! Started logfile: J2038+5119_X_2007_12_05_pus_uvs.log on Wed Sep 8 21:28:04 2010 obs J2038+5119_X_2007_12_05_pus_uva.fits ! Reading UV FITS file: J2038+5119_X_2007_12_05_pus_uva.fits ! AN table 1: 57 integrations on 136 of 136 possible baselines. ! AN table 2: 37 integrations on 136 of 136 possible baselines. ! AN table 3: 22 integrations on 136 of 136 possible baselines. ! AN table 4: 23 integrations on 136 of 136 possible baselines. ! AN table 5: 24 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.0991068 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2038+5119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1501 lines of history. ! ! Reading 8788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 712 telescope corrections were flagged in sub-array 1. ! A total of 599 telescope corrections were flagged in sub-array 2. ! A total of 278 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 224 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 712 telescope corrections were flagged in sub-array 1. ! A total of 599 telescope corrections were flagged in sub-array 2. ! A total of 278 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 224 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 712 telescope corrections were flagged in sub-array 1. ! A total of 599 telescope corrections were flagged in sub-array 2. ! A total of 278 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 224 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 712 telescope corrections were flagged in sub-array 1. ! A total of 599 telescope corrections were flagged in sub-array 2. ! A total of 287 telescope corrections were flagged in sub-array 3. ! A total of 205 telescope corrections were flagged in sub-array 4. ! A total of 224 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.370845Jy sigma=0.014295 ! Fit after self-cal, rms=0.757725Jy sigma=0.007802 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.99% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.5799 mas, bmaj=0.9616 mas, bpa=33.79 degrees ! Estimated noise=1226.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.21067 Jy ! Component: 100 - total flux cleaned = 1.5183 Jy ! Total flux subtracted in 100 components = 1.5183 Jy ! Clean residual min=-0.038549 max=0.135870 Jy/beam ! Clean residual mean=0.001261 rms=0.013804 Jy/beam ! Combined flux in latest and established models = 1.5183 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.51831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391654Jy sigma=0.003905 ! Fit after self-cal, rms=0.391492Jy sigma=0.003903 ! Inverting map ! Your choice of large map pixels excluded 1.99% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15218 Jy ! Component: 100 - total flux cleaned = 0.232952 Jy ! Total flux subtracted in 100 components = 0.232952 Jy ! Clean residual min=-0.026440 max=0.067761 Jy/beam ! Clean residual mean=0.000857 rms=0.009188 Jy/beam ! Combined flux in latest and established models = 1.75126 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 1.75126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299696Jy sigma=0.002905 ! Fit after self-cal, rms=0.299450Jy sigma=0.002903 ! Inverting map ! Your choice of large map pixels excluded 1.99% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Added new window around map position (-4.4, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0694489 Jy ! Component: 100 - total flux cleaned = 0.117319 Jy ! Total flux subtracted in 100 components = 0.117319 Jy ! Clean residual min=-0.022237 max=0.044736 Jy/beam ! Clean residual mean=0.000617 rms=0.007694 Jy/beam ! Combined flux in latest and established models = 1.86858 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 1.86858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266089Jy sigma=0.002490 ! Fit after self-cal, rms=0.264683Jy sigma=0.002477 ! Inverting map ! Your choice of large map pixels excluded 1.99% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.99% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.6811 mas, bmaj=1.28 mas, bpa=33.05 degrees ! Estimated