! Started logfile: /scr/pima/rdv62_uvs/J2038+5119_X_uvs.log on Fri Nov 22 22:41:48 2013 obs /scr/pima/rdv62_uvs/J2038+5119_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv62_uvs/J2038+5119_X_uva.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! AN table 2: 3 integrations on 10 of 10 possible baselines. ! AN table 3: 9 integrations on 55 of 55 possible baselines. ! AN table 4: 3 integrations on 1 of 1 possible baselines. ! AN table 5: 12 integrations on 3 of 3 possible baselines. ! AN table 6: 8 integrations on 28 of 28 possible baselines. ! AN table 7: 11 integrations on 55 of 55 possible baselines. ! AN table 8: 9 integrations on 36 of 36 possible baselines. ! AN table 9: 17 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.479466 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2038+5119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5604 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv62_uvs/J2038+5119_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:KK self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MK self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:ZC self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:ZC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 7:ZC self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 ! 8:ZC self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:FD self-cal status=correctable weight=1 ! 9:HN self-cal status=correctable weight=1 ! 9:KP self-cal status=correctable weight=1 ! 9:LA self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 9:PT self-cal status=correctable weight=1 ! 9:SC self-cal status=correctable weight=1 ! 9:WZ self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 103 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 103 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 103 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 34 telescope corrections were flagged in sub-array 7. ! A total of 22 telescope corrections were flagged in sub-array 8. ! A total of 103 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=2.067782Jy sigma=37.561182 ! Fit after self-cal, rms=0.975965Jy sigma=16.377020 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 3:KK ! Flagging baselines of antenna 3:KK in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 3:ZC ! Flagging baselines of antenna 3:ZC in the currently selected channels. flag 4:NY ! Flagging baselines of antenna 4:NY in the currently selected channels. flag 5:ZC ! Flagging baselines of antenna 5:ZC in the currently selected channels. flag 6:NY ! Flagging baselines of antenna 6:NY in the currently selected channels. flag 6:ZC ! Flagging baselines of antenna 6:ZC in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. flag 7:ZC ! Flagging baselines of antenna 7:ZC in the currently selected channels. flag 8:ZC ! Flagging baselines of antenna 8:ZC in the currently selected channels. flag 9:NY ! Flagging baselines of antenna 9:NY in the currently selected channels. flag 9:WZ ! Flagging baselines of antenna 9:WZ in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.937 mas, bmaj=1.594 mas, bpa=-71.52 degrees ! Estimated noise=0.90645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.36414 Jy ! Component: 100 - total flux cleaned = 1.67824 Jy ! Total flux subtracted in 100 components = 1.67824 Jy ! Clean residual min=-0.039513 max=0.116122 Jy/beam ! Clean residual mean=-0.000124 rms=0.012283 Jy/beam ! Combined flux in latest and established models = 1.67824 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.67824 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 1 telescope corrections were flagged in sub-array 8. ! A total of 9 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 1 telescope corrections were flagged in sub-array 8. ! A total of 9 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 1 telescope corrections were flagged in sub-array 8. ! A total of 9 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=0.367797Jy sigma=7.992253 ! Fit after self-cal, rms=0.368231Jy sigma=8.002717 ! Inverting map and beam ! Estimated beam: bmin=0.9364 mas, bmaj=1.601 mas, bpa=-71.68 degrees ! Estimated noise=0.909146 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121663 Jy ! Component: 100 - total flux cleaned = 0.180594 Jy ! Total flux subtracted in 100 components = 0.180594 Jy ! Clean residual min=-0.035527 max=0.107848 Jy/beam ! Clean residual mean=-0.000051 rms=0.010042 Jy/beam ! Combined flux in latest and established models = 1.85884 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 1.85884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307961Jy sigma=6.455510 ! Fit after self-cal, rms=0.307938Jy sigma=6.453546 ! Inverting map ! Added new window around map position (-4.4, -5.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111417 Jy ! Component: 100 - total flux cleaned = 0.176916 Jy ! Total flux subtracted in 100 components = 0.176916 Jy ! Clean residual min=-0.028189 max=0.051106 Jy/beam ! Clean residual mean=-0.000045 rms=0.007371 Jy/beam ! Combined flux in latest and established models = 2.03575 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 2.03575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236590Jy sigma=4.872546 ! Fit after self-cal, rms=0.229425Jy sigma=4.768777 ! Inverting map ! Added new window around map position (-5.2, -4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0593104 Jy ! Component: 100 - total flux cleaned = 0.101855 Jy ! Total flux subtracted in 100 components = 0.101855 Jy ! Clean residual min=-0.025944 max=0.035804 Jy/beam ! Clean residual mean=-0.000030 rms=0.006089 Jy/beam ! Combined flux in latest and established models = 2.13761 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 2.13761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200223Jy sigma=4.090239 ! Fit after self-cal, rms=0.198362Jy sigma=4.064856 ! Inverting map ! Added new window around map position (-6.8, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405621 Jy ! Component: 100 - total flux cleaned = 0.0712858 Jy ! Total flux subtracted in 100 components = 0.0712858 Jy ! Clean residual min=-0.024501 max=0.029813 