! Started logfile: /scr/pima/rdv73_uvs/J2159-2516_S_uvs.log on Sat Jan 9 17:53:36 2016 obs /scr/pima/rdv73_uvs/J2159-2516_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv73_uvs/J2159-2516_S_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959811 visibilities/baseline/integration-bin. ! Found source: J2159-2516 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8120 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.4 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv73_uvs/J2159-2516_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.016152Jy sigma=3.973479 ! Fit after self-cal, rms=0.832536Jy sigma=3.234915 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.551 mas, bmaj=6.517 mas, bpa=-3.608 degrees ! Estimated noise=4.3995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130983 Jy ! Component: 100 - total flux cleaned = 0.159687 Jy ! Total flux subtracted in 100 components = 0.159687 Jy ! Clean residual min=-0.007864 max=0.015897 Jy/beam ! Clean residual mean=-0.000067 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 0.159687 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.159687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111672Jy sigma=0.398211 ! Fit after self-cal, rms=0.111667Jy sigma=0.398173 ! Inverting map ! Added new window around map position (-3.6, -7.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141154 Jy ! Component: 100 - total flux cleaned = 0.0223778 Jy ! Total flux subtracted in 100 components = 0.0223778 Jy ! Clean residual min=-0.007114 max=0.010875 Jy/beam ! Clean residual mean=-0.000043 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.182065 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.182065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109153Jy sigma=0.386712 ! Fit after self-cal, rms=0.109060Jy sigma=0.386203 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=8.01 mas, bpa=-2.553 degrees ! Estimated noise=2.19688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103241 Jy ! Component: 100 - total flux cleaned = 0.0159871 Jy ! Component: 150 - total flux cleaned = 0.0193031 Jy ! Component: 200 - total flux cleaned = 0.0212255 Jy ! Total flux subtracted in 200 components = 0.0212255 Jy ! Clean residual min=-0.007547 max=0.013214 Jy/beam ! Clean residual mean=-0.000045 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 0.203291 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.203291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108007Jy sigma=0.382553 ! Fit after self-cal, rms=0.108003Jy sigma=0.382333 ! Inverting map ! Added new window around map position (-5.2, 24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012069 Jy ! Component: 100 - total flux cleaned = 0.0182744 Jy ! Component: 150 - total flux cleaned = 0.0219101 Jy ! Component: 200 - total flux cleaned = 0.0239675 Jy ! Total flux subtracted in 200 components = 0.0239675 Jy ! Clean residual min=-0.006756 max=0.008003 Jy/beam ! Clean residual mean=-0.000031 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.227258 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 75 components and 0.227258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106656Jy sigma=0.376732 ! Fit after self-cal, rms=0.106491Jy sigma=0.376020 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.91 HN 1.17 KP 1.02 ! LA 0.99 MK 0.93 NL 1.03 OV 1.03 ! PT 1.07 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.45 KP 1.04 ! LA 0.94 MK 0.99 NL 1.02 OV 0.99 ! PT 1.07 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 1.48 KP 0.99 ! LA 0.84 MK 0.96 NL 1.16 OV 1.11 ! PT 1.09 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.95 HN 1.31 KP 0.94 ! LA 0.72 MK 1.06 NL 0.99 OV 0.84 ! PT 0.91 SC 0.98 ! ! ! Fit before self-cal, rms=0.106491Jy sigma=0.376020 ! Fit after self-cal, rms=0.108036Jy sigma=0.361142 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=7.94 mas, bpa=-2.226 degrees ! Estimated noise=2.23206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158312 Jy ! Component: 100 - total flux cleaned = -0.00108271 Jy ! Component: 150 - total flux cleaned = -0.000821222 Jy ! Component: 200 - total flux cleaned = -0.000817543 Jy ! Total flux subtracted in 200 components = -0.000817543 Jy ! Clean residual min=-0.004168 max=0.004229 Jy/beam ! Clean residual mean=-0.000016 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.22644 