! Started logfile: J1653+3945_S_2007_12_05_pus_uvs.log on Sat Sep 11 23:22:05 2010 obs J1653+3945_S_2007_12_05_pus_uva.fits ! Reading UV FITS file: J1653+3945_S_2007_12_05_pus_uva.fits ! AN table 1: 68 integrations on 136 of 136 possible baselines. ! AN table 2: 68 integrations on 136 of 136 possible baselines. ! AN table 3: 322 integrations on 136 of 136 possible baselines. ! AN table 4: 64 integrations on 136 of 136 possible baselines. ! AN table 5: 149 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.103555 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1653+3945 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1723 lines of history. ! ! Reading 37800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1079 telescope corrections were flagged in sub-array 1. ! A total of 765 telescope corrections were flagged in sub-array 2. ! A total of 3889 telescope corrections were flagged in sub-array 3. ! A total of 1088 telescope corrections were flagged in sub-array 4. ! A total of 1604 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 1079 telescope corrections were flagged in sub-array 1. ! A total of 765 telescope corrections were flagged in sub-array 2. ! A total of 3889 telescope corrections were flagged in sub-array 3. ! A total of 1088 telescope corrections were flagged in sub-array 4. ! A total of 1604 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 1079 telescope corrections were flagged in sub-array 1. ! A total of 765 telescope corrections were flagged in sub-array 2. ! A total of 3889 telescope corrections were flagged in sub-array 3. ! A total of 1088 telescope corrections were flagged in sub-array 4. ! A total of 1604 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 1079 telescope corrections were flagged in sub-array 1. ! A total of 765 telescope corrections were flagged in sub-array 2. ! A total of 4037 telescope corrections were flagged in sub-array 3. ! A total of 1088 telescope corrections were flagged in sub-array 4. ! A total of 1752 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.728495Jy sigma=0.005100 ! Fit after self-cal, rms=0.637015Jy sigma=0.004274 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=2.474 mas, bpa=28.01 degrees ! Estimated noise=1017.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.366131 Jy ! Component: 100 - total flux cleaned = 0.497755 Jy ! Total flux subtracted in 100 components = 0.497755 Jy ! Clean residual min=-0.023014 max=0.060547 Jy/beam ! Clean residual mean=0.001869 rms=0.008278 Jy/beam ! Combined flux in latest and established models = 0.497755 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.497755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334386Jy sigma=0.002162 ! Fit after self-cal, rms=0.333057Jy sigma=0.002155 ! Inverting map ! Added new window around map position (2, -2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0718516 Jy ! Component: 100 - total flux cleaned = 0.115824 Jy ! Total flux subtracted in 100 components = 0.115824 Jy ! Clean residual min=-0.018970 max=0.038770 Jy/beam ! Clean residual mean=0.001550 rms=0.005743 Jy/beam ! Combined flux in latest and established models = 0.613578 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.613578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311978Jy sigma=0.001863 ! Fit after self-cal, rms=0.311082Jy sigma=0.001859 ! Inverting map ! Added new window around map position (6.5, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420929 Jy ! Component: 100 - total flux cleaned = 0.0701557 Jy ! Total flux subtracted in 100 components = 0.0701557 Jy ! Clean residual min=-0.014248 max=0.026511 Jy/beam ! Clean residual mean=0.001356 rms=0.004424 Jy/beam ! Combined flux in latest and established models = 0.683734 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.683734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302296Jy sigma=0.001718 ! Fit after self-cal, rms=0.301800Jy sigma=0.001714 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.3 mas, bmaj=2.932 mas, bpa=12.6 degrees ! Estimated noise=544.191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479818 Jy ! Component: 100 - total flux cleaned = 0.0802841 Jy ! Component: 150 - total flux cleaned = 0.103969 Jy ! Component: 200 - total flux cleaned = 0.121839 Jy ! Total flux subtracted in 200 components = 0.121839 Jy ! Clean residual min=0.001796 max=0.030514 Jy/beam ! Clean residual mean=0.014054 rms=0.003664 Jy/beam ! Combined flux in latest and established models = 0.805573 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 72 components and 0.805573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294874Jy sigma=0.001568 ! Fit after self-cal, rms=0.294367Jy sigma=0.001562 ! Inverting map ! Added new window around map position (21.