noise=753.836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.4, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0935669 Jy ! Component: 100 - total flux cleaned = 0.154454 Jy ! Component: 150 - total flux cleaned = 0.1989 Jy ! Component: 200 - total flux cleaned = 0.232199 Jy ! Total flux subtracted in 200 components = 0.232199 Jy ! Clean residual min=-0.028870 max=0.039387 Jy/beam ! Clean residual mean=0.000376 rms=0.008394 Jy/beam ! Combined flux in latest and established models = 2.10078 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 76 components and 2.10078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224726Jy sigma=0.001970 ! Fit after self-cal, rms=0.221553Jy sigma=0.001931 ! Inverting map ! Your choice of large map pixels excluded 1.99% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HH 1.00* HN 1.11 ! KB 1.00* KP 1.00 LA 0.95 MK 1.00* ! NL 1.06 NY 0.90 ON 1.02 OV 1.04 ! PT 0.95 SV 1.07 TS 1.00* WZ 1.10 ! ZC 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* ON 0.00* OV 0.00* ! PT 0.00* SV 0.00* TS 0.00* WZ 0.00* ! ZC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 1.00* HH 1.00* HN 1.15 ! KB 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.94 ON 0.99 OV 1.00* ! PT 1.00* SV 1.04 TS 1.00* WZ 1.07 ! ZC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 0.95 HH 1.00* HN 1.17 ! KB 1.00 KP 0.99 LA 0.93 MK 1.00* ! NL 1.00 NY 0.99 ON 1.00* OV 0.98 ! PT 0.95 SV 1.00* TS 0.98 WZ 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 0.97 HH 1.00* HN 1.00* ! KB 1.05 KP 1.02 LA 0.99 MK 1.00* ! NL 1.08 NY 1.00* ON 1.00* OV 0.97 ! PT 0.97 SV 1.00* TS 1.03 WZ 1.00* ! ZC 1.00* ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HH 1.00* HN 1.12 ! KB 1.00* KP 0.96 LA 0.92 MK 1.00* ! NL 1.02 NY 0.95 ON 1.04 OV 1.03 ! PT 1.00 SV 1.03 TS 1.00* WZ 1.07 ! ZC 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* ON 0.00* OV 0.00* ! PT 0.00* SV 0.00* TS 0.00* WZ 0.00* ! ZC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00* HH 1.00* HN 1.14 ! KB 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.96 ON 1.02 OV 1.00* ! PT 1.00* SV 0.98 TS 1.00* WZ 1.05 ! ZC 1.10 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.95 HH 1.00* HN 1.19 ! KB 1.01 KP 0.95 LA 0.91 MK 1.00* ! NL 0.97 NY 1.00 ON 1.00* OV 0.95 ! PT 1.00 SV 1.00* TS 0.99 WZ 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.97 HH 1.00* HN 1.00* ! KB 1.05 KP 0.97 LA 0.97 MK 1.00* ! NL 1.05 NY 1.00* ON 1.00* OV 0.95 ! PT 1.02 SV 1.00* TS 1.03 WZ 1.00* ! ZC 1.00* ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HH 1.00* HN 1.12 ! KB 1.00* KP 1.00 LA 0.95 MK 1.00* ! NL 1.03 NY 0.93 ON 1.05 OV 1.06 ! PT 1.01 SV 1.15 TS 1.00* WZ 1.07 ! ZC 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* ON 0.00* OV 0.00* ! PT 0.00* SV 0.00* TS 0.00* WZ 0.00* ! ZC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 1.00* HH 1.00* HN 1.13 ! KB 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.97 ON 0.94 OV 1.00* ! PT 1.00* SV 1.02 TS 1.00* WZ 1.02 ! ZC 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 0.95 HH 1.00* HN 1.13 ! KB 1.00 KP 0.98 LA 0.94 MK 1.00* ! NL 0.99 NY 1.01 ON 1.00* OV 1.00 ! PT 1.01 SV 1.00* TS 0.98 WZ 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.97 HH 1.00* HN 1.00* ! KB 1.04 KP 0.99 LA 0.99 MK 1.00* ! NL 1.05 NY 1.00* ON 1.00* OV 1.00 ! PT 1.02 SV 1.00* TS 1.01 WZ 1.00* ! ZC 1.00* ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HH 1.00* HN 1.10 ! KB 1.00* KP 1.00 LA 0.95 MK 1.00* ! NL 1.05 NY 0.95 ON 1.00 OV 1.07 ! PT 1.00 SV 1.10 TS 1.00* WZ 1.01 ! ZC 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* ON 0.00* OV 0.00* ! PT 0.00* SV 0.00* TS 0.00* WZ 0.00* ! ZC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.00* HH 1.00* HN 1.16 ! KB 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.94 ON 0.97 OV 1.00* ! PT 1.00* SV 1.02 TS 1.00* WZ 1.00 ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.96 HH 1.00* HN 1.14 ! KB 1.02 KP 0.97 LA 0.93 MK 1.00* ! NL 1.02 NY 1.00 ON 1.00* OV 0.98 ! PT 0.99 SV 1.00* TS 0.99 WZ 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.98 HH 1.00* HN 1.00* ! KB 1.04 KP 0.99 LA 0.98 MK 1.00* ! NL 1.07 NY 1.00* ON 1.00* OV 1.00 ! PT 1.00 SV 1.00* TS 1.00 WZ 1.00* ! ZC 