! Started logfile: /scr/pima/rdv72_uvs/J0529-2515_S_uvs.log on Sat Oct 5 08:44:53 2013 obs /scr/pima/rdv72_uvs/J0529-2515_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv72_uvs/J0529-2515_S_uva.fits ! AN table 1: 23 integrations on 28 of 28 possible baselines. ! AN table 2: 23 integrations on 55 of 55 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0529-2515 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7636 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv72_uvs/J0529-2515_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.029670Jy sigma=2.581624 ! Fit after self-cal, rms=0.805283Jy sigma=2.020259 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.591 mas, bmaj=3.141 mas, bpa=-47.14 degrees ! Estimated noise=6.22867 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170794 Jy ! Component: 100 - total flux cleaned = 0.205148 Jy ! Total flux subtracted in 100 components = 0.205148 Jy ! Clean residual min=-0.012666 max=0.018031 Jy/beam ! Clean residual mean=0.000008 rms=0.003455 Jy/beam ! Combined flux in latest and established models = 0.205148 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.205148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125156Jy sigma=0.270794 ! Fit after self-cal, rms=0.125140Jy sigma=0.270784 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=3.852 mas, bpa=-37.64 degrees ! Estimated noise=3.31595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00895531 Jy ! Component: 100 - total flux cleaned = -0.00950243 Jy ! Component: 150 - total flux cleaned = -0.0097416 Jy ! Component: 200 - total flux cleaned = -0.00993459 Jy ! Total flux subtracted in 200 components = -0.00993459 Jy ! Clean residual min=-0.010038 max=0.009986 Jy/beam ! Clean residual mean=0.000060 rms=0.002573 Jy/beam ! Combined flux in latest and established models = 0.195213 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.195213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123803Jy sigma=0.267897 ! Fit after self-cal, rms=0.123766Jy sigma=0.267881 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.99 KP 1.14 LA 1.08 ! MK 0.99 NL 0.94 OV 0.98 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.17 FD 0.99 HO 0.82 KK 0.83 ! KP 1.46 LA 1.05 MK 0.88 NL 0.94 ! OV 1.01 PT 1.05 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.08 KP 1.18 LA 0.96 ! MK 1.04 NL 1.05 OV 1.04 SC 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 1.07 HO 0.93 KK 0.80 ! KP 1.38 LA 0.98 MK 0.99 NL 1.00 ! OV 1.00 PT 1.04 SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.08 KP 1.19 LA 0.92 ! MK 1.08 NL 1.04 OV 1.06 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.21 FD 1.13 HO 0.82 KK 0.79 ! KP 1.48 LA 0.91 MK 0.93 NL 1.01 ! OV 1.09 PT 1.08 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.31 FD 1.09 KP 1.00 LA 0.75 ! MK 1.13 NL 0.97 OV 0.99 SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.57 FD 1.05 HO 0.94 KK 0.84 ! KP 1.16 LA 0.79 MK 1.10 NL 0.97 ! OV 0.92 PT 0.94 SC 1.06 ! ! ! Fit before self-cal, rms=0.123766Jy sigma=0.267881 ! Fit after self-cal, rms=0.094940Jy sigma=0.215275 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.174 mas, bmaj=3.815 mas, bpa=-39.53 degrees ! Estimated noise=3.27158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238866 Jy ! Component: 100 - total flux cleaned = 0.00260069 Jy ! Component: 150 - total flux cleaned = 0.00267954 Jy ! Component: 200 - total flux cleaned = 0.00276925 Jy ! Total flux subtracted in 200 components = 0.00276925 Jy ! Clean residual min=-0.002956 max=0.002787 Jy/beam ! Clean residual mean=0.000010 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.197982 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 0.197982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094877Jy sigma=0.215064 ! Fit after self-cal, rms=0.095483Jy sigma=0.213593 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095483Jy sigma=0.213593 ! Fit after self-cal, rms=0.095582Jy sigma=0.213490 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.169 mas, bmaj=3.806 mas, bpa=-39.42 degrees ! Estimated noise=3.2716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012748 Jy ! Component: 100 - total flux cleaned = 0.0013718 Jy ! Component: 150 - total flux cleaned = 0.00142142 Jy ! Component: 200 - total flux cleaned = 0.00146119 Jy ! Total flux subtracted in 200 components = 0.00146119 Jy ! Clean residual min=-0.002901 max=0.002796 Jy/beam ! Clean residual mean=0.000006 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.199444 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.199444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095558Jy sigma=0.213422 ! Fit after