! Started logfile: /scr/pima/rdv72_uvs/J0555+3948_X_uvs.log on Sat Oct 5 08:45:21 2013 obs /scr/pima/rdv72_uvs/J0555+3948_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J0555+3948_X_uva.fits ! AN table 1: 3 integrations on 10 of 10 possible baselines. ! AN table 2: 6 integrations on 45 of 45 possible baselines. ! AN table 3: 7 integrations on 3 of 3 possible baselines. ! AN table 4: 4 integrations on 55 of 55 possible baselines. ! AN table 5: 3 integrations on 45 of 45 possible baselines. ! AN table 6: 3 integrations on 55 of 55 possible baselines. ! AN table 7: 3 integrations on 55 of 55 possible baselines. ! AN table 8: 3 integrations on 66 of 66 possible baselines. ! AN table 9: 3 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.783053 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4288 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J0555+3948_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=2.961702Jy sigma=120.565128 ! Fit after self-cal, rms=1.957324Jy sigma=88.586596 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.68% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.6424 mas, bmaj=0.9357 mas, bpa=-11.64 degrees ! Estimated noise=0.516027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.13471 Jy ! Component: 100 - total flux cleaned = 2.8989 Jy ! Total flux subtracted in 100 components = 2.8989 Jy ! Clean residual min=-0.096687 max=0.370799 Jy/beam ! Clean residual mean=0.000871 rms=0.029744 Jy/beam ! Combined flux in latest and established models = 2.8989 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 2.8989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.977746Jy sigma=43.892402 ! Fit after self-cal, rms=0.974854Jy sigma=43.850788 ! Inverting map ! Your choice of large map pixels excluded 3.68% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Added new window around map position (-0.6, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.42777 Jy ! Component: 100 - total flux cleaned = 0.689458 Jy ! Total flux subtracted in 100 components = 0.689458 Jy ! Clean residual min=-0.085888 max=0.160771 Jy/beam ! Clean residual mean=0.000577 rms=0.022148 Jy/beam ! Combined flux in latest and established models = 3.58836 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 3.58836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.820120Jy sigma=32.726576 ! Fit after self-cal, rms=0.813925Jy sigma=32.649928 ! Inverting map ! Your choice of large map pixels excluded 3.68% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Added new window around map position (-1.4, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18779 Jy ! Component: 100 - total flux cleaned = 0.314135 Jy ! Total flux subtracted in 100 components = 0.314135 Jy ! Clean residual min=-0.079315 max=0.135171 Jy/beam ! Clean residual mean=0.000445 rms=0.019943 Jy/beam ! Combined flux in latest and established models = 3.9025 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 3.9025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.779418Jy sigma=29.097707 ! Fit after self-cal, rms=0.776668Jy sigma=29.020709 ! Inverting map ! Your choice of large map pixels excluded 3.68% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Added new window around map position (-0.8, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13543 Jy ! Component: 100 - total flux cleaned = 0.22462 Jy ! Total flux subtracted in 100 components = 0.22462 Jy ! Clean residual min=-0.076890 max=0.126898 Jy/beam ! Clean residual mean=0.000348 rms=0.018837 Jy/beam ! Combined flux in latest and established models = 4.12712 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 4.12712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.756087Jy sigma=27.170733 ! Fit after self-cal, rms=0.753499Jy sigma=27.045053 ! Inverting map ! Your choice of large map pixels excluded 3.68% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.68% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.7528 