1.00* ! ! ! Fit before self-cal, rms=0.221553Jy sigma=0.001931 ! Fit after self-cal, rms=0.186944Jy sigma=0.001651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.6782 mas, bmaj=1.315 mas, bpa=33.83 degrees ! Estimated noise=761.708 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.8, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400726 Jy ! Component: 100 - total flux cleaned = 0.0632128 Jy ! Component: 150 - total flux cleaned = 0.0772952 Jy ! Component: 200 - total flux cleaned = 0.084241 Jy ! Total flux subtracted in 200 components = 0.084241 Jy ! Clean residual min=-0.020315 max=0.019059 Jy/beam ! Clean residual mean=-0.001324 rms=0.005129 Jy/beam ! Combined flux in latest and established models = 2.18502 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 2.18502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178397Jy sigma=0.001526 ! Fit after self-cal, rms=0.177871Jy sigma=0.001519 ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177871Jy sigma=0.001519 ! Fit after self-cal, rms=0.167366Jy sigma=0.001399 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.6795 mas, bmaj=1.315 mas, bpa=33.76 degrees ! Estimated noise=763.552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190978 Jy ! Component: 100 - total flux cleaned = 0.0297518 Jy ! Component: 150 - total flux cleaned = 0.0348807 Jy ! Component: 200 - total flux cleaned = 0.0374166 Jy ! Total flux subtracted in 200 components = 0.0374166 Jy ! Clean residual min=-0.011093 max=0.014960 Jy/beam ! Clean residual mean=-0.000697 rms=0.003128 Jy/beam ! Combined flux in latest and established models = 2.22243 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 118 components and 2.22243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165263Jy sigma=0.001364 ! Fit after self-cal, rms=0.165160Jy sigma=0.001362 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.6, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014694 Jy ! Component: 100 - total flux cleaned = 0.0181569 Jy ! Component: 150 - total flux cleaned = 0.0199382 Jy ! Component: 200 - total flux cleaned = 0.0208382 Jy ! Total flux subtracted in 200 components = 0.0208382 Jy ! Clean residual min=-0.010915 max=0.010326 Jy/beam ! Clean residual mean=-0.001104 rms=0.002790 Jy/beam ! Combined flux in latest and established models = 2.24327 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 2.24327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163873Jy sigma=0.001342 ! Fit after self-cal, rms=0.163768Jy sigma=0.001341 ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163768Jy sigma=0.001341 ! Fit after self-cal, rms=0.161698Jy sigma=0.001311 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.6812 mas, bmaj=1.316 mas, bpa=33.68 degrees ! Estimated noise=763.895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00760253 Jy ! Component: 100 - total flux cleaned = 0.0102253 Jy ! Component: 150 - total flux cleaned = 0.0116721 Jy ! Component: 200 - total flux cleaned = 0.012744 Jy ! Total flux subtracted in 200 components = 0.012744 Jy ! Clean residual min=-0.008289 max=0.008648 Jy/beam ! Clean residual mean=-0.000513 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 2.25602 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 143 components and 2.25602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160921Jy sigma=0.001298 ! Fit after self-cal, rms=0.160900Jy sigma=0.001297 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247535 Jy ! Component: 100 - total flux cleaned = 0.00321421 Jy ! Component: 150 - total flux cleaned = 0.00371633 Jy ! Component: 200 - total flux cleaned = 0.00402188 Jy ! Total flux subtracted in 200 components = 0.00402188 Jy ! Clean residual min=-0.007842 max=0.007892 Jy/beam ! Clean residual mean=-0.000591 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 2.26004 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 148 components and 2.26004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160591Jy sigma=0.001293 ! Fit after self-cal, rms=0.160591Jy sigma=0.001293 ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160591Jy sigma=0.001293 ! Fit after self-cal, rms=0.160538Jy