! Started logfile: /scr/pima/rdv72_uvs/J1033+4116_S_uvs.log on Sat Oct  5 08:46:56 2013
obs /scr/pima/rdv72_uvs/J1033+4116_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv72_uvs/J1033+4116_S_uva.fits
! AN table 1: 11 integrations on 45 of 45 possible baselines.
! AN table 2: 4 integrations on 3 of 3 possible baselines.
! AN table 3: 18 integrations on 55 of 55 possible baselines.
! AN table 4: 4 integrations on 3 of 3 possible baselines.
! AN table 5: 4 integrations on 6 of 6 possible baselines.
! AN table 6: 2 integrations on 1 of 1 possible baselines.
! AN table 7: 13 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.630667 visibilities/baseline/integration-bin.
! Found source: J1033+4116
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09      1.6e+07          1      1.6e+07
!  02        2  2.26299e+09      1.6e+07          1      1.6e+07
!  03        3  2.35299e+09      1.6e+07          1      1.6e+07
!  04        4  2.37299e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5676 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J1033+4116_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 91 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  A total of 1 telescope corrections were flagged in sub-array 5.
!  A total of 4 telescope corrections were flagged in sub-array 6.
!  A total of 42 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 91 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  A total of 1 telescope corrections were flagged in sub-array 5.
!  A total of 4 telescope corrections were flagged in sub-array 6.
!  A total of 42 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 91 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  A total of 1 telescope corrections were flagged in sub-array 5.
!  A total of 4 telescope corrections were flagged in sub-array 6.
!  A total of 42 telescope corrections were flagged in sub-array 7.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 91 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  A total of 1 telescope corrections were flagged in sub-array 5.
!  A total of 4 telescope corrections were flagged in sub-array 6.
!  A total of 42 telescope corrections were flagged in sub-array 7.
! 
! Fit before self-cal, rms=1.056410Jy  sigma=5.509216
! Fit after  self-cal, rms=0.684618Jy  sigma=3.360362
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.009 mas, bmaj=3.46 mas, bpa=0.9385 degrees
! Estimated noise=3.03482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.263896 Jy
! Component: 100  -  total flux cleaned = 0.327273 Jy
! Total flux subtracted in 100 components = 0.327273 Jy
! Clean residual min=-0.015920 max=0.025488 Jy/beam
! Clean residual mean=-0.000044 rms=0.003587 Jy/beam
! Combined flux in latest and established models = 0.327273 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.327273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138986Jy  sigma=0.637052
! Fit after  self-cal, rms=0.138866Jy  sigma=0.636889
! Inverting map 
! Added new window around map position (2.5, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0260912 Jy
! Component: 100  -  total flux cleaned = 0.0300885 Jy
! Total flux subtracted in 100 components = 0.0300885 Jy
! Clean residual min=-0.014546 max=0.021802 Jy/beam
! Clean residual mean=-0.000021 rms=0.003218 Jy/beam
! Combined flux in latest and established models = 0.357361 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.357361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135848Jy  sigma=0.599091
! Fit after  self-cal, rms=0.135748Jy  sigma=0.598216
! Inverting map 
! Added new window around map position (0.5, 7.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0186282 Jy
! Component: 100  -  total flux cleaned = 0.0248399 Jy
! Total flux subtracted in 100 components = 0.0248399 Jy
! Clean residual min=-0.013490 max=0.015343 Jy/beam
! Clean residual mean=-0.000002 rms=0.003042 Jy/beam
! Combined flux in latest and established models = 0.382201 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 26 components and 0.382201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133150Jy  sigma=0.579547
! Fit after  self-cal, rms=0.132909Jy  sigma=0.578167
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.549 mas, bmaj=4.188 mas, bpa=0.2561 degrees
! Estimated noise=1.92366 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109656 Jy
! Component: 100  -  total flux cleaned = 0.0128682 Jy
! Component: 150  -  total flux cleaned = 0.0139413 Jy
! Component: 200  -  total flux cleaned = 0.0145043 Jy
! Total flux subtracted in 200 components = 0.0145043 Jy
! Clean residual min=-0.011125 max=0.012883 Jy/beam
! Clean residual mean=0.000042 rms=0.002740 Jy/beam
! Combined flux in latest and established models = 0.396705 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 34 components and 0.396705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131887Jy  sigma=0.570742
! Fit after  self-cal, rms=0.131785Jy  sigma=0.570080
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        0.96     KP        0.99     LA        1.07     
!   MK        0.87     NL        0.90     NY        1.52     OV        0.97     
!   PT        1.04     ZC        4.54     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.10     FD        0.96     KP        1.13     LA        1.12     
!   NL        0.95     NY        1.55     OV        0.92     PT        1.08     
!   SC        1.03     WZ        0.89     ZC        1.17     
! 
