! Started logfile: /scr/pima/rdv73_uvs/J0854+2006_X_uvs.log on Sat Jan 9 17:32:52 2016 obs /scr/pima/rdv73_uvs/J0854+2006_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv73_uvs/J0854+2006_X_uva.fits ! AN table 1: 9 integrations on 3 of 3 possible baselines. ! AN table 2: 7 integrations on 21 of 21 possible baselines. ! AN table 3: 7 integrations on 36 of 36 possible baselines. ! AN table 4: 3 integrations on 15 of 15 possible baselines. ! AN table 5: 6 integrations on 66 of 66 possible baselines. ! AN table 6: 11 integrations on 55 of 55 possible baselines. ! AN table 7: 2 integrations on 1 of 1 possible baselines. ! AN table 8: 3 integrations on 36 of 36 possible baselines. ! AN table 9: 3 integrations on 6 of 6 possible baselines. ! AN table 10: 3 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.563041 visibilities/baseline/integration-bin. ! Found source: J0854+2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3644 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv73_uvs/J0854+2006_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 2:ZC self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:ZC self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 5:ZC self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KK self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:KK self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 9:KK self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 10:KK self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 10:WZ self-cal status=correctable weight=1 ! 10:ZC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 27 telescope corrections were flagged in sub-array 5. ! A total of 75 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 27 telescope corrections were flagged in sub-array 5. ! A total of 75 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 27 telescope corrections were flagged in sub-array 5. ! A total of 75 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 27 telescope corrections were flagged in sub-array 5. ! A total of 75 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=1.852347Jy sigma=6.342354 ! Fit after self-cal, rms=0.683057Jy sigma=2.280955 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 1:ZC ! Flagging baselines of antenna 1:ZC in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 2:ZC ! Flagging baselines of antenna 2:ZC in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 3:ZC ! Flagging baselines of antenna 3:ZC in the currently selected channels. flag 4:ZC ! Flagging baselines of antenna 4:ZC in the currently selected channels. flag 5:NY ! Flagging baselines of antenna 5:NY in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 5:ZC ! Flagging baselines of antenna 5:ZC in the currently selected channels. flag 6:KK ! Flagging baselines of antenna 6:KK in the currently selected channels. flag 6:NY ! Flagging baselines of antenna 6:NY in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 8:KK ! Flagging baselines of antenna 8:KK in the currently selected channels. flag 8:NY ! Flagging baselines of antenna 8:NY in the currently selected channels. flag 9:KK ! Flagging baselines of antenna 9:KK in the currently selected channels. flag 9:NY ! Flagging baselines of antenna 9:NY in the currently selected channels. flag 10:KK ! Flagging baselines of antenna 10:KK in the currently selected channels. flag 10:NY ! Flagging baselines of antenna 10:NY in the currently selected channels. flag 10:WZ ! Flagging baselines of antenna 10:WZ in the currently selected channels. flag 10:ZC ! Flagging baselines of antenna 10:ZC in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=1.363 mas, bpa=-8.164 degrees ! Estimated noise=6.92093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12161 Jy ! Component: 100 - total flux cleaned = 1.38137 Jy ! Total flux subtracted in 100 components = 1.38137 Jy ! Clean residual min=-0.096856 max=0.193147 Jy/beam ! Clean residual mean=0.000239 rms=0.027257 Jy/beam ! Combined flux in latest and established models = 1.38137 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.38137 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=0.606380Jy sigma=2.217708 ! Fit after self-cal, rms=0.603387Jy sigma=2.186658 ! Inverting map and beam ! Estimated beam: bmin=1.078 mas, bmaj=1.368 mas, bpa=-7.149 degrees ! Estimated noise=6.98331 mJy/beam. ! Added new window around map position (-1.4, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167766 Jy ! Component: 100 - total flux cleaned = 0.213432 Jy ! Total flux subtracted in 100 components = 0.213432 Jy ! Clean residual min=-0.107377 max=0.176732 Jy/beam ! Clean residual mean=0.000206 rms=0.025256 Jy/beam ! Combined flux in latest and established models = 1.5948 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 1.5948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.529583Jy sigma=1.936136 ! Fit after self-cal, rms=0.522361Jy sigma=1.915296 ! Inverting map ! Added new window around map position (1.8, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143827 Jy ! Component: 100 - total flux cleaned = 0.177156 Jy ! Total flux subtracted in 100 components = 0.177156 Jy ! Clean residual min=-0.095404 max=0.118582 Jy/beam ! Clean residual mean=0.000170 rms=0.022940 Jy/beam ! Combined flux in latest and established models = 1.77195 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 1.77195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.478223Jy sigma=1.725875 ! Fit after self-cal, rms=0.476070Jy sigma=1.715710 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.299 