self-cal, rms=0.095587Jy sigma=0.213419 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.09621e-05 Jy ! Component: 100 - total flux cleaned = 3.45474e-05 Jy ! Component: 150 - total flux cleaned = 4.67661e-05 Jy ! Component: 200 - total flux cleaned = 5.77725e-05 Jy ! Total flux subtracted in 200 components = 5.77725e-05 Jy ! Clean residual min=-0.002895 max=0.002768 Jy/beam ! Clean residual mean=0.000006 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.199501 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.199501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095581Jy sigma=0.213413 ! Fit after self-cal, rms=0.095582Jy sigma=0.213412 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095582Jy sigma=0.213412 ! Fit after self-cal, rms=0.095552Jy sigma=0.213381 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=3.803 mas, bpa=-39.28 degrees ! Estimated noise=3.26835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575709 Jy ! Component: 100 - total flux cleaned = 0.000660413 Jy ! Component: 150 - total flux cleaned = 0.000705498 Jy ! Component: 200 - total flux cleaned = 0.000729464 Jy ! Total flux subtracted in 200 components = 0.000729464 Jy ! Clean residual min=-0.002838 max=0.002806 Jy/beam ! Clean residual mean=0.000003 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.200231 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.200231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095538Jy sigma=0.213365 ! Fit after self-cal, rms=0.095540Jy sigma=0.213364 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.73135e-06 Jy ! Component: 100 - total flux cleaned = 2.96243e-05 Jy ! Component: 150 - total flux cleaned = 4.70242e-05 Jy ! Component: 200 - total flux cleaned = 6.2114e-05 Jy ! Total flux subtracted in 200 components = 6.2114e-05 Jy ! Clean residual min=-0.002835 max=0.002802 Jy/beam ! Clean residual mean=0.000003 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.200293 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.200293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095536Jy sigma=0.213363 ! Fit after self-cal, rms=0.095538Jy sigma=0.213363 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095538Jy sigma=0.213363 ! Fit after self-cal, rms=0.095541Jy sigma=0.213347 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.169 mas, bmaj=18.51 mas, bpa=-0.8853 degrees ! Estimated noise=4.7013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.66701e-05 Jy ! Component: 100 - total flux cleaned = -8.6837e-05 Jy ! Component: 150 - total flux cleaned = -8.68996e-05 Jy ! Component: 200 - total flux cleaned = -9.46951e-05 Jy ! Total flux subtracted in 200 components = -9.46951e-05 Jy ! Clean residual min=-0.003048 max=0.003076 Jy/beam ! Clean residual mean=0.000001 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.200198 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 32 components and 0.200198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095538Jy sigma=0.213349 ! Fit after self-cal, rms=0.095538Jy sigma=0.213348 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.78096e-05 Jy ! Component: 100 - total flux cleaned = -1.77217e-05 Jy ! Component: 150 - total flux cleaned = -2.50204e-05 Jy ! Component: 200 - total flux cleaned = -3.82559e-05 Jy ! Total flux subtracted in 200 components = -3.82559e-05 Jy ! Clean residual min=-0.003048 max=0.003086 Jy/beam ! Clean residual mean=0.000001 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.20016 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 33 components and 0.20016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095537Jy sigma=0.213352 ! Fit after self-cal, rms=0.095537Jy sigma=0.213352 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.169 mas, bmaj=3.804 mas, bpa=-39.13 degrees ! Estimated noise=3.26581 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.169 x 3.804 at -39.13 degrees (North through East) ! Clean map min=-0.0025389 max=0.20736 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.569 mas, bmaj=3.158 mas, bpa=-48.31 degrees ! Estimated noise=5.90585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161922 Jy ! Component: 100 - total flux cleaned = 0.197232 Jy ! Component: 150 - total flux cleaned = 0.197291 Jy ! Component: 200 - total flux cleaned = 0.196673 Jy ! Total flux subtracted in 200 components = 0.196673 Jy ! Clean residual min=-0.006124 max=0.005559 Jy/beam ! Clean residual mean=-0.000028 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.196673 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.196673 Jy ! Inverting map and beam ! Estimated beam: bmin=2.169 mas, bmaj=3.804 mas, bpa=-39.13 degrees ! Estimated noise=3.26581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229993 Jy ! Component: 100 - total flux cleaned = 0.00229556 Jy ! Component: 150 - total flux cleaned = 0.00237074 Jy ! Component: 200 - total flux cleaned = 0.00243741 Jy ! Total flux subtracted in 200 components = 0.00243741 Jy ! Clean residual min=-0.002917 max=0.002928 Jy/beam ! Clean residual mean=0.000001 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.199111 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.199111 Jy ! Inverting map ! Added new window around map position (109, -117.