!  A total of 9 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KK        0.00*    MK        0.00*    OV        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.27     KK        0.79     MK        0.86     NL        0.97     
! 
!  Telescope amplitude corrections in sub-array 6:
!   KK        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.06     FD        0.97     KK        0.86     KP        1.22     
!   LA        1.05     MK        0.92     NL        0.97     NY        1.33     
!   OV        0.97     PT        1.06     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        1.03     KP        1.04     LA        0.98     
!   MK        0.89     NL        0.96     NY        1.38     OV        1.03     
!   PT        1.00     ZC        4.49     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.14     FD        1.06     KP        1.11     LA        0.97     
!   NL        0.95     NY        1.30     OV        1.02     PT        1.08     
!   SC        1.03     WZ        0.78     ZC        0.98     
! 
!  A total of 9 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KK        0.00*    MK        0.00*    OV        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.34     KK        0.79     MK        0.89     NL        1.06     
! 
!  Telescope amplitude corrections in sub-array 6:
!   KK        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.11     FD        1.05     KK        0.82     KP        1.19     
!   LA        0.96     MK        0.96     NL        1.01     NY        1.17     
!   OV        1.03     PT        1.02     SC        1.14     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.51     FD        1.01     KP        1.03     LA        0.88     
!   MK        0.90     NL        0.94     NY        1.37     OV        1.06     
!   PT        1.03     ZC        2.81     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.17     FD        1.10     KP        1.10     LA        0.91     
!   NL        1.03     NY        1.30     OV        1.03     PT        1.06     
!   SC        0.95     WZ        0.75     ZC        0.84     
! 
!  A total of 9 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KK        0.00*    MK        0.00*    OV        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.20     KK        0.76     MK        0.96     NL        1.15     
! 
!  Telescope amplitude corrections in sub-array 6:
!   KK        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.15     FD        1.05     KK        0.82     KP        1.26     
!   LA        0.87     MK        0.97     NL        1.05     NY        1.11     
!   OV        1.02     PT        1.06     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.46     FD        1.03     KP        0.92     LA        0.74     
!   MK        1.00     NL        0.85     NY        1.39     OV        0.88     
!   PT        0.92     ZC        3.01     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.06     FD        1.03     KP        1.03     LA        0.78     
!   NL        0.97     NY        1.33     OV        0.84     PT        0.94     
!   SC        1.00     WZ        0.74     ZC        0.84     
! 
!  A total of 9 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KK        0.00*    MK        0.00*    OV        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.21     KK        0.74     MK        1.06     NL        0.98     
! 
