! Started logfile: /scr/pima/rdv73_uvs/J1327+2210_X_uvs.log on Sat Jan 9 17:35:22 2016 obs /scr/pima/rdv73_uvs/J1327+2210_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv73_uvs/J1327+2210_X_uva.fits ! AN table 1: 19 integrations on 3 of 3 possible baselines. ! AN table 2: 2 integrations on 1 of 1 possible baselines. ! AN table 3: 6 integrations on 1 of 1 possible baselines. ! AN table 4: 3 integrations on 6 of 6 possible baselines. ! AN table 5: 3 integrations on 3 of 3 possible baselines. ! AN table 6: 8 integrations on 55 of 55 possible baselines. ! AN table 7: 6 integrations on 66 of 66 possible baselines. ! AN table 8: 4 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.700348 visibilities/baseline/integration-bin. ! Found source: J1327+2210 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3216 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv73_uvs/J1327+2210_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 4:ZC self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 6:ZC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KK self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KK self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 29 telescope corrections were flagged in sub-array 7. ! A total of 16 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 29 telescope corrections were flagged in sub-array 7. ! A total of 16 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 29 telescope corrections were flagged in sub-array 7. ! A total of 16 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 29 telescope corrections were flagged in sub-array 7. ! A total of 16 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.204260Jy sigma=5.282678 ! Fit after self-cal, rms=0.424317Jy sigma=1.863850 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 1:ZC ! Flagging baselines of antenna 1:ZC in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 3:ZC ! Flagging baselines of antenna 3:ZC in the currently selected channels. flag 4:NY ! Flagging baselines of antenna 4:NY in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 4:ZC ! Flagging baselines of antenna 4:ZC in the currently selected channels. flag 5:NY ! Flagging baselines of antenna 5:NY in the currently selected channels. flag 6:NY ! Flagging baselines of antenna 6:NY in the currently selected channels. flag 6:WZ ! Flagging baselines of antenna 6:WZ in the currently selected channels. flag 6:ZC ! Flagging baselines of antenna 6:ZC in the currently selected channels. flag 7:KK ! Flagging baselines of antenna 7:KK in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. flag 8:KK ! Flagging baselines of antenna 8:KK in the currently selected channels. flag 8:NY ! Flagging baselines of antenna 8:NY in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=1.329 mas, bpa=11.71 degrees ! Estimated noise=5.57925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.547337 Jy ! Component: 100 - total flux cleaned = 0.683415 Jy ! Total flux subtracted in 100 components = 0.683415 Jy ! Clean residual min=-0.045476 max=0.091087 Jy/beam ! Clean residual mean=0.000013 rms=0.012083 Jy/beam ! Combined flux in latest and established models = 0.683415 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.683415 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.268921Jy sigma=1.166715 ! Fit after self-cal, rms=0.268246Jy sigma=1.164442 ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=1.338 mas, bpa=12.19 degrees ! Estimated noise=5.58717 mJy/beam. ! Added new window around map position (1, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0919864 Jy ! Component: 100 - total flux cleaned = 0.154667 Jy ! Total flux subtracted in 100 components = 0.154667 Jy ! Clean residual min=-0.045237 max=0.066960 Jy/beam ! Clean residual mean=-0.000004 rms=0.010283 Jy/beam ! Combined flux in latest and established models = 0.838082 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.838082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220528Jy sigma=0.971664 ! Fit after self-cal, rms=0.219685Jy sigma=0.968016 ! Inverting map ! Added new window around map position (1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0566376 Jy ! Component: 100 - total flux cleaned = 0.0788043 Jy ! Total flux subtracted in 100 components = 0.0788043 Jy ! Clean residual min=-0.041536 max=0.051734 Jy/beam ! Clean residual mean=-0.000010 rms=0.009328 Jy/beam ! Combined flux in latest and established models = 0.916886 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.916886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203289Jy sigma=0.883994 ! Fit after self-cal, rms=0.202656Jy sigma=0.879954 