! Started logfile: /scr/pima/rdv72_uvs/J1505-3432_S_uvs.log on Sat Oct 5 08:48:16 2013 obs /scr/pima/rdv72_uvs/J1505-3432_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J1505-3432_S_uva.fits ! AN table 1: 23 integrations on 28 of 28 possible baselines. ! AN table 2: 23 integrations on 55 of 55 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1505-3432 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7636 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J1505-3432_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.021428Jy sigma=1.696249 ! Fit after self-cal, rms=0.865364Jy sigma=1.425106 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.671 mas, bmaj=3.051 mas, bpa=-46.2 degrees ! Estimated noise=10.3646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109717 Jy ! Component: 100 - total flux cleaned = 0.128757 Jy ! Total flux subtracted in 100 components = 0.128757 Jy ! Clean residual min=-0.010517 max=0.012223 Jy/beam ! Clean residual mean=0.000015 rms=0.002292 Jy/beam ! Combined flux in latest and established models = 0.128757 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.128757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099326Jy sigma=0.150770 ! Fit after self-cal, rms=0.099298Jy sigma=0.150718 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=4.035 mas, bpa=-33.84 degrees ! Estimated noise=5.0397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114405 Jy ! Component: 100 - total flux cleaned = 0.014606 Jy ! Component: 150 - total flux cleaned = 0.0149196 Jy ! Component: 200 - total flux cleaned = 0.0152071 Jy ! Total flux subtracted in 200 components = 0.0152071 Jy ! Clean residual min=-0.005970 max=0.006249 Jy/beam ! Clean residual mean=0.000049 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.143964 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.143964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098223Jy sigma=0.147853 ! Fit after self-cal, rms=0.098289Jy sigma=0.147840 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 1.18 LA 1.00 MK 0.92 ! NL 0.92 OV 0.90 PT 1.01 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 0.99 HO 0.83 KK 0.81 ! KP 1.16 LA 1.02 MK 0.89 NL 0.97 ! OV 1.00 PT 1.07 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 1.12 LA 0.94 MK 1.01 ! NL 0.99 OV 0.96 PT 1.03 SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.09 HO 0.96 KK 0.78 ! KP 1.20 LA 0.96 MK 0.90 NL 1.14 ! OV 1.05 PT 1.02 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 KP 1.12 LA 0.82 MK 0.98 ! NL 1.07 OV 1.05 PT 1.07 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.25 FD 1.11 HO 0.80 KK 0.81 ! KP 1.11 LA 0.91 MK 0.93 NL 1.21 ! OV 1.05 PT 1.01 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 KP 1.05 LA 0.78 MK 1.18 ! NL 0.98 OV 0.88 PT 0.88 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.41 FD 0.98 HO 1.01 KK 0.81 ! KP 1.12 LA 0.73 MK 1.05 NL 1.06 ! OV 0.85 PT 0.91 SC 1.03 ! ! ! Fit before self-cal, rms=0.098289Jy sigma=0.147840 ! Fit after self-cal, rms=0.094921Jy sigma=0.142021 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=3.956 mas, bpa=-35.66 degrees ! Estimated noise=4.93101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354602 Jy ! Component: 100 - total flux cleaned = 0.00336996 Jy ! Component: 150 - total flux cleaned = 0.00323109 Jy ! Component: 200 - total flux cleaned = 0.00323276 Jy ! Total flux subtracted in 200 components = 0.00323276 Jy ! Clean residual min=-0.003744 max=0.002970 Jy/beam ! Clean residual mean=0.000028 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.147197 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.147197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094672Jy sigma=0.141679 ! Fit after self-cal, rms=0.094946Jy sigma=0.141562 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094946Jy sigma=0.141562 ! Fit after self-cal, rms=0.095199Jy sigma=0.141500 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=3.948 mas, bpa=-35.45 degrees ! Estimated noise=4.93738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145572 Jy ! Component: 100 - total flux cleaned = 0.00145551 Jy ! Component: 150 - total flux cleaned = 0.00141268 Jy ! Component: 200 - total flux cleaned = 0.00137527 Jy ! Total flux subtracted in 200 components = 0.00137527 Jy ! Clean residual min=-0.003666 max=0.002888 