! Started logfile: /scr/pima/rdv72_uvs/J0611-2827_S_uvs.log on Sat Oct 5 08:45:24 2013 obs /scr/pima/rdv72_uvs/J0611-2827_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J0611-2827_S_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! AN table 2: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0611-2827 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7596 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J0611-2827_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.007845Jy sigma=1.627894 ! Fit after self-cal, rms=0.887190Jy sigma=1.422282 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.644 mas, bmaj=3.169 mas, bpa=-50.91 degrees ! Estimated noise=11.3374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0913268 Jy ! Component: 100 - total flux cleaned = 0.111348 Jy ! Total flux subtracted in 100 components = 0.111348 Jy ! Clean residual min=-0.007125 max=0.007846 Jy/beam ! Clean residual mean=0.000010 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.111348 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.111348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086883Jy sigma=0.125414 ! Fit after self-cal, rms=0.086880Jy sigma=0.125406 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.659 mas, bmaj=4.15 mas, bpa=-38.74 degrees ! Estimated noise=5.23048 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00845826 Jy ! Component: 100 - total flux cleaned = 0.0118071 Jy ! Component: 150 - total flux cleaned = 0.0132584 Jy ! Component: 200 - total flux cleaned = 0.0133994 Jy ! Total flux subtracted in 200 components = 0.0133994 Jy ! Clean residual min=-0.005448 max=0.005631 Jy/beam ! Clean residual mean=-0.000036 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.124747 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.124747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086545Jy sigma=0.123435 ! Fit after self-cal, rms=0.086581Jy sigma=0.123425 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 KP 1.19 LA 0.99 ! MK 0.89 NL 1.01 OV 0.98 PT 0.99 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 0.94 HO 0.94 KP 1.28 ! LA 1.02 MK 0.97 NL 0.96 OV 0.95 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.99 KP 1.21 LA 0.93 ! MK 0.93 NL 1.05 OV 1.07 PT 1.03 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.02 HO 0.98 KP 1.21 ! LA 0.87 MK 1.00 NL 1.01 OV 0.97 ! PT 1.00 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.01 KP 1.17 LA 0.85 ! MK 1.07 NL 1.08 OV 1.00 PT 1.02 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.20 FD 1.03 HO 0.92 KP 1.21 ! LA 0.84 MK 0.99 NL 1.13 OV 1.04 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.51 FD 0.99 KP 1.02 LA 0.72 ! MK 1.03 NL 1.01 OV 0.94 PT 0.84 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HO 1.01 KP 1.08 ! LA 0.76 MK 1.08 NL 1.00 OV 0.86 ! PT 0.89 SC 0.96 ! ! ! Fit before self-cal, rms=0.086581Jy sigma=0.123425 ! Fit after self-cal, rms=0.087697Jy sigma=0.119391 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.626 mas, bmaj=4.128 mas, bpa=-39.81 degrees ! Estimated noise=5.18591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344974 Jy ! Component: 100 - total flux cleaned = 0.00417921 Jy ! Component: 150 - total flux cleaned = 0.00428575 Jy ! Component: 200 - total flux cleaned = 0.00428646 Jy ! Total flux subtracted in 200 components = 0.00428646 Jy ! Clean residual min=-0.002951 max=0.002693 Jy/beam ! Clean residual mean=0.000001 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.129034 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.129034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087528Jy sigma=0.119148 ! Fit after self-cal, rms=0.087777Jy sigma=0.119034 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087777Jy sigma=0.119034 ! Fit after self-cal, rms=0.087407Jy sigma=0.118997 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=4.118 mas, bpa=-39.85 degrees ! Estimated noise=5.17768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182248 Jy ! Component: 100 - total flux cleaned = 0.00204287 Jy ! Component: 150 - total flux cleaned = 0.00217742 Jy ! Component: 200 - total flux cleaned = 0.00223435 Jy ! Total flux subtracted in 200 components = 0.00223435 Jy ! Clean residual min=-0.002911 max=0.002565 Jy/beam ! Clean residual