! Started logfile: /scr/pima/rdv73_uvs/J0534-3747_X_uvs.log on Sat Jan 9 17:31:24 2016 obs /scr/pima/rdv73_uvs/J0534-3747_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv73_uvs/J0534-3747_X_uva.fits ! AN table 1: 42 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.931973 visibilities/baseline/integration-bin. ! Found source: J0534-3747 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4384 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv73_uvs/J0534-3747_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:FD self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.050798Jy sigma=7.427713 ! Fit after self-cal, rms=0.746144Jy sigma=5.276316 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5669 mas, bmaj=1.607 mas, bpa=-2.008 degrees ! Estimated noise=3.17624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200278 Jy ! Component: 100 - total flux cleaned = 0.245095 Jy ! Total flux subtracted in 100 components = 0.245095 Jy ! Clean residual min=-0.018351 max=0.030380 Jy/beam ! Clean residual mean=0.000012 rms=0.004458 Jy/beam ! Combined flux in latest and established models = 0.245095 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.245095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123108Jy sigma=0.795234 ! Fit after self-cal, rms=0.123095Jy sigma=0.795177 ! Inverting map ! Added new window around map position (1.8, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266152 Jy ! Component: 100 - total flux cleaned = 0.038066 Jy ! Total flux subtracted in 100 components = 0.038066 Jy ! Clean residual min=-0.015656 max=0.023460 Jy/beam ! Clean residual mean=0.000003 rms=0.003865 Jy/beam ! Combined flux in latest and established models = 0.283161 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.283161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117649Jy sigma=0.771077 ! Fit after self-cal, rms=0.116667Jy sigma=0.762334 ! Inverting map ! Added new window around map position (-12, -9.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251034 Jy ! Component: 100 - total flux cleaned = 0.0408173 Jy ! Total flux subtracted in 100 components = 0.0408173 Jy ! Clean residual min=-0.015541 max=0.017084 Jy/beam ! Clean residual mean=0.000004 rms=0.003250 Jy/beam ! Combined flux in latest and established models = 0.323979 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.323979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105662Jy sigma=0.686834 ! Fit after self-cal, rms=0.104862Jy sigma=0.681413 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7727 mas, bmaj=2.074 mas, bpa=-1.424 degrees ! Estimated noise=1.60684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.4, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025268 Jy ! Component: 100 - total flux cleaned = 0.0383254 Jy ! Component: 150 - total flux cleaned = 0.0479197 Jy ! Component: 200 - total flux cleaned = 0.0552568 Jy ! Total flux subtracted in 200 components = 0.0552568 Jy ! Clean residual min=-0.012227 max=0.015354 Jy/beam ! Clean residual mean=-0.000002 rms=0.003238 Jy/beam ! Combined flux in latest and established models = 0.379235 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 73 components and 0.379235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097687Jy sigma=0.639253 ! Fit after self-cal, rms=0.097061Jy sigma=0.633714 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 KP 0.95 LA 1.00 MK 0.95 ! NL 1.30 OV 0.95 PT 0.99 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 KP 0.91 LA 1.02 MK 0.96 ! NL 1.24 OV 0.93 PT 1.04 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 KP 0.82 LA 1.08 MK 0.94 ! NL 1.31 OV 0.97 PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 0.90 LA 1.09 MK 0.97 ! NL 1.31 OV 0.93 PT 1.02 SC 1.00 ! ! ! Fit before self-cal, rms=0.097061Jy sigma=0.633714 ! Fit after self-cal, rms=0.095347Jy sigma=0.591673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7729 mas, bmaj=2.073 mas, bpa=-1.401 degrees ! Estimated noise=1.60882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.6, -9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465293 