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.22644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107798Jy sigma=0.360540 ! Fit after self-cal, rms=0.107889Jy sigma=0.360315 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107889Jy sigma=0.360315 ! Fit after self-cal, rms=0.108656Jy sigma=0.360218 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=7.932 mas, bpa=-2.208 degrees ! Estimated noise=2.22436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195929 Jy ! Component: 100 - total flux cleaned = -0.00174188 Jy ! Component: 150 - total flux cleaned = -0.00186823 Jy ! Component: 200 - total flux cleaned = -0.00192679 Jy ! Total flux subtracted in 200 components = -0.00192679 Jy ! Clean residual min=-0.003954 max=0.004057 Jy/beam ! Clean residual mean=-0.000015 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.224514 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.224514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108513Jy sigma=0.359913 ! Fit after self-cal, rms=0.108505Jy sigma=0.359870 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000369964 Jy ! Component: 100 - total flux cleaned = -0.00026024 Jy ! Component: 150 - total flux cleaned = -0.000308597 Jy ! Component: 200 - total flux cleaned = -0.000395671 Jy ! Total flux subtracted in 200 components = -0.000395671 Jy ! Clean residual min=-0.003808 max=0.003910 Jy/beam ! Clean residual mean=-0.000017 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.224118 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.224118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108439Jy sigma=0.359728 ! Fit after self-cal, rms=0.108430Jy sigma=0.359712 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108430Jy sigma=0.359712 ! Fit after self-cal, rms=0.109270Jy sigma=0.358161 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.938 mas, bpa=-2.095 degrees ! Estimated noise=2.22064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000555267 Jy ! Component: 100 - total flux cleaned = -0.000558887 Jy ! Component: 150 - total flux cleaned = -0.000557614 Jy ! Component: 200 - total flux cleaned = -0.000596805 Jy ! Total flux subtracted in 200 components = -0.000596805 Jy ! Clean residual min=-0.003346 max=0.003550 Jy/beam ! Clean residual mean=-0.000022 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.223521 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 0.223521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109204Jy sigma=0.357975 ! Fit after self-cal, rms=0.109206Jy sigma=0.357940 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300343 Jy ! Component: 100 - total flux cleaned = -0.000262578 Jy ! Component: 150 - total flux cleaned = -0.000227188 Jy ! Component: 200 - total flux cleaned = -0.000257706 Jy ! Total flux subtracted in 200 components = -0.000257706 Jy ! Clean residual min=-0.003335 max=0.003476 Jy/beam ! Clean residual mean=-0.000022 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.223263 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 144 components and 0.223263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109179Jy sigma=0.357866 ! Fit after self-cal, rms=0.109175Jy sigma=0.357860 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109175Jy sigma=0.357860 ! Fit after self-cal, rms=0.109790Jy sigma=0.357713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.278 mas, bmaj=19.02 mas, bpa=3.442 degrees ! Estimated noise=2.57584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691692 Jy ! Component: 100 - total flux cleaned = 0.00051963 Jy ! Component: 150 - total flux cleaned = 0.000488021 Jy ! Component: 200 - total flux cleaned = 0.000461975 Jy ! Total flux subtracted in 200 components = 0.000461975 Jy ! Clean residual min=-0.003076 max=0.003790 Jy/beam ! Clean residual mean=-0.000033 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.223725 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 153 components and 0.223725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109784Jy sigma=0.357673 ! Fit after self-cal, rms=0.109792Jy sigma=0.357658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.67975e-05 Jy ! Component: 100 - total flux cleaned = 1.7727e-05 Jy ! Component: 150 - total flux cleaned = 2.01489e-05 Jy ! Component: 200 - total flux cleaned = 7.30335e-05 Jy ! Total flux subtracted in 200 components = 7.30335e-05 Jy ! Clean residual min=-0.003119 max=0.003697 Jy/beam ! Clean residual mean=-0.000034 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.223798 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 164 components and 0.223798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109793Jy sigma=0.357658 ! Fit after self-cal, rms=0.109791Jy sigma=0.357655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 1:SC,true ! 1:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109791Jy sigma=0.357655 ! Fit after self-cal, rms=0.109791Jy sigma=0.357655 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.109791Jy sigma=0.357655 ! Fit after self-cal, rms=0.109617Jy sigma=0.357625 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=6.443 mas, bpa=-2.829 degrees ! Estimated noise=4.48865 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (86.4, 68.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235362 Jy ! Component: 100 - total flux cleaned = 0.00235068 Jy ! Component: 150 - total flux cleaned = 0.00216478 Jy ! Component: 200 - total flux cleaned = 0.0017487 Jy ! Total flux subtracted in 200 components = 0.0017487 Jy ! Clean residual min=-0.004405 max=0.004807 Jy/beam ! Clean residual mean=-0.000018 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.225547 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 186 components and 0.225547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109552Jy sigma=0.357604 ! Fit after self-cal, rms=0.109549Jy sigma=0.357548 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=7.944 mas, bpa=-2.019 degrees ! Estimated noise=2.20889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196772 Jy ! Component: 100 - total flux cleaned = -0.00243458 Jy ! Component: 150 - total flux cleaned = -0.00258184 Jy ! Component: 200 - total flux cleaned = -0.0025793 Jy ! Component: 250 - total flux cleaned = -0.00261898 Jy ! Component: 300 - total flux cleaned = -0.00269327 Jy ! Component: 350 - total flux cleaned = -0.002761 Jy ! Component: 400 - total flux cleaned = -0.00279295 Jy ! Total flux subtracted in 400 components = -0.00279295 Jy ! Clean residual min=-0.003237 max=0.003160 Jy/beam ! Clean residual mean=-0.000019 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.222754 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 221 components and 0.222754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109456Jy sigma=0.357245 ! Fit after self-cal, rms=0.109452Jy sigma=0.357226 ! Inverting map ! Added new window around map position (11.6, -4.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298066 Jy ! Component: 100 - total flux cleaned = 0.00328438 Jy ! Component: 150 - total flux cleaned = 0.00344264 Jy ! Component: 200 - total flux cleaned = 0.00362373 Jy ! Component: 250 - total flux cleaned = 0.00366526 Jy ! Component: 300 - total flux cleaned = 0.00366489 Jy ! Component: 350 - total flux cleaned = 0.0037398 Jy ! Component: 400 - total flux cleaned = 0.00380949 Jy ! Total flux subtracted in 400 components = 0.00380949 Jy ! Clean residual min=-0.003191 max=0.002867 Jy/beam ! Clean residual mean=-0.000012 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.226564 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 275 components and 0.226564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109326Jy sigma=0.356750 ! Fit after self-cal, rms=0.109323Jy sigma=0.356699 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000647375 Jy ! Component: 100 - total flux cleaned = 0.000573465 Jy ! Component: 150 - total flux cleaned = 0.000540405 Jy ! Component: 200 - total flux cleaned = 0.000574522 Jy ! Component: 250 - total flux cleaned = 0.00060545 Jy ! Component: 300 - total flux cleaned = 0.000574643 Jy ! Component: 350 - total flux cleaned = 0.000603587 Jy ! Component: 400 - total flux cleaned = 0.000546939 Jy ! Total flux subtracted in 400 components = 0.000546939 Jy ! Clean residual min=-0.003181 max=0.002893 Jy/beam ! Clean residual mean=-0.000010 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.227111 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 305 components and 0.227111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109278Jy sigma=0.356572 ! Fit after self-cal, rms=0.109280Jy sigma=0.356564 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.109280Jy sigma=0.356564 ! Fit after self-cal, rms=0.109696Jy sigma=0.356490 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=7.95 mas, bpa=-1.982 degrees ! Estimated noise=2.20039 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000273028 Jy ! Component: 100 - total flux cleaned = -0.000194632 Jy ! Component: 150 - total flux cleaned = -0.000257312 Jy ! Component: 200 - total flux cleaned = -0.000285057 Jy ! Component: 250 - total flux cleaned = -0.00031276 Jy ! Component: 300 - total flux cleaned = -0.000312786 Jy ! Component: 350 - total flux cleaned = -0.000339274 Jy ! Component: 400 - total flux cleaned = -0.000390069 Jy ! Total flux subtracted in 400 components = -0.000390069 Jy ! Clean residual min=-0.003176 max=0.002781 Jy/beam ! Clean residual mean=-0.000009 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.22672 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 332 components and 0.22672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109651Jy sigma=0.356378 ! Fit after self-cal, rms=0.109661Jy sigma=0.356372 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.1192e-05 Jy ! Component: 100 - total flux cleaned = -0.000117361 Jy ! Component: 150 - total flux cleaned = -9.1744e-05 Jy ! Component: 200 - total flux cleaned = -6.84121e-05 Jy ! Component: 250 - total flux cleaned = -4.53516e-05 Jy ! Component: 300 - total flux cleaned = -4.56713e-05 Jy ! Component: 350 - total flux cleaned = -6.87641e-05 Jy ! Component: 400 - total flux cleaned = -6.8868e-05 Jy ! Total flux subtracted in 400 components = -6.8868e-05 Jy ! Clean residual min=-0.003142 max=0.002802 Jy/beam ! Clean residual mean=-0.000009 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.226652 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 352 components and 0.226652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109635Jy sigma=0.356313 ! Fit after self-cal, rms=0.109635Jy sigma=0.356312 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109635Jy sigma=0.356312 ! Fit after self-cal, rms=0.110240Jy sigma=0.356181 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=7.961 mas, bpa=-1.879 degrees ! Estimated noise=2.2001 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289095 Jy ! Component: 100 - total flux cleaned = -0.000481686 Jy ! Component: 150 - total flux cleaned = -0.000556243 Jy ! Component: 200 - total flux cleaned = -0.000579058 Jy ! Component: 250 - total flux cleaned = -0.00057889 Jy ! Component: 300 - total flux cleaned = -0.000623198 Jy ! Component: 350 - total flux cleaned = -0.000623189 Jy ! Component: 400 - total flux cleaned = -0.00064459 Jy ! Total flux subtracted in 400 components = -0.00064459 Jy ! Clean residual min=-0.003186 max=0.002637 Jy/beam ! Clean residual mean=-0.000011 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.226007 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 375 components and 0.226007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110209Jy sigma=0.356121 ! Fit after self-cal, rms=0.110218Jy sigma=0.356117 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151683 Jy ! Component: 100 - total flux cleaned = -0.000172399 Jy ! Component: 150 - total flux cleaned = -0.000152249 Jy ! Component: 200 - total flux cleaned = -0.000152543 Jy ! Component: 250 - total flux cleaned = -0.000172083 Jy ! Component: 300 - total flux cleaned = -0.000172046 Jy ! Component: 350 - total flux cleaned = -0.00019085 Jy ! Component: 400 - total flux cleaned = -0.000172084 Jy ! Total flux subtracted in 400 components = -0.000172084 Jy ! Clean residual min=-0.003151 max=0.002651 Jy/beam ! Clean residual mean=-0.000011 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.225835 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 387 components and 0.225835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110199Jy sigma=0.356079 ! Fit after self-cal, rms=0.110199Jy sigma=0.356078 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110199Jy sigma=0.356078 ! Fit after self-cal, rms=0.111418Jy sigma=0.350066 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.334 mas, bmaj=19.17 mas, bpa=3.518 degrees ! Estimated noise=2.5459 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000861293 Jy ! Component: 100 - total flux cleaned = 0.00122879 Jy ! Component: 150 - total flux cleaned = 0.00131019 Jy ! Component: 200 - total flux cleaned = 0.00140642 Jy ! Component: 250 - total flux cleaned = 0.00146174 Jy ! Component: 300 - total flux cleaned = 0.00153242 Jy ! Component: 350 - total flux cleaned = 0.00158265 Jy ! Component: 400 - total flux cleaned = 0.0016313 Jy ! Total flux subtracted in 400 components = 0.0016313 Jy ! Clean residual min=-0.002745 max=0.003171 Jy/beam ! Clean residual mean=-0.000019 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.227466 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 418 components and 0.227466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111407Jy sigma=0.350040 ! Fit after self-cal, rms=0.111449Jy sigma=0.349994 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26, -23.