! Started logfile: /scr/pima/rdv73_uvs/J2216+3518_X_uvs.log on Sat Jan 9 17:38:35 2016 obs /scr/pima/rdv73_uvs/J2216+3518_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv73_uvs/J2216+3518_X_uva.fits ! AN table 1: 18 integrations on 66 of 66 possible baselines. ! AN table 2: 26 integrations on 78 of 78 possible baselines. ! AN table 3: 3 integrations on 1 of 1 possible baselines. ! AN table 4: 17 integrations on 3 of 3 possible baselines. ! AN table 5: 4 integrations on 6 of 6 possible baselines. ! AN table 6: 18 integrations on 1 of 1 possible baselines. ! AN table 7: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.639495 visibilities/baseline/integration-bin. ! Found source: J2216+3518 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 10544 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv73_uvs/J2216+3518_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KK self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 4:ZC self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 5:ZC self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:ZC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 7:ZC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 142 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 38 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 142 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 38 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 142 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 38 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 142 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 38 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.065865Jy sigma=5.561278 ! Fit after self-cal, rms=0.685831Jy sigma=3.472522 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 1:ZC ! Flagging baselines of antenna 1:ZC in the currently selected channels. flag 2:KK ! Flagging baselines of antenna 2:KK in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 3:ZC ! Flagging baselines of antenna 3:ZC in the currently selected channels. flag 4:NY ! Flagging baselines of antenna 4:NY in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 4:ZC ! Flagging baselines of antenna 4:ZC in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 5:ZC ! Flagging baselines of antenna 5:ZC in the currently selected channels. flag 6:NY ! Flagging baselines of antenna 6:NY in the currently selected channels. flag 6:ZC ! Flagging baselines of antenna 6:ZC in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. flag 7:ZC ! Flagging baselines of antenna 7:ZC in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.83 mas, bmaj=1.539 mas, bpa=24.37 degrees ! Estimated noise=2.69117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257898 Jy ! Component: 100 - total flux cleaned = 0.323477 Jy ! Total flux subtracted in 100 components = 0.323477 Jy ! Clean residual min=-0.019697 max=0.033377 Jy/beam ! Clean residual mean=-0.000174 rms=0.005302 Jy/beam ! Combined flux in latest and established models = 0.323477 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.323477 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 63 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 46 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 63 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 46 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 63 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 46 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 63 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 46 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.146708Jy sigma=0.802056 ! Fit after self-cal, rms=0.146115Jy sigma=0.801354 ! Inverting map and beam ! Estimated beam: bmin=0.8286 mas, bmaj=1.544 mas, bpa=24.4 degrees ! Estimated noise=2.68583 mJy/beam. ! Added new window around map position (-1.4, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375455 Jy ! Component: 100 - total flux cleaned = 0.0629162 Jy ! Total flux subtracted in 100 components = 0.0629162 Jy ! Clean residual min=-0.019153 max=0.028386 Jy/beam ! Clean residual mean=-0.000085 rms=0.004574 Jy/beam ! Combined flux in latest and established models = 0.386393 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 