Jy ! Component: 100 - total flux cleaned = 0.00670783 Jy ! Component: 150 - total flux cleaned = 0.00875613 Jy ! Component: 200 - total flux cleaned = 0.0104168 Jy ! Total flux subtracted in 200 components = 0.0104168 Jy ! Clean residual min=-0.005515 max=0.005506 Jy/beam ! Clean residual mean=0.000005 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.389652 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.389652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093921Jy sigma=0.583592 ! Fit after self-cal, rms=0.093859Jy sigma=0.582762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093859Jy sigma=0.582762 ! Fit after self-cal, rms=0.094916Jy sigma=0.582037 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7746 mas, bmaj=2.076 mas, bpa=-1.419 degrees ! Estimated noise=1.60934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019422 Jy ! Component: 100 - total flux cleaned = 0.0035327 Jy ! Component: 150 - total flux cleaned = 0.00463352 Jy ! Component: 200 - total flux cleaned = 0.00511864 Jy ! Total flux subtracted in 200 components = 0.00511864 Jy ! Clean residual min=-0.005168 max=0.005299 Jy/beam ! Clean residual mean=0.000003 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.394771 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 116 components and 0.394771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094516Jy sigma=0.580202 ! Fit after self-cal, rms=0.094482Jy sigma=0.580011 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276712 Jy ! Component: 100 - total flux cleaned = 0.000701281 Jy ! Component: 150 - total flux cleaned = 0.000937278 Jy ! Component: 200 - total flux cleaned = 0.00108056 Jy ! Total flux subtracted in 200 components = 0.00108056 Jy ! Clean residual min=-0.004956 max=0.005002 Jy/beam ! Clean residual mean=0.000003 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.395851 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 124 components and 0.395851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094313Jy sigma=0.579299 ! Fit after self-cal, rms=0.094288Jy sigma=0.579236 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094288Jy sigma=0.579236 ! Fit after self-cal, rms=0.095021Jy sigma=0.576696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7751 mas, bmaj=2.082 mas, bpa=-1.177 degrees ! Estimated noise=1.61224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000919202 Jy ! Component: 100 - total flux cleaned = 0.00136595 Jy ! Component: 150 - total flux cleaned = 0.00162681 Jy ! Component: 200 - total flux cleaned = 0.0019307 Jy ! Total flux subtracted in 200 components = 0.0019307 Jy ! Clean residual min=-0.004746 max=0.004873 Jy/beam ! Clean residual mean=0.000002 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.397782 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 132 components and 0.397782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094890Jy sigma=0.576123 ! Fit after self-cal, rms=0.094900Jy sigma=0.576080 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300608 Jy ! Component: 100 - total flux cleaned = 0.000578549 Jy ! Component: 150 - total flux cleaned = 0.000630062 Jy ! Component: 200 - total flux cleaned = 0.000681707 Jy ! Total flux subtracted in 200 components = 0.000681707 Jy ! Clean residual min=-0.004805 max=0.004769 Jy/beam ! Clean residual mean=0.000002 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.398464 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 142 components and 0.398464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094829Jy sigma=0.575768 ! Fit after self-cal, rms=0.094822Jy sigma=0.575756 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094822Jy sigma=0.575756 ! Fit after self-cal, rms=0.095034Jy sigma=0.575657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=8.856 mas, bpa=1.977 degrees ! Estimated noise=2.03569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117941 Jy ! Component: 100 - total flux cleaned = 0.00153426 Jy ! Component: 150 - total flux cleaned = 0.00180317 