! Started logfile: J0339-0146_S_2008_07_09_pus_uvs.log on Wed Oct 13 13:12:54 2010
obs J0339-0146_S_2008_07_09_pus_uva.fits
! Reading UV FITS file: J0339-0146_S_2008_07_09_pus_uva.fits
! AN table 1: 36 integrations on 105 of 105 possible baselines.
! Apparent sampling: 0.0208995 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0339-0146
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1054 lines of history.
! 
! Reading 316 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 502 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 502 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 502 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 502 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.252281Jy  sigma=0.003881
! Fit after  self-cal, rms=1.185725Jy  sigma=0.004340
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.573 mas, bmaj=14.49 mas, bpa=27.77 degrees
! Estimated noise=15949.3 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.59687 Jy
! Component: 100  -  total flux cleaned = 1.90842 Jy
! Total flux subtracted in 100 components = 1.90842 Jy
! Clean residual min=-0.120678 max=0.120448 Jy/beam
! Clean residual mean=0.001299 rms=0.049400 Jy/beam
! Combined flux in latest and established models = 1.90842 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 1.90842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.616184Jy  sigma=0.001945
! Fit after  self-cal, rms=0.616328Jy  sigma=0.001945
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.529 mas, bmaj=14.1 mas, bpa=28.07 degrees
! Estimated noise=14427.4 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106844 Jy
! Component: 100  -  total flux cleaned = -0.00748577 Jy
! Component: 150  -  total flux cleaned = -0.0152103 Jy
! Component: 200  -  total flux cleaned = -0.0234124 Jy
! Total flux subtracted in 200 components = -0.0234124 Jy
! Clean residual min=-0.025348 max=0.024943 Jy/beam
! Clean residual mean=0.000067 rms=0.010169 Jy/beam
! Combined flux in latest and established models = 1.88501 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 41 components and 1.88501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.592917Jy  sigma=0.001814
! Fit after  self-cal, rms=0.593661Jy  sigma=0.001813
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KK        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    NY        0.99     ON        0.99     PT        1.00*    
!   SC        1.00*    WZ        0.99     ZC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KK        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    NY        0.99     ON        0.98     PT        1.00*    
!   SC        1.00*    WZ        0.99     ZC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KK        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    NY        1.02     ON        0.99     PT        1.00*    
!   SC        1.00*    WZ        1.03     ZC        1.13     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HH        1.00*    HN        1.00*    
!   KK        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    NY        0.99     ON        1.04     PT        1.00*    
!   SC        1.00*    WZ        1.01     ZC        0.86     
! 
! 
! Fit before self-cal, rms=0.593661Jy  sigma=0.001813
! Fit after  self-cal, rms=0.596459Jy  sigma=0.001725
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.59 mas, bmaj=14.3 mas, bpa=27.83 degrees
! Estimated noise=15456.2 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00367379 Jy
! Component: 100  -  total flux cleaned = -0.00561824 Jy
! Component: 150  -  total flux cleaned = -0.00910757 Jy
! Component: 200  -  total flux cleaned = -0.0114181 Jy
! Total flux subtracted in 200 components = -0.0114181 Jy
! Clean residual min=-0.009959 max=0.009957 Jy/beam
! Clean residual mean=0.000078 rms=0.003963 Jy/beam
! Combined flux in latest and established models = 1.87359 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 84 components and 1.87359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.595056Jy  sigma=0.001721
! Fit after  self-cal, rms=0.594793Jy  sigma=0.001721
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.594793Jy  sigma=0.001721
! Fit after  self-cal, rms=0.595662Jy  sigma=0.001720
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.588 mas, bmaj=14.3 mas, bpa=27.82 degrees
! Estimated noise=15429.6 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00897427 Jy
! Component: 100  -  total flux cleaned = -0.0134041 Jy
! Component: 150  -  total flux cleaned = -0.0167602 Jy
! Component: 200  -  total flux cleaned = -0.0210582 Jy
! Total flux subtracted in 200 components = -0.0210582 Jy
! Clean residual min=-0.005597 max=0.005548 Jy/beam
! Clean residual mean=-0.000029 rms=0.002077 Jy/beam
! Combined flux in latest and established models = 1.85253 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 121 components and 1.85253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.595236Jy  sigma=0.001719
! Fit after  self-cal, rms=0.595293Jy  sigma=0.001719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00533704 Jy
! Component: 100  -  total flux cleaned = -0.0089411 Jy
