! Started logfile: /scr/pima/rdv73_uvs/J1415+1320_X_uvs.log on Sat Jan 9 17:35:37 2016 obs /scr/pima/rdv73_uvs/J1415+1320_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv73_uvs/J1415+1320_X_uva.fits ! AN table 1: 30 integrations on 3 of 3 possible baselines. ! AN table 2: 9 integrations on 1 of 1 possible baselines. ! AN table 3: 32 integrations on 28 of 28 possible baselines. ! AN table 4: 31 integrations on 55 of 55 possible baselines. ! AN table 5: 31 integrations on 45 of 45 possible baselines. ! AN table 6: 9 integrations on 45 of 45 possible baselines. ! AN table 7: 7 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.857549 visibilities/baseline/integration-bin. ! Found source: J1415+1320 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 15676 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv73_uvs/J1415+1320_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 2:ZC self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:FD self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:KP self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:OV self-cal status=correctable weight=1 ! 4:PT self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 4:ZC self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KK self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:KK self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 7 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 7 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 7 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 7 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.165382Jy sigma=5.540128 ! Fit after self-cal, rms=0.524743Jy sigma=2.520488 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 1:ZC ! Flagging baselines of antenna 1:ZC in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 2:ZC ! Flagging baselines of antenna 2:ZC in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 3:ZC ! Flagging baselines of antenna 3:ZC in the currently selected channels. flag 4:NY ! Flagging baselines of antenna 4:NY in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 4:ZC ! Flagging baselines of antenna 4:ZC in the currently selected channels. flag 5:NY ! Flagging baselines of antenna 5:NY in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 6:KK ! Flagging baselines of antenna 6:KK in the currently selected channels. flag 7:KK ! Flagging baselines of antenna 7:KK in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9415 mas, bmaj=1.461 mas, bpa=13.91 degrees ! Estimated noise=3.05781 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.460068 Jy ! Component: 100 - total flux cleaned = 0.590839 Jy ! Total flux subtracted in 100 components = 0.590839 Jy ! Clean residual min=-0.040879 max=0.080116 Jy/beam ! Clean residual mean=0.000030 rms=0.009549 Jy/beam ! Combined flux in latest and established models = 0.590839 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.590839 Jy ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 3. ! A total of 85 telescope corrections were flagged in sub-array 4. ! A total of 66 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 3. ! A total of 85 telescope corrections were flagged in sub-array 4. ! A total of 66 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 3. ! A total of 85 telescope corrections were flagged in sub-array 4. ! A total of 66 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 3. ! A total of 85 telescope corrections were flagged in sub-array 4. ! A total of 66 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.251685Jy sigma=1.059280 ! Fit after self-cal, rms=0.251311Jy sigma=1.056839 ! Inverting map and beam ! Estimated beam: bmin=0.9415 mas, bmaj=1.461 mas, bpa=13.91 degrees ! Estimated noise=3.05805 mJy/beam. ! Added new window around map position (-1.4, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0799769 Jy ! Component: 100 - total flux cleaned = 0.105919 Jy ! Total flux subtracted in 100 components = 0.105919 Jy ! Clean residual min=-0.035083 max=0.061190 Jy/beam ! Clean residual mean=0.000006 rms=0.008038 Jy/beam ! Combined flux in latest and established models = 0.696757 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.696757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211181Jy sigma=0.850713 ! Fit after self-cal, rms=0.209348Jy sigma=0.841962 ! Inverting map ! Added new window around map position (1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602278 Jy ! Component: 100 - total flux cleaned = 0.0768216 Jy ! Total flux subtracted in 100 components = 0.0768216 Jy ! Clean residual min=-0.033619 max=0.047694 Jy/beam ! Clean residual mean=-0.000011 rms=0.006815 Jy/beam ! Combined flux in latest and established models = 0.773579 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.773579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185271Jy sigma=0.727603 ! Fit after self-cal, rms=0.184273Jy sigma=0.722094 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.329 mas, bmaj=1.887 mas, bpa=23.19 degrees ! Estimated noise=1.76514 