! Started logfile: J1658+0515_X_2008_04_02_pus_uvs.log on Sun Feb 21 21:13:45 2010 obs J1658+0515_X_2008_04_02_pus_uva.fits ! Reading UV FITS file: J1658+0515_X_2008_04_02_pus_uva.fits ! AN table 1: 423 integrations on 120 of 120 possible baselines. ! AN table 2: 159 integrations on 120 of 120 possible baselines. ! AN table 3: 95 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.0604136 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1658+0515 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2284 lines of history. ! ! Reading 19632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5446 telescope corrections were flagged in sub-array 1. ! A total of 1900 telescope corrections were flagged in sub-array 2. ! A total of 1291 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 5516 telescope corrections were flagged in sub-array 1. ! A total of 1935 telescope corrections were flagged in sub-array 2. ! A total of 1291 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 5458 telescope corrections were flagged in sub-array 1. ! A total of 1900 telescope corrections were flagged in sub-array 2. ! A total of 1291 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 5446 telescope corrections were flagged in sub-array 1. ! A total of 1900 telescope corrections were flagged in sub-array 2. ! A total of 1291 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.793014Jy sigma=0.005165 ! Fit after self-cal, rms=0.528418Jy sigma=0.002422 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.952 mas, bmaj=0.971 mas, bpa=-60.9 degrees ! Estimated noise=1255.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.503987 Jy ! Component: 100 - total flux cleaned = 0.633028 Jy ! Total flux subtracted in 100 components = 0.633028 Jy ! Clean residual min=-0.018325 max=0.053272 Jy/beam ! Clean residual mean=-0.000246 rms=0.004783 Jy/beam ! Combined flux in latest and established models = 0.633028 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.633028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372050Jy sigma=0.001374 ! Fit after self-cal, rms=0.372318Jy sigma=0.001374 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0574931 Jy ! Component: 100 - total flux cleaned = 0.086029 Jy ! Total flux subtracted in 100 components = 0.086029 Jy ! Clean residual min=-0.013717 max=0.020920 Jy/beam ! Clean residual mean=-0.000160 rms=0.003384 Jy/beam ! Combined flux in latest and established models = 0.719057 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.719057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364440Jy sigma=0.001258 ! Fit after self-cal, rms=0.364353Jy sigma=0.001258 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (1.4, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197117 Jy ! Component: 100 - total flux cleaned = 0.0315066 Jy ! Total flux subtracted in 100 components = 0.0315066 Jy ! Clean residual min=-0.013562 max=0.019496 Jy/beam ! Clean residual mean=-0.000129 rms=0.003185 Jy/beam ! Combined flux in latest and established models = 0.750564 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 0.750564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363312Jy sigma=0.001245 ! Fit after self-cal, rms=0.363220Jy sigma=0.001244 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (18.8, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187448 Jy ! Component: 100 - total flux cleaned = 0.029876 Jy ! Total flux subtracted in 100 components = 0.029876 Jy ! Clean residual min=-0.013241 max=0.014210 Jy/beam ! Clean residual mean=-0.000107 rms=0.002956 Jy/beam ! Combined flux in latest and established models = 0.78044 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.78044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362570Jy sigma=0.001230 ! Fit after self-cal, rms=0.362348Jy sigma=0.001229 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8564 mas, bmaj=1.047 mas, bpa=-85.49 degrees ! Estimated noise=955.378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118096 Jy ! Component: 100 - total flux cleaned = 0.0150202 Jy ! Component: 150 - total flux cleaned = 0.0180986 Jy ! Component: 200 - total flux cleaned = 0.0208041 Jy ! Total flux subtracted in 200 components = 0.0208041 Jy ! Clean residual min=-0.012934 max=0.015594 Jy/beam ! Clean residual mean=-0.000105 rms=0.003153 Jy/beam ! Combined