! Started logfile: J1336-1529_S_2008_04_02_pus_uvs.log on Mon Feb 22 21:40:28 2010 obs J1336-1529_S_2008_04_02_pus_uva.fits ! Reading UV FITS file: J1336-1529_S_2008_04_02_pus_uva.fits ! AN table 1: 280 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.319762 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1336-1529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 984 lines of history. ! ! Reading 42976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1916 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1916 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1916 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1916 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927092Jy sigma=0.008696 ! Fit after self-cal, rms=0.879205Jy sigma=0.008286 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=6.34 mas, bpa=-3.345 degrees ! Estimated noise=835.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100227 Jy ! Component: 100 - total flux cleaned = 0.124597 Jy ! Total flux subtracted in 100 components = 0.124597 Jy ! Clean residual min=-0.005900 max=0.009575 Jy/beam ! Clean residual mean=0.000384 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.124597 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.124597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146012Jy sigma=0.001291 ! Fit after self-cal, rms=0.146034Jy sigma=0.001291 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=7.973 mas, bpa=-1.313 degrees ! Estimated noise=367.083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119293 Jy ! Component: 100 - total flux cleaned = 0.0167774 Jy ! Component: 150 - total flux cleaned = 0.0189807 Jy ! Component: 200 - total flux cleaned = 0.0194583 Jy ! Total flux subtracted in 200 components = 0.0194583 Jy ! Clean residual min=-0.003618 max=0.005296 Jy/beam ! Clean residual mean=0.000220 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.144055 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 28 components and 0.144055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145137Jy sigma=0.001283 ! Fit after self-cal, rms=0.145196Jy sigma=0.001283 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HH 1.00* HN 1.14 ! KK 1.00* KP 1.04 LA 1.21 MK 0.88 ! NL 0.95 NY 1.00* ON 1.00* OV 0.97 ! PT 1.00 SC 1.00 WZ 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.14 HH 1.00* HN 1.26 ! KK 1.00* KP 1.02 LA 1.10 MK 0.92 ! NL 0.95 NY 1.00* ON 1.00* OV 1.01 ! PT 1.00 SC 1.05 WZ 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.15 HH 1.00* HN 1.21 ! KK 1.00* KP 1.02 LA 0.85 MK 0.97 ! NL 1.01 NY 1.00* ON 1.00* OV 1.05 ! PT 1.06 SC 0.97 WZ 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.16 HH 1.00* HN 1.13 ! KK 1.00* KP 0.94 LA 0.73 MK 1.00 ! NL 0.91 NY 1.00* ON 1.00* OV 0.84 ! PT 0.87 SC 1.00 WZ 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.145196Jy sigma=0.001283 ! Fit after self-cal, rms=0.139673Jy sigma=0.001265 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=7.919 mas, bpa=-1.465 degrees ! Estimated noise=365.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159944 Jy ! Component: 100 - total flux cleaned = 0.00138818 Jy ! Component: 150 - total flux cleaned = 0.00143397 Jy ! Component: 200 - total flux cleaned = 0.00150885 Jy ! Total flux subtracted in 200 components = 0.00150885 Jy ! Clean residual min=-0.001464 max=0.001822 Jy/beam ! Clean residual mean=0.000086 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.145564 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.145564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139619Jy sigma=0.001265 ! Fit after self-cal, rms=0.139699Jy sigma=0.001264 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139699Jy sigma=0.001264 ! Fit after self-cal, rms=0.139819Jy sigma=0.001263 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=7.928 mas, bpa=-1.393 degrees ! Estimated noise=365.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068358 Jy ! Component: 100 - total flux cleaned = 0.000874775 Jy ! Component: 150 - total flux cleaned = 0.000902432 Jy ! Component: 200 - total flux cleaned = 0.000877189 Jy ! Total flux subtracted in 200 components = 0.000877189 Jy ! Clean residual min=-0.001413 max=0.001838 Jy/beam ! Clean residual mean=0.000053 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.146441 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.146441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139803Jy sigma=0.001263 ! Fit after self-cal, rms=0.139822Jy sigma=0.001263 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-49, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164895 Jy ! Component: 100 - total flux cleaned = 0.00247246 Jy ! Component: 150 - total flux cleaned = 0.00280169 Jy ! Component: 200 - total flux cleaned = 0.00293654 Jy ! Total flux subtracted in 200 components = 0.00293654 Jy ! Clean residual min=-0.001367 max=0.001460 Jy/beam ! Clean residual mean=0.000052 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.149378 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 85 components and 0.149378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139798Jy sigma=0.001263 ! Fit after self-cal, rms=0.139796Jy sigma=0.001263 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139796Jy sigma=0.001263 ! Fit after self-cal, rms=0.139698Jy sigma=0.001263 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=7.928 mas, bpa=-1.435 degrees ! Estimated noise=365.