mas, bmaj=1.58 mas, bpa=-6.28 degrees ! Estimated noise=5.78597 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109817 Jy ! Component: 100 - total flux cleaned = 0.178301 Jy ! Component: 150 - total flux cleaned = 0.198263 Jy ! Component: 200 - total flux cleaned = 0.205017 Jy ! Total flux subtracted in 200 components = 0.205017 Jy ! Clean residual min=-0.113052 max=0.109374 Jy/beam ! Clean residual mean=0.000316 rms=0.023711 Jy/beam ! Combined flux in latest and established models = 1.97697 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 1.97697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441847Jy sigma=1.611008 ! Fit after self-cal, rms=0.440642Jy sigma=1.604227 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 2.25 LA 1.10 NL 1.29 NY 1.00* ! SC 0.76 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.91 HN 1.70 LA 1.07 NL 1.29 ! NY 1.00* PT 0.96 SC 0.83 WZ 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.90 HN 1.88 LA 0.97 NL 1.33 ! SC 0.89 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.87 FD 0.89 HN 1.73 KP 0.93 ! LA 1.04 NL 1.13 NY 1.00* OV 0.94 ! PT 0.95 SC 0.91 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 FD 0.83 HN 1.65 KK 1.00* ! KP 1.08 LA 1.03 MK 1.01 NY 1.00* ! OV 0.83 PT 0.85 SC 0.92 ! ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.73 FD 0.86 KK 1.00* KP 0.92 ! LA 1.03 MK 0.86 NY 1.00* OV 0.86 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 9: ! KK 0.00* MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! KK 0.00* NY 0.00* WZ 0.00* ZC 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 2.23 LA 1.05 NL 1.27 NY 1.00* ! SC 0.79 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 HN 1.56 LA 1.08 NL 1.20 ! NY 1.00* PT 1.04 SC 0.81 WZ 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 HN 2.03 LA 0.99 NL 1.26 ! SC 0.89 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.88 FD 0.90 HN 1.69 KP 0.87 ! LA 1.03 NL 1.12 NY 1.00* OV 0.90 ! PT 1.00 SC 0.96 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 0.80 HN 1.73 KK 1.00* ! KP 1.08 LA 1.02 MK 1.05 NY 1.00* ! OV 0.82 PT 0.92 SC 0.89 ! ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.74 FD 0.87 KK 1.00* KP 0.87 ! LA 1.02 MK 0.86 NY 1.00* OV 0.83 ! PT 1.01 ! ! Telescope amplitude corrections in sub-array 9: ! KK 0.00* MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! KK 0.00* NY 0.00* WZ 0.00* ZC 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 2.08 LA 1.12 NL 1.33 NY 1.00* ! SC 0.74 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 HN 1.83 LA 1.06 NL 1.22 ! NY 1.00* PT 1.03 SC 0.83 WZ 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 HN 1.86 LA 1.01 NL 1.32 ! SC 0.92 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.92 FD 0.90 HN 1.60 KP 0.80 ! LA 1.07 NL 1.09 NY 1.00* OV 0.94 ! PT 0.98 SC 0.96 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.78 HN 1.68 KK 1.00* ! KP 0.96 LA 1.05 MK 1.04 NY 1.00* ! OV 0.81 PT 0.91 SC 0.93 ! ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.77 FD 0.87 KK 1.00* KP 0.80 ! LA 1.07 MK 0.89 NY 1.00* OV 0.88 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 9: ! KK 0.00* MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! KK 0.00* NY 0.00* WZ 0.00* ZC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 2.24 LA 1.13 NL 1.28 NY 1.00* ! SC 0.79 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 HN 1.79 LA 1.11 NL 1.26 ! NY 1.00* PT 1.00 SC 0.86 WZ 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 HN 2.09 LA 1.00 NL 1.27 ! SC 0.95 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.88 FD 0.90 HN 1.73 KP 0.84 ! LA 1.08 NL 1.07 NY 1.00* OV 0.93 ! PT 0.98 SC 0.98 WZ 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.89 FD 0.85 HN 1.88 KK 1.00* ! KP 1.01 LA 1.01 MK 1.07 NY 1.00* ! OV 0.79 PT 0.92 SC 0.91 ! ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.76 FD 0.88 KK 1.00* KP 0.85 ! LA 1.02 MK 0.95 NY 1.00* OV 0.89 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 9: ! KK 0.00* MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! KK 0.00* NY 0.00* WZ 0.00* ZC 0.00* ! ! ! Fit before self-cal, rms=0.440642Jy sigma=1.604227 ! Fit after self-cal, rms=0.192872Jy sigma=0.558414 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.304 mas, bmaj=1.536 mas, bpa=0.4517 degrees ! Estimated noise=5.88925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0363461 Jy ! Component: 100 - total flux cleaned = -0.0420308 Jy ! Component: 150 - total flux cleaned = -0.0448521 Jy ! Component: 200 - total flux cleaned = -0.047289 Jy ! Total flux subtracted in 200 components = -0.047289 Jy ! Clean residual min=-0.027040 max=0.023117 Jy/beam ! Clean residual mean=0.000010 rms=0.005363 Jy/beam ! Combined flux in latest and established models = 1.92968 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 1.92968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179867Jy sigma=0.509880 ! Fit after self-cal, rms=0.179076Jy sigma=0.504941 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179076Jy sigma=0.504941 ! Fit after self-cal, rms=0.176645Jy sigma=0.495803 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.304 mas, bmaj=1.536 mas, bpa=0.6415 degrees ! Estimated noise=5.87822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0284419 Jy ! Component: 100 - total flux cleaned = -0.0317825 Jy ! Component: 150 - total flux cleaned = -0.0339284 Jy ! Component: 200 - total flux cleaned = -0.0358053 Jy ! Total flux subtracted in 200 components = -0.0358053 Jy ! Clean residual min=-0.022598 max=0.020175 Jy/beam ! Clean residual mean=0.000014 