!  Telescope amplitude corrections in sub-array 6:
!   KK        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        0.92     FD        1.02     KK        0.80     KP        1.23     
!   LA        0.76     MK        1.06     NL        0.97     NY        1.11     
!   OV        0.84     PT        0.92     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.131785Jy  sigma=0.570080
! Fit after  self-cal, rms=0.119338Jy  sigma=0.454204
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.523 mas, bmaj=4.258 mas, bpa=-1.398 degrees
! Estimated noise=1.95011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00599942 Jy
! Component: 100  -  total flux cleaned = 0.00704034 Jy
! Component: 150  -  total flux cleaned = 0.00752749 Jy
! Component: 200  -  total flux cleaned = 0.00780245 Jy
! Total flux subtracted in 200 components = 0.00780245 Jy
! Clean residual min=-0.004363 max=0.004691 Jy/beam
! Clean residual mean=0.000030 rms=0.001144 Jy/beam
! Combined flux in latest and established models = 0.404508 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 53 components and 0.404508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118723Jy  sigma=0.449124
! Fit after  self-cal, rms=0.118998Jy  sigma=0.448298
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118998Jy  sigma=0.448298
! Fit after  self-cal, rms=0.118786Jy  sigma=0.447771
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.515 mas, bmaj=4.256 mas, bpa=-1.509 degrees
! Estimated noise=1.94356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111342 Jy
! Component: 100  -  total flux cleaned = 0.0016871 Jy
! Component: 150  -  total flux cleaned = 0.00204423 Jy
! Component: 200  -  total flux cleaned = 0.00243996 Jy
! Total flux subtracted in 200 components = 0.00243996 Jy
! Clean residual min=-0.003937 max=0.004079 Jy/beam
! Clean residual mean=0.000023 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.406948 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 61 components and 0.406948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118487Jy  sigma=0.445930
! Fit after  self-cal, rms=0.118486Jy  sigma=0.445774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000779999 Jy
! Component: 100  -  total flux cleaned = 0.0011232 Jy
! Component: 150  -  total flux cleaned = 0.00135606 Jy
! Component: 200  -  total flux cleaned = 0.00149523 Jy
! Total flux subtracted in 200 components = 0.00149523 Jy
! Clean residual min=-0.003846 max=0.004004 Jy/beam
! Clean residual mean=0.000025 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.408443 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 77 components and 0.408443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118374Jy  sigma=0.445117
! Fit after  self-cal, rms=0.118374Jy  sigma=0.445064
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118374Jy  sigma=0.445064
! Fit after  self-cal, rms=0.128520Jy  sigma=0.458125
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.491 mas, bmaj=4.245 mas, bpa=-1.809 degrees
! Estimated noise=1.96622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00625403 Jy
! Component: 100  -  total flux cleaned = 0.00752245 Jy
! Component: 150  -  total flux cleaned = 0.0080385 Jy
! Component: 200  -  total flux cleaned = 0.00826066 Jy
! Total flux subtracted in 200 components = 0.00826066 Jy
! Clean residual min=-0.004533 max=0.006004 Jy/beam
! Clean residual mean=-0.000027 rms=0.001217 Jy/beam
! Combined flux in latest and established models = 0.416704 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 88 components and 0.416704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128065Jy  sigma=0.455422
! Fit after  self-cal, rms=0.128117Jy  sigma=0.455126
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-71.5, -89.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561858 Jy
! Component: 100  -  total flux cleaned = 0.00826199 Jy
! Component: 150  -  total flux cleaned = 0.0091033 Jy
! Component: 200  -  total flux cleaned = 0.00967136 Jy
! Total flux subtracted in 200 components = 0.00967136 Jy
! Clean residual min=-0.004186 max=0.004814 Jy/beam