mas, bmaj=1.079 mas, bpa=-9.726 degrees ! Estimated noise=0.395893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.190483 Jy ! Component: 100 - total flux cleaned = 0.314485 Jy ! Component: 150 - total flux cleaned = 0.402012 Jy ! Component: 200 - total flux cleaned = 0.456481 Jy ! Total flux subtracted in 200 components = 0.456481 Jy ! Clean residual min=-0.104087 max=0.127323 Jy/beam ! Clean residual mean=0.000299 rms=0.026141 Jy/beam ! Combined flux in latest and established models = 4.5836 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 83 components and 4.5836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.729708Jy sigma=24.448120 ! Fit after self-cal, rms=0.726740Jy sigma=24.225711 ! Inverting map ! Your choice of large map pixels excluded 3.68% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! NL 1.09 NY 1.09 SC 0.81 WZ 1.10 ! ZC 1.32 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.24 FD 0.81 KP 1.04 LA 0.98 ! NL 1.15 NY 1.03 PT 0.93 SC 0.85 ! WZ 1.16 ZC 1.46 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.28 FD 0.76 KP 1.04 LA 0.96 ! NL 1.08 NY 1.05 OV 0.98 PT 0.91 ! SC 0.87 WZ 1.07 ZC 1.48 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.21 FD 0.83 KP 1.01 LA 0.94 ! NL 1.05 NY 1.01 OV 0.98 SC 0.84 ! WZ 1.15 ZC 1.59 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.19 FD 0.75 KK 1.18 KP 1.33 ! LA 0.94 MK 0.99 NL 1.02 NY 1.01 ! OV 0.97 SC 0.85 WZ 1.12 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.22 FD 0.78 KK 1.24 LA 0.98 ! MK 0.96 NL 1.02 NY 1.04 OV 0.94 ! PT 0.87 SC 0.86 WZ 1.18 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.25 FD 0.77 KK 1.25 KP 1.98 ! LA 0.97 MK 0.97 NL 0.99 NY 1.08 ! OV 0.94 PT 0.88 SC 0.83 WZ 1.16 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.27 FD 0.79 KK 1.26 KP 1.45 ! LA 0.98 MK 0.93 NL 0.95 NY 1.12 ! OV 0.93 PT 0.88 SC 0.79 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! NL 1.09 NY 1.15 SC 0.86 WZ 1.08 ! ZC 1.30 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 0.81 KP 1.00 LA 0.98 ! NL 1.16 NY 1.08 PT 0.97 SC 0.87 ! WZ 1.14 ZC 1.43 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.25 FD 0.77 KP 0.99 LA 0.95 ! NL 1.09 NY 1.09 OV 0.98 PT 0.96 ! SC 0.90 WZ 1.09 ZC 1.45 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.17 FD 0.84 KP 0.97 LA 0.94 ! NL 1.05 NY 1.06 OV 0.97 SC 0.88 ! WZ 1.13 ZC 1.53 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.15 FD 0.75 KK 1.16 KP 1.29 ! LA 0.93 MK 1.00 NL 1.02 NY 1.07 ! OV 0.96 SC 0.88 WZ 1.12 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.20 FD 0.78 KK 1.21 LA 0.98 ! MK 0.97 NL 1.02 NY 1.08 OV 0.93 ! PT 0.92 SC 0.90 WZ 1.19 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.21 FD 0.77 KK 1.18 KP 2.05 ! LA 0.96 MK 0.97 NL 0.98 NY 1.13 ! OV 0.94 PT 0.94 SC 0.86 WZ 1.16 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.25 FD 0.79 KK 1.21 KP 1.46 ! LA 0.98 MK 0.94 NL 0.94 NY 1.16 ! OV 0.92 PT 0.92 SC 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! NL 1.18 NY 1.24 SC 0.85 WZ 1.14 ! ZC 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.29 FD 0.83 KP 0.92 LA 1.03 ! NL 1.21 NY 1.13 PT 1.00 SC 0.91 ! WZ 1.21 ZC 1.22 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.35 FD 0.77 KP 0.93 LA 1.01 ! NL 1.16 NY 1.12 OV 1.03 PT 0.98 ! SC 0.92 WZ 1.17 ZC 1.20 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.26 FD 0.83 KP 0.90 LA 0.99 ! NL 1.09 NY 1.09 OV 1.03 SC 0.92 ! WZ 1.19 ZC 1.29 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.24 FD 0.76 KK 1.24 KP 1.24 ! LA 0.99 MK 1.03 NL 1.07 NY 1.10 ! OV 1.00 SC 0.91 WZ 1.18 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.30 FD 0.79 KK 1.27 LA 1.02 ! MK 0.98 NL 1.08 NY 1.15 OV 0.97 ! PT 0.93 SC 0.92 WZ 1.22 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.31 FD 0.78 KK 1.25 KP 1.84 ! LA 1.02 MK 0.98 NL 1.04 NY 1.19 ! OV 0.98 PT 0.95 SC 0.87 WZ 1.25 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.33 FD 0.80 KK 1.27 KP 1.35 ! LA 1.04 MK 0.95 NL 