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305184 Jy ! Component: 100 - total flux cleaned = 0.00447846 Jy ! Component: 150 - total flux cleaned = 0.00534912 Jy ! Component: 200 - total flux cleaned = 0.00629196 Jy ! Component: 250 - total flux cleaned = 0.00693035 Jy ! Component: 300 - total flux cleaned = 0.00742858 Jy ! Component: 350 - total flux cleaned = 0.00793216 Jy ! Component: 400 - total flux cleaned = 0.00844149 Jy ! Total flux subtracted in 400 components = 0.00844149 Jy ! Clean residual min=-0.002342 max=0.002479 Jy/beam ! Clean residual mean=-0.000016 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.235908 Jy ! Performing phase self-cal ! Adding 109 model components to the UV plane model. ! The established model now contains 527 components and 0.235908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111342Jy sigma=0.349620 ! Fit after self-cal, rms=0.111337Jy sigma=0.349585 ! Inverting map ! Added new window around map position (92.8, -102.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140015 Jy ! Component: 100 - total flux cleaned = 0.00231986 Jy ! Component: 150 - total flux cleaned = 0.00293822 Jy ! Component: 200 - total flux cleaned = 0.0035384 Jy ! Component: 250 - total flux cleaned = 0.00401214 Jy ! Component: 300 - total flux cleaned = 0.00416146 Jy ! Component: 350 - total flux cleaned = 0.00437245 Jy ! Component: 400 - total flux cleaned = 0.00457256 Jy ! Total flux subtracted in 400 components = 0.00457256 Jy ! Clean residual min=-0.001997 max=0.001911 Jy/beam ! Clean residual mean=-0.000006 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.24048 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 590 components and 0.24048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111265Jy sigma=0.349358 ! Fit after self-cal, rms=0.111264Jy sigma=0.349343 ! Inverting map ! Added new window around map position (-102.4, 51.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025526 Jy ! Component: 100 - total flux cleaned = -0.000397253 Jy ! Component: 150 - total flux cleaned = -0.000954312 Jy ! Component: 200 - total flux cleaned = -0.001257 Jy ! Component: 250 - total flux cleaned = -0.00162088 Jy ! Component: 300 - total flux cleaned = -0.00187369 Jy ! Component: 350 - total flux cleaned = -0.0019526 Jy ! Component: 400 - total flux cleaned = -0.00198991 Jy ! Total flux subtracted in 400 components = -0.00198991 Jy ! Clean residual min=-0.001689 max=0.001398 Jy/beam ! Clean residual mean=-0.000011 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.23849 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 652 components and 0.238491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111132Jy sigma=0.348960 ! Fit after self-cal, rms=0.111130Jy sigma=0.348929 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=7.978 mas, bpa=-1.845 degrees ! Estimated noise=2.21105 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 7.978 at -1.845 degrees (North through East) ! Clean map min=-0.0028247 max=0.16777 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=6.465 mas, bpa=-2.57 degrees ! Estimated noise=4.52083 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134337 Jy ! Component: 100 - total flux cleaned = 0.163894 Jy ! Component: 150 - total flux cleaned = 0.174446 Jy ! Component: 200 - total flux cleaned = 0.179262 Jy ! Component: 250 - total flux cleaned = 0.181903 Jy ! Component: 300 - total flux cleaned = 0.1842 Jy ! Component: 350 - total flux cleaned = 0.186671 Jy ! Component: 400 - total flux cleaned = 0.188363 Jy ! Total flux subtracted in 400 components = 0.188363 Jy ! Clean residual min=-0.004166 max=0.004522 Jy/beam ! Clean residual mean=-0.000025 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.188363 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 81 model components to the UV plane model. ! The established model now contains 81 components and 0.188363 Jy ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=7.978 mas, bpa=-1.845 degrees ! Estimated noise=2.21105 