0.386393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131214Jy sigma=0.689729 ! Fit after self-cal, rms=0.130899Jy sigma=0.687406 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=1.781 mas, bpa=23.5 degrees ! Estimated noise=1.70999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360873 Jy ! Component: 100 - total flux cleaned = 0.0587437 Jy ! Component: 150 - total flux cleaned = 0.0734439 Jy ! Component: 200 - total flux cleaned = 0.0807346 Jy ! Total flux subtracted in 200 components = 0.0807346 Jy ! Clean residual min=-0.018966 max=0.020940 Jy/beam ! Clean residual mean=0.000130 rms=0.003809 Jy/beam ! Combined flux in latest and established models = 0.467127 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 58 components and 0.467127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119415Jy sigma=0.610057 ! Fit after self-cal, rms=0.119267Jy sigma=0.609006 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.99 KP 0.94 ! LA 1.04 MK 0.75 NL 1.11 NY 1.00* ! OV 0.93 PT 0.94 SC 1.01 ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.93 HN 1.67 KK 1.00* ! KP 0.93 LA 1.01 MK 0.67 NL 1.10 ! NY 1.00* OV 0.88 PT 0.93 SC 0.96 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.90 FD 0.95 HN 1.84 KP 0.93 ! LA 1.12 NY 1.00* PT 0.98 SC 0.89 ! WZ 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.98 KP 0.88 ! LA 1.02 MK 0.74 NL 1.13 NY 1.00* ! OV 0.91 PT 0.98 SC 1.04 ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.94 HN 1.66 KK 1.00* ! KP 0.88 LA 1.01 MK 0.69 NL 1.09 ! NY 1.00* OV 0.88 PT 0.97 SC 0.98 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.87 FD 0.96 HN 1.90 KP 0.89 ! LA 1.07 NY 1.00* PT 1.04 SC 0.91 ! WZ 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.93 KP 0.81 ! LA 1.08 MK 0.76 NL 1.16 NY 1.00* ! OV 0.96 PT 0.99 SC 1.15 ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.93 HN 1.67 KK 1.00* ! KP 0.82 LA 1.06 MK 0.71 NL 1.13 ! NY 1.00* OV 0.92 PT 1.00 SC 1.06 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.94 FD 0.97 HN 1.77 KP 0.85 ! LA 1.12 NY 1.00* PT 1.04 SC 1.00 ! WZ 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.97 KP 0.87 ! LA 1.06 MK 0.78 NL 1.13 NY 1.00* ! OV 0.96 PT 1.00 SC 1.15 ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.95 HN 1.75 KK 1.00* ! KP 0.88 LA 1.07 MK 0.73 NL 1.08 ! NY 1.00* OV 0.90 PT 0.98 SC 1.05 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.93 FD 0.97 HN 1.93 KP 0.95 ! LA 1.13 NY 1.00* PT 1.03 SC 1.01 ! WZ 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.119267Jy sigma=0.609006 ! Fit after self-cal, rms=0.099198Jy sigma=0.429937 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.036 mas, bmaj=1.802 mas, bpa=24.57 degrees ! Estimated noise=1.71722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00856954 Jy ! Component: 100 - total flux cleaned = -0.00992097 Jy ! Component: 150 - total flux cleaned = -0.00993499 Jy ! Component: 200 - total flux cleaned = -0.00993002 Jy ! Total flux subtracted in 200 components = -0.00993002 Jy ! Clean residual min=-0.005650 max=0.004945 Jy/beam ! Clean residual mean=-0.000030 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.457197 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.457197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097098Jy sigma=0.415943 ! Fit after self-cal, rms=0.097407Jy sigma=0.415197 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097407Jy sigma=0.415197 ! Fit after self-cal, rms=0.098477Jy sigma=0.413409 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.038 mas, bmaj=1.796 mas, bpa=24.81 degrees ! Estimated noise=1.71307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00583709 Jy ! Component: 100 - total flux cleaned = -0.006482 Jy ! Component: 150 - total flux cleaned = -0.00664106 Jy ! Component: 200 - total flux cleaned = -0.00677819 Jy ! Total flux subtracted in 200 components = -0.00677819 Jy ! Clean residual min=-0.004422 max=0.004233 Jy/beam ! Clean residual mean=-0.000025 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.450419 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.450419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097589Jy sigma=0.407801 ! Fit after self-cal, rms=0.097599Jy