! Started logfile: /scr/pima/rdv72_uvs/J0841+7053_X_uvs.log on Sat Oct 5 08:46:12 2013 obs /scr/pima/rdv72_uvs/J0841+7053_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J0841+7053_X_uva.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! AN table 2: 3 integrations on 36 of 36 possible baselines. ! AN table 3: 4 integrations on 28 of 28 possible baselines. ! AN table 4: 7 integrations on 45 of 45 possible baselines. ! AN table 5: 18 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.841959 visibilities/baseline/integration-bin. ! Found source: J0841+7053 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7288 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J0841+7053_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.231524Jy sigma=11.777571 ! Fit after self-cal, rms=0.532410Jy sigma=3.345918 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.6254 mas, bmaj=0.6809 mas, bpa=-18.32 degrees ! Estimated noise=1.76213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.522346 Jy ! Component: 100 - total flux cleaned = 0.699932 Jy ! Total flux subtracted in 100 components = 0.699932 Jy ! Clean residual min=-0.040969 max=0.139910 Jy/beam ! Clean residual mean=-0.000010 rms=0.009815 Jy/beam ! Combined flux in latest and established models = 0.699932 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.699932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318424Jy sigma=3.648318 ! Fit after self-cal, rms=0.319068Jy sigma=3.646864 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-1.2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125981 Jy ! Component: 100 - total flux cleaned = 0.198256 Jy ! Total flux subtracted in 100 components = 0.198256 Jy ! Clean residual min=-0.031148 max=0.089804 Jy/beam ! Clean residual mean=-0.000004 rms=0.007529 Jy/beam ! Combined flux in latest and established models = 0.898188 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.898188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276089Jy sigma=2.802557 ! Fit after self-cal, rms=0.264768Jy sigma=2.751828 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0656774 Jy ! Component: 100 - total flux cleaned = 0.106535 Jy ! Total flux subtracted in 100 components = 0.106535 Jy ! Clean residual min=-0.024671 max=0.056729 Jy/beam ! Clean residual mean=-0.000001 rms=0.006272 Jy/beam ! Combined flux in latest and established models = 1.00472 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 1.00472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253536Jy sigma=2.382102 ! Fit after self-cal, rms=0.249240Jy sigma=2.364251 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (1, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461587 Jy ! Component: 100 - total flux cleaned = 0.0784142 Jy ! Total flux subtracted in 100 components = 0.0784142 Jy ! Clean residual min=-0.024440 max=0.033454 Jy/beam ! Clean residual mean=0.000000 rms=0.005594 Jy/beam ! Combined flux in latest and established models = 1.08314 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 1.08314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243519Jy sigma=2.149336 ! Fit after self-cal, rms=0.243888Jy sigma=2.147818 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.7733 mas, bmaj=0.8311 mas, bpa=-3.248 degrees ! Estimated noise=1.14591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510313 Jy ! Component: 100 - total flux cleaned = 0.0843329 Jy ! Component: 150 - total flux cleaned = 0.106807 Jy ! Component: 200 - total flux cleaned = 0.122126 Jy ! Total flux subtracted in 200 components = 0.122126 Jy ! Clean residual min=-0.027954 max=0.041070 Jy/beam ! Clean residual mean=-0.000023 rms=0.008109 Jy/beam ! Combined flux in latest and established models = 1.20526 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 59 components and 1.20526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245344Jy sigma=1.926385 ! Fit after self-cal, rms=0.245284Jy sigma=1.925542 