! Started logfile: /scr/pima/rdv72_uvs/J0954+2639_S_uvs.log on Sat Oct 5 08:46:40 2013 obs /scr/pima/rdv72_uvs/J0954+2639_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J0954+2639_S_uva.fits ! AN table 1: 32 integrations on 66 of 66 possible baselines. ! Apparent sampling: 0.96875 visibilities/baseline/integration-bin. ! Found source: J0954+2639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8184 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J0954+2639_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012897Jy sigma=2.407767 ! Fit after self-cal, rms=0.862956Jy sigma=2.015075 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.062 mas, bmaj=4.365 mas, bpa=-9.666 degrees ! Estimated noise=7.87359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116017 Jy ! Component: 100 - total flux cleaned = 0.148656 Jy ! Total flux subtracted in 100 components = 0.148656 Jy ! Clean residual min=-0.009367 max=0.013466 Jy/beam ! Clean residual mean=-0.000005 rms=0.002170 Jy/beam ! Combined flux in latest and established models = 0.148656 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.148656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096684Jy sigma=0.175674 ! Fit after self-cal, rms=0.096550Jy sigma=0.175617 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148682 Jy ! Component: 100 - total flux cleaned = 0.0233156 Jy ! Total flux subtracted in 100 components = 0.0233156 Jy ! Clean residual min=-0.008375 max=0.008739 Jy/beam ! Clean residual mean=-0.000004 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.171972 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.171972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094611Jy sigma=0.166543 ! Fit after self-cal, rms=0.094605Jy sigma=0.166520 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=5.548 mas, bpa=-6.386 degrees ! Estimated noise=3.69872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470714 Jy ! Component: 100 - total flux cleaned = 0.00579444 Jy ! Component: 150 - total flux cleaned = 0.00610348 Jy ! Component: 200 - total flux cleaned = 0.00638817 Jy ! Total flux subtracted in 200 components = 0.00638817 Jy ! Clean residual min=-0.007836 max=0.008871 Jy/beam ! Clean residual mean=-0.000022 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 0.17836 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.17836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094204Jy sigma=0.165545 ! Fit after self-cal, rms=0.094162Jy sigma=0.165526 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 KK 0.87 KP 1.32 ! LA 1.03 MK 0.95 NL 1.00 NY 1.49 ! OV 0.97 PT 1.04 SC 1.03 WZ 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 KK 0.81 KP 1.31 ! LA 0.95 MK 1.01 NL 1.04 NY 1.46 ! OV 1.04 PT 1.01 SC 1.09 WZ 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.06 KK 0.85 KP 1.28 ! LA 0.87 MK 0.99 NL 1.06 NY 1.29 ! OV 1.05 PT 1.05 SC 0.99 WZ 0.83 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 KK 0.84 KP 1.16 ! LA 0.74 MK 1.17 NL 1.04 NY 1.35 ! OV 0.89 PT 0.90 SC 1.01 WZ 0.81 ! ! ! Fit before self-cal, rms=0.094162Jy sigma=0.165526 ! Fit after self-cal, rms=0.093703Jy sigma=0.153431 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=5.712 mas, bpa=-6.348 degrees ! Estimated noise=3.73457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441821 Jy ! Component: 100 - total flux cleaned = 0.0046131 Jy ! Component: 150 - total flux cleaned = 0.00505169 Jy ! Component: 200 - total flux cleaned = 0.00536953 Jy ! Total flux subtracted in 200 components = 0.00536953 Jy ! Clean residual min=-0.004083 max=0.004283 Jy/beam ! Clean residual mean=-0.000008 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.183729 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 0.183729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093393Jy sigma=0.152699 ! Fit after self-cal, rms=0.093464Jy sigma=0.152552 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093464Jy sigma=0.152552 ! Fit after self-cal, rms=0.092476Jy sigma=0.152389 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=5.707 mas, bpa=-6.418 degrees ! Estimated noise=3.7236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022988 Jy ! Component: 100 - total flux cleaned = 0.00280708 Jy ! Component: 150 - total flux cleaned = 0.00291753 Jy ! Component: 200 - total flux cleaned = 0.00301931 Jy ! Total flux subtracted in 200 