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00799205 Jy ! Component: 100 - total flux cleaned = 0.0110605 Jy ! Component: 150 - total flux cleaned = 0.0135207 Jy ! Component: 200 - total flux cleaned = 0.0163023 Jy ! Component: 250 - total flux cleaned = 0.0181392 Jy ! Component: 300 - total flux cleaned = 0.0201493 Jy ! Component: 350 - total flux cleaned = 0.0213973 Jy ! Component: 400 - total flux cleaned = 0.0227628 Jy ! Total flux subtracted in 400 components = 0.0227628 Jy ! Clean residual min=-0.003151 max=0.002471 Jy/beam ! Clean residual mean=-0.000019 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.211126 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 170 components and 0.211126 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.334 mas, bmaj=19.17 mas, bpa=3.518 degrees ! Estimated noise=2.5459 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230901 Jy ! Component: 100 - total flux cleaned = 0.00388345 Jy ! Component: 150 - total flux cleaned = 0.00570564 Jy ! Component: 200 - total flux cleaned = 0.00695464 Jy ! Component: 250 - total flux cleaned = 0.00840784 Jy ! Component: 300 - total flux cleaned = 0.00970133 Jy ! Component: 350 - total flux cleaned = 0.0109839 Jy ! Component: 400 - total flux cleaned = 0.0121291 Jy ! Total flux subtracted in 400 components = 0.0121291 Jy ! Clean residual min=-0.002322 max=0.001879 Jy/beam ! Clean residual mean=-0.000012 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.223255 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108505 Jy ! Component: 100 - total flux cleaned = 0.00205512 Jy ! Component: 150 - total flux cleaned = 0.00298125 Jy ! Component: 200 - total flux cleaned = 0.00391824 Jy ! Component: 250 - total flux cleaned = 0.00481648 Jy ! Component: 300 - total flux cleaned = 0.00558905 Jy ! Component: 350 - total flux cleaned = 0.00641964 Jy ! Component: 400 - total flux cleaned = 0.00696959 Jy ! Total flux subtracted in 400 components = 0.00696959 Jy ! Clean residual min=-0.001928 max=0.001623 Jy/beam ! Clean residual mean=-0.000005 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.230224 Jy ! Adding 205 model components to the UV plane model. ! The established model now contains 371 components and 0.230225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=7.978 mas, bpa=-1.845 degrees ! Estimated noise=2.21105 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492021 Jy ! Component: 100 - total flux cleaned = 0.000566633 Jy ! Component: 150 - total flux cleaned = 0.00063403 Jy ! Component: 200 - total flux cleaned = 0.000433992 Jy ! Component: 250 - total flux cleaned = 0.000499167 Jy ! Component: 300 - total flux cleaned = 0.000374482 Jy ! Component: 350 - total flux cleaned = 0.000313044 Jy ! Component: 400 - total flux cleaned = 0.000135544 Jy ! Total flux subtracted in 400 components = 0.000135544 Jy ! Clean residual min=-0.002305 max=0.001850 Jy/beam ! Clean residual mean=-0.000007 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.23036 Jy selfcal ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 448 components and 0.23036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111040Jy sigma=0.348535 ! Fit after self-cal, rms=0.110974Jy sigma=0.348459 wmodel /scr/pima/rdv73_uvs/J2159-2516_S_map.mod ! Writing 448 model components to file: /scr/pima/rdv73_uvs/J2159-2516_S_map.mod wobs /scr/pima/rdv73_uvs/J2159-2516_S_uvs.fits ! Applying 1670 buffered edits. ! Writing UV FITS file: /scr/pima/rdv73_uvs/J2159-2516_S_uvs.fits wwins /scr/pima/rdv73_uvs/J2159-2516_S_map.win ! wwins: Wrote 8 windows to /scr/pima/rdv73_uvs/J2159-2516_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000787468 Jy ! Component: 100 - total flux cleaned = -0.00123258 Jy ! Component: 150 - total flux cleaned = -0.00152314 Jy ! Component: 200 - total flux cleaned = -0.00195616 Jy ! Component: 250 - total flux cleaned = -0.00237602 Jy ! Component: 300 - total flux cleaned = -0.00269777 Jy ! Component: 350 - total flux cleaned = -0.00286917 Jy ! Component: 400 - total flux cleaned = -0.00309336 Jy ! Component: 450 - total flux cleaned = -0.00331349 Jy ! Component: 500 - total flux cleaned = -0.0035296 Jy ! Component: 550 - total flux cleaned = -0.00366231 Jy ! Component: 600 - total flux cleaned = -0.00384593 Jy ! Component: 650 - total flux cleaned = -0.00402678 Jy ! Component: 700 - total flux cleaned = -0.00405216 Jy ! Component: 750 - total flux cleaned = -0.00410284 Jy ! Component: 