! Started logfile: /scr/pima/rdv72_uvs/J0854+2006_X_uvs.log on Sat Oct  5 08:46:18 2013
obs /scr/pima/rdv72_uvs/J0854+2006_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv72_uvs/J0854+2006_X_uva.fits
! AN table 1: 13 integrations on 3 of 3 possible baselines.
! AN table 2: 3 integrations on 1 of 1 possible baselines.
! AN table 3: 2 integrations on 1 of 1 possible baselines.
! AN table 4: 7 integrations on 21 of 21 possible baselines.
! AN table 5: 3 integrations on 15 of 15 possible baselines.
! AN table 6: 6 integrations on 36 of 36 possible baselines.
! AN table 7: 5 integrations on 36 of 36 possible baselines.
! AN table 8: 19 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.754323 visibilities/baseline/integration-bin.
! Found source: J0854+2006
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09      1.6e+07          1      1.6e+07
!  02        2  8.47599e+09      1.6e+07          1      1.6e+07
!  03        3  8.79099e+09      1.6e+07          1      1.6e+07
!  04        4  8.89599e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5060 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J0854+2006_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
!  A total of 17 telescope corrections were flagged in sub-array 4.
!  A total of 13 telescope corrections were flagged in sub-array 6.
!  A total of 6 telescope corrections were flagged in sub-array 7.
!  A total of 34 telescope corrections were flagged in sub-array 8.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
!  A total of 17 telescope corrections were flagged in sub-array 4.
!  A total of 13 telescope corrections were flagged in sub-array 6.
!  A total of 6 telescope corrections were flagged in sub-array 7.
!  A total of 34 telescope corrections were flagged in sub-array 8.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
!  A total of 17 telescope corrections were flagged in sub-array 4.
!  A total of 13 telescope corrections were flagged in sub-array 6.
!  A total of 6 telescope corrections were flagged in sub-array 7.
!  A total of 34 telescope corrections were flagged in sub-array 8.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
!  A total of 17 telescope corrections were flagged in sub-array 4.
!  A total of 13 telescope corrections were flagged in sub-array 6.
!  A total of 6 telescope corrections were flagged in sub-array 7.
!  A total of 34 telescope corrections were flagged in sub-array 8.
! 
! Fit before self-cal, rms=1.907557Jy  sigma=41.319269
! Fit after  self-cal, rms=0.781250Jy  sigma=19.205780
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.597% of the data.
!  The x-axis pixel size should ideally be below 0.185 milli-arcsec
! Estimated beam: bmin=0.6272 mas, bmaj=1.055 mas, bpa=-11.68 degrees
! Estimated noise=0.755327 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.2396 Jy
! Component: 100  -  total flux cleaned = 1.55015 Jy
! Total flux subtracted in 100 components = 1.55015 Jy
! Clean residual min=-0.062767 max=0.129685 Jy/beam
! Clean residual mean=-0.000130 rms=0.015305 Jy/beam
! Combined flux in latest and established models = 1.55015 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 1.55015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.573385Jy  sigma=11.905238
! Fit after  self-cal, rms=0.572452Jy  sigma=11.895454
! Inverting map 
! Your choice of large map pixels excluded 0.597% of the data.
!  The x-axis pixel size should ideally be below 0.185 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141672 Jy
! Component: 100  -  total flux cleaned = 0.220648 Jy
! Total flux subtracted in 100 components = 0.220648 Jy
! Clean residual min=-0.058474 max=0.100439 Jy/beam
! Clean residual mean=-0.000101 rms=0.013093 Jy/beam
! Combined flux in latest and established models = 1.7708 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 1.7708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.560447Jy  sigma=10.090488
! Fit after  self-cal, rms=0.560152Jy  sigma=10.086353
! Inverting map 
! Your choice of large map pixels excluded 0.597% of the data.