Jy ! Component: 200 - total flux cleaned = 0.00204542 Jy ! Total flux subtracted in 200 components = 0.00204542 Jy ! Clean residual min=-0.005001 max=0.006805 Jy/beam ! Clean residual mean=0.000004 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.400509 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 157 components and 0.400509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095008Jy sigma=0.575541 ! Fit after self-cal, rms=0.095004Jy sigma=0.575506 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.2, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055953 Jy ! Component: 100 - total flux cleaned = 0.00720737 Jy ! Component: 150 - total flux cleaned = 0.00817241 Jy ! Component: 200 - total flux cleaned = 0.00910958 Jy ! Total flux subtracted in 200 components = 0.00910958 Jy ! Clean residual min=-0.003901 max=0.004237 Jy/beam ! Clean residual mean=0.000006 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.409619 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 196 components and 0.409619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094682Jy sigma=0.573938 ! Fit after self-cal, rms=0.094681Jy sigma=0.573815 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 1:SC,true ! 1:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094681Jy sigma=0.573815 ! Fit after self-cal, rms=0.094681Jy sigma=0.573815 selfant "",false ! 1:FD self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094681Jy sigma=0.573815 ! Fit after self-cal, rms=0.094517Jy sigma=0.573644 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5654 mas, bmaj=1.599 mas, bpa=-1.556 degrees ! Estimated noise=3.22237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.4, 46.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518096 Jy ! Component: 100 - total flux cleaned = 0.00517037 Jy ! Component: 150 - total flux cleaned = 0.00537273 Jy ! Component: 200 - total flux cleaned = 0.0057219 Jy ! Total flux subtracted in 200 components = 0.0057219 Jy ! Clean residual min=-0.006566 max=0.006600 Jy/beam ! Clean residual mean=-0.000001 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.415341 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 223 components and 0.415341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094287Jy sigma=0.572820 ! Fit after self-cal, rms=0.094295Jy sigma=0.572433 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7763 mas, bmaj=2.084 mas, bpa=-1.186 degrees ! Estimated noise=1.60798 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000701337 Jy ! Component: 100 - total flux cleaned = -0.000700436 Jy ! Component: 150 - total flux cleaned = -0.000698793 Jy ! Component: 200 - total flux cleaned = -0.000394904 Jy ! Component: 250 - total flux cleaned = -0.000113576 Jy ! Component: 300 - total flux cleaned = 0.000220069 Jy ! Component: 350 - total flux cleaned = 0.000474854 Jy ! Component: 400 - total flux cleaned = 0.0006563 Jy ! Total flux subtracted in 400 components = 0.0006563 Jy ! Clean residual min=-0.003636 max=0.003321 Jy/beam ! Clean residual mean=0.000001 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.415997 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 279 components and 0.415997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093990Jy sigma=0.570741 ! Fit after self-cal, rms=0.093971Jy sigma=0.570651 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000399637 Jy ! Component: 100 - total flux cleaned = -0.00051739 Jy ! Component: 150 - total flux cleaned = -0.000403554 Jy ! Component: 200 - total flux cleaned = -0.000241145 Jy ! Component: 250 - total flux cleaned = -0.000137475 Jy ! Component: 300 - total flux cleaned = -8.74133e-05 Jy ! Component: 350 - total flux cleaned = -8.70967e-05 Jy ! Component: 400 - total flux cleaned = -4.01262e-05 Jy ! Total flux subtracted in 400 components = -4.01262e-05 Jy ! Clean residual min=-0.003327 max=0.003195 Jy/beam ! Clean residual mean=0.000002 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.415957 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 300 components