! Started logfile: J1037-2934_S_2008_07_09_pus_uvs.log on Wed Oct 13 13:14:54 2010
obs J1037-2934_S_2008_07_09_pus_uva.fits
! Reading UV FITS file: J1037-2934_S_2008_07_09_pus_uva.fits
! AN table 1: 23 integrations on 105 of 105 possible baselines.
! Apparent sampling: 0.0960663 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1037-2934
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1054 lines of history.
! 
! Reading 928 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 266 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 266 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 266 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 266 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.538568Jy  sigma=0.004454
! Fit after  self-cal, rms=0.315185Jy  sigma=0.002444
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=13.92 mas, bpa=2.801 degrees
! Estimated noise=3544.88 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.815515 Jy
! Component: 100  -  total flux cleaned = 1.02956 Jy
! Total flux subtracted in 100 components = 1.02956 Jy
! Clean residual min=-0.053448 max=0.100260 Jy/beam
! Clean residual mean=0.007174 rms=0.028577 Jy/beam
! Combined flux in latest and established models = 1.02956 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 1.02956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.288645Jy  sigma=0.002260
! Fit after  self-cal, rms=0.288336Jy  sigma=0.002259
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.353 mas, bmaj=17.34 mas, bpa=2.169 degrees
! Estimated noise=2898.75 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147328 Jy
! Component: 100  -  total flux cleaned = 0.222203 Jy
! Component: 150  -  total flux cleaned = 0.26114 Jy
! Component: 200  -  total flux cleaned = 0.270308 Jy
! Total flux subtracted in 200 components = 0.270308 Jy
! Clean residual min=-0.023492 max=0.023979 Jy/beam
! Clean residual mean=-0.000658 rms=0.011603 Jy/beam
! Combined flux in latest and established models = 1.29987 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 56 components and 1.29987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201050Jy  sigma=0.001505
! Fit after  self-cal, rms=0.200022Jy  sigma=0.001503
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.00     HH        1.00*    HN        1.00*    
!   KK        0.96     KP        0.99     LA        1.02     MK        0.96     
!   NL        1.00*    NY        1.00*    ON        1.00*    PT        1.02     
!   SC        1.00*    WZ        1.00*    ZC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HH        1.00*    HN        1.00*    
!   KK        0.89     KP        1.05     LA        1.01     MK        0.95     
!   NL        1.00*    NY        1.00*    ON        1.00*    PT        1.03     
!   SC        1.00*    WZ        1.00*    ZC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HH        1.00*    HN        1.00*    
!   KK        0.95     KP        1.00     LA        1.00     MK        0.94     
!   NL        1.00*    NY        1.00*    ON        1.00*    PT        1.03     
!   SC        1.00*    WZ        1.00*    ZC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.25     FD        0.99     HH        1.00*    HN        1.00*    
!   KK        0.92     KP        0.96     LA        1.02     MK        0.96     
!   NL        1.00*    NY        1.00*    ON        1.00*    PT        0.98     
!   SC        1.00*    WZ        1.00*    ZC        1.00*    
! 
! 
! Fit before self-cal, rms=0.200022Jy  sigma=0.001503
! Fit after  self-cal, rms=0.170872Jy  sigma=0.001277
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.314 mas, bmaj=17.39 mas, bpa=2.072 degrees
! Estimated noise=2808.56 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.029205 Jy
! Component: 100  -  total flux cleaned = 0.0292062 Jy
! Component: 150  -  total flux cleaned = 0.0312468 Jy
! Component: 200  -  total flux cleaned = 0.0325569 Jy
! Total flux subtracted in 200 components = 0.0325569 Jy
! Clean residual min=-0.006995 max=0.007027 Jy/beam
! Clean residual mean=-0.000589 rms=0.003238 Jy/beam
! Combined flux in latest and established models = 1.33243 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 118 components and 1.33243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164222Jy  sigma=0.001225
! Fit after  self-cal, rms=0.163835Jy  sigma=0.001224
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163835Jy  sigma=0.001224
! Fit after  self-cal, rms=0.162825Jy  sigma=0.001221
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=17.43 mas, bpa=2.048 degrees
! Estimated noise=2804.13 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00323926 Jy
! Component: 100  -  total flux cleaned = 0.00271091 Jy
! Component: 150  -  total flux cleaned = 0.00180675 Jy
! Component: 200  -  total flux cleaned = 0.000405683 Jy
! Total flux subtracted in 200 components = 0.000405683 Jy
! Clean residual min=-0.003096 max=0.003121 Jy/beam
! Clean residual mean=-0.000251 rms=0.001383 Jy/beam
! Combined flux in latest and established models = 1.33283 Jy
selfcal
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 168 components and 1.33283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161730Jy  sigma=0.001213