0.99 NY 1.23 ! OV 0.97 PT 0.93 SC 0.84 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! NL 1.22 NY 1.23 SC 0.86 WZ 1.16 ! ZC 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.28 FD 0.86 KP 1.01 LA 1.05 ! NL 1.28 NY 1.13 PT 0.99 SC 0.92 ! WZ 1.22 ZC 1.30 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* WZ 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.35 FD 0.80 KP 1.00 LA 1.03 ! NL 1.20 NY 1.10 OV 1.00 PT 0.99 ! SC 0.94 WZ 1.19 ZC 1.28 ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.27 FD 0.89 KP 0.99 LA 1.01 ! NL 1.13 NY 1.11 OV 1.01 SC 0.92 ! WZ 1.21 ZC 1.37 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.24 FD 0.79 KK 1.22 KP 1.41 ! LA 1.00 MK 1.06 NL 1.09 NY 1.09 ! OV 1.00 SC 0.93 WZ 1.20 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.28 FD 0.82 KK 1.25 LA 1.05 ! MK 1.02 NL 1.12 NY 1.16 OV 0.98 ! PT 0.93 SC 0.95 WZ 1.24 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.29 FD 0.81 KK 1.23 KP 2.09 ! LA 1.04 MK 1.02 NL 1.07 NY 1.17 ! OV 0.98 PT 0.95 SC 0.93 WZ 1.25 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.30 FD 0.81 KK 1.26 KP 1.49 ! LA 1.07 MK 0.97 NL 1.03 NY 1.22 ! OV 0.97 PT 0.94 SC 0.87 ! ! ! Fit before self-cal, rms=0.726740Jy sigma=24.225711 ! Fit after self-cal, rms=0.383538Jy sigma=8.857544 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.7763 mas, bmaj=1.092 mas, bpa=-10.61 degrees ! Estimated noise=0.407104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0280868 Jy ! Component: 100 - total flux cleaned = -0.0394639 Jy ! Component: 150 - total flux cleaned = -0.0465064 Jy ! Component: 200 - total flux cleaned = -0.0505661 Jy ! Total flux subtracted in 200 components = -0.0505661 Jy ! Clean residual min=-0.025403 max=0.025646 Jy/beam ! Clean residual mean=-0.000007 rms=0.005231 Jy/beam ! Combined flux in latest and established models = 4.53303 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 89 components and 4.53303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372151Jy sigma=8.576803 ! Fit after self-cal, rms=0.371188Jy sigma=8.554527 ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371188Jy sigma=8.554527 ! Fit after self-cal, rms=0.368380Jy sigma=8.492475 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.7768 mas, bmaj=1.09 mas, bpa=-10.48 degrees ! Estimated noise=0.406201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0241396 Jy ! Component: 100 - total flux cleaned = -0.0339379 Jy ! Component: 150 - total flux cleaned = -0.0385741 Jy ! Component: 200 - total flux cleaned = -0.0410962 Jy ! Total flux subtracted in 200 components = -0.0410962 Jy ! Clean residual min=-0.023476 max=0.023452 Jy/beam ! Clean residual mean=-0.000025 rms=0.004919 Jy/beam ! Combined flux in latest and established models = 4.49194 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 4.49194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361223Jy sigma=8.319209 ! Fit after self-cal, rms=0.360289Jy sigma=8.305855 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00708246 Jy ! Component: 100 - total flux cleaned = -0.00930335 Jy ! Component: 150 - total flux cleaned = -0.0120081 Jy ! Component: 200 - total flux cleaned = -0.0138673 Jy ! Total flux subtracted in 200 components = -0.0138673 Jy ! Clean residual min=-0.022464 max=0.022903 Jy/beam ! Clean residual mean=0.000006 rms=0.004865 Jy/beam ! Combined flux in latest and established models = 4.47807 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 4.47807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356804Jy sigma=8.238237 ! Fit after self-cal, rms=0.356370Jy sigma=8.234050 ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Added new window around map position (-3.8, -32.