! Started logfile: J0108+0135_X_2007_12_05_pus_uvs.log on Wed Sep 8 21:14:22 2010 obs J0108+0135_X_2007_12_05_pus_uva.fits ! Reading UV FITS file: J0108+0135_X_2007_12_05_pus_uva.fits ! AN table 1: 98 integrations on 136 of 136 possible baselines. ! AN table 2: 162 integrations on 136 of 136 possible baselines. ! AN table 3: 121 integrations on 136 of 136 possible baselines. ! AN table 4: 129 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.177754 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0108+0135 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1501 lines of history. ! ! Reading 49316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 995 telescope corrections were flagged in sub-array 1. ! A total of 2094 telescope corrections were flagged in sub-array 2. ! A total of 1394 telescope corrections were flagged in sub-array 3. ! A total of 732 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 995 telescope corrections were flagged in sub-array 1. ! A total of 2094 telescope corrections were flagged in sub-array 2. ! A total of 1394 telescope corrections were flagged in sub-array 3. ! A total of 732 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 995 telescope corrections were flagged in sub-array 1. ! A total of 2094 telescope corrections were flagged in sub-array 2. ! A total of 1394 telescope corrections were flagged in sub-array 3. ! A total of 732 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1029 telescope corrections were flagged in sub-array 1. ! A total of 2126 telescope corrections were flagged in sub-array 2. ! A total of 1426 telescope corrections were flagged in sub-array 3. ! A total of 732 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.696341Jy sigma=0.005042 ! Fit after self-cal, rms=0.539327Jy sigma=0.003504 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 9.73% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.5482 mas, bmaj=0.8075 mas, bpa=-8.101 degrees ! Estimated noise=920.376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.451802 Jy ! Component: 100 - total flux cleaned = 0.587841 Jy ! Total flux subtracted in 100 components = 0.587841 Jy ! Clean residual min=-0.025720 max=0.087043 Jy/beam ! Clean residual mean=0.000316 rms=0.009295 Jy/beam ! Combined flux in latest and established models = 0.587841 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.58784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309904Jy sigma=0.001774 ! Fit after self-cal, rms=0.309175Jy sigma=0.001771 ! Inverting map ! Your choice of large map pixels excluded 9.73% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Added new window around map position (-1, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0892787 Jy ! Component: 100 - total flux cleaned = 0.138181 Jy ! Total flux subtracted in 100 components = 0.138181 Jy ! Clean residual min=-0.022198 max=0.061451 Jy/beam ! Clean residual mean=-0.000137 rms=0.005980 Jy/beam ! Combined flux in latest and established models = 0.726022 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.726022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288298Jy sigma=0.001488 ! Fit after self-cal, rms=0.284297Jy sigma=0.001453 ! Inverting map ! Your choice of large map pixels excluded 9.73% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Added new window around map position (-1.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467817 Jy ! Component: 100 - total flux cleaned = 0.0710971 Jy ! Total flux subtracted in 100 components = 0.0710971 Jy ! Clean residual min=-0.016036 max=0.038390 Jy/beam ! Clean residual mean=-0.000380 rms=0.004116 Jy/beam ! Combined flux in latest and established models = 0.797119 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.797119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277913Jy sigma=0.001368 ! Fit after self-cal, rms=0.276540Jy sigma=0.001354 ! Inverting map ! Your choice of large map pixels excluded 9.73% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Added new window around map position (0.8, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02834 