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.187 mas, bmaj=1.488 mas, bpa=15.25 degrees ! Estimated noise=4.80926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024973 Jy ! Component: 100 - total flux cleaned = 0.0273259 Jy ! Component: 150 - total flux cleaned = 0.0273407 Jy ! Component: 200 - total flux cleaned = 0.0273325 Jy ! Total flux subtracted in 200 components = 0.0273325 Jy ! Clean residual min=-0.033070 max=0.040224 Jy/beam ! Clean residual mean=-0.000007 rms=0.007226 Jy/beam ! Combined flux in latest and established models = 0.944218 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.944218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189454Jy sigma=0.814578 ! Fit after self-cal, rms=0.189177Jy sigma=0.812818 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NY 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.90 FD 0.90 HN 1.55 KP 0.99 ! LA 1.06 NY 1.00* OV 0.96 PT 0.97 ! SC 0.95 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.92 FD 0.88 HN 1.51 KK 1.00* ! KP 0.94 LA 1.03 MK 0.67 NY 1.00* ! OV 0.97 PT 0.93 SC 0.93 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.83 FD 0.91 HN 1.98 KK 1.00* ! KP 0.94 LA 1.08 MK 0.90 NY 1.00* ! OV 0.95 PT 0.93 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NY 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.85 FD 0.91 HN 1.59 KP 0.94 ! LA 1.04 NY 1.00* OV 0.98 PT 1.02 ! SC 0.96 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.93 FD 0.92 HN 1.72 KK 1.00* ! KP 0.89 LA 1.03 MK 0.65 NY 1.00* ! OV 0.93 PT 0.99 SC 0.95 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.84 FD 0.94 HN 2.01 KK 1.00* ! KP 0.91 LA 1.07 MK 0.94 NY 1.00* ! OV 0.91 PT 0.98 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NY 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.91 FD 0.94 HN 1.56 KP 0.84 ! LA 1.15 NY 1.00* OV 1.01 PT 1.03 ! SC 1.00 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 0.89 HN 1.67 KK 1.00* ! KP 0.85 LA 1.13 MK 0.69 NY 1.00* ! OV 0.95 PT 1.02 SC 1.00 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.89 FD 0.93 HN 1.89 KK 1.00* ! KP 0.84 LA 1.16 MK 0.95 NY 1.00* ! OV 0.95 PT 1.00 SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NY 0.00* WZ 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NY 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.87 FD 0.98 HN 1.60 KP 0.91 ! LA 1.14 NY 1.00* OV 1.00 PT 1.01 ! SC 1.03 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.89 FD 0.88 HN 1.76 KK 1.00* ! KP 0.89 LA 1.11 MK 0.71 NY 1.00* ! OV 0.97 PT 1.01 SC 1.00 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.84 FD 0.95 HN 2.09 KK 1.00* ! KP 0.90 LA 1.16 MK 1.01 NY 1.00* ! OV 0.93 PT 0.97 SC 0.96 ! ! ! Fit before self-cal, rms=0.189177Jy sigma=0.812818 ! Fit after self-cal, rms=0.118270Jy sigma=0.459031 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.175 mas, bmaj=1.513 mas, bpa=17.12 degrees ! Estimated noise=4.8953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0249201 Jy ! Component: 100 - total flux cleaned = -0.0315685 Jy ! Component: 150 - total flux cleaned = -0.0331221 Jy ! Component: 200 - total flux cleaned = -0.0335771 Jy ! Total flux subtracted in 200 components = -0.0335771 Jy ! Clean residual min=-0.013322 max=0.012500 Jy/beam ! Clean residual mean=-0.000006 rms=0.003103 Jy/beam ! Combined flux in latest and established models = 0.910641 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.910641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111559Jy sigma=0.424233 ! Fit after self-cal, rms=0.111562Jy sigma=0.422465 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111562Jy sigma=0.422465 ! Fit after self-cal, rms=0.112571Jy sigma=0.418384 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.178 mas, bmaj=1.516 mas, bpa=17.45 degrees ! Estimated noise=4.8998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0148066 Jy ! Component: 100 - total flux cleaned = -0.0160554 Jy ! Component: 150 - total flux cleaned = -0.0157274 Jy ! Component: 200 - total flux cleaned = -0.0157507 Jy ! Total flux subtracted in 200 components = -0.0157507 Jy ! Clean residual min=-0.012589 max=0.011296 Jy/beam ! Clean residual mean=-0.000007 rms=0.002761 Jy/beam ! Combined flux in latest and established models = 0.894891 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 77 components and 0.894891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109775Jy sigma=0.401048 ! Fit after self-cal, rms=0.109691Jy sigma=0.400477 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216361 Jy ! Component: 100 - total flux cleaned = 0.000491482 Jy ! Component: 150 - total flux cleaned = 0.000753522 Jy ! Component: 200 - total flux cleaned = 0.000989252 Jy ! Total