! Started logfile: /scr/pima/rdv72_uvs/J2002+1501_S_uvs.log on Sat Oct  5 08:49:59 2013
obs /scr/pima/rdv72_uvs/J2002+1501_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv72_uvs/J2002+1501_S_uva.fits
! AN table 1: 31 integrations on 45 of 45 possible baselines.
! AN table 2: 10 integrations on 45 of 45 possible baselines.
! AN table 3: 14 integrations on 1 of 1 possible baselines.
! AN table 4: 5 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.76985 visibilities/baseline/integration-bin.
! Found source: J2002+1501
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09      1.6e+07          1      1.6e+07
!  02        2  2.26299e+09      1.6e+07          1      1.6e+07
!  03        3  2.35299e+09      1.6e+07          1      1.6e+07
!  04        4  2.37299e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5740 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J2002+1501_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  A total of 28 telescope corrections were flagged in sub-array 3.
!  A total of 10 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  A total of 28 telescope corrections were flagged in sub-array 3.
!  A total of 10 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  A total of 28 telescope corrections were flagged in sub-array 3.
!  A total of 10 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  A total of 28 telescope corrections were flagged in sub-array 3.
!  A total of 10 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.016704Jy  sigma=2.488478
! Fit after  self-cal, rms=0.872194Jy  sigma=2.107681
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.584 mas, bmaj=5.673 mas, bpa=-14.49 degrees
! Estimated noise=7.54378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106712 Jy
! Component: 100  -  total flux cleaned = 0.13568 Jy
! Total flux subtracted in 100 components = 0.13568 Jy
! Clean residual min=-0.007009 max=0.013502 Jy/beam
! Clean residual mean=-0.000005 rms=0.001878 Jy/beam
! Combined flux in latest and established models = 0.13568 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.13568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069342Jy  sigma=0.160046
! Fit after  self-cal, rms=0.069383Jy  sigma=0.159995
! Inverting map 
! Added new window around map position (2.5, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137372 Jy
! Component: 100  -  total flux cleaned = 0.0196122 Jy
! Total flux subtracted in 100 components = 0.0196122 Jy
! Clean residual min=-0.005786 max=0.007801 Jy/beam
! Clean residual mean=0.000001 rms=0.001509 Jy/beam
! Combined flux in latest and established models = 0.155292 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.155292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067486Jy  sigma=0.152787
! Fit after  self-cal, rms=0.067432Jy  sigma=0.152625
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.351 mas, bmaj=6.303 mas, bpa=-12.78 degrees
! Estimated noise=4.028 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533559 Jy
! Component: 100  -  total flux cleaned = 0.00657383 Jy
! Component: 150  -  total flux cleaned = 0.00729819 Jy
! Component: 200  -  total flux cleaned = 0.00770782 Jy
! Total flux subtracted in 200 components = 0.00770782 Jy
! Clean residual min=-0.004309 max=0.004667 Jy/beam
! Clean residual mean=0.000002 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.163 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 32 components and 0.163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067037Jy  sigma=0.151416
! Fit after  self-cal, rms=0.067005Jy  sigma=0.151281
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     KP        1.00     LA        1.06     
!   MK        0.92     NL        1.00     NY        1.33     OV        1.01     
!   PT        1.03     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.10     KK        0.82     KP        1.04     
!   LA        1.11     MK        0.92     NL        0.97     OV        0.96     
!   PT        1.03     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 3:
!   HO        0.00*    ZC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.07     KP        0.99     LA        0.99     
!   MK        1.01     NL        1.00     NY        1.11     OV        1.05     
!   PT        1.09     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     FD        1.11     KK        0.88     KP        1.02     
!   LA        1.01     MK        0.94     NL        0.94     OV        1.09     
!   PT        1.03     SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 3:
!   HO        0.00*    ZC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.06     KP        0.95     LA        0.93     
!   MK        1.01     NL        1.05     NY        1.15     OV        1.10     
!   PT        1.05     SC        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.10     FD        1.00     KK        0.84     KP        0.95     
!   LA        1.02     MK        1.02     NL        1.03     OV        1.14     
!   PT        1.11     SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 3:
!   HO        0.00*    ZC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.05     KP        0.88     LA        0.77     
!   MK        1.05     NL        0.99     NY        1.10     OV        0.90     
!   PT        0.94     SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.04     KK        0.80     KP        0.92     
!   LA        0.84     MK        1.01     NL        0.96     OV        0.94     
!   PT        0.94     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 3:
!   HO        0.00*    ZC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   NL        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.067005Jy  sigma=0.151281
! Fit after  self-cal, rms=0.064949Jy  sigma=0.144145
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.335 mas, bmaj=6.393 mas, bpa=-11.1 degrees
! Estimated noise=4.04303 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00079365 Jy
! Component: 100  -  total flux cleaned = -0.000740265 Jy
! Component: 150  -  total flux cleaned = -0.00064529 Jy
! Component: 200  -  total flux cleaned = -0.000560017 Jy
! Total flux subtracted in 200 components = -0.000560017 Jy
! Clean residual min=-0.002886 max=0.002859 Jy/beam
! Clean residual mean=0.000004 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.16244 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.16244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064828Jy  sigma=0.143967
! Fit after  self-cal, rms=0.064874Jy  sigma=0.143913
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064874Jy  sigma=0.143913
! Fit after  self-cal, rms=0.064999Jy  sigma=0.143871
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=6.415 mas, bpa=-10.87 degrees
! Estimated noise=4.03248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000822452 Jy
! Component: 100  -  total flux cleaned = -0.000776461 Jy
! Component: 150  -  total flux cleaned = -0.00070017 Jy
! Component: 200  -  total flux cleaned = -0.000570177 Jy
! Total flux subtracted in 200 components = -0.000570177 Jy
! Clean residual min=-0.002791 max=0.002750 Jy/beam
! Clean residual mean=0.000004 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.16187 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 41 components and 0.16187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064926Jy  sigma=0.143769
! Fit after  self-cal, rms=0.064925Jy  sigma=0.143766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.19342e-05 Jy
! Component: 100  -  total flux cleaned = 0.000142771 Jy
! Component: 150  -  total flux cleaned = 0.000166405 Jy
! Component: 200  -  total flux cleaned = 0.000188315 Jy
! Total flux subtracted in 200 components = 0.000188315 Jy
! Clean residual min=-0.002748 max=0.002715 Jy/beam
! Clean residual mean=0.000004 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.162058 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 48 components and 0.162058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064904Jy  sigma=0.143734
! Fit after  self-cal, rms=0.064902Jy  sigma=0.143732
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064902Jy  sigma=0.143732
! Fit after  self-cal, rms=0.065237Jy  sigma=0.143691
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.33 mas, bmaj=6.442 mas, bpa=-10.64 degrees
! Estimated noise=4.02921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000667476 Jy
! Component: 100  -  total flux cleaned = -0.000670422 Jy
! Component: 150  -  total flux cleaned = -0.000619565 Jy
! Component: 200  -  total flux cleaned = -0.000596256 Jy
! Total flux subtracted in 200 components = -0.000596256 Jy
! Clean residual min=-0.002636 max=0.002637 Jy/beam
! Clean residual mean=0.000004 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.161462 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.161462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065202Jy  sigma=0.143642
! Fit after  self-cal, rms=0.065205Jy  sigma=0.143640
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.17023e-05 Jy
! Component: 100  -  total flux cleaned = 5.88557e-05 Jy
! Component: 150  -  total flux cleaned = 7.59749e-05 Jy