Jy/beam ! Clean residual mean=-0.000019 rms=0.005446 Jy/beam ! Combined flux in latest and established models = 2.2089 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 87 components and 2.2089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182191Jy sigma=3.667711 ! Fit after self-cal, rms=0.181246Jy sigma=3.657376 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.243 mas, bmaj=2.196 mas, bpa=-75.87 degrees ! Estimated noise=0.597764 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.2, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0617517 Jy ! Component: 100 - total flux cleaned = 0.102608 Jy ! Component: 150 - total flux cleaned = 0.13292 Jy ! Component: 200 - total flux cleaned = 0.156023 Jy ! Total flux subtracted in 200 components = 0.156023 Jy ! Clean residual min=-0.025170 max=0.026637 Jy/beam ! Clean residual mean=0.000025 rms=0.006346 Jy/beam ! Combined flux in latest and established models = 2.36492 Jy ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 153 components and 2.36492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159151Jy sigma=3.033715 ! Fit after self-cal, rms=0.156436Jy sigma=2.995722 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.99 KP 1.01 ! LA 0.95 MK 0.98 NL 1.00 OV 0.99 ! PT 0.98 SC 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 KP 1.02 LA 0.96 OV 1.04 ! PT 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 KK 1.00* KP 1.02 LA 0.95 ! MK 0.98 NL 1.13 NY 1.00* OV 1.01 ! PT 0.98 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 HN 1.03 LA 0.94 NL 1.02 ! NY 1.00* PT 1.03 SC 1.06 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 FD 1.00 HN 1.00 KP 1.05 ! LA 0.93 NL 0.98 NY 1.00* PT 0.96 ! SC 1.03 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.99 FD 1.00 KP 0.98 LA 0.98 ! NL 1.00 OV 1.01 PT 0.98 SC 1.04 ! ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.99 FD 1.05 HN 0.99 KP 0.97 ! LA 0.94 NL 1.02 NY 1.00* OV 1.02 ! PT 0.96 SC 1.03 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.99 KP 0.95 ! LA 0.94 MK 0.99 NL 0.98 OV 0.96 ! PT 1.02 SC 1.22 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 KP 0.99 LA 0.93 OV 1.02 ! PT 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 KK 1.00* KP 0.97 LA 0.95 ! MK 0.99 NL 1.09 NY 1.00* OV 0.99 ! PT 1.03 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 HN 1.03 LA 0.94 NL 0.99 ! NY 1.00* PT 1.09 SC 1.01 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 FD 0.98 HN 1.00 KP 1.00 ! LA 0.93 NL 0.96 NY 1.00* PT 1.01 ! SC 1.00 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.99 FD 0.99 KP 0.92 LA 0.97 ! NL 0.98 OV 1.00 PT 1.02 SC 1.01 ! ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.99 FD 1.03 HN 1.00 KP 0.93 ! LA 0.94 NL 1.00 NY 1.00* OV 0.99 ! PT 1.01 SC 1.01 WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.96 KP 0.88 ! LA 1.00 MK 0.98 NL 1.00 OV 1.02 ! PT 1.03 SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 KP 0.90 LA 0.99 OV 1.07 ! PT 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 KK 1.00* KP 0.91 LA 1.00 ! MK 0.98 NL 1.12 NY 1.00* OV 1.04 ! PT 1.08 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 HN 1.00 LA 1.00 NL 1.03 ! NY 1.00* PT 1.11 SC 0.97 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 1.02 HN 0.99 KP 0.93 ! LA 0.99 NL 0.98 NY 1.00* PT 1.04 ! SC 0.97 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.05 FD 1.03 KP 0.87 LA 1.03 ! NL 1.00 OV 1.05 PT 1.05 SC 0.98 ! ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.06 FD 1.06 HN 0.97 KP 0.85 ! LA 1.00 NL 1.02 NY 1.00* OV 1.05 ! PT 1.03 SC 0.99 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00 KP 0.94 ! LA 0.97 MK 1.01 NL 1.01 OV 0.99 ! PT 1.02 SC 1.22 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 KP 0.95 LA 0.97 OV 1.04 ! PT 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 KK 1.00* KP 0.97 LA 0.98 ! MK 1.00 NL 1.14 NY 1.00* OV 1.02 ! PT 1.06 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 HN 1.05 LA 0.98 NL 1.04 ! NY 1.00* PT 1.10 SC 1.05 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 FD 1.04 HN 1.04 KP 1.00 ! LA 0.97 NL 1.01 NY 1.00* PT 1.02 ! SC 1.02 WZ 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.01 FD 1.03 KP 0.92 LA 1.02 ! NL 1.02 OV 1.03 PT 1.04 SC 1.03 ! ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.02 FD 1.07 HN 1.03 KP 0.91 ! LA 0.98 NL 1.03 NY 1.00* OV 1.03 ! PT 1.03 SC 1.03 WZ 1.00* ! ! ! Fit before self-cal, rms=0.156436Jy sigma=2.995722 ! Fit after self-cal, rms=0.108355Jy sigma=1.943053 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.229 mas, bmaj=2.168 mas, bpa=-76.44 degrees ! Estimated noise=0.610575 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195048 Jy ! Component: 100 - total flux cleaned = 0.0260112 Jy ! Component: 150 - total flux cleaned = 0.0306657 Jy ! Component: 200 - total flux cleaned = 0.0332673 Jy ! Total flux subtracted in 200 components = 0.0332673 Jy ! Clean residual min=-0.008328 max=0.014175 Jy/beam ! Clean residual mean=0.000052 rms=0.002613 Jy/beam ! Combined flux in latest and established models = 2.39819 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 181 components and 2.39819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104462Jy sigma=1.853386 ! Fit after self-cal, rms=0.103951Jy sigma=1.845968 ! Inverting map ! Added new window around map position (-9, -17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142022 Jy ! Component: 100 - total flux cleaned = 0.0212001 Jy ! Component: 150 - total flux cleaned = 0.0249888 Jy ! Component: 200 - total flux cleaned = 0.0277398 Jy ! Total flux subtracted in 200 components = 0.0277398 Jy ! Clean residual min=-0.007853 max=0.009804 Jy/beam ! Clean residual mean=0.000033 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 2.42593 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 212 components and 2.42593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101862Jy sigma=1.797689 ! Fit after self-cal, rms=0.101350Jy sigma=1.792715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101350Jy sigma=1.792715 ! Fit after self-cal, rms=0.100523Jy sigma=1.777163 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.23 mas, bmaj=2.168 mas, bpa=-76.45 