! Started logfile: /scr/pima/rdv72_uvs/J1859-2509_S_uvs.log on Sat Oct 5 08:49:32 2013 obs /scr/pima/rdv72_uvs/J1859-2509_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J1859-2509_S_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! AN table 2: 24 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.831502 visibilities/baseline/integration-bin. ! Found source: J1859-2509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7264 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J1859-2509_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.015878Jy sigma=1.629807 ! Fit after self-cal, rms=0.877790Jy sigma=1.395421 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=4.815 mas, bpa=-17.82 degrees ! Estimated noise=11.8606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0986468 Jy ! Component: 100 - total flux cleaned = 0.126342 Jy ! Total flux subtracted in 100 components = 0.126342 Jy ! Clean residual min=-0.009631 max=0.012883 Jy/beam ! Clean residual mean=0.000112 rms=0.002772 Jy/beam ! Combined flux in latest and established models = 0.126342 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.126342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111607Jy sigma=0.150238 ! Fit after self-cal, rms=0.111670Jy sigma=0.150198 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.984 mas, bmaj=7.316 mas, bpa=-11.75 degrees ! Estimated noise=5.58644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145002 Jy ! Component: 100 - total flux cleaned = 0.0203812 Jy ! Component: 150 - total flux cleaned = 0.0228801 Jy ! Component: 200 - total flux cleaned = 0.0237022 Jy ! Total flux subtracted in 200 components = 0.0237022 Jy ! Clean residual min=-0.007974 max=0.006485 Jy/beam ! Clean residual mean=0.000065 rms=0.001913 Jy/beam ! Combined flux in latest and established models = 0.150044 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 28 components and 0.150044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110027Jy sigma=0.147232 ! Fit after self-cal, rms=0.110103Jy sigma=0.147227 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.03 KP 0.97 LA 1.10 ! MK 1.02 NL 1.02 OV 0.99 PT 1.05 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.29 FD 1.06 HO 1.03 KK 0.77 ! KP 1.02 LA 1.13 MK 0.92 NL 0.95 ! OV 1.02 PT 1.11 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.09 KP 1.07 LA 1.01 ! MK 0.95 NL 1.03 OV 1.01 PT 1.06 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.31 FD 1.14 HO 0.97 KK 0.82 ! KP 0.99 LA 0.95 MK 0.98 NL 1.08 ! OV 1.09 PT 1.04 SC 1.15 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 1.11 KP 0.98 LA 0.94 ! MK 1.08 NL 1.06 OV 1.10 PT 1.10 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.38 FD 1.10 HO 0.83 KK 0.79 ! KP 1.01 LA 0.90 MK 0.93 NL 1.12 ! OV 1.15 PT 1.14 SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.31 FD 1.09 KP 1.02 LA 0.79 ! MK 1.14 NL 0.97 OV 0.92 PT 0.93 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.26 FD 1.09 HO 0.86 KK 0.79 ! KP 0.95 LA 0.79 MK 1.00 NL 0.98 ! OV 0.90 PT 1.01 SC 0.99 ! ! ! Fit before self-cal, rms=0.110103Jy sigma=0.147227 ! Fit after self-cal, rms=0.083005Jy sigma=0.124828 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=7.02 mas, bpa=-12.38 degrees ! Estimated noise=5.54901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565469 Jy ! Component: 100 - total flux cleaned = 0.000608079 Jy ! Component: 150 - total flux cleaned = 0.000675768 Jy ! Component: 200 - total flux cleaned = 0.0007027 Jy ! Total flux subtracted in 200 components = 0.0007027 Jy ! Clean residual min=-0.002381 max=0.002991 Jy/beam ! Clean residual mean=0.000005 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.150747 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.150747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082939Jy sigma=0.124803 ! Fit after self-cal, rms=0.083600Jy sigma=0.123546 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083600Jy sigma=0.123546 ! Fit after self-cal, rms=0.083599Jy sigma=0.123429 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.914 mas, bmaj=7.006 mas, bpa=-12.64 degrees ! Estimated noise=5.54758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420917 Jy ! Component: 100 - total flux cleaned = 0.000481258 Jy ! Component: 150 - total flux cleaned = 0.000505706 Jy ! Component: 200 - total flux cleaned = 0.000544606 