! Component: 200  -  total flux cleaned = 9.17307e-05 Jy
! Total flux subtracted in 200 components = 9.17307e-05 Jy
! Clean residual min=-0.002614 max=0.002618 Jy/beam
! Clean residual mean=0.000004 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.161554 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.161554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065194Jy  sigma=0.143622
! Fit after  self-cal, rms=0.065193Jy  sigma=0.143621
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065193Jy  sigma=0.143621
! Fit after  self-cal, rms=0.065432Jy  sigma=0.143596
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.363 mas, bmaj=12.22 mas, bpa=-6.795 degrees
! Estimated noise=4.52488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000181915 Jy
! Component: 100  -  total flux cleaned = -0.000287402 Jy
! Component: 150  -  total flux cleaned = -0.000366662 Jy
! Component: 200  -  total flux cleaned = -0.00036576 Jy
! Total flux subtracted in 200 components = -0.00036576 Jy
! Clean residual min=-0.003341 max=0.002962 Jy/beam
! Clean residual mean=0.000005 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.161188 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 61 components and 0.161188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065438Jy  sigma=0.143603
! Fit after  self-cal, rms=0.065442Jy  sigma=0.143595
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120888 Jy
! Component: 100  -  total flux cleaned = -0.000105534 Jy
! Component: 150  -  total flux cleaned = -9.13687e-05 Jy
! Component: 200  -  total flux cleaned = -7.80483e-05 Jy
! Total flux subtracted in 200 components = -7.80483e-05 Jy
! Clean residual min=-0.003311 max=0.002912 Jy/beam
! Clean residual mean=0.000005 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.16111 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 63 components and 0.16111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065444Jy  sigma=0.143599
! Fit after  self-cal, rms=0.065444Jy  sigma=0.143596
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.329 mas, bmaj=6.465 mas, bpa=-10.53 degrees
! Estimated noise=4.02546 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.329 x 6.465 at -10.53 degrees (North through East)
! Clean map  min=-0.0025252  max=0.13291 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.546 mas, bmaj=5.825 mas, bpa=-13.28 degrees
! Estimated noise=7.4852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105721 Jy
! Component: 100  -  total flux cleaned = 0.132878 Jy
! Component: 150  -  total flux cleaned = 0.144089 Jy
! Component: 200  -  total flux cleaned = 0.150001 Jy
! Total flux subtracted in 200 components = 0.150001 Jy
! Clean residual min=-0.004490 max=0.005136 Jy/beam
! Clean residual mean=0.000002 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.150001 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.150001 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.329 mas, bmaj=6.465 mas, bpa=-10.53 degrees
! Estimated noise=4.02546 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00489194 Jy
! Component: 100  -  total flux cleaned = 0.00747198 Jy
! Component: 150  -  total flux cleaned = 0.00905256 Jy
! Component: 200  -  total flux cleaned = 0.00991541 Jy
! Total flux subtracted in 200 components = 0.00991541 Jy
! Clean residual min=-0.002596 max=0.002585 Jy/beam
! Clean residual mean=0.000004 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.159917 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 43 components and 0.159917 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.363 mas, bmaj=12.22 mas, bpa=-6.795 degrees
! Estimated noise=4.52488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000897357 Jy
! Component: 100  -  total flux cleaned = 0.0010343 Jy
! Component: 150  -  total flux cleaned = 0.00111424 Jy
! Component: 200  -  total flux cleaned = 0.00117507 Jy
! Total flux subtracted in 200 components = 0.00117507 Jy
! Clean residual min=-0.003260 max=0.002838 Jy/beam
! Clean residual mean=0.000005 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.161092 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.51685e-05 Jy
! Component: 100  -  total flux cleaned = 3.61066e-05 Jy
! Component: 150  -  total flux cleaned = 4.50983e-05 Jy
! Component: 200  -  total flux cleaned = 4.51327e-05 Jy
! Total flux subtracted in 200 components = 4.51327e-05 Jy
! Clean residual min=-0.003253 max=0.002854 Jy/beam
! Clean residual mean=0.000005 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.161137 Jy
! Adding 7 model components to the UV plane model.
