! Started logfile: /scr/pima/rdv72_uvs/J1029-1852_X_uvs.log on Sat Oct  5 08:46:56 2013
obs /scr/pima/rdv72_uvs/J1029-1852_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv72_uvs/J1029-1852_X_uva.fits
! AN table 1: 12 integrations on 1 of 1 possible baselines.
! AN table 2: 12 integrations on 6 of 6 possible baselines.
! AN table 3: 14 integrations on 21 of 21 possible baselines.
! AN table 4: 3 integrations on 21 of 21 possible baselines.
! AN table 5: 3 integrations on 28 of 28 possible baselines.
! AN table 6: 5 integrations on 36 of 36 possible baselines.
! AN table 7: 5 integrations on 6 of 6 possible baselines.
! AN table 8: 4 integrations on 3 of 3 possible baselines.
! Apparent sampling: 0.694779 visibilities/baseline/integration-bin.
! Found source: J1029-1852
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09      1.6e+07          1      1.6e+07
!  02        2  8.47599e+09      1.6e+07          1      1.6e+07
!  03        3  8.79099e+09      1.6e+07          1      1.6e+07
!  04        4  8.89599e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2076 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J1029-1852_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  A total of 13 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  A total of 10 telescope corrections were flagged in sub-array 6.
!  A total of 12 telescope corrections were flagged in sub-array 8.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  A total of 13 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  A total of 10 telescope corrections were flagged in sub-array 6.
!  A total of 12 telescope corrections were flagged in sub-array 8.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  A total of 13 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  A total of 10 telescope corrections were flagged in sub-array 6.
!  A total of 12 telescope corrections were flagged in sub-array 8.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  A total of 13 telescope corrections were flagged in sub-array 3.
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  A total of 10 telescope corrections were flagged in sub-array 6.
!  A total of 12 telescope corrections were flagged in sub-array 8.
! 
! Fit before self-cal, rms=1.050442Jy  sigma=3.023615
! Fit after  self-cal, rms=0.752483Jy  sigma=1.912904
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8246 mas, bmaj=2.306 mas, bpa=-11.61 degrees
! Estimated noise=9.15883 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.209374 Jy
! Component: 100  -  total flux cleaned = 0.278669 Jy
! Total flux subtracted in 100 components = 0.278669 Jy
! Clean residual min=-0.022547 max=0.036753 Jy/beam
! Clean residual mean=0.000300 rms=0.005765 Jy/beam
! Combined flux in latest and established models = 0.278669 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.278669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156692Jy  sigma=0.463935
! Fit after  self-cal, rms=0.156796Jy  sigma=0.463820
! Inverting map 
! Added new window around map position (-1.4, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0381314 Jy
! Component: 100  -  total flux cleaned = 0.0602342 Jy
! Total flux subtracted in 100 components = 0.0602342 Jy
! Clean residual min=-0.022541 max=0.022879 Jy/beam
! Clean residual mean=0.000206 rms=0.004639 Jy/beam
! Combined flux in latest and established models = 0.338903 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 47 components and 0.338903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146011Jy  sigma=0.396131
! Fit after  self-cal, rms=0.145925Jy  sigma=0.395517
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9736 mas, bmaj=2.977 mas, bpa=-11.07 degrees
! Estimated noise=6.35374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0343159 Jy
! Component: 100  -  total flux cleaned = 0.0532836 Jy
! Component: 150  -  total flux cleaned = 0.0642689 Jy
! Component: 200  -  total flux cleaned = 0.0706834 Jy
! Total flux subtracted in 200 components = 0.0706834 Jy
! Clean residual min=-0.025780 max=0.022338 Jy/beam
! Clean residual mean=0.000395 rms=0.005585 Jy/beam
! Combined flux in latest and established models = 0.409587 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 64 components and 0.409587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143024Jy  sigma=0.356114
! Fit after  self-cal, rms=0.143066Jy  sigma=0.355676
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   SC        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     NL        1.36     SC        0.73     WZ        1.10     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.81     KP        1.44     LA        0.98     NL        0.99     
!   PT        0.93     SC        1.05     WZ        1.40     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.74     KP        1.21     LA        0.97     NL        1.07     
!   OV        1.16     PT        1.00     SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.33     FD        0.76     KP        1.61     LA        1.00     
!   NL        1.05     OV        1.12     PT        1.01     SC        1.08     
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.29     FD        0.81     KP        1.62     LA        0.89     
!   MK        1.08     NL        1.10     OV        1.05     PT        0.94     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.39     KK        1.55     MK        0.95     OV        0.85     
! 