!  The x-axis pixel size should ideally be below 0.185 milli-arcsec
! Added new window around map position (-0.6, -3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0875803 Jy
! Component: 100  -  total flux cleaned = 0.135664 Jy
! Total flux subtracted in 100 components = 0.135664 Jy
! Clean residual min=-0.055850 max=0.076011 Jy/beam
! Clean residual mean=-0.000084 rms=0.012157 Jy/beam
! Combined flux in latest and established models = 1.90647 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 1.90647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.558036Jy  sigma=9.458767
! Fit after  self-cal, rms=0.557171Jy  sigma=9.427281
! Inverting map 
! Your choice of large map pixels excluded 0.597% of the data.
!  The x-axis pixel size should ideally be below 0.185 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.597% of the data.
!  The x-axis pixel size should ideally be below 0.185 milli-arcsec
! Estimated beam: bmin=0.7239 mas, bmaj=1.227 mas, bpa=-11.44 degrees
! Estimated noise=0.572585 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0804104 Jy
! Component: 100  -  total flux cleaned = 0.127815 Jy
! Component: 150  -  total flux cleaned = 0.149164 Jy
! Component: 200  -  total flux cleaned = 0.159371 Jy
! Total flux subtracted in 200 components = 0.159371 Jy
! Clean residual min=-0.063346 max=0.078971 Jy/beam
! Clean residual mean=-0.000069 rms=0.016880 Jy/beam
! Combined flux in latest and established models = 2.06584 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 32 components and 2.06584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.570050Jy  sigma=8.751087
! Fit after  self-cal, rms=0.570022Jy  sigma=8.748106
! Inverting map 
! Your choice of large map pixels excluded 0.597% of the data.
!  The x-axis pixel size should ideally be below 0.185 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   NY        0.00*    WZ        0.00*    ZC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   NL        0.00*    NY        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   NY        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.79     LA        0.94     NL        1.11     NY        1.00     
!   SC        0.75     WZ        1.17     ZC        1.64     
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.34     FD        0.76     KP        1.28     LA        0.98     
!   NL        1.12     NY        0.96     
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.31     FD        0.79     KP        1.19     LA        0.95     
!   NL        1.11     NY        0.99     OV        1.02     SC        0.82     
!   WZ        1.14     
! 
!  A total of 3 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.28     FD        0.73     LA        0.94     NL        1.10     
!   NY        0.97     OV        0.99     PT        0.87     SC        0.88     
!   WZ        1.08     
! 
!  A total of 3 telescope corrections were flagged in sub-array 8.
!  Telescope amplitude corrections in sub-array 8:
!   BR        1.27     FD        0.78     KK        1.17     KP        1.97     
!   LA        0.94     MK        0.97     NL        1.04     NY        0.98     
!   OV        1.00     PT        0.90     SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   NY        0.00*    WZ        0.00*    ZC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   NL        0.00*    NY        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   NY        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.80     LA        0.93     NL        1.12     NY        1.01     
!   SC        0.78     WZ        1.18     ZC        1.59     
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.35     FD        0.77     KP        1.24     LA        1.00     
!   NL        1.09     NY        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.25     FD        0.78     KP        1.17     LA        0.96     
!   NL        1.09     NY        1.02     OV        0.98     SC        0.84     
!   WZ        1.14     
! 
!  A total of 3 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.26     FD        0.74     LA        0.94     NL        1.09     
!   NY        1.01     OV        0.98     PT        0.91     SC        0.91     
!   WZ        1.10     
! 
!  A total of 3 telescope corrections were flagged in sub-array 8.
!  Telescope amplitude corrections in sub-array 8:
!   BR        1.25     FD        0.78     KK        1.13     KP        1.81     
!   LA        0.94     MK        0.98     NL        1.05     NY        1.03     
!   OV        0.97     PT        0.95     SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   NY        0.00*    WZ        0.00*    ZC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   NL        0.00*    NY        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   NY        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.77     LA        0.96     NL        1.15     NY        1.08     
!   SC        0.79     WZ        1.21     ZC        1.34     
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.37     FD        0.78     KP        1.16     LA        1.02     
!   NL        1.15     NY        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.31     FD        0.78     KP        1.05     LA        0.98     
!   NL        1.14     NY        1.08     OV        1.03     SC        0.83     
!   WZ        1.18     
! 