sigma=0.407734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200927 Jy ! Component: 100 - total flux cleaned = 0.0025478 Jy ! Component: 150 - total flux cleaned = 0.00279152 Jy ! Component: 200 - total flux cleaned = 0.00312745 Jy ! Total flux subtracted in 200 components = 0.00312745 Jy ! Clean residual min=-0.004345 max=0.003450 Jy/beam ! Clean residual mean=-0.000018 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.453547 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 97 components and 0.453547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097171Jy sigma=0.405484 ! Fit after self-cal, rms=0.097156Jy sigma=0.405392 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097156Jy sigma=0.405392 ! Fit after self-cal, rms=0.098090Jy sigma=0.404420 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.041 mas, bmaj=1.793 mas, bpa=25.11 degrees ! Estimated noise=1.71336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0036536 Jy ! Component: 100 - total flux cleaned = -0.00340927 Jy ! Component: 150 - total flux cleaned = -0.00297838 Jy ! Component: 200 - total flux cleaned = -0.00278777 Jy ! Total flux subtracted in 200 components = -0.00278777 Jy ! Clean residual min=-0.003911 max=0.003111 Jy/beam ! Clean residual mean=-0.000014 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.450759 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 0.450759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097735Jy sigma=0.402366 ! Fit after self-cal, rms=0.097743Jy sigma=0.402339 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277804 Jy ! Component: 100 - total flux cleaned = 0.000611585 Jy ! Component: 150 - total flux cleaned = 0.000763885 Jy ! Component: 200 - total flux cleaned = 0.000835369 Jy ! Total flux subtracted in 200 components = 0.000835369 Jy ! Clean residual min=-0.003838 max=0.003115 Jy/beam ! Clean residual mean=-0.000012 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.451594 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 105 components and 0.451594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097573Jy sigma=0.401594 ! Fit after self-cal, rms=0.097570Jy sigma=0.401574 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097570Jy sigma=0.401574 ! Fit after self-cal, rms=0.098303Jy sigma=0.401101 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.319 mas, bmaj=2.715 mas, bpa=20.81 degrees ! Estimated noise=1.96721 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00238272 Jy ! Component: 100 - total flux cleaned = -0.00293542 Jy ! Component: 150 - total flux cleaned = -0.00293185 Jy ! Component: 200 - total flux cleaned = -0.0029725 Jy ! Total flux subtracted in 200 components = -0.0029725 Jy ! Clean residual min=-0.004300 max=0.003028 Jy/beam ! Clean residual mean=-0.000020 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.448622 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.448622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098217Jy sigma=0.400310 ! Fit after self-cal, rms=0.098220Jy sigma=0.400278 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.36564e-05 Jy ! Component: 100 - total flux cleaned = 6.34637e-05 Jy ! Component: 150 - total flux cleaned = 3.22355e-05 Jy ! Component: 200 - total flux cleaned = 9.07625e-05 Jy ! Total flux subtracted in 200 components = 9.07625e-05 Jy ! Clean residual min=-0.004191 max=0.002982 Jy/beam ! Clean residual mean=-0.000020 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.448712 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 139 components and 0.448712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098180Jy sigma=0.400075 ! Fit after self-cal, rms=0.098177Jy sigma=0.400067 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 1:SC,true ! 1:SC self-cal status=fixed weight=1 selfant 2:BR,true ! 2:BR self-cal status=fixed weight=1 selfant 2:FD,true ! 2:FD self-cal status=fixed weight=1 selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 2:KP,true ! 2:KP self-cal status=fixed weight=1 selfant 2:LA,true ! 2:LA self-cal status=fixed weight=1 selfant 2:MK,true ! 2:MK self-cal status=fixed weight=1 selfant 2:NL,true ! 2:NL self-cal status=fixed weight=1 selfant 2:OV,true ! 2:OV self-cal status=fixed weight=1 selfant 2:PT,true ! 