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139423 Jy ! Component: 100 - total flux cleaned = 0.0133448 Jy ! Component: 150 - total flux cleaned = 0.0127885 Jy ! Component: 200 - total flux cleaned = 0.0122389 Jy ! Total flux subtracted in 200 components = 0.0122389 Jy ! Clean residual min=-0.021695 max=0.019602 Jy/beam ! Clean residual mean=-0.000005 rms=0.004763 Jy/beam ! Combined flux in latest and established models = 4.49031 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 104 components and 4.49031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353971Jy sigma=8.168305 ! Fit after self-cal, rms=0.353754Jy sigma=8.164333 ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353754Jy sigma=8.164333 ! Fit after self-cal, rms=0.349366Jy sigma=7.865259 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.7781 mas, bmaj=1.088 mas, bpa=-10.28 degrees ! Estimated noise=0.405729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0221313 Jy ! Component: 100 - total flux cleaned = -0.0289399 Jy ! Component: 150 - total flux cleaned = -0.0315368 Jy ! Component: 200 - total flux cleaned = -0.0332968 Jy ! Total flux subtracted in 200 components = -0.0332968 Jy ! Clean residual min=-0.016947 max=0.016099 Jy/beam ! Clean residual mean=-0.000243 rms=0.003828 Jy/beam ! Combined flux in latest and established models = 4.45701 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 109 components and 4.45701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345709Jy sigma=7.766713 ! Fit after self-cal, rms=0.345108Jy sigma=7.759226 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00506326 Jy ! Component: 100 - total flux cleaned = -0.0066362 Jy ! Component: 150 - total flux cleaned = -0.0085609 Jy ! Component: 200 - total flux cleaned = -0.00946424 Jy ! Total flux subtracted in 200 components = -0.00946424 Jy ! Clean residual min=-0.016040 max=0.015529 Jy/beam ! Clean residual mean=-0.000222 rms=0.003796 Jy/beam ! Combined flux in latest and established models = 4.44755 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 4.44754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343311Jy sigma=7.722420 ! Fit after self-cal, rms=0.343055Jy sigma=7.720642 ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343055Jy sigma=7.720642 ! Fit after self-cal, rms=0.341051Jy sigma=7.671134 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=2.661 mas, bmaj=2.907 mas, bpa=15.83 degrees ! Estimated noise=0.444995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0238231 Jy ! Component: 100 - total flux cleaned = -0.0286068 Jy ! Component: 150 - total flux cleaned = -0.0304432 Jy ! Component: 200 - total flux cleaned = -0.0307012 Jy ! Total flux subtracted in 200 components = -0.0307012 Jy ! Clean residual min=-0.020145 max=0.021938 Jy/beam ! Clean residual mean=-0.000587 rms=0.005979 Jy/beam ! Combined flux in latest and established models = 4.41684 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 4.41684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340133Jy sigma=7.628213 ! Fit after self-cal, rms=0.339780Jy sigma=7.618373 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0033316 Jy ! Component: 100 - total flux cleaned = -0.00424246 Jy ! Component: 150 - total flux cleaned = -0.00422844 Jy ! Component: 200 - total flux cleaned = -0.00379613 Jy ! Total flux subtracted in 200 components = -0.00379613 Jy ! Clean residual min=-0.019975 max=0.021301 Jy/beam ! Clean residual mean=-0.000563 rms=0.005963 Jy/beam ! Combined flux in latest and established models = 4.41305 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 126 components and 4.41305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339880Jy sigma=7.611301 ! Fit after self-cal, rms=0.339707Jy sigma=7.608038 ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.7788 mas, bmaj=1.086 mas, bpa=-10.2 degrees ! Estimated noise=0.405054 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7788 x 1.086 at -10.2 degrees (North through East) ! Clean map min=-0.013722 max=2.794 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339707Jy sigma=7.608038 ! Fit after self-cal, rms=0.419309Jy sigma=4.048864 ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.7795 mas, bmaj=1.087 