rms=0.004614 Jy/beam ! Combined flux in latest and established models = 1.89388 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 1.89388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168414Jy sigma=0.465362 ! Fit after self-cal, rms=0.167376Jy sigma=0.462850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00383203 Jy ! Component: 100 - total flux cleaned = -0.00550648 Jy ! Component: 150 - total flux cleaned = -0.00694673 Jy ! Component: 200 - total flux cleaned = -0.00823096 Jy ! Total flux subtracted in 200 components = -0.00823096 Jy ! Clean residual min=-0.020588 max=0.019479 Jy/beam ! Clean residual mean=0.000021 rms=0.004412 Jy/beam ! Combined flux in latest and established models = 1.88565 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 1.88565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164111Jy sigma=0.450574 ! Fit after self-cal, rms=0.163466Jy sigma=0.449105 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163466Jy sigma=0.449105 ! Fit after self-cal, rms=0.160780Jy sigma=0.438425 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.303 mas, bmaj=1.535 mas, bpa=0.9007 degrees ! Estimated noise=5.87785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0202418 Jy ! Component: 100 - total flux cleaned = -0.023193 Jy ! Component: 150 - total flux cleaned = -0.0246913 Jy ! Component: 200 - total flux cleaned = -0.0264482 Jy ! Total flux subtracted in 200 components = -0.0264482 Jy ! Clean residual min=-0.019043 max=0.016771 Jy/beam ! Clean residual mean=0.000016 rms=0.003846 Jy/beam ! Combined flux in latest and established models = 1.8592 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 1.8592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156328Jy sigma=0.422220 ! Fit after self-cal, rms=0.155697Jy sigma=0.420579 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00398264 Jy ! Component: 100 - total flux cleaned = -0.00437828 Jy ! Component: 150 - total flux cleaned = -0.00542033 Jy ! Component: 200 - total flux cleaned = -0.0060608 Jy ! Total flux subtracted in 200 components = -0.0060608 Jy ! Clean residual min=-0.017376 max=0.015677 Jy/beam ! Clean residual mean=0.000021 rms=0.003728 Jy/beam ! Combined flux in latest and established models = 1.85314 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 1.85314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153857Jy sigma=0.413710 ! Fit after self-cal, rms=0.153460Jy sigma=0.412804 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153460Jy sigma=0.412804 ! Fit after self-cal, rms=0.152102Jy sigma=0.406572 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=3.027 mas, bpa=52.98 degrees ! Estimated noise=6.90573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0169277 Jy ! Component: 100 - total flux cleaned = -0.0196336 Jy ! Component: 150 - total flux cleaned = -0.0208108 Jy ! Component: 200 - total flux cleaned = -0.0213028 Jy ! Total flux subtracted in 200 components = -0.0213028 Jy ! Clean residual min=-0.013836 max=0.015867 Jy/beam ! Clean residual mean=0.000035 rms=0.004011 Jy/beam ! Combined flux in latest and established models = 1.83184 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 1.83184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150563Jy sigma=0.400866 ! Fit after self-cal, rms=0.150278Jy sigma=0.399906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118253 Jy ! Component: 100 - total flux cleaned = -0.00162276 Jy ! Component: 150 - total flux cleaned = -0.00181651 Jy ! Component: 200 - total flux cleaned = -0.00198793 Jy ! Total flux subtracted in 200 components = -0.00198793 Jy ! Clean residual min=-0.013376 max=0.015789 Jy/beam ! Clean residual mean=0.000039 rms=0.003979 Jy/beam ! Combined flux in latest and established models = 1.82985 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 80 components and 1.82985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149740Jy sigma=0.397624 ! Fit after self-cal, rms=0.149580Jy sigma=0.397282 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 2:LA,true ! 2:LA self-cal status=fixed weight=1 selfant 2:NL,true ! 2:NL self-cal status=fixed weight=1 selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:FD,true ! 3:FD self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:LA,true ! 3:LA self-cal status=fixed weight=1 selfant 3:NL,true ! 3:NL self-cal status=fixed weight=1 selfant 3:PT,true ! 3:PT self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 4:BR,true ! 4:BR self-cal status=fixed weight=1 selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 4:LA,true ! 4:LA self-cal status=fixed weight=1 selfant 4:NL,true ! 4:NL self-cal status=fixed weight=1 selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 5:BR,true ! 5:BR self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:KP,true ! 5:KP self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:NL,true ! 5:NL self-cal status=fixed weight=1 selfant 5:OV,true ! 5:OV self-cal status=fixed weight=1 selfant 5:PT,true ! 5:PT self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 6:BR,true ! 6:BR self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:MK,true ! 6:MK self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:MK,true ! 8:MK self-cal status=fixed weight=1 selfant 8:OV,true ! 8:OV self-cal status=fixed weight=1 selfant 8:PT,true ! 8:PT self-cal status=fixed weight=1 selfant 9:MK,true ! 9:MK self-cal status=fixed weight=1 selfant 9:OV,true ! 