! Started logfile: J0824+5552_X_2007_12_05_pus_uvs.log on Wed Sep 8 21:18:53 2010 obs J0824+5552_X_2007_12_05_pus_uva.fits ! Reading UV FITS file: J0824+5552_X_2007_12_05_pus_uva.fits ! AN table 1: 103 integrations on 136 of 136 possible baselines. ! AN table 2: 62 integrations on 136 of 136 possible baselines. ! AN table 3: 54 integrations on 136 of 136 possible baselines. ! AN table 4: 31 integrations on 136 of 136 possible baselines. ! AN table 5: 252 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.0932593 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0824+5552 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1501 lines of history. ! ! Reading 25468 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1332 telescope corrections were flagged in sub-array 1. ! A total of 661 telescope corrections were flagged in sub-array 2. ! A total of 585 telescope corrections were flagged in sub-array 3. ! A total of 449 telescope corrections were flagged in sub-array 4. ! A total of 3321 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 1332 telescope corrections were flagged in sub-array 1. ! A total of 661 telescope corrections were flagged in sub-array 2. ! A total of 585 telescope corrections were flagged in sub-array 3. ! A total of 449 telescope corrections were flagged in sub-array 4. ! A total of 3321 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 1332 telescope corrections were flagged in sub-array 1. ! A total of 661 telescope corrections were flagged in sub-array 2. ! A total of 585 telescope corrections were flagged in sub-array 3. ! A total of 449 telescope corrections were flagged in sub-array 4. ! A total of 3321 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 1383 telescope corrections were flagged in sub-array 1. ! A total of 753 telescope corrections were flagged in sub-array 2. ! A total of 585 telescope corrections were flagged in sub-array 3. ! A total of 449 telescope corrections were flagged in sub-array 4. ! A total of 3378 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.697048Jy sigma=0.006410 ! Fit after self-cal, rms=0.599391Jy sigma=0.005457 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.51% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=0.6091 mas, bmaj=0.7465 mas, bpa=51.49 degrees ! Estimated noise=951.646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.328344 Jy ! Component: 100 - total flux cleaned = 0.460641 Jy ! Total flux subtracted in 100 components = 0.460641 Jy ! Clean residual min=-0.015571 max=0.060002 Jy/beam ! Clean residual mean=0.000607 rms=0.005238 Jy/beam ! Combined flux in latest and established models = 0.460641 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.460641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225952Jy sigma=0.001837 ! Fit after self-cal, rms=0.224548Jy sigma=0.001828 ! Inverting map ! Your choice of large map pixels excluded 2.51% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.070696 Jy ! Component: 100 - total flux cleaned = 0.113182 Jy ! Total flux subtracted in 100 components = 0.113182 Jy ! Clean residual min=-0.010155 max=0.036198 Jy/beam ! Clean residual mean=0.000267 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 0.573824 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.573824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193218Jy sigma=0.001416 ! Fit after self-cal, rms=0.193112Jy sigma=0.001414 ! Inverting map ! Your choice of large map pixels excluded 2.51% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Added new window around map position (1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.03368 Jy ! Component: 100 - total flux cleaned = 0.0543819 Jy ! Total flux subtracted in 100 components = 0.0543819 Jy ! Clean residual min=-0.008438 max=0.020439 Jy/beam ! Clean residual mean=0.000104 rms=0.002255 Jy/beam ! Combined flux in latest and established models = 0.628206 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.628206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186322Jy sigma=0.001310 ! Fit after self-cal, rms=0.186022Jy sigma=0.001307 ! Inverting map ! Your choice of large map pixels excluded 2.51% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Added new window around map position (-1.2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018972 Jy ! Component: 100 - total flux cleaned = 0.0315989 Jy ! Total flux subtracted in 100 components = 0.0315989 Jy ! Clean residual min=-0.007469 max=0.011829 Jy/beam ! Clean residual mean=0.000009 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.659804 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.659804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184428Jy sigma=0.001277 ! Fit after self-cal, rms=0.184436Jy sigma=0.001277 ! Inverting map ! Your choice of large map pixels excluded 2.51% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Added new window around map position (2.