components = 0.00301931 Jy ! Clean residual min=-0.003863 max=0.004239 Jy/beam ! Clean residual mean=-0.000007 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.186749 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.186749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092367Jy sigma=0.152170 ! Fit after self-cal, rms=0.092362Jy sigma=0.152154 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389653 Jy ! Component: 100 - total flux cleaned = 0.00600962 Jy ! Component: 150 - total flux cleaned = 0.00714067 Jy ! Component: 200 - total flux cleaned = 0.00792568 Jy ! Total flux subtracted in 200 components = 0.00792568 Jy ! Clean residual min=-0.003769 max=0.002848 Jy/beam ! Clean residual mean=-0.000004 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.194674 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.194674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092129Jy sigma=0.151726 ! Fit after self-cal, rms=0.092106Jy sigma=0.151678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092106Jy sigma=0.151678 ! Fit after self-cal, rms=0.091708Jy sigma=0.151541 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=5.704 mas, bpa=-6.332 degrees ! Estimated noise=3.72609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163955 Jy ! Component: 100 - total flux cleaned = 0.00242295 Jy ! Component: 150 - total flux cleaned = 0.00281556 Jy ! Component: 200 - total flux cleaned = 0.00308325 Jy ! Total flux subtracted in 200 components = 0.00308325 Jy ! Clean residual min=-0.003491 max=0.002552 Jy/beam ! Clean residual mean=-0.000003 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.197758 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.197758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091624Jy sigma=0.151426 ! Fit after self-cal, rms=0.091614Jy sigma=0.151414 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409093 Jy ! Component: 100 - total flux cleaned = 0.000612996 Jy ! Component: 150 - total flux cleaned = 0.000729545 Jy ! Component: 200 - total flux cleaned = 0.000877095 Jy ! Total flux subtracted in 200 components = 0.000877095 Jy ! Clean residual min=-0.003446 max=0.002505 Jy/beam ! Clean residual mean=-0.000003 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.198635 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 85 components and 0.198635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091560Jy sigma=0.151369 ! Fit after self-cal, rms=0.091560Jy sigma=0.151366 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091560Jy sigma=0.151366 ! Fit after self-cal, rms=0.091496Jy sigma=0.151324 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.209 mas, bmaj=11.53 mas, bpa=6.651 degrees ! Estimated noise=4.24118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159901 Jy ! Component: 100 - total flux cleaned = 0.00232542 Jy ! Component: 150 - total flux cleaned = 0.00244315 Jy ! Component: 200 - total flux cleaned = 0.00256539 Jy ! Total flux subtracted in 200 components = 0.00256539 Jy ! Clean residual min=-0.003189 max=0.002962 Jy/beam ! Clean residual mean=-0.000007 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.2012 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.2012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091497Jy sigma=0.151333 ! Fit after self-cal, rms=0.091489Jy sigma=0.151317 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.27176e-05 Jy ! Component: 100 - total flux cleaned = 0.000127256 Jy ! Component: 150 - total flux cleaned = 0.000108759 Jy ! Component: 200 - total flux cleaned = 0.000108891 Jy ! Total flux subtracted in 200 components = 0.000108891 Jy ! Clean residual min=-0.003194 max=0.002965 Jy/beam ! Clean residual mean=-0.000006 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.201309 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 0.201309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091491Jy sigma=0.151312 ! Fit after self-cal, rms=0.091487Jy sigma=0.151304 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=5.706 mas, bpa=-6.324 degrees ! Estimated noise=3.73157 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.633 x 5.706 at -6.324 degrees (North through East) ! Clean map min=-0.0030587 max=0.14989 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.982 mas, bmaj=4.529 mas, bpa=-9.491 degrees ! Estimated noise=7.76383 