Jy ! Component: 100 - total flux cleaned = 0.0391822 Jy ! Total flux subtracted in 100 components = 0.0391822 Jy ! Clean residual min=-0.012971 max=0.020517 Jy/beam ! Clean residual mean=-0.000511 rms=0.003084 Jy/beam ! Combined flux in latest and established models = 0.836301 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.836301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273993Jy sigma=0.001328 ! Fit after self-cal, rms=0.273928Jy sigma=0.001328 ! Inverting map ! Your choice of large map pixels excluded 9.73% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Added new window around map position (-3, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156183 Jy ! Component: 100 - total flux cleaned = 0.0210044 Jy ! Total flux subtracted in 100 components = 0.0210044 Jy ! Clean residual min=-0.011575 max=0.016082 Jy/beam ! Clean residual mean=-0.000583 rms=0.002697 Jy/beam ! Combined flux in latest and established models = 0.857305 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.857305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272329Jy sigma=0.001319 ! Fit after self-cal, rms=0.272244Jy sigma=0.001319 ! Inverting map ! Your choice of large map pixels excluded 9.73% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 9.73% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.57 mas, bmaj=1.034 mas, bpa=-6.516 degrees ! Estimated noise=486.129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00856321 Jy ! Component: 100 - total flux cleaned = 0.0103097 Jy ! Component: 150 - total flux cleaned = 0.0118449 Jy ! Component: 200 - total flux cleaned = 0.0131947 Jy ! Total flux subtracted in 200 components = 0.0131947 Jy ! Clean residual min=-0.015155 max=0.010944 Jy/beam ! Clean residual mean=-0.004366 rms=0.002891 Jy/beam ! Combined flux in latest and established models = 0.8705 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.8705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270846Jy sigma=0.001313 ! Fit after self-cal, rms=0.270738Jy sigma=0.001313 ! Inverting map ! Your choice of large map pixels excluded 9.73% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HH 0.92 HN 1.00* ! KB 1.06 KP 0.99 LA 0.97 MK 1.00* ! NL 1.08 NY 0.96 ON 0.94 OV 0.96 ! PT 0.98 SV 1.04 TS 1.09 WZ 1.04 ! ZC 1.00 ! ! A total of 183 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HH 0.89 HN 1.00* ! KB 1.04 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.97 ON 1.14 OV 1.00* ! PT 1.00* SV 1.05 TS 1.16 WZ 1.00* ! ZC 1.09 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* HH 0.93 HN 1.01 ! KB 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.99 ON 0.89 OV 1.00* ! PT 1.00* SV 1.03 TS 1.00* WZ 1.06 ! ZC 1.09 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 FD 0.96 HH 0.76 HN 1.22 ! KB 1.00* KP 0.98 LA 0.97 MK 1.00* ! NL 1.06 NY 1.05 ON 1.03 OV 0.96 ! PT 0.97 SV 1.00* TS 1.00* WZ 1.09 ! ZC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HH 0.93 HN 1.00* ! KB 1.05 KP 0.94 LA 0.98 MK 1.00* ! NL 1.04 NY 0.98 ON 0.96 OV 0.94 ! PT 1.00 SV 1.00 TS 1.14 WZ 1.03 ! ZC 1.02 ! ! A total of 183 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HH 0.93 HN 1.00* ! KB 1.09 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.97 ON 1.07 OV 1.00* ! PT 1.00* SV 1.02 TS 1.18 WZ 1.00* ! ZC 1.08 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* HH 0.94 HN 1.06 ! KB 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.01 ON 0.91 OV 1.00* ! PT 1.00* SV 0.98 TS 1.00* WZ 1.06 ! ZC 1.10 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.95 HH 0.78 HN 1.21 ! KB 1.00* KP 0.93 LA 0.96 MK 1.00* ! NL 1.02 NY 1.05 ON 1.03 OV 0.94 ! PT 1.02 SV 1.00* TS 1.00* WZ 1.06 ! ZC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HH 0.92 HN 1.00* ! KB 1.07 KP 0.99 LA 0.99 MK 1.00* ! NL 1.04 NY 0.99 ON 0.93 OV 0.99 ! PT 1.02 SV 0.99 TS 1.12 WZ 0.98 ! ZC 0.99 ! ! A total of 183 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HH 0.93 HN 1.00* ! KB 1.04 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.98 ON 1.05 OV 1.00* ! PT 1.00* SV 0.97 TS 1.22 WZ 