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.45 FD 0.86 KP 0.93 LA 0.89 ! MK 0.98 NL 1.12 NY 1.03 OV 1.12 ! PT 0.85 ZC 1.67 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.57 FD 0.80 KK 1.23 KP 1.04 ! LA 0.94 NL 1.09 OV 1.08 PT 0.99 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.63 FD 0.89 KP 1.01 LA 0.95 ! NL 1.07 NY 1.14 OV 0.99 PT 0.88 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.28 FD 0.86 KK 1.40 LA 1.03 ! MK 1.04 NL 1.04 NY 1.08 OV 1.14 ! SC 0.76 WZ 1.18 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.34 FD 0.78 KK 1.19 KP 1.35 ! LA 0.94 MK 0.95 NL 1.05 NY 0.95 ! OV 0.97 PT 0.89 SC 0.85 WZ 1.11 ! ZC 1.31 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 0.87 KP 0.89 LA 0.87 ! MK 0.98 NL 1.14 NY 1.13 OV 1.14 ! PT 0.90 ZC 1.68 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.42 FD 0.81 KK 1.17 KP 1.00 ! LA 0.91 NL 1.10 OV 1.08 PT 1.01 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.73 FD 0.85 KP 1.00 LA 0.96 ! NL 1.09 NY 1.15 OV 1.01 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.16 FD 0.87 KK 1.27 LA 1.01 ! MK 1.06 NL 1.03 NY 1.05 OV 1.09 ! SC 0.83 WZ 1.21 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.28 FD 0.79 KK 1.11 KP 1.31 ! LA 0.94 MK 0.97 NL 1.04 NY 0.97 ! OV 0.97 PT 0.93 SC 0.89 WZ 1.10 ! ZC 1.26 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.86 KP 0.84 LA 0.92 ! MK 0.96 NL 1.16 NY 1.07 OV 1.17 ! PT 0.92 ZC 1.43 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.66 FD 0.83 KK 1.14 KP 0.90 ! LA 0.98 NL 1.13 OV 1.10 PT 1.03 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.64 FD 0.84 KP 0.91 LA 1.02 ! NL 1.12 NY 1.24 OV 1.06 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.28 FD 0.85 KK 1.38 LA 1.05 ! MK 1.07 NL 1.07 NY 1.06 OV 1.13 ! SC 0.81 WZ 1.25 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.40 FD 0.78 KK 1.16 KP 1.29 ! LA 0.98 MK 0.97 NL 1.09 NY 0.98 ! OV 1.01 PT 0.96 SC 0.91 WZ 1.17 ! ZC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 0.92 KP 0.90 LA 0.92 ! MK 1.00 NL 1.22 NY 1.05 OV 1.23 ! PT 0.93 ZC 1.53 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.55 FD 0.83 KK 1.07 KP 0.98 ! LA 1.02 NL 1.15 OV 1.11 PT 1.05 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.67 FD 0.84 KP 1.00 LA 1.05 ! NL 1.22 NY 1.14 OV 1.05 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.26 FD 0.87 KK 1.31 LA 1.07 ! MK 1.09 NL 1.10 NY 1.09 OV 1.14 ! SC 0.85 WZ 1.24 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.38 FD 0.82 KK 1.15 KP 1.43 ! LA 1.01 MK 1.02 NL 1.14 NY 0.99 ! OV 1.00 PT 0.96 SC 0.91 WZ 1.17 ! ZC 1.09 ! ! ! Fit before self-cal, rms=0.245284Jy sigma=1.925542 ! Fit after self-cal, rms=0.208471Jy sigma=1.155259 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.7928 mas, bmaj=0.8423 mas, bpa=2.626 degrees ! Estimated noise=1.16878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.8, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016429 Jy ! Component: 100 - total flux cleaned = 0.0163956 Jy ! Component: 150 - total flux cleaned = 0.0158949 Jy ! Component: 200 - total flux cleaned = 0.0150755 Jy ! Total flux subtracted in 200 components = 0.0150755 Jy ! Clean residual min=-0.012169 max=0.020004 Jy/beam ! Clean residual mean=0.000036 rms=0.003218 Jy/beam ! Combined flux in latest and established models = 1.22034 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 1.22034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203533Jy sigma=1.098439 ! Fit after self-cal, rms=0.203295Jy sigma=1.090460 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-2.6, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191482 Jy ! Component: 100 - total flux cleaned = 0.0208883 Jy ! Component: 150 - total flux cleaned = 0.0216323 Jy ! Component: 200 - total flux cleaned = 0.0225944 Jy ! Total flux subtracted in 200 components = 0.0225944 Jy ! Clean residual min=-0.011516 max=0.013134 Jy/beam ! Clean residual mean=0.000031 rms=0.002916 Jy/beam ! Combined flux in latest and