! Started logfile: J0319-1613_S_2008_07_09_pus_uvs.log on Wed Oct 13 14:52:42 2010 obs J0319-1613_S_2008_07_09_pus_uva.fits ! Reading UV FITS file: J0319-1613_S_2008_07_09_pus_uva.fits ! AN table 1: 185 integrations on 105 of 105 possible baselines. ! Apparent sampling: 0.306976 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0319-1613 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1058 lines of history. ! ! Reading 23852 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1205 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883237Jy sigma=0.007254 ! Fit after self-cal, rms=0.850578Jy sigma=0.007001 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=6.304 mas, bpa=-2.962 degrees ! Estimated noise=1038.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126896 Jy ! Component: 100 - total flux cleaned = 0.155299 Jy ! Total flux subtracted in 100 components = 0.155299 Jy ! Clean residual min=-0.008060 max=0.012057 Jy/beam ! Clean residual mean=0.000125 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 0.155299 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.155299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156197Jy sigma=0.001205 ! Fit after self-cal, rms=0.156190Jy sigma=0.001205 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=7.374 mas, bpa=-3.765 degrees ! Estimated noise=563.207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146413 Jy ! Component: 100 - total flux cleaned = 0.022297 Jy ! Component: 150 - total flux cleaned = 0.0259803 Jy ! Component: 200 - total flux cleaned = 0.0273411 Jy ! Total flux subtracted in 200 components = 0.0273411 Jy ! Clean residual min=-0.004360 max=0.005191 Jy/beam ! Clean residual mean=0.000020 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.18264 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.18264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154961Jy sigma=0.001192 ! Fit after self-cal, rms=0.154903Jy sigma=0.001191 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HH 1.00* HN 1.05 ! KK 1.00* KP 0.99 LA 0.98 MK 0.99 ! NL 1.04 NY 1.00* ON 1.00* PT 0.98 ! SC 0.98 WZ 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HH 1.00* HN 1.02 ! KK 1.00* KP 1.03 LA 0.98 MK 1.02 ! NL 0.96 NY 1.00* ON 1.00* PT 0.98 ! SC 1.01 WZ 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HH 1.00* HN 1.04 ! KK 1.00* KP 1.04 LA 1.00 MK 1.00 ! NL 1.01 NY 1.00* ON 1.00* PT 1.04 ! SC 1.02 WZ 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.99 HH 1.00* HN 1.01 ! KK 1.00* KP 1.01 LA 1.03 MK 1.03 ! NL 0.98 NY 1.00* ON 1.00* PT 0.97 ! SC 1.03 WZ 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.154903Jy sigma=0.001191 ! Fit after self-cal, rms=0.153658Jy sigma=0.001186 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=7.361 mas, bpa=-3.576 degrees ! Estimated noise=556.319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267234 Jy ! Component: 100 - total flux cleaned = 0.00335153 Jy ! Component: 150 - total flux cleaned = 0.00375185 Jy ! Component: 200 - total flux cleaned = 0.00404325 Jy ! Total flux subtracted in 200 components = 0.00404325 Jy ! Clean residual min=-0.003644 max=0.003206 Jy/beam ! Clean residual mean=-0.000035 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.186683 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.186683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153571Jy sigma=0.001186 ! Fit after self-cal, rms=0.153692Jy sigma=0.001185 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153692Jy sigma=0.001185 ! Fit after self-cal, rms=0.155404Jy sigma=0.001178 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=7.355 mas, bpa=-3.578 degrees ! Estimated noise=557.429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140404 Jy ! Component: 100 - total flux cleaned = 0.00157941 Jy ! Component: 150 - total flux cleaned = 0.0017272 Jy ! Component: 200 - total flux cleaned = 0.00179115 Jy ! Total flux subtracted in 200 components = 0.00179115 Jy ! Clean residual min=-0.003091 max=0.002150 Jy/beam ! Clean residual mean=-0.000004 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.188474 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.188474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155377Jy sigma=0.001177 ! Fit after self-cal, rms=0.155558Jy sigma=0.001177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184531 Jy ! Component: 100 - total flux cleaned = 0.000185344 Jy ! Component: 150 - total flux cleaned = 0.000212207 Jy ! Component: 200 - total flux cleaned = 0.000212541 Jy ! Total flux subtracted in 200 components = 0.000212541 Jy ! Clean residual min=-0.003055 max=0.002080 Jy/beam ! Clean residual mean=-0.000003 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.188687 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.188687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155547Jy sigma=0.001177 ! Fit after self-cal, rms=0.155542Jy sigma=0.001177 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155542Jy sigma=0.001177 ! Fit after self-cal, rms=0.155566Jy sigma=0.001177 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=7.353 mas, bpa=-3.562 degrees ! Estimated noise=557.