800 - total flux cleaned = -0.00422801 Jy ! Component: 850 - total flux cleaned = -0.00437569 Jy ! Component: 900 - total flux cleaned = -0.00440024 Jy ! Component: 950 - total flux cleaned = -0.00447251 Jy ! Component: 1000 - total flux cleaned = -0.00456747 Jy ! Component: 1050 - total flux cleaned = -0.00463813 Jy ! Component: 1100 - total flux cleaned = -0.00468479 Jy ! Component: 1150 - total flux cleaned = -0.00482351 Jy ! Component: 1200 - total flux cleaned = -0.00491509 Jy ! Component: 1250 - total flux cleaned = -0.00500561 Jy ! Component: 1300 - total flux cleaned = -0.00507268 Jy ! Component: 1350 - total flux cleaned = -0.00516142 Jy ! Component: 1400 - total flux cleaned = -0.00520531 Jy ! Component: 1450 - total flux cleaned = -0.00531427 Jy ! Component: 1500 - total flux cleaned = -0.00527105 Jy ! Component: 1550 - total flux cleaned = -0.00529256 Jy ! Component: 1600 - total flux cleaned = -0.00529236 Jy ! Component: 1650 - total flux cleaned = -0.00529251 Jy ! Component: 1700 - total flux cleaned = -0.00533442 Jy ! Component: 1750 - total flux cleaned = -0.00535508 Jy ! Component: 1800 - total flux cleaned = -0.00535506 Jy ! Component: 1850 - total flux cleaned = -0.00537558 Jy ! Component: 1900 - total flux cleaned = -0.00533492 Jy ! Component: 1950 - total flux cleaned = -0.00537552 Jy ! Component: 2000 - total flux cleaned = -0.00535542 Jy ! Component: 2050 - total flux cleaned = -0.00539547 Jy ! Component: 2100 - total flux cleaned = -0.00543525 Jy ! Component: 2150 - total flux cleaned = -0.00541538 Jy ! Component: 2200 - total flux cleaned = -0.00545463 Jy ! Component: 2250 - total flux cleaned = -0.00541564 Jy ! Component: 2300 - total flux cleaned = -0.00541566 Jy ! Component: 2350 - total flux cleaned = -0.0053963 Jy ! Component: 2400 - total flux cleaned = -0.00539639 Jy ! Component: 2450 - total flux cleaned = -0.00543454 Jy ! Component: 2500 - total flux cleaned = -0.00545345 Jy ! Component: 2550 - total flux cleaned = -0.00539673 Jy ! Component: 2600 - total flux cleaned = -0.0054155 Jy ! Component: 2650 - total flux cleaned = -0.00535957 Jy ! Component: 2700 - total flux cleaned = -0.00534115 Jy ! Component: 2750 - total flux cleaned = -0.00532273 Jy ! Component: 2800 - total flux cleaned = -0.00535949 Jy ! Component: 2850 - total flux cleaned = -0.00530469 Jy ! Component: 2900 - total flux cleaned = -0.00530475 Jy ! Component: 2950 - total flux cleaned = -0.00534094 Jy ! Component: 3000 - total flux cleaned = -0.00530498 Jy ! Component: 3050 - total flux cleaned = -0.00534082 Jy ! Component: 3100 - total flux cleaned = -0.00528754 Jy ! Component: 3150 - total flux cleaned = -0.00537621 Jy ! Component: 3200 - total flux cleaned = -0.00535858 Jy ! Component: 3250 - total flux cleaned = -0.0053938 Jy ! Component: 3300 - total flux cleaned = -0.00537645 Jy ! Component: 3350 - total flux cleaned = -0.00539375 Jy ! Component: 3400 - total flux cleaned = -0.00539385 Jy ! Component: 3450 - total flux cleaned = -0.00544554 Jy ! Component: 3500 - total flux cleaned = -0.00551397 Jy ! Component: 3550 - total flux cleaned = -0.00547992 Jy ! Component: 3600 - total flux cleaned = -0.00553095 Jy ! Component: 3650 - total flux cleaned = -0.00561559 Jy ! Component: 3700 - total flux cleaned = -0.00569959 Jy ! Component: 3750 - total flux cleaned = -0.00569954 Jy ! Component: 3800 - total flux cleaned = -0.00578302 Jy ! Component: 3850 - total flux cleaned = -0.00576632 Jy ! Component: 3900 - total flux cleaned = -0.00571663 Jy ! Component: 3950 - total flux cleaned = -0.00579913 Jy ! Component: 4000 - total flux cleaned = -0.00579911 Jy ! Component: 4050 - total flux cleaned = -0.00584816 Jy ! Total flux subtracted in 4096 components = -0.005897 Jy ! Clean residual min=-0.001000 max=0.001318 Jy/beam ! Clean residual mean=-0.000001 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.224463 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 709 components and 0.224463 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv73_uvs/J2159-2516_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 7.978 at -1.845 degrees (North through East) ! Clean map min=-0.0034309 max=0.17213 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv73_uvs/J2159-2516_S_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.1721 rms= 0.0003 Jy quit ! Quitting program ! Log file /scr/pima/rdv73_uvs/J2159-2516_S_uvs.log closed on Sat Jan 9 17:53:43 2016