!  Telescope amplitude corrections in sub-array 8:
!   BR        0.00*    KK        0.00*    MK        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   SC        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.81     NL        1.21     SC        0.82     WZ        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.76     KP        1.39     LA        0.93     NL        1.03     
!   PT        1.02     SC        1.13     WZ        1.15     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.78     KP        1.48     LA        1.03     NL        0.96     
!   OV        1.03     PT        1.10     SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.35     FD        0.85     KP        1.33     LA        0.92     
!   NL        1.04     OV        1.04     PT        1.00     SC        1.35     
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.35     FD        0.82     KP        1.15     LA        0.99     
!   MK        0.94     NL        1.11     OV        1.06     PT        1.04     
!   SC        0.84     
! 
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.23     KK        1.05     MK        1.03     OV        0.92     
! 
!  Telescope amplitude corrections in sub-array 8:
!   BR        0.00*    KK        0.00*    MK        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   SC        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.94     NL        1.39     SC        0.83     WZ        1.59     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.81     KP        1.46     LA        0.99     NL        1.03     
!   PT        0.98     SC        1.06     WZ        1.02     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.77     KP        1.11     LA        1.01     NL        1.02     
!   OV        1.19     PT        1.12     SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.38     FD        0.81     KP        1.18     LA        1.05     
!   NL        1.13     OV        1.15     PT        1.02     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.51     FD        0.87     KP        1.33     LA        0.96     
!   MK        0.93     NL        1.01     OV        1.15     PT        1.01     
!   SC        0.89     
! 
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.14     KK        1.41     MK        0.86     OV        1.12     
! 
!  Telescope amplitude corrections in sub-array 8:
!   BR        0.00*    KK        0.00*    MK        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   SC        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.67     NL        1.19     SC        0.93     WZ        1.17     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.76     KP        1.38     LA        1.04     NL        1.01     
!   PT        1.04     SC        1.36     WZ        1.00     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.79     KP        1.30     LA        1.02     NL        1.11     
!   OV        1.23     PT        1.11     SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.33     FD        0.76     KP        1.36     LA        1.11     
!   NL        1.14     OV        1.08     PT        0.98     SC        1.27     
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.42     FD        0.89     KP        1.54     LA        0.94     
!   MK        0.94     NL        1.19     OV        1.11     PT        1.06     
!   SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.23     KK        1.26     MK        0.95     OV        1.16     
! 
!  Telescope amplitude corrections in sub-array 8:
!   BR        0.00*    KK        0.00*    MK        0.00*    
! 
! 
! Fit before self-cal, rms=0.143066Jy  sigma=0.355676
! Fit after  self-cal, rms=0.148786Jy  sigma=0.296737
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9835 mas, bmaj=3.046 mas, bpa=-10.93 degrees
! Estimated noise=6.42038 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00220127 Jy
! Component: 100  -  total flux cleaned = -0.00250368 Jy
! Component: 150  -  total flux cleaned = -0.00275283 Jy
! Component: 200  -  total flux cleaned = -0.00275122 Jy
! Total flux subtracted in 200 components = -0.00275122 Jy
! Clean residual min=-0.007765 max=0.008156 Jy/beam
! Clean residual mean=0.000010 rms=0.001898 Jy/beam
! Combined flux in latest and established models = 0.406836 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 71 components and 0.406836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148617Jy  sigma=0.296467
! Fit after  self-cal, rms=0.149892Jy  sigma=0.295916
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149892Jy  sigma=0.295916
! Fit after  self-cal, rms=0.149761Jy  sigma=0.295804
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9841 mas, bmaj=3.055 mas, bpa=-10.94 degrees