! Fit after  self-cal, rms=0.161689Jy  sigma=0.001213
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00126434 Jy
! Component: 100  -  total flux cleaned = -0.00206775 Jy
! Component: 150  -  total flux cleaned = -0.00295014 Jy
! Component: 200  -  total flux cleaned = -0.0037834 Jy
! Total flux subtracted in 200 components = -0.0037834 Jy
! Clean residual min=-0.002241 max=0.002286 Jy/beam
! Clean residual mean=-0.000090 rms=0.000960 Jy/beam
! Combined flux in latest and established models = 1.32905 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 208 components and 1.32905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161338Jy  sigma=0.001211
! Fit after  self-cal, rms=0.161355Jy  sigma=0.001211
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161355Jy  sigma=0.001211
! Fit after  self-cal, rms=0.161196Jy  sigma=0.001210
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.304 mas, bmaj=17.44 mas, bpa=2.041 degrees
! Estimated noise=2803.39 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119399 Jy
! Component: 100  -  total flux cleaned = -0.000245028 Jy
! Component: 150  -  total flux cleaned = -0.000793712 Jy
! Component: 200  -  total flux cleaned = -0.00128595 Jy
! Total flux subtracted in 200 components = -0.00128595 Jy
! Clean residual min=-0.001564 max=0.001543 Jy/beam
! Clean residual mean=-0.000043 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 1.32776 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 253 components and 1.32776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160964Jy  sigma=0.001209
! Fit after  self-cal, rms=0.160978Jy  sigma=0.001209
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000413121 Jy
! Component: 100  -  total flux cleaned = -0.0005025 Jy
! Component: 150  -  total flux cleaned = -0.000587971 Jy
! Component: 200  -  total flux cleaned = -0.000508633 Jy
! Total flux subtracted in 200 components = -0.000508633 Jy
! Clean residual min=-0.001321 max=0.001309 Jy/beam
! Clean residual mean=-0.000004 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 1.32726 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 286 components and 1.32726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160862Jy  sigma=0.001208
! Fit after  self-cal, rms=0.160883Jy  sigma=0.001208
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160883Jy  sigma=0.001208
! Fit after  self-cal, rms=0.160793Jy  sigma=0.001208
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.573 mas, bmaj=19.16 mas, bpa=11.97 degrees
! Estimated noise=3739.33 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119586 Jy
! Component: 100  -  total flux cleaned = 0.000908265 Jy
! Component: 150  -  total flux cleaned = 0.000776858 Jy
! Component: 200  -  total flux cleaned = 0.00077639 Jy
! Total flux subtracted in 200 components = 0.00077639 Jy
! Clean residual min=-0.001008 max=0.001003 Jy/beam
! Clean residual mean=-0.000052 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 1.32803 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 315 components and 1.32803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160751Jy  sigma=0.001208
! Fit after  self-cal, rms=0.160747Jy  sigma=0.001208
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00032028 Jy
! Component: 100  -  total flux cleaned = -0.000482595 Jy
! Component: 150  -  total flux cleaned = -0.000639044 Jy
! Component: 200  -  total flux cleaned = -0.000792494 Jy
! Total flux subtracted in 200 components = -0.000792494 Jy
! Clean residual min=-0.000838 max=0.000836 Jy/beam
! Clean residual mean=-0.000051 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 1.32724 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 346 components and 1.32724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160705Jy  sigma=0.001208
! Fit after  self-cal, rms=0.160709Jy  sigma=0.001208
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.303 mas, bmaj=17.45 mas, bpa=2.038 degrees
! Estimated noise=2802.9 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.303 x 17.45 at 2.038 degrees (North through East)
! Clean map  min=-0.0091482  max=1.0328 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160709Jy  sigma=0.001208
! Fit after  self-cal, rms=0.152981Jy  sigma=0.001071
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=17.44 mas, bpa=2.035 degrees
! Estimated noise=2807.7 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253446 Jy
! Component: 100  -  total flux cleaned = 0.00404127 Jy
! Component: 150  -  total flux cleaned = 0.00507525 Jy
! Component: 200  -  total flux cleaned = 0.00569642 Jy
! Total flux subtracted in 200 components = 0.00569642 Jy
! Clean residual min=-0.001224 max=0.001225 Jy/beam
! Clean residual mean=-0.000011 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 1.33294 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 386 components and 1.33294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152870Jy  sigma=0.001070
! Fit after  self-cal, rms=0.152892Jy  sigma=0.001070
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.96338e-05 Jy
! Component: 100  -  total flux cleaned = 0.000275383 Jy
! Component: 150  -  total flux cleaned = 0.000578396 Jy