2:PT self-cal status=fixed weight=1 selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 51 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 51 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 51 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 51 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.128850Jy sigma=0.520158 ! Fit after self-cal, rms=0.106975Jy sigma=0.437457 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KK self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 4:ZC self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 5:ZC self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:ZC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 7:ZC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.106975Jy sigma=0.437457 ! Fit after self-cal, rms=0.105226Jy sigma=0.425245 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.514 mas, bmaj=0.932 mas, bpa=-20.38 degrees ! Estimated noise=2.18264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00576477 Jy ! Component: 100 - total flux cleaned = -0.00752547 Jy ! Component: 150 - total flux cleaned = -0.00666251 Jy ! Component: 200 - total flux cleaned = -0.00743525 Jy ! Total flux subtracted in 200 components = -0.00743525 Jy ! Clean residual min=-0.007155 max=0.006405 Jy/beam ! Clean residual mean=0.000003 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.441277 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 157 components and 0.441277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103868Jy sigma=0.416400 ! Fit after self-cal, rms=0.103563Jy sigma=0.414336 ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.6392 mas, bmaj=1.103 mas, bpa=-16.96 degrees ! Estimated noise=1.37379 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00479288 Jy ! Component: 100 - total flux cleaned = -0.00558606 Jy ! Component: 150 - total flux cleaned = -0.00572566 Jy ! Component: 200 - total flux cleaned = -0.00598147 Jy ! Component: 250 - total flux cleaned = -0.00609696 Jy ! Component: 300 - total flux cleaned = -0.00631474 Jy ! Component: 350 - total flux cleaned = -0.00651962 Jy ! Component: 400 - total flux cleaned = -0.00661768 Jy ! Total flux subtracted in 400 components = -0.00661768 Jy ! Clean residual min=-0.005044 max=0.004002 Jy/beam ! Clean residual mean=0.000013 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.434659 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 181 components and 0.43466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102838Jy sigma=0.409660 ! Fit after self-cal, rms=0.102832Jy sigma=0.409492 ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123467 Jy ! Component: 100 - total flux cleaned = -0.000215373 Jy ! Component: 150 - total flux cleaned = -0.00039008 Jy ! Component: 200 - total flux cleaned = -0.000389395 Jy ! Component: 250 - total flux cleaned = -0.000470245 Jy ! Component: 300 - total flux cleaned = -0.000546839 Jy ! Component: 350 - total flux cleaned = -0.000547412 Jy ! Component: 400 - total flux cleaned = -0.000548072 Jy ! Total flux subtracted in 400 components = -0.000548072 Jy ! Clean residual min=-0.004525 max=0.003651 Jy/beam ! Clean residual mean=0.000012 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.434111 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 195 components and 0.434111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102553Jy sigma=0.407948 ! Fit after self-cal, rms=0.102560Jy sigma=0.407902 ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 157 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 51 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 44 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 157 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 51 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 44 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 157 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 51 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 44 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 157 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 51 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 44 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.114833Jy sigma=0.464980 ! Fit