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118549 Jy ! Component: 100 - total flux cleaned = 0.0196609 Jy ! Total flux subtracted in 100 components = 0.0196609 Jy ! Clean residual min=-0.007259 max=0.007959 Jy/beam ! Clean residual mean=-0.000046 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.679465 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.679465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183903Jy sigma=0.001266 ! Fit after self-cal, rms=0.183880Jy sigma=0.001266 ! Inverting map ! Your choice of large map pixels excluded 2.51% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.51% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=0.7814 mas, bmaj=1.052 mas, bpa=26 degrees ! Estimated noise=527.936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645097 Jy ! Component: 100 - total flux cleaned = 0.0066248 Jy ! Component: 150 - total flux cleaned = 0.00663264 Jy ! Component: 200 - total flux cleaned = 0.00663813 Jy ! Total flux subtracted in 200 components = 0.00663813 Jy ! Clean residual min=-0.011024 max=0.009068 Jy/beam ! Clean residual mean=-0.000498 rms=0.002500 Jy/beam ! Combined flux in latest and established models = 0.686103 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.686103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183485Jy sigma=0.001263 ! Fit after self-cal, rms=0.183435Jy sigma=0.001262 ! Inverting map ! Your choice of large map pixels excluded 2.51% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HH 1.00* HN 1.22 ! KB 0.81 KP 0.96 LA 0.95 MK 1.00* ! NL 1.00 NY 1.00* ON 1.00* OV 0.95 ! PT 0.93 SV 1.06 TS 1.07 WZ 1.00* ! ZC 0.95 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HH 1.00* HN 1.14 ! KB 1.00* KP 0.99 LA 0.98 MK 1.00* ! NL 1.02 NY 1.00* ON 1.00* OV 0.94 ! PT 0.98 SV 1.00* TS 0.99 WZ 1.00* ! ZC 0.96 ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.00* HH 1.00* HN 0.93 ! KB 1.00* KP 1.00 LA 1.01 MK 0.93 ! NL 1.11 NY 1.00* ON 1.00* OV 0.97 ! PT 1.07 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.91 FD 0.96 HH 1.00* HN 1.00* ! KB 1.00* KP 1.02 LA 0.92 MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.01 ! PT 0.94 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 219 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.90 FD 1.05 HH 1.00* HN 1.06 ! KB 0.96 KP 1.11 LA 0.98 MK 1.00* ! NL 1.03 NY 0.89 ON 1.00* OV 1.07 ! PT 1.03 SV 1.00* TS 1.17 WZ 1.00* ! ZC 1.00* ! ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HH 1.00* HN 1.16 ! KB 0.81 KP 0.93 LA 0.93 MK 1.00* ! NL 0.99 NY 1.00* ON 1.00* OV 0.93 ! PT 0.98 SV 1.07 TS 1.09 WZ 1.00* ! ZC 1.07 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HH 1.00* HN 1.16 ! KB 1.00* KP 0.96 LA 0.94 MK 1.00* ! NL 0.97 NY 1.00* ON 1.00* OV 0.94 ! PT 1.01 SV 1.00* TS 1.02 WZ 1.00* ! ZC 1.01 ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00* HH 1.00* HN 1.05 ! KB 1.00* KP 0.97 LA 1.01 MK 0.98 ! NL 1.06 NY 1.00* ON 1.00* OV 0.94 ! PT 1.10 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.98 HH 1.00* HN 1.00* ! KB 1.00* KP 0.92 LA 0.95 MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 0.98 ! PT 0.97 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 219 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 1.05 HH 1.00* HN 1.08 ! KB 0.98 KP 1.05 LA 0.98 MK 1.00* ! NL 1.01 NY 0.94 ON 1.00* OV 1.03 ! PT 1.07 SV 1.00* TS 1.19 WZ 1.00* ! ZC 1.00* ! ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HH 1.00* HN 1.17 ! KB 0.84 KP 0.97 LA 0.98 MK 1.00* ! NL 0.98 NY 1.00* ON 1.00* OV 0.99 ! PT 1.00 SV 1.42 TS 1.09 WZ 1.00* ! ZC 0.80 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HH 1.00* HN 1.10 ! KB 1.00* KP 1.01 LA 1.00 MK 1.00* ! NL 0.99 NY 1.00* ON 1.00* OV 0.98 ! PT 1.02 SV 1.00* TS 0.98 WZ 1.00* ! ZC 1.02 ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00* HH 1.00* HN 0.94 ! KB 1.00* KP 1.01 LA 1.02 MK 0.97 ! NL 1.09 NY 1.00* ON 1.00* OV 1.03 ! PT 1.12 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 0.99 HH 1.00* HN 1.00* ! KB 1.00* KP 1.03 LA 0.98 MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.04 ! PT 0.99 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 219 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.93 FD 1.05 HH 1.00* HN 1.07 ! KB 1.01 KP 1.10 LA 1.01 MK 1.00* ! NL 1.02 NY 0.93 ON 1.00* OV 1.11 ! PT 1.10 SV 1.00* TS 1.18 WZ 1.00* ! ZC 1.00* ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HH 1.00* HN 1.15 ! KB 1.00* KP 0.98 LA 0.95 MK 1.00* ! NL 1.02 NY 1.00* ON 1.00* OV 0.98 ! PT 0.99 SV 1.00* TS 1.06 WZ 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HH 1.00* HN 1.15 ! KB 1.00* KP 1.01 LA 0.97 MK 1.00* ! NL 1.03 NY 1.00* ON 1.00* OV 0.99 ! PT 1.01 SV 1.00* TS 0.96 WZ 1.00* ! ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00* HH 1.00* HN 0.99 ! KB 1.00* KP 0.98 LA 1.08 MK 0.99 ! NL 1.09 NY 1.00* ON 1.00* OV 1.02 ! PT 1.12 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 1.00 HH 1.00* HN 1.00* ! KB 1.00* KP 1.02 LA 0.97 MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.00 ! PT 0.99 SV 1.00* TS 1.00* WZ 1.00* ! ZC 1.00* ! ! A total of 162 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 1.03 HH 1.00* HN 1.07 ! KB 0.98 KP 1.09 LA 1.02 MK 1.00* ! NL 1.04 NY 0.95 ON 1.00* OV 1.04 ! PT 1.10 SV 1.00* TS 1.20 WZ 1.00* ! ZC 1.00* ! ! ! Fit before self-cal, rms=0.183435Jy sigma=0.001262 ! Fit after self-cal, rms=0.185316Jy sigma=0.001211 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=0.7886 mas, bmaj=1.056 mas, bpa=29.23 degrees ! Estimated noise=543.011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.6, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00716069 Jy ! Component: 100 - total flux cleaned = 0.00971511 Jy ! Component: 150 - total flux cleaned = 0.0117995 Jy ! Component: 200 - total flux cleaned = 0.0135773 Jy ! Total flux subtracted in 200 components = 0.0135773 Jy ! Clean residual min=-0.003879 max=0.006314 Jy/beam ! Clean residual mean=0.000045 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.699681 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 77 components and 0.699681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184971Jy sigma=0.001207 ! Fit after self-cal, rms=0.185019Jy sigma=0.001207 ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Added new window around map position (6.2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643007 Jy ! Component: 100 - total flux cleaned = 0.00975083 Jy ! Component: 150 - total flux cleaned = 0.0112973 Jy ! Component: 200 - total flux cleaned = 0.0126479 Jy ! Total flux subtracted in 200 components = 0.0126479 Jy ! Clean residual min=-0.003825 max=0.004644 Jy/beam ! Clean residual mean=-0.000111 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.712329 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 97 components and 0.712328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184778Jy sigma=0.001204 ! Fit after self-cal, rms=0.184749Jy sigma=0.001203 ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184749Jy sigma=0.001203 ! Fit after self-cal, rms=0.184363Jy sigma=0.001198 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=0.7902 mas, bmaj=1.058 mas, bpa=29.55 degrees ! Estimated noise=543.096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149263 Jy ! Component: 100 - total flux cleaned = 0.00255064 Jy ! Component: 150 - total flux cleaned = 0.0033618 Jy ! Component: 200 - total flux cleaned = 0.00372553 Jy ! Total flux subtracted in 200 components = 0.00372553 Jy ! Clean residual min=-0.003428 max=0.003936 Jy/beam ! Clean residual mean=0.000039 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.716054 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 111 components and 0.716054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184295Jy sigma=0.001198 ! Fit after self-cal, rms=0.184288Jy sigma=0.001198 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381945 Jy ! Component: 100 - total flux cleaned = 0.00596617 Jy ! Component: 150 - total flux cleaned = 0.00663882 Jy ! Component: 