mean=-0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.131268 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.131268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087346Jy sigma=0.118923 ! Fit after self-cal, rms=0.087344Jy sigma=0.118909 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005594 Jy ! Component: 100 - total flux cleaned = 0.000674848 Jy ! Component: 150 - total flux cleaned = 0.000726622 Jy ! Component: 200 - total flux cleaned = 0.00077328 Jy ! Total flux subtracted in 200 components = 0.00077328 Jy ! Clean residual min=-0.002940 max=0.002609 Jy/beam ! Clean residual mean=0.000000 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.132041 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.132041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087319Jy sigma=0.118889 ! Fit after self-cal, rms=0.087326Jy sigma=0.118886 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087326Jy sigma=0.118886 ! Fit after self-cal, rms=0.086816Jy sigma=0.118865 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=4.111 mas, bpa=-39.87 degrees ! Estimated noise=5.16003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00063144 Jy ! Component: 100 - total flux cleaned = 0.000808648 Jy ! Component: 150 - total flux cleaned = 0.000886007 Jy ! Component: 200 - total flux cleaned = 0.000957752 Jy ! Total flux subtracted in 200 components = 0.000957752 Jy ! Clean residual min=-0.002957 max=0.002591 Jy/beam ! Clean residual mean=-0.000001 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.132999 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.132999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086788Jy sigma=0.118842 ! Fit after self-cal, rms=0.086788Jy sigma=0.118838 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284363 Jy ! Component: 100 - total flux cleaned = 0.000376696 Jy ! Component: 150 - total flux cleaned = 0.000418652 Jy ! Component: 200 - total flux cleaned = 0.00043901 Jy ! Total flux subtracted in 200 components = 0.00043901 Jy ! Clean residual min=-0.002957 max=0.002607 Jy/beam ! Clean residual mean=-0.000001 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.133438 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.133438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086770Jy sigma=0.118828 ! Fit after self-cal, rms=0.086777Jy sigma=0.118827 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086777Jy sigma=0.118827 ! Fit after self-cal, rms=0.086444Jy sigma=0.118818 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.838 mas, bmaj=22.16 mas, bpa=-0.02841 degrees ! Estimated noise=6.38919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000928579 Jy ! Component: 100 - total flux cleaned = 0.000973287 Jy ! Component: 150 - total flux cleaned = 0.000956942 Jy ! Component: 200 - total flux cleaned = 0.000942763 Jy ! Total flux subtracted in 200 components = 0.000942763 Jy ! Clean residual min=-0.003093 max=0.002432 Jy/beam ! Clean residual mean=-0.000004 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.134381 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 58 components and 0.134381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086440Jy sigma=0.118815 ! Fit after self-cal, rms=0.086439Jy sigma=0.118810 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267272 Jy ! Component: 100 - total flux cleaned = 0.000300149 Jy ! Component: 150 - total flux cleaned = 0.000286859 Jy ! Component: 200 - total flux cleaned = 0.000286861 Jy ! Total flux subtracted in 200 components = 0.000286861 Jy ! Clean residual min=-0.003091 max=0.002439 Jy/beam ! Clean residual mean=-0.000004 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.134668 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.134668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086442Jy sigma=0.118814 ! Fit after self-cal, rms=0.086442Jy sigma=0.118812 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=4.105 mas, bpa=-39.86 degrees ! Estimated noise=5.14602 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.6 x 4.105 at -39.86 degrees (North through East) ! Clean map min=-0.0027683 max=0.11458 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.616 mas, bmaj=3.166 mas, bpa=-51.27 degrees ! Estimated noise=10.9493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0879912 