flux in latest and established models = 0.801244 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.801244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361564Jy sigma=0.001223 ! Fit after self-cal, rms=0.361407Jy sigma=0.001222 ! Inverting map ! Your choice of large map pixels excluded 7.65% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HH 0.96 HN 1.00* ! KK 0.94 KP 1.00 LA 1.00 MK 0.99 ! NL 1.13 NY 0.97 ON 1.00 OV 1.03 ! PT 1.01 SC 1.00* WZ 0.99 ZC 1.05 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.05 HH 0.95 HN 1.06 ! KK 1.00* KP 1.02 LA 1.08 MK 1.00* ! NL 1.02 NY 1.06 ON 1.01 OV 1.01 ! PT 1.08 SC 0.99 WZ 0.97 ZC 1.21 ! ! A total of 51 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.99 HH 1.00* HN 0.94 ! KK 1.00* KP 1.00 LA 0.96 MK 1.00* ! NL 0.95 NY 1.00* ON 1.00* OV 0.96 ! PT 0.94 SC 0.98 WZ 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HH 0.94 HN 1.00* ! KK 0.96 KP 0.96 LA 0.97 MK 0.94 ! NL 1.07 NY 0.94 ON 1.01 OV 1.00 ! PT 1.00 SC 1.00* WZ 1.04 ZC 4.50 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.02 HH 0.92 HN 1.06 ! KK 1.00* KP 0.99 LA 1.06 MK 1.00* ! NL 0.97 NY 1.01 ON 1.05 OV 1.03 ! PT 1.10 SC 0.97 WZ 1.05 ZC 1.00* ! ! A total of 51 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 0.99 HH 1.00* HN 0.96 ! KK 1.00* KP 0.96 LA 0.94 MK 1.00* ! NL 0.93 NY 1.00* ON 1.00* OV 0.94 ! PT 0.92 SC 0.99 WZ 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HH 0.94 HN 1.00* ! KK 1.03 KP 0.97 LA 1.05 MK 0.98 ! NL 1.10 NY 1.19 ON 0.99 OV 1.04 ! PT 1.02 SC 1.00* WZ 0.97 ZC 1.07 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.05 HH 0.92 HN 1.04 ! KK 1.00* KP 1.02 LA 1.10 MK 1.00* ! NL 0.99 NY 0.99 ON 0.99 OV 1.03 ! PT 1.09 SC 1.02 WZ 0.99 ZC 1.29 ! ! A total of 51 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HH 1.00* HN 0.95 ! KK 1.00* KP 1.01 LA 0.99 MK 1.00* ! NL 0.93 NY 1.00* ON 1.00* OV 0.98 ! PT 0.94 SC 1.03 WZ 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HH 0.94 HN 1.00* ! KK 1.10 KP 0.97 LA 1.02 MK 1.01 ! NL 1.14 NY 0.96 ON 0.99 OV 1.03 ! PT 1.00 SC 1.00* WZ 0.99 ZC 1.06 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.05 HH 1.02 HN 1.04 ! KK 1.00* KP 1.01 LA 1.08 MK 1.00* ! NL 1.00 NY 1.05 ON 1.00 OV 1.06 ! PT 1.06 SC 1.01 WZ 1.02 ZC 1.18 ! ! A total of 51 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 HH 1.00* HN 0.92 ! KK 1.00* KP 1.01 LA 0.98 MK 1.00* ! NL 0.94 NY 1.00* ON 1.00* OV 0.96 ! PT 0.93 SC 1.05 WZ 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.361407Jy sigma=0.001222 ! Fit after self-cal, rms=0.356959Jy sigma=0.001178 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8536 mas, bmaj=1.058 mas, bpa=-86 degrees ! Estimated noise=975.724 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109 Jy ! Component: 100 - total flux cleaned = 0.0173004 Jy ! Component: 150 - total flux cleaned = 0.019724 Jy ! Component: 200 - total flux cleaned = 0.0209399 Jy ! Total flux subtracted in 200 components = 0.0209399 Jy ! Clean residual min=-0.008000 max=0.008950 Jy/beam ! Clean residual mean=-0.000052 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.822184 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.822184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356272Jy sigma=0.001175 ! Fit after self-cal, rms=0.356307Jy sigma=0.001174 ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356307Jy sigma=0.001174 ! Fit after self-cal, rms=0.364881Jy sigma=0.001167 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8503 mas, bmaj=1.064 mas, bpa=-85.7 degrees ! Estimated noise=982.635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456677 Jy ! Component: 100 - total flux cleaned = 0.0066937 Jy ! Component: 150 - total flux cleaned = 0.00803367 Jy ! Component: 200 - total flux cleaned = 0.00921498 Jy ! Total flux subtracted in 200 components = 0.00921498 Jy ! Clean residual min=-0.006811 max=0.008645 Jy/beam ! Clean residual mean=-0.000048 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.831399 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.831399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364527Jy sigma=0.001166 ! Fit after self-cal, rms=0.364525Jy sigma=0.001165 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.2, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722483 Jy ! Component: 100 - total flux cleaned = 