! Started logfile: /scr/pima/rdv72_uvs/J1329+5009_S_uvs.log on Sat Oct 5 08:47:33 2013 obs /scr/pima/rdv72_uvs/J1329+5009_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J1329+5009_S_uva.fits ! AN table 1: 32 integrations on 66 of 66 possible baselines. ! AN table 2: 26 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.971936 visibilities/baseline/integration-bin. ! Found source: J1329+5009 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8312 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J1329+5009_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 52 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 52 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 52 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 52 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.012197Jy sigma=1.813561 ! Fit after self-cal, rms=0.860574Jy sigma=1.522186 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.43 mas, bmaj=3.354 mas, bpa=23.48 degrees ! Estimated noise=8.4617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113024 Jy ! Component: 100 - total flux cleaned = 0.137986 Jy ! Total flux subtracted in 100 components = 0.137986 Jy ! Clean residual min=-0.010220 max=0.019974 Jy/beam ! Clean residual mean=-0.000023 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 0.137986 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.137986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104387Jy sigma=0.163554 ! Fit after self-cal, rms=0.104391Jy sigma=0.163529 ! Inverting map ! Added new window around map position (-2.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155072 Jy ! Component: 100 - total flux cleaned = 0.0186959 Jy ! Total flux subtracted in 100 components = 0.0186959 Jy ! Clean residual min=-0.007290 max=0.012062 Jy/beam ! Clean residual mean=-0.000024 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.156682 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 8 components and 0.156682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101907Jy sigma=0.159145 ! Fit after self-cal, rms=0.101776Jy sigma=0.158777 ! Inverting map ! Added new window around map position (8.5, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00973249 Jy ! Component: 100 - total flux cleaned = 0.0100533 Jy ! Total flux subtracted in 100 components = 0.0100533 Jy ! Clean residual min=-0.007469 max=0.007319 Jy/beam ! Clean residual mean=-0.000026 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 0.166735 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.166735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101045Jy sigma=0.158068 ! Fit after self-cal, rms=0.101010Jy sigma=0.157952 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.995 mas, bmaj=3.731 mas, bpa=23.42 degrees ! Estimated noise=4.54746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00257876 Jy ! Component: 100 - total flux cleaned = -0.00308258 Jy ! Component: 150 - total flux cleaned = -0.00330113 Jy ! Component: 200 - total flux cleaned = -0.0033946 Jy ! Total flux subtracted in 200 components = -0.0033946 Jy ! Clean residual min=-0.006739 max=0.006029 Jy/beam ! Clean residual mean=-0.000066 rms=0.001546 Jy/beam ! Combined flux in latest and established models = 0.163341 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.163341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100719Jy sigma=0.157494 ! Fit after self-cal, rms=0.100699Jy sigma=0.157483 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00 KK 0.92 KP 0.98 ! LA 1.07 MK 0.96 NL 0.98 NY 1.22 ! OV 0.97 PT 1.10 WZ 0.95 ZC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! KK 0.00* MK 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.11 KK 0.83 KP 1.06 ! LA 1.03 MK 1.03 NL 0.97 NY 1.09 ! OV 1.02 PT 1.10 WZ 0.89 ZC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! KK 0.00* MK 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.14 KK 0.89 KP 1.06 ! LA 0.97 MK 1.06 NL 1.09 NY 1.03 ! OV 1.07 PT 1.10 WZ 0.78 ZC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! KK 0.00* MK 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 KK 0.85 KP 0.94 ! LA 0.81 MK 1.18 NL 1.01 NY 1.13 ! OV 0.90 PT 1.00 WZ 0.76 ZC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! KK 0.00* MK 0.00* ! ! ! Fit before self-cal, rms=0.100699Jy sigma=0.157483 ! Fit after self-cal, rms=0.093334Jy sigma=0.152345 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.941 mas, bmaj=3.679 mas, bpa=23.74 degrees ! Estimated noise=4.58105 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403374 Jy ! Component: 100 - total flux cleaned = 0.00476652 Jy ! Component: 150 - total flux cleaned = 0.00485527 Jy ! Component: 200 - total flux cleaned = 0.0050114 Jy ! Total flux subtracted in 200 components = 0.0050114 Jy ! Clean residual min=-0.003616 max=0.003599 Jy/beam ! Clean residual mean=-0.000032 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.168352 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.168352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093006Jy sigma=0.151773 ! Fit after self-cal, rms=0.093092Jy sigma=0.151688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093092Jy sigma=0.151688 ! Fit after self-cal, rms=0.092899Jy sigma=0.151533 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.92 mas, bmaj=3.66 mas, bpa=23.79 degrees ! Estimated noise=4.59768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022211 Jy ! Component: 100 - total flux cleaned = 0.00282745 Jy ! Component: 150 - total flux cleaned = 0.00310026 Jy ! Component: 200 - total flux cleaned = 0.00327492 Jy ! Total flux subtracted in 200 components = 0.00327492 Jy ! Clean residual min=-0.003310 max=0.003266 Jy/beam ! Clean residual mean=-0.000024 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.171627 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.171627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092760Jy sigma=0.151259 ! Fit after self-cal, rms=0.092790Jy sigma=0.151249 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.27541e-05 Jy ! Component: 100 - total flux cleaned = 0.00022807 Jy ! Component: 150 - total flux cleaned = 0.000387514 Jy ! Component: 200 - total flux cleaned = 0.000423933 Jy ! Total flux subtracted in 200 components = 0.000423933 Jy ! Clean residual min=-0.003303 max=0.003247 Jy/beam ! Clean residual mean=-0.000024 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.172051 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.172051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092755Jy sigma=0.151186 ! Fit after self-cal, rms=0.092762Jy sigma=0.151184 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092762Jy sigma=0.151184 ! Fit after self-cal, rms=0.092690Jy sigma=0.151103 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.906 mas, bmaj=3.646 mas, bpa=23.82 degrees ! Estimated noise=4.60324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130342 Jy ! Component: 100 - total flux cleaned = 0.00151365 Jy ! Component: 150 - total flux cleaned = 0.00173461 Jy ! Component: 200 - total flux cleaned = 0.00192348 Jy ! Total flux subtracted in 200 components = 0.00192348 Jy ! Clean residual min=-0.003239 max=0.003144 Jy/beam ! Clean residual mean=-0.000018 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.173974 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.173974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092641Jy sigma=0.150994 ! Fit after self-cal, rms=0.092663Jy sigma=0.150991 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.9895e-05 Jy ! Component: 100 - total flux cleaned = 0.000161957 Jy ! Component: 150 - total flux cleaned = 0.00019092 Jy ! Component: 200 - total flux cleaned = 0.000244155 Jy ! Total flux subtracted in 200 components = 0.000244155 Jy ! Clean residual min=-0.003247 max=0.003162 Jy/beam ! Clean residual mean=-0.000018 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.174218 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.174218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092646Jy sigma=0.150962 ! Fit after self-cal, rms=0.092649Jy sigma=0.150962 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092649Jy sigma=0.150962 ! Fit after self-cal, rms=0.092758Jy sigma=0.150933 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.324 mas, bmaj=13.51 mas, bpa=78.62 degrees ! Estimated noise=6.76984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154783 Jy ! Component: 100 - total flux cleaned = 0.00177001 Jy ! Component: 150 - total flux cleaned = 0.0018169 Jy ! Component: 200 - total flux cleaned = 0.00183911 Jy ! Total flux subtracted in 200 components = 0.00183911 Jy ! Clean residual min=-0.004478 max=0.004777 Jy/beam ! Clean residual mean=-0.000039 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.176058 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 61 components and 0.176058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092775Jy sigma=0.150951 ! Fit after self-cal, rms=0.092788Jy sigma=0.150946 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.52341e-05 Jy ! Component: 100 - total flux cleaned = 6.64902e-05 Jy ! Component: 150 - total flux cleaned = 6.64788e-05 Jy ! Component: 200 - total flux cleaned = 6.64191e-05 Jy ! Total flux subtracted in 200 components = 6.64191e-05 Jy ! Clean residual min=-0.004470 max=0.004795 Jy/beam ! Clean residual mean=-0.000039 