! Started logfile: /scr/pima/rdv72_uvs/J1343+6602_X_uvs.log on Sat Oct 5 08:47:49 2013 obs /scr/pima/rdv72_uvs/J1343+6602_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J1343+6602_X_uva.fits ! AN table 1: 20 integrations on 66 of 66 possible baselines. ! AN table 2: 62 integrations on 78 of 78 possible baselines. ! AN table 3: 3 integrations on 36 of 36 possible baselines. ! AN table 4: 10 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.853035 visibilities/baseline/integration-bin. ! Found source: J1343+6602 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 21476 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J1343+6602_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 105 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.082670Jy sigma=5.240691 ! Fit after self-cal, rms=0.625732Jy sigma=2.723399 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.4701 mas, bmaj=0.6592 mas, bpa=59 degrees ! Estimated noise=1.88747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.30325 Jy ! Component: 100 - total flux cleaned = 0.372363 Jy ! Total flux subtracted in 100 components = 0.372363 Jy ! Clean residual min=-0.012459 max=0.025450 Jy/beam ! Clean residual mean=0.000001 rms=0.002223 Jy/beam ! Combined flux in latest and established models = 0.372363 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.372363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158921Jy sigma=0.811451 ! Fit after self-cal, rms=0.158935Jy sigma=0.811426 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284878 Jy ! Component: 100 - total flux cleaned = 0.0477454 Jy ! Total flux subtracted in 100 components = 0.0477454 Jy ! Clean residual min=-0.012951 max=0.017104 Jy/beam ! Clean residual mean=-0.000001 rms=0.001984 Jy/beam ! Combined flux in latest and established models = 0.420108 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.420108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151191Jy sigma=0.723883 ! Fit after self-cal, rms=0.151213Jy sigma=0.723825 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (1.2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164934 Jy ! Component: 100 - total flux cleaned = 0.0278275 Jy ! Total flux subtracted in 100 components = 0.0278275 Jy ! Clean residual min=-0.012606 max=0.015725 Jy/beam ! Clean residual mean=-0.000002 rms=0.001893 Jy/beam ! Combined flux in latest and established models = 0.447936 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.447935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148864Jy sigma=0.688421 ! Fit after self-cal, rms=0.148792Jy sigma=0.687957 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-2.4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139287 Jy ! Component: 100 - total flux cleaned = 0.0226952 Jy ! Total flux subtracted in 100 components = 0.0226952 Jy ! Clean residual min=-0.011853 max=0.013903 Jy/beam ! Clean residual mean=-0.000003 rms=0.001833 Jy/beam ! Combined flux in latest and established models = 0.470631 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.470631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147333Jy sigma=0.668159 ! Fit after self-cal, rms=0.147298Jy sigma=0.667697 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (2.4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112005 Jy ! Component: 100 - total flux cleaned = 0.0184818 Jy ! Total flux subtracted in 100 components = 0.0184818 Jy ! Clean residual min=-0.011417 max=0.011162 Jy/beam ! Clean residual mean=-0.000003 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 0.489113 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.489113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146288Jy sigma=0.654273 ! Fit after self-cal, rms=0.146267Jy sigma=0.654158 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.6079 mas, bmaj=0.8182 mas, bpa=61.63 degrees ! Estimated noise=1.09481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215299 Jy ! Component: 100 - total flux cleaned = 