! The established model now contains 49 components and 0.161137 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.329 mas, bmaj=6.465 mas, bpa=-10.53 degrees
! Estimated noise=4.02546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000233473 Jy
! Component: 100  -  total flux cleaned = -0.000196299 Jy
! Component: 150  -  total flux cleaned = -0.000151734 Jy
! Component: 200  -  total flux cleaned = -0.000132164 Jy
! Total flux subtracted in 200 components = -0.000132164 Jy
! Clean residual min=-0.002559 max=0.002527 Jy/beam
! Clean residual mean=0.000003 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.161005 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 54 components and 0.161005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065440Jy  sigma=0.143549
! Fit after  self-cal, rms=0.065425Jy  sigma=0.143538
wmodel /scr/pima/rdv72_uvs/J2002+1501_S_map.mod
! Writing 54 model components to file: /scr/pima/rdv72_uvs/J2002+1501_S_map.mod
wobs /scr/pima/rdv72_uvs/J2002+1501_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv72_uvs/J2002+1501_S_uvs.fits
wwins /scr/pima/rdv72_uvs/J2002+1501_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rdv72_uvs/J2002+1501_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 7.99489e-05 Jy
! Component: 100  -  total flux cleaned = 0.000293966 Jy
! Component: 150  -  total flux cleaned = 0.000375089 Jy
! Component: 200  -  total flux cleaned = 0.000375088 Jy
! Component: 250  -  total flux cleaned = 0.000265733 Jy
! Component: 300  -  total flux cleaned = 8.89614e-05 Jy
! Component: 350  -  total flux cleaned = -0.000148789 Jy
! Component: 400  -  total flux cleaned = -0.000412303 Jy
! Component: 450  -  total flux cleaned = -0.000604273 Jy
! Component: 500  -  total flux cleaned = -0.000729582 Jy
! Component: 550  -  total flux cleaned = -0.0008519 Jy
! Component: 600  -  total flux cleaned = -0.000972005 Jy
! Component: 650  -  total flux cleaned = -0.00108998 Jy
! Component: 700  -  total flux cleaned = -0.00123414 Jy
! Component: 750  -  total flux cleaned = -0.00131871 Jy
! Component: 800  -  total flux cleaned = -0.00129104 Jy
! Component: 850  -  total flux cleaned = -0.0013185 Jy
! Component: 900  -  total flux cleaned = -0.00123767 Jy
! Component: 950  -  total flux cleaned = -0.00123798 Jy
! Component: 1000  -  total flux cleaned = -0.0010549 Jy
! Component: 1050  -  total flux cleaned = -0.00113292 Jy
! Component: 1100  -  total flux cleaned = -0.00113264 Jy
! Component: 1150  -  total flux cleaned = -0.00108203 Jy
! Component: 1200  -  total flux cleaned = -0.0010072 Jy
! Component: 1250  -  total flux cleaned = -0.00108134 Jy
! Component: 1300  -  total flux cleaned = -0.0009834 Jy
! Component: 1350  -  total flux cleaned = -0.000983706 Jy
! Component: 1400  -  total flux cleaned = -0.000888099 Jy
! Component: 1450  -  total flux cleaned = -0.000911952 Jy
! Component: 1500  -  total flux cleaned = -0.000865414 Jy
! Component: 1550  -  total flux cleaned = -0.000796345 Jy
! Component: 1600  -  total flux cleaned = -0.000681953 Jy
! Component: 1650  -  total flux cleaned = -0.000682067 Jy
! Component: 1700  -  total flux cleaned = -0.000659416 Jy
! Component: 1750  -  total flux cleaned = -0.000637195 Jy
! Component: 1800  -  total flux cleaned = -0.000571179 Jy
! Component: 1850  -  total flux cleaned = -0.000571496 Jy
! Component: 1900  -  total flux cleaned = -0.000419852 Jy