degrees ! Estimated noise=0.610771 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00861237 Jy ! Component: 100 - total flux cleaned = 0.0150207 Jy ! Component: 150 - total flux cleaned = 0.0186083 Jy ! Component: 200 - total flux cleaned = 0.0211176 Jy ! Total flux subtracted in 200 components = 0.0211176 Jy ! Clean residual min=-0.006741 max=0.008714 Jy/beam ! Clean residual mean=0.000029 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 2.44704 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 232 components and 2.44704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099560Jy sigma=1.752232 ! Fit after self-cal, rms=0.099319Jy sigma=1.749956 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.4, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00836788 Jy ! Component: 100 - total flux cleaned = 0.0123223 Jy ! Component: 150 - total flux cleaned = 0.0146439 Jy ! Component: 200 - total flux cleaned = 0.0164147 Jy ! Total flux subtracted in 200 components = 0.0164147 Jy ! Clean residual min=-0.006359 max=0.006931 Jy/beam ! Clean residual mean=0.000015 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 2.46346 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 252 components and 2.46346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098535Jy sigma=1.731991 ! Fit after self-cal, rms=0.098335Jy sigma=1.730111 ! Inverting map ! Added new window around map position (-4.2, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678706 Jy ! Component: 100 - total flux cleaned = 0.00854655 Jy ! Component: 150 - total flux cleaned = 0.0089622 Jy ! Component: 200 - total flux cleaned = 0.00972306 Jy ! Total flux subtracted in 200 components = 0.00972306 Jy ! Clean residual min=-0.006266 max=0.006010 Jy/beam ! Clean residual mean=0.000001 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 2.47318 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 269 components and 2.47318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097770Jy sigma=1.717551 ! Fit after self-cal, rms=0.097643Jy sigma=1.716277 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097643Jy sigma=1.716277 ! Fit after self-cal, rms=0.097328Jy sigma=1.709403 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.229 mas, bmaj=2.168 mas, bpa=-76.45 degrees ! Estimated noise=0.610957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559123 Jy ! Component: 100 - total flux cleaned = 0.00959025 Jy ! Component: 150 - total flux cleaned = 0.0124 Jy ! Component: 200 - total flux cleaned = 0.0138129 Jy ! Total flux subtracted in 200 components = 0.0138129 Jy ! Clean residual min=-0.005511 max=0.005798 Jy/beam ! Clean residual mean=0.000002 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 2.48699 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 286 components and 2.48699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096910Jy sigma=1.698944 ! Fit after self-cal, rms=0.096800Jy sigma=1.697888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252928 Jy ! Component: 100 - total flux cleaned = 0.00357391 Jy ! Component: 150 - total flux cleaned = 0.00410737 Jy ! Component: 200 - total flux cleaned = 0.00450961 Jy ! Total flux subtracted in 200 components = 0.00450961 Jy ! Clean residual min=-0.005462 max=0.005763 Jy/beam ! Clean residual mean=-0.000003 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 2.4915 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 295 components and 2.4915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096582Jy sigma=1.692903 ! Fit after self-cal, rms=0.096538Jy sigma=1.692582 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096538Jy sigma=1.692582 ! Fit after self-cal, rms=0.096466Jy sigma=1.690447 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=3.811 mas, bpa=-67.79 degrees ! Estimated noise=0.686277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512026 Jy ! Component: 100 - total flux cleaned = 0.00706352 Jy ! Component: 150 - total flux cleaned = 0.00793281 Jy ! Component: 200 - total flux cleaned = 0.00847146 Jy ! Total flux subtracted in 200 components = 0.00847146 Jy ! Clean residual min=-0.006085 max=0.007626 Jy/beam ! Clean residual mean=-0.000002 rms=0.001929 Jy/beam ! Combined flux in latest and established models = 2.49998 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 319 components and 2.49998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096260Jy sigma=1.684843 ! Fit after self-cal, rms=0.096201Jy sigma=1.684144 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166109 Jy ! Component: 100 - total flux cleaned = 0.00241204 Jy ! Component: 150 - total flux cleaned = 0.0027915 Jy ! Component: 200 - total flux cleaned = 0.00296472 Jy ! Total flux subtracted in 200 components = 0.00296472 Jy ! Clean residual min=-0.005968 max=0.007518 Jy/beam ! Clean residual mean=-0.000008 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 2.50294 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 332 components and 2.50294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096112Jy sigma=1.681476 ! Fit after self-cal, rms=0.096079Jy sigma=1.681201 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 1:SC,true ! 1:SC self-cal status=fixed weight=1 selfant 2:FD,true ! 2:FD self-cal status=fixed weight=1 selfant 2:KP,true ! 2:KP self-cal status=fixed weight=1 selfant 2:LA,true ! 2:LA self-cal status=fixed weight=1 selfant 2:OV,true ! 2:OV self-cal status=fixed weight=1 selfant 2:PT,true ! 2:PT self-cal status=fixed weight=1 selfant 3:BR,true ! 3:BR self-cal status=fixed weight=1 selfant 3:KP,true ! 3:KP self-cal status=fixed weight=1 selfant 3:LA,true ! 3:LA self-cal status=fixed weight=1 selfant 3:MK,true ! 3:MK self-cal status=fixed weight=1 selfant 3:NL,true ! 3:NL self-cal status=fixed weight=1 selfant 3:OV,true ! 3:OV self-cal status=fixed weight=1 selfant 3:PT,true ! 3:PT self-cal status=fixed weight=1 selfant 4:BR,true ! 4:BR self-cal status=fixed weight=1 selfant 5:BR,true ! 5:BR self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 6:BR,true ! 6:BR self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:NL,true ! 8:NL self-cal status=fixed weight=1 selfant 8:OV,true ! 