! Started logfile: J0527-2307_S_2008_07_09_pus_uvs.log on Wed Oct 13 13:13:18 2010
obs J0527-2307_S_2008_07_09_pus_uva.fits
! Reading UV FITS file: J0527-2307_S_2008_07_09_pus_uva.fits
! AN table 1: 98 integrations on 105 of 105 possible baselines.
! Apparent sampling: 0.316521 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0527-2307
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1054 lines of history.
! 
! Reading 13028 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 622 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 622 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 622 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 622 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.896557Jy  sigma=0.007042
! Fit after  self-cal, rms=0.860410Jy  sigma=0.006769
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.526 mas, bmaj=6.789 mas, bpa=-10.49 degrees
! Estimated noise=2187.36 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.1194 Jy
! Component: 100  -  total flux cleaned = 0.14568 Jy
! Total flux subtracted in 100 components = 0.14568 Jy
! Clean residual min=-0.008173 max=0.009343 Jy/beam
! Clean residual mean=-0.000087 rms=0.002636 Jy/beam
! Combined flux in latest and established models = 0.14568 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.14568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158503Jy  sigma=0.001192
! Fit after  self-cal, rms=0.158435Jy  sigma=0.001192
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.961 mas, bmaj=7.785 mas, bpa=-9.985 degrees
! Estimated noise=794.433 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00763993 Jy
! Component: 100  -  total flux cleaned = 0.0109258 Jy
! Component: 150  -  total flux cleaned = 0.0124575 Jy
! Component: 200  -  total flux cleaned = 0.0127096 Jy
! Total flux subtracted in 200 components = 0.0127097 Jy
! Clean residual min=-0.005868 max=0.007823 Jy/beam
! Clean residual mean=-0.000118 rms=0.002110 Jy/beam
! Combined flux in latest and established models = 0.158389 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 22 components and 0.158389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158097Jy  sigma=0.001189
! Fit after  self-cal, rms=0.158127Jy  sigma=0.001189
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     HH        1.00*    HN        0.96     
!   KK        1.00*    KP        1.02     LA        0.97     MK        1.03     
!   NL        0.94     NY        1.00*    ON        1.00*    PT        1.09     
!   SC        0.95     WZ        1.00*    ZC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HH        1.00*    HN        1.02     
!   KK        1.00*    KP        1.10     LA        0.93     MK        0.99     
!   NL        0.93     NY        1.00*    ON        1.00*    PT        1.08     
!   SC        1.04     WZ        1.00*    ZC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HH        1.00*    HN        1.02     
!   KK        1.00*    KP        0.98     LA        0.98     MK        1.00     
!   NL        0.99     NY        1.00*    ON        1.00*    PT        1.16     
!   SC        1.04     WZ        1.00*    ZC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.93     HH        1.00*    HN        1.03     
!   KK        1.00*    KP        1.02     LA        0.98     MK        0.97     
!   NL        1.00     NY        1.00*    ON        1.00*    PT        1.12     
!   SC        1.02     WZ        1.00*    ZC        1.00*    
! 
! 