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541018 Jy ! Component: 100 - total flux cleaned = 0.000619423 Jy ! Component: 150 - total flux cleaned = 0.000715336 Jy ! Component: 200 - total flux cleaned = 0.000759372 Jy ! Total flux subtracted in 200 components = 0.000759372 Jy ! Clean residual min=-0.001402 max=0.001470 Jy/beam ! Clean residual mean=0.000047 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.150137 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.150137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139688Jy sigma=0.001263 ! Fit after self-cal, rms=0.139689Jy sigma=0.001263 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103621 Jy ! Component: 100 - total flux cleaned = 0.000125283 Jy ! Component: 150 - total flux cleaned = 0.000125349 Jy ! Component: 200 - total flux cleaned = 0.000125694 Jy ! Total flux subtracted in 200 components = 0.000125694 Jy ! Clean residual min=-0.001410 max=0.001461 Jy/beam ! Clean residual mean=0.000047 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.150263 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 0.150263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139683Jy sigma=0.001263 ! Fit after self-cal, rms=0.139683Jy sigma=0.001263 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139683Jy sigma=0.001263 ! Fit after self-cal, rms=0.139710Jy sigma=0.001263 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.25 mas, bmaj=14.98 mas, bpa=2.993 degrees ! Estimated noise=432.131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500505 Jy ! Component: 100 - total flux cleaned = 0.000663848 Jy ! Component: 150 - total flux cleaned = 0.000797912 Jy ! Component: 200 - total flux cleaned = 0.000867981 Jy ! Total flux subtracted in 200 components = 0.000867981 Jy ! Clean residual min=-0.001350 max=0.001506 Jy/beam ! Clean residual mean=0.000086 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.151131 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 110 components and 0.151131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139709Jy sigma=0.001263 ! Fit after self-cal, rms=0.139708Jy sigma=0.001263 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014659 Jy ! Component: 100 - total flux cleaned = 0.000195988 Jy ! Component: 150 - total flux cleaned = 0.00022592 Jy ! Component: 200 - total flux cleaned = 0.000253952 Jy ! Total flux subtracted in 200 components = 0.000253952 Jy ! Clean residual min=-0.001352 max=0.001512 Jy/beam ! Clean residual mean=0.000084 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.151385 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 116 components and 0.151385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139708Jy sigma=0.001263 ! Fit after self-cal, rms=0.139708Jy sigma=0.001263 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=7.927 mas, bpa=-1.464 degrees ! Estimated noise=365.488 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 7.927 at -1.464 degrees (North through East) ! Clean map min=-0.0019889 max=0.13116 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.702 mas, bmaj=6.31 mas, bpa=-3.551 degrees ! Estimated noise=822.712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0983428 Jy ! Component: 100 - total flux cleaned = 0.123046 Jy ! Component: 150 - total flux cleaned = 0.133611 Jy ! Component: 200 - total flux cleaned = 0.138727 Jy ! Total flux subtracted in 200 components = 0.138727 Jy ! Clean residual min=-0.004158 max=0.003739 Jy/beam ! Clean residual mean=0.000092 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.138727 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.138727 Jy ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=7.927 mas, bpa=-1.464 degrees ! Estimated noise=365.488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436505 Jy ! Component: 100 - total flux cleaned = 0.00684693 Jy ! Component: 150 - total flux cleaned = 0.00846624 Jy ! Component: 200 - total flux cleaned = 0.00934316 Jy ! Total flux subtracted in 200 components = 0.00934316 Jy ! Clean residual min=-0.001490 max=0.001624 Jy/beam ! Clean residual mean=0.000053 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.14807 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.14807 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.25 mas, bmaj=14.98 mas, bpa=2.993 degrees ! Estimated noise=432.131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123169 Jy ! Component: 100 - total flux cleaned = 0.00209611 Jy ! Component: 150 - total flux cleaned = 0.00261864 Jy ! Component: 200 - total flux cleaned = 0.00274695 Jy ! Total flux subtracted in 200 components = 0.00274695 Jy ! Clean residual min=-0.001470 max=0.001412 Jy/beam ! Clean residual mean=0.000089 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.150817 