0.0354693 Jy ! Component: 150 - total flux cleaned = 0.0461307 Jy ! Component: 200 - total flux cleaned = 0.0545445 Jy ! Total flux subtracted in 200 components = 0.0545445 Jy ! Clean residual min=-0.013593 max=0.017876 Jy/beam ! Clean residual mean=0.000020 rms=0.003228 Jy/beam ! Combined flux in latest and established models = 0.543657 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 46 components and 0.543657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145835Jy sigma=0.618550 ! Fit after self-cal, rms=0.145800Jy sigma=0.618154 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-1.2, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156294 Jy ! Component: 100 - total flux cleaned = 0.0233544 Jy ! Component: 150 - total flux cleaned = 0.0292862 Jy ! Component: 200 - total flux cleaned = 0.0340777 Jy ! Total flux subtracted in 200 components = 0.0340777 Jy ! Clean residual min=-0.013426 max=0.017336 Jy/beam ! Clean residual mean=0.000013 rms=0.002908 Jy/beam ! Combined flux in latest and established models = 0.577735 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.577735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144943Jy sigma=0.604893 ! Fit after self-cal, rms=0.144740Jy sigma=0.603022 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.78 KK 1.13 KP 0.98 ! LA 0.95 MK 1.00 NL 1.05 OV 1.01 ! PT 0.90 SC 0.85 WZ 1.00 ZC 1.43 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.23 FD 0.79 KK 1.20 KP 1.06 ! LA 0.97 MK 0.95 NL 1.07 NY 0.95 ! OV 0.97 PT 0.91 SC 0.84 WZ 1.08 ! ZC 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.27 FD 0.86 KP 1.23 LA 1.04 ! NL 1.11 OV 0.97 PT 0.99 SC 0.87 ! ZC 1.28 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.78 KK 1.15 KP 0.93 ! LA 0.93 MK 1.00 NL 1.07 OV 0.99 ! PT 0.96 SC 0.87 WZ 1.01 ZC 1.38 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.24 FD 0.80 KK 1.12 KP 1.01 ! LA 0.97 MK 0.98 NL 1.06 NY 1.00 ! OV 0.97 PT 0.96 SC 0.87 WZ 1.07 ! ZC 1.11 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.22 FD 0.86 KP 1.16 LA 0.99 ! NL 1.11 OV 0.94 PT 1.01 SC 0.94 ! ZC 1.30 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.79 KK 1.18 KP 0.84 ! LA 0.98 MK 1.03 NL 1.10 OV 1.07 ! PT 0.98 SC 0.92 WZ 1.04 ZC 1.19 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.30 FD 0.80 KK 1.19 KP 0.94 ! LA 1.01 MK 0.98 NL 1.12 NY 1.03 ! OV 1.01 PT 0.97 SC 0.89 WZ 1.13 ! ZC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.35 FD 0.81 KP 1.11 LA 1.00 ! NL 1.17 OV 1.04 PT 1.08 SC 0.95 ! ZC 1.11 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.82 KK 1.11 KP 0.92 ! LA 0.99 MK 1.08 NL 1.16 OV 1.05 ! PT 0.98 SC 0.93 WZ 1.05 ZC 1.24 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.30 FD 0.82 KK 1.14 KP 1.01 ! LA 1.04 MK 1.02 NL 1.18 NY 1.04 ! OV 1.01 PT 0.99 SC 0.89 WZ 1.14 ! ZC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.38 FD 0.89 KP 1.18 LA 1.12 ! NL 1.18 OV 1.01 PT 0.99 SC 0.91 ! ZC 1.17 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! ! Fit before self-cal, rms=0.144740Jy sigma=0.603022 ! Fit after self-cal, rms=0.130153Jy sigma=0.484541 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.619 mas, bmaj=0.8222 mas, bpa=61.32 degrees ! Estimated noise=1.09447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0122619 Jy ! Component: 100 - total flux cleaned = -0.0206416 Jy ! Component: 150 - total flux cleaned = -0.0268498 Jy ! Component: 200 - total flux cleaned = -0.0308921 Jy ! Total flux subtracted in 200 components = -0.0308921 Jy ! Clean residual min=-0.005783 max=0.006612 Jy/beam ! Clean residual mean=-0.000018 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.546843 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 76 components and 0.546842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128022Jy sigma=0.479072 ! Fit after self-cal, rms=0.128196Jy sigma=0.478712 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128196Jy sigma=0.478712 ! Fit after self-cal, rms=0.131488Jy sigma=0.448595 