200 - total flux cleaned = 0.00704912 Jy ! Total flux subtracted in 200 components = 0.00704912 Jy ! Clean residual min=-0.003168 max=0.003438 Jy/beam ! Clean residual mean=-0.000042 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.723103 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 128 components and 0.723103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184198Jy sigma=0.001197 ! Fit after self-cal, rms=0.184192Jy sigma=0.001196 ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Added new window around map position (9.8, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334426 Jy ! Component: 100 - total flux cleaned = 0.00491319 Jy ! Component: 150 - total flux cleaned = 0.00564572 Jy ! Component: 200 - total flux cleaned = 0.0061043 Jy ! Total flux subtracted in 200 components = 0.0061043 Jy ! Clean residual min=-0.002936 max=0.002714 Jy/beam ! Clean residual mean=-0.000113 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.729207 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 148 components and 0.729207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184107Jy sigma=0.001196 ! Fit after self-cal, rms=0.184097Jy sigma=0.001196 ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184097Jy sigma=0.001196 ! Fit after self-cal, rms=0.184208Jy sigma=0.001195 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=0.7912 mas, bmaj=1.059 mas, bpa=29.94 degrees ! Estimated noise=543.005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127719 Jy ! Component: 100 - total flux cleaned = 0.00243474 Jy ! Component: 150 - total flux cleaned = 0.00327237 Jy ! Component: 200 - total flux cleaned = 0.00387687 Jy ! Total flux subtracted in 200 components = 0.00387687 Jy ! Clean residual min=-0.002667 max=0.002730 Jy/beam ! Clean residual mean=-0.000004 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.733084 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 157 components and 0.733084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184168Jy sigma=0.001195 ! Fit after self-cal, rms=0.184165Jy sigma=0.001195 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000459272 Jy ! Component: 100 - total flux cleaned = 0.000792927 Jy ! Component: 150 - total flux cleaned = 0.00106425 Jy ! Component: 200 - total flux cleaned = 0.00127952 Jy ! Total flux subtracted in 200 components = 0.00127952 Jy ! Clean residual min=-0.002640 max=0.002676 Jy/beam ! Clean residual mean=-0.000019 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.734364 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 161 components and 0.734364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184143Jy sigma=0.001195 ! Fit after self-cal, rms=0.184140Jy sigma=0.001195 ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184140Jy sigma=0.001195 ! Fit after self-cal, rms=0.184191Jy sigma=0.001195 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=2.744 mas, bmaj=3.119 mas, bpa=-23.42 degrees ! Estimated noise=666.915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185407 Jy ! Component: 100 - total flux cleaned = 0.00285425 Jy ! Component: 150 - total flux cleaned = 0.0037155 Jy ! Component: 200 - total flux cleaned = 0.00439851 Jy ! Total flux subtracted in 200 components = 0.00439851 Jy ! Clean residual min=-0.002789 max=0.003120 Jy/beam ! Clean residual mean=-0.000031 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.738762 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 178 components and 0.738762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184178Jy sigma=0.001195 ! Fit after self-cal, rms=0.184174Jy sigma=0.001195 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449197 Jy ! Component: 100 - total flux cleaned = 0.00091539 Jy ! Component: 150 - total flux cleaned = 0.0012309 Jy ! Component: 200 - total flux cleaned = 0.00137495 Jy ! Total flux subtracted in 200 components = 0.00137495 Jy ! Clean residual min=-0.002724 max=0.003081 Jy/beam ! Clean residual mean=-0.000062 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.740137 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 181 components and 0.740137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184171Jy sigma=0.001194 ! Fit after self-cal, rms=0.184169Jy sigma=0.001194 ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=0.791 