0.00962455 Jy ! Component: 150 - total flux cleaned = 0.0101003 Jy ! Component: 200 - total flux cleaned = 0.0109029 Jy ! Total flux subtracted in 200 components = 0.0109029 Jy ! Clean residual min=-0.006371 max=0.007145 Jy/beam ! Clean residual mean=-0.000049 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.842302 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.842302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364239Jy sigma=0.001163 ! Fit after self-cal, rms=0.364130Jy sigma=0.001163 ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (-15.6, 17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581 Jy ! Component: 100 - total flux cleaned = 0.00821212 Jy ! Component: 150 - total flux cleaned = 0.0101823 Jy ! Component: 200 - total flux cleaned = 0.011747 Jy ! Total flux subtracted in 200 components = 0.011747 Jy ! Clean residual min=-0.005962 max=0.006123 Jy/beam ! Clean residual mean=-0.000052 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.854049 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 89 components and 0.854049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363894Jy sigma=0.001161 ! Fit after self-cal, rms=0.363828Jy sigma=0.001161 ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363828Jy sigma=0.001161 ! Fit after self-cal, rms=0.364351Jy sigma=0.001153 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8466 mas, bmaj=1.063 mas, bpa=-85.49 degrees ! Estimated noise=982.018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000948247 Jy ! Component: 100 - total flux cleaned = 0.000688386 Jy ! Component: 150 - total flux cleaned = 0.000696335 Jy ! Component: 200 - total flux cleaned = 0.000703324 Jy ! Total flux subtracted in 200 components = 0.000703324 Jy ! Clean residual min=-0.004861 max=0.004989 Jy/beam ! Clean residual mean=-0.000027 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.854752 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.854752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364191Jy sigma=0.001152 ! Fit after self-cal, rms=0.364219Jy sigma=0.001152 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371621 Jy ! Component: 100 - total flux cleaned = 0.00491811 Jy ! Component: 150 - total flux cleaned = 0.00462001 Jy ! Component: 200 - total flux cleaned = 0.00443416 Jy ! Total flux subtracted in 200 components = 0.00443416 Jy ! Clean residual min=-0.005045 max=0.004629 Jy/beam ! Clean residual mean=-0.000025 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.859186 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 118 components and 0.859186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364079Jy sigma=0.001151 ! Fit after self-cal, rms=0.364062Jy sigma=0.001151 ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364062Jy sigma=0.001151 ! Fit after self-cal, rms=0.363723Jy sigma=0.001151 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=2.638 mas, bmaj=3.059 mas, bpa=-13.74 degrees ! Estimated noise=1114.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233751 Jy ! Component: 100 - total flux cleaned = 0.00313835 Jy ! Component: 150 - total flux cleaned = 0.0034877 Jy ! Component: 200 - total flux cleaned = 0.00388329 Jy ! Total flux subtracted in 200 components = 0.00388329 Jy ! Clean residual min=-0.004753 max=0.004048 Jy/beam ! Clean residual mean=-0.000045 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.86307 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 132 components and 0.86307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363687Jy sigma=0.001150 ! Fit after self-cal, rms=0.363616Jy sigma=0.001150 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337758 Jy ! Component: 100 - total flux cleaned = 0.000639075 Jy ! Component: 150 - total flux cleaned = 0.000976701 Jy ! Component: 200 - total flux cleaned = 0.00116276 Jy ! Total flux subtracted in 200 components = 0.00116276 Jy ! Clean residual min=-0.004596 max=0.003793 Jy/beam ! Clean residual mean=-0.000044 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.864232 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 136 components and 0.864232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363591Jy sigma=0.001150 ! Fit after self-cal, rms=0.363587Jy sigma=0.001150 ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8446 mas, bmaj=1.063 mas, bpa=-85.55 degrees ! Estimated noise=982.558 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8446 x 1.063 at -85.55 degrees (North through East) ! Clean map min=-0.0046622 max=0.62217 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363587Jy sigma=0.001150 ! Fit after self-cal, rms=0.876714Jy sigma=0.000979 ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8448 mas, bmaj=1.062 mas, bpa=-85.59 degrees ! Estimated noise=983.