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000865926 Jy ! Component: 100 - total flux cleaned = 0.00103793 Jy ! Component: 150 - total flux cleaned = 0.00103892 Jy ! Component: 200 - total flux cleaned = 0.00103881 Jy ! Total flux subtracted in 200 components = 0.00103881 Jy ! Clean residual min=-0.003095 max=0.002021 Jy/beam ! Clean residual mean=-0.000004 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.189726 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 98 components and 0.189726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155556Jy sigma=0.001177 ! Fit after self-cal, rms=0.155575Jy sigma=0.001177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113274 Jy ! Component: 100 - total flux cleaned = 0.000113651 Jy ! Component: 150 - total flux cleaned = 7.50489e-05 Jy ! Component: 200 - total flux cleaned = 7.47923e-05 Jy ! Total flux subtracted in 200 components = 7.47923e-05 Jy ! Clean residual min=-0.003117 max=0.001995 Jy/beam ! Clean residual mean=-0.000003 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.1898 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 106 components and 0.1898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155570Jy sigma=0.001177 ! Fit after self-cal, rms=0.155569Jy sigma=0.001177 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155569Jy sigma=0.001177 ! Fit after self-cal, rms=0.155545Jy sigma=0.001177 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.784 mas, bmaj=13.79 mas, bpa=4.931 degrees ! Estimated noise=696.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000730407 Jy ! Component: 100 - total flux cleaned = 0.000915658 Jy ! Component: 150 - total flux cleaned = 0.00106901 Jy ! Component: 200 - total flux cleaned = 0.00113772 Jy ! Total flux subtracted in 200 components = 0.00113772 Jy ! Clean residual min=-0.002537 max=0.002136 Jy/beam ! Clean residual mean=-0.000003 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.190938 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 112 components and 0.190938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155549Jy sigma=0.001177 ! Fit after self-cal, rms=0.155551Jy sigma=0.001177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144982 Jy ! Component: 100 - total flux cleaned = 0.000162461 Jy ! Component: 150 - total flux cleaned = 0.000177221 Jy ! Component: 200 - total flux cleaned = 0.000188812 Jy ! Total flux subtracted in 200 components = 0.000188812 Jy ! Clean residual min=-0.002575 max=0.002120 Jy/beam ! Clean residual mean=-0.000004 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.191127 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 116 components and 0.191127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155553Jy sigma=0.001177 ! Fit after self-cal, rms=0.155556Jy sigma=0.001177 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=7.351 mas, bpa=-3.527 degrees ! Estimated noise=557.848 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.102 x 7.351 at -3.527 degrees (North through East) ! Clean map min=-0.0029978 max=0.15976 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=6.314 mas, bpa=-2.749 degrees ! Estimated noise=1021.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124437 Jy ! Component: 100 - total flux cleaned = 0.153048 Jy ! Component: 150 - total flux cleaned = 0.165425 Jy ! Component: 200 - total flux cleaned = 0.173346 Jy ! Total flux subtracted in 200 components = 0.173346 Jy ! Clean residual min=-0.005256 max=0.005678 Jy/beam ! Clean residual mean=0.000043 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.173346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.173346 Jy ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=7.351 mas, bpa=-3.527 degrees ! Estimated noise=557.848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737428 Jy ! Component: 100 - total flux cleaned = 0.0114645 Jy ! Component: 150 - total flux cleaned = 0.0140452 Jy ! Component: 200 - total flux cleaned = 0.0157268 Jy ! Total flux subtracted in 200 components = 0.0157268 Jy ! Clean residual min=-0.003230 max=0.002291 Jy/beam ! Clean residual mean=0.000008 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.189072 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 56 components and 0.189072 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.784 mas, bmaj=13.79 mas, bpa=4.931 degrees ! Estimated noise=696.