sigma=0.001290 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=2.888 mas, bmaj=3.122 mas, bpa=-61.51 degrees ! Estimated noise=943.791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456703 Jy ! Component: 100 - total flux cleaned = 0.00656902 Jy ! Component: 150 - total flux cleaned = 0.00749399 Jy ! Component: 200 - total flux cleaned = 0.0083007 Jy ! Total flux subtracted in 200 components = 0.0083007 Jy ! Clean residual min=-0.008904 max=0.008852 Jy/beam ! Clean residual mean=-0.000784 rms=0.002637 Jy/beam ! Combined flux in latest and established models = 2.26834 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 159 components and 2.26834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160481Jy sigma=0.001290 ! Fit after self-cal, rms=0.160468Jy sigma=0.001289 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000687558 Jy ! Component: 100 - total flux cleaned = 0.00109452 Jy ! Component: 150 - total flux cleaned = 0.00137406 Jy ! Component: 200 - total flux cleaned = 0.00163726 Jy ! Total flux subtracted in 200 components = 0.00163726 Jy ! Clean residual min=-0.008678 max=0.008905 Jy/beam ! Clean residual mean=-0.000846 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 2.26998 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 164 components and 2.26998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160433Jy sigma=0.001290 ! Fit after self-cal, rms=0.160430Jy sigma=0.001289 ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.682 mas, bmaj=1.317 mas, bpa=33.59 degrees ! Estimated noise=764.144 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.682 x 1.317 at 33.59 degrees (North through East) ! Clean map min=-0.0067449 max=1.582 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160430Jy sigma=0.001289 ! Fit after self-cal, rms=0.147271Jy sigma=0.001152 ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.6833 mas, bmaj=1.318 mas, bpa=33.67 degrees ! Estimated noise=763.689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00271313 Jy ! Component: 100 - total flux cleaned = -0.00251059 Jy ! Component: 150 - total flux cleaned = -0.00266507 Jy ! Component: 200 - total flux cleaned = -0.0025146 Jy ! Total flux subtracted in 200 components = -0.0025146 Jy ! Clean residual min=-0.006913 max=0.007118 Jy/beam ! Clean residual mean=-0.000300 rms=0.001799 Jy/beam ! Combined flux in latest and established models = 2.26746 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 171 components and 2.26746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146900Jy sigma=0.001146 ! Fit after self-cal, rms=0.146913Jy sigma=0.001146 ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.55455e-06 Jy ! Component: 100 - total flux cleaned = -0.000128408 Jy ! Component: 150 - total flux cleaned = -9.65028e-07 Jy ! Component: 200 - total flux cleaned = -1.4019e-06 Jy ! Total flux subtracted in 200 components = -1.4019e-06 Jy ! Clean residual min=-0.006710 max=0.007049 Jy/beam ! Clean residual mean=-0.000302 rms=0.001761 Jy/beam ! Combined flux in latest and established models = 2.26746 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 174 components and 2.26746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146678Jy sigma=0.001143 ! Fit after self-cal, rms=0.146685Jy sigma=0.001143 ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146685Jy sigma=0.001143 ! Fit after self-cal, rms=0.146748Jy sigma=0.001142 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.5839 mas, bmaj=0.9876 mas, bpa=34.58 degrees ! Estimated noise=1249.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.2093 Jy ! Component: 100 - total flux cleaned = 1.50924 Jy ! Component: 150 - total flux cleaned = 1.64793 Jy ! Component: 200 - total flux cleaned = 1.73813 Jy ! Total flux subtracted in 200 components = 1.73813 Jy ! Clean residual min=-0.022066 max=0.051524 Jy/beam ! Clean residual mean=0.000951 rms=0.007941 Jy/beam ! Combined flux in latest and established models = 1.73813 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 1.73813 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.684 mas, bmaj=1.32 mas, bpa=33.6 degrees ! Estimated noise=763.981 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126982 Jy ! Component: 100 - total flux cleaned = 0.216031 Jy ! Component: 150 - total flux cleaned = 0.282668 Jy ! Component: 200 - total flux cleaned = 0.333459 Jy ! Total flux subtracted in 200 components = 0.333459 Jy ! Clean residual min=-0.013078 max=0.029609 Jy/beam ! Clean residual mean=0.003477 rms=0.005613 Jy/beam ! Combined flux in latest and established models = 2.07158 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 128 components and 2.07158 Jy ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Added new window around map position (-0.