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.176124 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 61 components and 0.176124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092800Jy sigma=0.150961 ! Fit after self-cal, rms=0.092802Jy sigma=0.150961 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.899 mas, bmaj=3.637 mas, bpa=23.86 degrees ! Estimated noise=4.60869 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.899 x 3.637 at 23.86 degrees (North through East) ! Clean map min=-0.0028706 max=0.13563 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.383 mas, bmaj=3.315 mas, bpa=24.39 degrees ! Estimated noise=8.15245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108445 Jy ! Component: 100 - total flux cleaned = 0.137034 Jy ! Component: 150 - total flux cleaned = 0.150922 Jy ! Component: 200 - total flux cleaned = 0.158848 Jy ! Total flux subtracted in 200 components = 0.158848 Jy ! Clean residual min=-0.005297 max=0.004955 Jy/beam ! Clean residual mean=-0.000008 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.158848 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.158848 Jy ! Inverting map and beam ! Estimated beam: bmin=1.899 mas, bmaj=3.637 mas, bpa=23.86 degrees ! Estimated noise=4.60869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.007876 Jy ! Component: 100 - total flux cleaned = 0.0119295 Jy ! Component: 150 - total flux cleaned = 0.0140793 Jy ! Component: 200 - total flux cleaned = 0.0148258 Jy ! Total flux subtracted in 200 components = 0.0148258 Jy ! Clean residual min=-0.003436 max=0.003234 Jy/beam ! Clean residual mean=-0.000014 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.173674 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 44 components and 0.173674 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.324 mas, bmaj=13.51 mas, bpa=78.62 degrees ! Estimated noise=6.76984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239678 Jy ! Component: 100 - total flux cleaned = 0.00260064 Jy ! Component: 150 - total flux cleaned = 0.00272354 Jy ! Component: 200 - total flux cleaned = 0.00282769 Jy ! Total flux subtracted in 200 components = 0.00282769 Jy ! Clean residual min=-0.004442 max=0.004532 Jy/beam ! Clean residual mean=-0.000038 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.176502 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.16685e-05 Jy ! Component: 100 - total flux cleaned = -3.31342e-05 Jy ! Component: 150 - total flux cleaned = -3.21625e-05 Jy ! Component: 200 - total flux cleaned = -3.36592e-05 Jy ! Total flux subtracted in 200 components = -3.36592e-05 Jy ! Clean residual min=-0.004390 max=0.004537 Jy/beam ! Clean residual mean=-0.000038 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.176468 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.176468 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.899 mas, bmaj=3.637 mas, bpa=23.86 degrees ! Estimated noise=4.60869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000637214 Jy ! Component: 100 - total flux cleaned = -0.000696464 Jy ! Component: 150 - total flux cleaned = -0.000604156 Jy ! Component: 200 - total flux cleaned = -0.000563278 Jy ! Total flux subtracted in 200 components = -0.000563278 Jy ! Clean residual min=-0.003257 max=0.002967 Jy/beam ! Clean residual mean=-0.000013 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.175905 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.175905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092769Jy sigma=0.150884 ! Fit after self-cal, rms=0.092731Jy sigma=0.150865 wmodel /scr/pima/rdv72_uvs/J1329+5009_S_map.mod ! Writing 71 model components to file: /scr/pima/rdv72_uvs/J1329+5009_S_map.mod wobs /scr/pima/rdv72_uvs/J1329+5009_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J1329+5009_S_uvs.fits wwins /scr/pima/rdv72_uvs/J1329+5009_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rdv72_uvs/J1329+5009_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000654877 Jy ! Component: 100 - total flux cleaned = -0.000816068 Jy ! Component: 150 - total flux cleaned = -0.00107228 Jy ! Component: 200 - total flux cleaned = -0.00121917 Jy ! Component: 250 - total flux cleaned = -0.00117044 Jy ! Component: 300 - total flux cleaned = -0.0011246 Jy ! Component: 350 - total flux cleaned = -0.00112506 Jy ! Component: 400 - total flux cleaned = -0.00104014 Jy ! Component: 450 - total flux cleaned = -0.00120843 Jy ! Component: 500 - total flux cleaned = -0.00133178 Jy ! Component: 550 - total flux cleaned = -0.00161451 Jy ! Component: 600 - total flux cleaned = -0.00177423 Jy ! Component: 650 - total flux cleaned = -0.00216455 Jy ! Component: 700 - total flux cleaned = -0.00235642 Jy ! Component: 750 - total flux cleaned = -0.00254549 Jy ! Component: 800 - total flux cleaned = -0.00276839 Jy ! Component: 850 - total flux cleaned = -0.00280525 Jy ! Component: 900 - total flux cleaned = -0.00302287 Jy ! Component: 950 - total flux cleaned = -0.00316581 Jy ! Component: 1000 - total flux cleaned = -0.00334213 Jy ! Component: 1050 - total flux cleaned = -0.00344669 Jy ! Component: 1100 - total flux cleaned = -0.00361962 Jy ! Component: 1150 - total flux cleaned = -0.00385918 Jy ! Component: 1200 - total flux cleaned = -0.00409548 Jy ! Component: 1250 - total flux cleaned = -0.00426257 Jy ! Component: 1300 - total flux cleaned = -0.0045277 Jy ! Component: 1350 - total flux cleaned = -0.00472519 Jy ! Component: 1400 - total flux cleaned = -0.0050508 Jy ! Component: 1450 - total flux cleaned = -0.00511494 Jy ! Component: 1500 - total flux cleaned = -0.00524316 Jy ! Component: 1550 - total flux cleaned = -0.00549735 Jy ! Component: 1600 - total flux cleaned = -0.00571691 Jy ! Component: 1650 - total flux cleaned = -0.00577894 Jy ! Component: 1700 - total flux cleaned = -0.00602688 Jy ! Component: 1750 - total flux cleaned = -0.00618037 Jy ! Component: 1800 - total flux cleaned = -0.00639388 Jy ! Component: 1850 - total flux cleaned = -0.00666616 Jy ! Component: 1900 - total flux cleaned = -0.00681636 Jy ! Component: 1950 - total flux cleaned = -0.00705512 Jy ! Component: 2000 - total flux cleaned = -0.00732124 Jy ! Component: 2050 - total flux cleaned = -0.00752696 Jy ! Component: 2100 - total flux cleaned = -0.00776053 Jy ! Component: 2150 - total flux cleaned = -0.00787645 Jy ! Component: 2200 - total flux cleaned = -0.00813542 Jy ! Component: 2250 - total flux cleaned = -0.00836417 Jy ! Component: 2300 - total flux cleaned = -0.00853462 Jy ! Component: 2350 - total flux cleaned = -0.00873214 Jy ! Component: 2400 - total flux cleaned = -0.00890026 Jy ! Component: 2450 - total flux cleaned = -0.00912303 Jy ! Component: 2500 - total flux cleaned = -0.00928898 Jy ! Component: 2550 - total flux cleaned = -0.00950925 Jy ! Component: 2600 - total flux cleaned = -0.00953681 Jy ! Component: 2650 - total flux cleaned = -0.00972742 Jy ! Component: 2700 - total flux cleaned = -0.00988952 Jy ! Component: 2750 - total flux cleaned = -0.00994324 Jy ! Component: 2800 - total flux cleaned = -0.00999677 Jy ! Component: 2850 - total flux cleaned = -0.0100235 Jy ! Component: 2900 - total flux cleaned = -0.0101295 Jy ! Component: 2950 - total flux cleaned = -0.0103403 Jy ! Component: 3000 - total flux cleaned = -0.0105237 Jy ! Component: 3050 - total flux cleaned = -0.0104715 Jy ! Component: 3100 - total flux cleaned = -0.0105497 Jy ! Component: 3150 - total flux cleaned = -0.0107045 Jy ! Component: 3200 - total flux cleaned = -0.0108331 Jy ! Component: 3250 - total flux cleaned = -0.0108588 Jy ! Component: 3300 - total flux cleaned = -0.0110624 Jy ! Component: 3350 - total flux cleaned = -0.011189 Jy ! Component: 3400 - total flux cleaned = -0.0112647 Jy ! Component: 3450 - total flux cleaned = -0.011365 Jy ! Component: 3500 - total flux cleaned = -0.0114897 Jy ! Component: 3550 - total flux cleaned = -0.0114898 Jy ! Component: 3600 - total flux cleaned = -0.0116629 Jy ! Component: 3650 - total flux cleaned = -0.0117123 Jy ! Component: 3700 - total flux cleaned = -0.0118104 Jy ! Component: 3750 - total flux cleaned = -0.0118836 Jy ! Component: 3800 - total flux cleaned = -0.0119565 Jy ! Component: 3850 - total flux cleaned = -0.0120534 Jy ! Component: 3900 - total flux cleaned = -0.0120536 Jy ! Component: 3950 - total flux cleaned = -0.0121496 Jy ! Component: 4000 - total flux cleaned = -0.0122214 Jy ! Component: 4050 - total flux cleaned = -0.0122927 Jy ! Total flux subtracted in 4096 components = -0.0122453 Jy ! Clean residual min=-0.001355 max=0.001387 Jy/beam ! Clean residual mean=-0.000005 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.16366 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 363 components and 0.16366 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J1329+5009_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.899 x 3.637 at 23.86 degrees (North through East) ! Clean map min=-0.0027209 max=0.13197 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J1329+5009_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.131972 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000404786 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.920164 0.920164 1.84033 3.68066 7.36131 14.7226 29.4453 58.8905 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.131 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J1329+5009_S_uvs.log closed on Sat Oct 5 08:47:37 2013