! Estimated noise=6.41318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00192777 Jy
! Component: 100  -  total flux cleaned = -0.00216752 Jy
! Component: 150  -  total flux cleaned = -0.00230328 Jy
! Component: 200  -  total flux cleaned = -0.0023031 Jy
! Total flux subtracted in 200 components = -0.0023031 Jy
! Clean residual min=-0.007789 max=0.007947 Jy/beam
! Clean residual mean=0.000008 rms=0.001870 Jy/beam
! Combined flux in latest and established models = 0.404533 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 74 components and 0.404532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149655Jy  sigma=0.295633
! Fit after  self-cal, rms=0.149716Jy  sigma=0.295621
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.07328e-05 Jy
! Component: 100  -  total flux cleaned = -8.25045e-05 Jy
! Component: 150  -  total flux cleaned = -0.00013804 Jy
! Component: 200  -  total flux cleaned = -0.00013732 Jy
! Total flux subtracted in 200 components = -0.00013732 Jy
! Clean residual min=-0.007840 max=0.007906 Jy/beam
! Clean residual mean=0.000009 rms=0.001869 Jy/beam
! Combined flux in latest and established models = 0.404395 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 76 components and 0.404395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149654Jy  sigma=0.295543
! Fit after  self-cal, rms=0.149672Jy  sigma=0.295538
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149672Jy  sigma=0.295538
! Fit after  self-cal, rms=0.149970Jy  sigma=0.295558
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9854 mas, bmaj=3.062 mas, bpa=-10.89 degrees
! Estimated noise=6.41628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000793914 Jy
! Component: 100  -  total flux cleaned = -0.00105286 Jy
! Component: 150  -  total flux cleaned = -0.00116422 Jy
! Component: 200  -  total flux cleaned = -0.00116554 Jy
! Total flux subtracted in 200 components = -0.00116554 Jy
! Clean residual min=-0.007601 max=0.007877 Jy/beam
! Clean residual mean=0.000005 rms=0.001859 Jy/beam
! Combined flux in latest and established models = 0.40323 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 79 components and 0.40323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149906Jy  sigma=0.295441
! Fit after  self-cal, rms=0.149932Jy  sigma=0.295432
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000114866 Jy
! Component: 100  -  total flux cleaned = -0.000112863 Jy
! Component: 150  -  total flux cleaned = -0.00011261 Jy
! Component: 200  -  total flux cleaned = -0.000111138 Jy
! Total flux subtracted in 200 components = -0.000111138 Jy
! Clean residual min=-0.007639 max=0.007817 Jy/beam
! Clean residual mean=0.000006 rms=0.001857 Jy/beam
! Combined flux in latest and established models = 0.403118 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 80 components and 0.403118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149886Jy  sigma=0.295381
! Fit after  self-cal, rms=0.149901Jy  sigma=0.295379
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149901Jy  sigma=0.295379
! Fit after  self-cal, rms=0.149858Jy  sigma=0.295340
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.858 mas, bmaj=5.532 mas, bpa=-21.43 degrees
! Estimated noise=6.52616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.68799e-05 Jy
! Component: 100  -  total flux cleaned = -0.000147271 Jy
! Component: 150  -  total flux cleaned = -0.000230997 Jy
! Component: 200  -  total flux cleaned = -0.000271225 Jy
! Total flux subtracted in 200 components = -0.000271225 Jy
! Clean residual min=-0.007136 max=0.008024 Jy/beam
! Clean residual mean=-0.000001 rms=0.002206 Jy/beam
! Combined flux in latest and established models = 0.402847 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 82 components and 0.402847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149848Jy  sigma=0.295297
! Fit after  self-cal, rms=0.149844Jy  sigma=0.295279
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.42433e-05 Jy
! Component: 100  -  total flux cleaned = -1.5636e-05 Jy
! Component: 150  -  total flux cleaned = -5.17489e-05 Jy
! Component: 200  -  total flux cleaned = -5.44437e-05 Jy
! Total flux subtracted in 200 components = -5.44437e-05 Jy
! Clean residual min=-0.007137 max=0.008077 Jy/beam
! Clean residual mean=-0.000001 rms=0.002204 Jy/beam
! Combined flux in latest and established models = 0.402793 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 84 components and 0.402793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149841Jy  sigma=0.295267
! Fit after  self-cal, rms=0.149833Jy  sigma=0.295256
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9877 mas, bmaj=3.065 mas, bpa=-10.85 degrees