after self-cal, rms=0.104044Jy sigma=0.404441 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.6469 mas, bmaj=1.1 mas, bpa=-16.64 degrees ! Estimated noise=1.38488 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00359417 Jy ! Component: 100 - total flux cleaned = -0.00404887 Jy ! Component: 150 - total flux cleaned = -0.00456374 Jy ! Component: 200 - total flux cleaned = -0.00520902 Jy ! Component: 250 - total flux cleaned = -0.00575243 Jy ! Component: 300 - total flux cleaned = -0.00615089 Jy ! Component: 350 - total flux cleaned = -0.00644544 Jy ! Component: 400 - total flux cleaned = -0.00658332 Jy ! Total flux subtracted in 400 components = -0.00658332 Jy ! Clean residual min=-0.003475 max=0.003230 Jy/beam ! Clean residual mean=0.000008 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.427528 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 206 components and 0.427528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103413Jy sigma=0.401411 ! Fit after self-cal, rms=0.103434Jy sigma=0.401357 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211093 Jy ! Component: 100 - total flux cleaned = -0.000340472 Jy ! Component: 150 - total flux cleaned = -0.000461908 Jy ! Component: 200 - total flux cleaned = -0.000519248 Jy ! Component: 250 - total flux cleaned = -0.000519443 Jy ! Component: 300 - total flux cleaned = -0.000575175 Jy ! Component: 350 - total flux cleaned = -0.000628755 Jy ! Component: 400 - total flux cleaned = -0.000681741 Jy ! Total flux subtracted in 400 components = -0.000681741 Jy ! Clean residual min=-0.003333 max=0.003060 Jy/beam ! Clean residual mean=0.000007 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.426846 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 223 components and 0.426846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103289Jy sigma=0.400731 ! Fit after self-cal, rms=0.103290Jy sigma=0.400711 ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103290Jy sigma=0.400711 ! Fit after self-cal, rms=0.104582Jy sigma=0.399085 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.6522 mas, bmaj=1.099 mas, bpa=-16.37 degrees ! Estimated noise=1.39242 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00273248 Jy ! Component: 100 - total flux cleaned = -0.00318635 Jy ! Component: 150 - total flux cleaned = -0.0035588 Jy ! Component: 200 - total flux cleaned = -0.00395678 Jy ! Component: 250 - total flux cleaned = -0.00430355 Jy ! Component: 300 - total flux cleaned = -0.00449095 Jy ! Component: 350 - total flux cleaned = -0.00472084 Jy ! Component: 400 - total flux cleaned = -0.00488301 Jy ! Total flux subtracted in 400 components = -0.00488301 Jy ! Clean residual min=-0.003113 max=0.002784 Jy/beam ! Clean residual mean=0.000006 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.421963 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 228 components and 0.421963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104234Jy sigma=0.397491 ! Fit after self-cal, rms=0.104246Jy sigma=0.397461 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265829 Jy ! Component: 100 - total flux cleaned = -0.000368045 Jy ! Component: 150 - total flux cleaned = -0.000464983 Jy ! Component: 200 - total flux cleaned = -0.000558594 Jy ! Component: 250 - total flux cleaned = -0.000649148 Jy ! Component: 300 - total flux cleaned = -0.000649042 Jy ! Component: 350 - total flux cleaned = -0.000691461 Jy ! Component: 400 - total flux cleaned = -0.000733407 Jy ! Total flux subtracted in 400 components = -0.000733407 Jy ! Clean residual min=-0.003132 max=0.002637 Jy/beam ! Clean residual mean=0.000005 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.42123 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 237 components and 0.42123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104139Jy sigma=0.397048 ! Fit after self-cal, rms=0.104139Jy sigma=0.397031 ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104139Jy sigma=0.397031 ! Fit after self-cal, rms=0.104779Jy sigma=0.390872 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=2.286 mas, bmaj=2.702 mas, bpa=20.93 degrees ! Estimated noise=1.88174 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00279425 Jy ! Component: 100 - total flux cleaned = -0.00394153 Jy ! Component: 150 - total flux cleaned = -0.00421224 Jy ! Component: 200 - total flux cleaned = -0.00436389 Jy ! Component: 250 - total flux cleaned = -0.00445363 Jy ! Component: 300 - total flux cleaned = -0.0045346 Jy ! Component: 350 - total flux cleaned = -0.00460978 Jy ! Component: 400 - total flux cleaned = -0.00468042 Jy ! Total flux subtracted in 400 components = -0.00468042 Jy ! Clean residual min=-0.003438 max=0.002890 Jy/beam ! Clean residual mean=0.000008 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.41655 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 258 components and 0.41655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104776Jy sigma=0.390916 ! Fit after self-cal, rms=0.104778Jy sigma=0.390879 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.38701e-05 Jy ! Component: 100 - total flux cleaned = -7.25079e-05 Jy ! Component: 150 - total flux cleaned = -0.000107093 Jy ! Component: 200 - total flux cleaned = -0.000124296 Jy ! Component: 250 - total flux cleaned = -0.000155395 Jy ! Component: 300 - total flux cleaned = -0.000155104 Jy ! Component: 350 - total flux cleaned = -0.000169487 Jy ! Component: 400 - total flux cleaned = -0.000182991 Jy ! Total flux subtracted in 400 components = -0.000182991 Jy ! Clean residual min=-0.003430 max=0.002938 Jy/beam ! Clean residual mean=0.000007 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.416367 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 267 components and 0.416367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104755Jy sigma=0.390826 ! Fit after self-cal, rms=0.104754Jy sigma=0.390818 ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.6565 mas, bmaj=1.098 mas, bpa=-16.13 degrees ! Estimated noise=1.39912 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6565 x 1.098 at -16.13 degrees (North through East) ! Clean map min=-0.0058334 max=0.30786 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.523 mas, bmaj=0.9198 mas, bpa=-19.76 degrees ! Estimated noise=2.26225 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230547 Jy ! Component: 100 - total flux cleaned = 0.286972 Jy ! Component: 150 - total flux cleaned = 0.317115 Jy ! Component: 200 - total flux cleaned = 0.337146 Jy ! Component: 250 - total flux cleaned = 0.350956 Jy ! Component: 300 - total flux cleaned = 0.361276 Jy ! Component: 350 - total flux cleaned = 0.369495 Jy ! Component: 400 - total flux cleaned = 0.375608 Jy ! Total flux subtracted in 400 components = 0.375608 Jy ! Clean residual min=-0.005037 max=0.005311 Jy/beam ! Clean residual mean=-0.000032 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.375609 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.375609 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.6565 mas, bmaj=1.098 mas, bpa=-16.13 degrees ! Estimated noise=1.39912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111134 Jy ! Component: 100 - total flux cleaned = 0.0181994 Jy ! Component: 150 - total flux cleaned = 0.0234153 Jy ! Component: 200 - total flux cleaned = 0.027267 Jy ! Component: 250 - total flux cleaned = 0.0295579 Jy ! Component: 300 - total flux cleaned = 0.0314838 Jy ! Component: 350 - total flux cleaned = 0.032538 Jy ! Component: 400 - total flux cleaned = 0.0335156 Jy ! Total flux subtracted in 400 components = 0.0335156 Jy ! Clean residual min=-0.003253 max=0.003615 Jy/beam ! Clean residual mean=-0.000012 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.409124 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 84 components and 0.409124 Jy ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Added new window around map position (-2, 8.