! Started logfile: /scr/pima/rdv72_uvs/J0611-2827_X_uvs.log on Sat Oct 5 08:45:36 2013 obs /scr/pima/rdv72_uvs/J0611-2827_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J0611-2827_X_uva.fits ! AN table 1: 47 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.848109 visibilities/baseline/integration-bin. ! Found source: J0611-2827 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5740 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J0611-2827_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013712Jy sigma=1.232128 ! Fit after self-cal, rms=0.891627Jy sigma=1.073259 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6291 mas, bmaj=1.645 mas, bpa=-0.3348 degrees ! Estimated noise=15.2424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0897748 Jy ! Component: 100 - total flux cleaned = 0.115486 Jy ! Total flux subtracted in 100 components = 0.115486 Jy ! Clean residual min=-0.011171 max=0.015098 Jy/beam ! Clean residual mean=0.000011 rms=0.002862 Jy/beam ! Combined flux in latest and established models = 0.115486 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.115486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111224Jy sigma=0.125218 ! Fit after self-cal, rms=0.111008Jy sigma=0.125054 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8286 mas, bmaj=2.102 mas, bpa=0.3757 degrees ! Estimated noise=8.06446 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126528 Jy ! Component: 100 - total flux cleaned = 0.0155686 Jy ! Component: 150 - total flux cleaned = 0.0158141 Jy ! Component: 200 - total flux cleaned = 0.0159043 Jy ! Total flux subtracted in 200 components = 0.0159043 Jy ! Clean residual min=-0.010109 max=0.010586 Jy/beam ! Clean residual mean=0.000037 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 0.13139 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.13139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110563Jy sigma=0.122258 ! Fit after self-cal, rms=0.110579Jy sigma=0.122250 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.64 FD 0.81 KP 1.20 LA 0.88 ! MK 0.98 NL 1.14 OV 1.15 PT 0.82 ! SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 0.78 KP 1.13 LA 0.95 ! MK 0.94 NL 1.14 OV 1.01 PT 0.93 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.63 FD 0.75 KP 1.06 LA 1.02 ! MK 0.94 NL 1.23 OV 1.07 PT 0.95 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 0.80 KP 1.12 LA 1.05 ! MK 1.02 NL 1.33 OV 1.13 PT 0.94 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.110579Jy sigma=0.122250 ! Fit after self-cal, rms=0.119755Jy sigma=0.116823 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8186 mas, bmaj=2.093 mas, bpa=0.1453 degrees ! Estimated noise=7.95141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.27326e-05 Jy ! Component: 100 - total flux cleaned = -4.25349e-05 Jy ! Component: 150 - total flux cleaned = -4.23633e-05 Jy ! Component: 200 - total flux cleaned = -2.56918e-05 Jy ! Total flux subtracted in 200 components = -2.56918e-05 Jy ! Clean residual min=-0.004435 max=0.004805 Jy/beam ! Clean residual mean=-0.000007 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.131365 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 16 components and 0.131365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119746Jy sigma=0.116820 ! Fit after self-cal, rms=0.120623Jy sigma=0.116625 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120623Jy sigma=0.116625 ! Fit after self-cal, rms=0.121440Jy sigma=0.116614 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8181 mas, bmaj=2.092 mas, bpa=0.05211 degrees ! Estimated noise=7.95249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.47999e-05 Jy ! Component: 100 - total flux cleaned = -2.98043e-05 Jy ! Component: 150 - total flux cleaned = -2.98462e-05 Jy ! Component: 200 - total flux cleaned = -1.43707e-05 Jy ! Total flux subtracted in 200 components = -1.43707e-05 Jy ! Clean residual min=-0.004402 max=0.004591 Jy/beam ! Clean residual mean=-0.000006 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.13135 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 18 components and 0.13135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121430Jy sigma=0.116612 ! Fit after self-cal, rms=0.121486Jy sigma=0.116611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -39.