mas, bmaj=1.059 mas, bpa=30.16 degrees ! Estimated noise=542.711 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.791 x 1.059 at 30.16 degrees (North through East) ! Clean map min=-0.0022653 max=0.40463 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=0.6046 mas, bmaj=0.7488 mas, bpa=54.89 degrees ! Estimated noise=990.812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.329373 Jy ! Component: 100 - total flux cleaned = 0.464179 Jy ! Component: 150 - total flux cleaned = 0.533417 Jy ! Component: 200 - total flux cleaned = 0.575963 Jy ! Total flux subtracted in 200 components = 0.575963 Jy ! Clean residual min=-0.007661 max=0.022607 Jy/beam ! Clean residual mean=0.000415 rms=0.002418 Jy/beam ! Combined flux in latest and established models = 0.575963 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.575962 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=0.791 mas, bmaj=1.059 mas, bpa=30.16 degrees ! Estimated noise=542.711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451229 Jy ! Component: 100 - total flux cleaned = 0.0706794 Jy ! Component: 150 - total flux cleaned = 0.0863198 Jy ! Component: 200 - total flux cleaned = 0.0974698 Jy ! Total flux subtracted in 200 components = 0.0974698 Jy ! Clean residual min=-0.003546 max=0.007197 Jy/beam ! Clean residual mean=0.000745 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.673432 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 70 components and 0.673432 Jy ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Added new window around map position (2.2, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887857 Jy ! Component: 100 - total flux cleaned = 0.0161121 Jy ! Component: 150 - total flux cleaned = 0.0222756 Jy ! Component: 200 - total flux cleaned = 0.0276147 Jy ! Total flux subtracted in 200 components = 0.0276147 Jy ! Clean residual min=-0.002628 max=0.004169 Jy/beam ! Clean residual mean=0.000418 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.701047 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 111 components and 0.701047 Jy ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Added new window around map position (22.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048558 Jy ! Component: 100 - total flux cleaned = 0.00902954 Jy ! Component: 150 - total flux cleaned = 0.012725 Jy ! Component: 200 - total flux cleaned = 0.0160138 Jy ! Total flux subtracted in 200 components = 0.0160138 Jy ! Clean residual min=-0.002366 max=0.003066 Jy/beam ! Clean residual mean=0.000235 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.717061 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 130 components and 0.717061 Jy ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=2.744 mas, bmaj=3.119 mas, bpa=-23.42 degrees ! Estimated noise=666.915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479933 Jy ! Component: 100 - total flux cleaned = 0.00852237 Jy ! Component: 150 - total flux cleaned = 0.0116095 Jy ! Component: 200 - total flux cleaned = 0.014197 Jy ! Total flux subtracted in 200 components = 0.014197 Jy ! Clean residual min=-0.002527 max=0.002848 Jy/beam ! Clean residual mean=0.000147 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.731258 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218203 Jy ! Component: 100 - total flux cleaned = 0.00402605 Jy ! Component: 150 - total flux cleaned = 0.00558976 Jy ! Component: 200 - total flux cleaned = 0.00691661 Jy ! Total flux subtracted in 200 components = 0.00691661 Jy ! Clean residual min=-0.002542 max=0.002403 Jy/beam ! Clean residual mean=-0.000013 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.738174 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 191 components and 0.738174 Jy ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! Estimated beam: bmin=0.791 mas, bmaj=1.059 mas, bpa=30.16 degrees ! Estimated noise=542.711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104615 Jy ! Component: 100 - total flux cleaned = 0.00177512 Jy ! Component: 150 - total flux cleaned = 0.00228894 Jy ! Component: 200 - total flux cleaned = 0.00262471 Jy ! Total flux subtracted in 200 components = 0.00262471 Jy ! Clean residual min=-0.002764 max=0.002451 Jy/beam ! Clean residual mean=-0.000036 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.740799 