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116793 Jy ! Component: 100 - total flux cleaned = 0.00168468 Jy ! Component: 150 - total flux cleaned = 0.00206612 Jy ! Component: 200 - total flux cleaned = 0.0024309 Jy ! Component: 250 - total flux cleaned = 0.00277628 Jy ! Component: 300 - total flux cleaned = 0.00310716 Jy ! Component: 350 - total flux cleaned = 0.00334545 Jy ! Component: 400 - total flux cleaned = 0.00372677 Jy ! Total flux subtracted in 400 components = 0.00372677 Jy ! Clean residual min=-0.003158 max=0.002634 Jy/beam ! Clean residual mean=-0.000006 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.412851 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 119 components and 0.412851 Jy ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=2.286 mas, bmaj=2.702 mas, bpa=20.93 degrees ! Estimated noise=1.88174 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227288 Jy ! Component: 100 - total flux cleaned = 0.00298348 Jy ! Component: 150 - total flux cleaned = 0.00321994 Jy ! Component: 200 - total flux cleaned = 0.00347694 Jy ! Component: 250 - total flux cleaned = 0.00367185 Jy ! Component: 300 - total flux cleaned = 0.00381568 Jy ! Component: 350 - total flux cleaned = 0.00384914 Jy ! Component: 400 - total flux cleaned = 0.00391358 Jy ! Total flux subtracted in 400 components = 0.00391358 Jy ! Clean residual min=-0.003320 max=0.003163 Jy/beam ! Clean residual mean=0.000009 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.416764 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.07434e-05 Jy ! Component: 100 - total flux cleaned = 6.07358e-05 Jy ! Component: 150 - total flux cleaned = 8.85217e-05 Jy ! Component: 200 - total flux cleaned = 0.000114649 Jy ! Component: 250 - total flux cleaned = 8.86911e-05 Jy ! Component: 300 - total flux cleaned = 8.86884e-05 Jy ! Component: 350 - total flux cleaned = 0.000113312 Jy ! Component: 400 - total flux cleaned = 0.000113448 Jy ! Total flux subtracted in 400 components = 0.000113448 Jy ! Clean residual min=-0.003281 max=0.003161 Jy/beam ! Clean residual mean=0.000010 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.416878 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 159 components and 0.416878 Jy ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.6565 mas, bmaj=1.098 mas, bpa=-16.13 degrees ! Estimated noise=1.39912 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000969229 Jy ! Component: 100 - total flux cleaned = -0.0010387 Jy ! Component: 150 - total flux cleaned = -0.00109924 Jy ! Component: 200 - total flux cleaned = -0.000979158 Jy ! Component: 250 - total flux cleaned = -0.000865383 Jy ! Component: 300 - total flux cleaned = -0.00080965 Jy ! Component: 350 - total flux cleaned = -0.000754579 Jy ! Component: 400 - total flux cleaned = -0.000596592 Jy ! Total flux subtracted in 400 components = -0.000596592 Jy ! Clean residual min=-0.002778 max=0.002336 Jy/beam ! Clean residual mean=0.000001 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.416281 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 185 components and 0.416281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104574Jy sigma=0.390361 ! Fit after self-cal, rms=0.104458Jy sigma=0.389981 wmodel /scr/pima/rdv73_uvs/J2216+3518_X_map.mod ! Writing 185 model components to file: /scr/pima/rdv73_uvs/J2216+3518_X_map.mod wobs /scr/pima/rdv73_uvs/J2216+3518_X_uvs.fits ! Applying 833 buffered edits. ! Writing UV FITS file: /scr/pima/rdv73_uvs/J2216+3518_X_uvs.fits wwins /scr/pima/rdv73_uvs/J2216+3518_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rdv73_uvs/J2216+3518_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127563 Jy ! Component: 100 - total flux cleaned = -0.00233697 Jy ! Component: 150 - total flux cleaned = -0.00295543 Jy ! Component: 200 - total flux cleaned = -0.00334197 Jy ! Component: 250 - total flux cleaned = -0.00380282 Jy ! Component: 300 - total flux cleaned = -0.00409045 Jy ! Component: 350 - total flux cleaned = -0.00437302 Jy ! Component: 400 - total flux cleaned = -0.00461198 Jy ! Component: 450 - total flux cleaned = -0.00492574 Jy ! Component: 500 - total flux cleaned = -0.00515772 Jy ! Component: 550 - total flux cleaned = -0.00542576 Jy ! Component: 600 - total flux cleaned = -0.00557727 Jy ! Component: 650 - total flux cleaned = -0.00591389 Jy ! Component: 700 - total flux cleaned = -0.00609906 Jy ! Component: 750 - total flux cleaned = -0.00631899 Jy ! Component: 800 - total flux cleaned = -0.00642819 Jy ! Component: 850 - total flux cleaned = -0.00657274 Jy ! Component: 900 - total flux cleaned = -0.00678679 Jy ! Component: 950 - total flux cleaned = -0.0068929 Jy ! Component: 1000 - total flux cleaned = -0.00699847 Jy ! Component: 1050 - total flux cleaned = -0.00720688 