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114315 Jy ! Component: 100 - total flux cleaned = 0.145393 Jy ! Component: 150 - total flux cleaned = 0.158816 Jy ! Component: 200 - total flux cleaned = 0.167009 Jy ! Total flux subtracted in 200 components = 0.167009 Jy ! Clean residual min=-0.005783 max=0.006160 Jy/beam ! Clean residual mean=-0.000003 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.167009 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.167009 Jy ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=5.706 mas, bpa=-6.324 degrees ! Estimated noise=3.73157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00863493 Jy ! Component: 100 - total flux cleaned = 0.0142603 Jy ! Component: 150 - total flux cleaned = 0.0186382 Jy ! Component: 200 - total flux cleaned = 0.0221382 Jy ! Total flux subtracted in 200 components = 0.0221382 Jy ! Clean residual min=-0.003234 max=0.003052 Jy/beam ! Clean residual mean=-0.000004 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.189147 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 52 components and 0.189147 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.209 mas, bmaj=11.53 mas, bpa=6.651 degrees ! Estimated noise=4.24118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446077 Jy ! Component: 100 - total flux cleaned = 0.00708585 Jy ! Component: 150 - total flux cleaned = 0.00886139 Jy ! Component: 200 - total flux cleaned = 0.0101081 Jy ! Total flux subtracted in 200 components = 0.0101081 Jy ! Clean residual min=-0.003274 max=0.003017 Jy/beam ! Clean residual mean=-0.000007 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.199255 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000895458 Jy ! Component: 100 - total flux cleaned = 0.00132538 Jy ! Component: 150 - total flux cleaned = 0.00145693 Jy ! Component: 200 - total flux cleaned = 0.00153439 Jy ! Total flux subtracted in 200 components = 0.00153439 Jy ! Clean residual min=-0.003253 max=0.003082 Jy/beam ! Clean residual mean=-0.000006 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.20079 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 116 components and 0.20079 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=5.706 mas, bpa=-6.324 degrees ! Estimated noise=3.73157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122067 Jy ! Component: 100 - total flux cleaned = 0.000243023 Jy ! Component: 150 - total flux cleaned = 0.000189829 Jy ! Component: 200 - total flux cleaned = 4.19371e-05 Jy ! Total flux subtracted in 200 components = 4.19371e-05 Jy ! Clean residual min=-0.003326 max=0.002461 Jy/beam ! Clean residual mean=-0.000002 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.200832 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 132 components and 0.200832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091585Jy sigma=0.151345 ! Fit after self-cal, rms=0.091566Jy sigma=0.151317 wmodel /scr/pima/rdv72_uvs/J0954+2639_S_map.mod ! Writing 132 model components to file: /scr/pima/rdv72_uvs/J0954+2639_S_map.mod wobs /scr/pima/rdv72_uvs/J0954+2639_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J0954+2639_S_uvs.fits wwins /scr/pima/rdv72_uvs/J0954+2639_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rdv72_uvs/J0954+2639_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011953 Jy ! Component: 100 - total flux cleaned = -0.00128814 Jy ! Component: 150 - total flux cleaned = -0.00133256 Jy ! Component: 200 - total flux cleaned = -0.00141427 Jy ! Component: 250 - total flux cleaned = -0.00141449 Jy ! Component: 300 - total flux cleaned = -0.00130204 Jy ! Component: 350 - total flux cleaned = -0.00108608 Jy ! Component: 400 - total flux cleaned = -0.000982017 Jy ! Component: 450 - total flux cleaned = -0.000981497 Jy ! Component: 500 - total flux cleaned = -0.00101468 Jy ! Component: 550 - total flux cleaned = -0.00101406 Jy ! Component: 600 - total flux cleaned = -0.000948844 Jy ! Component: 650 - total flux cleaned = -0.000792695 Jy ! Component: 700 - total flux cleaned = -0.000701077 Jy ! Component: 750 - total flux cleaned = -0.000701042 Jy ! Component: 800 - total flux cleaned = -0.000523598 Jy ! Component: 850 - total flux cleaned = -0.000493627 Jy ! Component: 900 - total flux cleaned = -0.000379115 Jy ! Component: 950 - total flux cleaned = -0.000294448 Jy ! Component: 1000 - total flux cleaned = -0.000238828 