1.00* ! ZC 1.11 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* HH 0.94 HN 0.99 ! KB 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.06 ON 0.91 OV 1.00* ! PT 1.00* SV 0.96 TS 1.00* WZ 1.03 ! ZC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 0.95 HH 0.76 HN 1.21 ! KB 1.00* KP 0.96 LA 0.99 MK 1.00* ! NL 1.02 NY 1.08 ON 0.97 OV 1.00 ! PT 1.02 SV 1.00* TS 1.00* WZ 1.03 ! ZC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HH 0.86 HN 1.00* ! KB 1.05 KP 0.99 LA 0.97 MK 1.00* ! NL 1.05 NY 0.97 ON 1.00 OV 0.98 ! PT 1.03 SV 1.02 TS 1.15 WZ 0.95 ! ZC 1.00* ! ! A total of 183 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HH 0.88 HN 1.00* ! KB 1.06 KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 0.93 ON 1.04 OV 1.00* ! PT 1.00* SV 0.96 TS 1.19 WZ 1.00* ! ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* HH 0.91 HN 1.03 ! KB 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.01 ON 0.89 OV 1.00* ! PT 1.00* SV 1.02 TS 1.00* WZ 1.01 ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.95 HH 0.73 HN 1.23 ! KB 1.00* KP 0.96 LA 0.97 MK 1.00* ! NL 1.02 NY 1.05 ON 0.99 OV 0.99 ! PT 1.01 SV 1.00* TS 1.00* WZ 1.03 ! ZC 1.00* ! ! ! Fit before self-cal, rms=0.270738Jy sigma=0.001313 ! Fit after self-cal, rms=0.254013Jy sigma=0.001243 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.5747 mas, bmaj=1 mas, bpa=-6.616 degrees ! Estimated noise=491.163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0059503 Jy ! Component: 100 - total flux cleaned = -0.00682411 Jy ! Component: 150 - total flux cleaned = -0.00682298 Jy ! Component: 200 - total flux cleaned = -0.00662187 Jy ! Total flux subtracted in 200 components = -0.00662187 Jy ! Clean residual min=-0.006706 max=0.005571 Jy/beam ! Clean residual mean=-0.000514 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.863878 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.863878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253296Jy sigma=0.001237 ! Fit after self-cal, rms=0.253064Jy sigma=0.001237 ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253064Jy sigma=0.001237 ! Fit after self-cal, rms=0.255267Jy sigma=0.001234 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.5758 mas, bmaj=0.9961 mas, bpa=-6.649 degrees ! Estimated noise=491.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00276985 Jy ! Component: 100 - total flux cleaned = -0.00331733 Jy ! Component: 150 - total flux cleaned = -0.00364505 Jy ! Component: 200 - total flux cleaned = -0.00394083 Jy ! Total flux subtracted in 200 components = -0.00394083 Jy ! Clean residual min=-0.005630 max=0.004762 Jy/beam ! Clean residual mean=-0.000250 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.859937 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.859937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254971Jy sigma=0.001232 ! Fit after self-cal, rms=0.255117Jy sigma=0.001232 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146499 Jy ! Component: 100 - total flux cleaned = -0.000150089 Jy ! Component: 150 - total flux cleaned = -0.00027894 Jy ! Component: 200 - total flux cleaned = -0.000398137 Jy ! Total flux subtracted in 200 components = -0.000398137 Jy ! Clean residual min=-0.005375 max=0.004674 Jy/beam ! Clean residual mean=-0.000242 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.859539 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.859539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254939Jy sigma=0.001231 ! Fit after self-cal, rms=0.254922Jy sigma=0.001230 ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254922Jy sigma=0.001230 ! Fit after self-cal, rms=0.255480Jy sigma=0.001230 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.5769 mas, bmaj=0.9934 mas, bpa=-6.668 degrees ! Estimated noise=492.006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128013 Jy ! Component: 100 - total flux cleaned = -0.00167576 Jy ! Component: 150 - total flux cleaned = -0.00191426 Jy ! Component: 200 - total flux cleaned = -0.00191522 Jy ! Total flux subtracted in 200 components = -0.00191522 Jy ! Clean