8:OV self-cal status=fixed weight=1 selfant 8:PT,true ! 8:PT self-cal status=fixed weight=1 selfant 8:SC,true ! 8:SC self-cal status=fixed weight=1 selfant 9:BR,true ! 9:BR self-cal status=fixed weight=1 selfant 9:FD,true ! 9:FD self-cal status=fixed weight=1 selfant 9:HN,true ! 9:HN self-cal status=fixed weight=1 selfant 9:KP,true ! 9:KP self-cal status=fixed weight=1 selfant 9:LA,true ! 9:LA self-cal status=fixed weight=1 selfant 9:NL,true ! 9:NL self-cal status=fixed weight=1 selfant 9:OV,true ! 9:OV self-cal status=fixed weight=1 selfant 9:PT,true ! 9:PT self-cal status=fixed weight=1 selfant 9:SC,true ! 9:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 11 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 8 telescope corrections were flagged in sub-array 8. ! A total of 25 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 11 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 8 telescope corrections were flagged in sub-array 8. ! A total of 25 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 11 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 8 telescope corrections were flagged in sub-array 8. ! A total of 25 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! A total of 25 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=0.676830Jy sigma=4.404133 ! Fit after self-cal, rms=3.344321Jy sigma=2.877503 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:KK self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MK self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 3:ZC self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:ZC self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:ZC self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 7:ZC self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 ! 8:ZC self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:FD self-cal status=correctable weight=1 ! 9:HN self-cal status=correctable weight=1 ! 9:KP self-cal status=correctable weight=1 ! 9:LA self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 9:PT self-cal status=correctable weight=1 ! 9:SC self-cal status=correctable weight=1 ! 9:WZ self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 114 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 114 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 114 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 114 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=3.344321Jy sigma=2.877503 ! Fit after self-cal, rms=3.418027Jy sigma=1.804091 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=0.7725 mas, bmaj=0.9638 mas, bpa=-1.597 degrees ! Estimated noise=1.11776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421838 Jy ! Component: 100 - total flux cleaned = 0.00465697 Jy ! Component: 150 - total flux cleaned = 0.00541931 Jy ! Component: 200 - total flux cleaned = 0.00578347 Jy ! Total flux subtracted in 200 components = 0.00578347 Jy ! Clean residual min=-0.010195 max=0.009206 Jy/beam ! Clean residual mean=-0.000004 rms=0.002095 Jy/beam ! Combined flux in latest and established models = 2.50872 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 359 components and 2.50872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.417774Jy sigma=1.797099 ! Fit after self-cal, rms=3.399492Jy sigma=1.794992 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=1.147 mas, bmaj=1.22 mas, bpa=-23.82 degrees ! Estimated noise=0.625596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.2, -22). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545135 Jy ! Component: 100 - total flux cleaned = 0.00708145 Jy ! Component: 150 - total flux cleaned = 0.00854923 Jy ! Component: 200 - total flux cleaned = 0.00957536 Jy ! Component: 250 - total flux cleaned = 0.0102227 Jy ! Component: 300 - total flux cleaned = 0.0105314 Jy ! Component: 350 - total flux cleaned = 0.0106815 Jy ! Component: 400 - total flux cleaned = 0.010974 Jy ! Total flux subtracted in 400 components = 0.010974 Jy ! Clean residual min=-0.005942 max=0.006305 Jy/beam ! Clean residual mean=-0.000002 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 2.5197 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 395 components and 2.5197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.399364Jy sigma=1.783435 ! Fit after self-cal, rms=3.399337Jy sigma=1.782628 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Added new window around map position (8, -10). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528851 Jy ! Component: 100 - total flux cleaned = 0.00578424 Jy ! Component: 150 - total flux cleaned = 0.00608555 Jy ! Component: 200 - total flux cleaned = 0.00608139 Jy ! Component: 250 - total flux cleaned = 0.00608715 Jy ! Component: 300 - total flux cleaned = 0.00622465 Jy ! Component: 350 - total flux cleaned = 0.00635974 Jy ! Component: 400 - total flux cleaned = 0.00636302 Jy ! Total flux subtracted in 400 components = 0.00636302 Jy ! Clean residual min=-0.005548 max=0.005834 Jy/beam ! Clean residual mean=-0.000009 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 2.52606 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 410 components and 2.52606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.399251Jy sigma=1.773964 ! Fit after self-cal, rms=3.399300Jy sigma=1.773544 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Added new window around map position (-46.2, 15.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058432 Jy ! Component: 100 - total flux cleaned = 0.00965995 Jy ! Component: 150 - total flux cleaned = 0.0116744 Jy ! Component: 200 - total flux cleaned = 0.0128991 Jy ! Component: 250 - total flux cleaned = 0.0132949 Jy ! Component: 300 - total flux cleaned = 0.0136848 Jy ! Component: 350 - total flux cleaned = 0.0138078 Jy ! Component: 400 - total flux cleaned = 0.0140606 Jy ! Total flux subtracted in 400 components = 0.0140606 Jy ! Clean residual min=-0.005165 max=0.005287 Jy/beam ! Clean residual mean=-0.000014 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 2.54012 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 434 components and 2.54012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.399234Jy sigma=1.764458 ! Fit after self-cal, rms=3.399218Jy sigma=1.763999 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Added new window around map position (-26.8, 0.