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000880991 Jy ! Component: 100 - total flux cleaned = 0.000881287 Jy ! Component: 150 - total flux cleaned = 0.000641491 Jy ! Component: 200 - total flux cleaned = 0.000567918 Jy ! Total flux subtracted in 200 components = 0.000567918 Jy ! Clean residual min=-0.004462 max=0.004302 Jy/beam ! Clean residual mean=-0.000020 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.8648 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 146 components and 0.8648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.876665Jy sigma=0.000978 ! Fit after self-cal, rms=0.876683Jy sigma=0.000978 ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.84115e-05 Jy ! Component: 100 - total flux cleaned = -0.000216146 Jy ! Component: 150 - total flux cleaned = -0.000146959 Jy ! Component: 200 - total flux cleaned = -0.000147115 Jy ! Total flux subtracted in 200 components = -0.000147115 Jy ! Clean residual min=-0.004396 max=0.004248 Jy/beam ! Clean residual mean=-0.000020 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.864653 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 154 components and 0.864653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.876652Jy sigma=0.000978 ! Fit after self-cal, rms=0.876631Jy sigma=0.000978 ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.876631Jy sigma=0.000978 ! Fit after self-cal, rms=1.386071Jy sigma=0.000978 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.9478 mas, bmaj=0.9722 mas, bpa=85.29 degrees ! Estimated noise=1299.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.506546 Jy ! Component: 100 - total flux cleaned = 0.639576 Jy ! Component: 150 - total flux cleaned = 0.698018 Jy ! Component: 200 - total flux cleaned = 0.729768 Jy ! Total flux subtracted in 200 components = 0.729768 Jy ! Clean residual min=-0.011199 max=0.016317 Jy/beam ! Clean residual mean=-0.000120 rms=0.002316 Jy/beam ! Combined flux in latest and established models = 0.729768 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.729768 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8434 mas, bmaj=1.062 mas, bpa=-85.62 degrees ! Estimated noise=983.395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270057 Jy ! Component: 100 - total flux cleaned = 0.0460434 Jy ! Component: 150 - total flux cleaned = 0.0608556 Jy ! Component: 200 - total flux cleaned = 0.0728404 Jy ! Total flux subtracted in 200 components = 0.0728404 Jy ! Clean residual min=-0.006409 max=0.008176 Jy/beam ! Clean residual mean=-0.000046 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.802609 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 53 components and 0.802609 Jy ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (17.2, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010026 Jy ! Component: 100 - total flux cleaned = 0.0182903 Jy ! Component: 150 - total flux cleaned = 0.0253647 Jy ! Component: 200 - total flux cleaned = 0.031491 Jy ! Total flux subtracted in 200 components = 0.031491 Jy ! Clean residual min=-0.005062 max=0.005259 Jy/beam ! Clean residual mean=-0.000031 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.8341 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 81 components and 0.8341 Jy ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (2.4, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534707 Jy ! Component: 100 - total flux cleaned = 0.00873329 Jy ! Component: 150 - total flux cleaned = 0.0118281 Jy ! Component: 200 - total flux cleaned = 0.0144974 Jy ! Total flux subtracted in 200 components = 0.0144974 Jy ! Clean residual min=-0.004567 max=0.004577 Jy/beam ! Clean residual mean=-0.000025 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.848597 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 94 components and 0.848597 Jy ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (2, -40.