! Started logfile: J0811+0146_X_2008_07_09_pus_uvs.log on Sun Oct 10 20:17:14 2010
obs J0811+0146_X_2008_07_09_pus_uva.fits
! Reading UV FITS file: J0811+0146_X_2008_07_09_pus_uva.fits
! AN table 1: 165 integrations on 105 of 105 possible baselines.
! Apparent sampling: 0.0873882 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0811+0146
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1142 lines of history.
! 
! Reading 6056 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 256 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1721 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1721 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1721 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1721 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.810126Jy  sigma=0.005906
! Fit after  self-cal, rms=0.725304Jy  sigma=0.005445
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8936 mas, bmaj=1.971 mas, bpa=-17.11 degrees
! Estimated noise=1707.17 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.238459 Jy
! Component: 100  -  total flux cleaned = 0.290498 Jy
! Total flux subtracted in 100 components = 0.290498 Jy
! Clean residual min=-0.009335 max=0.014781 Jy/beam
! Clean residual mean=0.000327 rms=0.003706 Jy/beam
! Combined flux in latest and established models = 0.290498 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.290498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.210019Jy  sigma=0.001175
! Fit after  self-cal, rms=0.210001Jy  sigma=0.001175
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.085 mas, bmaj=2.122 mas, bpa=-4.774 degrees
! Estimated noise=1246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013593 Jy
! Component: 100  -  total flux cleaned = 0.0207024 Jy
! Component: 150  -  total flux cleaned = 0.0242152 Jy
! Component: 200  -  total flux cleaned = 0.025094 Jy
! Total flux subtracted in 200 components = 0.025094 Jy
! Clean residual min=-0.007217 max=0.006845 Jy/beam
! Clean residual mean=-0.000000 rms=0.002277 Jy/beam
! Combined flux in latest and established models = 0.315592 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.315592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.208991Jy  sigma=0.001167
! Fit after  self-cal, rms=0.208920Jy  sigma=0.001167
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     HH        1.00*    HN        1.00*    
!   KK        1.01     KP        1.06     LA        0.99     MK        0.98     
!   NL        1.00*    NY        1.05     ON        0.90     PT        1.05     
!   SC        1.00*    WZ        0.98     ZC        1.05     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HH        1.00*    HN        1.00*    
!   KK        1.00     KP        0.98     LA        0.94     MK        0.99     
!   NL        1.00*    NY        1.04     ON        0.94     PT        1.06     
!   SC        1.00*    WZ        1.01     ZC        1.08     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HH        1.00*    HN        1.00*    
!   KK        0.99     KP        1.00     LA        0.97     MK        0.98     
!   NL        1.00*    NY        0.99     ON        0.99     PT        1.02     
!   SC        1.00*    WZ        1.00     ZC        1.06     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HH        1.00*    HN        1.00*    
!   KK        0.92     KP        1.00     LA        0.97     MK        1.08     
!   NL        1.00*    NY        1.06     ON        0.92     PT        1.05     
!   SC        1.00*    WZ        1.04     ZC        0.97     
! 
! 
! Fit before self-cal, rms=0.208920Jy  sigma=0.001167
! Fit after  self-cal, rms=0.205743Jy  sigma=0.001160
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.086 mas, bmaj=2.129 mas, bpa=-5.336 degrees
! Estimated noise=1244.55 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000922492 Jy
! Component: 100  -  total flux cleaned = 0.00118916 Jy
! Component: 150  -  total flux cleaned = 0.00124532 Jy
! Component: 200  -  total flux cleaned = 0.0011525 Jy
! Total flux subtracted in 200 components = 0.0011525 Jy
! Clean residual min=-0.003225 max=0.004521 Jy/beam
! Clean residual mean=0.000204 rms=0.001228 Jy/beam
! Combined flux in latest and established models = 0.316744 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 23 components and 0.316744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205690Jy  sigma=0.001159
! Fit after  self-cal, rms=0.205637Jy  sigma=0.001159
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205637Jy  sigma=0.001159
! Fit after  self-cal, rms=0.205767Jy  sigma=0.001159
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.085 mas, bmaj=2.129 mas, bpa=-5.48 degrees
! Estimated noise=1244.97 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000596909 Jy
! Component: 100  -  total flux cleaned = 0.000644765 Jy
! Component: 150  -  total flux cleaned = 0.000562008 Jy
! Component: 200  -  total flux cleaned = 0.000523456 Jy
! Total flux subtracted in 200 components = 0.000523456 Jy
! Clean residual min=-0.003159 max=0.004342 Jy/beam