! Clean residual mean=-0.000030 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.426375 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 104 components and 0.426375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127833Jy  sigma=0.453396
! Fit after  self-cal, rms=0.127792Jy  sigma=0.453298
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127792Jy  sigma=0.453298
! Fit after  self-cal, rms=0.130108Jy  sigma=0.455193
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.14 mas, bmaj=10.92 mas, bpa=-38.33 degrees
! Estimated noise=2.58312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00613807 Jy
! Component: 100  -  total flux cleaned = 0.00782324 Jy
! Component: 150  -  total flux cleaned = 0.00825669 Jy
! Component: 200  -  total flux cleaned = 0.00862183 Jy
! Total flux subtracted in 200 components = 0.00862183 Jy
! Clean residual min=-0.006042 max=0.006180 Jy/beam
! Clean residual mean=-0.000081 rms=0.001934 Jy/beam
! Combined flux in latest and established models = 0.434997 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.434997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129946Jy  sigma=0.454373
! Fit after  self-cal, rms=0.129897Jy  sigma=0.454114
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000448964 Jy
! Component: 100  -  total flux cleaned = 0.000728018 Jy
! Component: 150  -  total flux cleaned = 0.00102189 Jy
! Component: 200  -  total flux cleaned = 0.00127576 Jy
! Total flux subtracted in 200 components = 0.00127576 Jy
! Clean residual min=-0.005945 max=0.005987 Jy/beam
! Clean residual mean=-0.000084 rms=0.001918 Jy/beam
! Combined flux in latest and established models = 0.436273 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 132 components and 0.436273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129871Jy  sigma=0.454371
! Fit after  self-cal, rms=0.129871Jy  sigma=0.454349
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.475 mas, bmaj=4.233 mas, bpa=-1.882 degrees
! Estimated noise=1.98122 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.475 x 4.233 at -1.882 degrees (North through East)
! Clean map  min=-0.0041873  max=0.33546 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.948 mas, bmaj=3.516 mas, bpa=-1.09 degrees
! Estimated noise=3.06925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.262036 Jy
! Component: 100  -  total flux cleaned = 0.322653 Jy
! Component: 150  -  total flux cleaned = 0.347539 Jy
! Component: 200  -  total flux cleaned = 0.363787 Jy
! Total flux subtracted in 200 components = 0.363787 Jy
! Clean residual min=-0.007252 max=0.010020 Jy/beam
! Clean residual mean=-0.000044 rms=0.001791 Jy/beam
! Combined flux in latest and established models = 0.363788 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.363788 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.475 mas, bmaj=4.233 mas, bpa=-1.882 degrees
! Estimated noise=1.98122 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0200581 Jy
! Component: 100  -  total flux cleaned = 0.0326404 Jy
! Component: 150  -  total flux cleaned = 0.0414796 Jy
! Component: 200  -  total flux cleaned = 0.0482929 Jy
! Total flux subtracted in 200 components = 0.0482929 Jy
! Clean residual min=-0.004622 max=0.006092 Jy/beam
! Clean residual mean=-0.000058 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.41208 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 55 components and 0.41208 Jy
! Inverting map 
! Added new window around map position (9.5, 5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00617775 Jy
! Component: 100  -  total flux cleaned = 0.0108278 Jy
! Component: 150  -  total flux cleaned = 0.014664 Jy
! Component: 200  -  total flux cleaned = 0.0171442 Jy
! Total flux subtracted in 200 components = 0.0171442 Jy
! Clean residual min=-0.004134 max=0.004891 Jy/beam
! Clean residual mean=-0.000037 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 0.429225 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 85 components and 0.429225 Jy
! Inverting map 
! Added new window around map position (30, -127.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407245 Jy
! Component: 100  -  total flux cleaned = 0.00594183 Jy
! Component: 150  -  total flux cleaned = 0.0075077 Jy