flux subtracted in 200 components = 0.000989252 Jy ! Clean residual min=-0.012371 max=0.011014 Jy/beam ! Clean residual mean=-0.000007 rms=0.002641 Jy/beam ! Combined flux in latest and established models = 0.89588 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.89588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108659Jy sigma=0.393619 ! Fit after self-cal, rms=0.108616Jy sigma=0.393440 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108616Jy sigma=0.393440 ! Fit after self-cal, rms=0.108365Jy sigma=0.382979 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.181 mas, bmaj=1.516 mas, bpa=17.82 degrees ! Estimated noise=4.90604 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00879295 Jy ! Component: 100 - total flux cleaned = -0.00938336 Jy ! Component: 150 - total flux cleaned = -0.00938738 Jy ! Component: 200 - total flux cleaned = -0.00918725 Jy ! Total flux subtracted in 200 components = -0.00918725 Jy ! Clean residual min=-0.010598 max=0.009287 Jy/beam ! Clean residual mean=-0.000002 rms=0.002350 Jy/beam ! Combined flux in latest and established models = 0.886693 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.886692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107168Jy sigma=0.374875 ! Fit after self-cal, rms=0.107142Jy sigma=0.374691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.85929e-05 Jy ! Component: 100 - total flux cleaned = 0.000121799 Jy ! Component: 150 - total flux cleaned = 0.000299097 Jy ! Component: 200 - total flux cleaned = 0.000621049 Jy ! Total flux subtracted in 200 components = 0.000621049 Jy ! Clean residual min=-0.010414 max=0.008932 Jy/beam ! Clean residual mean=-0.000002 rms=0.002288 Jy/beam ! Combined flux in latest and established models = 0.887313 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 0.887314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106698Jy sigma=0.371463 ! Fit after self-cal, rms=0.106680Jy sigma=0.371385 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106680Jy sigma=0.371385 ! Fit after self-cal, rms=0.107503Jy sigma=0.369670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=2.679 mas, bpa=19.08 degrees ! Estimated noise=6.10874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00512886 Jy ! Component: 100 - total flux cleaned = -0.0054696 Jy ! Component: 150 - total flux cleaned = -0.00534465 Jy ! Component: 200 - total flux cleaned = -0.00511889 Jy ! Total flux subtracted in 200 components = -0.00511889 Jy ! Clean residual min=-0.009574 max=0.009902 Jy/beam ! Clean residual mean=-0.000003 rms=0.002569 Jy/beam ! Combined flux in latest and established models = 0.882195 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 0.882195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107043Jy sigma=0.366401 ! Fit after self-cal, rms=0.107030Jy sigma=0.366295 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360017 Jy ! Component: 100 - total flux cleaned = 0.000667175 Jy ! Component: 150 - total flux cleaned = 0.000951962 Jy ! Component: 200 - total flux cleaned = 0.00121987 Jy ! Total flux subtracted in 200 components = 0.00121987 Jy ! Clean residual min=-0.009332 max=0.009869 Jy/beam ! Clean residual mean=-0.000003 rms=0.002527 Jy/beam ! Combined flux in latest and established models = 0.883415 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 0.883415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106929Jy sigma=0.365052 ! Fit after self-cal, rms=0.106921Jy sigma=0.365010 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 6:BR,true ! 6:BR self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:MK,true ! 7:MK self-cal status=fixed weight=1 selfant 7:OV,true ! 7:OV self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:HN,true ! 8:HN self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:MK,true ! 8:MK self-cal status=fixed weight=1 selfant 8:OV,true ! 8:OV self-cal status=fixed weight=1 selfant 8:PT,true ! 8:PT self-cal status=fixed weight=1 selfant 8:SC,true ! 8:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.242436Jy sigma=1.128391 ! Fit after self-cal, rms=0.186739Jy sigma=0.594028 selfant "",false ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 4:ZC self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 6:ZC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KK self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KK self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.186739Jy sigma=0.594028 ! Fit after self-cal, rms=0.146653Jy sigma=0.443255 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.5727 mas, bmaj=1.106 mas, bpa=-9.808 degrees ! Estimated noise=4.89777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00387124 Jy ! Component: 100 - total flux cleaned = -0.00453418 Jy ! Component: 150 - total flux cleaned = -0.00394231 Jy ! Component: 200 - total flux cleaned = -0.00193909 Jy ! Total flux subtracted in 200 components = -0.00193909 Jy ! Clean residual min=-0.013776 max=0.011490 Jy/beam ! Clean residual mean=-0.000001 rms=0.002541 Jy/beam ! Combined flux in latest and established models = 0.881475 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 0.881475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141160Jy sigma=0.422727 ! Fit after self-cal, rms=0.139982Jy sigma=0.419365 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.6526 mas, bmaj=1.239 mas, bpa=-11.21 degrees ! Estimated noise=4.0232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, 32.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003789 Jy ! Component: 100 - total flux cleaned = 0.00411487 Jy ! Component: 150 - total flux cleaned = 0.00442771 Jy ! Component: 200 - total flux cleaned = 0.00530468 Jy ! Component: 250 - total flux cleaned = 0.00584751 Jy ! Component: 300 - total flux cleaned = 0.00635759 Jy ! Component: 350 - total flux cleaned = 0.00635163 Jy ! Component: 400 - total flux cleaned = 0.00682547 Jy ! Total flux subtracted in 400 components = 0.00682547 Jy ! Clean residual min=-0.008514 max=0.009303 Jy/beam ! Clean residual mean=-0.000002 rms=0.002102 Jy/beam ! Combined flux in latest and established models = 0.888301 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 150 components and 0.888301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137274Jy sigma=0.409312 ! Fit after self-cal, rms=0.137199Jy sigma=0.408912 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Added new window around map position (-10.6, 13.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00800572 Jy ! Component: 100 - total flux cleaned = 0.00932446 Jy ! Component: 150 - total flux cleaned = 0.00980589 Jy ! Component: 200 - total flux cleaned = 0.0104714 Jy ! Component: 250 - total flux cleaned = 0.0108916 Jy ! Component: 300 - total flux cleaned = 0.0113024 Jy ! Component: 350 - total flux cleaned = 0.0118954 Jy ! Component: 400 - total flux cleaned = 0.0122758 Jy ! Total flux subtracted in 400 components = 0.0122758 Jy ! Clean residual min=-0.008909 max=0.008137 Jy/beam ! Clean residual mean=-0.000000 rms=0.001992 Jy/beam ! Combined flux in latest and established models = 0.900577 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 180 components and 0.900577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135391Jy sigma=0.402799 ! Fit after self-cal, rms=0.135323Jy sigma=0.402559 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018626 Jy ! Component: 100 - total flux cleaned = 0.00223014 Jy ! Component: 150 - total flux cleaned = 0.00258757 Jy ! Component: 200 - total flux cleaned = 0.00293259 Jy ! Component: 250 - total flux cleaned = 0.00326436 Jy ! Component: 300 - total flux cleaned = 0.00326278 Jy ! Component: 350 - total flux cleaned = 0.00342334 Jy ! Component: 400 - total flux cleaned = 0.00373676 Jy ! Total flux subtracted in 400 components = 0.00373676 Jy ! Clean residual min=-0.008777 max=0.007918 Jy/beam ! Clean residual mean=0.000000 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 0.904314 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 202 components and 0.904314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134366Jy sigma=0.399459 ! Fit after self-cal, rms=0.134338Jy sigma=0.399397 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 32 telescope corrections were flagged in sub-array 7. ! A total of 22 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 32 telescope corrections were flagged in sub-array 7. ! A total of 22 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 32 telescope corrections were flagged in sub-array 7. ! A total of 22 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 32 telescope corrections were flagged in sub-array 7. ! A total of 22 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.230323Jy sigma=1.033585 ! Fit after self-cal, rms=0.134530Jy sigma=0.394270 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.6505 mas, bmaj=1.237 mas, bpa=-11.19 degrees ! Estimated noise=4.0367 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00676297 Jy ! Component: 100 - total flux cleaned = -0.0078288 Jy ! Component: 150 - total flux cleaned = -0.00829024 Jy ! Component: 200 - total flux cleaned = -0.00848741 Jy ! Component: 250 - total flux cleaned = -0.00867591 Jy ! Component: 300 - total flux cleaned = -0.00868591 Jy ! Component: 350 - total flux cleaned = -0.00885657 Jy ! Component: 400 - total flux cleaned = -0.00901843 Jy ! Total flux subtracted in 400 components = -0.00901843 Jy ! Clean residual min=-0.007593 max=0.007437 Jy/beam ! Clean residual mean=0.000002 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.895295 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 213 components and 0.895295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133019Jy sigma=0.388318 ! Fit after self-cal, rms=0.132991Jy sigma=0.388219 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.43293e-06 Jy ! Component: 100 - total flux cleaned = 0.0001383 Jy ! Component: 150 - total flux cleaned = 0.00028199 Jy ! Component: 200 - total flux cleaned = 0.000557693 Jy ! Component: 250 - total flux cleaned = 0.00069191 Jy ! Component: 300 - total flux cleaned = 0.000821243 Jy ! Component: 350 - total flux cleaned = 0.00094806 Jy ! Component: 400 - total flux cleaned = 0.00107162 Jy ! Total flux subtracted in 400 components = 0.00107162 Jy ! Clean residual min=-0.007406 max=0.007356 Jy/beam ! Clean residual mean=0.000003 rms=0.001747 Jy/beam ! Combined flux in latest and established models = 0.896367 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 224 components and 0.896367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132325Jy sigma=0.385967 ! Fit after self-cal, rms=0.132315Jy sigma=0.385933 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132315Jy sigma=0.385933 ! Fit after self-cal, rms=0.132428Jy sigma=0.381442 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.6494 mas, bmaj=1.236 mas, bpa=-11.12 degrees ! Estimated noise=4.04507 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00466608 Jy ! Component: 100 - total flux cleaned = -0.00605282 Jy ! Component: 150 - total flux cleaned = -0.00657827 Jy ! Component: 200 - total flux cleaned = -0.00720731 Jy ! Component: 250 - total flux cleaned = -0.00706543 Jy ! Component: 300 - total flux cleaned = -0.00720182 Jy ! Component: 350 - total flux cleaned = -0.00746027 Jy ! Component: 400 - total flux cleaned = -0.0074622 Jy ! Total flux subtracted in 400 components = -0.0074622 Jy ! Clean residual min=-0.006930 max=0.007188 Jy/beam ! Clean residual mean=0.000003 rms=0.001644 Jy/beam ! Combined flux in latest and established models = 0.888905 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 239 components and 0.888905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131574Jy sigma=0.378033 ! Fit after self-cal, rms=0.131568Jy sigma=0.377986 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.8, -20.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452161 Jy ! Component: 100 - total flux cleaned = 0.00500641 Jy ! Component: 150 - total flux cleaned = 0.00570693 Jy ! Component: 200 - total flux cleaned = 0.00610187 Jy ! Component: 250 - total flux cleaned = 0.00659412 Jy ! Component: 300 - total flux cleaned = 0.00682794 Jy ! Component: 350 - total flux cleaned = 0.00671457 Jy ! Component: 400 - total flux cleaned = 0.00693821 Jy ! Total flux subtracted in 400 components = 0.00693821 Jy ! Clean residual min=-0.006972 max=0.007271 Jy/beam ! Clean residual mean=0.000003 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.895843 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 272 components and 0.895843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130710Jy sigma=0.375690 ! Fit after self-cal, rms=0.130716Jy sigma=0.375595 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Added new window around map position (-39.8, -19.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0061604 Jy ! Component: 100 - total flux cleaned = 0.00787524 Jy ! Component: 150 - total flux cleaned = 0.00860434 Jy ! Component: 200 - total flux cleaned = 0.009405 Jy ! Component: 250 - total flux cleaned = 0.0102937 Jy ! Component: 300 - total flux cleaned = 0.0113795 Jy ! Component: 350 - total flux cleaned = 0.0125305 Jy ! Component: 400 - total flux cleaned = 0.0130895 Jy ! Total flux subtracted in 400 components = 0.0130895 Jy ! Clean residual min=-0.007142 max=0.006353 Jy/beam ! Clean residual mean=0.000005 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 0.908932 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 305 components and 0.908932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129904Jy sigma=0.373047 ! Fit after self-cal, rms=0.129902Jy sigma=0.372863 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129902Jy sigma=0.372863 ! Fit after self-cal, rms=0.130064Jy sigma=0.370416 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=2.336 mas, bmaj=2.627 mas, bpa=23.05 degrees ! Estimated noise=5.83912 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00267345 Jy ! Component: 100 - total flux cleaned = -0.00222722 Jy ! Component: 150 - total flux cleaned = -0.00191849 Jy ! Component: 200 - total flux cleaned = -0.00162952 Jy ! Component: 250 - total flux cleaned = -0.00145239 Jy ! Component: 300 - total flux cleaned = -0.00119537 Jy ! Component: 350 - total flux cleaned = -0.00103007 Jy ! Component: 400 - total flux cleaned = -0.000869089 Jy ! Total flux subtracted in 400 components = -0.000869089 Jy ! Clean residual min=-0.009067 max=0.008760 Jy/beam ! Clean residual mean=0.000015 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 0.908063 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 326 components and 0.908063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129878Jy sigma=0.370120 ! Fit after self-cal, rms=0.129870Jy sigma=0.370026 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.71301e-05 Jy ! Component: 100 - total flux cleaned = 0.000453556 Jy ! Component: 150 - total flux cleaned = 0.000681371 Jy ! Component: 200 - total flux cleaned = 0.000902918 Jy ! Component: 250 - total flux cleaned = 0.00118818 Jy ! Component: 300 - total flux cleaned = 0.00132777 Jy ! Component: 350 - total flux cleaned = 0.00139753 Jy ! Component: 400 - total flux cleaned = 0.00159633 Jy ! Total flux subtracted in 400 components = 0.00159633 Jy ! Clean residual min=-0.008912 max=0.008734 Jy/beam ! Clean residual mean=0.000014 rms=0.002085 Jy/beam ! Combined flux in latest and established models = 0.909659 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 336 components and 0.909659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129821Jy sigma=0.370114 ! Fit after self-cal, rms=0.129821Jy sigma=0.370077 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.649 mas, bmaj=1.236 mas, bpa=-11.11 degrees ! Estimated noise=4.05054 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.649 x 1.236 at -11.11 degrees (North through East) ! Clean map min=-0.0092824 max=0.66681 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129821Jy sigma=0.370077 ! Fit after self-cal, rms=0.129062Jy sigma=0.342727 ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.6496 mas, bmaj=1.237 mas, bpa=-11.12 degrees ! Estimated noise=4.0642 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122204 Jy ! Component: 100 - total flux cleaned = 0.00165361 Jy ! Component: 150 - total flux cleaned = 0.00179513 Jy ! Component: 200 - total flux cleaned = 0.0021929 Jy ! Component: 250 - total flux cleaned = 0.00244255 Jy ! Component: 300 - total flux cleaned = 0.00244142 Jy ! Component: 350 - total flux cleaned = 0.00244042 Jy ! Component: 400 - total flux cleaned = 0.0024404 Jy ! Total flux subtracted in 400 components = 0.0024404 Jy ! Clean residual min=-0.006424 max=0.006053 Jy/beam ! Clean residual mean=0.000005 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.9121 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 350 components and 0.9121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128437Jy sigma=0.340523 ! Fit after self-cal, rms=0.128424Jy sigma=0.340468 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348668 Jy ! Component: 100 - total flux cleaned = 0.000566606 Jy ! Component: 150 - total flux cleaned = 0.000777282 Jy ! Component: 200 - total flux cleaned = 0.000775568 Jy ! Component: 250 - total flux cleaned = 0.00077599 Jy ! Component: 300 - total flux cleaned = 0.000873679 Jy ! Component: 350 - total flux cleaned = 0.000873101 Jy ! Component: 400 - total flux cleaned = 0.000968162 Jy ! Total flux subtracted in 400 components = 0.000968162 Jy ! Clean residual min=-0.006421 max=0.006010 Jy/beam ! Clean residual mean=0.000005 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.913068 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 364 components and 0.913068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128029Jy sigma=0.339288 ! Fit after self-cal, rms=0.128037Jy sigma=0.339266 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128037Jy sigma=0.339266 ! Fit after self-cal, rms=0.128781Jy sigma=0.338937 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.5691 mas, bmaj=1.103 mas, bpa=-9.729 degrees ! Estimated noise=4.95729 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.545773 Jy ! Component: 100 - total flux cleaned = 0.671255 Jy ! Component: 150 - total flux cleaned = 0.721317 Jy ! Component: 200 - total flux cleaned = 0.750267 Jy ! Component: 250 - total flux cleaned = 0.771702 Jy ! Component: 300 - total flux cleaned = 0.78898 Jy ! Component: 350 - total flux cleaned = 0.8033 Jy ! Component: 400 - total flux cleaned = 0.815479 Jy ! Total flux subtracted in 400 components = 0.815479 Jy ! Clean residual min=-0.009762 max=0.009966 Jy/beam ! Clean residual mean=0.000003 rms=0.002170 Jy/beam ! Combined flux in latest and established models = 0.815479 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.815479 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.6489 mas, bmaj=1.238 mas, bpa=-11.1 degrees ! Estimated noise=4.06846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157071 Jy ! Component: 100 - total flux cleaned = 0.0267066 Jy ! Component: 150 - total flux cleaned = 0.0358473 Jy ! Component: 200 - total flux cleaned = 0.0438017 Jy ! Component: 250 - total flux cleaned = 0.0508194 Jy ! Component: 300 - total flux cleaned = 0.0571709 Jy ! Component: 350 - total flux cleaned = 0.0623037 Jy ! Component: 400 - total flux cleaned = 0.0653474 Jy ! Total flux subtracted in 400 components = 0.0653474 Jy ! Clean residual min=-0.007309 max=0.007327 Jy/beam ! Clean residual mean=0.000005 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.880826 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 89 components and 0.880826 Jy ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=2.345 mas, bmaj=2.627 mas, bpa=23.32 degrees ! Estimated noise=5.84622 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804988 Jy ! Component: 100 - total flux cleaned = 0.0118502 Jy ! Component: 150 - total flux cleaned = 0.0145828 Jy ! Component: 200 - total flux cleaned = 0.0169672 Jy ! Component: 250 - total flux cleaned = 0.0186845 Jy ! Component: 300 - total flux cleaned = 0.0198944 Jy ! Component: 350 - total flux cleaned = 0.0209112 Jy ! Component: 400 - total flux cleaned = 0.0215498 Jy ! Total flux subtracted in 400 components = 0.0215498 Jy ! Clean residual min=-0.007616 max=0.007950 Jy/beam ! Clean residual mean=0.000013 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.902376 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-42.6, -29.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00542497 Jy ! Component: 100 - total flux cleaned = 0.00720208 Jy ! Component: 150 - total flux cleaned = 0.00873676 Jy ! Component: 200 - total flux cleaned = 0.0104078 Jy ! Component: 250 - total flux cleaned = 0.0116601 Jy ! Component: 300 - total flux cleaned = 0.0125646 Jy ! Component: 350 - total flux cleaned = 0.0136595 Jy ! Component: 400 - total flux cleaned = 0.0144737 Jy ! Total flux subtracted in 400 components = 0.0144737 Jy ! Clean residual min=-0.007072 max=0.006069 Jy/beam ! Clean residual mean=0.000007 rms=0.001712 Jy/beam ! Combined flux in latest and established models = 0.91685 Jy ! Adding 117 model components to the UV plane model. ! The established model now contains 202 components and 0.916849 Jy ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.6489 mas, bmaj=1.238 mas, bpa=-11.1 degrees ! Estimated noise=4.06846 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00256757 Jy ! Component: 100 - total flux cleaned = -0.00320134 Jy ! Component: 150 - total flux cleaned = -0.00340328 Jy ! Component: 200 - total flux cleaned = -0.00284325 Jy ! Component: 250 - total flux cleaned = -0.00229964 Jy ! Component: 300 - total flux cleaned = -0.00177044 Jy ! Component: 350 - total flux cleaned = -0.000920712 Jy ! Component: 400 - total flux cleaned = -0.00058854 Jy ! Total flux subtracted in 400 components = -0.00058854 Jy ! Clean residual min=-0.006178 max=0.006771 Jy/beam ! Clean residual mean=0.000003 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.916261 Jy selfcal ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 252 components and 0.916261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130411Jy sigma=0.343548 ! Fit after self-cal, rms=0.130308Jy sigma=0.342420 wmodel /scr/pima/rdv73_uvs/J1327+2210_X_map.mod ! Writing 252 model components to file: /scr/pima/rdv73_uvs/J1327+2210_X_map.mod wobs /scr/pima/rdv73_uvs/J1327+2210_X_uvs.fits ! Applying 2431 buffered edits. ! Writing UV FITS file: /scr/pima/rdv73_uvs/J1327+2210_X_uvs.fits wwins /scr/pima/rdv73_uvs/J1327+2210_X_map.win ! wwins: Wrote 9 windows to /scr/pima/rdv73_uvs/J1327+2210_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176188 Jy ! Component: 100 - total flux cleaned = 0.000749719 Jy ! Component: 150 - total flux cleaned = 0.000318073 Jy ! Component: 200 - total flux cleaned = -0.000207028 Jy ! Component: 250 - total flux cleaned = -0.000720184 Jy ! Component: 300 - total flux cleaned = -0.00122494 Jy ! Component: 350 - total flux cleaned = -0.00152204 Jy ! Component: 400 - total flux cleaned = -0.00162012 Jy ! Component: 450 - total flux cleaned = -0.00181346 Jy ! Component: 500 - total flux cleaned = -0.00181361 Jy ! Component: 550 - total flux cleaned = -0.0020954 Jy ! Component: 600 - total flux cleaned = -0.00200346 