Jy ! Component: 1100 - total flux cleaned = -0.00731055 Jy ! Component: 1150 - total flux cleaned = -0.00744752 Jy ! Component: 1200 - total flux cleaned = -0.00751519 Jy ! Component: 1250 - total flux cleaned = -0.00771784 Jy ! Component: 1300 - total flux cleaned = -0.00788529 Jy ! Component: 1350 - total flux cleaned = -0.00791837 Jy ! Component: 1400 - total flux cleaned = -0.00805067 Jy ! Component: 1450 - total flux cleaned = -0.00818195 Jy ! Component: 1500 - total flux cleaned = -0.00834513 Jy ! Component: 1550 - total flux cleaned = -0.00834486 Jy ! Component: 1600 - total flux cleaned = -0.00847385 Jy ! Component: 1650 - total flux cleaned = -0.00850599 Jy ! Component: 1700 - total flux cleaned = -0.00866483 Jy ! Component: 1750 - total flux cleaned = -0.00853782 Jy ! Component: 1800 - total flux cleaned = -0.00866308 Jy ! Component: 1850 - total flux cleaned = -0.00875679 Jy ! Component: 1900 - total flux cleaned = -0.00875704 Jy ! Component: 1950 - total flux cleaned = -0.00875711 Jy ! Component: 2000 - total flux cleaned = -0.00881883 Jy ! Component: 2050 - total flux cleaned = -0.00891067 Jy ! Component: 2100 - total flux cleaned = -0.00894116 Jy ! Component: 2150 - total flux cleaned = -0.00894128 Jy ! Component: 2200 - total flux cleaned = -0.00906151 Jy ! Component: 2250 - total flux cleaned = -0.00915108 Jy ! Component: 2300 - total flux cleaned = -0.00906184 Jy ! Component: 2350 - total flux cleaned = -0.00915048 Jy ! Component: 2400 - total flux cleaned = -0.00917992 Jy ! Component: 2450 - total flux cleaned = -0.00909189 Jy ! Component: 2500 - total flux cleaned = -0.0091502 Jy ! Component: 2550 - total flux cleaned = -0.00917937 Jy ! Component: 2600 - total flux cleaned = -0.00926622 Jy ! Component: 2650 - total flux cleaned = -0.00923735 Jy ! Component: 2700 - total flux cleaned = -0.00920857 Jy ! Component: 2750 - total flux cleaned = -0.00926572 Jy ! Component: 2800 - total flux cleaned = -0.00929399 Jy ! Component: 2850 - total flux cleaned = -0.0092092 Jy ! Component: 2900 - total flux cleaned = -0.00912475 Jy ! Component: 2950 - total flux cleaned = -0.00926515 Jy ! Component: 3000 - total flux cleaned = -0.00923713 Jy ! Component: 3050 - total flux cleaned = -0.00929285 Jy ! Component: 3100 - total flux cleaned = -0.0092929 Jy ! Component: 3150 - total flux cleaned = -0.00926538 Jy ! Component: 3200 - total flux cleaned = -0.00942987 Jy ! Component: 3250 - total flux cleaned = -0.00934796 Jy ! Component: 3300 - total flux cleaned = -0.00942962 Jy ! Component: 3350 - total flux cleaned = -0.00937532 Jy ! Component: 3400 - total flux cleaned = -0.00934843 Jy ! Component: 3450 - total flux cleaned = -0.00932137 Jy ! Component: 3500 - total flux cleaned = -0.00937489 Jy ! Component: 3550 - total flux cleaned = -0.00924161 Jy ! Component: 3600 - total flux cleaned = -0.009401 Jy ! Component: 3650 - total flux cleaned = -0.0092424 Jy ! Component: 3700 - total flux cleaned = -0.00929522 Jy ! Component: 3750 - total flux cleaned = -0.00929517 Jy ! Component: 3800 - total flux cleaned = -0.00913837 Jy ! Component: 3850 - total flux cleaned = -0.00908637 Jy ! Component: 3900 - total flux cleaned = -0.00913826 Jy ! Component: 3950 - total flux cleaned = -0.00913829 Jy ! Component: 4000 - total flux cleaned = -0.00903502 Jy ! Component: 4050 - total flux cleaned = -0.009035 Jy ! Total flux subtracted in 4096 components = -0.00890703 Jy ! Clean residual min=-0.001469 max=0.001492 Jy/beam ! Clean residual mean=0.000004 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.407374 Jy keep ! Adding 349 model components to the UV plane model. ! The established model now contains 534 components and 0.407374 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv73_uvs/J2216+3518_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6565 x 1.098 at -16.13 degrees (North through East) ! Clean map min=-0.0032115 max=0.31037 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv73_uvs/J2216+3518_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 3.14% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.3103 rms= 0.00042 Jy quit ! Quitting program ! Log file /scr/pima/rdv73_uvs/J2216+3518_X_uvs.log closed on Sat Jan 9 17:38:41 2016