! Fit before self-cal, rms=0.158127Jy  sigma=0.001189
! Fit after  self-cal, rms=0.157560Jy  sigma=0.001185
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.966 mas, bmaj=7.77 mas, bpa=-10.11 degrees
! Estimated noise=791.885 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000310114 Jy
! Component: 100  -  total flux cleaned = -0.000344883 Jy
! Component: 150  -  total flux cleaned = -0.000374705 Jy
! Component: 200  -  total flux cleaned = -0.00042768 Jy
! Total flux subtracted in 200 components = -0.00042768 Jy
! Clean residual min=-0.004582 max=0.006758 Jy/beam
! Clean residual mean=-0.000055 rms=0.001650 Jy/beam
! Combined flux in latest and established models = 0.157962 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 28 components and 0.157962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157548Jy  sigma=0.001185
! Fit after  self-cal, rms=0.157619Jy  sigma=0.001185
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157619Jy  sigma=0.001185
! Fit after  self-cal, rms=0.157707Jy  sigma=0.001184
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.967 mas, bmaj=7.764 mas, bpa=-10.09 degrees
! Estimated noise=791.265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000215587 Jy
! Component: 100  -  total flux cleaned = -0.000239438 Jy
! Component: 150  -  total flux cleaned = -0.000282894 Jy
! Component: 200  -  total flux cleaned = -0.00030295 Jy
! Total flux subtracted in 200 components = -0.00030295 Jy
! Clean residual min=-0.004559 max=0.006653 Jy/beam
! Clean residual mean=-0.000055 rms=0.001636 Jy/beam
! Combined flux in latest and established models = 0.157659 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.157659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157701Jy  sigma=0.001184
! Fit after  self-cal, rms=0.157711Jy  sigma=0.001184
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.4923e-05 Jy
! Component: 100  -  total flux cleaned = -6.49901e-05 Jy
! Component: 150  -  total flux cleaned = -8.28224e-05 Jy
! Component: 200  -  total flux cleaned = -8.2999e-05 Jy
! Total flux subtracted in 200 components = -8.2999e-05 Jy
! Clean residual min=-0.004567 max=0.006594 Jy/beam
! Clean residual mean=-0.000055 rms=0.001633 Jy/beam
! Combined flux in latest and established models = 0.157576 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 34 components and 0.157576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157708Jy  sigma=0.001184
! Fit after  self-cal, rms=0.157706Jy  sigma=0.001184
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157706Jy  sigma=0.001184
! Fit after  self-cal, rms=0.157740Jy  sigma=0.001184
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.967 mas, bmaj=7.762 mas, bpa=-10.09 degrees
! Estimated noise=791.085 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.94469e-05 Jy
! Component: 100  -  total flux cleaned = -0.000131591 Jy
! Component: 150  -  total flux cleaned = -0.000146901 Jy
! Component: 200  -  total flux cleaned = -0.000161239 Jy
! Total flux subtracted in 200 components = -0.000161239 Jy
! Clean residual min=-0.004577 max=0.006572 Jy/beam
! Clean residual mean=-0.000056 rms=0.001629 Jy/beam
! Combined flux in latest and established models = 0.157415 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 35 components and 0.157415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157737Jy  sigma=0.001184
! Fit after  self-cal, rms=0.157738Jy  sigma=0.001184
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.93921e-05 Jy
! Component: 100  -  total flux cleaned = -6.32685e-05 Jy
! Component: 150  -  total flux cleaned = -7.61134e-05 Jy
! Component: 200  -  total flux cleaned = -7.64975e-05 Jy
! Total flux subtracted in 200 components = -7.64975e-05 Jy
! Clean residual min=-0.004587 max=0.006533 Jy/beam
! Clean residual mean=-0.000056 rms=0.001628 Jy/beam
! Combined flux in latest and established models = 0.157338 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.157338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157736Jy  sigma=0.001184
! Fit after  self-cal, rms=0.157734Jy  sigma=0.001184
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157734Jy  sigma=0.001184
! Fit after  self-cal, rms=0.157818Jy  sigma=0.001184
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.803 mas, bmaj=15.98 mas, bpa=-3.595 degrees
! Estimated noise=1002.96 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0003753 Jy