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189557 Jy ! Component: 100 - total flux cleaned = 0.0223145 Jy ! Component: 150 - total flux cleaned = 0.0197268 Jy ! Component: 200 - total flux cleaned = 0.0197656 Jy ! Total flux subtracted in 200 components = 0.0197656 Jy ! Clean residual min=-0.033291 max=0.029076 Jy/beam ! Clean residual mean=-0.000058 rms=0.006376 Jy/beam ! Combined flux in latest and established models = 0.793345 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.793345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169955Jy sigma=0.656843 ! Fit after self-cal, rms=0.169722Jy sigma=0.655881 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 1.61 LA 1.14 NY 1.00* ! PT 1.01 SC 0.78 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 FD 0.94 HN 1.45 KP 0.96 ! LA 1.08 NY 1.00* OV 0.99 PT 1.00 ! SC 0.91 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 0.90 HN 1.42 KP 0.86 ! LA 1.07 NY 1.00* OV 0.93 PT 0.97 ! SC 0.96 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.89 FD 0.92 HN 1.56 KK 1.00* ! KP 1.01 LA 1.08 MK 0.95 OV 0.92 ! PT 0.95 SC 0.92 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.95 KK 1.00* KP 0.90 MK 0.70 ! OV 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 HN 1.64 LA 1.14 NY 1.00* ! PT 1.08 SC 0.77 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.91 FD 0.96 HN 1.47 KP 0.91 ! LA 1.07 NY 1.00* OV 0.97 PT 1.05 ! SC 0.95 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 0.91 HN 1.36 KP 0.83 ! LA 1.06 NY 1.00* OV 0.92 PT 1.02 ! SC 0.97 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.87 FD 0.92 HN 1.65 KK 1.00* ! KP 0.95 LA 1.07 MK 0.96 OV 0.88 ! PT 1.02 SC 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.91 KK 1.00* KP 0.84 MK 0.73 ! OV 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.05 HN 1.55 LA 1.17 NY 1.00* ! PT 1.09 SC 0.80 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.96 HN 1.40 KP 0.85 ! LA 1.11 NY 1.00* OV 1.01 PT 1.06 ! SC 0.98 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.91 HN 1.40 KP 0.75 ! LA 1.12 NY 1.00* OV 0.97 PT 1.02 ! SC 1.00 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.94 FD 0.91 HN 1.71 KK 1.00* ! KP 0.88 LA 1.11 MK 1.01 OV 0.92 ! PT 1.02 SC 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.91 KK 1.00* KP 0.80 MK 0.77 ! OV 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.07 HN 1.65 LA 1.19 NY 1.00* ! PT 1.05 SC 0.83 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.92 FD 0.98 HN 1.48 KP 0.89 ! LA 1.14 NY 1.00* OV 1.00 PT 1.04 ! SC 0.98 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 0.94 HN 1.53 KP 0.79 ! LA 1.13 NY 1.00* OV 0.96 PT 1.00 ! SC 0.98 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.88 FD 0.94 HN 1.81 KK 1.00* ! KP 0.94 LA 1.12 MK 1.04 OV 0.92 ! PT 1.01 SC 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.92 KK 1.00* KP 0.86 MK 0.80 ! OV 1.04 ! ! ! Fit before self-cal, rms=0.169722Jy sigma=0.655881 ! Fit after self-cal, rms=0.123836Jy sigma=0.463496 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.32 mas, bmaj=1.898 mas, bpa=29.28 degrees ! Estimated noise=1.82992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059277 Jy ! Component: 100 - total flux cleaned = -0.00146548 Jy ! Component: 150 - total flux cleaned = -0.00107233 Jy ! Component: 200 - total flux cleaned = -0.0010701 Jy ! Total flux subtracted in 200 components = -0.0010701 Jy ! Clean residual min=-0.011664 max=0.011310 Jy/beam ! Clean residual mean=-0.000009 rms=0.002415 Jy/beam ! Combined flux in latest and established models = 0.792275 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 62 components and 0.792275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120267Jy sigma=0.451413 ! Fit after self-cal, rms=0.120280Jy sigma=0.450925 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120280Jy sigma=0.450925 ! Fit after self-cal, rms=0.120656Jy sigma=0.449910 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.321 mas, bmaj=1.901 mas, bpa=29.76 degrees ! Estimated noise=1.82869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226371 Jy ! Component: 100 - total flux cleaned = -0.00257989 Jy ! Component: 150 - total flux cleaned = -0.00256924 Jy ! Component: 200 - total flux cleaned = -0.00281238 Jy ! Total flux subtracted in 200 components = -0.00281238 Jy ! Clean residual min=-0.011164 max=0.010840 Jy/beam ! Clean residual mean=-0.000009 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 0.789462 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 73 components and 0.789462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118878Jy sigma=0.443780 ! Fit after self-cal, rms=0.118845Jy sigma=0.443658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053159 Jy ! Component: 100 - total flux cleaned = 0.000737303 Jy ! Component: 150 - total flux cleaned = 0.000536421 Jy ! Component: 200 - total flux cleaned = 0.000720203 Jy ! Total flux subtracted in 200 components = 0.000720203 Jy ! Clean residual min=-0.010844 max=0.010493 Jy/beam ! Clean residual mean=-0.000008 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 0.790182 