! Clean residual mean=0.000217 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.317268 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 24 components and 0.317268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205736Jy  sigma=0.001159
! Fit after  self-cal, rms=0.205749Jy  sigma=0.001159
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.98468e-05 Jy
! Component: 100  -  total flux cleaned = 3.46003e-06 Jy
! Component: 150  -  total flux cleaned = -6.25759e-05 Jy
! Component: 200  -  total flux cleaned = -9.15284e-05 Jy
! Total flux subtracted in 200 components = -9.15284e-05 Jy
! Clean residual min=-0.003053 max=0.004087 Jy/beam
! Clean residual mean=0.000219 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.317176 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 25 components and 0.317176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205732Jy  sigma=0.001159
! Fit after  self-cal, rms=0.205732Jy  sigma=0.001159
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205732Jy  sigma=0.001159
! Fit after  self-cal, rms=0.206176Jy  sigma=0.001159
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.084 mas, bmaj=2.13 mas, bpa=-5.635 degrees
! Estimated noise=1245.64 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00038713 Jy
! Component: 100  -  total flux cleaned = 0.000386589 Jy
! Component: 150  -  total flux cleaned = 0.000322688 Jy
! Component: 200  -  total flux cleaned = 0.000292915 Jy
! Total flux subtracted in 200 components = 0.000292915 Jy
! Clean residual min=-0.003119 max=0.003987 Jy/beam
! Clean residual mean=0.000223 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.317469 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 26 components and 0.317469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206157Jy  sigma=0.001159
! Fit after  self-cal, rms=0.206170Jy  sigma=0.001159
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.20679e-05 Jy
! Component: 100  -  total flux cleaned = 3.9928e-06 Jy
! Component: 150  -  total flux cleaned = -4.70186e-05 Jy
! Component: 200  -  total flux cleaned = -7.15005e-05 Jy
! Total flux subtracted in 200 components = -7.15005e-05 Jy
! Clean residual min=-0.003084 max=0.003828 Jy/beam
! Clean residual mean=0.000224 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.317398 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.317398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206161Jy  sigma=0.001159
! Fit after  self-cal, rms=0.206161Jy  sigma=0.001159
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206161Jy  sigma=0.001159
! Fit after  self-cal, rms=0.206424Jy  sigma=0.001159
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.981 mas, bmaj=4.114 mas, bpa=28.23 degrees
! Estimated noise=1547.11 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000504226 Jy
! Component: 100  -  total flux cleaned = 0.000700043 Jy
! Component: 150  -  total flux cleaned = 0.000815595 Jy
! Component: 200  -  total flux cleaned = 0.000815975 Jy
! Total flux subtracted in 200 components = 0.000815975 Jy
! Clean residual min=-0.002742 max=0.002913 Jy/beam
! Clean residual mean=0.000442 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.318213 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 31 components and 0.318213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206417Jy  sigma=0.001159
! Fit after  self-cal, rms=0.206424Jy  sigma=0.001159
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.12805e-05 Jy
! Component: 100  -  total flux cleaned = 1.29953e-05 Jy
! Component: 150  -  total flux cleaned = 1.42297e-05 Jy
! Component: 200  -  total flux cleaned = 3.26928e-05 Jy
! Total flux subtracted in 200 components = 3.26928e-05 Jy
! Clean residual min=-0.002673 max=0.002889 Jy/beam
! Clean residual mean=0.000440 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.318246 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 32 components and 0.318246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206425Jy  sigma=0.001159
! Fit after  self-cal, rms=0.206425Jy  sigma=0.001159
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.13 mas, bpa=-5.762 degrees
! Estimated noise=1245.93 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.082 x 2.13 at -5.762 degrees (North through East)
! Clean map  min=-0.0038003  max=0.30345 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8876 mas, bmaj=1.983 mas, bpa=-17.52 degrees
! Estimated noise=1681.67 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.234644 Jy
! Component: 100  -  total flux cleaned = 0.285813 Jy
! Component: 150  -  total flux cleaned = 0.298128 Jy
! Component: 200  -  total flux cleaned = 0.305048 Jy
! Total flux subtracted in 200 components = 0.305048 Jy
! Clean residual min=-0.005935 max=0.007136 Jy/beam
! Clean residual mean=0.000281 rms=0.002239 Jy/beam
! Combined flux in latest and established models = 0.305048 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.305048 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.13 mas, bpa=-5.762 degrees
! Estimated noise=1245.93 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00668478 Jy
! Component: 100  -  total flux cleaned = 0.00948196 Jy
! Component: 150  -  total flux cleaned = 0.010628 Jy