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351098 Jy ! Component: 100 - total flux cleaned = 0.0054184 Jy ! Component: 150 - total flux cleaned = 0.00679139 Jy ! Component: 200 - total flux cleaned = 0.00782905 Jy ! Total flux subtracted in 200 components = 0.00782905 Jy ! Clean residual min=-0.004174 max=0.004180 Jy/beam ! Clean residual mean=-0.000024 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.856426 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 109 components and 0.856426 Jy ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=2.636 mas, bmaj=3.06 mas, bpa=-13.5 degrees ! Estimated noise=1117.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040004 Jy ! Component: 100 - total flux cleaned = 0.00645471 Jy ! Component: 150 - total flux cleaned = 0.00779213 Jy ! Component: 200 - total flux cleaned = 0.00879888 Jy ! Total flux subtracted in 200 components = 0.00879888 Jy ! Clean residual min=-0.003767 max=0.003537 Jy/beam ! Clean residual mean=-0.000041 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.865225 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068992 Jy ! Component: 100 - total flux cleaned = 0.0013124 Jy ! Component: 150 - total flux cleaned = 0.00188043 Jy ! Component: 200 - total flux cleaned = 0.0023993 Jy ! Total flux subtracted in 200 components = 0.0023993 Jy ! Clean residual min=-0.003681 max=0.003391 Jy/beam ! Clean residual mean=-0.000038 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.867624 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 154 components and 0.867624 Jy ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8434 mas, bmaj=1.062 mas, bpa=-85.62 degrees ! Estimated noise=983.395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011332 Jy ! Component: 100 - total flux cleaned = -0.00081002 Jy ! Component: 150 - total flux cleaned = -0.000408031 Jy ! Component: 200 - total flux cleaned = -0.000317284 Jy ! Total flux subtracted in 200 components = -0.000317284 Jy ! Clean residual min=-0.003934 max=0.004412 Jy/beam ! Clean residual mean=-0.000019 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.867307 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 164 components and 0.867307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.385880Jy sigma=0.000978 ! Fit after self-cal, rms=1.385918Jy sigma=0.000977 wmodel J1658+0515_X_2008_04_02_pus_map.mod ! Writing 164 model components to file: J1658+0515_X_2008_04_02_pus_map.mod wobs J1658+0515_X_2008_04_02_pus_uvs.fits ! Writing UV FITS file: J1658+0515_X_2008_04_02_pus_uvs.fits wwins J1658+0515_X_2008_04_02_pus_map.win ! wwins: Wrote 10 windows to J1658+0515_X_2008_04_02_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.34824e-05 Jy ! Component: 100 - total flux cleaned = -0.000461121 Jy ! Component: 150 - total flux cleaned = -0.000876667 Jy ! Component: 200 - total flux cleaned = -0.00114445 Jy ! Component: 250 - total flux cleaned = -0.00114581 Jy ! Component: 300 - total flux cleaned = -0.00127287 Jy ! Component: 350 - total flux cleaned = -0.0014592 Jy ! Component: 400 - total flux cleaned = -0.00170169 Jy ! Component: 450 - total flux cleaned = -0.00188051 Jy ! Component: 500 - total flux cleaned = -0.00217549 Jy ! Component: 550 - total flux cleaned = -0.00240775 Jy ! Component: 600 - total flux cleaned = -0.0025225 Jy ! Component: 650 - total flux cleaned = -0.00280531 Jy ! Component: 700 - total flux cleaned = -0.0030284 Jy ! Component: 750 - total flux cleaned = -0.00302807 Jy ! Component: 800 - total flux cleaned = -0.00313709 Jy ! Component: 850 - total flux cleaned = -0.00329888 Jy ! Component: 900 - total flux cleaned = -0.00324507 Jy ! Component: 950 - total flux cleaned = -0.00345757 Jy ! Component: 1000 - total flux cleaned = -0.00361441 Jy ! Component: 1050 - total flux cleaned = -0.00361457 Jy ! Component: 1100 - total flux cleaned = -0.00376952 Jy ! Component: 1150 - total flux cleaned = -0.00402654 Jy ! Component: 1200 - total flux cleaned = -0.00392407 Jy ! Component: 1250 - total flux cleaned = -0.00432794 Jy ! Component: 1300 - total flux cleaned = -0.00442822 Jy ! Component: 1350 - total flux cleaned = -0.00452751 Jy ! Component: 1400 - total flux cleaned = -0.00457674 Jy ! Component: 1450 - total flux cleaned = -0.00472341 Jy ! Component: 1500 - total flux cleaned = -0.00486937 Jy ! Component: 1550 - total flux