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.6204 mas, bmaj=0.8303 mas, bpa=62.04 degrees ! Estimated noise=1.09692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00613308 Jy ! Component: 100 - total flux cleaned = -0.0101339 Jy ! Component: 150 - total flux cleaned = -0.0120176 Jy ! Component: 200 - total flux cleaned = -0.0131721 Jy ! Total flux subtracted in 200 components = -0.0131721 Jy ! Clean residual min=-0.003740 max=0.004328 Jy/beam ! Clean residual mean=-0.000010 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.53367 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.53367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131155Jy sigma=0.446413 ! Fit after self-cal, rms=0.131231Jy sigma=0.446278 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203112 Jy ! Component: 100 - total flux cleaned = 0.00126681 Jy ! Component: 150 - total flux cleaned = 0.000718447 Jy ! Component: 200 - total flux cleaned = 0.000308577 Jy ! Total flux subtracted in 200 components = 0.000308577 Jy ! Clean residual min=-0.003614 max=0.002995 Jy/beam ! Clean residual mean=-0.000011 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.533979 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.533979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131042Jy sigma=0.445125 ! Fit after self-cal, rms=0.131024Jy sigma=0.445047 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131024Jy sigma=0.445047 ! Fit after self-cal, rms=0.131413Jy sigma=0.444110 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.623 mas, bmaj=0.8297 mas, bpa=62.17 degrees ! Estimated noise=1.09459 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00338602 Jy ! Component: 100 - total flux cleaned = -0.00498122 Jy ! Component: 150 - total flux cleaned = -0.00628729 Jy ! Component: 200 - total flux cleaned = -0.00685124 Jy ! Total flux subtracted in 200 components = -0.00685124 Jy ! Clean residual min=-0.003168 max=0.002964 Jy/beam ! Clean residual mean=-0.000009 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.527128 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.527128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131229Jy sigma=0.443010 ! Fit after self-cal, rms=0.131225Jy sigma=0.442986 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000566916 Jy ! Component: 100 - total flux cleaned = -0.000992936 Jy ! Component: 150 - total flux cleaned = -0.0013858 Jy ! Component: 200 - total flux cleaned = -0.00175101 Jy ! Total flux subtracted in 200 components = -0.00175101 Jy ! Clean residual min=-0.002935 max=0.002739 Jy/beam ! Clean residual mean=-0.000009 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.525377 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 0.525377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131152Jy sigma=0.442532 ! Fit after self-cal, rms=0.131144Jy sigma=0.442518 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131144Jy sigma=0.442518 ! Fit after self-cal, rms=0.130948Jy sigma=0.442117 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=2.471 mas, bmaj=3.094 mas, bpa=-49.56 degrees ! Estimated noise=1.47314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00428063 Jy ! Component: 100 - total flux cleaned = -0.00668782 Jy ! Component: 150 - total flux cleaned = -0.00791383 Jy ! Component: 200 - total flux cleaned = -0.00831979 Jy ! Total flux subtracted in 200 components = -0.00831979 Jy ! Clean residual min=-0.003001 max=0.003875 Jy/beam ! Clean residual mean=-0.000025 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.517057 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 106 components and 0.517057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130917Jy sigma=0.441833 ! Fit after self-cal, rms=0.130906Jy sigma=0.441799 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253289 Jy ! Component: 100 - total flux cleaned = 0.0027895 Jy ! Component: 150 - total flux cleaned = 0.00258143 Jy ! Component: 200 - total flux cleaned = 