! Estimated noise=6.41753 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9877 x 3.065 at -10.85 degrees (North through East)
! Clean map  min=-0.0072775  max=0.24567 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8157 mas, bmaj=2.368 mas, bpa=-11.3 degrees
! Estimated noise=9.63833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.219755 Jy
! Component: 100  -  total flux cleaned = 0.293236 Jy
! Component: 150  -  total flux cleaned = 0.330754 Jy
! Component: 200  -  total flux cleaned = 0.352162 Jy
! Total flux subtracted in 200 components = 0.352162 Jy
! Clean residual min=-0.010562 max=0.017863 Jy/beam
! Clean residual mean=0.000105 rms=0.002903 Jy/beam
! Combined flux in latest and established models = 0.352162 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 0.352162 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9877 mas, bmaj=3.065 mas, bpa=-10.85 degrees
! Estimated noise=6.41753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0241112 Jy
! Component: 100  -  total flux cleaned = 0.0363787 Jy
! Component: 150  -  total flux cleaned = 0.0436057 Jy
! Component: 200  -  total flux cleaned = 0.0471928 Jy
! Total flux subtracted in 200 components = 0.0471928 Jy
! Clean residual min=-0.007855 max=0.007256 Jy/beam
! Clean residual mean=0.000012 rms=0.001817 Jy/beam
! Combined flux in latest and established models = 0.399355 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 72 components and 0.399355 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.858 mas, bmaj=5.532 mas, bpa=-21.43 degrees
! Estimated noise=6.52616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173735 Jy
! Component: 100  -  total flux cleaned = 0.0022828 Jy
! Component: 150  -  total flux cleaned = 0.00261682 Jy
! Component: 200  -  total flux cleaned = 0.00261819 Jy
! Total flux subtracted in 200 components = 0.00261819 Jy
! Clean residual min=-0.007241 max=0.007735 Jy/beam
! Clean residual mean=-0.000007 rms=0.002163 Jy/beam
! Combined flux in latest and established models = 0.401973 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.15398e-05 Jy
! Component: 100  -  total flux cleaned = 0.00010087 Jy
! Component: 150  -  total flux cleaned = 0.000145261 Jy
! Component: 200  -  total flux cleaned = 0.000231539 Jy
! Total flux subtracted in 200 components = 0.000231539 Jy
! Clean residual min=-0.007160 max=0.007707 Jy/beam
! Clean residual mean=-0.000009 rms=0.002154 Jy/beam
! Combined flux in latest and established models = 0.402205 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 92 components and 0.402205 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9877 mas, bmaj=3.065 mas, bpa=-10.85 degrees
! Estimated noise=6.41753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.30464e-05 Jy
! Component: 100  -  total flux cleaned = -0.000161836 Jy
! Component: 150  -  total flux cleaned = -0.000158802 Jy
! Component: 200  -  total flux cleaned = -8.46147e-05 Jy
! Total flux subtracted in 200 components = -8.46147e-05 Jy
! Clean residual min=-0.007592 max=0.007628 Jy/beam
! Clean residual mean=-0.000004 rms=0.001777 Jy/beam
! Combined flux in latest and established models = 0.40212 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 103 components and 0.40212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149333Jy  sigma=0.294536
! Fit after  self-cal, rms=0.149272Jy  sigma=0.294367
wmodel /scr/pima/rdv72_uvs/J1029-1852_X_map.mod
! Writing 103 model components to file: /scr/pima/rdv72_uvs/J1029-1852_X_map.mod
wobs /scr/pima/rdv72_uvs/J1029-1852_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv72_uvs/J1029-1852_X_uvs.fits
wwins /scr/pima/rdv72_uvs/J1029-1852_X_map.win
! wwins: Wrote 3 windows to /scr/pima/rdv72_uvs/J1029-1852_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000916543 Jy
! Component: 100  -  total flux cleaned = 0.0018978 Jy
! Component: 150  -  total flux cleaned = 0.00247606 Jy
! Component: 200  -  total flux cleaned = 0.00280586 Jy
! Component: 250  -  total flux cleaned = 0.00333483 Jy
! Component: 300  -  total flux cleaned = 0.00384562 Jy
! Component: 350  -  total flux cleaned = 0.00443526 Jy
! Component: 400  -  total flux cleaned = 0.00490736 Jy
! Component: 450  -  total flux cleaned = 0.00527445 Jy
! Component: 500  -  total flux cleaned = 0.00554208 Jy
! Component: 550  -  total flux cleaned = 0.00580187 Jy
! Component: 600  -  total flux cleaned = 0.00588742 Jy
! Component: 650  -  total flux cleaned = 0.00638228 Jy
! Component: 700  -  total flux cleaned = 0.0067034 Jy
! Component: 750  -  total flux cleaned = 0.00678372 Jy
! Component: 800  -  total flux cleaned = 0.00709334 Jy