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 209 components and 0.740799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184151Jy sigma=0.001194 ! Fit after self-cal, rms=0.184107Jy sigma=0.001194 wmodel J0824+5552_X_2007_12_05_pus_map.mod ! Writing 209 model components to file: J0824+5552_X_2007_12_05_pus_map.mod wobs J0824+5552_X_2007_12_05_pus_uvs.fits ! Writing UV FITS file: J0824+5552_X_2007_12_05_pus_uvs.fits wwins J0824+5552_X_2007_12_05_pus_map.win ! wwins: Wrote 10 windows to J0824+5552_X_2007_12_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000780185 Jy ! Component: 100 - total flux cleaned = -0.000826238 Jy ! Component: 150 - total flux cleaned = -0.000908244 Jy ! Component: 200 - total flux cleaned = -0.000986926 Jy ! Component: 250 - total flux cleaned = -0.00106312 Jy ! Component: 300 - total flux cleaned = -0.00117426 Jy ! Component: 350 - total flux cleaned = -0.00117382 Jy ! Component: 400 - total flux cleaned = -0.00124559 Jy ! Component: 450 - total flux cleaned = -0.00131577 Jy ! Component: 500 - total flux cleaned = -0.00138439 Jy ! Component: 550 - total flux cleaned = -0.00145239 Jy ! Component: 600 - total flux cleaned = -0.00148595 Jy ! Component: 650 - total flux cleaned = -0.00151934 Jy ! Component: 700 - total flux cleaned = -0.00164993 Jy ! Component: 750 - total flux cleaned = -0.00171421 Jy ! Component: 800 - total flux cleaned = -0.00174581 Jy ! Component: 850 - total flux cleaned = -0.00177743 Jy ! Component: 900 - total flux cleaned = -0.00183947 Jy ! Component: 950 - total flux cleaned = -0.00193139 Jy ! Component: 1000 - total flux cleaned = -0.00202211 Jy ! Component: 1050 - total flux cleaned = -0.0020521 Jy ! Component: 1100 - total flux cleaned = -0.00220022 Jy ! Component: 1150 - total flux cleaned = -0.00225893 Jy ! Component: 1200 - total flux cleaned = -0.00237488 Jy ! Component: 1250 - total flux cleaned = -0.0024897 Jy ! Component: 1300 - total flux cleaned = -0.00248957 Jy ! Component: 1350 - total flux cleaned = -0.00260226 Jy ! Component: 1400 - total flux cleaned = -0.00265789 Jy ! Component: 1450 - total flux cleaned = -0.00271319 Jy ! Component: 1500 - total flux cleaned = -0.00274056 Jy ! Component: 1550 - total flux cleaned = -0.00282184 Jy ! Component: 1600 - total flux cleaned = -0.00276789 Jy ! Component: 1650 - total flux cleaned = -0.00287478 Jy ! Component: 1700 - total flux cleaned = -0.00290104 Jy ! Component: 1750 - total flux cleaned = -0.00292701 Jy ! Component: 1800 - total flux cleaned = -0.00287453 Jy ! Component: 1850 - total flux cleaned = -0.00292653 Jy ! Component: 1900 - total flux cleaned = -0.00295245 Jy ! Component: 1950 - total flux cleaned = -0.00295222 Jy ! Component: 2000 - total flux cleaned = -0.0029268 Jy ! Total flux subtracted in 2048 components = -0.00297712 Jy ! Clean residual min=-0.001645 max=0.001400 Jy/beam ! Clean residual mean=-0.000005 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.737822 Jy keep ! Adding 152 model components to the UV plane model. ! The established model now contains 361 components and 0.737822 Jy wmap "J0824+5552_X_2007_12_05_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.791 x 1.059 at 30.16 degrees (North through East) ! Clean map min=-0.002628 max=0.40542 Jy/beam ! Writing clean map to FITS file: J0824+5552_X_2007_12_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.405417 invert ! Inverting map ! Your choice of large map pixels excluded 2.66% of the data. ! The x-axis pixel size should ideally be below 0.1838 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00044785 device "J0824+5552_X_2007_12_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0824+5552_X_2007_12_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.331399 0.331399 0.662798 1.3256 2.65119 5.30239 10.6048 21.2096 42.4191 84.8382 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.405 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.791 x 1.059 at 30.16 degrees (North through East) ! Clean map min=-0.002628 max=0.40542 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0824+5552_X_2007_12_05_pus\_map.gif/vgif" ! Attempting to open device: 'J0824+5552_X_2007_12_05_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0824+5552_X_2007_12_05_pus_uvs.log closed on Wed Sep 8 21:19:03 2010