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393071 Jy ! Component: 100 - total flux cleaned = 0.0700641 Jy ! Component: 150 - total flux cleaned = 0.0944308 Jy ! Component: 200 - total flux cleaned = 0.113952 Jy ! Total flux subtracted in 200 components = 0.113952 Jy ! Clean residual min=-0.008035 max=0.012768 Jy/beam ! Clean residual mean=0.001381 rms=0.002831 Jy/beam ! Combined flux in latest and established models = 2.18554 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 184 components and 2.18554 Jy ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Added new window around map position (-4, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160308 Jy ! Component: 100 - total flux cleaned = 0.0290394 Jy ! Component: 150 - total flux cleaned = 0.0397533 Jy ! Component: 200 - total flux cleaned = 0.0486393 Jy ! Total flux subtracted in 200 components = 0.0486393 Jy ! Clean residual min=-0.006018 max=0.008945 Jy/beam ! Clean residual mean=0.000492 rms=0.001959 Jy/beam ! Combined flux in latest and established models = 2.23417 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 213 components and 2.23417 Jy ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Added new window around map position (-8.4, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900672 Jy ! Component: 100 - total flux cleaned = 0.0157669 Jy ! Component: 150 - total flux cleaned = 0.0214462 Jy ! Component: 200 - total flux cleaned = 0.0262551 Jy ! Total flux subtracted in 200 components = 0.0262551 Jy ! Clean residual min=-0.005086 max=0.005710 Jy/beam ! Clean residual mean=0.000011 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 2.26043 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 242 components and 2.26043 Jy ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=2.888 mas, bmaj=3.122 mas, bpa=-61.59 degrees ! Estimated noise=941.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668639 Jy ! Component: 100 - total flux cleaned = 0.0111733 Jy ! Component: 150 - total flux cleaned = 0.0137427 Jy ! Component: 200 - total flux cleaned = 0.0151503 Jy ! Total flux subtracted in 200 components = 0.0151503 Jy ! Clean residual min=-0.007039 max=0.006889 Jy/beam ! Clean residual mean=-0.000528 rms=0.002216 Jy/beam ! Combined flux in latest and established models = 2.27558 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117368 Jy ! Component: 100 - total flux cleaned = 0.00180002 Jy ! Component: 150 - total flux cleaned = 0.00208484 Jy ! Component: 200 - total flux cleaned = 0.00221849 Jy ! Total flux subtracted in 200 components = 0.00221849 Jy ! Clean residual min=-0.007043 max=0.006705 Jy/beam ! Clean residual mean=-0.000608 rms=0.002176 Jy/beam ! Combined flux in latest and established models = 2.2778 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 273 components and 2.2778 Jy ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! Estimated beam: bmin=0.684 mas, bmaj=1.32 mas, bpa=33.6 degrees ! Estimated noise=763.981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000645306 Jy ! Component: 100 - total flux cleaned = -0.000340756 Jy ! Component: 150 - total flux cleaned = 0.000103948 Jy ! Component: 200 - total flux cleaned = 0.000271164 Jy ! Total flux subtracted in 200 components = 0.000271164 Jy ! Clean residual min=-0.005630 max=0.005316 Jy/beam ! Clean residual mean=-0.000311 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 2.27807 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 286 components and 2.27807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143901Jy