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 84 components and 0.790182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118091Jy sigma=0.440699 ! Fit after self-cal, rms=0.118059Jy sigma=0.440606 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118059Jy sigma=0.440606 ! Fit after self-cal, rms=0.118799Jy sigma=0.439681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.322 mas, bmaj=1.905 mas, bpa=30.22 degrees ! Estimated noise=1.83216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00271649 Jy ! Component: 100 - total flux cleaned = -0.00251235 Jy ! Component: 150 - total flux cleaned = -0.00232768 Jy ! Component: 200 - total flux cleaned = -0.00215842 Jy ! Total flux subtracted in 200 components = -0.00215842 Jy ! Clean residual min=-0.010647 max=0.010469 Jy/beam ! Clean residual mean=-0.000008 rms=0.002136 Jy/beam ! Combined flux in latest and established models = 0.788024 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 0.788024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118043Jy sigma=0.436634 ! Fit after self-cal, rms=0.118030Jy sigma=0.436543 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483686 Jy ! Component: 100 - total flux cleaned = 0.000630783 Jy ! Component: 150 - total flux cleaned = 0.000626007 Jy ! Component: 200 - total flux cleaned = 0.000755842 Jy ! Total flux subtracted in 200 components = 0.000755842 Jy ! Clean residual min=-0.010331 max=0.010281 Jy/beam ! Clean residual mean=-0.000008 rms=0.002102 Jy/beam ! Combined flux in latest and established models = 0.78878 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 99 components and 0.78878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117667Jy sigma=0.434971 ! Fit after self-cal, rms=0.117642Jy sigma=0.434911 ! Inverting map ! Added new window around map position (-10, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00981547 Jy ! Component: 100 - total flux cleaned = 0.0150166 Jy ! Component: 150 - total flux cleaned = 0.0184408 Jy ! Component: 200 - total flux cleaned = 0.0201477 Jy ! Total flux subtracted in 200 components = 0.0201477 Jy ! Clean residual min=-0.009233 max=0.008547 Jy/beam ! Clean residual mean=-0.000012 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.808928 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.808928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116742Jy sigma=0.429720 ! Fit after self-cal, rms=0.116678Jy sigma=0.429373 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116678Jy sigma=0.429373 ! Fit after self-cal, rms=0.117046Jy sigma=0.428569 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.696 mas, bmaj=3.019 mas, bpa=73.61 degrees ! Estimated noise=2.09978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032037 Jy ! Component: 100 - total flux cleaned = 0.00435423 Jy ! Component: 150 - total flux cleaned = 0.00514889 Jy ! Component: 200 - total flux cleaned = 0.00545835 Jy ! Total flux subtracted in 200 components = 0.00545835 Jy ! Clean residual min=-0.010183 max=0.010185 Jy/beam ! Clean residual mean=-0.000018 rms=0.002210 Jy/beam ! Combined flux in latest and established models = 0.814386 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 141 components and 0.814386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116855Jy sigma=0.427196 ! Fit after self-cal, rms=0.116836Jy sigma=0.427018 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481222 Jy ! Component: 100 - total flux cleaned = 0.000899694 Jy ! Component: 150 - total flux cleaned = 0.00117982 Jy ! Component: 200 - total flux cleaned = 0.00135257 Jy ! Total flux subtracted in 200 components = 0.00135257 Jy ! Clean residual min=-0.009912 max=0.010092 Jy/beam ! Clean residual mean=-0.000018 rms=0.002167 Jy/beam ! Combined flux in latest and established models = 0.815738 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 147 components and 0.815738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116709Jy sigma=0.426368 ! Fit after self-cal, rms=0.116704Jy sigma=0.426294 ! Inverting map ! Added new window around map position (16, 11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00861476 Jy ! Component: 100 - total flux cleaned = 0.00965995 Jy ! Component: 150 - total flux cleaned = 0.00997837 Jy ! Component: 200 - total flux cleaned = 0.0102595 Jy ! Total flux subtracted in 200 components = 0.0102595 Jy ! Clean residual min=-0.008429 max=0.006438 Jy/beam ! Clean residual mean=-0.000013 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 0.825998 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 197 components and 0.825998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116117Jy sigma=0.422713 ! Fit after self-cal, rms=0.116057Jy sigma=0.422486 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 3:FD,true ! 3:FD self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:LA,true ! 3:LA self-cal status=fixed weight=1 selfant 3:PT,true ! 3:PT self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 4:BR,true ! 4:BR self-cal status=fixed weight=1 selfant 4:FD,true ! 