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232748 Jy ! Component: 100 - total flux cleaned = 0.00277289 Jy ! Component: 150 - total flux cleaned = 0.00304655 Jy ! Component: 200 - total flux cleaned = 0.00343718 Jy ! Component: 250 - total flux cleaned = 0.00381605 Jy ! Component: 300 - total flux cleaned = 0.00406276 Jy ! Component: 350 - total flux cleaned = 0.00406505 Jy ! Component: 400 - total flux cleaned = 0.00418723 Jy ! Total flux subtracted in 400 components = 0.00418723 Jy ! Clean residual min=-0.005168 max=0.005031 Jy/beam ! Clean residual mean=-0.000013 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 2.54431 Jy ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 467 components and 2.54431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.399190Jy sigma=1.756304 ! Fit after self-cal, rms=3.399198Jy sigma=1.755915 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430387 Jy ! Component: 100 - total flux cleaned = 0.000671092 Jy ! Component: 150 - total flux cleaned = 0.000789238 Jy ! Component: 200 - total flux cleaned = 0.000907084 Jy ! Component: 250 - total flux cleaned = 0.00102114 Jy ! Component: 300 - total flux cleaned = 0.00101842 Jy ! Component: 350 - total flux cleaned = 0.00124399 Jy ! Component: 400 - total flux cleaned = 0.00124543 Jy ! Total flux subtracted in 400 components = 0.00124543 Jy ! Clean residual min=-0.005128 max=0.004904 Jy/beam ! Clean residual mean=-0.000012 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 2.54555 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 481 components and 2.54555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.399155Jy sigma=1.751953 ! Fit after self-cal, rms=3.399184Jy sigma=1.751843 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 139 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 139 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 139 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 36 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 34 telescope corrections were flagged in sub-array 7. ! A total of 22 telescope corrections were flagged in sub-array 8. ! A total of 139 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=3.375997Jy sigma=3.591257 ! Fit after self-cal, rms=1.062682Jy sigma=1.748818 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=1.146 mas, bmaj=1.221 mas, bpa=-23.59 degrees ! Estimated noise=0.625832 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366481 Jy ! Component: 100 - total flux cleaned = 0.00587362 Jy ! Component: 150 - total flux cleaned = 0.00685084 Jy ! Component: 200 - total flux cleaned = 0.00767145 Jy ! Component: 250 - total flux cleaned = 0.00812856 Jy ! Component: 300 - total flux cleaned = 0.00857767 Jy ! Component: 350 - total flux cleaned = 0.00868763 Jy ! Component: 400 - total flux cleaned = 0.009016 Jy ! Total flux subtracted in 400 components = 0.009016 Jy ! Clean residual min=-0.005022 max=0.005293 Jy/beam ! Clean residual mean=-0.000010 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 2.55457 Jy selfcal ! Performing phase self-cal ! Adding 93 model components to the UV plane model. ! The established model now contains 494 components and 2.55457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.062534Jy sigma=1.744328 ! Fit after self-cal, rms=1.062562Jy sigma=1.744127 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.4, 2.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272514 Jy ! Component: 100 - total flux cleaned = 0.00271622 Jy ! Component: 150 - total flux cleaned = 0.00296073 Jy ! Component: 200 - total flux cleaned = 0.00331695 Jy ! Component: 250 - total flux cleaned = 0.00377384 Jy ! Component: 300 - total flux cleaned = 0.00388454 Jy ! Component: 350 - total flux cleaned = 0.00421225 Jy ! Component: 400 - total flux cleaned = 0.00442863 Jy ! Total flux subtracted in 400 components = 0.00442863 Jy ! Clean residual min=-0.004660 max=0.004731 Jy/beam ! Clean residual mean=-0.000011 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 2.559 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 515 components and 2.559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.062334Jy sigma=1.738741 ! Fit after self-cal, rms=1.062327Jy sigma=1.738489 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Added new window around map position (49, 3.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018969 Jy ! Component: 100 - total flux cleaned = 0.00178391 Jy ! Component: 150 - total flux cleaned = 0.00143981 Jy ! Component: 200 - total flux cleaned = 0.00132928 Jy ! Component: 250 - total flux cleaned = 0.00122592 Jy ! Component: 300 - total flux cleaned = 0.0013283 Jy ! Component: 350 - total flux cleaned = 0.0013297 Jy ! Component: 400 - total flux cleaned = 0.00153562 Jy ! Total flux subtracted in 400 components = 0.00153562 Jy ! Clean residual min=-0.004503 max=0.004499 Jy/beam ! Clean residual mean=-0.000010 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 2.56054 Jy ! Performing phase self-cal ! Adding 98 model components to the UV plane model. ! The established model now contains 542 components and 2.56053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.062194Jy sigma=1.733187 ! Fit after self-cal, rms=1.062194Jy sigma=1.732988 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Added new window around map position (-30.2, 5). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230979 Jy ! Component: 100 - total flux cleaned = 0.00278219 Jy ! Component: 150 - total flux cleaned = 0.00289225 Jy ! Component: 200 - total flux cleaned = 0.00331237 Jy ! Component: 250 - total flux cleaned = 0.00351645 Jy ! Component: 300 - total flux cleaned = 0.00361711 Jy ! Component: 350 - total flux cleaned = 0.00371486 Jy ! Component: 400 - total flux cleaned = 0.00381341 Jy ! Total flux subtracted in 400 components = 0.00381341 Jy ! Clean residual min=-0.004372 max=0.004248 Jy/beam ! Clean residual mean=-0.000010 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 2.56435 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 568 components and 2.56435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.062023Jy sigma=1.728660 ! Fit after self-cal, rms=1.061990Jy sigma=1.728481 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.061990Jy sigma=1.728481 ! Fit after self-cal, rms=1.044792Jy sigma=1.726762 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=1.145 mas, bmaj=1.221 mas, bpa=-23.34 degrees ! Estimated noise=0.626212 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341353 Jy ! Component: 100 - total flux cleaned = 0.00503888 Jy ! Component: 150 - total flux cleaned = 0.00612778 Jy ! Component: 200 - total flux cleaned = 0.00665012 Jy ! Component: 250 - total flux cleaned = 0.00705834 Jy ! Component: 300 - total flux cleaned = 0.00725984 Jy ! Component: 350 - total flux cleaned = 0.00745782 Jy ! Component: 400 - total flux cleaned = 0.00765111 Jy ! Total flux subtracted in 400 components = 0.00765111 Jy ! Clean residual min=-0.004375 max=0.004327 Jy/beam ! Clean residual mean=-0.000008 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 2.572 Jy selfcal ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 580 components and 2.572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.044609Jy sigma=1.723196 ! Fit after self-cal, rms=1.044585Jy sigma=1.723091 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000715129 Jy ! Component: 100 - total flux cleaned = 0.000714788 Jy ! Component: 150 - total flux cleaned = 0.000810247 Jy ! Component: 200 - total flux cleaned = 0.000997758 Jy ! Component: 250 - total flux cleaned = 0.0010901 Jy ! Component: 300 - total flux cleaned = 0.00108913 Jy ! Component: 350 - total flux cleaned = 0.00127098 Jy ! Component: 400 - total flux cleaned = 0.0013636 Jy ! Total flux subtracted in 400 components = 0.0013636 Jy ! Clean residual min=-0.004379 max=0.004250 Jy/beam ! Clean residual mean=-0.000009 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 2.57337 Jy ! Performing phase self-cal ! Adding 118 model components to the UV plane model. ! The established model now contains 589 components and 2.57337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.044486Jy sigma=1.720735 ! Fit after self-cal, rms=1.044479Jy sigma=1.720695 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.044479Jy sigma=1.720695 ! Fit after self-cal, rms=1.048921Jy sigma=1.637145 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=2.585 mas, bmaj=3.744 mas, bpa=-68.11 degrees ! Estimated noise=0.687722 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025135 Jy ! Component: 100 - total flux cleaned = 0.00373279 Jy ! Component: 150 - total flux cleaned = 0.00439327 Jy ! Component: 200 - total flux cleaned = 0.00501126 Jy ! Component: 250 - total flux cleaned = 0.00546719 Jy ! Component: 300 - total flux cleaned = 0.00590178 Jy ! Component: 350 - total flux cleaned = 0.0062016 Jy ! Component: 400 - total flux cleaned = 0.00649182 Jy ! Total flux subtracted in 400 components = 0.00649182 Jy ! Clean residual min=-0.004450 max=0.003779 Jy/beam ! Clean residual mean=-0.000006 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 2.57986 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 630 components and 2.57986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.048894Jy sigma=1.634995 ! Fit after self-cal, rms=1.048948Jy sigma=1.634885 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000570928 Jy ! Component: 100 - total flux cleaned = 0.000801561 Jy ! Component: 150 - total flux cleaned = 0.00102158 Jy ! Component: 200 - total flux cleaned = 0.00118077 Jy ! Component: 250 - total flux cleaned = 0.00133636 Jy ! Component: 300 - total flux cleaned = 0.0015368 Jy ! Component: 350 - total flux cleaned = 0.00163469 Jy ! Component: 400 - total flux cleaned = 0.0018253 Jy ! Total flux subtracted in 400 components = 0.0018253 Jy ! Clean residual min=-0.004380 max=0.003697 Jy/beam ! Clean residual mean=-0.000007 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 2.58168 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 656 components and 2.58168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.048946Jy sigma=1.633855 ! Fit after self-cal, rms=1.048931Jy sigma=1.633799 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=1.148 mas, bmaj=1.222 mas, bpa=-24.17 degrees ! Estimated noise=0.626783 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.148 x 1.222 at -24.17 degrees (North through East) ! Clean map min=-0.0061441 max=1.7459 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.048931Jy sigma=1.633799 ! Fit after self-cal, rms=1.535183Jy sigma=1.360569 ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=1.146 mas, bmaj=1.221 mas, bpa=-23.4 degrees ! Estimated noise=0.626446 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112946 Jy ! Component: 100 - total flux cleaned = 0.00135217 Jy ! Component: 150 - total flux cleaned = 0.00145528 Jy ! Component: 200 - total flux cleaned = 0.00145601 Jy ! Component: 250 - total flux cleaned = 0.00145892 Jy ! Component: 300 - total flux cleaned = 0.00155472 Jy ! Component: 350 - total flux cleaned = 0.00155481 Jy ! Component: 400 - total flux cleaned = 0.00173381 Jy ! Total flux subtracted in 400 components = 0.00173381 Jy ! Clean residual min=-0.004216 max=0.003898 Jy/beam ! Clean residual mean=0.000000 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 2.58342 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 685 components and 2.58342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.535162Jy sigma=1.356893 ! Fit after self-cal, rms=1.535209Jy sigma=1.356816 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.69663e-05 Jy ! Component: 100 - total flux cleaned = 7.73871e-08 Jy ! Component: 150 - total flux cleaned = 3.62944e-06 Jy ! Component: 200 - total flux cleaned = 8.93537e-05 Jy ! Component: 250 - total flux cleaned = 8.82921e-05 Jy ! Component: 300 - total flux cleaned = 0.000171572 Jy ! Component: 350 - total flux cleaned = 9.10439e-05 Jy ! Component: 400 - total flux cleaned = 0.00017105 Jy ! Total flux subtracted in 400 components = 0.00017105 Jy ! Clean residual min=-0.004166 max=0.003777 Jy/beam ! Clean residual mean=-0.000000 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 2.58359 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 706 components and 2.58359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.535157Jy sigma=1.354386 ! Fit after self-cal, rms=1.535188Jy sigma=1.354349 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.535188Jy sigma=1.354349 ! Fit after self-cal, rms=1.525423Jy sigma=1.354086 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=0.7693 mas, bmaj=0.965 mas, bpa=-1.719 degrees ! Estimated noise=1.11688 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.34311 Jy ! Component: 100 - total flux cleaned = 1.65224 Jy ! Component: 150 - total flux cleaned = 1.78467 Jy ! Component: 200 - total flux cleaned = 1.88167 Jy ! Component: 250 - total flux cleaned = 1.95871 Jy ! Component: 300 - total flux cleaned = 2.02125 Jy ! Component: 350 - total flux cleaned = 2.07317 Jy ! Component: 400 - total flux cleaned = 2.11701 Jy ! Total flux subtracted in 400 components = 2.11701 Jy ! Clean residual min=-0.012831 max=0.026885 Jy/beam ! Clean residual mean=-0.000015 rms=0.004059 Jy/beam ! Combined flux in latest and established models = 2.11701 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 101 model components to the UV plane model. ! The established model now contains 101 components and 2.11701 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=1.146 mas, bmaj=1.221 mas, bpa=-23.37 degrees ! Estimated noise=0.626536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0815418 Jy ! Component: 100 - total flux cleaned = 0.139383 Jy ! Component: 150 - total flux cleaned = 0.183075 Jy ! Component: 200 - total flux cleaned = 0.217108 Jy ! Component: 250 - total flux cleaned = 0.244545 Jy ! Component: 300 - total flux cleaned = 0.267434 Jy ! Component: 350 - total flux cleaned = 0.286771 Jy ! Component: 400 - total flux cleaned = 0.303539 Jy ! Total flux subtracted in 400 components = 0.303539 Jy ! Clean residual min=-0.007985 max=0.012709 Jy/beam ! Clean residual mean=0.000048 rms=0.002738 Jy/beam ! Combined flux in latest and established models = 2.42055 Jy ! Adding 196 model components to the UV plane model. ! The established model now contains 274 components and 2.42055 Jy ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Added new window around map position (-0.8, -1.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151986 Jy ! Component: 100 - total flux cleaned = 0.028312 Jy ! Component: 150 - total flux cleaned = 0.0400198 Jy ! Component: 200 - total flux cleaned = 0.0505945 Jy ! Component: 250 - total flux cleaned = 0.0601839 Jy ! Component: 300 - total flux cleaned = 0.0689312 Jy ! Component: 350 - total flux cleaned = 0.076991 Jy ! Component: 400 - total flux cleaned = 0.0841715 Jy ! Total flux subtracted in 400 components = 0.0841715 Jy ! Clean residual min=-0.005882 max=0.006663 Jy/beam ! Clean residual mean=0.000023 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 2.50472 Jy ! Adding 127 model components to the UV plane model. ! The established model now contains 363 components and 2.50472 Jy ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Added new window around map position (-14.4, -16.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00779671 Jy ! Component: 100 - total flux cleaned = 0.0136772 Jy ! Component: 150 - total flux cleaned = 0.0189194 Jy ! Component: 200 - total flux cleaned = 0.0240753 Jy ! Component: 250 - total flux cleaned = 0.0289267 Jy ! Component: 300 - total flux cleaned = 0.0334996 Jy ! Component: 350 - total flux cleaned = 0.0376191 Jy ! Component: 400 - total flux cleaned = 0.0407963 Jy ! Total flux subtracted in 400 components = 0.0407963 Jy ! Clean residual min=-0.005269 max=0.004857 Jy/beam ! Clean residual mean=0.000008 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 2.54552 Jy ! Adding 118 model components to the UV plane model. ! The established model now contains 434 components and 2.54552 Jy ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=2.584 mas, bmaj=3.743 mas, bpa=-68.12 degrees ! Estimated noise=0.687876 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647034 Jy ! Component: 100 - total flux cleaned = 0.0105868 Jy ! Component: 150 - total flux cleaned = 0.0139294 Jy ! Component: 200 - total flux cleaned = 0.0168348 Jy ! Component: 250 - total flux cleaned = 0.0192034 Jy ! Component: 300 - total flux cleaned = 0.0214165 Jy ! Component: 350 - total flux cleaned = 0.0233448 Jy ! Component: 400 - total flux cleaned = 0.0252994 Jy ! Total flux subtracted in 400 components = 0.0252994 Jy ! Clean residual min=-0.005667 max=0.004408 Jy/beam ! Clean residual mean=0.000001 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 2.57082 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131984 Jy ! Component: 100 - total flux cleaned = 0.00244794 Jy ! Component: 150 - total flux cleaned = 0.00364302 Jy ! Component: 200 - total flux cleaned = 0.00466831 Jy ! Component: 250 - total flux cleaned = 0.00532502 Jy ! Component: 300 - total flux cleaned = 0.00616571 Jy ! Component: 350 - total flux cleaned = 0.0067714 Jy ! Component: 400 - total flux cleaned = 0.00725956 Jy ! Total flux subtracted in 400 components = 0.00725956 Jy ! Clean residual min=-0.005137 max=0.003989 Jy/beam ! Clean residual mean=-0.000001 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 2.57808 Jy ! Adding 161 model components to the UV plane model. ! The established model now contains 568 components and 2.57808 Jy ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! Estimated beam: bmin=1.146 mas, bmaj=1.221 mas, bpa=-23.37 degrees ! Estimated noise=0.626536 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000895187 Jy ! Component: 100 - total flux cleaned = -0.000256752 Jy ! Component: 150 - total flux cleaned = 0.000473478 Jy ! Component: 200 - total flux cleaned = 0.00105895 Jy ! Component: 250 - total flux cleaned = 0.00150916 Jy ! Component: 300 - total flux cleaned = 0.00205562 Jy ! Component: 350 - total flux cleaned = 0.00258203 Jy ! Component: 400 - total flux cleaned = 0.00298969 Jy ! Total flux subtracted in 400 components = 0.00298969 