! Started logfile: J0526-2342_X_2008_07_09_pus_uvs.log on Sun Oct 10 20:16:35 2010
obs J0526-2342_X_2008_07_09_pus_uva.fits
! Reading UV FITS file: J0526-2342_X_2008_07_09_pus_uva.fits
! AN table 1: 104 integrations on 105 of 105 possible baselines.
! Apparent sampling: 0.318773 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0526-2342
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1142 lines of history.
! 
! Reading 13924 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 256 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 657 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 657 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 657 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 657 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.969809Jy  sigma=0.008415
! Fit after  self-cal, rms=0.908842Jy  sigma=0.007897
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7055 mas, bmaj=1.875 mas, bpa=-12.7 degrees
! Estimated noise=1613.03 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0801671 Jy
! Component: 100  -  total flux cleaned = 0.102446 Jy
! Total flux subtracted in 100 components = 0.102446 Jy
! Clean residual min=-0.008306 max=0.010514 Jy/beam
! Clean residual mean=0.000257 rms=0.003102 Jy/beam
! Combined flux in latest and established models = 0.102446 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.102446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145572Jy  sigma=0.001230
! Fit after  self-cal, rms=0.145319Jy  sigma=0.001227
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7866 mas, bmaj=2.08 mas, bpa=-11.35 degrees
! Estimated noise=692.425 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120558 Jy
! Component: 100  -  total flux cleaned = 0.0180325 Jy
! Component: 150  -  total flux cleaned = 0.0211986 Jy
! Component: 200  -  total flux cleaned = 0.0229178 Jy
! Total flux subtracted in 200 components = 0.0229178 Jy
! Clean residual min=-0.003518 max=0.004784 Jy/beam
! Clean residual mean=0.000047 rms=0.001160 Jy/beam
! Combined flux in latest and established models = 0.125364 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 22 components and 0.125364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144420Jy  sigma=0.001219
! Fit after  self-cal, rms=0.144352Jy  sigma=0.001218
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.96     HH        1.00*    HN        1.03     
!   KK        1.00*    KP        1.00     LA        0.99     MK        1.08     
!   NL        1.13     NY        1.00*    ON        1.00*    PT        0.99     
!   SC        1.05     WZ        1.00*    ZC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HH        1.00*    HN        0.94     
!   KK        1.00*    KP        0.97     LA        0.94     MK        1.16     
!   NL        1.11     NY        1.00*    ON        1.00*    PT        1.01     
!   SC        1.03     WZ        1.00*    ZC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.87     HH        1.00*    HN        1.07     
!   KK        1.00*    KP        1.01     LA        1.01     MK        0.98     
!   NL        1.09     NY        1.00*    ON        1.00*    PT        1.04     
!   SC        1.02     WZ        1.00*    ZC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.97     HH        1.00*    HN        0.91     
!   KK        1.00*    KP        0.99     LA        0.97     MK        0.88     
!   NL        1.03     NY        1.00*    ON        1.00*    PT        1.14     
!   SC        0.97     WZ        1.00*    ZC        1.00*    
! 
! 
! Fit before self-cal, rms=0.144352Jy  sigma=0.001218
! Fit after  self-cal, rms=0.142640Jy  sigma=0.001216
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7901 mas, bmaj=2.088 mas, bpa=-11.3 degrees
! Estimated noise=689.251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132314 Jy
! Component: 100  -  total flux cleaned = 0.00143265 Jy
! Component: 150  -  total flux cleaned = 0.00143423 Jy
! Component: 200  -  total flux cleaned = 0.00148021 Jy
! Total flux subtracted in 200 components = 0.00148021 Jy
! Clean residual min=-0.002875 max=0.003472 Jy/beam
! Clean residual mean=-0.000000 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.126844 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 26 components and 0.126844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142599Jy  sigma=0.001215
! Fit after  self-cal, rms=0.142660Jy  sigma=0.001215
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142660Jy  sigma=0.001215
! Fit after  self-cal, rms=0.143268Jy  sigma=0.001215
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7884 mas, bmaj=2.089 mas, bpa=-11.39 degrees
! Estimated noise=692.085 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109141 Jy
! Component: 100  -  total flux cleaned = 0.00113319 Jy
! Component: 150  -  total flux cleaned = 0.00117185 Jy
! Component: 200  -  total flux cleaned = 0.00120371 Jy
! Total flux subtracted in 200 components = 0.00120371 Jy
! Clean residual min=-0.002769 max=0.003097 Jy/beam
! Clean residual mean=0.000010 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.128047 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 26 components and 0.128047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143244Jy  sigma=0.001215