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340806 Jy ! Component: 100 - total flux cleaned = 0.00354656 Jy ! Component: 150 - total flux cleaned = 0.00359522 Jy ! Component: 200 - total flux cleaned = 0.00350806 Jy ! Total flux subtracted in 200 components = 0.00350806 Jy ! Clean residual min=-0.004220 max=0.003877 Jy/beam ! Clean residual mean=-0.000004 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.134858 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.134858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121323Jy sigma=0.116454 ! Fit after self-cal, rms=0.121277Jy sigma=0.116429 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121277Jy sigma=0.116429 ! Fit after self-cal, rms=0.122393Jy sigma=0.116097 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8188 mas, bmaj=2.113 mas, bpa=-0.1107 degrees ! Estimated noise=7.95145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000939656 Jy ! Component: 100 - total flux cleaned = 0.000758815 Jy ! Component: 150 - total flux cleaned = 0.000679252 Jy ! Component: 200 - total flux cleaned = 0.000642787 Jy ! Total flux subtracted in 200 components = 0.000642787 Jy ! Clean residual min=-0.003744 max=0.003823 Jy/beam ! Clean residual mean=-0.000005 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.135501 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.135501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122340Jy sigma=0.116066 ! Fit after self-cal, rms=0.122363Jy sigma=0.116050 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185812 Jy ! Component: 100 - total flux cleaned = 0.000117905 Jy ! Component: 150 - total flux cleaned = 8.6346e-05 Jy ! Component: 200 - total flux cleaned = 5.61709e-05 Jy ! Total flux subtracted in 200 components = 5.61709e-05 Jy ! Clean residual min=-0.003748 max=0.003763 Jy/beam ! Clean residual mean=-0.000005 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.135557 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.135557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122337Jy sigma=0.116035 ! Fit after self-cal, rms=0.122335Jy sigma=0.116034 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122335Jy sigma=0.116034 ! Fit after self-cal, rms=0.122589Jy sigma=0.116028 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=6.627 mas, bpa=1.743 degrees ! Estimated noise=10.1112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296455 Jy ! Component: 100 - total flux cleaned = 0.000279231 Jy ! Component: 150 - total flux cleaned = 0.000261623 Jy ! Component: 200 - total flux cleaned = 0.000261861 Jy ! Total flux subtracted in 200 components = 0.000261861 Jy ! Clean residual min=-0.004504 max=0.004023 Jy/beam ! Clean residual mean=-0.000010 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.135819 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.135819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122586Jy sigma=0.116037 ! Fit after self-cal, rms=0.122589Jy sigma=0.116036 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.12846e-05 Jy ! Component: 100 - total flux cleaned = 9.1617e-05 Jy ! Component: 150 - total flux cleaned = 7.63873e-05 Jy ! Component: 200 - total flux cleaned = 6.21472e-05 Jy ! Total flux subtracted in 200 components = 6.21472e-05 Jy ! Clean residual min=-0.004497 max=0.004002 Jy/beam ! Clean residual mean=-0.000009 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.135881 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.135881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122588Jy sigma=0.116041 ! Fit after self-cal, rms=0.122586Jy sigma=0.116041 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8206 mas, bmaj=2.119 mas, bpa=-0.1177 degrees ! Estimated noise=7.96018 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8206 x 2.119 at -0.1177 degrees (North through East) ! Clean map min=-0.0035324 max=0.11738 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6199 mas, bmaj=1.653 mas, bpa=-1.147 degrees ! Estimated noise=15.1599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0896696 Jy ! Component: 100 - total flux cleaned = 0.116978 Jy ! Component: 150 - total flux cleaned = 0.128315 Jy ! Component: 200 - total flux cleaned = 0.131968 Jy ! Total flux subtracted in 200 components = 0.131968 Jy ! Clean residual min=-0.009092 max=0.007627 Jy/beam ! Clean residual mean=-0.000013 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 0.131968 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.131968 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8206 mas, bmaj=2.119 mas, bpa=-0.1177 degrees ! Estimated noise=7.96018 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364807 Jy ! Component: 100 - total flux cleaned = 0.00410081 Jy ! Component: 150 - total flux cleaned = 0.00390588 Jy ! Component: 200 - total flux cleaned = 0.00379107 Jy ! Total flux subtracted in 200 components = 0.00379107 Jy ! Clean residual min=-0.003972 max=0.003619 Jy/beam ! Clean residual mean=-0.000005 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.135759 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.135759 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=6.627 mas, bpa=1.743 degrees ! Estimated noise=10.1112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426359 Jy ! Component: 100 - total flux cleaned = 0.000369873 Jy ! Component: 150 - total flux cleaned = 0.000370556 Jy ! Component: 200 - total flux cleaned = 0.000348815 Jy ! Total flux subtracted in 200 components = 0.000348815 Jy ! Clean residual min=-0.004508 max=0.003983 Jy/beam ! Clean residual mean=-0.000010 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.136108 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.2069e-05 Jy ! Component: 100 - total flux cleaned = -6.41896e-05 Jy ! Component: 150 - total flux cleaned = -8.45265e-05 Jy ! Component: 200 - total flux cleaned = -0.000104184 Jy ! Total flux subtracted in 200 components = -0.000104184 Jy ! Clean residual min=-0.004513 max=0.003994 Jy/beam ! Clean residual mean=-0.000010 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.136003 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.136003 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8206 mas, bmaj=2.119 mas, bpa=-0.1177 degrees ! Estimated noise=7.96018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148345 Jy ! Component: 100 - total flux cleaned = -0.000288706 Jy ! Component: 150 - total flux cleaned = -0.000451427 Jy ! Component: 200 - total flux cleaned = -0.000631389 Jy ! Total flux subtracted in 200 components = -0.000631389 Jy ! Clean residual min=-0.003835 max=0.003494 Jy/beam ! Clean residual mean=-0.000005 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.135372 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.135372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122528Jy sigma=0.116015 ! Fit after self-cal, rms=0.122535Jy sigma=0.116007 wmodel /scr/pima/rdv72_uvs/J0611-2827_X_map.mod ! Writing 44 model components to file: /scr/pima/rdv72_uvs/J0611-2827_X_map.mod wobs /scr/pima/rdv72_uvs/J0611-2827_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J0611-2827_X_uvs.fits wwins /scr/pima/rdv72_uvs/J0611-2827_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv72_uvs/J0611-2827_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150034 Jy ! Component: 100 - total flux cleaned = -0.00221663 Jy ! Component: 150 - total flux cleaned = -0.00283045 Jy ! Component: 200 - total flux cleaned = -0.00330182 Jy ! Component: 250 - total flux cleaned = -0.00375643 Jy ! Component: 300 - total flux cleaned = -0.00403141 Jy ! Component: 350 - total flux cleaned = -0.0042455 Jy ! Component: 400 - total flux cleaned = -0.00450452 Jy ! Component: 450 - total flux cleaned = -0.00460385 Jy ! Component: 500 - total flux cleaned = -0.00470098 Jy ! Component: 550 - total flux cleaned = -0.00484393 Jy ! Component: 600 - total flux cleaned = -0.00484347 Jy ! Component: 650 - total flux cleaned = -0.00484308 Jy ! Component: 700 - total flux cleaned = -0.00466328 Jy ! Component: 750 - total flux cleaned = -0.00453067 Jy ! Component: 800 - total flux cleaned = -0.00435717 Jy ! Component: 850 - total flux cleaned = -0.00405805 Jy ! Component: 900 - total flux cleaned = -0.00376439 Jy ! Component: 950 - total flux cleaned = -0.00343479 Jy ! Component: 1000 - total flux cleaned = -0.0032313 Jy ! Component: 1050 - total flux cleaned = -0.00291112 Jy ! Component: 1100 - total flux cleaned = -0.00259603 Jy ! Component: 1150 - total flux cleaned = -0.00244087 Jy ! Component: 1200 - total flux cleaned = -0.00221149 Jy ! Component: 1250 - total flux cleaned = -0.00209812 Jy ! Component: 1300 - total flux cleaned = -0.00183718 Jy ! Component: 1350 - total flux cleaned = -0.00161718 Jy ! Component: 1400 - total flux cleaned = -0.00158099 Jy ! Component: 1450 - total flux cleaned = -0.00140085 Jy ! Component: 1500 - total flux cleaned = -0.00129401 Jy ! Component: 1550 - total flux cleaned = -0.00104791 Jy ! Component: 1600 - total flux cleaned = -0.000943451 Jy ! Component: 1650 - total flux cleaned = -0.000668805 Jy ! Component: 1700 - total flux cleaned = -0.000499788 Jy ! Component: 1750 - total flux cleaned = -0.000432761 Jy ! Component: 1800 - total flux cleaned = -0.000266704 Jy ! Component: 1850 - total flux cleaned = -0.000168429 Jy ! Component: 1900 - total flux cleaned = 5.88167e-05 Jy ! Component: 1950 - total flux cleaned = 2.61784e-05 Jy ! Component: 2000 - total flux cleaned = 0.000153373 Jy ! Component: 2050 - total flux cleaned = 0.000248165 Jy ! Component: 2100 - total flux cleaned = 0.000341972 Jy ! Component: 2150 - total flux cleaned = 0.000403827 Jy ! Component: 2200 - total flux cleaned = 0.000526495 Jy ! Component: 2250 - total flux cleaned = 0.000587206 Jy ! Component: 2300 - total flux cleaned = 0.000677661 Jy ! Component: 2350 - total flux cleaned = 0.000796728 Jy ! Component: 2400 - total flux cleaned = 0.000737773 Jy ! Component: 2450 - total flux cleaned = 0.000796529 Jy ! Component: 2500 - total flux cleaned = 0.000825719 Jy ! Component: 2550 - total flux cleaned = 0.000883345 Jy ! Component: 2600 - total flux cleaned = 0.000825738 Jy ! Component: 2650 - total flux cleaned = 0.000769119 Jy ! Component: 2700 - total flux cleaned = 0.000853796 Jy ! Component: 2750 - total flux cleaned = 0.000825641 Jy ! Component: 2800 - total flux cleaned = 0.000909154 Jy ! Component: 2850 - total flux cleaned = 0.00101991 Jy ! Component: 2900 - total flux cleaned = 0.000992299 Jy ! Component: 2950 - total flux cleaned = 0.00093764 Jy ! Component: 3000 - total flux cleaned = 0.000937816 Jy ! Component: 3050 - total flux cleaned = 0.000965123 Jy ! Component: 3100 - total flux cleaned = 0.000991816 Jy ! Component: 3150 - total flux cleaned = 0.000991769 Jy ! Component: 3200 - total flux cleaned = 0.000965239 Jy ! Component: 3250 - total flux cleaned = 0.000939131 Jy ! Component: 3300 - total flux cleaned = 0.000965403 Jy ! Component: 3350 - total flux cleaned = 0.000913141 Jy ! Component: 3400 - total flux cleaned = 0.00093913 Jy ! Component: 3450 - total flux cleaned = 0.000835536 Jy ! Component: 3500 - total flux cleaned = 0.000732652 Jy ! Component: 3550 - total flux cleaned = 0.000707268 Jy ! Component: 3600 - total flux cleaned = 0.000732702 Jy ! Component: 3650 - total flux cleaned = 0.000605694 Jy ! Component: 3700 - total flux cleaned = 0.000555325 Jy ! Component: 3750 - total flux cleaned = 0.000429893 Jy ! Component: 3800 - total flux cleaned = 0.000454895 Jy ! Component: 3850 - total flux cleaned = 0.000479689 Jy ! Component: 3900 - total flux cleaned = 0.000331107 Jy ! Component: 3950 - total flux cleaned = 0.000380423 Jy ! Component: 4000 - total flux cleaned = 0.000208557 Jy ! Component: 4050 - total flux cleaned = 0.000208669 Jy ! Total flux subtracted in 4096 components = 0.000135706 Jy ! Clean residual min=-0.001255 max=0.001420 Jy/beam ! Clean residual mean=-0.000006 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.135508 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 310 components and 0.135508 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J0611-2827_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8206 x 2.119 at -0.1177 degrees (North through East) ! Clean map min=-0.0029325 max=0.1179 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J0611-2827_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117897 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000406856 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03528 1.03528 2.07056 4.14112 8.28225 16.5645 33.129 66.258 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.117 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J0611-2827_X_uvs.log closed on Sat Oct 5 08:45:40 2013