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342584 Jy ! Component: 100 - total flux cleaned = 0.0582798 Jy ! Component: 150 - total flux cleaned = 0.0767048 Jy ! Component: 200 - total flux cleaned = 0.0915224 Jy ! Total flux subtracted in 200 components = 0.0915224 Jy ! Clean residual min=0.001141 max=0.022714 Jy/beam ! Clean residual mean=0.010405 rms=0.002706 Jy/beam ! Combined flux in latest and established models = 0.897095 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 111 components and 0.897095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291107Jy sigma=0.001470 ! Fit after self-cal, rms=0.290711Jy sigma=0.001466 ! Inverting map ! Added new window around map position (13.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025311 Jy ! Component: 100 - total flux cleaned = 0.0416483 Jy ! Component: 150 - total flux cleaned = 0.0545511 Jy ! Component: 200 - total flux cleaned = 0.0652709 Jy ! Total flux subtracted in 200 components = 0.0652709 Jy ! Clean residual min=-0.001878 max=0.015739 Jy/beam ! Clean residual mean=0.007726 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.962366 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 145 components and 0.962366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288799Jy sigma=0.001417 ! Fit after self-cal, rms=0.288360Jy sigma=0.001415 ! Inverting map ! Added new window around map position (28, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173226 Jy ! Component: 100 - total flux cleaned = 0.0285984 Jy ! Component: 150 - total flux cleaned = 0.0378421 Jy ! Component: 200 - total flux cleaned = 0.0457693 Jy ! Total flux subtracted in 200 components = 0.0457693 Jy ! Clean residual min=-0.002091 max=0.013465 Jy/beam ! Clean residual mean=0.005920 rms=0.002136 Jy/beam ! Combined flux in latest and established models = 1.00814 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 177 components and 1.00814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287612Jy sigma=0.001390 ! Fit after self-cal, rms=0.287533Jy sigma=0.001388 ! Inverting map ! Added new window around map position (43.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013609 Jy ! Component: 100 - total flux cleaned = 0.0227576 Jy ! Component: 150 - total flux cleaned = 0.0302616 Jy ! Component: 200 - total flux cleaned = 0.0368636 Jy ! Total flux subtracted in 200 components = 0.0368636 Jy ! Clean residual min=-0.003017 max=0.011493 Jy/beam ! Clean residual mean=0.004522 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 1.045 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 215 components and 1.045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287052Jy sigma=0.001371 ! Fit after self-cal, rms=0.286969Jy sigma=0.001371 ! Inverting map ! Added new window around map position (38.5, -54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108424 Jy ! Component: 100 - total flux cleaned = 0.01743 Jy ! Component: 150 - total flux cleaned = 0.0219458 Jy ! Component: 200 - total flux cleaned = 0.0260186 Jy ! Total flux subtracted in 200 components = 0.0260186 Jy ! Clean residual min=-0.004049 max=0.010643 Jy/beam ! Clean residual mean=0.003489 rms=0.001911 Jy/beam ! Combined flux in latest and established models = 1.07102 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 247 components and 1.07102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286652Jy sigma=0.001362 ! Fit after self-cal, rms=0.286572Jy sigma=0.001361 ! Inverting map ! Added new window around map position (24, -54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100169 Jy ! Component: 100 - total flux cleaned = 0.0161528 Jy ! Component: 150 - total flux cleaned = 0.0205847 Jy ! Component: 200 - total flux cleaned = 0.0237825 Jy ! Total flux subtracted in 200 components = 0.0237825 Jy ! Clean residual min=-0.003901 max=0.008144 Jy/beam ! Clean residual mean=0.002548 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 1.0948 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 271 components and 1.0948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286287Jy sigma=0.001353 ! Fit after self-cal, rms=0.286232Jy sigma=0.001353 