! Fit after  self-cal, rms=0.143232Jy  sigma=0.001214
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227325 Jy
! Component: 100  -  total flux cleaned = 0.000261472 Jy
! Component: 150  -  total flux cleaned = 0.000291165 Jy
! Component: 200  -  total flux cleaned = 0.000317067 Jy
! Total flux subtracted in 200 components = 0.000317067 Jy
! Clean residual min=-0.002773 max=0.002991 Jy/beam
! Clean residual mean=0.000004 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.128365 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 26 components and 0.128365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143220Jy  sigma=0.001214
! Fit after  self-cal, rms=0.143210Jy  sigma=0.001214
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143210Jy  sigma=0.001214
! Fit after  self-cal, rms=0.142857Jy  sigma=0.001214
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7855 mas, bmaj=2.088 mas, bpa=-11.51 degrees
! Estimated noise=691.452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000836284 Jy
! Component: 100  -  total flux cleaned = 0.00086277 Jy
! Component: 150  -  total flux cleaned = 0.000886849 Jy
! Component: 200  -  total flux cleaned = 0.000908742 Jy
! Total flux subtracted in 200 components = 0.000908742 Jy
! Clean residual min=-0.002705 max=0.002875 Jy/beam
! Clean residual mean=0.000008 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.129273 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.129273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142847Jy  sigma=0.001214
! Fit after  self-cal, rms=0.142832Jy  sigma=0.001214
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001255 Jy
! Component: 100  -  total flux cleaned = 0.000149861 Jy
! Component: 150  -  total flux cleaned = 0.000149396 Jy
! Component: 200  -  total flux cleaned = 0.000130086 Jy
! Total flux subtracted in 200 components = 0.000130086 Jy
! Clean residual min=-0.002672 max=0.002865 Jy/beam
! Clean residual mean=0.000007 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.129403 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.129403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142826Jy  sigma=0.001214
! Fit after  self-cal, rms=0.142821Jy  sigma=0.001214
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142821Jy  sigma=0.001214
! Fit after  self-cal, rms=0.142555Jy  sigma=0.001214
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.183 mas, bmaj=4.488 mas, bpa=-4.799 degrees
! Estimated noise=924.258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000779842 Jy
! Component: 100  -  total flux cleaned = 0.000784453 Jy
! Component: 150  -  total flux cleaned = 0.000786061 Jy
! Component: 200  -  total flux cleaned = 0.000756015 Jy
! Total flux subtracted in 200 components = 0.000756015 Jy
! Clean residual min=-0.002742 max=0.003535 Jy/beam
! Clean residual mean=0.000012 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.130159 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 34 components and 0.130159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142563Jy  sigma=0.001214
! Fit after  self-cal, rms=0.142544Jy  sigma=0.001214
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.59304e-06 Jy
! Component: 100  -  total flux cleaned = 4.42036e-06 Jy
! Component: 150  -  total flux cleaned = 5.7153e-06 Jy
! Component: 200  -  total flux cleaned = -1.00462e-05 Jy
! Total flux subtracted in 200 components = -1.00462e-05 Jy
! Clean residual min=-0.002740 max=0.003505 Jy/beam
! Clean residual mean=0.000011 rms=0.000909 Jy/beam
! Combined flux in latest and established models = 0.130149 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 35 components and 0.130149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142555Jy  sigma=0.001214
! Fit after  self-cal, rms=0.142543Jy  sigma=0.001214
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7832 mas, bmaj=2.087 mas, bpa=-11.6 degrees
! Estimated noise=690.924 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7832 x 2.087 at -11.6 degrees (North through East)
! Clean map  min=-0.002738  max=0.098668 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7019 mas, bmaj=1.883 mas, bpa=-12.92 degrees
! Estimated noise=1611.49 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0793936 Jy
! Component: 100  -  total flux cleaned = 0.104181 Jy
! Component: 150  -  total flux cleaned = 0.117853 Jy
! Component: 200  -  total flux cleaned = 0.125952 Jy
! Total flux subtracted in 200 components = 0.125952 Jy
! Clean residual min=-0.007273 max=0.006312 Jy/beam
! Clean residual mean=0.000076 rms=0.002537 Jy/beam
! Combined flux in latest and established models = 0.125952 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.125952 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7832 mas, bmaj=2.087 mas, bpa=-11.6 degrees
! Estimated noise=690.924 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032448 Jy
! Component: 100  -  total flux cleaned = 0.00391258 Jy
! Component: 150  -  total flux cleaned = 0.00395739 Jy
! Component: 200  -  total flux cleaned = 0.00395786 Jy
! Total flux subtracted in 200 components = 0.00395786 Jy
! Clean residual min=-0.003032 max=0.003246 Jy/beam
! Clean residual mean=0.000016 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.12991 Jy
! Adding 7 model components to the UV plane model.