! Component: 100  -  total flux cleaned = -0.000397848 Jy
! Component: 150  -  total flux cleaned = -0.000419532 Jy
! Component: 200  -  total flux cleaned = -0.000439776 Jy
! Total flux subtracted in 200 components = -0.000439776 Jy
! Clean residual min=-0.006330 max=0.010890 Jy/beam
! Clean residual mean=-0.000122 rms=0.002885 Jy/beam
! Combined flux in latest and established models = 0.156898 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 44 components and 0.156898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157821Jy  sigma=0.001184
! Fit after  self-cal, rms=0.157817Jy  sigma=0.001184
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.84117e-05 Jy
! Component: 100  -  total flux cleaned = -2.52773e-05 Jy
! Component: 150  -  total flux cleaned = -4.36665e-05 Jy
! Component: 200  -  total flux cleaned = -7.71313e-05 Jy
! Total flux subtracted in 200 components = -7.71313e-05 Jy
! Clean residual min=-0.006289 max=0.010874 Jy/beam
! Clean residual mean=-0.000122 rms=0.002880 Jy/beam
! Combined flux in latest and established models = 0.156821 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 46 components and 0.156821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157821Jy  sigma=0.001184
! Fit after  self-cal, rms=0.157818Jy  sigma=0.001184
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.967 mas, bmaj=7.762 mas, bpa=-10.11 degrees
! Estimated noise=791.212 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.967 x 7.762 at -10.11 degrees (North through East)
! Clean map  min=-0.0043889  max=0.15519 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.533 mas, bmaj=6.766 mas, bpa=-10.69 degrees
! Estimated noise=2160.34 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117753 Jy
! Component: 100  -  total flux cleaned = 0.143721 Jy
! Component: 150  -  total flux cleaned = 0.151068 Jy
! Component: 200  -  total flux cleaned = 0.153877 Jy
! Total flux subtracted in 200 components = 0.153877 Jy
! Clean residual min=-0.007701 max=0.007884 Jy/beam
! Clean residual mean=-0.000005 rms=0.002367 Jy/beam
! Combined flux in latest and established models = 0.153877 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.153877 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.967 mas, bmaj=7.762 mas, bpa=-10.11 degrees
! Estimated noise=791.212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00463103 Jy
! Component: 100  -  total flux cleaned = 0.00475913 Jy
! Component: 150  -  total flux cleaned = 0.00451087 Jy
! Component: 200  -  total flux cleaned = 0.00429907 Jy
! Total flux subtracted in 200 components = 0.00429907 Jy
! Clean residual min=-0.004483 max=0.006918 Jy/beam
! Clean residual mean=-0.000053 rms=0.001652 Jy/beam
! Combined flux in latest and established models = 0.158176 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 0.158176 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.803 mas, bmaj=15.98 mas, bpa=-3.595 degrees
! Estimated noise=1002.96 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000873115 Jy
! Component: 100  -  total flux cleaned = -0.000874619 Jy
! Component: 150  -  total flux cleaned = -0.000873616 Jy
! Component: 200  -  total flux cleaned = -0.000945464 Jy
! Total flux subtracted in 200 components = -0.000945464 Jy
! Clean residual min=-0.006233 max=0.010818 Jy/beam
! Clean residual mean=-0.000120 rms=0.002884 Jy/beam
! Combined flux in latest and established models = 0.157231 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.43753e-05 Jy
! Component: 100  -  total flux cleaned = -8.50087e-05 Jy
! Component: 150  -  total flux cleaned = -0.00014014 Jy
! Component: 200  -  total flux cleaned = -0.00017385 Jy
! Total flux subtracted in 200 components = -0.00017385 Jy
! Clean residual min=-0.006189 max=0.010770 Jy/beam
! Clean residual mean=-0.000120 rms=0.002876 Jy/beam
! Combined flux in latest and established models = 0.157057 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 39 components and 0.157057 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.967 mas, bmaj=7.762 mas, bpa=-10.11 degrees
! Estimated noise=791.212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00056313 Jy
! Component: 100  -  total flux cleaned = 0.000374724 Jy
! Component: 150  -  total flux cleaned = 0.000283326 Jy
! Component: 200  -  total flux cleaned = 0.000203399 Jy