established models = 1.24293 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 1.24293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200672Jy sigma=1.061464 ! Fit after self-cal, rms=0.200038Jy sigma=1.057684 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200038Jy sigma=1.057684 ! Fit after self-cal, rms=0.210290Jy sigma=1.023654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.7911 mas, bmaj=0.8438 mas, bpa=1.07 degrees ! Estimated noise=1.16049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152739 Jy ! Component: 100 - total flux cleaned = 0.000631121 Jy ! Component: 150 - total flux cleaned = 0.00139583 Jy ! Component: 200 - total flux cleaned = 0.00186175 Jy ! Total flux subtracted in 200 components = 0.00186175 Jy ! Clean residual min=-0.009029 max=0.013566 Jy/beam ! Clean residual mean=0.000020 rms=0.002439 Jy/beam ! Combined flux in latest and established models = 1.24479 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 1.24479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209294Jy sigma=1.012313 ! Fit after self-cal, rms=0.208811Jy sigma=1.010514 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.2, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144208 Jy ! Component: 100 - total flux cleaned = 0.0189751 Jy ! Component: 150 - total flux cleaned = 0.0216436 Jy ! Component: 200 - total flux cleaned = 0.0238723 Jy ! Total flux subtracted in 200 components = 0.0238723 Jy ! Clean residual min=-0.009287 max=0.010904 Jy/beam ! Clean residual mean=0.000016 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 1.26867 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 119 components and 1.26867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207903Jy sigma=0.986188 ! Fit after self-cal, rms=0.207421Jy sigma=0.982515 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-1.8, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00864972 Jy ! Component: 100 - total flux cleaned = 0.0100691 Jy ! Component: 150 - total flux cleaned = 0.0107837 Jy ! Component: 200 - total flux cleaned = 0.0109943 Jy ! Total flux subtracted in 200 components = 0.0109943 Jy ! Clean residual min=-0.008303 max=0.009676 Jy/beam ! Clean residual mean=0.000016 rms=0.001963 Jy/beam ! Combined flux in latest and established models = 1.27966 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 130 components and 1.27966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206438Jy sigma=0.970899 ! Fit after self-cal, rms=0.205950Jy sigma=0.969043 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-7, -15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764954 Jy ! Component: 100 - total flux cleaned = 0.0106286 Jy ! Component: 150 - total flux cleaned = 0.0130484 Jy ! Component: 200 - total flux cleaned = 0.0148038 Jy ! Total flux subtracted in 200 components = 0.0148038 Jy ! Clean residual min=-0.008287 max=0.008507 Jy/beam ! Clean residual mean=0.000016 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 1.29447 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 143 components and 1.29447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205277Jy sigma=0.957134 ! Fit after self-cal, rms=0.204894Jy sigma=0.955316 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (17.8, 35.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00713796 Jy ! Component: 100 - total flux cleaned = 0.0106566 Jy ! Component: 150 - total flux cleaned = 0.0134184 Jy ! Component: 200 - total flux cleaned = 0.015713 Jy ! Total flux subtracted in 200 components = 0.015713 Jy ! Clean residual min=-0.008539 max=0.007205 Jy/beam ! Clean residual mean=0.000017 rms=0.001649 Jy/beam ! Combined flux in latest and established models = 1.31018 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 157 components and 1.31018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204372Jy sigma=0.946285 ! Fit after self-cal, rms=0.204071Jy sigma=0.945267 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204071Jy