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840638 Jy ! Component: 100 - total flux cleaned = 0.000405255 Jy ! Component: 150 - total flux cleaned = 0.000282228 Jy ! Component: 200 - total flux cleaned = 0.000223902 Jy ! Total flux subtracted in 200 components = 0.000223902 Jy ! Clean residual min=-0.002806 max=0.002808 Jy/beam ! Clean residual mean=0.000001 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.199335 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.199335 Jy ! Inverting map ! Added new window around map position (-56, -115.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124755 Jy ! Component: 100 - total flux cleaned = 0.00106422 Jy ! Component: 150 - total flux cleaned = 0.000951167 Jy ! Component: 200 - total flux cleaned = 0.000797122 Jy ! Total flux subtracted in 200 components = 0.000797122 Jy ! Clean residual min=-0.002612 max=0.002578 Jy/beam ! Clean residual mean=0.000001 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.200132 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.200132 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.169 mas, bmaj=18.51 mas, bpa=-0.8853 degrees ! Estimated noise=4.7013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000922289 Jy ! Component: 100 - total flux cleaned = -0.00113446 Jy ! Component: 150 - total flux cleaned = -0.0012249 Jy ! Component: 200 - total flux cleaned = -0.00129284 Jy ! Total flux subtracted in 200 components = -0.00129284 Jy ! Clean residual min=-0.002735 max=0.002925 Jy/beam ! Clean residual mean=0.000007 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.198839 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.89247e-05 Jy ! Component: 100 - total flux cleaned = -0.000111266 Jy ! Component: 150 - total flux cleaned = -0.000171544 Jy ! Component: 200 - total flux cleaned = -0.00021571 Jy ! Total flux subtracted in 200 components = -0.00021571 Jy ! Clean residual min=-0.002708 max=0.002893 Jy/beam ! Clean residual mean=0.000007 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.198623 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.198623 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.169 mas, bmaj=3.804 mas, bpa=-39.13 degrees ! Estimated noise=3.26581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131078 Jy ! Component: 100 - total flux cleaned = 8.15604e-05 Jy ! Component: 150 - total flux cleaned = 0.000127917 Jy ! Component: 200 - total flux cleaned = 0.000128126 Jy ! Total flux subtracted in 200 components = 0.000128126 Jy ! Clean residual min=-0.002554 max=0.002550 Jy/beam ! Clean residual mean=0.000002 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.198751 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 0.198751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095347Jy sigma=0.212808 ! Fit after self-cal, rms=0.095331Jy sigma=0.212765 wmodel /scr/pima/rdv72_uvs/J0529-2515_S_map.mod ! Writing 67 model components to file: /scr/pima/rdv72_uvs/J0529-2515_S_map.mod wobs /scr/pima/rdv72_uvs/J0529-2515_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv72_uvs/J0529-2515_S_uvs.fits wwins /scr/pima/rdv72_uvs/J0529-2515_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rdv72_uvs/J0529-2515_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019216 Jy ! Component: 100 - total flux cleaned = 6.06549e-05 Jy ! Component: 150 - total flux cleaned = -0.000152182 Jy ! Component: 200 - total flux cleaned = -0.000521516 Jy ! Component: 250 - total flux cleaned = -0.000600503 Jy ! Component: 300 - total flux cleaned = -0.000716144 Jy ! Component: 350 - total flux cleaned = -0.00094351 Jy ! Component: 400 - total flux cleaned = -0.00116691 Jy ! Component: 450 - total flux cleaned = -0.00153132 Jy ! Component: 500 - total flux cleaned = -0.00171018 Jy ! Component: 550 - total flux cleaned = -0.00195692 Jy ! Component: 600 - total flux cleaned = -0.00230323 Jy ! Component: 650 - total flux cleaned = -0.0025418 Jy ! Component: 700 - total flux cleaned = -0.00281055 Jy ! Component: 750 - total flux cleaned = -0.00300866 Jy ! Component: 800 - total