!  A total of 3 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.34     FD        0.74     LA        0.97     NL        1.13     
!   NY        1.07     OV        1.00     PT        0.91     SC        0.92     
!   WZ        1.11     
! 
!  A total of 3 telescope corrections were flagged in sub-array 8.
!  Telescope amplitude corrections in sub-array 8:
!   BR        1.30     FD        0.77     KK        1.16     KP        1.75     
!   LA        0.97     MK        0.95     NL        1.08     NY        1.08     
!   OV        1.02     PT        0.94     SC        0.96     
! 
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   NY        0.00*    WZ        0.00*    ZC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   NL        0.00*    NY        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   NY        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.81     LA        0.97     NL        1.17     NY        1.04     
!   SC        0.81     WZ        1.22     ZC        1.41     
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.44     FD        0.80     KP        1.29     LA        1.06     
!   NL        1.17     NY        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.35     FD        0.81     KP        1.18     LA        0.99     
!   NL        1.17     NY        1.06     OV        1.03     SC        0.85     
!   WZ        1.19     
! 
!  A total of 3 telescope corrections were flagged in sub-array 7.
!  Telescope amplitude corrections in sub-array 7:
!   BR        1.32     FD        0.76     LA        0.98     NL        1.20     
!   NY        1.02     OV        1.00     PT        0.90     SC        0.93     
!   WZ        1.12     
! 
!  A total of 3 telescope corrections were flagged in sub-array 8.
!  Telescope amplitude corrections in sub-array 8:
!   BR        1.27     FD        0.80     KK        1.13     KP        1.84     
!   LA        0.98     MK        0.97     NL        1.12     NY        1.09     
!   OV        1.00     PT        0.94     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.570022Jy  sigma=8.748106
! Fit after  self-cal, rms=0.400261Jy  sigma=4.870472
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=0.7321 mas, bmaj=1.237 mas, bpa=-11.31 degrees
! Estimated noise=0.572432 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0416301 Jy
! Component: 100  -  total flux cleaned = -0.062424 Jy
! Component: 150  -  total flux cleaned = -0.073437 Jy
! Component: 200  -  total flux cleaned = -0.0767565 Jy
! Total flux subtracted in 200 components = -0.0767565 Jy
! Clean residual min=-0.021391 max=0.034581 Jy/beam
! Clean residual mean=-0.000017 rms=0.004563 Jy/beam
! Combined flux in latest and established models = 1.98908 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 38 components and 1.98908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.392312Jy  sigma=4.793905
! Fit after  self-cal, rms=0.392032Jy  sigma=4.779751
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Added new window around map position (-1.8, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0249752 Jy
! Component: 100  -  total flux cleaned = 0.0277849 Jy
! Component: 150  -  total flux cleaned = 0.0277512 Jy
! Component: 200  -  total flux cleaned = 0.0273162 Jy
! Total flux subtracted in 200 components = 0.0273162 Jy
! Clean residual min=-0.020173 max=0.017916 Jy/beam
! Clean residual mean=-0.000004 rms=0.004209 Jy/beam
! Combined flux in latest and established models = 2.0164 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 53 components and 2.0164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.389790Jy  sigma=4.704000
! Fit after  self-cal, rms=0.389429Jy  sigma=4.691467
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.389429Jy  sigma=4.691467
! Fit after  self-cal, rms=0.380925Jy  sigma=4.579030
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=0.734 mas, bmaj=1.241 mas, bpa=-11.12 degrees