! Total flux subtracted in 200 components = 0.000203399 Jy
! Clean residual min=-0.004450 max=0.006482 Jy/beam
! Clean residual mean=-0.000054 rms=0.001626 Jy/beam
! Combined flux in latest and established models = 0.15726 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 45 components and 0.15726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157823Jy  sigma=0.001184
! Fit after  self-cal, rms=0.157835Jy  sigma=0.001184
wmodel J0527-2307_S_2008_07_09_pus_map.mod
! Writing 45 model components to file: J0527-2307_S_2008_07_09_pus_map.mod
wobs J0527-2307_S_2008_07_09_pus_uvs.fits
! Writing UV FITS file: J0527-2307_S_2008_07_09_pus_uvs.fits
wwins J0527-2307_S_2008_07_09_pus_map.win
! wwins: Wrote 1 windows to J0527-2307_S_2008_07_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00284911 Jy
! Component: 100  -  total flux cleaned = 0.00509814 Jy
! Component: 150  -  total flux cleaned = 0.00615049 Jy
! Component: 200  -  total flux cleaned = 0.00665893 Jy
! Component: 250  -  total flux cleaned = 0.00699633 Jy
! Component: 300  -  total flux cleaned = 0.0069354 Jy
! Component: 350  -  total flux cleaned = 0.00693639 Jy
! Component: 400  -  total flux cleaned = 0.0067675 Jy
! Component: 450  -  total flux cleaned = 0.00671469 Jy
! Component: 500  -  total flux cleaned = 0.00650631 Jy
! Component: 550  -  total flux cleaned = 0.00630644 Jy
! Component: 600  -  total flux cleaned = 0.00616246 Jy
! Component: 650  -  total flux cleaned = 0.00606991 Jy
! Component: 700  -  total flux cleaned = 0.00602578 Jy
! Component: 750  -  total flux cleaned = 0.00606906 Jy
! Component: 800  -  total flux cleaned = 0.00602676 Jy
! Component: 850  -  total flux cleaned = 0.00602693 Jy
! Component: 900  -  total flux cleaned = 0.00606779 Jy
! Component: 950  -  total flux cleaned = 0.00610767 Jy
! Component: 1000  -  total flux cleaned = 0.00614624 Jy
! Component: 1050  -  total flux cleaned = 0.00614611 Jy
! Component: 1100  -  total flux cleaned = 0.00611045 Jy
! Component: 1150  -  total flux cleaned = 0.00614523 Jy
! Component: 1200  -  total flux cleaned = 0.00604459 Jy
! Component: 1250  -  total flux cleaned = 0.00604546 Jy
! Component: 1300  -  total flux cleaned = 0.00601337 Jy
! Component: 1350  -  total flux cleaned = 0.00585707 Jy
! Component: 1400  -  total flux cleaned = 0.00573608 Jy
! Component: 1450  -  total flux cleaned = 0.00549769 Jy
! Component: 1500  -  total flux cleaned = 0.00541078 Jy
! Component: 1550  -  total flux cleaned = 0.00523881 Jy
! Component: 1600  -  total flux cleaned = 0.00515427 Jy
! Component: 1650  -  total flux cleaned = 0.00507149 Jy
! Component: 1700  -  total flux cleaned = 0.00501733 Jy
! Component: 1750  -  total flux cleaned = 0.00488426 Jy
! Component: 1800  -  total flux cleaned = 0.0047803 Jy
! Component: 1850  -  total flux cleaned = 0.0047037 Jy
! Component: 1900  -  total flux cleaned = 0.00467861 Jy
! Component: 1950  -  total flux cleaned = 0.0045787 Jy
! Component: 2000  -  total flux cleaned = 0.00445684 Jy
! Total flux subtracted in 2048 components = 0.00443315 Jy
! Clean residual min=-0.001439 max=0.001236 Jy/beam
! Clean residual mean=-0.000013 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.161694 Jy
keep
! Adding 158 model components to the UV plane model.
! The established model now contains 203 components and 0.161694 Jy
wmap "J0527-2307_S_2008_07_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.967 x 7.762 at -10.11 degrees (North through East)
! Clean map  min=-0.0024467  max=0.15507 Jy/beam
! Writing clean map to FITS file: J0527-2307_S_2008_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.155069 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000523264 
device "J0527-2307_S_2008_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0527-2307_S_2008_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.01232 1.01232 2.02463 4.04927 8.09854 16.1971 32.3941 64.7883
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.155 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.967 x 7.762 at -10.11 degrees (North through East)
! Clean map  min=-0.0024467  max=0.15507 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0527-2307_S_2008_07_09_pus\_map.gif/vgif"
! Attempting to open device: 'J0527-2307_S_2008_07_09_pus_map.gif/vgif'
mapplot cln
quit
! Quitting program
! Log file J0527-2307_S_2008_07_09_pus_uvs.log closed on Wed Oct 13 13:13:21 2010