Jy/beam ! Clean residual mean=0.000017 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.148572 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.148572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095115Jy sigma=0.141400 ! Fit after self-cal, rms=0.095147Jy sigma=0.141395 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.32887e-05 Jy ! Component: 100 - total flux cleaned = 9.24301e-05 Jy ! Component: 150 - total flux cleaned = 9.18866e-05 Jy ! Component: 200 - total flux cleaned = 0.000121526 Jy ! Total flux subtracted in 200 components = 0.000121526 Jy ! Clean residual min=-0.003675 max=0.002852 Jy/beam ! Clean residual mean=0.000017 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.148694 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.148694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095118Jy sigma=0.141365 ! Fit after self-cal, rms=0.095125Jy sigma=0.141364 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095125Jy sigma=0.141364 ! Fit after self-cal, rms=0.095153Jy sigma=0.141338 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.372 mas, bmaj=3.944 mas, bpa=-35.33 degrees ! Estimated noise=4.93886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473542 Jy ! Component: 100 - total flux cleaned = 0.000535178 Jy ! Component: 150 - total flux cleaned = 0.00053576 Jy ! Component: 200 - total flux cleaned = 0.000536036 Jy ! Total flux subtracted in 200 components = 0.000536036 Jy ! Clean residual min=-0.003626 max=0.002829 Jy/beam ! Clean residual mean=0.000011 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.14923 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.14923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095129Jy sigma=0.141309 ! Fit after self-cal, rms=0.095141Jy sigma=0.141308 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.63903e-05 Jy ! Component: 100 - total flux cleaned = 5.01979e-05 Jy ! Component: 150 - total flux cleaned = 5.06462e-05 Jy ! Component: 200 - total flux cleaned = 7.17282e-05 Jy ! Total flux subtracted in 200 components = 7.17282e-05 Jy ! Clean residual min=-0.003625 max=0.002811 Jy/beam ! Clean residual mean=0.000011 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.149301 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.149301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095128Jy sigma=0.141293 ! Fit after self-cal, rms=0.095131Jy sigma=0.141293 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095131Jy sigma=0.141293 ! Fit after self-cal, rms=0.095170Jy sigma=0.141282 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.585 mas, bmaj=24.46 mas, bpa=-1.889 degrees ! Estimated noise=6.61105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385295 Jy ! Component: 100 - total flux cleaned = 0.00040876 Jy ! Component: 150 - total flux cleaned = 0.000439288 Jy ! Component: 200 - total flux cleaned = 0.000458052 Jy ! Total flux subtracted in 200 components = 0.000458052 Jy ! Clean residual min=-0.003114 max=0.002486 Jy/beam ! Clean residual mean=0.000020 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.149759 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.149759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095171Jy sigma=0.141284 ! Fit after self-cal, rms=0.095174Jy sigma=0.141282 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115559 Jy ! Component: 100 - total flux cleaned = 0.000124901 Jy ! Component: 150 - total flux cleaned = 0.000124734 Jy ! Component: 200 - total flux cleaned = 0.000132793 Jy ! Total flux subtracted in 200 components = 0.000132793 Jy ! Clean residual min=-0.003095 max=0.002503 Jy/beam ! Clean residual mean=0.000020 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.149892 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.149892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095176Jy sigma=0.141283 ! Fit after self-cal, rms=0.095175Jy sigma=0.141282 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.372 mas, bmaj=3.943 mas, bpa=-35.2 degrees ! Estimated noise=4.