! Estimated noise=0.569301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0190887 Jy
! Component: 100  -  total flux cleaned = -0.0227098 Jy
! Component: 150  -  total flux cleaned = -0.0250931 Jy
! Component: 200  -  total flux cleaned = -0.0267187 Jy
! Total flux subtracted in 200 components = -0.0267187 Jy
! Clean residual min=-0.016703 max=0.013919 Jy/beam
! Clean residual mean=0.000003 rms=0.003624 Jy/beam
! Combined flux in latest and established models = 1.98968 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 1.98968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.377673Jy  sigma=4.548391
! Fit after  self-cal, rms=0.377475Jy  sigma=4.543567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00041232 Jy
! Component: 100  -  total flux cleaned = -0.00145951 Jy
! Component: 150  -  total flux cleaned = -0.00300758 Jy
! Component: 200  -  total flux cleaned = -0.0043897 Jy
! Total flux subtracted in 200 components = -0.0043897 Jy
! Clean residual min=-0.016768 max=0.013908 Jy/beam
! Clean residual mean=0.000002 rms=0.003571 Jy/beam
! Combined flux in latest and established models = 1.98529 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 1.98529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.376817Jy  sigma=4.533456
! Fit after  self-cal, rms=0.376772Jy  sigma=4.531721
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.376772Jy  sigma=4.531721
! Fit after  self-cal, rms=0.384228Jy  sigma=4.300658
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=0.735 mas, bmaj=1.242 mas, bpa=-10.98 degrees
! Estimated noise=0.567455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0116284 Jy
! Component: 100  -  total flux cleaned = -0.0144271 Jy
! Component: 150  -  total flux cleaned = -0.0152887 Jy
! Component: 200  -  total flux cleaned = -0.0157803 Jy
! Total flux subtracted in 200 components = -0.0157803 Jy
! Clean residual min=-0.012352 max=0.010857 Jy/beam
! Clean residual mean=0.000004 rms=0.002516 Jy/beam
! Combined flux in latest and established models = 1.96951 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 67 components and 1.96951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.383414Jy  sigma=4.288138
! Fit after  self-cal, rms=0.383353Jy  sigma=4.286356
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00098629 Jy
! Component: 100  -  total flux cleaned = -0.00204782 Jy
! Component: 150  -  total flux cleaned = -0.00223492 Jy
! Component: 200  -  total flux cleaned = -0.00258134 Jy
! Total flux subtracted in 200 components = -0.00258134 Jy
! Clean residual min=-0.012061 max=0.010760 Jy/beam
! Clean residual mean=0.000003 rms=0.002485 Jy/beam
! Combined flux in latest and established models = 1.96693 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 74 components and 1.96693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.383107Jy  sigma=4.282522
! Fit after  self-cal, rms=0.383088Jy  sigma=4.282008
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.383088Jy  sigma=4.282008
! Fit after  self-cal, rms=0.383705Jy  sigma=4.271164
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=2.431 mas, bmaj=3.039 mas, bpa=20.87 degrees
! Estimated noise=0.732021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00961701 Jy
! Component: 100  -  total flux cleaned = -0.0121178 Jy
! Component: 150  -  total flux cleaned = -0.0128677 Jy
! Component: 200  -  total flux cleaned = -0.0136417 Jy
! Total flux subtracted in 200 components = -0.0136417 Jy
! Clean residual min=-0.015206 max=0.018624 Jy/beam
! Clean residual mean=0.000010 rms=0.004620 Jy/beam
! Combined flux in latest and established models = 1.95329 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 82 components and 1.95329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.383380Jy  sigma=4.271541
! Fit after  self-cal, rms=0.383331Jy  sigma=4.269760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000506903 Jy