Jy ! Component: 650 - total flux cleaned = -0.00209596 Jy ! Component: 700 - total flux cleaned = -0.00218744 Jy ! Component: 750 - total flux cleaned = -0.0022772 Jy ! Component: 800 - total flux cleaned = -0.00209981 Jy ! Component: 850 - total flux cleaned = -0.00236574 Jy ! Component: 900 - total flux cleaned = -0.00227799 Jy ! Component: 950 - total flux cleaned = -0.00227772 Jy ! Component: 1000 - total flux cleaned = -0.0021904 Jy ! Component: 1050 - total flux cleaned = -0.00227618 Jy ! Component: 1100 - total flux cleaned = -0.00244614 Jy ! Component: 1150 - total flux cleaned = -0.00219228 Jy ! Component: 1200 - total flux cleaned = -0.00227622 Jy ! Component: 1250 - total flux cleaned = -0.00202649 Jy ! Component: 1300 - total flux cleaned = -0.00219287 Jy ! Component: 1350 - total flux cleaned = -0.0022749 Jy ! Component: 1400 - total flux cleaned = -0.00186675 Jy ! Component: 1450 - total flux cleaned = -0.00178593 Jy ! Component: 1500 - total flux cleaned = -0.00210891 Jy ! Component: 1550 - total flux cleaned = -0.00170749 Jy ! Component: 1600 - total flux cleaned = -0.0017074 Jy ! Component: 1650 - total flux cleaned = -0.00194478 Jy ! Component: 1700 - total flux cleaned = -0.00178784 Jy ! Component: 1750 - total flux cleaned = -0.00163178 Jy ! Component: 1800 - total flux cleaned = -0.00171047 Jy ! Component: 1850 - total flux cleaned = -0.00178786 Jy ! Component: 1900 - total flux cleaned = -0.00186474 Jy ! Component: 1950 - total flux cleaned = -0.0020172 Jy ! Component: 2000 - total flux cleaned = -0.00163714 Jy ! Component: 2050 - total flux cleaned = -0.0018641 Jy ! Component: 2100 - total flux cleaned = -0.00163792 Jy ! Component: 2150 - total flux cleaned = -0.0015633 Jy ! Component: 2200 - total flux cleaned = -0.00163659 Jy ! Component: 2250 - total flux cleaned = -0.00171075 Jy ! Component: 2300 - total flux cleaned = -0.00171038 Jy ! Component: 2350 - total flux cleaned = -0.00127108 Jy ! Component: 2400 - total flux cleaned = -0.00148963 Jy ! Component: 2450 - total flux cleaned = -0.00141674 Jy ! Component: 2500 - total flux cleaned = -0.00127261 Jy ! Component: 2550 - total flux cleaned = -0.00127217 Jy ! Component: 2600 - total flux cleaned = -0.00155794 Jy ! Component: 2650 - total flux cleaned = -0.00162888 Jy ! Component: 2700 - total flux cleaned = -0.00155805 Jy ! Component: 2750 - total flux cleaned = -0.00127688 Jy ! Component: 2800 - total flux cleaned = -0.00113645 Jy ! Component: 2850 - total flux cleaned = -0.00106591 Jy ! Component: 2900 - total flux cleaned = -0.000927584 Jy ! Component: 2950 - total flux cleaned = -0.000927682 Jy ! Component: 3000 - total flux cleaned = -0.000789806 Jy ! Component: 3050 - total flux cleaned = -0.000584462 Jy ! Component: 3100 - total flux cleaned = -0.000652545 Jy ! Component: 3150 - total flux cleaned = -0.000176996 Jy ! Component: 3200 - total flux cleaned = -0.00024518 Jy ! Component: 3250 - total flux cleaned = 0.000158793 Jy ! Component: 3300 - total flux cleaned = 0.000426943 Jy ! Component: 3350 - total flux cleaned = 0.000427246 Jy ! Component: 3400 - total flux cleaned = 0.000760019 Jy ! Component: 3450 - total flux cleaned = 0.000892553 Jy ! Component: 3500 - total flux cleaned = 0.000892629 Jy ! Component: 3550 - total flux cleaned = 0.000892525 Jy ! Component: 3600 - total flux cleaned = 0.000892788 Jy ! Component: 3650 - total flux cleaned = 0.00108901 Jy ! Component: 3700 - total flux cleaned = 0.00128403 Jy ! Component: 3750 - total flux cleaned = 0.00167278 Jy ! Component: 3800 - total flux cleaned = 0.0015436 Jy ! Component: 3850 - total flux cleaned = 0.00167194 Jy ! Component: 3900 - total flux cleaned = 0.0019279 Jy ! Component: 3950 - total flux cleaned = 0.00192842 Jy ! Component: 4000 - total flux cleaned = 0.00218244 Jy ! Component: 4050 - total flux cleaned = 0.00262491 Jy ! Total flux subtracted in 4096 components = 0.00237295 Jy ! Clean residual min=-0.003243 max=0.003742 Jy/beam ! Clean residual mean=0.000001 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.918634 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 587 components and 0.918634 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv73_uvs/J1327+2210_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6489 x 1.238 at -11.1 degrees (North through East) ! Clean map min=-0.0048891 max=0.69066 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv73_uvs/J1327+2210_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 5.99% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.6906 rms= 0.00104 Jy quit ! Quitting program ! Log file /scr/pima/rdv73_uvs/J1327+2210_X_uvs.log closed on Sat Jan 9 17:35:28 2016