and 0.415957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093837Jy sigma=0.570003 ! Fit after self-cal, rms=0.093831Jy sigma=0.569979 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093831Jy sigma=0.569979 ! Fit after self-cal, rms=0.093954Jy sigma=0.569856 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.777 mas, bmaj=2.085 mas, bpa=-1.124 degrees ! Estimated noise=1.60756 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000649718 Jy ! Component: 100 - total flux cleaned = -0.000752929 Jy ! Component: 150 - total flux cleaned = -0.000751993 Jy ! Component: 200 - total flux cleaned = -0.00070495 Jy ! Component: 250 - total flux cleaned = -0.00070398 Jy ! Component: 300 - total flux cleaned = -0.000574528 Jy ! Component: 350 - total flux cleaned = -0.000451227 Jy ! Component: 400 - total flux cleaned = -0.000490942 Jy ! Total flux subtracted in 400 components = -0.000490942 Jy ! Clean residual min=-0.003102 max=0.002902 Jy/beam ! Clean residual mean=0.000002 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.415466 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 320 components and 0.415466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093854Jy sigma=0.569381 ! Fit after self-cal, rms=0.093852Jy sigma=0.569368 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135128 Jy ! Component: 100 - total flux cleaned = -5.61336e-05 Jy ! Component: 150 - total flux cleaned = -1.78983e-05 Jy ! Component: 200 - total flux cleaned = -1.73589e-05 Jy ! Component: 250 - total flux cleaned = 5.6237e-05 Jy ! Component: 300 - total flux cleaned = 9.17941e-05 Jy ! Component: 350 - total flux cleaned = 0.000127418 Jy ! Component: 400 - total flux cleaned = 0.000196189 Jy ! Total flux subtracted in 400 components = 0.000196189 Jy ! Clean residual min=-0.003102 max=0.002852 Jy/beam ! Clean residual mean=0.000003 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.415662 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 336 components and 0.415662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093785Jy sigma=0.569066 ! Fit after self-cal, rms=0.093783Jy sigma=0.569060 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093783Jy sigma=0.569060 ! Fit after self-cal, rms=0.093889Jy sigma=0.568874 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7775 mas, bmaj=2.083 mas, bpa=-1.103 degrees ! Estimated noise=1.60791 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.927e-05 Jy ! Component: 100 - total flux cleaned = -8.08495e-05 Jy ! Component: 150 - total flux cleaned = -6.40421e-06 Jy ! Component: 200 - total flux cleaned = 2.99753e-05 Jy ! Component: 250 - total flux cleaned = 0.000135611 Jy ! Component: 300 - total flux cleaned = 0.00023763 Jy ! Component: 350 - total flux cleaned = 0.000303999 Jy ! Component: 400 - total flux cleaned = 0.000368765 Jy ! Total flux subtracted in 400 components = 0.000368765 Jy ! Clean residual min=-0.003094 max=0.002916 Jy/beam ! Clean residual mean=0.000003 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.416031 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 351 components and 0.416031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093826Jy sigma=0.568582 ! Fit after self-cal, rms=0.093826Jy sigma=0.568574 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.77245e-05 Jy ! Component: 100 - total flux cleaned = 0.000185837 Jy ! Component: 150 - total flux cleaned = 0.000185763 Jy ! Component: 200 - total flux cleaned = 0.000186428 Jy ! Component: 250 - total flux cleaned = 0.000217232 Jy ! Component: 300 - total flux cleaned = 0.000277199 Jy ! Component: 350 - total flux cleaned = 0.00033528 Jy ! Component: 400 - total flux cleaned = 0.00036356 Jy ! Total flux subtracted in 400 components = 0.00036356 Jy ! Clean residual min=-0.003084 max=0.002839 Jy/beam ! Clean residual mean=0.000003 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.416394 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 365 components and 0.416394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093781Jy sigma=0.568371 ! Fit after self-cal, rms=0.093779Jy sigma=0.568368 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093779Jy sigma=0.568368 ! Fit after self-cal, rms=0.093656Jy sigma=0.554826 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=8.874 mas, bpa=1.997 degrees ! Estimated noise=2.02607 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423792 Jy ! Component: 100 - total flux cleaned = 0.000992549 Jy ! Component: 150 - total flux cleaned = 0.00143437 Jy ! Component: 200 - total flux cleaned = 0.00172823 Jy ! Component: 250 - total flux cleaned = 0.00183934 Jy ! Component: 300 - total flux cleaned = 0.00190217 Jy ! Component: 350 - total flux cleaned = 0.0019833 Jy ! Component: 400 - total flux cleaned = 0.00204081 Jy ! Total flux subtracted in 400 components = 0.00204081 Jy ! Clean residual min=-0.002431 max=0.002527 Jy/beam ! Clean residual mean=0.000002 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.418435 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 389 components and 0.418435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093639Jy sigma=0.554816 ! Fit after self-cal, rms=0.093673Jy sigma=0.554757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (43, 36.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000850135 Jy ! Component: 100 - total flux cleaned = 0.000701076 Jy ! Component: 150 - total flux cleaned = 0.000638025 Jy ! Component: 200 - total flux cleaned = 0.000524342 Jy ! Component: 250 - total flux cleaned = 0.000425176 Jy ! Component: 300 - total flux cleaned = 0.000288508 Jy ! Component: 350 - total flux cleaned = 0.000289427 Jy ! Component: 400 - total flux cleaned = 0.000128312 Jy ! Total flux subtracted in 400 components = 0.000128312 Jy ! Clean residual min=-0.002095 max=0.002017 Jy/beam ! Clean residual mean=0.000002 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.418564 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 446 components and 0.418564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093525Jy sigma=0.554056 ! Fit after self-cal, rms=0.093506Jy sigma=0.554005 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=0.778 mas, bmaj=2.083 mas, bpa=-1.073 degrees ! Estimated noise=1.61179 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.778 x 2.083 at -1.073 degrees (North through East) ! Clean map min=-0.003269 max=0.2552 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5659 mas, bmaj=1.596 mas, bpa=-1.461 degrees ! Estimated noise=3.23763 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203358 Jy ! Component: 100 - total flux cleaned = 0.253774 Jy ! Component: 150 - total flux cleaned = 0.280937 Jy ! Component: 200 - total flux cleaned = 0.300383 Jy ! Component: 250 - total flux cleaned = 0.31524 Jy ! Component: 300 - total flux cleaned = 0.323991 Jy ! Component: 350 - total flux cleaned = 0.330664 Jy ! Component: 400 - total flux cleaned = 0.33543 Jy ! Total flux subtracted in 400 components = 0.33543 Jy ! Clean residual min=-0.007910 max=0.008180 Jy/beam ! Clean residual mean=-0.000001 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.33543 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.33543 Jy ! Inverting map and beam ! Estimated beam: bmin=0.778 mas, bmaj=2.083 mas, bpa=-1.073 degrees ! Estimated noise=1.61179 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158297 Jy ! Component: 100 - total flux cleaned = 0.0258828 Jy ! Component: 150 - total flux cleaned = 0.033484 Jy ! Component: 200 - total flux cleaned = 0.0397028 Jy ! Component: 250 - total flux cleaned = 0.0449989 Jy ! Component: 300 - total flux cleaned = 0.0493955 Jy ! Component: 350 - total flux cleaned = 0.0520111 Jy ! Component: 400 - total flux cleaned = 0.0536638 Jy ! Total flux subtracted in 400 components = 0.0536638 Jy ! Clean residual min=-0.004672 max=0.004547 Jy/beam ! Clean residual mean=0.000002 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.389094 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 146 components and 0.389093 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=8.874 