residual min=-0.004874 max=0.004643 Jy/beam ! Clean residual mean=-0.000167 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.857624 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.857624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255337Jy sigma=0.001229 ! Fit after self-cal, rms=0.255345Jy sigma=0.001229 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375654 Jy ! Component: 100 - total flux cleaned = -0.000479108 Jy ! Component: 150 - total flux cleaned = -0.000476403 Jy ! Component: 200 - total flux cleaned = -0.000570289 Jy ! Total flux subtracted in 200 components = -0.000570289 Jy ! Clean residual min=-0.004717 max=0.004554 Jy/beam ! Clean residual mean=-0.000155 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.857054 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.857054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255230Jy sigma=0.001228 ! Fit after self-cal, rms=0.255207Jy sigma=0.001228 ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255207Jy sigma=0.001228 ! Fit after self-cal, rms=0.255431Jy sigma=0.001228 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=2.703 mas, bmaj=4.036 mas, bpa=-25.42 degrees ! Estimated noise=586.714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00229539 Jy ! Component: 100 - total flux cleaned = -0.00219663 Jy ! Component: 150 - total flux cleaned = -0.0021994 Jy ! Component: 200 - total flux cleaned = -0.00226843 Jy ! Total flux subtracted in 200 components = -0.00226843 Jy ! Clean residual min=-0.004534 max=0.003896 Jy/beam ! Clean residual mean=-0.000190 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.854785 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.854785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255439Jy sigma=0.001228 ! Fit after self-cal, rms=0.255440Jy sigma=0.001228 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116688 Jy ! Component: 100 - total flux cleaned = 2.61177e-05 Jy ! Component: 150 - total flux cleaned = 0.000158601 Jy ! Component: 200 - total flux cleaned = 0.000157872 Jy ! Total flux subtracted in 200 components = 0.000157872 Jy ! Clean residual min=-0.004534 max=0.003793 Jy/beam ! Clean residual mean=-0.000197 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.854943 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 73 components and 0.854943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255443Jy sigma=0.001228 ! Fit after self-cal, rms=0.255438Jy sigma=0.001228 ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.5774 mas, bmaj=0.9912 mas, bpa=-6.684 degrees ! Estimated noise=492.615 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5774 x 0.9912 at -6.684 degrees (North through East) ! Clean map min=-0.0039489 max=0.51659 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255438Jy sigma=0.001228 ! Fit after self-cal, rms=0.435836Jy sigma=0.001124 ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.5774 mas, bmaj=0.9912 mas, bpa=-6.67 degrees ! Estimated noise=492.834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336427 Jy ! Component: 100 - total flux cleaned = 0.00010851 Jy ! Component: 150 - total flux cleaned = -9.49584e-05 Jy ! Component: 200 - total flux cleaned = -0.000185535 Jy ! Total flux subtracted in 200 components = -0.000185535 Jy ! Clean residual min=-0.004218 max=0.004580 Jy/beam ! Clean residual mean=-0.000126 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.854757 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.854757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.435784Jy sigma=0.001124 ! Fit after self-cal, rms=0.436076Jy sigma=0.001124 ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Added new window around map position (14.2, -10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305608 Jy ! Component: 100 - total flux cleaned = 0.00305637 Jy ! Component: 150 - total flux cleaned = 0.00296852 Jy ! Component: 200 - total flux cleaned = 0.0029679 Jy ! Total flux subtracted in 200 components = 0.0029679 Jy ! Clean residual min=-0.004113 max=0.003808 Jy/beam ! Clean residual