! Component: 150  -  total flux cleaned = -0.0107855 Jy
! Component: 200  -  total flux cleaned = -0.0115146 Jy
! Total flux subtracted in 200 components = -0.0115146 Jy
! Clean residual min=-0.004179 max=0.004159 Jy/beam
! Clean residual mean=-0.000010 rms=0.001437 Jy/beam
! Combined flux in latest and established models = 1.84102 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 144 components and 1.84102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.595141Jy  sigma=0.001719
! Fit after  self-cal, rms=0.595098Jy  sigma=0.001719
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.595098Jy  sigma=0.001719
! Fit after  self-cal, rms=0.596363Jy  sigma=0.001719
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.589 mas, bmaj=14.3 mas, bpa=27.8 degrees
! Estimated noise=15434.7 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00167792 Jy
! Component: 100  -  total flux cleaned = -0.00320191 Jy
! Component: 150  -  total flux cleaned = -0.00468299 Jy
! Component: 200  -  total flux cleaned = -0.00643731 Jy
! Total flux subtracted in 200 components = -0.00643731 Jy
! Clean residual min=-0.004303 max=0.004215 Jy/beam
! Clean residual mean=-0.000050 rms=0.001605 Jy/beam
! Combined flux in latest and established models = 1.83458 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 171 components and 1.83458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.596151Jy  sigma=0.001718
! Fit after  self-cal, rms=0.596159Jy  sigma=0.001718
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00195484 Jy
! Component: 100  -  total flux cleaned = -0.0025574 Jy
! Component: 150  -  total flux cleaned = -0.00375815 Jy
! Component: 200  -  total flux cleaned = -0.00559565 Jy
! Total flux subtracted in 200 components = -0.00559565 Jy
! Clean residual min=-0.003514 max=0.003514 Jy/beam
! Clean residual mean=-0.000016 rms=0.001340 Jy/beam
! Combined flux in latest and established models = 1.82898 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 186 components and 1.82898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.596024Jy  sigma=0.001718
! Fit after  self-cal, rms=0.595991Jy  sigma=0.001718
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.595991Jy  sigma=0.001718
! Fit after  self-cal, rms=0.597023Jy  sigma=0.001718
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.876 mas, bmaj=13.17 mas, bpa=28.69 degrees
! Estimated noise=19869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000645164 Jy
! Component: 100  -  total flux cleaned = 0.00271607 Jy
! Component: 150  -  total flux cleaned = 0.00342331 Jy
! Component: 200  -  total flux cleaned = 0.00342754 Jy
! Total flux subtracted in 200 components = 0.00342754 Jy
! Clean residual min=-0.008118 max=0.008280 Jy/beam
! Clean residual mean=-0.000183 rms=0.002201 Jy/beam
! Combined flux in latest and established models = 1.83241 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 204 components and 1.83241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.596866Jy  sigma=0.001717
! Fit after  self-cal, rms=0.596853Jy  sigma=0.001717
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00283628 Jy
! Component: 100  -  total flux cleaned = -0.00261199 Jy
! Component: 150  -  total flux cleaned = -0.00233396 Jy
! Component: 200  -  total flux cleaned = -0.00230235 Jy
! Total flux subtracted in 200 components = -0.00230235 Jy
! Clean residual min=-0.005868 max=0.005984 Jy/beam
! Clean residual mean=-0.000024 rms=0.001627 Jy/beam
! Combined flux in latest and established models = 1.83011 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 224 components and 1.83011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.596740Jy  sigma=0.001717
! Fit after  self-cal, rms=0.596750Jy  sigma=0.001717
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.589 mas, bmaj=14.3 mas, bpa=27.8 degrees
! Estimated noise=15438.8 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.589 x 14.3 at 27.8 degrees (North through East)
! Clean map  min=-0.066088  max=1.9422 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.596750Jy  sigma=0.001717
! Fit after  self-cal, rms=0.474024Jy  sigma=0.000796
! Inverting map and beam 
! Estimated beam: bmin=4.591 mas, bmaj=14.29 mas, bpa=27.8 degrees
! Estimated noise=15460 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000691767 Jy
! Component: 100  -  total flux cleaned = -0.00139561 Jy
! Component: 150  -  total flux cleaned = -0.00156067 Jy
! Component: 200  -  total flux cleaned = -0.00120952 Jy
! Total flux subtracted in 200 components = -0.00120952 Jy
! Clean residual min=-0.002986 max=0.002987 Jy/beam
! Clean residual mean=-0.000010 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 1.8289 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 255 components and 1.8289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.473713Jy  sigma=0.000796
! Fit after  self-cal, rms=0.473955Jy  sigma=0.000796
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186089 Jy
! Component: 100  -  total flux cleaned = 0.00214422 Jy
! Component: 150  -  total flux cleaned = 0.00214359 Jy
! Component: 200  -  total flux cleaned = 0.00159323 Jy