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HH 1.00* HN 1.00* ! KB 0.93 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.03 ! PT 1.00* SV 1.00* TS 0.91 WZ 1.00* ! ZC 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.15 HH 1.00* HN 1.03 ! KB 1.00* KP 1.00* LA 1.02 MK 0.95 ! NL 0.97 NY 1.00* ON 1.00* OV 0.95 ! PT 1.05 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 186 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.12 HH 0.99 HN 1.01 ! KB 1.00* KP 1.00* LA 0.99 MK 1.00* ! NL 0.96 NY 1.01 ON 1.01 OV 1.00* ! PT 0.98 SV 1.06 TS 1.00* WZ 0.98 ! ZC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* ON 0.00* OV 0.00* ! PT 0.00* SV 0.00* TS 0.00* WZ 0.00* ! ZC 0.00* ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* HH 1.05 HN 1.00* ! KB 0.95 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.98 ON 1.06 OV 1.00* ! PT 1.00* SV 1.05 TS 0.95 WZ 1.03 ! ZC 1.04 ! ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HH 1.00* HN 1.00* ! KB 0.99 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.10 ! PT 1.00* SV 1.00* TS 0.92 WZ 1.00* ! ZC 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HH 1.00* HN 1.02 ! KB 1.00* KP 1.00* LA 1.14 MK 0.97 ! NL 0.98 NY 1.00* ON 1.00* OV 1.01 ! PT 1.05 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 186 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.03 HH 1.09 HN 1.01 ! KB 1.00* KP 1.00* LA 1.07 MK 1.00* ! NL 0.97 NY 1.06 ON 0.95 OV 1.00* ! PT 0.99 SV 1.04 TS 1.00* WZ 0.94 ! ZC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* ON 0.00* OV 0.00* ! PT 0.00* SV 0.00* TS 0.00* WZ 0.00* ! ZC 0.00* ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* HH 1.05 HN 1.00* ! KB 1.02 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00 ON 1.01 OV 1.00* ! PT 1.00* SV 1.05 TS 0.94 WZ 0.95 ! ZC 1.03 ! ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HH 1.00* HN 1.00* ! KB 0.99 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.22 ! PT 1.00* SV 1.00* TS 0.84 WZ 1.00* ! ZC 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.05 HH 1.00* HN 1.03 ! KB 1.00* KP 1.00* LA 1.04 MK 0.98 ! NL 1.06 NY 1.00* ON 1.00* OV 1.00 ! PT 1.11 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 186 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.01 HH 0.92 HN 1.01 ! KB 1.00* KP 1.00* LA 0.98 MK 1.00* ! NL 1.03 NY 0.95 ON 0.96 OV 1.00* ! PT 1.02 SV 0.90 TS 1.00* WZ 1.02 ! ZC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* ON 0.00* OV 0.00* ! PT 0.00* SV 0.00* TS 0.00* WZ 0.00* ! ZC 0.00* ! ! A total of 27 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* HH 1.07 HN 1.00* ! KB 0.99 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.93 ON 1.01 OV 1.00* ! PT 1.00* SV 0.97 TS 0.89 WZ 1.02 ! ZC 1.03 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HH 1.00* HN 1.00* ! KB 0.98 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.09 ! PT 1.00* SV 1.00* TS 0.96 WZ 1.00* ! ZC 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.03 HH 1.00* HN 1.03 ! KB 1.00* KP 1.00* LA 1.05 MK 0.94 ! NL 0.97 NY 1.00* ON 1.00* OV 1.00 ! PT 0.96 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 159 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.97 HH 0.96 HN 1.02 ! KB 1.00* KP 1.00* LA 0.97 MK 1.00* ! NL 0.95 NY 0.94 ON 1.00 OV 1.00* ! PT 0.91 SV 1.00* TS 1.00* WZ 0.98 ! ZC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HH 0.00* HN 0.00* ! KB 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* NY 0.00* ON 0.00* OV 0.00* ! PT 0.00* SV 0.00* TS 0.00* WZ 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* HH 1.02 HN 1.00* ! KB 0.95 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.95 ON 0.96 OV 1.00* ! PT 1.00* SV 1.00* TS 1.05 WZ 1.04 ! ZC 1.05 ! ! ! Fit before self-cal, rms=0.286232Jy sigma=0.001353 ! Fit after self-cal, rms=0.285089Jy sigma=0.001294 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=2.927 mas, bpa=13.92 degrees ! Estimated noise=556.979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000822145 Jy ! Component: 100 - total flux cleaned = -0.00233784 Jy ! Component: 150 - total flux cleaned = -0.00335697 Jy ! Component: 200 - total flux cleaned = -0.00414796 Jy ! Total flux subtracted in 200 components = -0.00414796 Jy ! Clean residual min=-0.004303 max=0.005355 Jy/beam ! Clean residual mean=0.000335 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 1.09065 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 289 components and 1.09065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284942Jy