Jy ! Total flux subtracted in 200 components = 0.000544606 Jy ! Clean residual min=-0.002432 max=0.003031 Jy/beam ! Clean residual mean=0.000002 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.151292 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.151292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083556Jy sigma=0.123421 ! Fit after self-cal, rms=0.083660Jy sigma=0.123409 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (88.5, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202921 Jy ! Component: 100 - total flux cleaned = 0.00207079 Jy ! Component: 150 - total flux cleaned = 0.00214236 Jy ! Component: 200 - total flux cleaned = 0.00223362 Jy ! Total flux subtracted in 200 components = 0.00223362 Jy ! Clean residual min=-0.002406 max=0.002376 Jy/beam ! Clean residual mean=-0.000002 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.153525 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.153525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083572Jy sigma=0.123249 ! Fit after self-cal, rms=0.083580Jy sigma=0.123239 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083580Jy sigma=0.123239 ! Fit after self-cal, rms=0.083511Jy sigma=0.123220 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=6.986 mas, bpa=-12.82 degrees ! Estimated noise=5.55252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507429 Jy ! Component: 100 - total flux cleaned = 0.000589131 Jy ! Component: 150 - total flux cleaned = 0.000613989 Jy ! Component: 200 - total flux cleaned = 0.00066095 Jy ! Total flux subtracted in 200 components = 0.00066095 Jy ! Clean residual min=-0.002387 max=0.002373 Jy/beam ! Clean residual mean=-0.000002 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.154186 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.154186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083490Jy sigma=0.123188 ! Fit after self-cal, rms=0.083508Jy sigma=0.123186 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.56806e-05 Jy ! Component: 100 - total flux cleaned = 7.45169e-05 Jy ! Component: 150 - total flux cleaned = 5.45473e-05 Jy ! Component: 200 - total flux cleaned = 5.46424e-05 Jy ! Total flux subtracted in 200 components = 5.46424e-05 Jy ! Clean residual min=-0.002405 max=0.002344 Jy/beam ! Clean residual mean=-0.000001 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.154241 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.154241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083495Jy sigma=0.123171 ! Fit after self-cal, rms=0.083495Jy sigma=0.123171 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083495Jy sigma=0.123171 ! Fit after self-cal, rms=0.083580Jy sigma=0.123156 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.569 mas, bmaj=21.9 mas, bpa=-1.864 degrees ! Estimated noise=5.7084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191293 Jy ! Component: 100 - total flux cleaned = -0.000191342 Jy ! Component: 150 - total flux cleaned = -0.000220411 Jy ! Component: 200 - total flux cleaned = -0.00023434 Jy ! Total flux subtracted in 200 components = -0.00023434 Jy ! Clean residual min=-0.002469 max=0.002346 Jy/beam ! Clean residual mean=-0.000003 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.154006 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.154006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083580Jy sigma=0.123137 ! Fit after self-cal, rms=0.083583Jy sigma=0.123136 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.01247e-07 Jy ! Component: 100 - total flux cleaned = -2.40916e-05 Jy ! Component: 150 - total flux cleaned = -4.75363e-05 Jy ! Component: 200 - total flux cleaned = -7.03235e-05 Jy ! Total flux subtracted in 200 components = -7.03235e-05 Jy ! Clean residual min=-0.002455 max=0.002333 Jy/beam ! Clean residual mean=-0.000003 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.153936 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.153936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083583Jy sigma=0.123126 ! Fit after self-cal, rms=0.083583Jy sigma=0.123126 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=6.976 mas, bpa=-12.92 degrees ! Estimated noise=5.56362 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 6.976 at -12.92 degrees (North through East) ! Clean map min=-0.0023764 max=0.12635 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=4.642 