9:OV self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 14 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 14 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 14 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 14 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=0.440395Jy sigma=1.479823 ! Fit after self-cal, rms=0.277859Jy sigma=0.776955 selfant "",false ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 1:ZC self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 2:ZC self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:ZC self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 5:ZC self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KK self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:KK self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 9:KK self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 10:KK self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 10:WZ self-cal status=correctable weight=1 ! 10:ZC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 21 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 67 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 21 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 67 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 21 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 67 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 21 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 67 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=0.277859Jy sigma=0.776955 ! Fit after self-cal, rms=0.204991Jy sigma=0.496815 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=0.5285 mas, bmaj=1.085 mas, bpa=-7.921 degrees ! Estimated noise=5.83663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0463392 Jy ! Component: 100 - total flux cleaned = -0.0502886 Jy ! Component: 150 - total flux cleaned = -0.0514376 Jy ! Component: 200 - total flux cleaned = -0.0524247 Jy ! Total flux subtracted in 200 components = -0.0524247 Jy ! Clean residual min=-0.017551 max=0.017813 Jy/beam ! Clean residual mean=0.000008 rms=0.003645 Jy/beam ! Combined flux in latest and established models = 1.77742 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 1.77742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189655Jy sigma=0.451597 ! Fit after self-cal, rms=0.187054Jy sigma=0.441789 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=0.6407 mas, bmaj=1.187 mas, bpa=-10.88 degrees ! Estimated noise=4.76681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012793 Jy ! Component: 100 - total flux cleaned = 0.0156009 Jy ! Component: 150 - total flux cleaned = 0.0174225 Jy ! Component: 200 - total flux cleaned = 0.0190312 Jy ! Component: 250 - total flux cleaned = 0.0190347 Jy ! Component: 300 - total flux cleaned = 0.0195104 Jy ! Component: 350 - total flux cleaned = 0.0195144 Jy ! Component: 400 - total flux cleaned = 0.0199398 Jy ! Total flux subtracted in 400 components = 0.0199398 Jy ! Clean residual min=-0.014354 max=0.014277 Jy/beam ! Clean residual mean=0.000018 rms=0.003022 Jy/beam ! Combined flux in latest and established models = 1.79736 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 100 components and 1.79736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178995Jy sigma=0.419639 ! Fit after self-cal, rms=0.178273Jy sigma=0.418174 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00230156 Jy ! Component: 100 - total flux cleaned = -0.00186955 Jy ! Component: 150 - total flux cleaned = -0.00146553 Jy ! Component: 200 - total flux cleaned = -0.000729008 Jy ! Component: 250 - total flux cleaned = -0.000729782 Jy ! Component: 300 - total flux cleaned = -0.000729264 Jy ! Component: 350 - total flux cleaned = -0.000725535 Jy ! Component: 400 - total flux cleaned = -0.000718483 Jy ! Total flux subtracted in 400 components = -0.000718483 Jy ! Clean residual min=-0.013132 max=0.014324 Jy/beam ! Clean residual mean=0.000018 rms=0.002917 Jy/beam ! Combined flux in latest and established models = 1.79664 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 108 components and 1.79664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174879Jy sigma=0.409294 ! Fit after self-cal, rms=0.174481Jy sigma=0.408571 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Added new window around map position (-4.2, -1.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125266 Jy ! Component: 100 - total flux cleaned = 0.0146319 Jy ! Component: 150 - total flux cleaned = 0.0157263 Jy ! Component: 200 - total flux cleaned = 0.0160542 Jy ! Component: 250 - total flux cleaned = 0.016677 Jy ! Component: 300 - total flux cleaned = 0.0172755 Jy ! Component: 350 - total flux cleaned = 0.0181145 Jy ! Component: 400 - total flux cleaned = 0.0186459 Jy ! Total flux subtracted in 400 components = 0.0186459 Jy ! Clean residual min=-0.012320 max=0.012951 Jy/beam ! Clean residual mean=0.000009 rms=0.002757 Jy/beam ! Combined flux in latest and established models = 1.81529 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 126 components and 1.81529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171300Jy sigma=0.401067 ! Fit after self-cal, rms=0.171006Jy sigma=0.400041 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Added new window around map position (7, -12.