4:FD self-cal status=fixed weight=1 selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 4:KP,true ! 4:KP self-cal status=fixed weight=1 selfant 4:LA,true ! 4:LA self-cal status=fixed weight=1 selfant 4:OV,true ! 4:OV self-cal status=fixed weight=1 selfant 4:PT,true ! 4:PT self-cal status=fixed weight=1 selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 5:BR,true ! 5:BR self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:KP,true ! 5:KP self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:OV,true ! 5:OV self-cal status=fixed weight=1 selfant 5:PT,true ! 5:PT self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 6:BR,true ! 6:BR self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:MK,true ! 6:MK self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:MK,true ! 7:MK self-cal status=fixed weight=1 selfant 7:OV,true ! 7:OV self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.147403Jy sigma=0.630968 ! Fit after self-cal, rms=0.132506Jy sigma=0.469452 selfant "",false ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 2:ZC self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:FD self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:KP self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:OV self-cal status=correctable weight=1 ! 4:PT self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 4:ZC self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KK self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:KK self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.132506Jy sigma=0.469452 ! Fit after self-cal, rms=0.128591Jy sigma=0.438112 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=0.505 mas, bmaj=1.324 mas, bpa=-12.17 degrees ! Estimated noise=2.40558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00457588 Jy ! Component: 100 - total flux cleaned = -0.00795113 Jy ! Component: 150 - total flux cleaned = -0.00980054 Jy ! Component: 200 - total flux cleaned = -0.010793 Jy ! Total flux subtracted in 200 components = -0.010793 Jy ! Clean residual min=-0.008394 max=0.010348 Jy/beam ! Clean residual mean=-0.000001 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.815205 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 212 components and 0.815205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126504Jy sigma=0.429707 ! Fit after self-cal, rms=0.125541Jy sigma=0.426468 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Added new window around map position (-7.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033647 Jy ! Component: 100 - total flux cleaned = 0.00186691 Jy ! Component: 150 - total flux cleaned = 0.000510098 Jy ! Component: 200 - total flux cleaned = -0.000524787 Jy ! Total flux subtracted in 200 components = -0.000524787 Jy ! Clean residual min=-0.007395 max=0.007642 Jy/beam ! Clean residual mean=-0.000001 rms=0.001580 Jy/beam ! Combined flux in latest and established models = 0.81468 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 232 components and 0.81468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124551Jy sigma=0.422683 ! Fit after self-cal, rms=0.124500Jy sigma=0.422439 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Added new window around map position (-10.2, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539931 Jy ! Component: 100 - total flux cleaned = 0.00491204 Jy ! Component: 150 - total flux cleaned = 0.0040145 Jy ! Component: 200 - total flux cleaned = 0.00379905 Jy ! Total flux subtracted in 200 components = 0.00379905 Jy ! Clean residual min=-0.006788 max=0.006568 Jy/beam ! Clean residual mean=-0.000001 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.818479 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 247 components and 0.818479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123921Jy sigma=0.420515 ! Fit after self-cal, rms=0.123892Jy sigma=0.420331 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=0.5755 mas, bmaj=1.548 mas, bpa=-12.07 degrees ! Estimated noise=1.45427 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521182 Jy ! Component: 100 - total flux cleaned = 0.00775344 Jy ! Component: 150 - total flux cleaned = 0.0093082 Jy ! Component: 200 - total flux cleaned = 0.00994286 Jy ! Component: 250 - total flux cleaned = 0.0106777 Jy ! Component: 300 - total flux cleaned = 0.0109565 Jy ! Component: 350 - total flux cleaned = 0.0112212 Jy ! Component: 400 - total flux cleaned = 0.0113429 Jy ! Total flux subtracted in 400 components = 0.0113429 Jy ! Clean residual min=-0.007070 max=0.006027 Jy/beam ! Clean residual mean=-0.000015 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.829822 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 281 components and 0.829822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122956Jy sigma=0.417138 ! Fit after self-cal, rms=0.122911Jy sigma=0.416971 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00073113 Jy ! Component: 100 - total flux cleaned = 0.000738906 Jy ! Component: 150 - total flux cleaned = 0.000743524 Jy ! Component: 200 - total flux cleaned = 0.000746191 Jy ! Component: 