sigma=0.945267 ! Fit after self-cal, rms=0.203595Jy sigma=0.937054 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.7922 mas, bmaj=0.8458 mas, bpa=1.708 degrees ! Estimated noise=1.15724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168587 Jy ! Component: 100 - total flux cleaned = 0.00277821 Jy ! Component: 150 - total flux cleaned = 0.00492518 Jy ! Component: 200 - total flux cleaned = 0.00667136 Jy ! Total flux subtracted in 200 components = 0.00667136 Jy ! Clean residual min=-0.006698 max=0.006392 Jy/beam ! Clean residual mean=0.000010 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 1.31685 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 166 components and 1.31685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203066Jy sigma=0.929703 ! Fit after self-cal, rms=0.202763Jy sigma=0.928565 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135941 Jy ! Component: 100 - total flux cleaned = 0.00223716 Jy ! Component: 150 - total flux cleaned = 0.00380233 Jy ! Component: 200 - total flux cleaned = 0.00510563 Jy ! Total flux subtracted in 200 components = 0.00510563 Jy ! Clean residual min=-0.006532 max=0.006054 Jy/beam ! Clean residual mean=0.000009 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 1.32196 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 170 components and 1.32196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202390Jy sigma=0.924586 ! Fit after self-cal, rms=0.202175Jy sigma=0.923834 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202175Jy sigma=0.923834 ! Fit after self-cal, rms=0.201704Jy sigma=0.922648 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=2.671 mas, bmaj=3.377 mas, bpa=27.91 degrees ! Estimated noise=1.35474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252515 Jy ! Component: 100 - total flux cleaned = 0.00554544 Jy ! Component: 150 - total flux cleaned = 0.0079884 Jy ! Component: 200 - total flux cleaned = 0.0100072 Jy ! Total flux subtracted in 200 components = 0.0100072 Jy ! Clean residual min=-0.007038 max=0.007284 Jy/beam ! Clean residual mean=0.000016 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 1.33196 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 178 components and 1.33196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201790Jy sigma=0.919322 ! Fit after self-cal, rms=0.201524Jy sigma=0.917643 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0007354 Jy ! Component: 100 - total flux cleaned = 0.00271471 Jy ! Component: 150 - total flux cleaned = 0.00435556 Jy ! Component: 200 - total flux cleaned = 0.00565511 Jy ! Total flux subtracted in 200 components = 0.00565511 Jy ! Clean residual min=-0.006900 max=0.006760 Jy/beam ! Clean residual mean=0.000012 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 1.33762 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 184 components and 1.33762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201531Jy sigma=0.916911 ! Fit after self-cal, rms=0.201366Jy sigma=0.916124 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.7927 mas, bmaj=0.8464 mas, bpa=2.13 degrees ! Estimated noise=1.15425 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7927 x 0.8464 at 2.13 degrees (North through East) ! Clean map min=-0.0058883 max=0.62577 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201366Jy sigma=0.916124 ! Fit after self-cal, rms=0.839214Jy sigma=0.736236 ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.793 mas, bmaj=0.8466 mas, bpa=1.372 degrees ! Estimated noise=1.1553 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150655 Jy ! Component: 100 - total flux cleaned = -0.0011601 Jy ! Component: 150 - total flux cleaned = -0.000582858 Jy ! Component: 200 - total flux cleaned = -0.000319566 Jy ! Total flux subtracted in 200 components = -0.000319566 Jy ! Clean residual min=-0.005985 max=0.006120 Jy/beam ! Clean residual mean=0.000006 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 