mas, bpa=-10.46 degrees ! Estimated noise=0.405797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0150853 Jy ! Component: 100 - total flux cleaned = -0.0174542 Jy ! Component: 150 - total flux cleaned = -0.0194786 Jy ! Component: 200 - total flux cleaned = -0.0208642 Jy ! Total flux subtracted in 200 components = -0.0208642 Jy ! Clean residual min=-0.015074 max=0.010089 Jy/beam ! Clean residual mean=-0.000180 rms=0.002666 Jy/beam ! Combined flux in latest and established models = 4.39218 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 129 components and 4.39218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417494Jy sigma=3.933850 ! Fit after self-cal, rms=0.417150Jy sigma=3.923471 ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00378378 Jy ! Component: 100 - total flux cleaned = -0.00550231 Jy ! Component: 150 - total flux cleaned = -0.00672429 Jy ! Component: 200 - total flux cleaned = -0.00827407 Jy ! Total flux subtracted in 200 components = -0.00827407 Jy ! Clean residual min=-0.012732 max=0.011164 Jy/beam ! Clean residual mean=-0.000162 rms=0.002626 Jy/beam ! Combined flux in latest and established models = 4.38391 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 131 components and 4.38391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416170Jy sigma=3.871720 ! Fit after self-cal, rms=0.415972Jy sigma=3.869121 ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.415972Jy sigma=3.869121 ! Fit after self-cal, rms=0.415752Jy sigma=3.825957 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.6611 mas, bmaj=0.9374 mas, bpa=-11.57 degrees ! Estimated noise=0.538084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.19314 Jy ! Component: 100 - total flux cleaned = 2.97567 Jy ! Component: 150 - total flux cleaned = 3.39905 Jy ! Component: 200 - total flux cleaned = 3.66246 Jy ! Total flux subtracted in 200 components = 3.66246 Jy ! Clean residual min=-0.033162 max=0.138966 Jy/beam ! Clean residual mean=0.000322 rms=0.009608 Jy/beam ! Combined flux in latest and established models = 3.66246 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 3.66246 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.7804 mas, bmaj=1.086 mas, bpa=-10.5 degrees ! Estimated noise=0.405966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257457 Jy ! Component: 100 - total flux cleaned = 0.397824 Jy ! Component: 150 - total flux cleaned = 0.484168 Jy ! Component: 200 - total flux cleaned = 0.541887 Jy ! Total flux subtracted in 200 components = 0.541887 Jy ! Clean residual min=-0.014596 max=0.035776 Jy/beam ! Clean residual mean=0.000182 rms=0.004361 Jy/beam ! Combined flux in latest and established models = 4.20435 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 61 components and 4.20435 Jy ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Added new window around map position (0.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409757 Jy ! Component: 100 - total flux cleaned = 0.069391 Jy ! Component: 150 - total flux cleaned = 0.0897586 Jy ! Component: 200 - total flux cleaned = 0.103474 Jy ! Total flux subtracted in 200 components = 0.103474 Jy ! Clean residual min=-0.011039 max=0.011677 Jy/beam ! Clean residual mean=-0.000057 rms=0.002669 Jy/beam ! Combined flux in latest and established models = 4.30782 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 88 components and 4.30782 Jy ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Added new window around map position (-2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719014 Jy ! Component: 100 - total flux cleaned = 0.0116199 Jy ! Component: 150 - total flux cleaned = 0.0148258 Jy ! Component: 200 - total flux cleaned = 0.0181108 Jy ! Total flux subtracted in 200 components = 0.0181108 Jy ! Clean residual min=-0.010457 max=0.009893 Jy/beam ! Clean residual mean=-0.000096 rms=0.002497 Jy/beam ! Combined flux in latest and established models = 4.32593 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 