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.372 x 3.943 at -35.2 degrees (North through East) ! Clean map min=-0.0032454 max=0.14266 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.642 mas, bmaj=3.008 mas, bpa=-47.29 degrees ! Estimated noise=9.84425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104042 Jy ! Component: 100 - total flux cleaned = 0.128417 Jy ! Component: 150 - total flux cleaned = 0.136607 Jy ! Component: 200 - total flux cleaned = 0.138728 Jy ! Total flux subtracted in 200 components = 0.138728 Jy ! Clean residual min=-0.006910 max=0.006785 Jy/beam ! Clean residual mean=0.000007 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.138728 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.138728 Jy ! Inverting map and beam ! Estimated beam: bmin=2.372 mas, bmaj=3.943 mas, bpa=-35.2 degrees ! Estimated noise=4.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708882 Jy ! Component: 100 - total flux cleaned = 0.0101949 Jy ! Component: 150 - total flux cleaned = 0.0105104 Jy ! Component: 200 - total flux cleaned = 0.0105131 Jy ! Total flux subtracted in 200 components = 0.0105131 Jy ! Clean residual min=-0.003489 max=0.002889 Jy/beam ! Clean residual mean=0.000008 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.149241 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.149241 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.585 mas, bmaj=24.46 mas, bpa=-1.889 degrees ! Estimated noise=6.61105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401405 Jy ! Component: 100 - total flux cleaned = 0.000402339 Jy ! Component: 150 - total flux cleaned = 0.000425039 Jy ! Component: 200 - total flux cleaned = 0.000444526 Jy ! Total flux subtracted in 200 components = 0.000444526 Jy ! Clean residual min=-0.003123 max=0.002520 Jy/beam ! Clean residual mean=0.000020 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.149686 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.57093e-05 Jy ! Component: 100 - total flux cleaned = 6.75059e-05 Jy ! Component: 150 - total flux cleaned = 9.67714e-05 Jy ! Component: 200 - total flux cleaned = 0.000123481 Jy ! Total flux subtracted in 200 components = 0.000123481 Jy ! Clean residual min=-0.003117 max=0.002523 Jy/beam ! Clean residual mean=0.000020 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.149809 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.149809 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.372 mas, bmaj=3.943 mas, bpa=-35.2 degrees ! Estimated noise=4.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033317 Jy ! Component: 100 - total flux cleaned = -0.000335023 Jy ! Component: 150 - total flux cleaned = -0.000383741 Jy ! Component: 200 - total flux cleaned = -0.000383927 Jy ! Total flux subtracted in 200 components = -0.000383927 Jy ! Clean residual min=-0.003506 max=0.002822 Jy/beam ! Clean residual mean=0.000008 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.149425 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.149425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095197Jy sigma=0.141392 ! Fit after self-cal, rms=0.095177Jy sigma=0.141381 wmodel /scr/pima/rdv72_uvs/J1505-3432_S_map.mod ! Writing 45 model components to file: /scr/pima/rdv72_uvs/J1505-3432_S_map.mod wobs /scr/pima/rdv72_uvs/J1505-3432_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J1505-3432_S_uvs.fits wwins /scr/pima/rdv72_uvs/J1505-3432_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv72_uvs/J1505-3432_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000548126 Jy ! Component: 100 - total flux cleaned = -0.000398459 Jy ! Component: 150 - total flux cleaned = -0.000158963 Jy ! Component: 200 - total flux cleaned = -0.000250247 Jy ! Component: 250 - total flux cleaned = -0.000426387 Jy ! Component: 300 - total flux cleaned = -0.000683052 Jy ! Component: 350 - total flux cleaned = -0.000891226 Jy ! Component: 400 - total flux cleaned = -0.00109453 Jy ! Component: 450 - total flux cleaned = -0.00121382 Jy ! Component: 500 - total flux cleaned = -0.00117463 Jy ! Component: 550 - total flux cleaned = -0.00117529 Jy ! Component: 600 - total flux cleaned = -0.00117555 Jy ! Component: 650 - total flux cleaned = -0.00117544 Jy ! Component: 700 - total flux cleaned = -0.00121179 Jy ! Component: 750 - total flux cleaned = -0.00114 Jy ! Component: 800 - total flux cleaned = -0.000963604 Jy ! Component: 850 - total flux cleaned = -0.00092925 Jy ! Component: 900 - total flux cleaned = -0.000963475 Jy ! Component: 950 - total flux cleaned = -0.000725239 Jy ! Component: 1000 - total flux cleaned = -0.00069197 Jy ! Component: 1050 - total