1.3373 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 193 components and 1.3373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.839127Jy sigma=0.732471 ! Fit after self-cal, rms=0.839007Jy sigma=0.731554 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-3, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341534 Jy ! Component: 100 - total flux cleaned = 0.00391423 Jy ! Component: 150 - total flux cleaned = 0.00418004 Jy ! Component: 200 - total flux cleaned = 0.00441754 Jy ! Total flux subtracted in 200 components = 0.00441754 Jy ! Clean residual min=-0.005820 max=0.005369 Jy/beam ! Clean residual mean=0.000004 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 1.34172 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 202 components and 1.34171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.838896Jy sigma=0.727951 ! Fit after self-cal, rms=0.838849Jy sigma=0.727375 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.838849Jy sigma=0.727375 ! Fit after self-cal, rms=0.871728Jy sigma=0.726853 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.6432 mas, bmaj=0.6852 mas, bpa=-19.76 degrees ! Estimated noise=1.84245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.54498 Jy ! Component: 100 - total flux cleaned = 0.753764 Jy ! Component: 150 - total flux cleaned = 0.870761 Jy ! Component: 200 - total flux cleaned = 0.944079 Jy ! Total flux subtracted in 200 components = 0.944079 Jy ! Clean residual min=-0.015562 max=0.040243 Jy/beam ! Clean residual mean=-0.000002 rms=0.004242 Jy/beam ! Combined flux in latest and established models = 0.944079 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.944079 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.7937 mas, bmaj=0.847 mas, bpa=2.094 degrees ! Estimated noise=1.15462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0800106 Jy ! Component: 100 - total flux cleaned = 0.130896 Jy ! Component: 150 - total flux cleaned = 0.16921 Jy ! Component: 200 - total flux cleaned = 0.199997 Jy ! Total flux subtracted in 200 components = 0.199997 Jy ! Clean residual min=-0.012842 max=0.021152 Jy/beam ! Clean residual mean=0.000012 rms=0.003815 Jy/beam ! Combined flux in latest and established models = 1.14408 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 89 components and 1.14408 Jy ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-0.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257049 Jy ! Component: 100 - total flux cleaned = 0.0467817 Jy ! Component: 150 - total flux cleaned = 0.0643844 Jy ! Component: 200 - total flux cleaned = 0.0794614 Jy ! Total flux subtracted in 200 components = 0.0794614 Jy ! Clean residual min=-0.008404 max=0.011008 Jy/beam ! Clean residual mean=0.000008 rms=0.002333 Jy/beam ! Combined flux in latest and established models = 1.22354 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 127 components and 1.22354 Jy ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-8, -13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134267 Jy ! Component: 100 - total flux cleaned = 0.0248373 Jy ! Component: 150 - total flux cleaned = 0.034766 Jy ! Component: 200 - total flux cleaned = 0.0434702 Jy ! Total flux subtracted in 200 components = 0.0434702 Jy ! Clean residual min=-0.006821 max=0.007529 Jy/beam ! Clean residual mean=0.000006 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 1.26701 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 163 components and 1.26701 Jy ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-4.8, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00831276 Jy ! Component: 100 - total flux cleaned = 0.0153658 Jy ! Component: 150 - total flux cleaned = 0.021721 Jy ! Component: 200 - total flux cleaned = 0.0274697 Jy ! Total flux subtracted in 200 components = 0.0274697 Jy ! Clean residual min=-0.005832 max=0.005579 Jy/beam ! Clean residual mean=0.000005 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 1.29448 