit after  self-cal, rms=0.150179Jy  sigma=0.001619
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Added new window around map position (-0.8, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116718 Jy
! Component: 100  -  total flux cleaned = 0.0183364 Jy
! Total flux subtracted in 100 components = 0.0183364 Jy
! Clean residual min=-0.003841 max=0.009277 Jy/beam
! Clean residual mean=-0.000014 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.165988 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.165988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148415Jy  sigma=0.001601
! Fit after  self-cal, rms=0.148276Jy  sigma=0.001600
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Added new window around map position (-1.6, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00789968 Jy
! Component: 100  -  total flux cleaned = 0.0128474 Jy
! Total flux subtracted in 100 components = 0.0128474 Jy
! Clean residual min=-0.003651 max=0.006131 Jy/beam
! Clean residual mean=-0.000014 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 0.178835 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 22 components and 0.178835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.147450Jy  sigma=0.001591
! Fit after  self-cal, rms=0.147372Jy  sigma=0.001590
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=0.5839 mas, bmaj=0.6769 mas, bpa=-24.41 degrees
! Estimated noise=182.027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.4, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102906 Jy
! Component: 100  -  total flux cleaned = 0.0170878 Jy
! Component: 150  -  total flux cleaned = 0.0219991 Jy
! Component: 200  -  total flux cleaned = 0.0256685 Jy
! Total flux subtracted in 200 components = 0.0256685 Jy
! Clean residual min=-0.003899 max=0.004737 Jy/beam
! Clean residual mean=-0.000135 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.204504 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 43 components and 0.204504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146499Jy  sigma=0.001581
! Fit after  self-cal, rms=0.146417Jy  sigma=0.001580
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.83     HN        1.17     KB        1.40     
!   KK        1.13     KP        0.91     LA        1.03     MK        1.01     
!   NL        0.98     NY        1.00*    OV        1.00     PT        0.99     
!   SC        0.98     TS        1.04     WZ        1.25     ZC        1.28     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.84     HN        1.16     KB        1.26     
!   KK        1.08     KP        0.85     LA        1.03     MK        0.98     
!   NL        0.97     NY        1.00*    OV        0.98     PT        1.02     
!   SC        1.01     TS        1.02     WZ        1.35     ZC        1.21     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.85     HN        1.13     KB        0.84     
!   KK        1.10     KP        0.77     LA        1.05     MK        1.00     
!   NL        1.03     NY        1.00*    OV        0.99     PT        1.04     
!   SC        1.04     TS        0.99     WZ        0.99     ZC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.83     HN        1.14     KB        0.88     
!   KK        1.10     KP        0.82     LA        1.06     MK        0.99     
!   NL        1.00     NY        1.00*    OV        1.01     PT        1.03     
!   SC        1.04     TS        0.96     WZ        1.05     ZC        1.03     
! 
! 
! Fit before self-cal, rms=0.146417Jy  sigma=0.001580
! Fit after  self-cal, rms=0.150970Jy  sigma=0.001562
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=0.5975 mas, bmaj=0.6876 mas, bpa=-26.22 degrees
! Estimated noise=185.661 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.8, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233497 Jy
! Component: 100  -  total flux cleaned = 0.00308133 Jy
! Component: 150  -  total flux cleaned = 0.00345324 Jy
! Component: 200  -  total flux cleaned = 0.00370939 Jy
! Total flux subtracted in 200 components = 0.00370939 Jy
! Clean residual min=-0.002040 max=0.001811 Jy/beam
! Clean residual mean=-0.000054 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.208213 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 61 components and 0.208213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150858Jy  sigma=0.001561
! Fit after  self-cal, rms=0.150961Jy  sigma=0.001560
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150961Jy  sigma=0.001560
! Fit after  self-cal, rms=0.152594Jy  sigma=0.001553
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=0.5991 mas, bmaj=0.6854 mas, bpa=-24.89 degrees