! The established model now contains 20 components and 0.12991 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.183 mas, bmaj=4.488 mas, bpa=-4.799 degrees
! Estimated noise=924.258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000823073 Jy
! Component: 100  -  total flux cleaned = 0.000749999 Jy
! Component: 150  -  total flux cleaned = 0.000692209 Jy
! Component: 200  -  total flux cleaned = 0.000639414 Jy
! Total flux subtracted in 200 components = 0.000639414 Jy
! Clean residual min=-0.002677 max=0.003734 Jy/beam
! Clean residual mean=0.000008 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.130549 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.82816e-05 Jy
! Component: 100  -  total flux cleaned = -0.000111493 Jy
! Component: 150  -  total flux cleaned = -0.000149271 Jy
! Component: 200  -  total flux cleaned = -0.00020136 Jy
! Total flux subtracted in 200 components = -0.00020136 Jy
! Clean residual min=-0.002698 max=0.003586 Jy/beam
! Clean residual mean=0.000010 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.130348 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 27 components and 0.130348 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7832 mas, bmaj=2.087 mas, bpa=-11.6 degrees
! Estimated noise=690.924 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00055386 Jy
! Component: 100  -  total flux cleaned = -0.000491864 Jy
! Component: 150  -  total flux cleaned = -0.000529465 Jy
! Component: 200  -  total flux cleaned = -0.000559948 Jy
! Total flux subtracted in 200 components = -0.000559948 Jy
! Clean residual min=-0.002904 max=0.002806 Jy/beam
! Clean residual mean=0.000012 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.129788 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 30 components and 0.129788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142554Jy  sigma=0.001214
! Fit after  self-cal, rms=0.142538Jy  sigma=0.001214
wmodel J0526-2342_X_2008_07_09_pus_map.mod
! Writing 30 model components to file: J0526-2342_X_2008_07_09_pus_map.mod
wobs J0526-2342_X_2008_07_09_pus_uvs.fits
! Writing UV FITS file: J0526-2342_X_2008_07_09_pus_uvs.fits
wwins J0526-2342_X_2008_07_09_pus_map.win
! wwins: Wrote 1 windows to J0526-2342_X_2008_07_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000294415 Jy
! Component: 100  -  total flux cleaned = -0.000658958 Jy
! Component: 150  -  total flux cleaned = -0.00121798 Jy
! Component: 200  -  total flux cleaned = -0.0015035 Jy
! Component: 250  -  total flux cleaned = -0.00173728 Jy
! Component: 300  -  total flux cleaned = -0.0020377 Jy
! Component: 350  -  total flux cleaned = -0.00229016 Jy
! Component: 400  -  total flux cleaned = -0.00246276 Jy
! Component: 450  -  total flux cleaned = -0.00259557 Jy
! Component: 500  -  total flux cleaned = -0.00259507 Jy
! Component: 550  -  total flux cleaned = -0.00250252 Jy
! Component: 600  -  total flux cleaned = -0.00250251 Jy
! Component: 650  -  total flux cleaned = -0.00244435 Jy
! Component: 700  -  total flux cleaned = -0.00241559 Jy
! Component: 750  -  total flux cleaned = -0.00235934 Jy
! Component: 800  -  total flux cleaned = -0.00225022 Jy
! Component: 850  -  total flux cleaned = -0.00217034 Jy
! Component: 900  -  total flux cleaned = -0.00209265 Jy
! Component: 950  -  total flux cleaned = -0.00201668 Jy
! Component: 1000  -  total flux cleaned = -0.00196741 Jy
! Total flux subtracted in 1024 components = -0.00191897 Jy
! Clean residual min=-0.001650 max=0.001263 Jy/beam
! Clean residual mean=0.000010 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.127869 Jy
keep
! Adding 57 model components to the UV plane model.
! The established model now contains 87 components and 0.127869 Jy
wmap "J0526-2342_X_2008_07_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7832 x 2.087 at -11.6 degrees (North through East)
! Clean map  min=-0.0022867  max=0.098191 Jy/beam
! Writing clean map to FITS file: J0526-2342_X_2008_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0981907 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000492953 
device "J0526-2342_X_2008_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0526-2342_X_2008_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.50611 1.50611 3.01222 6.02444 12.0489 24.0978 48.1955 96.3911
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0014 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.098 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7832 x 2.087 at -11.6 degrees (North through East)
! Clean map  min=-0.0022867  max=0.098191 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0526-2342_X_2008_07_09_pus\_map.gif/vgif"
! Attempting to open device: 'J0526-2342_X_2008_07_09_pus_map.gif/vgif'
mapplot cln
quit
! Quitting program
! Log file J0526-2342_X_2008_07_09_pus_uvs.log closed on Sun Oct 10 20:16:37 2010