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 196 components and 1.29448 Jy ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=2.673 mas, bmaj=3.385 mas, bpa=27.94 degrees ! Estimated noise=1.35193 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010555 Jy ! Component: 100 - total flux cleaned = 0.0183758 Jy ! Component: 150 - total flux cleaned = 0.0245376 Jy ! Component: 200 - total flux cleaned = 0.0294827 Jy ! Total flux subtracted in 200 components = 0.0294827 Jy ! Clean residual min=-0.005949 max=0.006181 Jy/beam ! Clean residual mean=0.000009 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 1.32396 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401619 Jy ! Component: 100 - total flux cleaned = 0.00730369 Jy ! Component: 150 - total flux cleaned = 0.0100303 Jy ! Component: 200 - total flux cleaned = 0.0123098 Jy ! Total flux subtracted in 200 components = 0.0123098 Jy ! Clean residual min=-0.005806 max=0.006073 Jy/beam ! Clean residual mean=0.000009 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 1.33627 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 255 components and 1.33627 Jy ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.7937 mas, bmaj=0.847 mas, bpa=2.094 degrees ! Estimated noise=1.15462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633223 Jy ! Component: 100 - total flux cleaned = 0.00094717 Jy ! Component: 150 - total flux cleaned = 0.00134342 Jy ! Component: 200 - total flux cleaned = 0.00171625 Jy ! Total flux subtracted in 200 components = 0.00171625 Jy ! Clean residual min=-0.005448 max=0.005449 Jy/beam ! Clean residual mean=0.000003 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 1.33799 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 277 components and 1.33799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.871534Jy sigma=0.717792 ! Fit after self-cal, rms=0.870975Jy sigma=0.715091 wmodel /scr/pima/rdv72_uvs/J0841+7053_X_map.mod ! Writing 277 model components to file: /scr/pima/rdv72_uvs/J0841+7053_X_map.mod wobs /scr/pima/rdv72_uvs/J0841+7053_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J0841+7053_X_uvs.fits wwins /scr/pima/rdv72_uvs/J0841+7053_X_map.win ! wwins: Wrote 13 windows to /scr/pima/rdv72_uvs/J0841+7053_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122819 Jy ! Component: 100 - total flux cleaned = -0.00184597 Jy ! Component: 150 - total flux cleaned = -0.00177114 Jy ! Component: 200 - total flux cleaned = -0.0016168 Jy ! Component: 250 - total flux cleaned = -0.00161815 Jy ! Component: 300 - total flux cleaned = -0.0019096 Jy ! Component: 350 - total flux cleaned = -0.00198046 Jy ! Component: 400 - total flux cleaned = -0.0020516 Jy ! Component: 450 - total flux cleaned = -0.00191423 Jy ! Component: 500 - total flux cleaned = -0.00191431 Jy ! Component: 550 - total flux cleaned = -0.0017801 Jy ! Component: 600 - total flux cleaned = -0.00158279 Jy ! Component: 650 - total flux cleaned = -0.00151739 Jy ! Component: 700 - total flux cleaned = -0.00138844 Jy ! Component: 750 - total flux cleaned = -0.00119798 Jy ! Component: 800 - total flux cleaned = -0.00101049 Jy ! Component: 850 - total flux cleaned = -0.0008861 Jy ! Component: 900 - total flux cleaned = -0.000579291 Jy ! Component: 950 - total flux cleaned = -0.00051898 Jy ! Component: 1000 - total flux cleaned = -0.000519152 Jy ! Component: 1050 - total flux cleaned = -0.000220863 Jy ! Component: 1100 - total flux cleaned = -0.000339463 Jy ! Component: 1150 - total flux cleaned = -0.000105191 Jy ! Component: 1200 - total flux cleaned = -0.000163951 Jy ! Component: 1250 - total flux cleaned = -0.000163691 Jy ! Component: 1300 - total flux cleaned = -4.86031e-05 Jy ! Component: 1350 - total flux cleaned = 0.000463245 Jy ! Component: 1400 - total flux cleaned = 0.000350977 Jy ! Component: 1450 - total flux cleaned = 0.00046257 Jy ! Component: 1500 - total flux cleaned = 0.000908067 Jy ! Component: 1550 - total flux cleaned = 