mean=-0.000178 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.857725 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 79 components and 0.857725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.436009Jy sigma=0.001123 ! Fit after self-cal, rms=0.436159Jy sigma=0.001123 ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.436159Jy sigma=0.001123 ! Fit after self-cal, rms=0.645367Jy sigma=0.001123 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.5559 mas, bmaj=0.766 mas, bpa=-7.882 degrees ! Estimated noise=925.266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.45339 Jy ! Component: 100 - total flux cleaned = 0.606256 Jy ! Component: 150 - total flux cleaned = 0.690546 Jy ! Component: 200 - total flux cleaned = 0.741308 Jy ! Total flux subtracted in 200 components = 0.741308 Jy ! Clean residual min=-0.010362 max=0.028338 Jy/beam ! Clean residual mean=0.000298 rms=0.003396 Jy/beam ! Combined flux in latest and established models = 0.741308 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.741308 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.5776 mas, bmaj=0.989 mas, bpa=-6.663 degrees ! Estimated noise=493.102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373895 Jy ! Component: 100 - total flux cleaned = 0.0614732 Jy ! Component: 150 - total flux cleaned = 0.0779443 Jy ! Component: 200 - total flux cleaned = 0.089332 Jy ! Total flux subtracted in 200 components = 0.089332 Jy ! Clean residual min=-0.004729 max=0.009285 Jy/beam ! Clean residual mean=0.000465 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.83064 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.83064 Jy ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Added new window around map position (0, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00906086 Jy ! Component: 100 - total flux cleaned = 0.0149814 Jy ! Component: 150 - total flux cleaned = 0.0191163 Jy ! Component: 200 - total flux cleaned = 0.0210043 Jy ! Total flux subtracted in 200 components = 0.0210043 Jy ! Clean residual min=-0.004174 max=0.004163 Jy/beam ! Clean residual mean=0.000037 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.851645 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 61 components and 0.851645 Jy ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=2.704 mas, bmaj=4.036 mas, bpa=-25.42 degrees ! Estimated noise=586.905 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331874 Jy ! Component: 100 - total flux cleaned = 0.00429057 Jy ! Component: 150 - total flux cleaned = 0.00510215 Jy ! Component: 200 - total flux cleaned = 0.00580005 Jy ! Total flux subtracted in 200 components = 0.00580005 Jy ! Clean residual min=-0.004436 max=0.003762 Jy/beam ! Clean residual mean=-0.000182 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.857445 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327893 Jy ! Component: 100 - total flux cleaned = 0.000522617 Jy ! Component: 150 - total flux cleaned = 0.000657222 Jy ! Component: 200 - total flux cleaned = 0.000819909 Jy ! Total flux subtracted in 200 components = 0.000819909 Jy ! Clean residual min=-0.004408 max=0.003594 Jy/beam ! Clean residual mean=-0.000216 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.858265 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.858265 Jy ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.5776 mas, bmaj=0.989 mas, bpa=-6.663 degrees ! Estimated noise=493.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123552 Jy ! Component: 100 - total flux cleaned = 0.00150999 Jy ! Component: 150 - total flux cleaned = 0.0015107 Jy ! Component: 200 - total flux cleaned = 0.00151191 Jy ! Total flux subtracted in 200 components = 0.00151191 Jy ! Clean residual min=-0.004046 max=0.003931 Jy/beam ! Clean residual mean=-0.000123 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.859776 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.859776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.645475Jy sigma=0.001125 ! Fit after self-cal, rms=0.646023Jy sigma=0.001124 wmodel J0108+0135_X_2007_12_05_pus_map.mod ! Writing 80 model components to file: J0108+0135_X_2007_12_05_pus_map.mod wobs J0108+0135_X_2007_12_05_pus_uvs.fits ! Writing UV FITS file: J0108+0135_X_2007_12_05_pus_uvs.fits wwins J0108+0135_X_2007_12_05_pus_map.win ! wwins: Wrote 7 windows to J0108+0135_X_2007_12_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000558842 Jy ! Component: 100 - total flux cleaned = -0.000438677 Jy ! Component: 150 - total flux cleaned = -0.000662017 Jy ! Component: 200 - total flux cleaned = -0.00103609 Jy ! Component: 250 - total flux cleaned = -0.00150095 Jy ! Component: 300 - total flux cleaned = -0.00185112 Jy ! Component: 350 - total flux cleaned = -0.00209466 Jy ! Component: 400 - total flux cleaned = -0.00233383 Jy ! Component: 450 - total flux cleaned = -0.00256783 Jy ! Component: 500 - total flux cleaned = -0.00288734 Jy ! Component: 550 - total flux cleaned = -0.00306591 Jy ! Component: 600 - total flux cleaned = -0.00328611 Jy ! Component: 650 - total flux cleaned = -0.00354482 Jy ! Component: 700 - total flux cleaned = -0.0036292 Jy ! Component: 750 - total flux cleaned = -0.00375412 Jy ! Component: 800 - total flux cleaned = -0.00379524 Jy ! Component: 850 - total flux cleaned = -0.00395794 Jy ! Component: 900 - total flux cleaned = -0.0040782 Jy ! Component: 950 - total flux cleaned = -0.00415742 Jy ! Component: 1000 - total flux cleaned = -0.00427454 Jy ! Component: 1050 - total flux cleaned = -0.00439 Jy ! Component: 1100 - total flux cleaned = -0.00446594 Jy ! Component: 1150 - total flux cleaned = -0.00450332 Jy ! Component: 1200 - total flux cleaned = -0.00457729 Jy ! Component: 1250 - total flux cleaned = -0.00457714 Jy ! Component: 1300 - total flux cleaned = -0.00464981 Jy ! Component: 1350 - total flux cleaned = -0.00468554 Jy ! Component: 1400 - total flux cleaned = -0.0046856 Jy ! Component: 1450 - total flux cleaned = -0.00472082 Jy ! Component: 1500 - total flux cleaned = -0.00475589 Jy ! Component: 1550 - total flux cleaned = -0.00482483 Jy ! Component: 1600 - total flux cleaned = -0.00479051 Jy ! Component: 1650 - total flux cleaned = -0.00485818 Jy ! Component: 1700 - total flux cleaned = -0.00492509 Jy ! Component: 1750 - total flux cleaned = -0.00489159 Jy ! Component: 1800 - total flux cleaned = -0.00492452 Jy ! Component: 1850 - total flux cleaned = -0.00495729 Jy ! Component: 1900 - total flux cleaned = -0.00498989 Jy ! Component: 1950 - total flux cleaned = -0.00505457 Jy ! Component: 2000 - total flux cleaned = -0.00508666 Jy ! Total flux subtracted in 2048 components = -0.00511857 Jy ! Clean residual min=-0.001714 max=0.001879 Jy/beam ! Clean residual mean=-0.000022 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.854658 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 229 components and 0.854658 Jy wmap "J0108+0135_X_2007_12_05_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5776 x 0.989 at -6.663 degrees (North through East) ! Clean map min=-0.0033208 max=0.51513 Jy/beam ! Writing clean map to FITS file: J0108+0135_X_2007_12_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.515132 invert ! Inverting map ! Your choice of large map pixels excluded 9.36% of the data. ! The x-axis pixel size should ideally be below 0.1638 milli-arcsec ! The y-axis pixel size should ideally be below 0.1873 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000560839 device "J0108+0135_X_2007_12_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0108+0135_X_2007_12_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.326619 0.326619 0.653238 1.30648 2.61295 5.22591 10.4518 20.9036 41.8072 83.6145 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.515 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5776 x 0.989 at -6.663 degrees (North through East) ! Clean map min=-0.0033208 max=0.51513 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0108+0135_X_2007_12_05_pus\_map.gif/vgif" ! Attempting to open device: 'J0108+0135_X_2007_12_05_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0108+0135_X_2007_12_05_pus_uvs.log closed on Wed Sep 8 21:14:35 2010