sigma=0.001293 ! Fit after self-cal, rms=0.284971Jy sigma=0.001292 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284971Jy sigma=0.001292 ! Fit after self-cal, rms=0.284725Jy sigma=0.001292 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.25 mas, bmaj=2.924 mas, bpa=13.88 degrees ! Estimated noise=557.288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158182 Jy ! Component: 100 - total flux cleaned = -0.00312897 Jy ! Component: 150 - total flux cleaned = -0.00372154 Jy ! Component: 200 - total flux cleaned = -0.00390627 Jy ! Total flux subtracted in 200 components = -0.00390627 Jy ! Clean residual min=-0.004088 max=0.005242 Jy/beam ! Clean residual mean=0.000286 rms=0.001179 Jy/beam ! Combined flux in latest and established models = 1.08675 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 302 components and 1.08675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284651Jy sigma=0.001291 ! Fit after self-cal, rms=0.284638Jy sigma=0.001291 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (44, 55). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504522 Jy ! Component: 100 - total flux cleaned = 0.00612002 Jy ! Component: 150 - total flux cleaned = 0.00550719 Jy ! Component: 200 - total flux cleaned = 0.00513934 Jy ! Total flux subtracted in 200 components = 0.00513934 Jy ! Clean residual min=-0.004130 max=0.004718 Jy/beam ! Clean residual mean=0.000084 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 1.09188 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 323 components and 1.09188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284518Jy sigma=0.001289 ! Fit after self-cal, rms=0.284530Jy sigma=0.001289 ! Inverting map ! Added new window around map position (27.5, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451268 Jy ! Component: 100 - total flux cleaned = 0.00578579 Jy ! Component: 150 - total flux cleaned = 0.00531131 Jy ! Component: 200 - total flux cleaned = 0.00495809 Jy ! Total flux subtracted in 200 components = 0.00495809 Jy ! Clean residual min=-0.004079 max=0.003467 Jy/beam ! Clean residual mean=-0.000090 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 1.09684 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 348 components and 1.09684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284429Jy sigma=0.001288 ! Fit after self-cal, rms=0.284426Jy sigma=0.001288 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284426Jy sigma=0.001288 ! Fit after self-cal, rms=0.284541Jy sigma=0.001288 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=2.925 mas, bpa=13.74 degrees ! Estimated noise=558.132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027399 Jy ! Component: 100 - total flux cleaned = 0.00312535 Jy ! Component: 150 - total flux cleaned = 0.00321233 Jy ! Component: 200 - total flux cleaned = 0.00305208 Jy ! Total flux subtracted in 200 components = 0.00305208 Jy ! Clean residual min=-0.003804 max=0.003457 Jy/beam ! Clean residual mean=-0.000064 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 1.0999 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 353 components and 1.0999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284480Jy sigma=0.001287 ! Fit after self-cal, rms=0.284472Jy sigma=0.001287 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526384 Jy ! Component: 100 - total flux cleaned = 0.000524581 Jy ! Component: 150 - total flux cleaned = 0.000310041 Jy ! Component: 200 - total flux cleaned = 0.000242504 Jy ! Total flux subtracted in 200 components = 0.000242504 Jy ! Clean residual min=-0.003760 max=0.003469 Jy/beam ! Clean residual mean=-0.000067 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 1.10014 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 360 components and 1.10014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284430Jy sigma=0.001287 ! Fit after self-cal, rms=0.284434Jy sigma=0.001287 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284434Jy sigma=0.001287 ! Fit after self-cal, rms=0.284462Jy sigma=0.001287 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.294 mas, bmaj=8.99 mas, bpa=-68.06 degrees ! Estimated noise=772.