! Estimated noise=185.774 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000143151 Jy
! Component: 100  -  total flux cleaned = 0.000619676 Jy
! Component: 150  -  total flux cleaned = 0.00125986 Jy
! Component: 200  -  total flux cleaned = 0.00167463 Jy
! Total flux subtracted in 200 components = 0.00167463 Jy
! Clean residual min=-0.001384 max=0.001804 Jy/beam
! Clean residual mean=0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.209888 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 71 components and 0.209888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152558Jy  sigma=0.001553
! Fit after  self-cal, rms=0.152678Jy  sigma=0.001553
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.2, -4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134048 Jy
! Component: 100  -  total flux cleaned = 0.00211581 Jy
! Component: 150  -  total flux cleaned = 0.00284456 Jy
! Component: 200  -  total flux cleaned = 0.00342479 Jy
! Total flux subtracted in 200 components = 0.00342479 Jy
! Clean residual min=-0.001282 max=0.001359 Jy/beam
! Clean residual mean=-0.000016 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.213313 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 92 components and 0.213313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152651Jy  sigma=0.001552
! Fit after  self-cal, rms=0.152653Jy  sigma=0.001552
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152653Jy  sigma=0.001552
! Fit after  self-cal, rms=0.153310Jy  sigma=0.001552
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=0.6014 mas, bmaj=0.6852 mas, bpa=-24.28 degrees
! Estimated noise=185.809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138166 Jy
! Component: 100  -  total flux cleaned = 0.000484146 Jy
! Component: 150  -  total flux cleaned = 0.00101137 Jy
! Component: 200  -  total flux cleaned = 0.00125771 Jy
! Total flux subtracted in 200 components = 0.00125771 Jy
! Clean residual min=-0.001238 max=0.001323 Jy/beam
! Clean residual mean=-0.000007 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.21457 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 101 components and 0.21457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153297Jy  sigma=0.001552
! Fit after  self-cal, rms=0.153302Jy  sigma=0.001552
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000985254 Jy
! Component: 100  -  total flux cleaned = 0.00154245 Jy
! Component: 150  -  total flux cleaned = 0.00186312 Jy
! Component: 200  -  total flux cleaned = 0.00209447 Jy
! Total flux subtracted in 200 components = 0.00209447 Jy
! Clean residual min=-0.001219 max=0.001276 Jy/beam
! Clean residual mean=-0.000019 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.216665 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 114 components and 0.216665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153288Jy  sigma=0.001552
! Fit after  self-cal, rms=0.153288Jy  sigma=0.001552
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Added new window around map position (16, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000769863 Jy
! Component: 100  -  total flux cleaned = 0.000941059 Jy
! Component: 150  -  total flux cleaned = 0.0010158 Jy
! Component: 200  -  total flux cleaned = 0.00111135 Jy
! Total flux subtracted in 200 components = 0.00111135 Jy
! Clean residual min=-0.001233 max=0.001119 Jy/beam
! Clean residual mean=-0.000025 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.217776 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 127 components and 0.217776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153277Jy  sigma=0.001552
! Fit after  self-cal, rms=0.153277Jy  sigma=0.001552
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153277Jy  sigma=0.001552
! Fit after  self-cal, rms=0.153324Jy  sigma=0.001551
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=2.23 mas, bmaj=3.102 mas, bpa=43.74 degrees
! Estimated noise=299.107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123518 Jy
! Component: 100  -  total flux cleaned = 0.00161086 Jy
! Component: 150  -  total flux cleaned = 0.00179276 Jy
! Component: 200  -  total flux cleaned = 0.00187909 Jy
! Total flux subtracted in 200 components = 0.00187909 Jy
! Clean residual min=-0.001475 max=0.001319 Jy/beam
! Clean residual mean=-0.000081 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.219655 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 135 components and 0.219655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153320Jy  sigma=0.001551
! Fit after  self-cal, rms=0.153319Jy  sigma=0.001551
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030828 Jy