! Component: 100  -  total flux cleaned = -0.00100042 Jy
! Component: 150  -  total flux cleaned = -0.00142215 Jy
! Component: 200  -  total flux cleaned = -0.00179349 Jy
! Total flux subtracted in 200 components = -0.00179349 Jy
! Clean residual min=-0.015463 max=0.018511 Jy/beam
! Clean residual mean=0.000007 rms=0.004588 Jy/beam
! Combined flux in latest and established models = 1.95149 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 84 components and 1.95149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.383227Jy  sigma=4.269099
! Fit after  self-cal, rms=0.383228Jy  sigma=4.268509
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=0.7356 mas, bmaj=1.244 mas, bpa=-10.86 degrees
! Estimated noise=0.565766 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7356 x 1.244 at -10.86 degrees (North through East)
! Clean map  min=-0.010815  max=1.6177 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.383228Jy  sigma=4.268509
! Fit after  self-cal, rms=0.527984Jy  sigma=2.153154
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=0.7342 mas, bmaj=1.247 mas, bpa=-10.97 degrees
! Estimated noise=0.56588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237667 Jy
! Component: 100  -  total flux cleaned = 0.00282194 Jy
! Component: 150  -  total flux cleaned = 0.00302021 Jy
! Component: 200  -  total flux cleaned = 0.00319367 Jy
! Total flux subtracted in 200 components = 0.00319367 Jy
! Clean residual min=-0.007407 max=0.007839 Jy/beam
! Clean residual mean=-0.000001 rms=0.001569 Jy/beam
! Combined flux in latest and established models = 1.95469 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 93 components and 1.95469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.527623Jy  sigma=2.140380
! Fit after  self-cal, rms=0.527652Jy  sigma=2.139166
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Added new window around map position (-5, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00762962 Jy
! Component: 100  -  total flux cleaned = 0.00931412 Jy
! Component: 150  -  total flux cleaned = 0.00966108 Jy
! Component: 200  -  total flux cleaned = 0.0101229 Jy
! Total flux subtracted in 200 components = 0.0101229 Jy
! Clean residual min=-0.006688 max=0.007026 Jy/beam
! Clean residual mean=0.000002 rms=0.001505 Jy/beam
! Combined flux in latest and established models = 1.96481 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 110 components and 1.96481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.527338Jy  sigma=2.128050
! Fit after  self-cal, rms=0.527356Jy  sigma=2.126109
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Added new window around map position (-0.2, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00456527 Jy
! Component: 100  -  total flux cleaned = 0.00656387 Jy
! Component: 150  -  total flux cleaned = 0.00780141 Jy
! Component: 200  -  total flux cleaned = 0.00821915 Jy
! Total flux subtracted in 200 components = 0.00821915 Jy
! Clean residual min=-0.006173 max=0.006501 Jy/beam
! Clean residual mean=0.000005 rms=0.001454 Jy/beam
! Combined flux in latest and established models = 1.97303 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 125 components and 1.97303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.527056Jy  sigma=2.116831
! Fit after  self-cal, rms=0.527077Jy  sigma=2.115941
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Added new window around map position (-19, -12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0056602 Jy
! Component: 100  -  total flux cleaned = 0.00828133 Jy
! Component: 150  -  total flux cleaned = 0.00977291 Jy
! Component: 200  -  total flux cleaned = 0.0103941 Jy
! Total flux subtracted in 200 components = 0.0103941 Jy
! Clean residual min=-0.005879 max=0.005965 Jy/beam
! Clean residual mean=0.000005 rms=0.001402 Jy/beam