Jy ! Component: 100 - total flux cleaned = 0.107953 Jy ! Component: 150 - total flux cleaned = 0.116007 Jy ! Component: 200 - total flux cleaned = 0.1211 Jy ! Total flux subtracted in 200 components = 0.1211 Jy ! Clean residual min=-0.005647 max=0.005426 Jy/beam ! Clean residual mean=-0.000004 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.1211 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.1211 Jy ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=4.105 mas, bpa=-39.86 degrees ! Estimated noise=5.14602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574718 Jy ! Component: 100 - total flux cleaned = 0.0087831 Jy ! Component: 150 - total flux cleaned = 0.0106466 Jy ! Component: 200 - total flux cleaned = 0.0115477 Jy ! Total flux subtracted in 200 components = 0.0115477 Jy ! Clean residual min=-0.003113 max=0.002648 Jy/beam ! Clean residual mean=-0.000003 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.132648 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 48 components and 0.132648 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.838 mas, bmaj=22.16 mas, bpa=-0.02841 degrees ! Estimated noise=6.38919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114383 Jy ! Component: 100 - total flux cleaned = 0.00132034 Jy ! Component: 150 - total flux cleaned = 0.00142451 Jy ! Component: 200 - total flux cleaned = 0.00153217 Jy ! Total flux subtracted in 200 components = 0.00153217 Jy ! Clean residual min=-0.003195 max=0.002510 Jy/beam ! Clean residual mean=-0.000005 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.13418 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.94589e-05 Jy ! Component: 100 - total flux cleaned = 0.000151558 Jy ! Component: 150 - total flux cleaned = 0.000203043 Jy ! Component: 200 - total flux cleaned = 0.000250707 Jy ! Total flux subtracted in 200 components = 0.000250707 Jy ! Clean residual min=-0.003161 max=0.002438 Jy/beam ! Clean residual mean=-0.000004 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.134431 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.134431 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=4.105 mas, bpa=-39.86 degrees ! Estimated noise=5.14602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000377515 Jy ! Component: 100 - total flux cleaned = -0.000376986 Jy ! Component: 150 - total flux cleaned = -0.000376928 Jy ! Component: 200 - total flux cleaned = -0.000377183 Jy ! Total flux subtracted in 200 components = -0.000377183 Jy ! Clean residual min=-0.002992 max=0.002608 Jy/beam ! Clean residual mean=-0.000002 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.134054 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.134054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086404Jy sigma=0.118830 ! Fit after self-cal, rms=0.086417Jy sigma=0.118816 wmodel /scr/pima/rdv72_uvs/J0611-2827_S_map.mod ! Writing 70 model components to file: /scr/pima/rdv72_uvs/J0611-2827_S_map.mod wobs /scr/pima/rdv72_uvs/J0611-2827_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J0611-2827_S_uvs.fits wwins /scr/pima/rdv72_uvs/J0611-2827_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rdv72_uvs/J0611-2827_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000534162 Jy ! Component: 100 - total flux cleaned = -0.000237787 Jy ! Component: 150 - total flux cleaned = 0.00016311 Jy ! Component: 200 - total flux cleaned = 0.000702968 Jy ! Component: 250 - total flux cleaned = 0.00118852 Jy ! Component: 300 - total flux cleaned = 0.0015513 Jy ! Component: 350 - total flux cleaned = 0.00190504 Jy ! Component: 400 - total flux cleaned = 0.00214701 Jy ! Component: 450 - total flux cleaned = 0.00231581 Jy ! Component: 500 - total flux cleaned = 0.00244912 Jy ! Component: 550 - total flux cleaned = 0.0027102 Jy ! Component: 600 - total flux cleaned = 0.00293355 Jy ! Component: 650 - total flux cleaned = 0.00312177 Jy ! Component: 700 - total flux cleaned = 0.00330667 Jy ! Component: 750 - total flux cleaned = 0.0033973 Jy ! Component: 800 - total flux cleaned = 0.00357637 Jy ! Component: 850 - total flux cleaned = 0.00366474 Jy ! Component: 900 - total flux cleaned = 0.00378061 Jy ! Component: 950 - total flux cleaned = 0.00389401 Jy ! Component: 1000 - total flux cleaned = 0.00380947 Jy ! Component: 1050 - total