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118 Jy ! Component: 100 - total flux cleaned = 0.00152026 Jy ! Component: 150 - total flux cleaned = 0.0017624 Jy ! Component: 200 - total flux cleaned = 0.00193699 Jy ! Total flux subtracted in 200 components = 0.00193699 Jy ! Clean residual min=-0.002677 max=0.002110 Jy/beam ! Clean residual mean=0.000002 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.191009 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.73224e-05 Jy ! Component: 100 - total flux cleaned = 0.000111193 Jy ! Component: 150 - total flux cleaned = 0.00015868 Jy ! Component: 200 - total flux cleaned = 0.00017309 Jy ! Total flux subtracted in 200 components = 0.00017309 Jy ! Clean residual min=-0.002626 max=0.002145 Jy/beam ! Clean residual mean=-0.000000 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.191183 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 80 components and 0.191182 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=7.351 mas, bpa=-3.527 degrees ! Estimated noise=557.848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140177 Jy ! Component: 100 - total flux cleaned = -0.000178039 Jy ! Component: 150 - total flux cleaned = -0.000177615 Jy ! Component: 200 - total flux cleaned = -0.000177642 Jy ! Total flux subtracted in 200 components = -0.000177642 Jy ! Clean residual min=-0.003207 max=0.002042 Jy/beam ! Clean residual mean=-0.000002 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.191005 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.191005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155554Jy sigma=0.001177 ! Fit after self-cal, rms=0.155554Jy sigma=0.001177 wmodel J0319-1613_S_2008_07_09_pus_map.mod ! Writing 96 model components to file: J0319-1613_S_2008_07_09_pus_map.mod wobs J0319-1613_S_2008_07_09_pus_uvs.fits ! Writing UV FITS file: J0319-1613_S_2008_07_09_pus_uvs.fits wwins J0319-1613_S_2008_07_09_pus_map.win ! wwins: Wrote 2 windows to J0319-1613_S_2008_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129092 Jy ! Component: 100 - total flux cleaned = -0.00199918 Jy ! Component: 150 - total flux cleaned = -0.00222562 Jy ! Component: 200 - total flux cleaned = -0.00236914 Jy ! Component: 250 - total flux cleaned = -0.00247221 Jy ! Component: 300 - total flux cleaned = -0.0026036 Jy ! Component: 350 - total flux cleaned = -0.00269795 Jy ! Component: 400 - total flux cleaned = -0.00275807 Jy ! Component: 450 - total flux cleaned = -0.0027577 Jy ! Component: 500 - total flux cleaned = -0.00275743 Jy ! Component: 550 - total flux cleaned = -0.00273019 Jy ! Component: 600 - total flux cleaned = -0.0027034 Jy ! Component: 650 - total flux cleaned = -0.0026241 Jy ! Component: 700 - total flux cleaned = -0.00246927 Jy ! Component: 750 - total flux cleaned = -0.00229242 Jy ! Component: 800 - total flux cleaned = -0.00206988 Jy ! Component: 850 - total flux cleaned = -0.00190094 Jy ! Component: 900 - total flux cleaned = -0.00178224 Jy ! Component: 950 - total flux cleaned = -0.00166565 Jy ! Component: 1000 - total flux cleaned = -0.00157406 Jy ! Component: 1050 - total flux cleaned = -0.00146139 Jy ! Component: 1100 - total flux cleaned = -0.00139488 Jy ! Component: 1150 - total flux cleaned = -0.00132888 Jy ! Component: 1200 - total flux cleaned = -0.00124278 Jy ! Component: 1250 - total flux cleaned = -0.00120058 Jy ! Component: 1300 - total flux cleaned = -0.00111715 Jy ! Component: 1350 - total flux cleaned = -0.00113794 Jy ! Component: 1400 - total flux cleaned = -0.00107687 Jy ! Component: 1450 - total flux cleaned = -0.00109701 Jy ! Component: 1500 - total flux cleaned = -0.00109711 Jy ! Component: 1550 - total flux cleaned = -0.00109722 Jy ! Component: 1600 - total flux cleaned = -0.00111665 Jy ! Component: 1650 - total flux cleaned = -0.00111675 Jy ! Component: 1700 - total flux cleaned = -0.00111677 Jy ! Component: 1750 - total flux cleaned = -0.00115433 Jy ! Component: 1800 - total flux cleaned = -0.00113576 Jy ! Component: 1850 - total flux cleaned = -0.00120918 Jy ! Component: 1900 - total flux cleaned = -0.00122723 Jy ! Component: 1950 - total flux cleaned = -0.00120942 Jy ! Component: 2000 - total flux cleaned = -0.0012451 Jy ! Total flux subtracted in 2048 components = -0.00129811 Jy ! Clean residual min=-0.001096 max=0.001106 Jy/beam ! Clean residual mean=0.000005 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.189707 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 220 components and 0.189707 Jy wmap "J0319-1613_S_2008_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.102 x 7.351 at -3.527 degrees (North through East) ! Clean map min=-0.0029445 max=0.15877 Jy/beam ! Writing clean map to FITS file: J0319-1613_S_2008_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.158766 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000347608 device "J0319-1613_S_2008_07_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0319-1613_S_2008_07_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.656831 0.656831 1.31366 2.62732 5.25464 10.5093 21.0186 42.0372 84.0743 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.158 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.102 x 7.351 at -3.527 degrees (North through East) ! Clean map min=-0.0029445 max=0.15877 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0319-1613_S_2008_07_09_pus\_map.gif/vgif" ! Attempting to open device: 'J0319-1613_S_2008_07_09_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0319-1613_S_2008_07_09_pus_uvs.log closed on Wed Oct 13 14:52:47 2010