! Combined flux in latest and established models = 1.98342 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 135 components and 1.98342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.526930Jy  sigma=2.108758
! Fit after  self-cal, rms=0.526917Jy  sigma=2.108325
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Added new window around map position (18.4, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00521034 Jy
! Component: 100  -  total flux cleaned = 0.00674653 Jy
! Component: 150  -  total flux cleaned = 0.00756554 Jy
! Component: 200  -  total flux cleaned = 0.00778555 Jy
! Total flux subtracted in 200 components = 0.00778555 Jy
! Clean residual min=-0.005882 max=0.005537 Jy/beam
! Clean residual mean=0.000003 rms=0.001384 Jy/beam
! Combined flux in latest and established models = 1.99121 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 144 components and 1.99121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.526700Jy  sigma=2.104183
! Fit after  self-cal, rms=0.526734Jy  sigma=2.103699
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.526734Jy  sigma=2.103699
! Fit after  self-cal, rms=0.526545Jy  sigma=2.095629
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=0.6291 mas, bmaj=1.059 mas, bpa=-11.73 degrees
! Estimated noise=0.769374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.24993 Jy
! Component: 100  -  total flux cleaned = 1.55939 Jy
! Component: 150  -  total flux cleaned = 1.69399 Jy
! Component: 200  -  total flux cleaned = 1.76596 Jy
! Total flux subtracted in 200 components = 1.76596 Jy
! Clean residual min=-0.013749 max=0.038115 Jy/beam
! Clean residual mean=-0.000034 rms=0.003364 Jy/beam
! Combined flux in latest and established models = 1.76596 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.76596 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=0.7339 mas, bmaj=1.248 mas, bpa=-10.92 degrees
! Estimated noise=0.565917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0696696 Jy
! Component: 100  -  total flux cleaned = 0.110175 Jy
! Component: 150  -  total flux cleaned = 0.135305 Jy
! Component: 200  -  total flux cleaned = 0.152593 Jy
! Total flux subtracted in 200 components = 0.152593 Jy
! Clean residual min=-0.009215 max=0.010295 Jy/beam
! Clean residual mean=-0.000019 rms=0.002161 Jy/beam
! Combined flux in latest and established models = 1.91855 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 56 components and 1.91855 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Added new window around map position (0.6, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130812 Jy
! Component: 100  -  total flux cleaned = 0.0235017 Jy
! Component: 150  -  total flux cleaned = 0.0323031 Jy
! Component: 200  -  total flux cleaned = 0.0399979 Jy
! Total flux subtracted in 200 components = 0.0399979 Jy
! Clean residual min=-0.006931 max=0.007088 Jy/beam
! Clean residual mean=-0.000007 rms=0.001587 Jy/beam
! Combined flux in latest and established models = 1.95855 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 98 components and 1.95855 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Added new window around map position (6.2, -10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0073841 Jy
! Component: 100  -  total flux cleaned = 0.0132155 Jy
! Component: 150  -  total flux cleaned = 0.0175812 Jy
! Component: 200  -  total flux cleaned = 0.0215382 Jy
! Total flux subtracted in 200 components = 0.0215382 Jy
! Clean residual min=-0.006170 max=0.005839 Jy/beam
! Clean residual mean=-0.000003 rms=0.001426 Jy/beam
! Combined flux in latest and established models = 1.98008 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 121 components and 1.98009 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=2.427 mas, bmaj=3.046 mas, bpa=20.7 degrees
! Estimated noise=0.733388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00748998 Jy
! Component: 100  -  total flux cleaned = 0.0123183 Jy
! Component: 150  -  total flux cleaned = 0.0150104 Jy