! Component: 200  -  total flux cleaned = 0.0113294 Jy
! Total flux subtracted in 200 components = 0.0113294 Jy
! Clean residual min=-0.003540 max=0.004536 Jy/beam
! Clean residual mean=0.000253 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.316377 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 36 components and 0.316377 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.981 mas, bmaj=4.114 mas, bpa=28.23 degrees
! Estimated noise=1547.11 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013487 Jy
! Component: 100  -  total flux cleaned = 0.00172136 Jy
! Component: 150  -  total flux cleaned = 0.00199081 Jy
! Component: 200  -  total flux cleaned = 0.0020778 Jy
! Total flux subtracted in 200 components = 0.0020778 Jy
! Clean residual min=-0.003081 max=0.003865 Jy/beam
! Clean residual mean=0.000431 rms=0.001220 Jy/beam
! Combined flux in latest and established models = 0.318455 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.62534e-07 Jy
! Component: 100  -  total flux cleaned = 1.08615e-06 Jy
! Component: 150  -  total flux cleaned = -2.94151e-05 Jy
! Component: 200  -  total flux cleaned = -3.00938e-05 Jy
! Total flux subtracted in 200 components = -3.00938e-05 Jy
! Clean residual min=-0.002919 max=0.003583 Jy/beam
! Clean residual mean=0.000432 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.318425 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 45 components and 0.318425 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.13 mas, bpa=-5.762 degrees
! Estimated noise=1245.93 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000179409 Jy
! Component: 100  -  total flux cleaned = -0.000315798 Jy
! Component: 150  -  total flux cleaned = -0.000315651 Jy
! Component: 200  -  total flux cleaned = -0.000361368 Jy
! Total flux subtracted in 200 components = -0.000361368 Jy
! Clean residual min=-0.003098 max=0.003769 Jy/beam
! Clean residual mean=0.000215 rms=0.001097 Jy/beam
! Combined flux in latest and established models = 0.318063 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 51 components and 0.318063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206431Jy  sigma=0.001159
! Fit after  self-cal, rms=0.206433Jy  sigma=0.001159
wmodel J0811+0146_X_2008_07_09_pus_map.mod
! Writing 51 model components to file: J0811+0146_X_2008_07_09_pus_map.mod
wobs J0811+0146_X_2008_07_09_pus_uvs.fits
! Writing UV FITS file: J0811+0146_X_2008_07_09_pus_uvs.fits
wwins J0811+0146_X_2008_07_09_pus_map.win
! wwins: Wrote 1 windows to J0811+0146_X_2008_07_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109347 Jy
! Component: 100  -  total flux cleaned = 0.00141771 Jy
! Component: 150  -  total flux cleaned = 0.00196574 Jy
! Component: 200  -  total flux cleaned = 0.00248702 Jy
! Component: 250  -  total flux cleaned = 0.00298608 Jy
! Component: 300  -  total flux cleaned = 0.00351205 Jy
! Component: 350  -  total flux cleaned = 0.00401948 Jy
! Component: 400  -  total flux cleaned = 0.00442846 Jy
! Component: 450  -  total flux cleaned = 0.0048647 Jy
! Component: 500  -  total flux cleaned = 0.00532686 Jy
! Component: 550  -  total flux cleaned = 0.00577698 Jy
! Component: 600  -  total flux cleaned = 0.00621603 Jy
! Component: 650  -  total flux cleaned = 0.00668014 Jy
! Component: 700  -  total flux cleaned = 0.0070981 Jy
! Component: 750  -  total flux cleaned = 0.00747256 Jy
! Component: 800  -  total flux cleaned = 0.00780638 Jy
! Component: 850  -  total flux cleaned = 0.00816534 Jy
! Component: 900  -  total flux cleaned = 0.00845344 Jy
! Component: 950  -  total flux cleaned = 0.00876778 Jy
! Component: 1000  -  total flux cleaned = 0.00910735 Jy
! Total flux subtracted in 1024 components = 0.00922908 Jy
! Clean residual min=-0.002092 max=0.001811 Jy/beam
! Clean residual mean=0.000088 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.327292 Jy
keep
! Adding 49 model components to the UV plane model.
! The established model now contains 100 components and 0.327292 Jy
wmap "J0811+0146_X_2008_07_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.082 x 2.13 at -5.762 degrees (North through East)
! Clean map  min=-0.0029961  max=0.30292 Jy/beam
! Writing clean map to FITS file: J0811+0146_X_2008_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.302918 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000624793 
device "J0811+0146_X_2008_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0811+0146_X_2008_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.618774 0.618774 1.23755 2.47509 4.95019 9.90038 19.8008 39.6015 79.203
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0018 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.302 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.082 x 2.13 at -5.762 degrees (North through East)
! Clean map  min=-0.0029961  max=0.30292 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0811+0146_X_2008_07_09_pus\_map.gif/vgif"
! Attempting to open device: 'J0811+0146_X_2008_07_09_pus_map.gif/vgif'
mapplot cln
quit
! Quitting program
! Log file J0811+0146_X_2008_07_09_pus_uvs.log closed on Sun Oct 10 20:17:16 2010