250 - total flux cleaned = 0.000638928 Jy ! Component: 300 - total flux cleaned = 0.000640635 Jy ! Component: 350 - total flux cleaned = 0.000641256 Jy ! Component: 400 - total flux cleaned = 0.00074168 Jy ! Total flux subtracted in 400 components = 0.00074168 Jy ! Clean residual min=-0.006583 max=0.005892 Jy/beam ! Clean residual mean=-0.000014 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.830563 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 310 components and 0.830563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122514Jy sigma=0.415617 ! Fit after self-cal, rms=0.122492Jy sigma=0.415572 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 42 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 7 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 42 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 7 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 42 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 7 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 42 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 7 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.134789Jy sigma=0.515279 ! Fit after self-cal, rms=0.122621Jy sigma=0.413279 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=0.5741 mas, bmaj=1.551 mas, bpa=-12.05 degrees ! Estimated noise=1.45661 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00344567 Jy ! Component: 100 - total flux cleaned = -0.00439444 Jy ! Component: 150 - total flux cleaned = -0.00481308 Jy ! Component: 200 - total flux cleaned = -0.00506583 Jy ! Component: 250 - total flux cleaned = -0.00494942 Jy ! Component: 300 - total flux cleaned = -0.0049468 Jy ! Component: 350 - total flux cleaned = -0.00483973 Jy ! Component: 400 - total flux cleaned = -0.00464035 Jy ! Total flux subtracted in 400 components = -0.00464035 Jy ! Clean residual min=-0.005726 max=0.005405 Jy/beam ! Clean residual mean=-0.000011 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.825923 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 338 components and 0.825923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122103Jy sigma=0.411098 ! Fit after self-cal, rms=0.122090Jy sigma=0.411012 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219523 Jy ! Component: 100 - total flux cleaned = -2.76067e-05 Jy ! Component: 150 - total flux cleaned = -2.84769e-05 Jy ! Component: 200 - total flux cleaned = 6.01894e-05 Jy ! Component: 250 - total flux cleaned = 0.000144721 Jy ! Component: 300 - total flux cleaned = -2.43524e-05 Jy ! Component: 350 - total flux cleaned = 5.88003e-05 Jy ! Component: 400 - total flux cleaned = -2.15314e-05 Jy ! Total flux subtracted in 400 components = -2.15314e-05 Jy ! Clean residual min=-0.005451 max=0.005310 Jy/beam ! Clean residual mean=-0.000010 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.825902 Jy ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 369 components and 0.825902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121848Jy sigma=0.410129 ! Fit after self-cal, rms=0.121832Jy sigma=0.410094 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121832Jy sigma=0.410094 ! Fit after self-cal, rms=0.122055Jy sigma=0.409409 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=0.5735 mas, bmaj=1.551 mas, bpa=-12.03 degrees ! Estimated noise=1.45673 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00326361 Jy ! Component: 100 - total flux cleaned = -0.00409617 Jy ! Component: 150 - total flux cleaned = -0.00473531 Jy ! Component: 200 - total flux cleaned = -0.00473855 Jy ! Component: 250 - total flux cleaned = -0.00492414 Jy ! Component: 300 - total flux cleaned = -0.00509956 Jy ! Component: 350 - total flux cleaned = -0.00509868 Jy ! Component: 400 - total flux cleaned = -0.00526177 Jy ! Total flux subtracted in 400 components = -0.00526177 Jy ! Clean residual min=-0.004993 max=0.004867 Jy/beam ! Clean residual mean=-0.000009 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.82064 Jy selfcal ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 385 components and 0.82064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121781Jy sigma=0.408217 ! Fit after self-cal, rms=0.121774Jy sigma=0.408177 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275318 Jy ! Component: 100 - total flux cleaned = -0.00027606 Jy ! Component: 150 - total flux cleaned = -0.000352115 Jy ! Component: 200 - total flux cleaned = -0.000426213 Jy ! Component: 250 - total flux cleaned = -0.000427187 Jy ! Component: 300 - total flux cleaned = -0.000571236 Jy ! Component: 350 - total flux cleaned = -0.00057221 Jy ! Component: 400 - total flux cleaned = -0.000641453 Jy ! Total flux subtracted in 400 components = -0.000641453 Jy ! Clean residual min=-0.004734 max=0.004760 Jy/beam ! Clean residual mean=-0.000009 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.819998 Jy ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 400 components and 0.819998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121610Jy sigma=0.407564 ! Fit after self-cal, rms=0.121600Jy sigma=0.407541 