0.000962954 Jy ! Component: 1600 - total flux cleaned = 0.00129196 Jy ! Component: 1650 - total flux cleaned = 0.00145564 Jy ! Component: 1700 - total flux cleaned = 0.0016182 Jy ! Component: 1750 - total flux cleaned = 0.0017261 Jy ! Component: 1800 - total flux cleaned = 0.00209956 Jy ! Component: 1850 - total flux cleaned = 0.00220545 Jy ! Component: 1900 - total flux cleaned = 0.00257447 Jy ! Component: 1950 - total flux cleaned = 0.00257416 Jy ! Component: 2000 - total flux cleaned = 0.00278312 Jy ! Component: 2050 - total flux cleaned = 0.00298986 Jy ! Component: 2100 - total flux cleaned = 0.00304104 Jy ! Component: 2150 - total flux cleaned = 0.00314398 Jy ! Component: 2200 - total flux cleaned = 0.00339831 Jy ! Component: 2250 - total flux cleaned = 0.00344881 Jy ! Component: 2300 - total flux cleaned = 0.00359966 Jy ! Component: 2350 - total flux cleaned = 0.0036496 Jy ! Component: 2400 - total flux cleaned = 0.00389875 Jy ! Component: 2450 - total flux cleaned = 0.00404721 Jy ! Component: 2500 - total flux cleaned = 0.00444133 Jy ! Component: 2550 - total flux cleaned = 0.00478385 Jy ! Component: 2600 - total flux cleaned = 0.00468621 Jy ! Component: 2650 - total flux cleaned = 0.00463805 Jy ! Component: 2700 - total flux cleaned = 0.00497621 Jy ! Component: 2750 - total flux cleaned = 0.00502423 Jy ! Component: 2800 - total flux cleaned = 0.00526361 Jy ! Component: 2850 - total flux cleaned = 0.00550142 Jy ! Component: 2900 - total flux cleaned = 0.00573861 Jy ! Component: 2950 - total flux cleaned = 0.00592735 Jy ! Component: 3000 - total flux cleaned = 0.00564536 Jy ! Component: 3050 - total flux cleaned = 0.00578597 Jy ! Component: 3100 - total flux cleaned = 0.00592567 Jy ! Component: 3150 - total flux cleaned = 0.00601846 Jy ! Component: 3200 - total flux cleaned = 0.00606463 Jy ! Component: 3250 - total flux cleaned = 0.00624863 Jy ! Component: 3300 - total flux cleaned = 0.00643184 Jy ! Component: 3350 - total flux cleaned = 0.0065227 Jy ! Component: 3400 - total flux cleaned = 0.00661353 Jy ! Component: 3450 - total flux cleaned = 0.00652331 Jy ! Component: 3500 - total flux cleaned = 0.00679362 Jy ! Component: 3550 - total flux cleaned = 0.00688358 Jy ! Component: 3600 - total flux cleaned = 0.006973 Jy ! Component: 3650 - total flux cleaned = 0.00710614 Jy ! Component: 3700 - total flux cleaned = 0.00710633 Jy ! Component: 3750 - total flux cleaned = 0.00741551 Jy ! Component: 3800 - total flux cleaned = 0.0074154 Jy ! Component: 3850 - total flux cleaned = 0.00750316 Jy ! Component: 3900 - total flux cleaned = 0.00776548 Jy ! Component: 3950 - total flux cleaned = 0.00798308 Jy ! Component: 4000 - total flux cleaned = 0.0078962 Jy ! Component: 4050 - total flux cleaned = 0.00793937 Jy ! Total flux subtracted in 4096 components = 0.00806847 Jy ! Clean residual min=-0.002872 max=0.002433 Jy/beam ! Clean residual mean=0.000004 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 1.34606 Jy keep ! Adding 369 model components to the UV plane model. ! The established model now contains 646 components and 1.34606 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J0841+7053_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7937 x 0.847 at 2.094 degrees (North through East) ! Clean map min=-0.0049214 max=0.63107 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J0841+7053_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.631066 invert ! Inverting map ! Your choice of large map pixels excluded 6.28% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! The y-axis pixel size should ideally be below 0.1642 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000706078 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.33566 0.33566 0.671319 1.34264 2.68528 5.37055 10.7411 21.4822 42.9644 85.9289 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.631 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J0841+7053_X_uvs.log closed on Sat Oct 5 08:46:17 2013