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.43902e-05 Jy ! Component: 100 - total flux cleaned = 0.000179078 Jy ! Component: 150 - total flux cleaned = 0.000270081 Jy ! Component: 200 - total flux cleaned = 0.000364807 Jy ! Total flux subtracted in 200 components = 0.000364807 Jy ! Clean residual min=-0.001417 max=0.001423 Jy/beam ! Clean residual mean=0.000088 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.151182 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 85 components and 0.151182 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=7.927 mas, bpa=-1.464 degrees ! Estimated noise=365.488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00040785 Jy ! Component: 100 - total flux cleaned = -0.000443823 Jy ! Component: 150 - total flux cleaned = -0.000444492 Jy ! Component: 200 - total flux cleaned = -0.000445228 Jy ! Total flux subtracted in 200 components = -0.000445228 Jy ! Clean residual min=-0.001454 max=0.001462 Jy/beam ! Clean residual mean=0.000046 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.150737 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.150737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139717Jy sigma=0.001263 ! Fit after self-cal, rms=0.139722Jy sigma=0.001263 wmodel J1336-1529_S_2008_04_02_pus_map.mod ! Writing 102 model components to file: J1336-1529_S_2008_04_02_pus_map.mod wobs J1336-1529_S_2008_04_02_pus_uvs.fits ! Writing UV FITS file: J1336-1529_S_2008_04_02_pus_uvs.fits wwins J1336-1529_S_2008_04_02_pus_map.win ! wwins: Wrote 3 windows to J1336-1529_S_2008_04_02_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175571 Jy ! Component: 100 - total flux cleaned = 0.000524386 Jy ! Component: 150 - total flux cleaned = 0.000810577 Jy ! Component: 200 - total flux cleaned = 0.00108515 Jy ! Component: 250 - total flux cleaned = 0.00132995 Jy ! Component: 300 - total flux cleaned = 0.00154687 Jy ! Component: 350 - total flux cleaned = 0.00179473 Jy ! Component: 400 - total flux cleaned = 0.00199826 Jy ! Component: 450 - total flux cleaned = 0.00212447 Jy ! Component: 500 - total flux cleaned = 0.00226509 Jy ! Component: 550 - total flux cleaned = 0.00240222 Jy ! Component: 600 - total flux cleaned = 0.00255293 Jy ! Component: 650 - total flux cleaned = 0.00270028 Jy ! Component: 700 - total flux cleaned = 0.00292558 Jy ! Component: 750 - total flux cleaned = 0.00308379 Jy ! Component: 800 - total flux cleaned = 0.00325521 Jy ! Component: 850 - total flux cleaned = 0.00342378 Jy ! Component: 900 - total flux cleaned = 0.00358974 Jy ! Component: 950 - total flux cleaned = 0.00370869 Jy ! Component: 1000 - total flux cleaned = 0.00386972 Jy ! Component: 1050 - total flux cleaned = 0.00395638 Jy ! Component: 1100 - total flux cleaned = 0.00408497 Jy ! Component: 1150 - total flux cleaned = 0.0041694 Jy ! Component: 1200 - total flux cleaned = 0.00426664 Jy ! Component: 1250 - total flux cleaned = 0.00436271 Jy ! Component: 1300 - total flux cleaned = 0.00444409 Jy ! Component: 1350 - total flux cleaned = 0.00451099 Jy ! Component: 1400 - total flux cleaned = 0.0045773 Jy ! Component: 1450 - total flux cleaned = 0.00468183 Jy ! Component: 1500 - total flux cleaned = 0.00474646 Jy ! Component: 1550 - total flux cleaned = 0.0048611 Jy ! Component: 1600 - total flux cleaned = 0.00491158 Jy ! Component: 1650 - total flux cleaned = 0.0050118 Jy ! Component: 1700 - total flux cleaned = 0.00512321 Jy ! Component: 1750 - total flux cleaned = 0.00520906 Jy ! Component: 1800 - total flux cleaned = 0.00530602 Jy ! Component: 1850 - total flux cleaned = 0.00539004 Jy ! Component: 1900 - total flux cleaned = 0.00547323 Jy ! Component: 1950 - total flux cleaned = 0.0055202 Jy ! Component: 2000 - total flux cleaned = 0.00553213 Jy ! Total flux subtracted in 2048 components = 0.00563601 Jy ! Clean residual min=-0.000945 max=0.000764 Jy/beam ! Clean residual mean=0.000028 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.156373 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 221 components and 0.156373 Jy wmap "J1336-1529_S_2008_04_02_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 7.927 at -1.464 degrees (North through East) ! Clean map min=-0.0014952 max=0.13105 Jy/beam ! Writing clean map to FITS file: J1336-1529_S_2008_04_02_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.131051 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022953 device "J1336-1529_S_2008_04_02_pus\_map.eps/VPS" ! Attempting to open device: 'J1336-1529_S_2008_04_02_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.525438 0.525438 1.05088 2.10175 4.20351 8.40701 16.814 33.628 67.2561 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.131 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 7.927 at -1.464 degrees (North through East) ! Clean map min=-0.0014952 max=0.13105 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1336-1529_S_2008_04_02_pus\_map.gif/vgif" ! Attempting to open device: 'J1336-1529_S_2008_04_02_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1336-1529_S_2008_04_02_pus_uvs.log closed on Mon Feb 22 21:40:35 2010