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121600Jy sigma=0.407541 ! Fit after self-cal, rms=0.111075Jy sigma=0.373030 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=2.657 mas, bmaj=2.948 mas, bpa=52.96 degrees ! Estimated noise=2.01473 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0033033 Jy ! Component: 100 - total flux cleaned = -0.00369585 Jy ! Component: 150 - total flux cleaned = -0.00414654 Jy ! Component: 200 - total flux cleaned = -0.00439205 Jy ! Component: 250 - total flux cleaned = -0.00461137 Jy ! Component: 300 - total flux cleaned = -0.00488117 Jy ! Component: 350 - total flux cleaned = -0.00500357 Jy ! Component: 400 - total flux cleaned = -0.00506019 Jy ! Total flux subtracted in 400 components = -0.00506019 Jy ! Clean residual min=-0.005681 max=0.005342 Jy/beam ! Clean residual mean=-0.000022 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.814938 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 437 components and 0.814938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110963Jy sigma=0.372460 ! Fit after self-cal, rms=0.110960Jy sigma=0.372361 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013741 Jy ! Component: 100 - total flux cleaned = 8.09036e-05 Jy ! Component: 150 - total flux cleaned = 3.11579e-05 Jy ! Component: 200 - total flux cleaned = -6.81791e-05 Jy ! Component: 250 - total flux cleaned = -0.000116844 Jy ! Component: 300 - total flux cleaned = -0.000162443 Jy ! Component: 350 - total flux cleaned = -0.000251572 Jy ! Component: 400 - total flux cleaned = -0.00029343 Jy ! Total flux subtracted in 400 components = -0.00029343 Jy ! Clean residual min=-0.005435 max=0.005174 Jy/beam ! Clean residual mean=-0.000022 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.814645 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 464 components and 0.814645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110923Jy sigma=0.372152 ! Fit after self-cal, rms=0.110907Jy sigma=0.372109 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=0.5731 mas, bmaj=1.553 mas, bpa=-12.02 degrees ! Estimated noise=1.45658 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5731 x 1.553 at -12.02 degrees (North through East) ! Clean map min=-0.014562 max=0.51766 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110907Jy sigma=0.372109 ! Fit after self-cal, rms=0.107688Jy sigma=0.349875 ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=0.5731 mas, bmaj=1.554 mas, bpa=-12.02 degrees ! Estimated noise=1.45422 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00306297 Jy ! Component: 100 - total flux cleaned = -0.00355627 Jy ! Component: 150 - total flux cleaned = -0.00382382 Jy ! Component: 200 - total flux cleaned = -0.00414734 Jy ! Component: 250 - total flux cleaned = -0.0043756 Jy ! Component: 300 - total flux cleaned = -0.00437323 Jy ! Component: 350 - total flux cleaned = -0.00437397 Jy ! Component: 400 - total flux cleaned = -0.00437402 Jy ! Total flux subtracted in 400 components = -0.00437402 Jy ! Clean residual min=-0.004350 max=0.003703 Jy/beam ! Clean residual mean=-0.000007 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.810271 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 476 components and 0.810271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107466Jy sigma=0.348972 ! Fit after self-cal, rms=0.107458Jy sigma=0.348936 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.53763e-05 Jy ! Component: 100 - total flux cleaned = 4.81849e-05 Jy ! Component: 150 - total flux cleaned = 4.89164e-05 Jy ! Component: 200 - total flux cleaned = -1.42787e-05 Jy ! Component: 250 - total flux cleaned = -0.000136613 Jy ! Component: 300 - total flux cleaned = -0.000194668 Jy ! Component: 350 - total flux cleaned = -0.000252438 Jy ! Component: 400 - total flux cleaned = -0.000366251 Jy ! Total flux subtracted in 400 components = -0.000366251 Jy ! Clean residual min=-0.004086 max=0.003680 Jy/beam ! Clean residual mean=-0.000007 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.809905 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 491 components and 0.809905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107325Jy sigma=0.348516 ! Fit after self-cal, rms=0.107319Jy sigma=0.348497 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107319Jy sigma=0.348497 ! Fit after self-cal, rms=0.107426Jy sigma=0.348137 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=0.5007 mas, bmaj=1.328 mas, bpa=-12.08 degrees ! Estimated noise=2.40605 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.423898 Jy ! Component: 100 - total flux cleaned = 0.543323 Jy ! Component: 150 - total flux cleaned = 0.603831 Jy ! Component: 200 - total flux cleaned = 0.638002 Jy ! Component: 250 - total flux cleaned = 0.661783 Jy ! Component: 300 - total flux cleaned = 0.679996 Jy ! Component: 350 - total flux cleaned = 0.69435 Jy ! Component: 400 - total flux cleaned = 0.705814 Jy ! Total flux subtracted in 400 components = 0.705814 Jy ! Clean residual min=-0.008547 max=0.008241 Jy/beam ! Clean residual mean=0.000006 