flux cleaned = -0.00320411 Jy ! Component: 850 - total flux cleaned = -0.00339702 Jy ! Component: 900 - total flux cleaned = -0.00358701 Jy ! Component: 950 - total flux cleaned = -0.00374351 Jy ! Component: 1000 - total flux cleaned = -0.00402206 Jy ! Component: 1050 - total flux cleaned = -0.00417473 Jy ! Component: 1100 - total flux cleaned = -0.00435569 Jy ! Component: 1150 - total flux cleaned = -0.0045348 Jy ! Component: 1200 - total flux cleaned = -0.00468202 Jy ! Component: 1250 - total flux cleaned = -0.00476904 Jy ! Component: 1300 - total flux cleaned = -0.00491367 Jy ! Component: 1350 - total flux cleaned = -0.00488485 Jy ! Component: 1400 - total flux cleaned = -0.00499825 Jy ! Component: 1450 - total flux cleaned = -0.00494194 Jy ! Component: 1500 - total flux cleaned = -0.00494213 Jy ! Component: 1550 - total flux cleaned = -0.00491464 Jy ! Component: 1600 - total flux cleaned = -0.00488769 Jy ! Component: 1650 - total flux cleaned = -0.00494201 Jy ! Component: 1700 - total flux cleaned = -0.00499544 Jy ! Component: 1750 - total flux cleaned = -0.00496825 Jy ! Component: 1800 - total flux cleaned = -0.00494202 Jy ! Component: 1850 - total flux cleaned = -0.00486335 Jy ! Component: 1900 - total flux cleaned = -0.0048895 Jy ! Component: 1950 - total flux cleaned = -0.0049412 Jy ! Component: 2000 - total flux cleaned = -0.00499193 Jy ! Component: 2050 - total flux cleaned = -0.00499213 Jy ! Component: 2100 - total flux cleaned = -0.00499203 Jy ! Component: 2150 - total flux cleaned = -0.00499216 Jy ! Component: 2200 - total flux cleaned = -0.00509163 Jy ! Component: 2250 - total flux cleaned = -0.00516501 Jy ! Component: 2300 - total flux cleaned = -0.00511609 Jy ! Component: 2350 - total flux cleaned = -0.00511578 Jy ! Component: 2400 - total flux cleaned = -0.00511565 Jy ! Component: 2450 - total flux cleaned = -0.00513973 Jy ! Component: 2500 - total flux cleaned = -0.00513986 Jy ! Component: 2550 - total flux cleaned = -0.00516342 Jy ! Component: 2600 - total flux cleaned = -0.00518685 Jy ! Component: 2650 - total flux cleaned = -0.00516334 Jy ! Component: 2700 - total flux cleaned = -0.0051404 Jy ! Component: 2750 - total flux cleaned = -0.00511739 Jy ! Component: 2800 - total flux cleaned = -0.00514033 Jy ! Component: 2850 - total flux cleaned = -0.00513994 Jy ! Component: 2900 - total flux cleaned = -0.00516265 Jy ! Component: 2950 - total flux cleaned = -0.0051176 Jy ! Component: 3000 - total flux cleaned = -0.00511765 Jy ! Component: 3050 - total flux cleaned = -0.00507338 Jy ! Component: 3100 - total flux cleaned = -0.0050736 Jy ! Component: 3150 - total flux cleaned = -0.00507351 Jy ! Component: 3200 - total flux cleaned = -0.00513892 Jy ! Component: 3250 - total flux cleaned = -0.00507377 Jy ! Component: 3300 - total flux cleaned = -0.00513848 Jy ! Component: 3350 - total flux cleaned = -0.00511703 Jy ! Component: 3400 - total flux cleaned = -0.00511714 Jy ! Component: 3450 - total flux cleaned = -0.00507476 Jy ! Component: 3500 - total flux cleaned = -0.00515902 Jy ! Component: 3550 - total flux cleaned = -0.00517989 Jy ! Component: 3600 - total flux cleaned = -0.00515905 Jy ! Component: 3650 - total flux cleaned = -0.0051174 Jy ! Component: 3700 - total flux cleaned = -0.00515863 Jy ! Component: 3750 - total flux cleaned = -0.00515859 Jy ! Component: 3800 - total flux cleaned = -0.00511771 Jy ! Component: 3850 - total flux cleaned = -0.0051584 Jy ! Component: 3900 - total flux cleaned = -0.00513816 Jy ! Component: 3950 - total flux cleaned = -0.00517855 Jy ! Component: 4000 - total flux cleaned = -0.00517859 Jy ! Component: 4050 - total flux cleaned = -0.00521846 Jy ! Total flux subtracted in 4096 components = -0.00517877 Jy ! Clean residual min=-0.001365 max=0.001207 Jy/beam ! Clean residual mean=0.000003 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.193572 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 342 components and 0.193572 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv72_uvs/J0529-2515_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.169 x 3.804 at -39.13 degrees (North through East) ! Clean map min=-0.0026975 max=0.20421 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv72_uvs/J0529-2515_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.20421 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000328774 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.482995 0.482995 0.965989 1.93198 3.86396 7.72791 15.4558 30.9116 61.8233 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.204 quit ! Quitting program ! Log file /scr/pima/rdv72_uvs/J0529-2515_S_uvs.log closed on Sat Oct 5 08:44:57 2013