flux cleaned = -0.000592762 Jy ! Component: 1100 - total flux cleaned = -0.000592197 Jy ! Component: 1150 - total flux cleaned = -0.000495319 Jy ! Component: 1200 - total flux cleaned = -0.000303629 Jy ! Component: 1250 - total flux cleaned = -0.000241114 Jy ! Component: 1300 - total flux cleaned = -0.00020979 Jy ! Component: 1350 - total flux cleaned = -0.000147835 Jy ! Component: 1400 - total flux cleaned = -8.62658e-05 Jy ! Component: 1450 - total flux cleaned = -5.56569e-05 Jy ! Component: 1500 - total flux cleaned = 9.48658e-05 Jy ! Component: 1550 - total flux cleaned = 0.000273339 Jy ! Component: 1600 - total flux cleaned = 0.000332447 Jy ! Component: 1650 - total flux cleaned = 0.000419924 Jy ! Component: 1700 - total flux cleaned = 0.000419857 Jy ! Component: 1750 - total flux cleaned = 0.000563413 Jy ! Component: 1800 - total flux cleaned = 0.000619896 Jy ! Component: 1850 - total flux cleaned = 0.00064811 Jy ! Component: 1900 - total flux cleaned = 0.000704474 Jy ! Component: 1950 - total flux cleaned = 0.000815566 Jy ! Component: 2000 - total flux cleaned = 0.000898238 Jy ! Component: 2050 - total flux cleaned = 0.00100782 Jy ! Component: 2100 - total flux cleaned = 0.00103503 Jy ! Component: 2150 - total flux cleaned = 0.0011428 Jy ! Component: 2200 - total flux cleaned = 0.00119671 Jy ! Component: 2250 - total flux cleaned = 0.00135655 Jy ! Component: 2300 - total flux cleaned = 0.00151501 Jy ! Component: 2350 - total flux cleaned = 0.00159367 Jy ! Component: 2400 - total flux cleaned = 0.00169763 Jy ! Component: 2450 - total flux cleaned = 0.00177533 Jy ! Component: 2500 - total flux cleaned = 0.00187788 Jy ! Component: 2550 - total flux cleaned = 0.00185231 Jy ! Component: 2600 - total flux cleaned = 0.00192822 Jy ! Component: 2650 - total flux cleaned = 0.00197862 Jy ! Component: 2700 - total flux cleaned = 0.0021286 Jy ! Component: 2750 - total flux cleaned = 0.00220311 Jy ! Component: 2800 - total flux cleaned = 0.00222762 Jy ! Component: 2850 - total flux cleaned = 0.0023748 Jy ! Component: 2900 - total flux cleaned = 0.00235068 Jy ! Component: 2950 - total flux cleaned = 0.00244756 Jy ! Component: 3000 - total flux cleaned = 0.00254384 Jy ! Component: 3050 - total flux cleaned = 0.00256767 Jy ! Component: 3100 - total flux cleaned = 0.00263911 Jy ! Component: 3150 - total flux cleaned = 0.00273384 Jy ! Component: 3200 - total flux cleaned = 0.00268702 Jy ! Component: 3250 - total flux cleaned = 0.00273377 Jy ! Component: 3300 - total flux cleaned = 0.00280352 Jy ! Component: 3350 - total flux cleaned = 0.00289589 Jy ! Component: 3400 - total flux cleaned = 0.00298765 Jy ! Component: 3450 - total flux cleaned = 0.00301035 Jy ! Component: 3500 - total flux cleaned = 0.00307847 Jy ! Component: 3550 - total flux cleaned = 0.00316881 Jy ! Component: 3600 - total flux cleaned = 0.00319129 Jy ! Component: 3650 - total flux cleaned = 0.00332528 Jy ! Component: 3700 - total flux cleaned = 0.00330285 Jy ! Component: 3750 - total flux cleaned = 0.0033693 Jy ! Component: 3800 - total flux cleaned = 0.00339147 Jy ! Component: 3850 - total flux cleaned = 0.00358867 Jy ! Component: 3900 - total flux cleaned = 0.00363217 Jy ! Component: 3950 - total flux cleaned = 0.00371903 Jy ! Component: 4000 - total flux cleaned = 0.00367583 Jy ! Component: 4050 - total flux cleaned = 0.00378343 Jy ! Total flux subtracted in 4096 components = 0.00397605 Jy ! Clean residual min=-0.001327 max=0.001468 Jy/beam ! Clean residual mean=0.000004 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.153401 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 306 components and 0.153401 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J1505-3432_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.372 x 3.943 at -35.2 degrees (North through East) ! Clean map min=-0.0023341 max=0.13971 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J1505-3432_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.139708 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00035914 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.771193 0.771193 1.54239 3.08477 6.16955 12.3391 24.6782 49.3564 98.7128 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.139 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J1505-3432_S_uvs.log closed on Sat Oct 5 08:48:20 2013