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.705814 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.705814 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=0.5729 mas, bmaj=1.555 mas, bpa=-12.01 degrees ! Estimated noise=1.45274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180914 Jy ! Component: 100 - total flux cleaned = 0.0302739 Jy ! Component: 150 - total flux cleaned = 0.0399037 Jy ! Component: 200 - total flux cleaned = 0.0465678 Jy ! Component: 250 - total flux cleaned = 0.0521921 Jy ! Component: 300 - total flux cleaned = 0.057779 Jy ! Component: 350 - total flux cleaned = 0.0623638 Jy ! Component: 400 - total flux cleaned = 0.0667937 Jy ! Total flux subtracted in 400 components = 0.0667937 Jy ! Clean residual min=-0.006013 max=0.006611 Jy/beam ! Clean residual mean=-0.000004 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.772608 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 89 components and 0.772608 Jy ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Added new window around map position (-4.4, -1.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00662101 Jy ! Component: 100 - total flux cleaned = 0.0096774 Jy ! Component: 150 - total flux cleaned = 0.0124368 Jy ! Component: 200 - total flux cleaned = 0.0146485 Jy ! Component: 250 - total flux cleaned = 0.0164097 Jy ! Component: 300 - total flux cleaned = 0.018227 Jy ! Component: 350 - total flux cleaned = 0.019803 Jy ! Component: 400 - total flux cleaned = 0.0210316 Jy ! Total flux subtracted in 400 components = 0.0210316 Jy ! Clean residual min=-0.005126 max=0.004095 Jy/beam ! Clean residual mean=-0.000006 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.79364 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 146 components and 0.793639 Jy ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=2.667 mas, bmaj=2.961 mas, bpa=53.16 degrees ! Estimated noise=2.00324 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571131 Jy ! Component: 100 - total flux cleaned = 0.00864634 Jy ! Component: 150 - total flux cleaned = 0.0102331 Jy ! Component: 200 - total flux cleaned = 0.0113796 Jy ! Component: 250 - total flux cleaned = 0.0125114 Jy ! Component: 300 - total flux cleaned = 0.0133367 Jy ! Component: 350 - total flux cleaned = 0.0140144 Jy ! Component: 400 - total flux cleaned = 0.0145663 Jy ! Total flux subtracted in 400 components = 0.0145663 Jy ! Clean residual min=-0.005918 max=0.005405 Jy/beam ! Clean residual mean=-0.000018 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.808206 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525194 Jy ! Component: 100 - total flux cleaned = 0.00110531 Jy ! Component: 150 - total flux cleaned = 0.00142205 Jy ! Component: 200 - total flux cleaned = 0.00165152 Jy ! Component: 250 - total flux cleaned = 0.00194346 Jy ! Component: 300 - total flux cleaned = 0.00208577 Jy ! Component: 350 - total flux cleaned = 0.00215657 Jy ! Component: 400 - total flux cleaned = 0.0024229 Jy ! Total flux subtracted in 400 components = 0.0024229 Jy ! Clean residual min=-0.005374 max=0.005162 Jy/beam ! Clean residual mean=-0.000019 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.810629 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 238 components and 0.810628 Jy ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! Estimated beam: bmin=0.5729 mas, bmaj=1.555 mas, bpa=-12.01 degrees ! Estimated noise=1.45274 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156498 Jy ! Component: 100 - total flux cleaned = -0.00145139 Jy ! Component: 150 - total flux cleaned = -0.00145153 Jy ! Component: 200 - total flux cleaned = -0.00144996 Jy ! Component: 250 - total flux cleaned = -0.0014501 Jy ! Component: 300 - total flux cleaned = -0.00154053 Jy ! Component: 350 - total flux cleaned = -0.00153621 Jy ! Component: 400 - total flux cleaned = -0.00144578 Jy ! Total flux subtracted in 400 components = -0.00144578 Jy ! Clean residual min=-0.003963 max=0.003925 Jy/beam ! Clean residual mean=-0.000007 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.809183 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 270 components and 0.809183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107753Jy sigma=0.349057 ! Fit after self-cal, rms=0.107603Jy sigma=0.348241 wmodel /scr/pima/rdv73_uvs/J1415+1320_X_map.mod ! Writing 270 model components to file: /scr/pima/rdv73_uvs/J1415+1320_X_map.mod wobs /scr/pima/rdv73_uvs/J1415+1320_X_uvs.fits ! Applying 1835 buffered edits. ! Writing UV FITS file: /scr/pima/rdv73_uvs/J1415+1320_X_uvs.fits wwins /scr/pima/rdv73_uvs/J1415+1320_X_map.win ! wwins: Wrote 9 windows to /scr/pima/rdv73_uvs/J1415+1320_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360423 Jy ! Component: 100 - total flux cleaned = 7.84997e-05 Jy ! Component: 150 - total flux cleaned = 0.000256389 Jy ! Component: 200 - total flux cleaned = 8.73539e-05 Jy ! Component: 250 - total flux cleaned = -0.000133469 Jy ! Component: 300 - total flux cleaned = -0.000455675 Jy ! Component: 350 - total flux cleaned = -0.000612962 