! Component: 100  -  total flux cleaned = 0.000400771 Jy
! Component: 150  -  total flux cleaned = 0.000433223 Jy
! Component: 200  -  total flux cleaned = 0.000476653 Jy
! Total flux subtracted in 200 components = 0.000476653 Jy
! Clean residual min=-0.001471 max=0.001219 Jy/beam
! Clean residual mean=-0.000092 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.220132 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 139 components and 0.220132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153318Jy  sigma=0.001551
! Fit after  self-cal, rms=0.153318Jy  sigma=0.001551
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=0.603 mas, bmaj=0.6852 mas, bpa=-23.93 degrees
! Estimated noise=185.778 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.603 x 0.6852 at -23.93 degrees (North through East)
! Clean map  min=-0.0009782  max=0.11486 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=0.4849 mas, bmaj=0.5759 mas, bpa=-24.99 degrees
! Estimated noise=427.228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0876645 Jy
! Component: 100  -  total flux cleaned = 0.121308 Jy
! Component: 150  -  total flux cleaned = 0.141102 Jy
! Component: 200  -  total flux cleaned = 0.154462 Jy
! Total flux subtracted in 200 components = 0.154462 Jy
! Clean residual min=-0.003078 max=0.007477 Jy/beam
! Clean residual mean=0.000001 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.154462 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.154462 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=0.603 mas, bmaj=0.6852 mas, bpa=-23.93 degrees
! Estimated noise=185.778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162573 Jy
! Component: 100  -  total flux cleaned = 0.0262394 Jy
! Component: 150  -  total flux cleaned = 0.0331695 Jy
! Component: 200  -  total flux cleaned = 0.0383133 Jy
! Total flux subtracted in 200 components = 0.0383133 Jy
! Clean residual min=-0.001532 max=0.003404 Jy/beam
! Clean residual mean=0.000112 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.192775 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 42 components and 0.192775 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Added new window around map position (-3.6, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00401066 Jy
! Component: 100  -  total flux cleaned = 0.00711304 Jy
! Component: 150  -  total flux cleaned = 0.00968987 Jy
! Component: 200  -  total flux cleaned = 0.0118611 Jy
! Total flux subtracted in 200 components = 0.0118611 Jy
! Clean residual min=-0.001360 max=0.001773 Jy/beam
! Clean residual mean=0.000055 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.204636 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 73 components and 0.204636 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Added new window around map position (-6, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197009 Jy
! Component: 100  -  total flux cleaned = 0.00362932 Jy
! Component: 150  -  total flux cleaned = 0.00509023 Jy
! Component: 200  -  total flux cleaned = 0.00638125 Jy
! Total flux subtracted in 200 components = 0.00638125 Jy
! Clean residual min=-0.001293 max=0.001153 Jy/beam
! Clean residual mean=0.000023 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.211017 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 101 components and 0.211017 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=2.23 mas, bmaj=3.102 mas, bpa=43.74 degrees
! Estimated noise=299.107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296059 Jy
! Component: 100  -  total flux cleaned = 0.00488325 Jy
! Component: 150  -  total flux cleaned = 0.00622461 Jy
! Component: 200  -  total flux cleaned = 0.00719679 Jy
! Total flux subtracted in 200 components = 0.00719679 Jy
! Clean residual min=-0.001548 max=0.001162 Jy/beam
! Clean residual mean=-0.000053 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.218214 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000681303 Jy
! Component: 100  -  total flux cleaned = 0.000968193 Jy
! Component: 150  -  total flux cleaned = 0.00121327 Jy
! Component: 200  -  total flux cleaned = 0.00144012 Jy
! Total flux subtracted in 200 components = 0.00144012 Jy
! Clean residual min=-0.001479 max=0.001120 Jy/beam
! Clean residual mean=-0.000082 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.219654 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 142 components and 0.219654 Jy
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! Estimated beam: bmin=0.603 mas, bmaj=0.6852 mas, bpa=-23.93 degrees
! Estimated noise=185.778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140198 Jy
! Component: 100  -  total flux cleaned = -0.000173835 Jy