mas, bpa=-19.98 degrees ! Estimated noise=11.5291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0954292 Jy ! Component: 100 - total flux cleaned = 0.122811 Jy ! Component: 150 - total flux cleaned = 0.136312 Jy ! Component: 200 - total flux cleaned = 0.143238 Jy ! Total flux subtracted in 200 components = 0.143238 Jy ! Clean residual min=-0.005080 max=0.004388 Jy/beam ! Clean residual mean=-0.000001 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.143238 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.143238 Jy ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=6.976 mas, bpa=-12.92 degrees ! Estimated noise=5.56362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00548344 Jy ! Component: 100 - total flux cleaned = 0.00821495 Jy ! Component: 150 - total flux cleaned = 0.00900513 Jy ! Component: 200 - total flux cleaned = 0.00927592 Jy ! Total flux subtracted in 200 components = 0.00927592 Jy ! Clean residual min=-0.002475 max=0.002492 Jy/beam ! Clean residual mean=-0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.152514 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 34 components and 0.152514 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.569 mas, bmaj=21.9 mas, bpa=-1.864 degrees ! Estimated noise=5.7084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330601 Jy ! Component: 100 - total flux cleaned = 0.000579865 Jy ! Component: 150 - total flux cleaned = 0.000770759 Jy ! Component: 200 - total flux cleaned = 0.000830563 Jy ! Total flux subtracted in 200 components = 0.000830563 Jy ! Clean residual min=-0.002555 max=0.002409 Jy/beam ! Clean residual mean=-0.000005 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.153344 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.639e-05 Jy ! Component: 100 - total flux cleaned = -1.49818e-05 Jy ! Component: 150 - total flux cleaned = -4.42419e-05 Jy ! Component: 200 - total flux cleaned = -5.7388e-05 Jy ! Total flux subtracted in 200 components = -5.7388e-05 Jy ! Clean residual min=-0.002532 max=0.002401 Jy/beam ! Clean residual mean=-0.000004 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.153287 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 55 components and 0.153287 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=6.976 mas, bpa=-12.92 degrees ! Estimated noise=5.56362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013561 Jy ! Component: 100 - total flux cleaned = 0.000301757 Jy ! Component: 150 - total flux cleaned = 0.000326131 Jy ! Component: 200 - total flux cleaned = 0.000301692 Jy ! Total flux subtracted in 200 components = 0.000301692 Jy ! Clean residual min=-0.002441 max=0.002428 Jy/beam ! Clean residual mean=-0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.153589 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.153589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083568Jy sigma=0.123146 ! Fit after self-cal, rms=0.083589Jy sigma=0.123142 wmodel /scr/pima/rdv72_uvs/J1859-2509_S_map.mod ! Writing 65 model components to file: /scr/pima/rdv72_uvs/J1859-2509_S_map.mod wobs /scr/pima/rdv72_uvs/J1859-2509_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J1859-2509_S_uvs.fits wwins /scr/pima/rdv72_uvs/J1859-2509_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv72_uvs/J1859-2509_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.07191e-05 Jy ! Component: 100 - total flux cleaned = -2.22452e-05 Jy ! Component: 150 - total flux cleaned = 0.000123478 Jy ! Component: 200 - total flux cleaned = 0.000401372 Jy ! Component: 250 - total flux cleaned = 0.000766244 Jy ! Component: 300 - total flux cleaned = 0.00108633 Jy ! Component: 350 - total flux cleaned = 0.0013965 Jy ! Component: 400 - total flux cleaned = 0.00157782 Jy ! Component: 450 - total flux cleaned = 0.00187186 Jy ! Component: 500 - total flux cleaned = 0.00218605 Jy ! Component: 550 - total flux cleaned = 0.00240907 Jy ! Component: 600 - total flux cleaned = 0.00260086 Jy ! Component: 650 - total flux cleaned = 0.00281512 Jy ! Component: 700 - total flux cleaned = 0.00299869 Jy ! Component: 750 - total flux cleaned = 0.00315363 Jy ! Component: 800 - total flux cleaned = 0.00338346 Jy ! Component: 850 - total flux cleaned = 0.00366002 Jy ! Component: 900 - total flux cleaned = 0.00383378 Jy ! Component: 950 - total flux cleaned = 