Jy ! Component: 1050 - total flux cleaned = -0.000211356 Jy ! Component: 1100 - total flux cleaned = -0.000183938 Jy ! Component: 1150 - total flux cleaned = -0.000264614 Jy ! Component: 1200 - total flux cleaned = -0.000210335 Jy ! Component: 1250 - total flux cleaned = -0.000236331 Jy ! Component: 1300 - total flux cleaned = -0.000105218 Jy ! Component: 1350 - total flux cleaned = -0.000105425 Jy ! Component: 1400 - total flux cleaned = -5.40829e-05 Jy ! Component: 1450 - total flux cleaned = -5.38431e-05 Jy ! Component: 1500 - total flux cleaned = 7.24173e-05 Jy ! Component: 1550 - total flux cleaned = 0.000122245 Jy ! Component: 1600 - total flux cleaned = 7.24259e-05 Jy ! Component: 1650 - total flux cleaned = 9.72835e-05 Jy ! Component: 1700 - total flux cleaned = 0.000170578 Jy ! Component: 1750 - total flux cleaned = 0.000146315 Jy ! Component: 1800 - total flux cleaned = 0.000242516 Jy ! Component: 1850 - total flux cleaned = 0.000290574 Jy ! Component: 1900 - total flux cleaned = 0.000314303 Jy ! Component: 1950 - total flux cleaned = 0.000361241 Jy ! Component: 2000 - total flux cleaned = 0.000477849 Jy ! Component: 2050 - total flux cleaned = 0.000546982 Jy ! Component: 2100 - total flux cleaned = 0.000638823 Jy ! Component: 2150 - total flux cleaned = 0.000707334 Jy ! Component: 2200 - total flux cleaned = 0.000707256 Jy ! Component: 2250 - total flux cleaned = 0.000819988 Jy ! Component: 2300 - total flux cleaned = 0.000976771 Jy ! Component: 2350 - total flux cleaned = 0.00102121 Jy ! Component: 2400 - total flux cleaned = 0.00113192 Jy ! Component: 2450 - total flux cleaned = 0.00117567 Jy ! Component: 2500 - total flux cleaned = 0.00121918 Jy ! Component: 2550 - total flux cleaned = 0.00126264 Jy ! Component: 2600 - total flux cleaned = 0.00132756 Jy ! Component: 2650 - total flux cleaned = 0.00137038 Jy ! Component: 2700 - total flux cleaned = 0.0014345 Jy ! Component: 2750 - total flux cleaned = 0.00145569 Jy ! Component: 2800 - total flux cleaned = 0.00151902 Jy ! Component: 2850 - total flux cleaned = 0.00151899 Jy ! Component: 2900 - total flux cleaned = 0.0014774 Jy ! Component: 2950 - total flux cleaned = 0.00158143 Jy ! Component: 3000 - total flux cleaned = 0.00164317 Jy ! Component: 3050 - total flux cleaned = 0.00160199 Jy ! Component: 3100 - total flux cleaned = 0.00162254 Jy ! Component: 3150 - total flux cleaned = 0.001826 Jy ! Component: 3200 - total flux cleaned = 0.00182598 Jy ! Component: 3250 - total flux cleaned = 0.00186618 Jy ! Component: 3300 - total flux cleaned = 0.00188637 Jy ! Component: 3350 - total flux cleaned = 0.00194617 Jy ! Component: 3400 - total flux cleaned = 0.00208532 Jy ! Component: 3450 - total flux cleaned = 0.00208525 Jy ! Component: 3500 - total flux cleaned = 0.00222303 Jy ! Component: 3550 - total flux cleaned = 0.00226232 Jy ! Component: 3600 - total flux cleaned = 0.00234056 Jy ! Component: 3650 - total flux cleaned = 0.00239893 Jy ! Component: 3700 - total flux cleaned = 0.00255348 Jy ! Component: 3750 - total flux cleaned = 0.00249569 Jy ! Component: 3800 - total flux cleaned = 0.00249579 Jy ! Component: 3850 - total flux cleaned = 0.00255303 Jy ! Component: 3900 - total flux cleaned = 0.00257203 Jy ! Component: 3950 - total flux cleaned = 0.00261003 Jy ! Component: 4000 - total flux cleaned = 0.00264787 Jy ! Component: 4050 - total flux cleaned = 0.00257252 Jy ! Total flux subtracted in 4096 components = 0.00264752 Jy ! Clean residual min=-0.001204 max=0.001245 Jy/beam ! Clean residual mean=-0.000004 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.203479 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 414 components and 0.203479 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J0954+2639_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.633 x 5.706 at -6.324 degrees (North through East) ! Clean map min=-0.0023722 max=0.15086 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J0954+2639_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.150858 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000322271 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.640877 0.640877 1.28175 2.56351 5.12702 10.254 20.5081 41.0161 82.0323 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.15 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J0954+2639_S_uvs.log closed on Sat Oct 5 08:46:44 2013