100 components and 4.32593 Jy ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=2.674 mas, bmaj=2.919 mas, bpa=16.34 degrees ! Estimated noise=0.444029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116641 Jy ! Component: 100 - total flux cleaned = 0.0153948 Jy ! Component: 150 - total flux cleaned = 0.0175625 Jy ! Component: 200 - total flux cleaned = 0.018956 Jy ! Total flux subtracted in 200 components = 0.018956 Jy ! Clean residual min=-0.016012 max=0.012147 Jy/beam ! Clean residual mean=-0.000345 rms=0.004098 Jy/beam ! Combined flux in latest and established models = 4.34489 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664935 Jy ! Component: 100 - total flux cleaned = 0.00124422 Jy ! Component: 150 - total flux cleaned = 0.00137119 Jy ! Component: 200 - total flux cleaned = 0.00137297 Jy ! Total flux subtracted in 200 components = 0.00137297 Jy ! Clean residual min=-0.015740 max=0.012177 Jy/beam ! Clean residual mean=-0.000355 rms=0.004065 Jy/beam ! Combined flux in latest and established models = 4.34626 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 130 components and 4.34626 Jy ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! Estimated beam: bmin=0.7804 mas, bmaj=1.086 mas, bpa=-10.5 degrees ! Estimated noise=0.405966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00451154 Jy ! Component: 100 - total flux cleaned = -0.00402868 Jy ! Component: 150 - total flux cleaned = -0.00380103 Jy ! Component: 200 - total flux cleaned = -0.00337369 Jy ! Total flux subtracted in 200 components = -0.00337369 Jy ! Clean residual min=-0.010302 max=0.009165 Jy/beam ! Clean residual mean=-0.000135 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 4.34289 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 136 components and 4.34289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411853Jy sigma=3.632482 ! Fit after self-cal, rms=0.410126Jy sigma=3.563918 wmodel /scr/pima/rdv72_uvs/J0555+3948_X_map.mod ! Writing 136 model components to file: /scr/pima/rdv72_uvs/J0555+3948_X_map.mod wobs /scr/pima/rdv72_uvs/J0555+3948_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J0555+3948_X_uvs.fits wwins /scr/pima/rdv72_uvs/J0555+3948_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rdv72_uvs/J0555+3948_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00317351 Jy ! Component: 100 - total flux cleaned = -0.00526596 Jy ! Component: 150 - total flux cleaned = -0.00659635 Jy ! Component: 200 - total flux cleaned = -0.00788611 Jy ! Component: 250 - total flux cleaned = -0.00898647 Jy ! Component: 300 - total flux cleaned = -0.00960487 Jy ! Component: 350 - total flux cleaned = -0.0100614 Jy ! Component: 400 - total flux cleaned = -0.0102142 Jy ! Component: 450 - total flux cleaned = -0.0103622 Jy ! Component: 500 - total flux cleaned = -0.0103626 Jy ! Component: 550 - total flux cleaned = -0.0105061 Jy ! Component: 600 - total flux cleaned = -0.0107873 Jy ! Component: 650 - total flux cleaned = -0.011063 Jy ! Component: 700 - total flux cleaned = -0.0110616 Jy ! Component: 750 - total flux cleaned = -0.0110632 Jy ! Component: 800 - total flux cleaned = -0.0115977 Jy ! Component: 850 - total flux cleaned = -0.0113301 Jy ! Component: 900 - total flux cleaned = -0.0111994 Jy ! Component: 950 - total flux cleaned = -0.0115896 Jy ! Component: 1000 - total flux cleaned = -0.0115898 Jy ! Component: 1050 - total flux cleaned = -0.0114618 Jy ! Component: 1100 - total flux cleaned = -0.011842 Jy ! Component: 1150 - total flux cleaned = -0.0115905 Jy ! Component: 1200 - total flux cleaned = -0.0115914 Jy ! Component: 1250 - total flux cleaned = -0.0115917 Jy ! Component: 1300 - total flux cleaned = -0.011592 Jy ! Component: 1350 - total flux cleaned = -0.0118348 Jy ! Component: 1400 - total flux cleaned = -0.0120745 Jy ! Component: 1450 - total flux cleaned = -0.0113559 Jy ! Component: 1500 - total flux cleaned = -0.0118331 Jy ! Component: 