flux cleaned = 0.00386532 Jy ! Component: 1100 - total flux cleaned = 0.00397461 Jy ! Component: 1150 - total flux cleaned = 0.00386632 Jy ! Component: 1200 - total flux cleaned = 0.00376018 Jy ! Component: 1250 - total flux cleaned = 0.00381307 Jy ! Component: 1300 - total flux cleaned = 0.00373442 Jy ! Component: 1350 - total flux cleaned = 0.00370905 Jy ! Component: 1400 - total flux cleaned = 0.0037601 Jy ! Component: 1450 - total flux cleaned = 0.00381051 Jy ! Component: 1500 - total flux cleaned = 0.00376002 Jy ! Component: 1550 - total flux cleaned = 0.00371039 Jy ! Component: 1600 - total flux cleaned = 0.00383294 Jy ! Component: 1650 - total flux cleaned = 0.00380859 Jy ! Component: 1700 - total flux cleaned = 0.00383245 Jy ! Component: 1750 - total flux cleaned = 0.00371329 Jy ! Component: 1800 - total flux cleaned = 0.00368961 Jy ! Component: 1850 - total flux cleaned = 0.00368974 Jy ! Component: 1900 - total flux cleaned = 0.00371297 Jy ! Component: 1950 - total flux cleaned = 0.00371304 Jy ! Component: 2000 - total flux cleaned = 0.00371296 Jy ! Component: 2050 - total flux cleaned = 0.0037354 Jy ! Component: 2100 - total flux cleaned = 0.00366812 Jy ! Component: 2150 - total flux cleaned = 0.00373486 Jy ! Component: 2200 - total flux cleaned = 0.0036905 Jy ! Component: 2250 - total flux cleaned = 0.00373413 Jy ! Component: 2300 - total flux cleaned = 0.00375574 Jy ! Component: 2350 - total flux cleaned = 0.00364783 Jy ! Component: 2400 - total flux cleaned = 0.00360515 Jy ! Component: 2450 - total flux cleaned = 0.00362648 Jy ! Component: 2500 - total flux cleaned = 0.00364754 Jy ! Component: 2550 - total flux cleaned = 0.00354309 Jy ! Component: 2600 - total flux cleaned = 0.00360554 Jy ! Component: 2650 - total flux cleaned = 0.00360553 Jy ! Component: 2700 - total flux cleaned = 0.00368733 Jy ! Component: 2750 - total flux cleaned = 0.00368717 Jy ! Component: 2800 - total flux cleaned = 0.00366687 Jy ! Component: 2850 - total flux cleaned = 0.00376709 Jy ! Component: 2900 - total flux cleaned = 0.00372719 Jy ! Component: 2950 - total flux cleaned = 0.00376692 Jy ! Component: 3000 - total flux cleaned = 0.00376695 Jy ! Component: 3050 - total flux cleaned = 0.0038257 Jy ! Component: 3100 - total flux cleaned = 0.00388395 Jy ! Component: 3150 - total flux cleaned = 0.0038838 Jy ! Component: 3200 - total flux cleaned = 0.00396032 Jy ! Component: 3250 - total flux cleaned = 0.00401749 Jy ! Component: 3300 - total flux cleaned = 0.00405519 Jy ! Component: 3350 - total flux cleaned = 0.00407406 Jy ! Component: 3400 - total flux cleaned = 0.00413024 Jy ! Component: 3450 - total flux cleaned = 0.00414861 Jy ! Component: 3500 - total flux cleaned = 0.00422274 Jy ! Component: 3550 - total flux cleaned = 0.00425958 Jy ! Component: 3600 - total flux cleaned = 0.00429614 Jy ! Component: 3650 - total flux cleaned = 0.00436897 Jy ! Component: 3700 - total flux cleaned = 0.00436883 Jy ! Component: 3750 - total flux cleaned = 0.00440488 Jy ! Component: 3800 - total flux cleaned = 0.0044586 Jy ! Component: 3850 - total flux cleaned = 0.00449433 Jy ! Component: 3900 - total flux cleaned = 0.00452985 Jy ! Component: 3950 - total flux cleaned = 0.00461806 Jy ! Component: 4000 - total flux cleaned = 0.00467066 Jy ! Component: 4050 - total flux cleaned = 0.00472304 Jy ! Total flux subtracted in 4096 components = 0.00472308 Jy ! Clean residual min=-0.000969 max=0.000891 Jy/beam ! Clean residual mean=-0.000001 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.138777 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 323 components and 0.138777 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J0611-2827_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.6 x 4.105 at -39.86 degrees (North through East) ! Clean map min=-0.001634 max=0.11235 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J0611-2827_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11235 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000287656 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.768106 0.768106 1.53621 3.07242 6.14485 12.2897 24.5794 49.1588 98.3175 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.112 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J0611-2827_S_uvs.log closed on Sat Oct 5 08:45:28 2013