! Component: 200  -  total flux cleaned = 0.00874247 Jy
! Total flux subtracted in 200 components = 0.00874247 Jy
! Clean residual min=-0.004148 max=0.004507 Jy/beam
! Clean residual mean=-0.000035 rms=0.001121 Jy/beam
! Combined flux in latest and established models = 0.437967 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 108 components and 0.437967 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.14 mas, bmaj=10.92 mas, bpa=-38.33 degrees
! Estimated noise=2.58312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308926 Jy
! Component: 100  -  total flux cleaned = 0.00395661 Jy
! Component: 150  -  total flux cleaned = 0.00436879 Jy
! Component: 200  -  total flux cleaned = 0.00466548 Jy
! Total flux subtracted in 200 components = 0.00466548 Jy
! Clean residual min=-0.006902 max=0.005947 Jy/beam
! Clean residual mean=-0.000068 rms=0.001904 Jy/beam
! Combined flux in latest and established models = 0.442633 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019922 Jy
! Component: 100  -  total flux cleaned = 0.00043769 Jy
! Component: 150  -  total flux cleaned = 0.000602454 Jy
! Component: 200  -  total flux cleaned = 0.000806752 Jy
! Total flux subtracted in 200 components = 0.000806752 Jy
! Clean residual min=-0.006962 max=0.005943 Jy/beam
! Clean residual mean=-0.000069 rms=0.001898 Jy/beam
! Combined flux in latest and established models = 0.443439 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 138 components and 0.443439 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.475 mas, bmaj=4.233 mas, bpa=-1.882 degrees
! Estimated noise=1.98122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000548678 Jy
! Component: 100  -  total flux cleaned = -0.000475629 Jy
! Component: 150  -  total flux cleaned = -0.000477681 Jy
! Component: 200  -  total flux cleaned = -0.00042094 Jy
! Total flux subtracted in 200 components = -0.00042094 Jy
! Clean residual min=-0.004316 max=0.004633 Jy/beam
! Clean residual mean=-0.000031 rms=0.001112 Jy/beam
! Combined flux in latest and established models = 0.443018 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 155 components and 0.443018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129177Jy  sigma=0.452761
! Fit after  self-cal, rms=0.129216Jy  sigma=0.452262
wmodel /scr/pima/rdv72_uvs/J1033+4116_S_map.mod
! Writing 155 model components to file: /scr/pima/rdv72_uvs/J1033+4116_S_map.mod
wobs /scr/pima/rdv72_uvs/J1033+4116_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv72_uvs/J1033+4116_S_uvs.fits
wwins /scr/pima/rdv72_uvs/J1033+4116_S_map.win
! wwins: Wrote 7 windows to /scr/pima/rdv72_uvs/J1033+4116_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000669532 Jy
! Component: 100  -  total flux cleaned = 0.00112789 Jy
! Component: 150  -  total flux cleaned = 0.00112874 Jy
! Component: 200  -  total flux cleaned = 0.000775749 Jy
! Component: 250  -  total flux cleaned = 0.000501543 Jy
! Component: 300  -  total flux cleaned = 0.000368339 Jy
! Component: 350  -  total flux cleaned = 0.000302913 Jy
! Component: 400  -  total flux cleaned = 0.000237774 Jy
! Component: 450  -  total flux cleaned = 0.000363521 Jy
! Component: 500  -  total flux cleaned = 0.000363712 Jy
! Component: 550  -  total flux cleaned = 0.00060875 Jy
! Component: 600  -  total flux cleaned = 0.000848789 Jy
! Component: 650  -  total flux cleaned = 0.00108493 Jy
! Component: 700  -  total flux cleaned = 0.00131815 Jy
! Component: 750  -  total flux cleaned = 0.00160586 Jy
! Component: 800  -  total flux cleaned = 0.00160711 Jy
! Component: 850  -  total flux cleaned = 0.00194349 Jy
! Component: 900  -  total flux cleaned = 0.00221938 Jy
! Component: 950  -  total flux cleaned = 0.00254521 Jy
! Component: 1000  -  total flux cleaned = 0.00292074 Jy
! Component: 1050  -  total flux cleaned = 0.00307995 Jy
! Component: 1100  -  total flux cleaned = 0.00334257 Jy
! Component: 1150  -  total flux cleaned = 0.00355007 Jy
! Component: 1200  -  total flux cleaned = 0.003756 Jy
! Component: 1250  -  total flux cleaned = 0.00395914 Jy
! Component: 1300  -  total flux cleaned = 0.0042114 Jy
! Component: 1350  -  total flux cleaned = 0.00446048 Jy