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272782 Jy ! Component: 100 - total flux cleaned = 0.00273562 Jy ! Component: 150 - total flux cleaned = 0.00273218 Jy ! Component: 200 - total flux cleaned = 0.00281863 Jy ! Total flux subtracted in 200 components = 0.00281863 Jy ! Clean residual min=-0.006076 max=0.004874 Jy/beam ! Clean residual mean=-0.000262 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 1.10296 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 373 components and 1.10296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284434Jy sigma=0.001287 ! Fit after self-cal, rms=0.284434Jy sigma=0.001287 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568527 Jy ! Component: 100 - total flux cleaned = 0.000567824 Jy ! Component: 150 - total flux cleaned = 0.000489909 Jy ! Component: 200 - total flux cleaned = 0.000489743 Jy ! Total flux subtracted in 200 components = 0.000489743 Jy ! Clean residual min=-0.005963 max=0.004745 Jy/beam ! Clean residual mean=-0.000299 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 1.10345 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 383 components and 1.10345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284423Jy sigma=0.001287 ! Fit after self-cal, rms=0.284430Jy sigma=0.001287 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=2.925 mas, bpa=13.67 degrees ! Estimated noise=558.451 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.251 x 2.925 at 13.67 degrees (North through East) ! Clean map min=-0.0035124 max=0.44469 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.145 mas, bmaj=2.507 mas, bpa=28.85 degrees ! Estimated noise=1062.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.370087 Jy ! Component: 100 - total flux cleaned = 0.51599 Jy ! Component: 150 - total flux cleaned = 0.593401 Jy ! Component: 200 - total flux cleaned = 0.645148 Jy ! Total flux subtracted in 200 components = 0.645148 Jy ! Clean residual min=-0.012301 max=0.029009 Jy/beam ! Clean residual mean=0.001392 rms=0.004989 Jy/beam ! Combined flux in latest and established models = 0.645148 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.645148 Jy ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=2.925 mas, bpa=13.67 degrees ! Estimated noise=558.451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602128 Jy ! Component: 100 - total flux cleaned = 0.104717 Jy ! Component: 150 - total flux cleaned = 0.14123 Jy ! Component: 200 - total flux cleaned = 0.172053 Jy ! Total flux subtracted in 200 components = 0.172053 Jy ! Clean residual min=0.003250 max=0.021129 Jy/beam ! Clean residual mean=0.011455 rms=0.002685 Jy/beam ! Combined flux in latest and established models = 0.817201 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 96 components and 0.817201 Jy ! Inverting map ! Added new window around map position (3.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271054 Jy ! Component: 100 - total flux cleaned = 0.0506175 Jy ! Component: 150 - total flux cleaned = 0.0713909 Jy ! Component: 200 - total flux cleaned = 0.0898698 Jy ! Total flux subtracted in 200 components = 0.0898698 Jy ! Clean residual min=0.001444 max=0.013467 Jy/beam ! Clean residual mean=0.007752 rms=0.001798 Jy/beam ! Combined flux in latest and established models = 0.907071 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 158 components and 0.907071 Jy ! Inverting map ! Added new window around map position (27, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169603 Jy ! Component: 100 - total flux cleaned = 0.0319948 Jy ! Component: 150 - total flux cleaned = 0.0456072 Jy ! Component: 200 - total flux cleaned = 0.0579634 Jy ! Total flux subtracted in 200 components = 0.0579634 Jy ! Clean residual min=0.000313 max=0.009628 Jy/beam ! Clean residual mean=0.005413 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.965034 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 223 components and 0.965035 Jy ! Inverting map ! Added new window around map position (16, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115985 Jy ! Component: 100 - total flux cleaned = 0.0219094 Jy ! Component: 150 - total flux cleaned = 0.0313128 Jy ! Component: 200 - total flux cleaned = 0.0399004 Jy ! Total flux subtracted in 200 components = 0.0399004 Jy ! Clean residual min=-0.000510 max=0.007331 Jy/beam ! Clean residual mean=0.003819 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 1.00494 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 274 components and 1.00494 Jy ! Inverting map ! Added new window around map position (63.5, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0083577 Jy ! Component: 100 - total flux cleaned = 0.0156347 Jy ! Component: 150 - total flux cleaned = 0.0222932 Jy ! Component: 200 - total flux