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695383 Jy ! Component: 100 - total flux cleaned = 0.0092679 Jy ! Component: 150 - total flux cleaned = 0.010463 Jy ! Component: 200 - total flux cleaned = 0.0107487 Jy ! Component: 250 - total flux cleaned = 0.0112756 Jy ! Component: 300 - total flux cleaned = 0.0115278 Jy ! Component: 350 - total flux cleaned = 0.0120152 Jy ! Component: 400 - total flux cleaned = 0.0117763 Jy ! Total flux subtracted in 400 components = 0.0117763 Jy ! Clean residual min=-0.011285 max=0.011663 Jy/beam ! Clean residual mean=0.000012 rms=0.002650 Jy/beam ! Combined flux in latest and established models = 1.82707 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 147 components and 1.82707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168741Jy sigma=0.395583 ! Fit after self-cal, rms=0.168620Jy sigma=0.395167 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Added new window around map position (-18.4, -13.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112664 Jy ! Component: 100 - total flux cleaned = 0.0154811 Jy ! Component: 150 - total flux cleaned = 0.0176157 Jy ! Component: 200 - total flux cleaned = 0.0191163 Jy ! Component: 250 - total flux cleaned = 0.020075 Jy ! Component: 300 - total flux cleaned = 0.0210009 Jy ! Component: 350 - total flux cleaned = 0.0214505 Jy ! Component: 400 - total flux cleaned = 0.0223287 Jy ! Total flux subtracted in 400 components = 0.0223287 Jy ! Clean residual min=-0.010872 max=0.011099 Jy/beam ! Clean residual mean=0.000017 rms=0.002574 Jy/beam ! Combined flux in latest and established models = 1.8494 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 168 components and 1.8494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166284Jy sigma=0.391511 ! Fit after self-cal, rms=0.166200Jy sigma=0.391138 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Added new window around map position (-1.6, 1.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508808 Jy ! Component: 100 - total flux cleaned = 0.00509901 Jy ! Component: 150 - total flux cleaned = 0.00539417 Jy ! Component: 200 - total flux cleaned = 0.00592436 Jy ! Component: 250 - total flux cleaned = 0.00693656 Jy ! Component: 300 - total flux cleaned = 0.00790851 Jy ! Component: 350 - total flux cleaned = 0.00860514 Jy ! Component: 400 - total flux cleaned = 0.00905496 Jy ! Total flux subtracted in 400 components = 0.00905496 Jy ! Clean residual min=-0.010396 max=0.010401 Jy/beam ! Clean residual mean=0.000014 rms=0.002491 Jy/beam ! Combined flux in latest and established models = 1.85845 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 197 components and 1.85845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163848Jy sigma=0.386663 ! Fit after self-cal, rms=0.163714Jy sigma=0.386292 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 30 telescope corrections were flagged in sub-array 5. ! A total of 81 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 30 telescope corrections were flagged in sub-array 5. ! A total of 81 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 30 telescope corrections were flagged in sub-array 5. ! A total of 81 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 30 telescope corrections were flagged in sub-array 5. ! A total of 81 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=0.428425Jy sigma=1.189590 ! Fit after self-cal, rms=0.153587Jy sigma=0.366893 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=0.6367 mas, bmaj=1.19 mas, bpa=-10.9 degrees ! Estimated noise=4.77801 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000633382 Jy ! Component: 100 - total flux cleaned = -0.00308846 Jy ! Component: 150 - total flux cleaned = -0.00544084 Jy ! Component: 200 - total flux cleaned = -0.00660997 Jy ! Component: 250 - total flux cleaned = -0.00712927 Jy ! Component: 300 - total flux cleaned = -0.00760752 Jy ! Component: 350 - total flux cleaned = -0.0076014 Jy ! Component: 400 - total flux cleaned = -0.00739754 Jy ! Total flux subtracted in 400 components = -0.00739754 Jy ! Clean residual min=-0.008811 max=0.008720 Jy/beam ! Clean residual mean=0.000005 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 1.85105 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 214 components and 1.85105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150918Jy sigma=0.359534 ! Fit after self-cal, rms=0.150693Jy sigma=0.359082 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293691 Jy ! Component: 100 - total flux cleaned = -9.03517e-05 Jy ! Component: 150 - total flux cleaned = 0.000688922 Jy ! Component: 200 - total flux cleaned = 0.00106284 Jy ! Component: 250 - total flux cleaned = 0.00142617 Jy ! Component: 300 - total flux cleaned = 0.00177455 Jy ! Component: 350 - total flux cleaned = 0.00194404 Jy ! Component: 400 - total flux cleaned = 0.00227299 Jy ! Total flux subtracted in 400 components = 0.00227299 Jy ! Clean residual min=-0.008662 max=0.008502 Jy/beam ! Clean residual mean=0.000006 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 1.85333 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 225 components and 1.85333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149653Jy sigma=0.356856 ! Fit after self-cal, rms=0.149571Jy sigma=0.356723 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149571Jy sigma=0.356723 ! Fit after self-cal, rms=0.147474Jy sigma=0.353292 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=0.6344 mas, bmaj=1.192 mas, bpa=-10.92 degrees ! Estimated noise=4.781 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183117 Jy ! Component: 100 - total flux cleaned = -0.00141416 Jy ! Component: 150 - total flux cleaned = -0.00275079 Jy ! Component: 200 - total flux cleaned = -0.00353839 Jy ! Component: 250 - total flux cleaned = -0.0042588 Jy ! Component: 300 - total flux cleaned = -0.00493196 Jy ! Component: 350 - total flux cleaned = -0.0050889 Jy ! Component: 400 - total flux cleaned = -0.00524083 Jy ! Total flux subtracted in 400 components = -0.00524083 Jy ! Clean residual min=-0.008146 max=0.007855 Jy/beam ! Clean residual mean=0.000004 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 1.84809 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 237 components and 1.84809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146164Jy sigma=0.349581 ! Fit after self-cal, rms=0.146067Jy sigma=0.349410 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, 22.