Jy ! Clean residual min=-0.004405 max=0.004191 Jy/beam ! Clean residual mean=-0.000001 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 2.58107 Jy selfcal ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 611 components and 2.58107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.524400Jy sigma=1.355327 ! Fit after self-cal, rms=1.523580Jy sigma=1.352634 wmodel /scr/pima/rdv62_uvs/J2038+5119_X_map.mod ! Writing 611 model components to file: /scr/pima/rdv62_uvs/J2038+5119_X_map.mod wobs /scr/pima/rdv62_uvs/J2038+5119_X_uvs.fits ! Applying 867 buffered edits. ! Writing UV FITS file: /scr/pima/rdv62_uvs/J2038+5119_X_uvs.fits wwins /scr/pima/rdv62_uvs/J2038+5119_X_map.win ! wwins: Wrote 18 windows to /scr/pima/rdv62_uvs/J2038+5119_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000536082 Jy ! Component: 100 - total flux cleaned = -0.000823611 Jy ! Component: 150 - total flux cleaned = -0.00102957 Jy ! Component: 200 - total flux cleaned = -0.00142935 Jy ! Component: 250 - total flux cleaned = -0.00168675 Jy ! Component: 300 - total flux cleaned = -0.00175167 Jy ! Component: 350 - total flux cleaned = -0.00206274 Jy ! Component: 400 - total flux cleaned = -0.00236586 Jy ! Component: 450 - total flux cleaned = -0.00254472 Jy ! Component: 500 - total flux cleaned = -0.00278053 Jy ! Component: 550 - total flux cleaned = -0.00307094 Jy ! Component: 600 - total flux cleaned = -0.00324332 Jy ! Component: 650 - total flux cleaned = -0.00335631 Jy ! Component: 700 - total flux cleaned = -0.00357984 Jy ! Component: 750 - total flux cleaned = -0.00374542 Jy ! Component: 800 - total flux cleaned = -0.00390939 Jy ! Component: 850 - total flux cleaned = -0.00407098 Jy ! Component: 900 - total flux cleaned = -0.0040179 Jy ! Component: 950 - total flux cleaned = -0.00428382 Jy ! Component: 1000 - total flux cleaned = -0.00433677 Jy ! Component: 1050 - total flux cleaned = -0.00449327 Jy ! Component: 1100 - total flux cleaned = -0.00433746 Jy ! Component: 1150 - total flux cleaned = -0.00449168 Jy ! Component: 1200 - total flux cleaned = -0.00438928 Jy ! Component: 1250 - total flux cleaned = -0.00454125 Jy ! Component: 1300 - total flux cleaned = -0.0046913 Jy ! Component: 1350 - total flux cleaned = -0.00464105 Jy ! Component: 1400 - total flux cleaned = -0.00464037 Jy ! Component: 1450 - total flux cleaned = -0.00464008 Jy ! Component: 1500 - total flux cleaned = -0.0044939 Jy ! Component: 1550 - total flux cleaned = -0.00454261 Jy ! Component: 1600 - total flux cleaned = -0.00449478 Jy ! Component: 1650 - total flux cleaned = -0.0046386 Jy ! Component: 1700 - total flux cleaned = -0.00454311 Jy ! Component: 1750 - total flux cleaned = -0.00444835 Jy ! Component: 1800 - total flux cleaned = -0.00435458 Jy ! Component: 1850 - total flux cleaned = -0.00454111 Jy ! Component: 1900 - total flux cleaned = -0.00435596 Jy ! Component: 1950 - total flux cleaned = -0.00440204 Jy ! Component: 2000 - total flux cleaned = -0.00426484 Jy ! Component: 2050 - total flux cleaned = -0.00435585 Jy ! Component: 2100 - total flux cleaned = -0.00435589 Jy ! Component: 2150 - total flux cleaned = -0.0043107 Jy ! Component: 2200 - total flux cleaned = -0.00440004 Jy ! Component: 2250 - total flux cleaned = -0.0042219 Jy ! Component: 2300 - total flux cleaned = -0.00448757 Jy ! Component: 2350 - total flux cleaned = -0.00457588 Jy ! Component: 2400 - total flux cleaned = -0.00475107 Jy ! Component: 2450 - total flux cleaned = -0.00475151 Jy ! Component: 2500 - total flux cleaned = -0.00488169 Jy ! Component: 2550 - total flux cleaned = -0.00488151 Jy ! Component: 2600 - total flux cleaned = -0.00501053 Jy ! Component: 2650 - total flux cleaned = -0.00501085 Jy ! Component: 2700 - total flux cleaned = -0.00513852 Jy ! Component: 2750 - total flux cleaned = -0.00518057 Jy ! Component: 2800 - total flux cleaned = -0.00522237 Jy ! Component: 2850 - total flux cleaned = -0.00509693 Jy ! Component: 2900 - total flux cleaned = -0.00517984 Jy ! Component: 2950 - total flux cleaned = -0.0051797 Jy ! Component: 3000 - total flux cleaned = -0.00522098 Jy ! Component: 3050 - total flux cleaned = -0.00550867 Jy ! Component: 3100 - total flux cleaned = -0.00534506 Jy ! Component: 3150 - total flux cleaned = -0.00542657 Jy ! Component: 3200 - total flux cleaned = -0.00506149 Jy ! Component: 3250 - total flux cleaned = -0.00518266 Jy ! Component: 3300 - total flux cleaned = -0.00534321 Jy ! Component: 3350 - total flux cleaned = -0.00542319 Jy ! Component: 3400 - total flux cleaned = -0.00522364 Jy ! Component: 3450 - total flux cleaned = -0.00514444 Jy ! Component: 3500 - total flux cleaned = -0.00522349 Jy ! Component: 3550 - total flux cleaned = -0.00534171 Jy ! Component: 3600 - total flux cleaned = -0.00518438 Jy ! Component: 3650 - total flux cleaned = -0.00526251 Jy ! Component: 3700 - total flux cleaned = -0.00510641 Jy ! Component: 3750 - total flux cleaned = -0.00518429 Jy ! Component: 3800 - total flux cleaned = -0.00495253 Jy ! Component: 3850 - total flux cleaned = -0.00491392 Jy ! Component: 3900 - total flux cleaned = -0.00487562 Jy ! Component: 3950 - total flux cleaned = -0.00456948 Jy ! Component: 4000 - total flux cleaned = -0.0046076 Jy ! Component: 4050 - total flux cleaned = -0.00437967 Jy ! Total flux subtracted in 4096 components = -0.00434193 Jy ! Clean residual min=-0.002174 max=0.002297 Jy/beam ! Clean residual mean=0.000011 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 2.57672 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 947 components and 2.57673 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv62_uvs/J2038+5119_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.146 x 1.221 at -23.37 degrees (North through East) ! Clean map min=-0.0049294 max=1.7476 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv62_uvs/J2038+5119_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 2.54% of the data. ! The x-axis pixel size should ideally be below 0.1667 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 1.7475 rms= 0.00065 Jy quit ! Quitting program ! Log file /scr/pima/rdv62_uvs/J2038+5119_X_uvs.log closed on Fri Nov 22 22:41:56 2013