0.00239859 Jy ! Total flux subtracted in 200 components = 0.00239859 Jy ! Clean residual min=-0.002663 max=0.002956 Jy/beam ! Clean residual mean=-0.000017 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.519456 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 128 components and 0.519456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130872Jy sigma=0.441573 ! Fit after self-cal, rms=0.130872Jy sigma=0.441553 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.6253 mas, bmaj=0.829 mas, bpa=62.27 degrees ! Estimated noise=1.09239 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6253 x 0.829 at 62.27 degrees (North through East) ! Clean map min=-0.0019076 max=0.40818 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.4763 mas, bmaj=0.6662 mas, bpa=59.21 degrees ! Estimated noise=1.945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.312841 Jy ! Component: 100 - total flux cleaned = 0.383342 Jy ! Component: 150 - total flux cleaned = 0.409787 Jy ! Component: 200 - total flux cleaned = 0.425647 Jy ! Total flux subtracted in 200 components = 0.425647 Jy ! Clean residual min=-0.004146 max=0.008939 Jy/beam ! Clean residual mean=-0.000001 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.425647 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.425647 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.6253 mas, bmaj=0.829 mas, bpa=62.27 degrees ! Estimated noise=1.09239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0278555 Jy ! Component: 100 - total flux cleaned = 0.0438877 Jy ! Component: 150 - total flux cleaned = 0.0540346 Jy ! Component: 200 - total flux cleaned = 0.0612773 Jy ! Total flux subtracted in 200 components = 0.0612773 Jy ! Clean residual min=-0.003129 max=0.005293 Jy/beam ! Clean residual mean=-0.000005 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.486924 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 57 components and 0.486924 Jy ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (1, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587728 Jy ! Component: 100 - total flux cleaned = 0.0103148 Jy ! Component: 150 - total flux cleaned = 0.0138962 Jy ! Component: 200 - total flux cleaned = 0.0168656 Jy ! Total flux subtracted in 200 components = 0.0168656 Jy ! Clean residual min=-0.002546 max=0.002831 Jy/beam ! Clean residual mean=-0.000006 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.50379 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 91 components and 0.50379 Jy ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-1.2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279111 Jy ! Component: 100 - total flux cleaned = 0.00411024 Jy ! Component: 150 - total flux cleaned = 0.00538106 Jy ! Component: 200 - total flux cleaned = 0.00623699 Jy ! Total flux subtracted in 200 components = 0.00623699 Jy ! Clean residual min=-0.002362 max=0.002511 Jy/beam ! Clean residual mean=-0.000006 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.510027 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 120 components and 0.510027 Jy ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (2.6, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209222 Jy ! Component: 100 - total flux cleaned = 0.0026429 Jy ! Component: 150 - total flux cleaned = 0.00302901 Jy ! Component: 200 - total flux cleaned = 0.00345524 Jy ! Total flux subtracted in 200 components = 0.00345524 Jy ! Clean residual min=-0.002256 max=0.002439 Jy/beam ! Clean residual mean=-0.000006 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.513482 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 144 components and 0.513482 Jy ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (5.