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719373 Jy ! Component: 100 - total flux cleaned = 0.00831463 Jy ! Component: 150 - total flux cleaned = 0.00928208 Jy ! Component: 200 - total flux cleaned = 0.0103375 Jy ! Component: 250 - total flux cleaned = 0.0109139 Jy ! Component: 300 - total flux cleaned = 0.0116126 Jy ! Component: 350 - total flux cleaned = 0.0120193 Jy ! Component: 400 - total flux cleaned = 0.0122847 Jy ! Total flux subtracted in 400 components = 0.0122847 Jy ! Clean residual min=-0.007755 max=0.007542 Jy/beam ! Clean residual mean=0.000006 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 1.86037 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 262 components and 1.86037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145101Jy sigma=0.347244 ! Fit after self-cal, rms=0.145071Jy sigma=0.347051 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145071Jy sigma=0.347051 ! Fit after self-cal, rms=0.141636Jy sigma=0.341139 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=2.64 mas, bmaj=2.859 mas, bpa=63.11 degrees ! Estimated noise=6.85777 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130167 Jy ! Component: 100 - total flux cleaned = -0.00177611 Jy ! Component: 150 - total flux cleaned = -0.00262793 Jy ! Component: 200 - total flux cleaned = -0.00338871 Jy ! Component: 250 - total flux cleaned = -0.00396115 Jy ! Component: 300 - total flux cleaned = -0.00438085 Jy ! Component: 350 - total flux cleaned = -0.00458166 Jy ! Component: 400 - total flux cleaned = -0.00477231 Jy ! Total flux subtracted in 400 components = -0.00477231 Jy ! Clean residual min=-0.009788 max=0.009366 Jy/beam ! Clean residual mean=0.000013 rms=0.002812 Jy/beam ! Combined flux in latest and established models = 1.8556 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 288 components and 1.8556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141512Jy sigma=0.340926 ! Fit after self-cal, rms=0.141509Jy sigma=0.340802 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156099 Jy ! Component: 100 - total flux cleaned = -0.000431083 Jy ! Component: 150 - total flux cleaned = -0.000518718 Jy ! Component: 200 - total flux cleaned = -0.000689902 Jy ! Component: 250 - total flux cleaned = -0.000850952 Jy ! Component: 300 - total flux cleaned = -0.000850175 Jy ! Component: 350 - total flux cleaned = -0.00100412 Jy ! Component: 400 - total flux cleaned = -0.00107645 Jy ! Total flux subtracted in 400 components = -0.00107645 Jy ! Clean residual min=-0.009642 max=0.009178 Jy/beam ! Clean residual mean=0.000013 rms=0.002778 Jy/beam ! Combined flux in latest and established models = 1.85452 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 300 components and 1.85452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141476Jy sigma=0.340731 ! Fit after self-cal, rms=0.141472Jy sigma=0.340700 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=0.6328 mas, bmaj=1.193 mas, bpa=-10.9 degrees ! Estimated noise=4.78045 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6328 x 1.193 at -10.9 degrees (North through East) ! Clean map min=-0.015082 max=1.4428 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141472Jy sigma=0.340700 ! Fit after self-cal, rms=0.130428Jy sigma=0.312991 ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=0.6329 mas, bmaj=1.193 mas, bpa=-10.9 degrees ! Estimated noise=4.79145 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854698 Jy ! Component: 100 - total flux cleaned = -9.01064e-05 Jy ! Component: 150 - total flux cleaned = -0.000429596 Jy ! Component: 200 - total flux cleaned = -0.000119575 Jy ! Component: 250 - total flux cleaned = 0.000315639 Jy ! Component: 300 - total flux cleaned = 0.000455559 Jy ! Component: 350 - total flux cleaned = 0.000719528 Jy ! Component: 400 - total flux cleaned = 0.00071974 Jy ! Total flux subtracted in 400 components = 0.00071974 Jy ! Clean residual min=-0.007110 max=0.007328 Jy/beam ! Clean residual mean=0.000003 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 1.85524 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 318 components and 1.85524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129578Jy sigma=0.310618 ! Fit after self-cal, rms=0.129535Jy sigma=0.310536 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Added new window around map position (40.4, 16.