mas, bpa=1.997 degrees ! Estimated noise=2.02607 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490134 Jy ! Component: 100 - total flux cleaned = 0.00862928 Jy ! Component: 150 - total flux cleaned = 0.011435 Jy ! Component: 200 - total flux cleaned = 0.0132883 Jy ! Component: 250 - total flux cleaned = 0.0144632 Jy ! Component: 300 - total flux cleaned = 0.0157522 Jy ! Component: 350 - total flux cleaned = 0.0170514 Jy ! Component: 400 - total flux cleaned = 0.0180895 Jy ! Total flux subtracted in 400 components = 0.0180895 Jy ! Clean residual min=-0.003601 max=0.002980 Jy/beam ! Clean residual mean=0.000002 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.407183 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000976633 Jy ! Component: 100 - total flux cleaned = 0.00189865 Jy ! Component: 150 - total flux cleaned = 0.00262398 Jy ! Component: 200 - total flux cleaned = 0.00344776 Jy ! Component: 250 - total flux cleaned = 0.00390682 Jy ! Component: 300 - total flux cleaned = 0.00447031 Jy ! Component: 350 - total flux cleaned = 0.00494906 Jy ! Component: 400 - total flux cleaned = 0.0054092 Jy ! Total flux subtracted in 400 components = 0.0054092 Jy ! Clean residual min=-0.003037 max=0.002483 Jy/beam ! Clean residual mean=0.000001 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.412592 Jy ! Adding 119 model components to the UV plane model. ! The established model now contains 259 components and 0.412592 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.778 mas, bmaj=2.083 mas, bpa=-1.073 degrees ! Estimated noise=1.61179 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000537573 Jy ! Component: 100 - total flux cleaned = -0.00113036 Jy ! Component: 150 - total flux cleaned = -0.00123882 Jy ! Component: 200 - total flux cleaned = -0.00124456 Jy ! Component: 250 - total flux cleaned = -0.00134128 Jy ! Component: 300 - total flux cleaned = -0.00106462 Jy ! Component: 350 - total flux cleaned = -0.000980487 Jy ! Component: 400 - total flux cleaned = -0.00106618 Jy ! Total flux subtracted in 400 components = -0.00106618 Jy ! Clean residual min=-0.003343 max=0.003097 Jy/beam ! Clean residual mean=-0.000000 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.411526 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 307 components and 0.411526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093846Jy sigma=0.556022 ! Fit after self-cal, rms=0.093747Jy sigma=0.555532 wmodel /scr/pima/rdv73_uvs/J0534-3747_X_map.mod ! Writing 307 model components to file: /scr/pima/rdv73_uvs/J0534-3747_X_map.mod wobs /scr/pima/rdv73_uvs/J0534-3747_X_uvs.fits ! Applying 2352 buffered edits. ! Writing UV FITS file: /scr/pima/rdv73_uvs/J0534-3747_X_uvs.fits wwins /scr/pima/rdv73_uvs/J0534-3747_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rdv73_uvs/J0534-3747_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00086471 Jy ! Component: 100 - total flux cleaned = -0.00112787 Jy ! Component: 150 - total flux cleaned = -0.00122817 Jy ! Component: 200 - total flux cleaned = -0.00151767 Jy ! Component: 250 - total flux cleaned = -0.00175076 Jy ! Component: 300 - total flux cleaned = -0.00193307 Jy ! Component: 350 - total flux cleaned = -0.00210965 Jy ! Component: 400 - total flux cleaned = -0.00228263 Jy ! Component: 450 - total flux cleaned = -0.00232437 Jy ! Component: 500 - total flux cleaned = -0.00236565 Jy ! Component: 550 - total flux cleaned = -0.00236483 Jy ! Component: 600 - total flux cleaned = -0.00236419 Jy ! Component: 650 - total flux cleaned = -0.00252123 Jy ! Component: 700 - total flux cleaned = -0.00267593 Jy ! Component: 750 - total flux cleaned = -0.00279043 Jy ! Component: 800 - total flux cleaned = -0.00297789 Jy ! Component: 850 - total flux cleaned = -0.00305131 Jy ! Component: 900 - total flux cleaned = -0.0031616 Jy ! Component: 950 - total flux cleaned = -0.0032705 Jy ! Component: 1000 - total flux cleaned = -0.00341345 Jy ! Component: 1050 - total flux cleaned = -0.00355475 Jy ! Component: 1100 - total flux cleaned = -0.00376252 Jy ! Component: 