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153826 Jy ! Component: 100 - total flux cleaned = 0.00183596 Jy ! Component: 150 - total flux cleaned = 0.00206246 Jy ! Component: 200 - total flux cleaned = 0.00233607 Jy ! Total flux subtracted in 200 components = 0.00233607 Jy ! Clean residual min=-0.002141 max=0.002082 Jy/beam ! Clean residual mean=-0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.515818 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 163 components and 0.515818 Jy ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=2.471 mas, bmaj=3.094 mas, bpa=-49.56 degrees ! Estimated noise=1.47314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167703 Jy ! Component: 100 - total flux cleaned = 0.0026461 Jy ! Component: 150 - total flux cleaned = 0.00324441 Jy ! Component: 200 - total flux cleaned = 0.00342448 Jy ! Total flux subtracted in 200 components = 0.00342448 Jy ! Clean residual min=-0.002662 max=0.002545 Jy/beam ! Clean residual mean=-0.000014 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.519242 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020749 Jy ! Component: 100 - total flux cleaned = 0.000285338 Jy ! Component: 150 - total flux cleaned = 0.000397305 Jy ! Component: 200 - total flux cleaned = 0.000504117 Jy ! Total flux subtracted in 200 components = 0.000504117 Jy ! Clean residual min=-0.002589 max=0.002506 Jy/beam ! Clean residual mean=-0.000014 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.519746 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 197 components and 0.519746 Jy ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.6253 mas, bmaj=0.829 mas, bpa=62.27 degrees ! Estimated noise=1.09239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000735108 Jy ! Component: 100 - total flux cleaned = -0.000841624 Jy ! Component: 150 - total flux cleaned = -0.000940441 Jy ! Component: 200 - total flux cleaned = -0.00089359 Jy ! Total flux subtracted in 200 components = -0.00089359 Jy ! Clean residual min=-0.002233 max=0.002034 Jy/beam ! Clean residual mean=-0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.518853 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 218 components and 0.518853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130650Jy sigma=0.439676 ! Fit after self-cal, rms=0.130595Jy sigma=0.439553 wmodel /scr/pima/rdv72_uvs/J1343+6602_X_map.mod ! Writing 218 model components to file: /scr/pima/rdv72_uvs/J1343+6602_X_map.mod wobs /scr/pima/rdv72_uvs/J1343+6602_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J1343+6602_X_uvs.fits wwins /scr/pima/rdv72_uvs/J1343+6602_X_map.win ! wwins: Wrote 11 windows to /scr/pima/rdv72_uvs/J1343+6602_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000757183 Jy ! Component: 100 - total flux cleaned = -0.00149939 Jy ! Component: 150 - total flux cleaned = -0.00196267 Jy ! Component: 200 - total flux cleaned = -0.00241319 Jy ! Component: 250 - total flux cleaned = -0.00278561 Jy ! Component: 300 - total flux cleaned = -0.00315221 Jy ! Component: 350 - total flux cleaned = -0.00351315 Jy ! Component: 400 - total flux cleaned = -0.00370718 Jy ! Component: 450 - total flux cleaned = -0.00386702 Jy ! Component: 500 - total flux cleaned = -0.00396212 Jy ! Component: 550 - total flux cleaned = -0.0040883 Jy ! Component: 600 - total flux cleaned = -0.00433698 Jy ! Component: 650 - total flux cleaned = -0.00452098 Jy ! Component: 700 - total flux cleaned = -0.00458189 Jy ! Component: 750 - total flux cleaned = -0.00473348 Jy ! Component: 800 - total flux cleaned = -0.00488323 Jy ! Component: 850 - total flux cleaned = -0.00497209 Jy ! Component: 900 - total flux cleaned = -0.00509009 Jy ! Component: 950 - total flux cleaned = -0.00511916 Jy ! Component: 1000 - total flux cleaned = -0.0051484 Jy ! Component: 1050 - total flux cleaned = -0.00529308 Jy ! Component: 1100 - total flux cleaned = -0.00537904 Jy ! Component: 1150 - total flux cleaned = -0.005436 Jy ! Component: 1200 - total flux cleaned = -0.00552092 Jy ! Component: 1250 - total flux cleaned = -0.00552097 Jy ! Component: 1300 - total flux cleaned = -0.005521 Jy ! Component: 1350 - total flux cleaned = -0.00563266 Jy ! Component: 1400 - total flux cleaned = -0.00552184 Jy ! Component: 1450 - total flux cleaned = -0.00571517 Jy ! Component: 1500 - total flux cleaned = -0.0058797 Jy ! Component: 1550 - total flux cleaned = -0.00593393 Jy ! Component: 1600 - total flux cleaned = -0.00596136 Jy ! Component: 1650 - total flux cleaned = -0.00617736 Jy ! Component: 1700 - total flux cleaned = -0.0060968 Jy ! Component: 1750 - total flux cleaned = -0.00628382 Jy ! Component: 1800 - total flux cleaned = -0.0063903 Jy ! Component: 1850 - total flux cleaned = -0.00639028 Jy ! Component: 1900 - total flux cleaned = -0.00652198 Jy ! Component: 1950 - total flux cleaned = -0.00652212 Jy ! Component: 2000 - total flux cleaned = -0.00654822 Jy ! Component: 2050 - total flux cleaned = -0.00670415 Jy ! Component: 2100 - total flux cleaned = -0.00675589 Jy ! Component: 2150 - total flux cleaned = -0.00685891 Jy ! Component: 2200 - total flux cleaned = -0.00683317 Jy ! Component: 2250 - total flux cleaned = -0.00706345 Jy ! Component: 2300 - total flux cleaned = -0.00711439 Jy ! Component: 2350 - total flux cleaned = -0.00708887 Jy ! Component: 2400 - total flux cleaned = -0.00721552 Jy ! Component: 2450 - total flux cleaned = -0.00716496 Jy ! Component: 2500 - total flux cleaned = -0.00734093 Jy ! Component: 2550 - total flux cleaned = -0.00739108 Jy ! Component: 2600 - total flux cleaned = -0.00729128 Jy ! Component: 2650 - total flux cleaned = -0.0074654 Jy ! Component: 2700 - total flux cleaned = -0.00751515 Jy ! Component: 2750 - total flux cleaned = -0.00758935 Jy ! Component: 2800 - total flux cleaned = -0.0077127 Jy ! Component: 2850 - total flux cleaned = -0.0076636 Jy ! Component: 2900 - total flux cleaned = -0.00785938 Jy ! Component: 2950 - total flux cleaned = -0.00790827 Jy ! Component: 3000 - total flux cleaned = -0.00810299 Jy ! Component: 3050 - total flux cleaned = -0.00810297 Jy ! Component: 3100 - total flux cleaned = -0.00800626 Jy ! Component: 3150 - total flux cleaned = -0.00812688 Jy ! Component: 3200 - total flux cleaned = -0.00829533 Jy ! Component: 3250 - total flux cleaned = -0.0084152 Jy ! Component: 3300 - total flux cleaned = -0.00853467 Jy ! Component: 3350 - total flux cleaned = -0.00855848 Jy ! Component: 3400 - total flux cleaned = -0.00858229 Jy ! Component: 3450 - total flux cleaned = -0.00865336 Jy ! Component: 3500 - total flux cleaned = -0.00888968 Jy ! Component: 3550 - total flux cleaned = -0.00888956 Jy ! Component: 3600 - total flux cleaned = -0.00888957 Jy ! Component: 3650 - total flux cleaned = -0.00900689 Jy ! Component: 3700 - total flux cleaned = -0.00912378 Jy ! Component: 3750 - total flux cleaned = -0.00912378 Jy ! Component: 3800 - total flux cleaned = -0.0092401 Jy ! Component: 3850 - total flux cleaned = -0.00921689 Jy ! Component: 3900 - total flux cleaned = -0.0093557 Jy ! Component: 3950 - total flux cleaned = -0.00942495 Jy ! Component: 4000 - total flux cleaned = -0.009494 Jy ! Component: 4050 - total flux cleaned = -0.00963168 Jy ! Total flux subtracted in 4096 components = -0.00970022 Jy ! Clean residual min=-0.001447 max=0.001366 Jy/beam ! Clean residual mean=-0.000004 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.509153 Jy keep ! Adding 374 model components to the UV plane model. ! The established model now contains 592 components and 0.509153 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J1343+6602_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6253 x 0.829 at 62.27 degrees (North through East) ! Clean map min=-0.0020514 max=0.41141 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J1343+6602_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.411408 invert ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000375275 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.273652 0.273652 0.547304 1.09461 2.18922 4.37844 8.75687 17.5137 35.0275 70.055 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.411 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J1343+6602_X_uvs.log closed on Sat Oct 5 08:47:55 2013