cleaned = -0.00515848 Jy ! Component: 1600 - total flux cleaned = -0.00515858 Jy ! Component: 1650 - total flux cleaned = -0.00539646 Jy ! Component: 1700 - total flux cleaned = -0.00539635 Jy ! Component: 1750 - total flux cleaned = -0.00563044 Jy ! Component: 1800 - total flux cleaned = -0.00567675 Jy ! Component: 1850 - total flux cleaned = -0.00567686 Jy ! Component: 1900 - total flux cleaned = -0.00572313 Jy ! Component: 1950 - total flux cleaned = -0.00581456 Jy ! Component: 2000 - total flux cleaned = -0.00576917 Jy ! Component: 2050 - total flux cleaned = -0.00603834 Jy ! Component: 2100 - total flux cleaned = -0.00581491 Jy ! Component: 2150 - total flux cleaned = -0.00577061 Jy ! Component: 2200 - total flux cleaned = -0.00599056 Jy ! Component: 2250 - total flux cleaned = -0.00599024 Jy ! Component: 2300 - total flux cleaned = -0.0058159 Jy ! Component: 2350 - total flux cleaned = -0.00590268 Jy ! Component: 2400 - total flux cleaned = -0.00581685 Jy ! Component: 2450 - total flux cleaned = -0.00585954 Jy ! Component: 2500 - total flux cleaned = -0.00581685 Jy ! Component: 2550 - total flux cleaned = -0.00581733 Jy ! Component: 2600 - total flux cleaned = -0.00581726 Jy ! Component: 2650 - total flux cleaned = -0.00594263 Jy ! Component: 2700 - total flux cleaned = -0.00594258 Jy ! Component: 2750 - total flux cleaned = -0.00606621 Jy ! Component: 2800 - total flux cleaned = -0.00598416 Jy ! Component: 2850 - total flux cleaned = -0.00610633 Jy ! Component: 2900 - total flux cleaned = -0.00602552 Jy ! Component: 2950 - total flux cleaned = -0.0060254 Jy ! Component: 3000 - total flux cleaned = -0.00602609 Jy ! Component: 3050 - total flux cleaned = -0.00622569 Jy ! Component: 3100 - total flux cleaned = -0.00594782 Jy ! Component: 3150 - total flux cleaned = -0.00594782 Jy ! Component: 3200 - total flux cleaned = -0.00602639 Jy ! Component: 3250 - total flux cleaned = -0.00614321 Jy ! Component: 3300 - total flux cleaned = -0.0060268 Jy ! Component: 3350 - total flux cleaned = -0.00618173 Jy ! Component: 3400 - total flux cleaned = -0.00610456 Jy ! Component: 3450 - total flux cleaned = -0.00606622 Jy ! Component: 3500 - total flux cleaned = -0.0060287 Jy ! Component: 3550 - total flux cleaned = -0.00602877 Jy ! Component: 3600 - total flux cleaned = -0.00580254 Jy ! Component: 3650 - total flux cleaned = -0.00584012 Jy ! Component: 3700 - total flux cleaned = -0.00580287 Jy ! Component: 3750 - total flux cleaned = -0.00591479 Jy ! Component: 3800 - total flux cleaned = -0.00584095 Jy ! Component: 3850 - total flux cleaned = -0.0056199 Jy ! Component: 3900 - total flux cleaned = -0.00565684 Jy ! Component: 3950 - total flux cleaned = -0.00554736 Jy ! Component: 4000 - total flux cleaned = -0.00561976 Jy ! Component: 4050 - total flux cleaned = -0.00565578 Jy ! Total flux subtracted in 4096 components = -0.00551168 Jy ! Clean residual min=-0.001934 max=0.002202 Jy/beam ! Clean residual mean=-0.000010 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.861795 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 491 components and 0.861795 Jy wmap "J1658+0515_X_2008_04_02_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8434 x 1.062 at -85.62 degrees (North through East) ! Clean map min=-0.0028187 max=0.63121 Jy/beam ! Writing clean map to FITS file: J1658+0515_X_2008_04_02_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.63121 invert ! Inverting map ! Your choice of large map pixels excluded 6.59% of the data. ! The y-axis pixel size should ideally be below 0.1841 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000601571 device "J1658+0515_X_2008_04_02_pus\_map.eps/VPS" ! Attempting to open device: 'J1658+0515_X_2008_04_02_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.285913 0.285913 0.571826 1.14365 2.28731 4.57461 9.14922 18.2984 36.5969 73.1938 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.631 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8434 x 1.062 at -85.62 degrees (North through East) ! Clean map min=-0.0028187 max=0.63121 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1658+0515_X_2008_04_02_pus\_map.gif/vgif" ! Attempting to open device: 'J1658+0515_X_2008_04_02_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1658+0515_X_2008_04_02_pus_uvs.log closed on Sun Feb 21 21:14:11 2010