! Component: 200  -  total flux cleaned = 0.0172594 Jy
! Total flux subtracted in 200 components = 0.0172594 Jy
! Clean residual min=-0.007365 max=0.008123 Jy/beam
! Clean residual mean=0.000005 rms=0.002013 Jy/beam
! Combined flux in latest and established models = 1.99734 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140809 Jy
! Component: 100  -  total flux cleaned = 0.0025852 Jy
! Component: 150  -  total flux cleaned = 0.00356469 Jy
! Component: 200  -  total flux cleaned = 0.00428118 Jy
! Total flux subtracted in 200 components = 0.00428118 Jy
! Clean residual min=-0.006912 max=0.007837 Jy/beam
! Clean residual mean=0.000007 rms=0.001944 Jy/beam
! Combined flux in latest and established models = 2.00163 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 161 components and 2.00163 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! Estimated beam: bmin=0.7339 mas, bmaj=1.248 mas, bpa=-10.92 degrees
! Estimated noise=0.565917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118374 Jy
! Component: 100  -  total flux cleaned = 0.00160836 Jy
! Component: 150  -  total flux cleaned = 0.00161658 Jy
! Component: 200  -  total flux cleaned = 0.00149932 Jy
! Total flux subtracted in 200 components = 0.00149932 Jy
! Clean residual min=-0.006268 max=0.005556 Jy/beam
! Clean residual mean=0.000003 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 2.00313 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 182 components and 2.00312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.526041Jy  sigma=2.091257
! Fit after  self-cal, rms=0.525954Jy  sigma=2.086331
wmodel /scr/pima/rdv72_uvs/J0854+2006_X_map.mod
! Writing 182 model components to file: /scr/pima/rdv72_uvs/J0854+2006_X_map.mod
wobs /scr/pima/rdv72_uvs/J0854+2006_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv72_uvs/J0854+2006_X_uvs.fits
wwins /scr/pima/rdv72_uvs/J0854+2006_X_map.win
! wwins: Wrote 10 windows to /scr/pima/rdv72_uvs/J0854+2006_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000343178 Jy
! Component: 100  -  total flux cleaned = -0.00043965 Jy
! Component: 150  -  total flux cleaned = -0.000728178 Jy
! Component: 200  -  total flux cleaned = -0.00109997 Jy
! Component: 250  -  total flux cleaned = -0.00155259 Jy
! Component: 300  -  total flux cleaned = -0.0019947 Jy
! Component: 350  -  total flux cleaned = -0.00190634 Jy
! Component: 400  -  total flux cleaned = -0.00224938 Jy
! Component: 450  -  total flux cleaned = -0.00224961 Jy
! Component: 500  -  total flux cleaned = -0.00241668 Jy
! Component: 550  -  total flux cleaned = -0.0024995 Jy
! Component: 600  -  total flux cleaned = -0.00274244 Jy
! Component: 650  -  total flux cleaned = -0.00266204 Jy
! Component: 700  -  total flux cleaned = -0.00297887 Jy
! Component: 750  -  total flux cleaned = -0.00305717 Jy
! Component: 800  -  total flux cleaned = -0.00305816 Jy
! Component: 850  -  total flux cleaned = -0.00344351 Jy
! Component: 900  -  total flux cleaned = -0.00344285 Jy
! Component: 950  -  total flux cleaned = -0.00351961 Jy
! Component: 1000  -  total flux cleaned = -0.00381922 Jy
! Component: 1050  -  total flux cleaned = -0.00381907 Jy
! Component: 1100  -  total flux cleaned = -0.00367162 Jy
! Component: 1150  -  total flux cleaned = -0.00403843 Jy
! Component: 1200  -  total flux cleaned = -0.00418409 Jy
! Component: 1250  -  total flux cleaned = -0.0041835 Jy
! Component: 1300  -  total flux cleaned = -0.00432708 Jy
! Component: 1350  -  total flux cleaned = -0.00439856 Jy
! Component: 1400  -  total flux cleaned = -0.00446867 Jy
! Component: 1450  -  total flux cleaned = -0.00467953 Jy
! Component: 1500  -  total flux cleaned = -0.00453999 Jy
! Component: 1550  -  total flux cleaned = -0.00481703 Jy
! Component: 1600  -  total flux cleaned = -0.00467907 Jy
! Component: 1650  -  total flux cleaned = -0.0048846 Jy
! Component: 1700  -  total flux cleaned = -0.0048844 Jy