! Component: 850  -  total flux cleaned = 0.00716737 Jy
! Component: 900  -  total flux cleaned = 0.00716756 Jy
! Component: 950  -  total flux cleaned = 0.00738546 Jy
! Component: 1000  -  total flux cleaned = 0.00731331 Jy
! Component: 1050  -  total flux cleaned = 0.00752554 Jy
! Component: 1100  -  total flux cleaned = 0.0073867 Jy
! Component: 1150  -  total flux cleaned = 0.00752518 Jy
! Component: 1200  -  total flux cleaned = 0.00766029 Jy
! Component: 1250  -  total flux cleaned = 0.00786075 Jy
! Component: 1300  -  total flux cleaned = 0.0082575 Jy
! Component: 1350  -  total flux cleaned = 0.00864881 Jy
! Component: 1400  -  total flux cleaned = 0.00877809 Jy
! Component: 1450  -  total flux cleaned = 0.00935338 Jy
! Component: 1500  -  total flux cleaned = 0.0097324 Jy
! Component: 1550  -  total flux cleaned = 0.0100446 Jy
! Component: 1600  -  total flux cleaned = 0.0102932 Jy
! Component: 1650  -  total flux cleaned = 0.0106616 Jy
! Component: 1700  -  total flux cleaned = 0.0110871 Jy
! Component: 1750  -  total flux cleaned = 0.0112075 Jy
! Component: 1800  -  total flux cleaned = 0.0113868 Jy
! Component: 1850  -  total flux cleaned = 0.0116824 Jy
! Component: 1900  -  total flux cleaned = 0.0119163 Jy
! Component: 1950  -  total flux cleaned = 0.01209 Jy
! Component: 2000  -  total flux cleaned = 0.0124911 Jy
! Component: 2050  -  total flux cleaned = 0.0127185 Jy
! Component: 2100  -  total flux cleaned = 0.0129995 Jy
! Component: 2150  -  total flux cleaned = 0.013055 Jy
! Component: 2200  -  total flux cleaned = 0.0131666 Jy
! Component: 2250  -  total flux cleaned = 0.0135501 Jy
! Component: 2300  -  total flux cleaned = 0.0138215 Jy
! Component: 2350  -  total flux cleaned = 0.0141984 Jy
! Component: 2400  -  total flux cleaned = 0.0143586 Jy
! Component: 2450  -  total flux cleaned = 0.0144642 Jy
! Component: 2500  -  total flux cleaned = 0.0146749 Jy
! Component: 2550  -  total flux cleaned = 0.0147789 Jy
! Component: 2600  -  total flux cleaned = 0.0148313 Jy
! Component: 2650  -  total flux cleaned = 0.0151907 Jy
! Component: 2700  -  total flux cleaned = 0.0154455 Jy
! Component: 2750  -  total flux cleaned = 0.0155965 Jy
! Component: 2800  -  total flux cleaned = 0.0156971 Jy
! Component: 2850  -  total flux cleaned = 0.0159962 Jy
! Component: 2900  -  total flux cleaned = 0.0164412 Jy
! Component: 2950  -  total flux cleaned = 0.0165882 Jy
! Component: 3000  -  total flux cleaned = 0.016735 Jy
! Component: 3050  -  total flux cleaned = 0.0172201 Jy
! Component: 3100  -  total flux cleaned = 0.0174608 Jy
! Component: 3150  -  total flux cleaned = 0.0178434 Jy
! Component: 3200  -  total flux cleaned = 0.0181761 Jy
! Component: 3250  -  total flux cleaned = 0.0185539 Jy
! Component: 3300  -  total flux cleaned = 0.0188826 Jy
! Component: 3350  -  total flux cleaned = 0.019116 Jy
! Component: 3400  -  total flux cleaned = 0.0195797 Jy
! Component: 3450  -  total flux cleaned = 0.0199486 Jy
! Component: 3500  -  total flux cleaned = 0.0201775 Jy
! Component: 3550  -  total flux cleaned = 0.0204971 Jy
! Component: 3600  -  total flux cleaned = 0.0208592 Jy
! Component: 3650  -  total flux cleaned = 0.0213999 Jy
! Component: 3700  -  total flux cleaned = 0.0215787 Jy
! Component: 3750  -  total flux cleaned = 0.021712 Jy
! Component: 3800  -  total flux cleaned = 0.022067 Jy
! Component: 3850  -  total flux cleaned = 0.0224202 Jy
! Component: 3900  -  total flux cleaned = 0.0227709 Jy
! Component: 3950  -  total flux cleaned = 0.0229456 Jy
! Component: 4000  -  total flux cleaned = 0.023206 Jy
! Component: 4050  -  total flux cleaned = 0.0234654 Jy
! Total flux subtracted in 4096 components = 0.0237235 Jy
! Clean residual min=-0.002659 max=0.002627 Jy/beam
! Clean residual mean=0.000014 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.425844 Jy
keep
! Adding 251 model components to the UV plane model.
! The established model now contains 354 components and 0.425843 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv72_uvs/J1029-1852_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9877 x 3.065 at -10.85 degrees (North through East)
! Clean map  min=-0.0062695  max=0.25147 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J1029-1852_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.25147 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000749825 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.894529 0.894529 1.78906 3.57812 7.15624 14.3125 28.6249 57.2499
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0022 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.251 
quit
! Quitting program
! Log file /scr/pima/rdv72_uvs/J1029-1852_X_uvs.log closed on Sat Oct  5 08:47:00 2013