cleaned = 0.0284047 Jy ! Total flux subtracted in 200 components = 0.0284047 Jy ! Clean residual min=-0.000825 max=0.005616 Jy/beam ! Clean residual mean=0.002718 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 1.03334 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 327 components and 1.03334 Jy ! Inverting map ! Added new window around map position (48.5, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00609871 Jy ! Component: 100 - total flux cleaned = 0.0113309 Jy ! Component: 150 - total flux cleaned = 0.0161353 Jy ! Component: 200 - total flux cleaned = 0.0205526 Jy ! Total flux subtracted in 200 components = 0.0205526 Jy ! Clean residual min=-0.001438 max=0.004508 Jy/beam ! Clean residual mean=0.001921 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 1.05389 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 359 components and 1.05389 Jy ! Inverting map ! Added new window around map position (0.5, 35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045996 Jy ! Component: 100 - total flux cleaned = 0.00844492 Jy ! Component: 150 - total flux cleaned = 0.0119614 Jy ! Component: 200 - total flux cleaned = 0.015195 Jy ! Total flux subtracted in 200 components = 0.015195 Jy ! Clean residual min=-0.001955 max=0.004040 Jy/beam ! Clean residual mean=0.001322 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 1.06909 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 396 components and 1.06909 Jy ! Inverting map ! Added new window around map position (33.5, 53). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412537 Jy ! Component: 100 - total flux cleaned = 0.00708845 Jy ! Component: 150 - total flux cleaned = 0.00974247 Jy ! Component: 200 - total flux cleaned = 0.0121641 Jy ! Total flux subtracted in 200 components = 0.0121641 Jy ! Clean residual min=-0.002451 max=0.003309 Jy/beam ! Clean residual mean=0.000841 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 1.08125 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 427 components and 1.08125 Jy ! Inverting map ! Added new window around map position (29, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310566 Jy ! Component: 100 - total flux cleaned = 0.0053098 Jy ! Component: 150 - total flux cleaned = 0.00728284 Jy ! Component: 200 - total flux cleaned = 0.00907485 Jy ! Total flux subtracted in 200 components = 0.00907485 Jy ! Clean residual min=-0.002709 max=0.003031 Jy/beam ! Clean residual mean=0.000499 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 1.09033 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 451 components and 1.09033 Jy ! Inverting map ! Added new window around map position (-30.5, -50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028319 Jy ! Component: 100 - total flux cleaned = 0.00453714 Jy ! Component: 150 - total flux cleaned = 0.00603743 Jy ! Component: 200 - total flux cleaned = 0.0071399 Jy ! Total flux subtracted in 200 components = 0.0071399 Jy ! Clean residual min=-0.002893 max=0.002279 Jy/beam ! Clean residual mean=0.000218 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 1.09747 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 479 components and 1.09747 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.294 mas, bmaj=8.99 mas, bpa=-68.06 degrees ! Estimated noise=772.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341715 Jy ! Component: 100 - total flux cleaned = 0.00578483 Jy ! Component: 150 - total flux cleaned = 0.00688572 Jy ! Component: 200 - total flux cleaned = 0.00774752 Jy ! Total flux subtracted in 200 components = 0.00774752 Jy ! Clean residual min=-0.004763 max=0.003237 Jy/beam ! Clean residual mean=-0.000225 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 1.10521 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406496 Jy ! Component: 100 - total flux cleaned = 0.000671547 Jy ! Component: 150 - total flux cleaned = 0.0009167 Jy ! Component: 200 - total flux cleaned = 0.00114337 Jy ! Total flux subtracted in 200 components = 0.00114337 Jy ! Clean residual min=-0.004870 max=0.003108 Jy/beam ! Clean residual mean=-0.000356 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 1.10636 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 510 components and 1.10636 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=2.925 mas, bpa=13.67 degrees ! Estimated noise=558.