0.00417701 Jy ! Component: 1000 - total flux cleaned = 0.00439473 Jy ! Component: 1050 - total flux cleaned = 0.00470542 Jy ! Component: 1100 - total flux cleaned = 0.00494155 Jy ! Component: 1150 - total flux cleaned = 0.00508138 Jy ! Component: 1200 - total flux cleaned = 0.00528929 Jy ! Component: 1250 - total flux cleaned = 0.00551743 Jy ! Component: 1300 - total flux cleaned = 0.00578799 Jy ! Component: 1350 - total flux cleaned = 0.00592203 Jy ! Component: 1400 - total flux cleaned = 0.00618704 Jy ! Component: 1450 - total flux cleaned = 0.0063838 Jy ! Component: 1500 - total flux cleaned = 0.00657861 Jy ! Component: 1550 - total flux cleaned = 0.00681423 Jy ! Component: 1600 - total flux cleaned = 0.00700465 Jy ! Component: 1650 - total flux cleaned = 0.00710954 Jy ! Component: 1700 - total flux cleaned = 0.00731727 Jy ! Component: 1750 - total flux cleaned = 0.00752279 Jy ! Component: 1800 - total flux cleaned = 0.00766535 Jy ! Component: 1850 - total flux cleaned = 0.00788744 Jy ! Component: 1900 - total flux cleaned = 0.00806733 Jy ! Component: 1950 - total flux cleaned = 0.00818633 Jy ! Component: 2000 - total flux cleaned = 0.00842213 Jy ! Component: 2050 - total flux cleaned = 0.00859737 Jy ! Component: 2100 - total flux cleaned = 0.00879059 Jy ! Component: 2150 - total flux cleaned = 0.00900109 Jy ! Component: 2200 - total flux cleaned = 0.00922898 Jy ! Component: 2250 - total flux cleaned = 0.00941716 Jy ! Component: 2300 - total flux cleaned = 0.00962268 Jy ! Component: 2350 - total flux cleaned = 0.00977113 Jy ! Component: 2400 - total flux cleaned = 0.00993662 Jy ! Component: 2450 - total flux cleaned = 0.01001 Jy ! Component: 2500 - total flux cleaned = 0.0102642 Jy ! Component: 2550 - total flux cleaned = 0.0104443 Jy ! Component: 2600 - total flux cleaned = 0.0105696 Jy ! Component: 2650 - total flux cleaned = 0.0107474 Jy ! Component: 2700 - total flux cleaned = 0.0109239 Jy ! Component: 2750 - total flux cleaned = 0.0110643 Jy ! Component: 2800 - total flux cleaned = 0.011273 Jy ! Component: 2850 - total flux cleaned = 0.0113422 Jy ! Component: 2900 - total flux cleaned = 0.0114625 Jy ! Component: 2950 - total flux cleaned = 0.0116161 Jy ! Component: 3000 - total flux cleaned = 0.0117352 Jy ! Component: 3050 - total flux cleaned = 0.0119035 Jy ! Component: 3100 - total flux cleaned = 0.0120208 Jy ! Component: 3150 - total flux cleaned = 0.0122536 Jy ! Component: 3200 - total flux cleaned = 0.0123692 Jy ! Component: 3250 - total flux cleaned = 0.0124843 Jy ! Component: 3300 - total flux cleaned = 0.0125987 Jy ! Component: 3350 - total flux cleaned = 0.0126961 Jy ! Component: 3400 - total flux cleaned = 0.0128739 Jy ! Component: 3450 - total flux cleaned = 0.0130186 Jy ! Component: 3500 - total flux cleaned = 0.0131145 Jy ! Component: 3550 - total flux cleaned = 0.0132258 Jy ! Component: 3600 - total flux cleaned = 0.0133996 Jy ! Component: 3650 - total flux cleaned = 0.013494 Jy ! Component: 3700 - total flux cleaned = 0.0136192 Jy ! Component: 3750 - total flux cleaned = 0.0137435 Jy ! Component: 3800 - total flux cleaned = 0.0139293 Jy ! Component: 3850 - total flux cleaned = 0.0140371 Jy ! Component: 3900 - total flux cleaned = 0.0140984 Jy ! Component: 3950 - total flux cleaned = 0.0142814 Jy ! Component: 4000 - total flux cleaned = 0.014418 Jy ! Component: 4050 - total flux cleaned = 0.014554 Jy ! Total flux subtracted in 4096 components = 0.0147346 Jy ! Clean residual min=-0.000754 max=0.000971 Jy/beam ! Clean residual mean=0.000007 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.168323 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 318 components and 0.168323 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J1859-2509_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 6.976 at -12.92 degrees (North through East) ! Clean map min=-0.0017034 max=0.1287 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J1859-2509_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128699 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000261481 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.60952 0.60952 1.21904 2.43808 4.87616 9.75232 19.5046 39.0093 78.0186 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.128 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J1859-2509_S_uvs.log closed on Sat Oct 5 08:49:36 2013