! Component: 200  -  total flux cleaned = 0.000747792 Jy
! Total flux subtracted in 200 components = 0.000747792 Jy
! Clean residual min=-0.000915 max=0.000916 Jy/beam
! Clean residual mean=0.000017 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 1.33368 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 430 components and 1.33368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152835Jy  sigma=0.001070
! Fit after  self-cal, rms=0.152851Jy  sigma=0.001070
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152851Jy  sigma=0.001070
! Fit after  self-cal, rms=0.152953Jy  sigma=0.001070
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.047 mas, bmaj=14.1 mas, bpa=2.703 degrees
! Estimated noise=3421.16 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.786782 Jy
! Component: 100  -  total flux cleaned = 1.00374 Jy
! Component: 150  -  total flux cleaned = 1.12455 Jy
! Component: 200  -  total flux cleaned = 1.19768 Jy
! Total flux subtracted in 200 components = 1.19768 Jy
! Clean residual min=-0.024021 max=0.037901 Jy/beam
! Clean residual mean=0.003226 rms=0.011316 Jy/beam
! Combined flux in latest and established models = 1.19768 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 1.19768 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=17.44 mas, bpa=2.034 degrees
! Estimated noise=2807.8 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.056835 Jy
! Component: 100  -  total flux cleaned = 0.0863682 Jy
! Component: 150  -  total flux cleaned = 0.0974832 Jy
! Component: 200  -  total flux cleaned = 0.106936 Jy
! Total flux subtracted in 200 components = 0.106936 Jy
! Clean residual min=-0.010057 max=0.010115 Jy/beam
! Clean residual mean=0.001458 rms=0.004667 Jy/beam
! Combined flux in latest and established models = 1.30462 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 68 components and 1.30462 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.575 mas, bmaj=19.16 mas, bpa=12 degrees
! Estimated noise=3740.86 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0217187 Jy
! Component: 100  -  total flux cleaned = 0.0250334 Jy
! Component: 150  -  total flux cleaned = 0.0256306 Jy
! Component: 200  -  total flux cleaned = 0.0256269 Jy
! Total flux subtracted in 200 components = 0.0256269 Jy
! Clean residual min=-0.009001 max=0.009012 Jy/beam
! Clean residual mean=0.000440 rms=0.004529 Jy/beam
! Combined flux in latest and established models = 1.33025 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.81783e-05 Jy
! Component: 100  -  total flux cleaned = 0.000512704 Jy
! Component: 150  -  total flux cleaned = 0.00105638 Jy
! Component: 200  -  total flux cleaned = 0.00213973 Jy
! Total flux subtracted in 200 components = 0.00213973 Jy
! Clean residual min=-0.009034 max=0.009196 Jy/beam
! Clean residual mean=0.000056 rms=0.004075 Jy/beam
! Combined flux in latest and established models = 1.33239 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 152 components and 1.33239 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=17.44 mas, bpa=2.034 degrees
! Estimated noise=2807.8 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.86884e-05 Jy
! Component: 100  -  total flux cleaned = 0.00120801 Jy
! Component: 150  -  total flux cleaned = 0.00256882 Jy
! Component: 200  -  total flux cleaned = 0.0043592 Jy
! Total flux subtracted in 200 components = 0.0043592 Jy
! Clean residual min=-0.007443 max=0.007437 Jy/beam
! Clean residual mean=-0.000389 rms=0.002883 Jy/beam
! Combined flux in latest and established models = 1.33675 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 172 components and 1.33675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154791Jy  sigma=0.001087
! Fit after  self-cal, rms=0.154908Jy  sigma=0.001086
wmodel J1037-2934_S_2008_07_09_pus_map.mod
! Writing 172 model components to file: J1037-2934_S_2008_07_09_pus_map.mod
wobs J1037-2934_S_2008_07_09_pus_uvs.fits
! Writing UV FITS file: J1037-2934_S_2008_07_09_pus_uvs.fits
wwins J1037-2934_S_2008_07_09_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
wmap "J1037-2934_S_2008_07_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.307 x 17.44 at 2.034 degrees (North through East)
! Clean map  min=-0.014581  max=1.0344 Jy/beam
! Writing clean map to FITS file: J1037-2934_S_2008_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.03437 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00305137 
device "J1037-2934_S_2008_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1037-2934_S_2008_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.884996 0.884996 1.76999 3.53999 7.07997 14.1599 28.3199 56.6398
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0091 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.034 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.307 x 17.44 at 2.034 degrees (North through East)
! Clean map  min=-0.014581  max=1.0344 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1037-2934_S_2008_07_09_pus\_map.gif/vgif"
! Attempting to open device: 'J1037-2934_S_2008_07_09_pus_map.gif/vgif'
mapplot cln
quit
! Quitting program
! Log file J1037-2934_S_2008_07_09_pus_uvs.log closed on Wed Oct 13 13:14:56 2010