! Component: 1950  -  total flux cleaned = -0.000376951 Jy
! Component: 2000  -  total flux cleaned = -0.000270614 Jy
! Component: 2050  -  total flux cleaned = -0.000186264 Jy
! Component: 2100  -  total flux cleaned = -8.20727e-05 Jy
! Component: 2150  -  total flux cleaned = 4.18621e-05 Jy
! Component: 2200  -  total flux cleaned = 6.25661e-05 Jy
! Component: 2250  -  total flux cleaned = 0.000184942 Jy
! Component: 2300  -  total flux cleaned = 0.0003061 Jy
! Component: 2350  -  total flux cleaned = 0.000386238 Jy
! Component: 2400  -  total flux cleaned = 0.000465643 Jy
! Component: 2450  -  total flux cleaned = 0.000524603 Jy
! Component: 2500  -  total flux cleaned = 0.000583443 Jy
! Component: 2550  -  total flux cleaned = 0.00058348 Jy
! Component: 2600  -  total flux cleaned = 0.000660579 Jy
! Component: 2650  -  total flux cleaned = 0.000717871 Jy
! Component: 2700  -  total flux cleaned = 0.000793787 Jy
! Component: 2750  -  total flux cleaned = 0.000812467 Jy
! Component: 2800  -  total flux cleaned = 0.000812521 Jy
! Component: 2850  -  total flux cleaned = 0.000942641 Jy
! Component: 2900  -  total flux cleaned = 0.000942783 Jy
! Component: 2950  -  total flux cleaned = 0.0010163 Jy
! Component: 3000  -  total flux cleaned = 0.0011075 Jy
! Component: 3050  -  total flux cleaned = 0.00110758 Jy
! Component: 3100  -  total flux cleaned = 0.00108955 Jy
! Component: 3150  -  total flux cleaned = 0.00116113 Jy
! Component: 3200  -  total flux cleaned = 0.00119659 Jy
! Component: 3250  -  total flux cleaned = 0.00130255 Jy
! Component: 3300  -  total flux cleaned = 0.00130243 Jy
! Component: 3350  -  total flux cleaned = 0.0012848 Jy
! Component: 3400  -  total flux cleaned = 0.00135415 Jy
! Component: 3450  -  total flux cleaned = 0.00133683 Jy
! Component: 3500  -  total flux cleaned = 0.00135407 Jy
! Component: 3550  -  total flux cleaned = 0.00142212 Jy
! Component: 3600  -  total flux cleaned = 0.00140517 Jy
! Component: 3650  -  total flux cleaned = 0.00145573 Jy
! Component: 3700  -  total flux cleaned = 0.00152272 Jy
! Component: 3750  -  total flux cleaned = 0.00155594 Jy
! Component: 3800  -  total flux cleaned = 0.00153918 Jy
! Component: 3850  -  total flux cleaned = 0.00158869 Jy
! Component: 3900  -  total flux cleaned = 0.00165426 Jy
! Component: 3950  -  total flux cleaned = 0.00168693 Jy
! Component: 4000  -  total flux cleaned = 0.00162201 Jy
! Component: 4050  -  total flux cleaned = 0.00168673 Jy
! Total flux subtracted in 4096 components = 0.00171882 Jy
! Clean residual min=-0.000968 max=0.000845 Jy/beam
! Clean residual mean=0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.162723 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 347 components and 0.162723 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv72_uvs/J2002+1501_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.329 x 6.465 at -10.53 degrees (North through East)
! Clean map  min=-0.0018677  max=0.13304 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J2002+1501_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.13304 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000287547 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.648409 0.648409 1.29682 2.59364 5.18728 10.3746 20.7491 41.4982 82.9964
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.133 
quit
! Quitting program
! Log file /scr/pima/rdv72_uvs/J2002+1501_S_uvs.log closed on Sat Oct  5 08:50:04 2013