sigma=0.001117 ! Fit after self-cal, rms=0.143646Jy sigma=0.001115 wmodel J2038+5119_X_2007_12_05_pus_map.mod ! Writing 286 model components to file: J2038+5119_X_2007_12_05_pus_map.mod wobs J2038+5119_X_2007_12_05_pus_uvs.fits ! Writing UV FITS file: J2038+5119_X_2007_12_05_pus_uvs.fits wwins J2038+5119_X_2007_12_05_pus_map.win ! wwins: Wrote 8 windows to J2038+5119_X_2007_12_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132717 Jy ! Component: 100 - total flux cleaned = -0.00213798 Jy ! Component: 150 - total flux cleaned = -0.00300381 Jy ! Component: 200 - total flux cleaned = -0.00391671 Jy ! Component: 250 - total flux cleaned = -0.00447837 Jy ! Component: 300 - total flux cleaned = -0.00494728 Jy ! Component: 350 - total flux cleaned = -0.00540489 Jy ! Component: 400 - total flux cleaned = -0.00599975 Jy ! Component: 450 - total flux cleaned = -0.00650661 Jy ! Component: 500 - total flux cleaned = -0.00693191 Jy ! Component: 550 - total flux cleaned = -0.00727952 Jy ! Component: 600 - total flux cleaned = -0.00768863 Jy ! Component: 650 - total flux cleaned = -0.00815724 Jy ! Component: 700 - total flux cleaned = -0.00848567 Jy ! Component: 750 - total flux cleaned = -0.00887311 Jy ! Component: 800 - total flux cleaned = -0.00912684 Jy ! Component: 850 - total flux cleaned = -0.00944013 Jy ! Component: 900 - total flux cleaned = -0.00968675 Jy ! Component: 950 - total flux cleaned = -0.0101118 Jy ! Component: 1000 - total flux cleaned = -0.0103502 Jy ! Component: 1050 - total flux cleaned = -0.0105266 Jy ! Component: 1100 - total flux cleaned = -0.0107019 Jy ! Component: 1150 - total flux cleaned = -0.0109321 Jy ! Component: 1200 - total flux cleaned = -0.0111587 Jy ! Component: 1250 - total flux cleaned = -0.0114388 Jy ! Component: 1300 - total flux cleaned = -0.0116597 Jy ! Component: 1350 - total flux cleaned = -0.0119324 Jy ! Component: 1400 - total flux cleaned = -0.0122011 Jy ! Component: 1450 - total flux cleaned = -0.012414 Jy ! Component: 1500 - total flux cleaned = -0.0126769 Jy ! Component: 1550 - total flux cleaned = -0.0128331 Jy ! Component: 1600 - total flux cleaned = -0.0131929 Jy ! Component: 1650 - total flux cleaned = -0.013447 Jy ! Component: 1700 - total flux cleaned = -0.0135983 Jy ! Component: 1750 - total flux cleaned = -0.0137978 Jy ! Component: 1800 - total flux cleaned = -0.0140931 Jy ! Component: 1850 - total flux cleaned = -0.0143363 Jy ! Component: 1900 - total flux cleaned = -0.0145286 Jy ! Component: 1950 - total flux cleaned = -0.0146716 Jy ! Component: 2000 - total flux cleaned = -0.014813 Jy ! Total flux subtracted in 2048 components = -0.0150005 Jy ! Clean residual min=-0.002560 max=0.003574 Jy/beam ! Clean residual mean=-0.000111 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 2.26307 Jy keep ! Adding 168 model components to the UV plane model. ! The established model now contains 454 components and 2.26307 Jy wmap "J2038+5119_X_2007_12_05_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.684 x 1.32 at 33.6 degrees (North through East) ! Clean map min=-0.0047673 max=1.5861 Jy/beam ! Writing clean map to FITS file: J2038+5119_X_2007_12_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.58606 invert ! Inverting map ! Your choice of large map pixels excluded 2.07% of the data. ! The x-axis pixel size should ideally be below 0.1808 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000920809 device "J2038+5119_X_2007_12_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2038+5119_X_2007_12_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.17417 0.17417 0.348339 0.696678 1.39336 2.78671 5.57342 11.1468 22.2937 44.5874 89.1748 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.586 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.684 x 1.32 at 33.6 degrees (North through East) ! Clean map min=-0.0047673 max=1.5861 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2038+5119_X_2007_12_05_pus\_map.gif/vgif" ! Attempting to open device: 'J2038+5119_X_2007_12_05_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J2038+5119_X_2007_12_05_pus_uvs.log closed on Wed Sep 8 21:28:09 2010