! Component: 1750  -  total flux cleaned = -0.00501914 Jy
! Component: 1800  -  total flux cleaned = -0.00488417 Jy
! Component: 1850  -  total flux cleaned = -0.00495117 Jy
! Component: 1900  -  total flux cleaned = -0.00508411 Jy
! Component: 1950  -  total flux cleaned = -0.00501736 Jy
! Component: 2000  -  total flux cleaned = -0.00501735 Jy
! Component: 2050  -  total flux cleaned = -0.004952 Jy
! Component: 2100  -  total flux cleaned = -0.00508259 Jy
! Component: 2150  -  total flux cleaned = -0.00534233 Jy
! Component: 2200  -  total flux cleaned = -0.00547184 Jy
! Component: 2250  -  total flux cleaned = -0.00572843 Jy
! Component: 2300  -  total flux cleaned = -0.0055366 Jy
! Component: 2350  -  total flux cleaned = -0.00560015 Jy
! Component: 2400  -  total flux cleaned = -0.00591654 Jy
! Component: 2450  -  total flux cleaned = -0.0059793 Jy
! Component: 2500  -  total flux cleaned = -0.0060417 Jy
! Component: 2550  -  total flux cleaned = -0.0061664 Jy
! Component: 2600  -  total flux cleaned = -0.00635247 Jy
! Component: 2650  -  total flux cleaned = -0.00635248 Jy
! Component: 2700  -  total flux cleaned = -0.00659851 Jy
! Component: 2750  -  total flux cleaned = -0.00702792 Jy
! Component: 2800  -  total flux cleaned = -0.00684496 Jy
! Component: 2850  -  total flux cleaned = -0.00714861 Jy
! Component: 2900  -  total flux cleaned = -0.00714856 Jy
! Component: 2950  -  total flux cleaned = -0.00732959 Jy
! Component: 3000  -  total flux cleaned = -0.00744969 Jy
! Component: 3050  -  total flux cleaned = -0.00774851 Jy
! Component: 3100  -  total flux cleaned = -0.00768867 Jy
! Component: 3150  -  total flux cleaned = -0.0077477 Jy
! Component: 3200  -  total flux cleaned = -0.00780688 Jy
! Component: 3250  -  total flux cleaned = -0.00845372 Jy
! Component: 3300  -  total flux cleaned = -0.00804277 Jy
! Component: 3350  -  total flux cleaned = -0.00821783 Jy
! Component: 3400  -  total flux cleaned = -0.00839231 Jy
! Component: 3450  -  total flux cleaned = -0.00856645 Jy
! Component: 3500  -  total flux cleaned = -0.00879724 Jy
! Component: 3550  -  total flux cleaned = -0.00896936 Jy
! Component: 3600  -  total flux cleaned = -0.00896903 Jy
! Component: 3650  -  total flux cleaned = -0.00885502 Jy
! Component: 3700  -  total flux cleaned = -0.0093664 Jy
! Component: 3750  -  total flux cleaned = -0.00936702 Jy
! Component: 3800  -  total flux cleaned = -0.0092541 Jy
! Component: 3850  -  total flux cleaned = -0.00925472 Jy
! Component: 3900  -  total flux cleaned = -0.0095901 Jy
! Component: 3950  -  total flux cleaned = -0.0097018 Jy
! Component: 4000  -  total flux cleaned = -0.00997948 Jy
! Component: 4050  -  total flux cleaned = -0.00997917 Jy
! Total flux subtracted in 4096 components = -0.00992396 Jy
! Clean residual min=-0.004042 max=0.002808 Jy/beam
! Clean residual mean=0.000003 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 1.9932 Jy
keep
! Adding 334 model components to the UV plane model.
! The established model now contains 516 components and 1.9932 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv72_uvs/J0854+2006_X\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7339 x 1.248 at -10.92 degrees (North through East)
! Clean map  min=-0.0048205  max=1.6153 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J0854+2006_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.61526 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.539% of the data.
!  The x-axis pixel size should ideally be below 0.1851 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000947916 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.176055 0.176055 0.352109 0.704219 1.40844 2.81687 5.63375 11.2675 22.535 45.07 90.14
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0028 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.615 
quit
! Quitting program
! Log file /scr/pima/rdv72_uvs/J0854+2006_X_uvs.log closed on Sat Oct  5 08:46:23 2013