1550 - total flux cleaned = -0.0123049 Jy ! Component: 1600 - total flux cleaned = -0.0124231 Jy ! Component: 1650 - total flux cleaned = -0.0120752 Jy ! Component: 1700 - total flux cleaned = -0.0125366 Jy ! Component: 1750 - total flux cleaned = -0.0126506 Jy ! Component: 1800 - total flux cleaned = -0.0125363 Jy ! Component: 1850 - total flux cleaned = -0.012763 Jy ! Component: 1900 - total flux cleaned = -0.0125367 Jy ! Component: 1950 - total flux cleaned = -0.0129829 Jy ! Component: 2000 - total flux cleaned = -0.0126496 Jy ! Component: 2050 - total flux cleaned = -0.0128713 Jy ! Component: 2100 - total flux cleaned = -0.0128713 Jy ! Component: 2150 - total flux cleaned = -0.012981 Jy ! Component: 2200 - total flux cleaned = -0.0128733 Jy ! Component: 2250 - total flux cleaned = -0.0133046 Jy ! Component: 2300 - total flux cleaned = -0.013198 Jy ! Component: 2350 - total flux cleaned = -0.0134107 Jy ! Component: 2400 - total flux cleaned = -0.0139398 Jy ! Component: 2450 - total flux cleaned = -0.0136234 Jy ! Component: 2500 - total flux cleaned = -0.0136234 Jy ! Component: 2550 - total flux cleaned = -0.0142483 Jy ! Component: 2600 - total flux cleaned = -0.0141442 Jy ! Component: 2650 - total flux cleaned = -0.0143504 Jy ! Component: 2700 - total flux cleaned = -0.0143496 Jy ! Component: 2750 - total flux cleaned = -0.0143497 Jy ! Component: 2800 - total flux cleaned = -0.0145531 Jy ! Component: 2850 - total flux cleaned = -0.0146546 Jy ! Component: 2900 - total flux cleaned = -0.0148561 Jy ! Component: 2950 - total flux cleaned = -0.0151564 Jy ! Component: 3000 - total flux cleaned = -0.0154547 Jy ! Component: 3050 - total flux cleaned = -0.0152562 Jy ! Component: 3100 - total flux cleaned = -0.0157493 Jy ! Component: 3150 - total flux cleaned = -0.0157483 Jy ! Component: 3200 - total flux cleaned = -0.0159443 Jy ! Component: 3250 - total flux cleaned = -0.0158473 Jy ! Component: 3300 - total flux cleaned = -0.0164285 Jy ! Component: 3350 - total flux cleaned = -0.016718 Jy ! Component: 3400 - total flux cleaned = -0.0167181 Jy ! Component: 3450 - total flux cleaned = -0.0172915 Jy ! Component: 3500 - total flux cleaned = -0.0172914 Jy ! Component: 3550 - total flux cleaned = -0.0176704 Jy ! Component: 3600 - total flux cleaned = -0.0177653 Jy ! Component: 3650 - total flux cleaned = -0.0182349 Jy ! Component: 3700 - total flux cleaned = -0.0183276 Jy ! Component: 3750 - total flux cleaned = -0.0184206 Jy ! Component: 3800 - total flux cleaned = -0.0187913 Jy ! Component: 3850 - total flux cleaned = -0.0191612 Jy ! Component: 3900 - total flux cleaned = -0.0191616 Jy ! Component: 3950 - total flux cleaned = -0.0196204 Jy ! Component: 4000 - total flux cleaned = -0.0202593 Jy ! Component: 4050 - total flux cleaned = -0.0201688 Jy ! Total flux subtracted in 4096 components = -0.0204404 Jy ! Clean residual min=-0.005768 max=0.004909 Jy/beam ! Clean residual mean=-0.000079 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 4.32245 Jy keep ! Adding 365 model components to the UV plane model. ! The established model now contains 499 components and 4.32245 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J0555+3948_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7804 x 1.086 at -10.5 degrees (North through East) ! Clean map min=-0.012337 max=2.8241 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J0555+3948_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.82408 invert ! Inverting map ! Your choice of large map pixels excluded 3.78% of the data. ! The x-axis pixel size should ideally be below 0.171 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00155034 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.164692 0.164692 0.329383 0.658766 1.31753 2.63507 5.27013 10.5403 21.0805 42.161 84.3221 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.824 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J0555+3948_X_uvs.log closed on Sat Oct 5 08:45:25 2013