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.29447e-05 Jy ! Component: 100 - total flux cleaned = -0.000374046 Jy ! Component: 150 - total flux cleaned = -0.000636571 Jy ! Component: 200 - total flux cleaned = -0.000676589 Jy ! Total flux subtracted in 200 components = -0.000676589 Jy ! Clean residual min=-0.003130 max=0.001981 Jy/beam ! Clean residual mean=-0.000079 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 1.10568 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 529 components and 1.10568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283994Jy sigma=0.001283 ! Fit after self-cal, rms=0.283929Jy sigma=0.001282 wmodel J1653+3945_S_2007_12_05_pus_map.mod ! Writing 529 model components to file: J1653+3945_S_2007_12_05_pus_map.mod wobs J1653+3945_S_2007_12_05_pus_uvs.fits ! Writing UV FITS file: J1653+3945_S_2007_12_05_pus_uvs.fits wwins J1653+3945_S_2007_12_05_pus_map.win ! wwins: Wrote 20 windows to J1653+3945_S_2007_12_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131729 Jy ! Component: 100 - total flux cleaned = -0.00234536 Jy ! Component: 150 - total flux cleaned = -0.00280285 Jy ! Component: 200 - total flux cleaned = -0.00299986 Jy ! Component: 250 - total flux cleaned = -0.00311364 Jy ! Component: 300 - total flux cleaned = -0.00318785 Jy ! Component: 350 - total flux cleaned = -0.00329574 Jy ! Component: 400 - total flux cleaned = -0.00336554 Jy ! Component: 450 - total flux cleaned = -0.00343389 Jy ! Component: 500 - total flux cleaned = -0.00350096 Jy ! Component: 550 - total flux cleaned = -0.00356647 Jy ! Component: 600 - total flux cleaned = -0.00359877 Jy ! Component: 650 - total flux cleaned = -0.00369365 Jy ! Component: 700 - total flux cleaned = -0.00372464 Jy ! Component: 750 - total flux cleaned = -0.00378558 Jy ! Component: 800 - total flux cleaned = -0.00378557 Jy ! Component: 850 - total flux cleaned = -0.00381516 Jy ! Component: 900 - total flux cleaned = -0.0038151 Jy ! Component: 950 - total flux cleaned = -0.00378649 Jy ! Component: 1000 - total flux cleaned = -0.00381474 Jy ! Component: 1050 - total flux cleaned = -0.00378657 Jy ! Component: 1100 - total flux cleaned = -0.00378661 Jy ! Component: 1150 - total flux cleaned = -0.00375919 Jy ! Component: 1200 - total flux cleaned = -0.00378646 Jy ! Component: 1250 - total flux cleaned = -0.00378638 Jy ! Component: 1300 - total flux cleaned = -0.00381289 Jy ! Component: 1350 - total flux cleaned = -0.00378631 Jy ! Component: 1400 - total flux cleaned = -0.00378625 Jy ! Component: 1450 - total flux cleaned = -0.00378628 Jy ! Component: 1500 - total flux cleaned = -0.00378629 Jy ! Component: 1550 - total flux cleaned = -0.00378623 Jy ! Component: 1600 - total flux cleaned = -0.00378623 Jy ! Component: 1650 - total flux cleaned = -0.00378613 Jy ! Component: 1700 - total flux cleaned = -0.00378598 Jy ! Component: 1750 - total flux cleaned = -0.00376136 Jy ! Component: 1800 - total flux cleaned = -0.00378583 Jy ! Component: 1850 - total flux cleaned = -0.00376153 Jy ! Component: 1900 - total flux cleaned = -0.00376168 Jy ! Component: 1950 - total flux cleaned = -0.00376181 Jy ! Component: 2000 - total flux cleaned = -0.00376179 Jy ! Total flux subtracted in 2048 components = -0.00376177 Jy ! Clean residual min=-0.001366 max=0.001626 Jy/beam ! Clean residual mean=0.000046 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 1.10192 Jy keep ! Adding 152 model components to the UV plane model. ! The established model now contains 681 components and 1.10192 Jy wmap "J1653+3945_S_2007_12_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.251 x 2.925 at 13.67 degrees (North through East) ! Clean map min=-0.0026178 max=0.44489 Jy/beam ! Writing clean map to FITS file: J1653+3945_S_2007_12_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.44489 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000438894 device "J1653+3945_S_2007_12_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1653+3945_S_2007_12_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.295956 0.295956 0.591913 1.18383 2.36765 4.7353 9.4706 18.9412 37.8824 75.7648 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.444 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.251 x 2.925 at 13.67 degrees (North through East) ! Clean map min=-0.0026178 max=0.44489 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1653+3945_S_2007_12_05_pus\_map.gif/vgif" ! Attempting to open device: 'J1653+3945_S_2007_12_05_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1653+3945_S_2007_12_05_pus_uvs.log closed on Sat Sep 11 23:22:23 2010