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664975 Jy ! Component: 100 - total flux cleaned = 0.0102964 Jy ! Component: 150 - total flux cleaned = 0.0116513 Jy ! Component: 200 - total flux cleaned = 0.0125476 Jy ! Component: 250 - total flux cleaned = 0.0129154 Jy ! Component: 300 - total flux cleaned = 0.0132723 Jy ! Component: 350 - total flux cleaned = 0.0132706 Jy ! Component: 400 - total flux cleaned = 0.0132698 Jy ! Total flux subtracted in 400 components = 0.0132698 Jy ! Clean residual min=-0.007022 max=0.006688 Jy/beam ! Clean residual mean=0.000005 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 1.86851 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 341 components and 1.86851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128800Jy sigma=0.308249 ! Fit after self-cal, rms=0.128762Jy sigma=0.308139 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128762Jy sigma=0.308139 ! Fit after self-cal, rms=0.128214Jy sigma=0.307367 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=0.521 mas, bmaj=1.092 mas, bpa=-7.953 degrees ! Estimated noise=5.85675 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13785 Jy ! Component: 100 - total flux cleaned = 1.40117 Jy ! Component: 150 - total flux cleaned = 1.51348 Jy ! Component: 200 - total flux cleaned = 1.57997 Jy ! Component: 250 - total flux cleaned = 1.6259 Jy ! Component: 300 - total flux cleaned = 1.65889 Jy ! Component: 350 - total flux cleaned = 1.68428 Jy ! Component: 400 - total flux cleaned = 1.7045 Jy ! Total flux subtracted in 400 components = 1.7045 Jy ! Clean residual min=-0.010469 max=0.014704 Jy/beam ! Clean residual mean=0.000010 rms=0.002533 Jy/beam ! Combined flux in latest and established models = 1.7045 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.7045 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=0.6319 mas, bmaj=1.194 mas, bpa=-10.88 degrees ! Estimated noise=4.79151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274386 Jy ! Component: 100 - total flux cleaned = 0.0467056 Jy ! Component: 150 - total flux cleaned = 0.0618786 Jy ! Component: 200 - total flux cleaned = 0.074438 Jy ! Component: 250 - total flux cleaned = 0.0853481 Jy ! Component: 300 - total flux cleaned = 0.0943179 Jy ! Component: 350 - total flux cleaned = 0.100059 Jy ! Component: 400 - total flux cleaned = 0.104776 Jy ! Total flux subtracted in 400 components = 0.104776 Jy ! Clean residual min=-0.008240 max=0.010139 Jy/beam ! Clean residual mean=0.000001 rms=0.001997 Jy/beam ! Combined flux in latest and established models = 1.80927 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 96 components and 1.80927 Jy ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Added new window around map position (-10.6, 15). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00754238 Jy ! Component: 100 - total flux cleaned = 0.0102788 Jy ! Component: 150 - total flux cleaned = 0.0137475 Jy ! Component: 200 - total flux cleaned = 0.0165109 Jy ! Component: 250 - total flux cleaned = 0.0194273 Jy ! Component: 300 - total flux cleaned = 0.0222301 Jy ! Component: 350 - total flux cleaned = 0.0246807 Jy ! Component: 400 - total flux cleaned = 0.0268116 Jy ! Total flux subtracted in 400 components = 0.0268116 Jy ! Clean residual min=-0.007907 max=0.007594 Jy/beam ! Clean residual mean=0.000005 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 1.83608 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 134 components and 1.83608 Jy ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=2.645 mas, bmaj=2.863 mas, bpa=63.13 degrees ! Estimated noise=6.87075 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0083129 Jy ! Component: 100 - total flux cleaned = 0.0123619 Jy ! Component: 150 - total flux cleaned = 0.016151 Jy ! Component: 200 - total flux cleaned = 0.0189024 Jy ! Component: 250 - total flux cleaned = 0.0211986 Jy ! Component: 300 - total flux cleaned = 0.0227704 Jy ! Component: 350 - total flux cleaned = 0.0242233 Jy ! Component: 400 - total flux cleaned = 0.0252732 Jy ! Total flux subtracted in 400 components = 0.0252732 Jy ! Clean residual min=-0.009123 max=0.009212 Jy/beam ! Clean residual mean=0.000006 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 1.86136 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26.6, -1.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731476 Jy ! Component: 100 - total flux cleaned = 0.00911776 Jy ! Component: 150 - total flux cleaned = 0.0103545 Jy ! Component: 200 - total flux cleaned = 0.0113206 Jy ! Component: 250 - total flux cleaned = 0.0123767 Jy ! Component: 300 - total flux cleaned = 0.0133736 Jy ! Component: 350 - total flux cleaned = 0.0141856 Jy ! Component: 400 - total flux cleaned = 0.0148311 Jy ! Total flux subtracted in 400 components = 0.0148311 Jy ! Clean residual min=-0.008326 max=0.008351 Jy/beam ! Clean residual mean=-0.000013 rms=0.002284 Jy/beam ! Combined flux in latest and established models = 1.87619 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 222 components and 1.87619 Jy ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! Estimated beam: bmin=0.6319 mas, bmaj=1.194 mas, bpa=-10.88 degrees ! Estimated noise=4.79151 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000517849 Jy ! Component: 100 - total flux cleaned = -0.000758016 Jy ! Component: 150 - total flux cleaned = -0.000552965 Jy ! Component: 200 - total flux cleaned = -0.000554775 Jy ! Component: 250 - total flux cleaned = -0.000157898 Jy ! Component: 300 - total flux cleaned = -0.000158272 Jy ! Component: 350 - total flux cleaned = 0.000583028 Jy ! Component: 400 - total flux cleaned = 0.000765339 Jy ! Total flux subtracted in 400 components = 0.000765339 Jy ! Clean residual min=-0.006715 max=0.006892 Jy/beam ! Clean residual mean=-0.000003 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 1.87695 Jy selfcal ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 270 components and 1.87695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129881Jy sigma=0.310498 ! Fit after self-cal, rms=0.128382Jy sigma=0.304872 wmodel /scr/pima/rdv73_uvs/J0854+2006_X_map.mod ! Writing 270 model components to file: /scr/pima/rdv73_uvs/J0854+2006_X_map.mod wobs /scr/pima/rdv73_uvs/J0854+2006_X_uvs.fits ! Applying 814 buffered edits. ! Writing UV FITS file: /scr/pima/rdv73_uvs/J0854+2006_X_uvs.fits wwins /scr/pima/rdv73_uvs/J0854+2006_X_map.win ! wwins: Wrote 11 windows to /scr/pima/rdv73_uvs/J0854+2006_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151219 Jy ! Component: 100 - total flux cleaned = -0.00151012 Jy ! Component: 150 - total flux cleaned = -0.00151126 Jy ! Component: 200 - total flux cleaned = -0.00151324 Jy ! Component: 250 - total flux cleaned = -0.00140593 Jy ! Component: 300 - total flux cleaned = -0.001192 Jy ! Component: 350 - total flux cleaned = -0.000875699 Jy ! Component: 400 - total flux cleaned = -0.000462315 Jy ! Component: 450 - total flux cleaned = -0.000670525 Jy ! Component: 500 - total flux cleaned = -0.000873289 Jy ! Component: 550 - total flux cleaned = -0.000572781 Jy ! Component: 600 - total flux cleaned = -0.000573383 Jy ! Component: 650 - total flux cleaned = -0.000378046 Jy ! Component: 700 - total flux cleaned = -0.000767062 Jy ! Component: 750 - total flux cleaned = -0.000765839 Jy ! Component: 800 - total flux cleaned = -0.000575302 Jy ! Component: 850 - total flux cleaned = -0.000762613 Jy ! Component: 900 - total flux cleaned = -0.000481983 Jy ! Component: 950 - total flux cleaned = -0.000574911 Jy ! Component: 1000 - total flux cleaned = -0.000482882 Jy ! Component: 1050 - total flux cleaned = -0.000573373 Jy ! Component: 1100 - total flux cleaned = -0.000482271 Jy ! Component: 1150 - total flux cleaned = -0.000391738 Jy ! Component: 1200 - total flux cleaned = -0.000481011 Jy ! Component: 1250 - total flux cleaned = -0.000214381 Jy ! Component: 1300 - total flux cleaned = -0.000126557 Jy ! Component: 1350 - total flux cleaned = 0.0001366 Jy ! Component: 1400 - total flux cleaned = 0.000223036 Jy ! Component: 1450 - total flux cleaned = 0.000481047 Jy ! Component: 1500 - total flux cleaned = 0.000310244 Jy ! Component: 1550 - total flux cleaned = 0.000650621 Jy ! Component: 1600 - total flux cleaned = 0.000736227 Jy ! Component: 1650 - total flux cleaned = 0.000316361 Jy ! Component: 1700 - total flux cleaned = 0.00106822 Jy ! Component: 1750 - total flux cleaned = 0.000819902 Jy ! Component: 1800 - total flux cleaned = 0.000984967 Jy ! Component: 1850 - total flux cleaned = 0.00131274 Jy ! Component: 1900 - total flux cleaned = 0.00123147 Jy ! Component: 1950 - total flux cleaned = 0.00114983 Jy ! Component: 2000 - total flux cleaned = 0.00155292 Jy ! Component: 2050 - total flux cleaned = 0.00155249 Jy ! Component: 2100 - total flux cleaned = 0.00155264 Jy ! Component: 2150 - total flux cleaned = 0.00171156 Jy ! Component: 2200 - total flux cleaned = 0.00202721 Jy ! Component: 2250 - total flux cleaned = 0.00210574 Jy ! Component: 2300 - total flux cleaned = 0.00194972 Jy ! Component: 2350 - total flux cleaned = 0.00210499 Jy ! Component: 2400 - total flux cleaned = 0.00233632 Jy ! Component: 2450 - total flux cleaned = 0.00218238 Jy ! Component: 2500 - total flux cleaned = 0.00233606 Jy ! Component: 2550 - total flux cleaned = 0.00203214 Jy ! Component: 2600 - total flux cleaned = 0.00210817 Jy ! Component: 2650 - total flux cleaned = 0.00271082 Jy ! Component: 2700 - total flux cleaned = 0.00256086 Jy ! Component: 2750 - total flux cleaned = 0.00218766 Jy ! Component: 2800 - total flux cleaned = 0.00218816 Jy ! Component: 2850 - total flux cleaned = 0.00240954 Jy ! Component: 2900 - total flux cleaned = 0.00248433 Jy ! Component: 2950 - total flux cleaned = 0.00248427 Jy ! Component: 3000 - total flux cleaned = 0.00233834 Jy ! Component: 3050 - total flux cleaned = 0.00241075 Jy ! Component: 3100 - total flux cleaned = 0.00226627 Jy ! Component: 3150 - total flux cleaned = 0.00197925 Jy ! Component: 3200 - total flux cleaned = 0.00212241 Jy ! Component: 3250 - total flux cleaned = 0.00262164 Jy ! Component: 3300 - total flux cleaned = 0.00240833 Jy ! Component: 3350 - total flux cleaned = 0.00255016 Jy ! Component: 3400 - total flux cleaned = 0.00283162 Jy ! Component: 3450 - total flux cleaned = 0.00290154 Jy ! Component: 3500 - total flux cleaned = 0.00276156 Jy ! Component: 3550 - total flux cleaned = 0.00283098 Jy ! Component: 3600 - total flux cleaned = 0.00248499 Jy ! Component: 3650 - total flux cleaned = 0.00296768 Jy ! Component: 3700 - total flux cleaned = 0.00303619 Jy ! Component: 3750 - total flux cleaned = 0.00283071 Jy ! Component: 3800 - total flux cleaned = 0.00317166 Jy ! Component: 3850 - total flux cleaned = 0.002832 Jy ! Component: 3900 - total flux cleaned = 0.00310231 Jy ! Component: 3950 - total flux cleaned = 0.00330446 Jy ! Component: 4000 - total flux cleaned = 0.00316976 Jy ! Component: 4050 - total flux cleaned = 0.00323686 Jy ! Total flux subtracted in 4096 components = 0.00310358 Jy ! Clean residual min=-0.004186 max=0.003784 Jy/beam ! Clean residual mean=-0.000004 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 1.88006 Jy keep ! Adding 343 model components to the UV plane model. ! The established model now contains 613 components and 1.88006 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv73_uvs/J0854+2006_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6319 x 1.194 at -10.88 degrees (North through East) ! Clean map min=-0.0063407 max=1.4537 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv73_uvs/J0854+2006_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 4.57% of the data. ! The x-axis pixel size should ideally be below 0.1767 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 1.4537 rms= 0.00112 Jy quit ! Quitting program ! Log file /scr/pima/rdv73_uvs/J0854+2006_X_uvs.log closed on Sat Jan 9 17:32:58 2016