! Total flux subtracted in 200 components = 0.00159323 Jy
! Clean residual min=-0.002278 max=0.002330 Jy/beam
! Clean residual mean=0.000017 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 1.83049 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 291 components and 1.83049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.473785Jy  sigma=0.000796
! Fit after  self-cal, rms=0.473907Jy  sigma=0.000796
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.473907Jy  sigma=0.000796
! Fit after  self-cal, rms=0.476453Jy  sigma=0.000795
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.562 mas, bmaj=14.42 mas, bpa=27.6 degrees
! Estimated noise=16403.4 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.58827 Jy
! Component: 100  -  total flux cleaned = 1.90018 Jy
! Component: 150  -  total flux cleaned = 1.90721 Jy
! Component: 200  -  total flux cleaned = 1.87267 Jy
! Total flux subtracted in 200 components = 1.87267 Jy
! Clean residual min=-0.039703 max=0.039583 Jy/beam
! Clean residual mean=0.000474 rms=0.015557 Jy/beam
! Combined flux in latest and established models = 1.87267 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 1.87267 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.591 mas, bmaj=14.29 mas, bpa=27.8 degrees
! Estimated noise=15467.2 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00489097 Jy
! Component: 100  -  total flux cleaned = -0.00781994 Jy
! Component: 150  -  total flux cleaned = -0.0202841 Jy
! Component: 200  -  total flux cleaned = -0.0318217 Jy
! Total flux subtracted in 200 components = -0.0318216 Jy
! Clean residual min=-0.014266 max=0.014096 Jy/beam
! Clean residual mean=-0.000088 rms=0.005054 Jy/beam
! Combined flux in latest and established models = 1.84085 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 54 components and 1.84085 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.881 mas, bmaj=13.17 mas, bpa=28.69 degrees
! Estimated noise=19891.7 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00813588 Jy
! Component: 100  -  total flux cleaned = -0.0110419 Jy
! Component: 150  -  total flux cleaned = -0.0122292 Jy
! Component: 200  -  total flux cleaned = -0.0118501 Jy
! Total flux subtracted in 200 components = -0.0118501 Jy
! Clean residual min=-0.007415 max=0.007422 Jy/beam
! Clean residual mean=0.000077 rms=0.002434 Jy/beam
! Combined flux in latest and established models = 1.829 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000965844 Jy
! Component: 100  -  total flux cleaned = -0.000356607 Jy
! Component: 150  -  total flux cleaned = -0.00113313 Jy
! Component: 200  -  total flux cleaned = -0.00216654 Jy
! Total flux subtracted in 200 components = -0.00216654 Jy
! Clean residual min=-0.019943 max=0.020273 Jy/beam
! Clean residual mean=0.000146 rms=0.004875 Jy/beam
! Combined flux in latest and established models = 1.82683 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 95 components and 1.82683 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.591 mas, bmaj=14.29 mas, bpa=27.8 degrees
! Estimated noise=15467.2 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00936788 Jy
! Component: 100  -  total flux cleaned = -0.0156885 Jy
! Component: 150  -  total flux cleaned = -0.0180171 Jy
! Component: 200  -  total flux cleaned = -0.017525 Jy
! Total flux subtracted in 200 components = -0.017525 Jy
! Clean residual min=-0.004126 max=0.003990 Jy/beam
! Clean residual mean=-0.000002 rms=0.001365 Jy/beam
! Combined flux in latest and established models = 1.8093 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 116 components and 1.8093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.477235Jy  sigma=0.000800
! Fit after  self-cal, rms=0.477378Jy  sigma=0.000800
wmodel J0339-0146_S_2008_07_09_pus_map.mod
! Writing 116 model components to file: J0339-0146_S_2008_07_09_pus_map.mod
wobs J0339-0146_S_2008_07_09_pus_uvs.fits
! Writing UV FITS file: J0339-0146_S_2008_07_09_pus_uvs.fits
wwins J0339-0146_S_2008_07_09_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
wmap "J0339-0146_S_2008_07_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.591 x 14.29 at 27.8 degrees (North through East)
! Clean map  min=-0.054241  max=1.889 Jy/beam
! Writing clean map to FITS file: J0339-0146_S_2008_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.889 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00133127 
device "J0339-0146_S_2008_07_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0339-0146_S_2008_07_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.211425 0.211425 0.422849 0.845699 1.6914 3.38279 6.76559 13.5312 27.0624 54.1247
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0039 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.888 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.591 x 14.29 at 27.8 degrees (North through East)
! Clean map  min=-0.054241  max=1.889 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0339-0146_S_2008_07_09_pus\_map.gif/vgif"
! Attempting to open device: 'J0339-0146_S_2008_07_09_pus_map.gif/vgif'
mapplot cln
quit
! Quitting program
! Log file J0339-0146_S_2008_07_09_pus_uvs.log closed on Wed Oct 13 13:12:57 2010