! Component: 150  -  total flux cleaned = -0.000199025 Jy
! Component: 200  -  total flux cleaned = -0.000172901 Jy
! Total flux subtracted in 200 components = -0.000172901 Jy
! Clean residual min=-0.001172 max=0.000999 Jy/beam
! Clean residual mean=-0.000020 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.219481 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 160 components and 0.219481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153304Jy  sigma=0.001551
! Fit after  self-cal, rms=0.153292Jy  sigma=0.001551
wmodel J1744+5542_X_2009_04_21_pus_map.mod
! Writing 160 model components to file: J1744+5542_X_2009_04_21_pus_map.mod
wobs J1744+5542_X_2009_04_21_pus_uvs.fits
! Writing UV FITS file: J1744+5542_X_2009_04_21_pus_uvs.fits
wwins J1744+5542_X_2009_04_21_pus_map.win
! wwins: Wrote 10 windows to J1744+5542_X_2009_04_21_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000506371 Jy
! Component: 100  -  total flux cleaned = -0.000759178 Jy
! Component: 150  -  total flux cleaned = -0.00100096 Jy
! Component: 200  -  total flux cleaned = -0.0012351 Jy
! Component: 250  -  total flux cleaned = -0.00142827 Jy
! Component: 300  -  total flux cleaned = -0.00161759 Jy
! Component: 350  -  total flux cleaned = -0.00171899 Jy
! Component: 400  -  total flux cleaned = -0.00183548 Jy
! Component: 450  -  total flux cleaned = -0.00196664 Jy
! Component: 500  -  total flux cleaned = -0.00206361 Jy
! Component: 550  -  total flux cleaned = -0.00220725 Jy
! Component: 600  -  total flux cleaned = -0.00227032 Jy
! Component: 650  -  total flux cleaned = -0.00237964 Jy
! Component: 700  -  total flux cleaned = -0.00245693 Jy
! Component: 750  -  total flux cleaned = -0.0025333 Jy
! Component: 800  -  total flux cleaned = -0.00256383 Jy
! Component: 850  -  total flux cleaned = -0.00268412 Jy
! Component: 900  -  total flux cleaned = -0.00271398 Jy
! Component: 950  -  total flux cleaned = -0.00277322 Jy
! Component: 1000  -  total flux cleaned = -0.00278798 Jy
! Component: 1050  -  total flux cleaned = -0.00287562 Jy
! Component: 1100  -  total flux cleaned = -0.00287565 Jy
! Component: 1150  -  total flux cleaned = -0.00290452 Jy
! Component: 1200  -  total flux cleaned = -0.00297617 Jy
! Component: 1250  -  total flux cleaned = -0.0030186 Jy
! Component: 1300  -  total flux cleaned = -0.00303277 Jy
! Component: 1350  -  total flux cleaned = -0.00307479 Jy
! Component: 1400  -  total flux cleaned = -0.00306082 Jy
! Component: 1450  -  total flux cleaned = -0.00306088 Jy
! Component: 1500  -  total flux cleaned = -0.00312982 Jy
! Component: 1550  -  total flux cleaned = -0.00311607 Jy
! Component: 1600  -  total flux cleaned = -0.00315701 Jy
! Component: 1650  -  total flux cleaned = -0.00317062 Jy
! Component: 1700  -  total flux cleaned = -0.00319762 Jy
! Component: 1750  -  total flux cleaned = -0.00326477 Jy
! Component: 1800  -  total flux cleaned = -0.00325139 Jy
! Component: 1850  -  total flux cleaned = -0.00327792 Jy
! Component: 1900  -  total flux cleaned = -0.00327789 Jy
! Component: 1950  -  total flux cleaned = -0.00330422 Jy
! Component: 2000  -  total flux cleaned = -0.00327805 Jy
! Total flux subtracted in 2048 components = -0.00334339 Jy
! Clean residual min=-0.000654 max=0.000654 Jy/beam
! Clean residual mean=-0.000004 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.216138 Jy
keep
! Adding 197 model components to the UV plane model.
! The established model now contains 357 components and 0.216138 Jy
![Exited script file: muppet]
wmap "J1744+5542_X_2009_04_21_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.603 x 0.6852 at -23.93 degrees (North through East)
! Clean map  min=-0.00090473  max=0.11476 Jy/beam
! Writing clean map to FITS file: J1744+5542_X_2009_04_21_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.114758 
invert
! Inverting map 
! Your choice of large map pixels excluded 5.21% of the data.
!  The x-axis pixel size should ideally be below 0.1628 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000233123 
device "J1744+5542_X_2009_04_21_pus\_map.eps/VPS"
! Attempting to open device: 'J1744+5542_X_2009_04_21_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.609428 0.609428 1.21886 2.43771 4.87543 9.75085 19.5017 39.0034 78.0068
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.114 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.603 x 0.6852 at -23.93 degrees (North through East)
! Clean map  min=-0.00090473  max=0.11476 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1744+5542_X_2009_04_21_pus\_map.gif/vgif"
! Attempting to open device: 'J1744+5542_X_2009_04_21_pus_map.gif/vgif'
mapplot cln