1150 - total flux cleaned = -0.00362506 Jy ! Component: 1200 - total flux cleaned = -0.00369296 Jy ! Component: 1250 - total flux cleaned = -0.00365931 Jy ! Component: 1300 - total flux cleaned = -0.00375932 Jy ! Component: 1350 - total flux cleaned = -0.00379267 Jy ! Component: 1400 - total flux cleaned = -0.00379247 Jy ! Component: 1450 - total flux cleaned = -0.00385729 Jy ! Component: 1500 - total flux cleaned = -0.00395325 Jy ! Component: 1550 - total flux cleaned = -0.00395357 Jy ! Component: 1600 - total flux cleaned = -0.00385875 Jy ! Component: 1650 - total flux cleaned = -0.00388989 Jy ! Component: 1700 - total flux cleaned = -0.00392036 Jy ! Component: 1750 - total flux cleaned = -0.00392029 Jy ! Component: 1800 - total flux cleaned = -0.00398116 Jy ! Component: 1850 - total flux cleaned = -0.00395111 Jy ! Component: 1900 - total flux cleaned = -0.00407019 Jy ! Component: 1950 - total flux cleaned = -0.00404041 Jy ! Component: 2000 - total flux cleaned = -0.00418739 Jy ! Component: 2050 - total flux cleaned = -0.00418703 Jy ! Component: 2100 - total flux cleaned = -0.00430287 Jy ! Component: 2150 - total flux cleaned = -0.00430307 Jy ! Component: 2200 - total flux cleaned = -0.00436006 Jy ! Component: 2250 - total flux cleaned = -0.00441644 Jy ! Component: 2300 - total flux cleaned = -0.00438825 Jy ! Component: 2350 - total flux cleaned = -0.00447201 Jy ! Component: 2400 - total flux cleaned = -0.00447206 Jy ! Component: 2450 - total flux cleaned = -0.00441703 Jy ! Component: 2500 - total flux cleaned = -0.00444457 Jy ! Component: 2550 - total flux cleaned = -0.00447203 Jy ! Component: 2600 - total flux cleaned = -0.00455307 Jy ! Component: 2650 - total flux cleaned = -0.00457993 Jy ! Component: 2700 - total flux cleaned = -0.0045532 Jy ! Component: 2750 - total flux cleaned = -0.00460614 Jy ! Component: 2800 - total flux cleaned = -0.00465879 Jy ! Component: 2850 - total flux cleaned = -0.00460664 Jy ! Component: 2900 - total flux cleaned = -0.00471029 Jy ! Component: 2950 - total flux cleaned = -0.00473616 Jy ! Component: 3000 - total flux cleaned = -0.00473614 Jy ! Component: 3050 - total flux cleaned = -0.00476156 Jy ! Component: 3100 - total flux cleaned = -0.00483759 Jy ! Component: 3150 - total flux cleaned = -0.00498874 Jy ! Component: 3200 - total flux cleaned = -0.00506356 Jy ! Component: 3250 - total flux cleaned = -0.00506356 Jy ! Component: 3300 - total flux cleaned = -0.00513783 Jy ! Component: 3350 - total flux cleaned = -0.00526073 Jy ! Component: 3400 - total flux cleaned = -0.00526086 Jy ! Component: 3450 - total flux cleaned = -0.00543095 Jy ! Component: 3500 - total flux cleaned = -0.0053826 Jy ! Component: 3550 - total flux cleaned = -0.00543067 Jy ! Component: 3600 - total flux cleaned = -0.00559826 Jy ! Component: 3650 - total flux cleaned = -0.00562191 Jy ! Component: 3700 - total flux cleaned = -0.00564557 Jy ! Component: 3750 - total flux cleaned = -0.00585768 Jy ! Component: 3800 - total flux cleaned = -0.00588096 Jy ! Component: 3850 - total flux cleaned = -0.00592762 Jy ! Component: 3900 - total flux cleaned = -0.00602048 Jy ! Component: 3950 - total flux cleaned = -0.00608984 Jy ! Component: 4000 - total flux cleaned = -0.00613609 Jy ! Component: 4050 - total flux cleaned = -0.00631932 Jy ! Total flux subtracted in 4096 components = -0.00641048 Jy ! Clean residual min=-0.001324 max=0.001830 Jy/beam ! Clean residual mean=-0.000003 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.405115 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 535 components and 0.405116 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv73_uvs/J0534-3747_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.778 x 2.083 at -1.073 degrees (North through East) ! Clean map min=-0.0023498 max=0.25488 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv73_uvs/J0534-3747_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.2548 rms= 0.00037 Jy quit ! Quitting program ! Log file /scr/pima/rdv73_uvs/J0534-3747_X_uvs.log closed on Sat Jan 9 17:31:30 2016