! Component: 1400  -  total flux cleaned = 0.00465766 Jy
! Component: 1450  -  total flux cleaned = 0.00470655 Jy
! Component: 1500  -  total flux cleaned = 0.00485206 Jy
! Component: 1550  -  total flux cleaned = 0.00504487 Jy
! Component: 1600  -  total flux cleaned = 0.00504503 Jy
! Component: 1650  -  total flux cleaned = 0.00513985 Jy
! Component: 1700  -  total flux cleaned = 0.00537431 Jy
! Component: 1750  -  total flux cleaned = 0.00546722 Jy
! Component: 1800  -  total flux cleaned = 0.00528247 Jy
! Component: 1850  -  total flux cleaned = 0.00537414 Jy
! Component: 1900  -  total flux cleaned = 0.00555624 Jy
! Component: 1950  -  total flux cleaned = 0.00564571 Jy
! Component: 2000  -  total flux cleaned = 0.00578022 Jy
! Component: 2050  -  total flux cleaned = 0.00595755 Jy
! Component: 2100  -  total flux cleaned = 0.00591326 Jy
! Component: 2150  -  total flux cleaned = 0.00608881 Jy
! Component: 2200  -  total flux cleaned = 0.00608914 Jy
! Component: 2250  -  total flux cleaned = 0.00639182 Jy
! Component: 2300  -  total flux cleaned = 0.00647766 Jy
! Component: 2350  -  total flux cleaned = 0.00669074 Jy
! Component: 2400  -  total flux cleaned = 0.00681792 Jy
! Component: 2450  -  total flux cleaned = 0.00686008 Jy
! Component: 2500  -  total flux cleaned = 0.00698584 Jy
! Component: 2550  -  total flux cleaned = 0.00711079 Jy
! Component: 2600  -  total flux cleaned = 0.00706941 Jy
! Component: 2650  -  total flux cleaned = 0.00715168 Jy
! Component: 2700  -  total flux cleaned = 0.00735606 Jy
! Component: 2750  -  total flux cleaned = 0.00747732 Jy
! Component: 2800  -  total flux cleaned = 0.00759811 Jy
! Component: 2850  -  total flux cleaned = 0.00763826 Jy
! Component: 2900  -  total flux cleaned = 0.00771782 Jy
! Component: 2950  -  total flux cleaned = 0.00787592 Jy
! Component: 3000  -  total flux cleaned = 0.00791558 Jy
! Component: 3050  -  total flux cleaned = 0.00799369 Jy
! Component: 3100  -  total flux cleaned = 0.00795463 Jy
! Component: 3150  -  total flux cleaned = 0.00818629 Jy
! Component: 3200  -  total flux cleaned = 0.00810939 Jy
! Component: 3250  -  total flux cleaned = 0.00822389 Jy
! Component: 3300  -  total flux cleaned = 0.00818565 Jy
! Component: 3350  -  total flux cleaned = 0.00833711 Jy
! Component: 3400  -  total flux cleaned = 0.00837451 Jy
! Component: 3450  -  total flux cleaned = 0.00841221 Jy
! Component: 3500  -  total flux cleaned = 0.00841276 Jy
! Component: 3550  -  total flux cleaned = 0.00852383 Jy
! Component: 3600  -  total flux cleaned = 0.00852378 Jy
! Component: 3650  -  total flux cleaned = 0.00874408 Jy
! Component: 3700  -  total flux cleaned = 0.0088537 Jy
! Component: 3750  -  total flux cleaned = 0.00881721 Jy
! Component: 3800  -  total flux cleaned = 0.00885297 Jy
! Component: 3850  -  total flux cleaned = 0.00892491 Jy
! Component: 3900  -  total flux cleaned = 0.00892494 Jy
! Component: 3950  -  total flux cleaned = 0.00874669 Jy
! Component: 4000  -  total flux cleaned = 0.00888878 Jy
! Component: 4050  -  total flux cleaned = 0.00910063 Jy
! Total flux subtracted in 4096 components = 0.00896025 Jy
! Clean residual min=-0.001944 max=0.002067 Jy/beam
! Clean residual mean=-0.000027 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.451979 Jy
keep
! Adding 350 model components to the UV plane model.
! The established model now contains 505 components and 0.451978 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv72_uvs/J1033+4116_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.475 x 4.233 at -1.882 degrees (North through East)
! Clean map  min=-0.0035236  max=0.33959 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J1033+4116_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.339592 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000631011 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.557443 0.557443 1.11489 2.22977 4.45954 8.91908 17.8382 35.6763 71.3527
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0018 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.339 
quit
! Quitting program
! Log file /scr/pima/rdv72_uvs/J1033+4116_S_uvs.log closed on Sat Oct  5 08:47:00 2013