Jy ! Component: 400 - total flux cleaned = -0.000768868 Jy ! Component: 450 - total flux cleaned = -0.00102235 Jy ! Component: 500 - total flux cleaned = -0.00122135 Jy ! Component: 550 - total flux cleaned = -0.00146396 Jy ! Component: 600 - total flux cleaned = -0.00146378 Jy ! Component: 650 - total flux cleaned = -0.00165221 Jy ! Component: 700 - total flux cleaned = -0.0016989 Jy ! Component: 750 - total flux cleaned = -0.00188245 Jy ! Component: 800 - total flux cleaned = -0.00183656 Jy ! Component: 850 - total flux cleaned = -0.00201525 Jy ! Component: 900 - total flux cleaned = -0.00201508 Jy ! Component: 950 - total flux cleaned = -0.0021028 Jy ! Component: 1000 - total flux cleaned = -0.00223316 Jy ! Component: 1050 - total flux cleaned = -0.00227615 Jy ! Component: 1100 - total flux cleaned = -0.00248848 Jy ! Component: 1150 - total flux cleaned = -0.00248809 Jy ! Component: 1200 - total flux cleaned = -0.0024881 Jy ! Component: 1250 - total flux cleaned = -0.0025294 Jy ! Component: 1300 - total flux cleaned = -0.00269315 Jy ! Component: 1350 - total flux cleaned = -0.00253093 Jy ! Component: 1400 - total flux cleaned = -0.00249066 Jy ! Component: 1450 - total flux cleaned = -0.00261057 Jy ! Component: 1500 - total flux cleaned = -0.00253125 Jy ! Component: 1550 - total flux cleaned = -0.00257038 Jy ! Component: 1600 - total flux cleaned = -0.00241473 Jy ! Component: 1650 - total flux cleaned = -0.00256943 Jy ! Component: 1700 - total flux cleaned = -0.002531 Jy ! Component: 1750 - total flux cleaned = -0.00256916 Jy ! Component: 1800 - total flux cleaned = -0.00268243 Jy ! Component: 1850 - total flux cleaned = -0.00264497 Jy ! Component: 1900 - total flux cleaned = -0.00286834 Jy ! Component: 1950 - total flux cleaned = -0.00294257 Jy ! Component: 2000 - total flux cleaned = -0.003126 Jy ! Component: 2050 - total flux cleaned = -0.00305306 Jy ! Component: 2100 - total flux cleaned = -0.00316199 Jy ! Component: 2150 - total flux cleaned = -0.00330632 Jy ! Component: 2200 - total flux cleaned = -0.00330613 Jy ! Component: 2250 - total flux cleaned = -0.00351992 Jy ! Component: 2300 - total flux cleaned = -0.00352019 Jy ! Component: 2350 - total flux cleaned = -0.00355562 Jy ! Component: 2400 - total flux cleaned = -0.00366039 Jy ! Component: 2450 - total flux cleaned = -0.00383413 Jy ! Component: 2500 - total flux cleaned = -0.00404147 Jy ! Component: 2550 - total flux cleaned = -0.00400717 Jy ! Component: 2600 - total flux cleaned = -0.00417776 Jy ! Component: 2650 - total flux cleaned = -0.00417782 Jy ! Component: 2700 - total flux cleaned = -0.00427925 Jy ! Component: 2750 - total flux cleaned = -0.00448052 Jy ! Component: 2800 - total flux cleaned = -0.00434676 Jy ! Component: 2850 - total flux cleaned = -0.00444638 Jy ! Component: 2900 - total flux cleaned = -0.0045454 Jy ! Component: 2950 - total flux cleaned = -0.00457839 Jy ! Component: 3000 - total flux cleaned = -0.00467674 Jy ! Component: 3050 - total flux cleaned = -0.00483896 Jy ! Component: 3100 - total flux cleaned = -0.0049679 Jy ! Component: 3150 - total flux cleaned = -0.00509662 Jy ! Component: 3200 - total flux cleaned = -0.00512846 Jy ! Component: 3250 - total flux cleaned = -0.00509622 Jy ! Component: 3300 - total flux cleaned = -0.00525448 Jy ! Component: 3350 - total flux cleaned = -0.00528615 Jy ! Component: 3400 - total flux cleaned = -0.0052864 Jy ! Component: 3450 - total flux cleaned = -0.00544243 Jy ! Component: 3500 - total flux cleaned = -0.00547353 Jy ! Component: 3550 - total flux cleaned = -0.00550429 Jy ! Component: 3600 - total flux cleaned = -0.00562721 Jy ! Component: 3650 - total flux cleaned = -0.00565754 Jy ! Component: 3700 - total flux cleaned = -0.00571819 Jy ! Component: 3750 - total flux cleaned = -0.00571807 Jy ! Component: 3800 - total flux cleaned = -0.00580841 Jy ! Component: 3850 - total flux cleaned = -0.00583835 Jy ! Component: 3900 - total flux cleaned = -0.00580867 Jy ! Component: 3950 - total flux cleaned = -0.00586811 Jy ! Component: 4000 - total flux cleaned = -0.00598656 Jy ! Component: 4050 - total flux cleaned = -0.00601577 Jy ! Total flux subtracted in 4096 components = -0.00619185 Jy ! Clean residual min=-0.001840 max=0.001503 Jy/beam ! Clean residual mean=-0.000004 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.802991 Jy keep ! Adding 353 model components to the UV plane model. ! The established model now contains 623 components and 0.80299 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv73_uvs/J1415+1320_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5729 x 1.555 at -12.01 degrees (North through East) ! Clean map min=-0.0067609 max=0.53286 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv73_uvs/J1415+1320_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 5.54% of the data. ! The x-axis pixel size should ideally be below 0.1769 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.5328 rms= 0.00049 Jy quit ! Quitting program ! Log file /scr/pima/rdv73_uvs/J1415+1320_X_uvs.log closed on Sat Jan 9 17:35:45 2016